diff options
272 files changed, 17 insertions, 27398 deletions
diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..d7b82bc --- /dev/null +++ b/.gitattributes @@ -0,0 +1,4 @@ +*.txt text eol=lf +*.htm text eol=lf +*.html text eol=lf +*.md text eol=lf diff --git a/LICENSE.txt b/LICENSE.txt new file mode 100644 index 0000000..6312041 --- /dev/null +++ b/LICENSE.txt @@ -0,0 +1,11 @@ +This eBook, including all associated images, markup, improvements, +metadata, and any other content or labor, has been confirmed to be +in the PUBLIC DOMAIN IN THE UNITED STATES. + +Procedures for determining public domain status are described in +the "Copyright How-To" at https://www.gutenberg.org. + +No investigation has been made concerning possible copyrights in +jurisdictions other than the United States. Anyone seeking to utilize +this eBook outside of the United States should confirm copyright +status under the laws that apply to them. diff --git a/README.md b/README.md new file mode 100644 index 0000000..f31cd4c --- /dev/null +++ b/README.md @@ -0,0 +1,2 @@ +Project Gutenberg (https://www.gutenberg.org) public repository for +eBook #67166 (https://www.gutenberg.org/ebooks/67166) diff --git a/old/67166-0.txt b/old/67166-0.txt deleted file mode 100644 index a7a3928..0000000 --- a/old/67166-0.txt +++ /dev/null @@ -1,8615 +0,0 @@ -The Project Gutenberg eBook of Self-Help Mechanical Drawing, by -Nehemiah Hawkins - -This eBook is for the use of anyone anywhere in the United States and -most other parts of the world at no cost and with almost no restrictions -whatsoever. You may copy it, give it away or re-use it under the terms -of the Project Gutenberg License included with this eBook or online at -www.gutenberg.org. If you are not located in the United States, you -will have to check the laws of the country where you are located before -using this eBook. - -Title: Self-Help Mechanical Drawing - An Educational Treatise - -Author: Nehemiah Hawkins - -Release Date: January 15, 2022 [eBook #67166] - -Language: English - -Produced by: deaurider, Harry Lamé and the Online Distributed - Proofreading Team at https://www.pgdp.net (This file was - produced from images generously made available by The - Internet Archive) - -*** START OF THE PROJECT GUTENBERG EBOOK SELF-HELP MECHANICAL -DRAWING *** - - - - Transcriber’s Notes - - Text printed in italics in the source document has been transcribed - _between underscores_, bold face text =between equal signs=. Small - capitals have been replaced with ALL CAPITALS. - - More Transcriber’s Notes may be found at the end of this text. - - -[Illustration] - - -[Illustration] - - - - - SELF-HELP - - MECHANICAL DRAWING - - AN EDUCATIONAL TREATISE - -[Illustration] - - - - - “_LEARN TO DO A THING BY DOING IT._”--_OLD PROVERB_ - - SELF-HELP - MECHANICAL DRAWING - - _AN EDUCATIONAL TREATISE_ - - [Illustration] - - BY - N. HAWKINS, M. E. - - _Author of Handbook of Calculations, etc._ - - _New York_: THEO. AUDEL & CO., Publishers - 1902 - - - _Copyrighted - by - Theo. Audel & Co. - New York - 1902_ - - - _This work - is - most kindly and - respectfully dedicated to - THE COMING MAN - who at the present time - is undoubtedly devoting - a goodly share of - his spare time to - the study of - drawing._ - - -[Illustration] - - -[Illustration: INTRODUCTION] - - - - -Preface. - - -_It is because of a personal and practical experience of the advantage -to be gained by the possession of a knowledge of drawing, that the -author is prompted to undertake the rather pleasant task of producing a -self-help book relating to the subject._ - -_Since the days of youthful endeavor, the author has passed through an -extended experience of mechanical life, and scarcely ever without chalk, -pencil or instrument in hand, to illustrate by sketch or drawing, the -tools to be employed, or to picture the finished product; accordingly, -throughout this work, words of explanation and the drawings will go -together to aid the diligent student._ - -_It has been said by an eminent writer, that “one workman is superior to -another--other circumstances being the same--directly in proportion to -his knowledge in drawing, and those who are ignorant of it must in many -respects be subservient to others who have obtained that knowledge.”_ - -_It has been also said that no man is fitted to be foreman of a shop who -cannot draw, and it is generally true that no one will be appointed to -that position, except temporarily, who does not possess some knowledge -of the art, either “freehand” or instrumental._ - -_It is a question how far a good working knowledge of drawing can be -attained without a teacher; it is true that but few have become -proficient without such aid, but it is equally true that “self-help” has -been the key note to all advancement._ - -_The author received personal instruction in several ways and times, at -home, in school, in an architect’s office, and under an experienced -mechanical engineer, but it was in the early morning hours of a bright -summer time--lang syne--that he made his first serious attempt to master -the art of mechanical drawing. It was a struggle and a battle to hold -himself down to “the board” to the finish, but it was a victory--one, -won over slothfulness and impatience, and of such a nature as to warrant -the use of the term “self-help” to the encouragement of others._ - -_In conclusion two sentiments may be added; if a good working knowledge -of drawing is “worth the while” then, 1, the student should be -thoroughly in earnest in acquiring it; 2, he should be willing to take -sufficient time and give much hard study to gain the skill necessary for -success._ - -_This persistence is not irksome. It carries its own reward, and the -results are definite and sure._ - - “_One step and then another, and the longest walk is ended; - One stitch and then another, and the largest rent is mended. - One brick upon another, and the highest wall is made; - One flake upon another, and the deepest snow is laid._” - - - - -Introduction. - - -Drawing is one of the arts; art relates to something to be done, and art -in the industrial and mechanical sense aims chiefly at utility, and is -governed by exact rules; hence mechanical drawing--so-called--tends -first to be useful and helpful, and second to accuracy in execution, -including most minute details; it aspires to the perfection of nature in -adaptability of the means to the end. - -Drawing constitutes a universal language, to acquire which is a matter -of importance, for by its use one is able to illustrate the form and -dimensions of an object, device, or utility, in very much less time, and -far more clearly, than by a verbal description. - -To a person who may not be able perfectly to understand the language of -a country, to be able to draw is an aid and a safeguard; to use the -words of Sir Joshua Reynolds, “the pencil speaks the language of every -land.” - -In extensive iron works and metal-working establishments the designer -and draughtsman is always in demand. His services are indispensable and -his position is a highly responsible one. It becomes his special -province to design improvements, to furnish sketches and to make -finished drawings; to calculate strains, strength, power, motion, -weight, friction and durability. All this and much more is the -professional draughtsman’s work. - -In “directory” classification, he who accomplishes such comprehensive -results as above described is termed a “Draughtsman,” but the word has -as wide a meaning as “Engineer,” which takes in civil, mechanical, -naval, sanitary, steam and other engineering specialists. So, in -drafting, it includes the office boy employed in making blue prints, it -embraces the copyists, tracers and assistants, as well as the head -draughtsman and chief engineer. - -Consequently the range is wide, and the line hard to draw between -draughtsmen who work with their hands, and those who work with their -brains. It may be added that the best men are too frequently -undervalued, owing to the unavoidable difficulty in distinguishing the -difference in true worth, between the two widely separated classes. - -It may be remarked that they only draw well who draw intelligently; -aptness in this, as in many other virtues, is a matter of slow growth, -“here a line and there a line”--it’s the proper direction, not the rate -of progress, that counts in the end. - -There are several methods of drawing--1, Free-hand; 2, Instrumental; 3, -Geometrical; 4. Perspective. In the first the work, also termed -sketching, is executed by pencil, pen, crayon, or even paint-brush; in -the second the result is attained by the use of rule, tee-square, -drawing pen, etc.; this method is also denominated mechanical drawing, -and suggests the title of this volume. - -The great usefulness, not to say necessity, of readiness in executing -accurately, drawings “to scale,” is emphasized by the fact that now, -more than ever, is all machinery designed, and it may almost be said, is -“built,” in the draughting room--this is a valuable hint relating to -“reading” drawings. - -It is wise, as well as easy, to begin at the beginning of things; thus, -it is altogether the good part to mount a ladder by the first and second -rounds rather than to attempt it by taking the third, sixth, ninth, -etc.--especially are first and second rounds the very best to start -upon; “Chalk-work,” is the first subject introduced, next, that of -“Free-hand.” These are the first steps leading upward in this most -agreeable attainment--skill in illustrating and designing of objects, -tools, and utilities. - -A single word of advice before introducing the elementary work connected -with mechanical drawing: if the student should experience difficulty in -mastering the diagrams and curves abounding in this book, let him -consult an experienced draughtsman or teacher, who, by a few strokes of -a lead pencil, can easily make them plain; that knowledge--which cannot -be printed or self-taught--termed _the Craftsman’s Art_, is communicated -largely by personal telling and showing, from man to man; in drawing, -this help should be thankfully availed of, when necessity arises. - - NOTE.--Sketching is often in demand because there is no time for - finished or careful drawings, and the one who can draw a few lines in - a moment to let a sudden necessity be known, is the man of the hour. - All candidates for First Class Engineer’s Certificates in marine - service in the navy have to undergo an examination in rough drawing; - this is intended not so much as a proof of the applicant possessing - the capability of a draughtsman, but in the event of any injury to the - engines in his charge, so that he may be able to send to his - Superintendent a rough drawing of the particular part, properly - dimensioned, so that it could be worked from, and time saved on the - arrival of the ship at the port where the repairs are to be done. - -[Illustration] - - -[Illustration: PLAN OF THE WORK] - - “_No matter how thorough our education may have been at the first, - rules and formulas will slip from the memory, and every day’s - experience gives additional evidence of the truth of the old adage - that_ ‘THE KEY THAT RESTS, RUSTS.’”--SIMPSON BALLARD. - - - - -The Plan of the Work. - - -The purpose or scope of this work may be briefly stated: It is to aid -the aspiring student in making the first advance towards a thorough and -useful knowledge of drawing in its several divisions, as elsewhere -defined. - -The method to be followed in presenting the subject will be the natural -order clearly and simply defined, as “from the less to the greater.” - -The first subject to be discussed comes under the heading of chalk-work, -_i. e._, such drawings as can be executed on a blackboard, a floor, or -even on more primitive surfaces, such as a smooth stone or board. - -This is indeed a lowly beginning, but the author is quite confident it -will awaken as much interest as any part of the book--even in the most -experienced in the art of drawing, as to them it will revive the -ambitions and first crude attempts made in the golden days of their -youth. - -Let it be clearly understood by all, and especially by those who wish to -learn drawing, that the study of this delightful art does not require -any special qualification. We need only ask one question: Have you -learned to write? If so, be assured you may learn to draw, but to all -the same rule applies, first the elements of the art, and afterwards the -more advanced study. - -It is not expected that all should exhibit a decided taste for drawing, -for the possession of this is rather a gift of nature than the result of -education; but a knowledge of principles and a certain amount of -executive ability may be obtained by every one of average capacity, and -whatever the natural power may be, it will be increased and developed by -exercise; if the progress is steady and continuous and in the right -direction, success is sure to crown the work. - -The second division of the book will be free-hand drawing, _i. e._, that -which is executed without instruments. Nothing to instruct has been -spared in this important step in the path of advancement. - -The illustrations accompanying the two opening sections have been made -designedly elementary, for there are many who have a taste for drawing -and who have a desire to learn, who from place of residence or other -circumstances have not the opportunity of receiving the assistance of a -master. To such this book presents itself as a friend directing to the -right road, talking, reasoning, and explaining by the way. - -The “chalk-work” and “free-hand” sections of the book relate to the -foundations upon which all must rest who seek the aid to be derived from -the art; hence, the following pages are written with a view to encourage -all, and those who are prepared to follow the directions given in them -may look forward to the possession of sufficient drawing power to add to -their usefulness in after life. - -At this point of attainment there arises a need to know the meaning of -many words and phrases used by draughtsmen; these are grouped -alphabetically from A to Z under the heading of,---- - -Useful Terms and Definitions: Memorizing these few pages will be of -benefit, as an intimate knowledge of the language of the drawing office -stamps a man as worthy of a hearing, and assures attention to anything -which he may write or say pertaining to the art. - -After the Definitions the subject explained will be the Instruments and -Materials used in mechanical drawings; following in due course appear -Geometrical and Mechanical Drawing, Gearing, Linear Perspective, -Projection, Shading, Tracing, Lettering, Drawing Office Rules, Reading -Drawings, Useful Tables and a General Index, to which the student is -referred. A careful reading is requested to the following helpful note. - -Grateful acknowledgment is made to George Perrott, Esq., M. E., for -practical and technical assistance throughout the work, and to Theo. -Lucas, Engineer, for text and illustrations in the portions of the book -relating to Linear Perspective and Projection. - - NOTE.--In MACHINERY Prof. Chas. H. Benjamin says, referring to - drawing, under heading “How and what to study,” “... I have so far - said nothing about drawing, for I do not think it of much use to learn - that, until you know what you want of it. All this time that you have - been studying mechanism you should have had a sketch book or pad of - note paper, and made free hand sketches of mechanical movements which - interested you and of various machine details. You should accustom - yourself to use drawing as a means of expressing ideas, just as you - use written words, so that it becomes a second nature to you to sketch - anything you wish to remember or describe. If you work from - blue-prints in the shop, or if you can borrow some to study, this will - help you to understand how a drawing is made. You can get some drawing - instruments at any time and begin to practice on drawing straight - lines and circles, so as to become familiar with the instruments. And - here it will be of great benefit to you if you can attend an evening - drawing school for one night in the week at least. - - “When you have become sufficiently familiar with the principles of - drawing, a book on mechanism will tell you how to draw gear teeth and - cams, and how to design various link motions. Make up your own - problems from what you see in the shop and make your drawing a means - to an end and not the principal thing; it is of little use to be able - to make a nice drawing unless you know what to draw and why. - - “Drawing is a convenient tool as an aid in expressing to others the - ideas which you wish to convey; in all cases take the problems and the - ideas from your every-day work and that which is around you; your - success will depend upon the close connection which you keep at all - times between your acquired knowledge and your practical work.” - - - - -General List of Contents. - - - INTRODUCTION, 1-24 - - CHALK WORK, 25-38 - - PRELIMINARY TERMS AND DEFINITIONS, 39-52 - - FREEHAND DRAWING, 53-78 - - GEOMETRICAL DRAWING, 79-100 - - DRAWING MATERIALS AND INSTRUMENTS, 101-134 - - MECHANICAL DRAWING, 135-188 - - PENCILING, 139-147 - - PROJECTION, 148-164 - - INKING IN DRAWINGS, 167-170 - - LETTERING DRAWINGS, 171-175 - - DIMENSIONING DRAWINGS, 176-179 - - SHADING DRAWINGS, 180-181 - - SECTION LINING AND COLORS, 182-185 - - REPRODUCING DRAWINGS, 186-188 - - DRAWING OFFICE RULES, 189-195 - - GEARING, 197-208 - - DESIGNING GEARS, 209-216 - - WORKING DRAWINGS, 219-227 - - READING WORKING DRAWINGS, 228-230 - - PATENT OFFICE RULES FOR DRAWINGS, 231-236 - - USEFUL HINTS AND “POINTS,” 237-244 - - LINEAR PERSPECTIVE, 245-265 - - PERSONAL, BY THE EDITOR, 281 - - USEFUL TABLES, 269-280 - - REFERENCE INDEX, 283 - - -[Illustration: CHALK-WORK] - - - The peculiarity of all art is that it cannot - be communicated in writing alone, craft is a - term which is synonymous with art; a craft - requires manual dexterity which cannot be - taught in books. - - - - -Chalk Work. - - -The blackboard has been well called the great weapon of the modern -educator; this is especially true in reference to instruction in an art -dealing with lines, curves and figures. - -[Illustration: Fig. 6.] - -Many a man can chalk out on a blackboard, or on a piece of sheet-iron, -or on the floor, just what he wants to show, and make his meaning very -plain; hence, in every workshop, and many other places, a blackboard is -more than useful, and it has been said that no draughting office is -complete without one. - -Fig. 6 represents a chalk-crayon. - -[Illustration: Fig. 7.] - -[Illustration: Fig. 8.] - -Figs. 7 and 8 need no explanation, as they represent two forms of the -well-known blackboard. - -Chalk lines have this advantage--they are easily altered or rubbed out -when not needed any longer. The work executed upon a blackboard is -mostly done by hand, without aid from instruments; a few tools, however, -are useful--such as, 1, large wooden blackboard compasses holding a -crayon, which are made and sold by the trade in size twelve inches to -thirty inches in length; 2, a straight-edge; and 3, some crayons. With -the compasses circles and part of the circle can be made, and with the -straight-edge the larger lines can be drawn. - -These instruments are shown on page 29, and are, 1, compasses, for -holding chalk for making circles; 2, a tee-square; 3, a straight-edge; -4, a protractor for measuring angles; 5, a triangle 60° and 30°; 6, a -brass holder for crayons. - -Blackboard Drawing.--The use of a blackboard comes principally and -properly under the head of free-hand drawing, but its importance is such -that a separate division of the volume is assigned to it. - -[Illustration] - -Thus, chalk-work may be considered the first lesson in “free-hand,” as -all the examples can also be most profitably practiced with pencil and -paper. - -Very rapid drawing upon the board should not be encouraged, as it is -likely not to be accurate enough; again, the board should be entirely -free from grease. Cloths, sponges or chamois skin rubbers may be used to -erase or change the chalk marks. Vertical lines should be drawn from -above downward; short lines should be drawn with the fingers alone, -those somewhat longer with the hand, using the wrist-joint; the still -longer lines with the forearm, using the elbow-joint; those longer yet -with the whole arm, using the shoulder-joint; lines should always be -drawn with a uniform motion, slow enough for the eye to follow. - -Practice in chalk-work should alternate with sketching in a sketchbook -and with geometrical drawing--to be hereafter described. The student -should practice a short time on the board, at least once a week; large -sizes are the most profitable for the representations to be made; when -drawing in different directions the hand should be turned, not the paper -or board; the hand should never be allowed to obstruct the sight, hence -the hand and fingers should be held in a position of freedom--with -fingers not nearer than 1¹⁄₂ or 2 inches from the board. - - NOTE.--The first lesson of any kind the author received in drawing was - to make a straight line; this was effected by holding the pencil - nearly erect and guiding it along by the aid of the little finger held - pressed against the edge of a board; this was a useful item of - knowledge, as proved by passing years. - - A well-known artist, in telling his early experience, said: “The first - thing I was taught was to draw a line, divide it, erect a - perpendicular from its center, and afterwards to divide the angle made - by the perpendicular.” In answer to a question asking how long he was - kept at the lines, he replied, “about two months--or a month or two,” - indicating that even the longer time would have been well spent in - learning to draw a straight line. - - -PREPARATORY PRACTICE IN DRAWING. - -Every visible object is bounded by lines which enable the observer to -determine its shape. If these lines are straight or curved, the shape of -the object is regular; if broken, the shape of the object is irregular. - -The elements, then, of form are lines, straight, curved, or broken, and -these, therefore, furnish the beginning of all instruction in free-hand -or mechanical drawing. - - -PERPENDICULAR LINES. - -Fig. 15 shows six lines--upright and perpendicular, with points or -“dots” indicated at the top and bottom of each line; to draw these, -proceed thus: - -[Illustration: Fig. 15.] - -[Illustration: Fig. 16.] - -The learner should stand with his right shoulder opposite the board, and -the weight of the hand and the arm should be allowed to fall naturally; -now, make on the board two points, one being six inches above the other, -these being merely “dots,” shown at the ends of the lines, figs. 15, -etc., and made with two motions; the line between the points should now -be drawn not too quickly from the upper to the lower point; three -movements of the hand and arm complete the line; to draw the other five -lines the movements have simply to be repeated. - -If the student pronounces to himself “one,” “two,” “three,” at each -motion, it will be helpful; in this exercise, fig. 15, the aim is to -make six lines, each line being parallel to the first. Again, in the -example, it is intended that the lower point should be made first, next -the upper, and lastly the line drawn from the upper to the lower point, -but the order may be reversed; at _one_ the upper point, at _two_ the -lower, at _three_ the stroke upwards to complete the line. - - -HORIZONTAL LINES. - -To make these as shown in fig. 16, proceed as follows: With the word -_one_ make a point, with _two_ another point six inches at the left, -with _three_ draw a straight line from the left point to the right. All -added lines should be parallel: for practice, reverse the process thus, -_one_, make a “point,” at _two_ another point at the right, at _three_ -draw line to the left. - -The student will note that the two motions--at the words _one_ and -_two_--are to fix the positions of the ends of the lines; this practice -will be found useful in the most advanced examples and an item of -elementary practice never to be forgotten--like the help to be derived -by the first round of a ladder. - -[Illustration: Fig. 17.] - -[Illustration: Fig. 18.] - - -OBLIQUE LINES. - -In drawing oblique straight lines as shown in fig. 17, at the word _one_ -let the student make the lower point; at the word _two_ the upper, a -little to the right of the lower; at the word _three_ draw a line -quickly from the upper to the lower point. In pronouncing the words -_one_, _two_, _three_, let the student make the additional parallel -lines. - -As shown in fig. 18, at the word _one_ make the lower point; at the word -_two_ the upper point, a little _to the left_; at the word _three_ draw -a line rapidly from the upper to the lower point, and “timing” the -process by repeating _one_, _two_, _three_, make the additional parallel -lines. - -[Illustration: Fig. 19.] - - -BROKEN LINES. - -A broken line is composed of two or more straight lines at angles to -each other (see fig. 19). To draw them begin (saying) _one_, make a -point; _two_ a point below at the left; _three_, a point above at the -left; _four_, draw a line from the left hand point to the lower point; -at the word _five_, from the lower point to the upper right hand point. -For practice draw numerous lines in the same way, keeping them parallel -to each other, as shown in fig. 20. - -[Illustration: Fig. 20.] - -[Illustration: Fig. 21.] - -[Illustration: Fig. 22.] - -[Illustration: Fig. 24.] - -[Illustration: Fig. 23.] - -[Illustration: Fig. 25.] - -In example, fig. 21, the arrangement of the points is changed--let the -student draw at the words, as follows: _One_, a point; _two_, a point -above at the left; _three_, a point below at the left; _four_, draw from -the point at the left to the upper point; _five_, from the upper point -to the lower right hand point; continue to add parallel lines to -complete the figure as shown. - -Figs. 22 and 23 are given as examples to practice, making first the -points and then the connecting lines and afterward the parallel lines to -complete the figures. - - -CURVED LINES. - -To draw curved lines, as shown in fig. 24. At the word _one_, point; at -the word _two_, point three inches directly above; _three_, at the same -distance above again make a point; now draw a curve as shown, joining -the middle point and the upper point; now draw the curve as shown below -it; finally complete figure as shown. - -[Illustration: Fig. 26.] - -[Illustration: Fig. 27.] - -[Illustration: Fig. 28.] - -[Illustration: Fig. 29.] - -[Illustration: Fig. 30.] - -Figs. 25 to 30 are to be practiced, making first the points and then -connecting them by the curves to complete the figures. - -When two or more students are working together, with each having a -blackboard, the counting may be in concert--or a teacher could count for -a class. In these line examples care should be used in making them of -uniform length. There is a difference to be noted between a crooked line -and a broken line, the latter being a straight line and the former -deviating from it. - -Square chalk crayons are the best for hand work, as lines of an even or -uniform width can be drawn with them. - -A very fine effect is produced by using two thicknesses of chalk, one -being double the thickness of the other; the heavy lines being used on -the shade side of objects will produce a good effect, giving thickness -and body to the object. - -Round chalk crayons are used in the compasses to draw circles, but hand -lines drawn with them are not so neat as those produced with the -square-shaped chalk. - -To obliterate or remove the construction, or false lines made on the -blackboard, a wooden handle two inches in diameter with a cone end 3 or -4 inches long, covered with chamois skin or soft cloth tightly wrapped -round the cone and fastened with a tack or drawing pin, makes the best -implement to erase lines not required, the point of the cone will remove -these without destroying the lines or curves which meet them. - -Sponges, chamois skin or cloth rubbers are used to rub out the chalk -drawings and clean the blackboard. - -The best height for a diagram on the blackboard is not higher than the -head, nor lower than the elbow. - -Horizontal lines should be made from the left to the right; the body and -arm being moved with the hand, and kept in the same relative position -with it, will steady the hand. - -Curved lines to the left should be drawn first, enabling the eye to take -in not only the curve in process of formation but that already made. - -Passing the crayon in the hand, over the intended curve previous to -marking it, will guide the eye and give confidence to the hand in -chalking the curve. - -A proper distance from the blackboard is essential, the face being about -two feet away from it. - -Draw with the whole arm extended from the shoulder-joint, not from the -elbow or wrist. - -[Illustration: Fig. 31.] - -[Illustration: “There are more ways than one of telling things: by -speech, by writing, by printing, also by pictures and drawings.” -Knowles] - - -[Illustration: TERMS DEFINITIONS] - -[Illustration: ELECTRA.] - - - - -Preliminary Terms and Definitions. - - -Like all the arts, drawing has a nomenclature of its own, and nothing -can be more helpful to the beginner than to know the name of things -relating to the art of drawing. This is a language almost peculiar to -itself, and used daily and hourly by many thousands of superintendents, -foremen and master mechanics, as well as by owners, designers and -draughtsmen, hence its introduction at this early stage. - - =ALTITUDE.=--This is the elevation of an object above its base, or the - perpendicular distance between the top and bottom of a figure. - -[Illustration: Fig. 33.] - -[Illustration: Fig. 34.] - -[Illustration: Fig. 35.] - -[Illustration: Fig. 36.] - -[Illustration: Fig. 37.] - - =ANGLE= is the difference in the direction of two lines which meet or - tend to meet. The lines are called _the sides_ and the point of - meeting, the _vertex_ of the lines. - - To make an angle apparent, the two lines must meet in a point, as _A - B_ and _A C_, which meet in the point _A_, as shown in fig. 33. - - Angles are measured by degrees. - - A _Degree_ is one of the three hundred and sixty equal parts of the - space about a point in a plane. - - Angles are distinguished in respect to magnitude by the terms Right, - Acute and Obtuse Angles. - - A _Right Angle_ is that formed by one line meeting another, so as to - make equal angles with that other. - - The lines forming a right angle are _perpendicular to each other_. - - An _Acute Angle_ is less than a right angle. See Fig. 35. - - An _Obtuse Angle_ is greater than a right angle. See Fig. 36. - - Obtuse and acute angles are also called _oblique angles_; and lines - which are neither parallel nor perpendicular to each other are called - _oblique lines_. - - The _Vertex_ or _Apex_ of an angle is the point in which the including - lines meet. - - An angle is commonly designated by a letter at its vertex; but when - two or more angles have their vertices at the same point, they cannot - be thus distinguished. - - For example, when the three lines _A B_, _A C_, and _A D_ in fig. 37 - meet in the common point _A_, we designate either of the angles - formed, by three letters, placing that at the vertex between those at - the opposite extremities of the including lines. Thus, we say, the - angle _B A C_, etc. - - =APEX.=--The summit or highest point of an object. - - =ARC.=--See circle. - - =AXIS OF A SOLID.=--An imaginary straight line passing through its - center. - - =AXIS OF A FIGURE.=--A straight line passing through the center of a - figure, and dividing it into two equal parts. - - =BASE.=--The base of a solid figure is that on which it stands--the - lowest part. - - =BISECT.=--To divide into two equal parts. - - =BISECTOR.=--A line which bisects. - -[Illustration: Fig. 38.] - - =CIRCLE.=--A _Circle_ is a plane figure bounded by one uniformly - curved line, all of the points in which are at the same distance from - a certain point within, called the _Center_. - - The _Circumference_ of a circle is the curved line that bounds it. - - The _Diameter_ of a circle is a line passing through its center, and - terminating at both ends in the circumference, as _A C B_. - - The _Radius_ of a circle is a line extending from its center to any - point in the circumference. It is one-half of the diameter. All the - diameters of a circle are equal, as are also all the radii _C D_, _C - B_ and _C A_. - - An _Arc_ of a circle is any portion of the circumference, as _B D_ and - _A D_. - - _Semi-Circle._--Half a circle formed by bisecting it with a diameter, - as _A C B_. Fig. 38. - - An angle having its vertex at the center of a circle is measured by - the arc intercepted by its sides. Thus, the arc _A D_ measures the - angle _A C D_, and in general, to compare different angles, we have - but to compare the arcs, included by their sides, of the equal circles - having their centers at the vertices of the angles. - - =CIRCUMSCRIBE.=--To draw a line of figures about or outside, such as a - circle drawn around a square touching its corners or angles. - - _Inscribe._--To draw a line or figure inside or on the interior, such - as a circle drawn within a square touching its sides. - - =CONCAVE.=--Curving inwardly. - - =CONE.=--A solid body or figure having a circle for its base, and its - top terminated in a point or vertex. - - =CONSTRUCTION.=--The making of any object. - - =CONTOUR.=--The outline of the general appearance of an object. - - =CONVERGENCE.=--Lines extending towards a common point. - - =CONVEX.=--Rising or swelling into a round form--the opposite to - concave. - - =CORNER.=--The point of meeting of the edges of a solid, or the two - sides of a plane figure. - - =CROSS-HATCHES.=--In free-hand drawing the use of lines crossing each - other to produce light and shade effects. - - =CURVE.=--A line of which no part is straight. - - _Reversed Curve._--One whose curvature is first in one direction and - then in the opposite direction. - - _Spiral Curve._--A plain curve which winds about and recedes, - according to some law, from its point of beginning, which is called - its center. - - =CYLINDER.=--A solid bounded by a curved surface and by two opposite - faces called bases; the bases may be any curved figures and give the - name to the cylinder; thus a circular cylinder is one whose bases are - circles. - - =CYLINDRICAL.=--Having the general form of a cylinder. - - =DEGREE.=--The 360th part of a circle. - - =DESCRIBE.=--To make or draw a curved line; to draw a plan. - - =DESIGN.=--Any arrangement or combination to produce desired results - in industry or art. To delineate a form or figure by drawing the - outline--a sketch. - - =DEVELOP.=--To unroll or lay out. - - =DIAGONAL.=--A right line drawn from angle to angle of a quadrilateral - or many angled figure and dividing it into two parts. - - =DIAMETER.=--A right line passing through the center of a circle or - other round figure terminated by the curve and dividing the figure - symmetrically into two equal parts. - - =EDGE.=--The intersection of any two surfaces. - - =ELEVATION.=--The term elevation, vertical projection and _front - view_--applied to drawings--all have the same meaning. - - =FACE.=--One of the plane surfaces of a solid; it may be bounded by - straight or curved edges. - - =FINISHING.=--Completing a drawing whose lines have been determined by - erasing unnecessary lines and strengthening and accentuating where - this is needed. - - =FORESHORTENING.=--Apparent decrease in length, owing to objects being - viewed obliquely; thus a wheel, when seen obliquely, instead of - appearing round, presents the appearance of an ellipse. - - =FREE-HAND.=--Executed by the hand unaided by instruments. - - =GENERATED.=--Produced by. - - =GEOMETRIC.=--According to geometry. - - =HALF-TINT.=--The shading produced by means of parallel equidistant - lines. - - =HEMISPHERE.=--Half a sphere obtained by bisecting a sphere by a - plane. - - =HORIZONTAL.=--Parallel to the surface of smooth water. In drawing, a - line drawn parallel to the top and bottom of the sheet is called - horizontal. - - =INSCRIBE.=--See circumscribe--its opposite. - - =INSTRUMENTAL.=--By the use of instruments. - - =LINE.=--A line has length, only, as A C; a right line is a straight - line, the shortest line that can be drawn between two points, A----C. - - _Straight._ One which has the same direction throughout its entire - length. - - _Curved._ One no part of which is straight. - - _Broken._ One composed of different successive straight lines. - - _Mixed._ One of straight and curved lines. - - _Center._ A line used to indicate the center of an object. - - _Construction._ A working line used to obtain required lines. - - _Dotted._ A line composed of short dashes. - - - - - - - - _Dash._ A line composed of long dashes. -- -- -- - - _Dot_ and _Dash_. A line composed of dots and dashes alternating. -- · - -- · -- - - _Dimension._ A line upon which a dimension is placed. - - _Full._ An unbroken line, usually representing a visible edge. ------ - - _Shadow._ A line about twice as wide as the ordinary full line. - - A straight line is often called simply a line, and a curved line a - curve. - - =LONGITUDINAL.=--In the direction of the length of an object. - - =MODEL.=--A form used for study. - - =OBLIQUE.=--Neither horizontal nor vertical. - - =OBLONG.=--A rectangle with unequal sides. - - =OVAL.=--A plane figure resembling the longitudinal section of an egg; - or elliptical in shape. - - =OVERALL.=--The entire length. - - =PARALLEL.=--Having the same direction and everywhere equally distant. - - =PATTERN.=--That which is used as a guide or copy in making things. - - _Flat._ One made of paper or other thin material. - - _Solid._ One which reproduces the form and size of the object to be - made. - - =PERIMETER.=--The boundary of a closed plane figure. - - =PERPENDICULAR.=--At an angle of 90°. - - =PERSPECTIVE.=--View; drawing objects as they appear to the eye from - any given distance and situation, real or imaginary. - - =PLAN.=--Plan, horizontal projection and _top view_ have the same - meaning. - - =PLANE FIGURE.=--A part of a plane surface bounded by straight or - curved lines, or by both combined. - -[Illustration: Fig. 39.] - - =POLYGON.=--A plane figure bounded by straight lines called the sides - of the polygon. The least number of sides that can bound a polygon is - three. Polygons bounded by a greater number of sides than four are - denominated only by the number of sides. - - A polygon of five sides is called a _Pentagon_; of six, a _Hexagon_; - of seven, a _Heptagon_; of eight, an _Octagon_; of nine, a _Nonagon_, - etc. - - _Diagonals_ of a polygon are lines joining the vertices of angles not - adjacent. - - The _Perimeter_ of a polygon is its boundary considered as a whole. - - The _Base_ of a polygon is the side upon which the polygon is supposed - to stand. - - The _Altitude_ of a polygon is the perpendicular distance between the - base and a side or angle opposite the base. - -[Illustration: Fig. 40.] - - A _Quadrilateral_ is a polygon having four sides and four angles. - - A _Parallelogram_ is a quadrilateral which has its opposite sides - parallel. - - The side upon which a parallelogram stands and the opposite side are - called respectively its lower and upper bases. - - A _Rectangle_ is a parallelogram having its angles right angles. - - A _Square_ is an equilateral rectangle, fig. 41. - -[Illustration: Fig. 41.] - -[Illustration: Fig. 42.] - -[Illustration: Fig. 43.] - -[Illustration: Fig. 44.] - -[Illustration: Fig. 45.-49.] - - A _Rhomboid_ is an oblique-angled parallelogram. - - A _Rhombus_ is an equilateral rhomboid, fig. 42. - - A _Trapezium_ is a quadrilateral having no two sides parallel, fig. - 43. - - A _Trapezoid_ is a quadrilateral in which two opposite sides are - parallel, and the other two oblique, fig. 44. - - =A POLYHEDRON= is a solid bounded by planes. There are five regular - solids which are shown in figs. 45, 46, 47, 48 and 49. A regular solid - is bounded by similar and regular plane figures. - - Fig. 45.--The _tetrahedron_, bounded by four equilateral triangles. - - Fig. 46.--The _hexahedron_, or cube, bounded by six squares. - - Fig. 47.--The _octahedron_, bounded by eight equilateral triangles. - - Fig. 48.--The _dodecahedron_, bounded by twelve pentagons. - - Fig. 49.--The _icosahedron_, bounded by twenty equilateral triangles. - - =PRISM.=--A solid whose bases or ends are very similar plane figures, - and whose sides are parallelograms; prisms are called triangular, - square, etc., according as the bases are triangles, squares, etc. - - =PRODUCE.=--To continue or extend. - - =PROFILE.=--An outline or contour. - - =PROJECTION.=--The view of an object obtained upon a plane by - projecting lines perpendicular to the plane. - - =QUADRANT.=--The fourth part; a quarter; the quarter of a circle. - - =QUADRISECT.=--To divide into four equal parts. - - =SECTION.=--A projection upon a plane parallel to a cutting plane - which intersects any object. The section generally represents the part - behind the cutting plane, and represents the cut surfaces by diagonal - lines. - - =SECTIONAL.=--Showing the section made by a plane. - - =SHADOW.=--Shade and shadow have about the same meaning. - - =SOLID.=--A solid has three dimensions--length, breadth and thickness. - - =SPHERE.=--A solid bounded by a curved surface every point of which is - equally distant from a point within called the center. - - =SURFACE.=--The boundary of a solid. It has but two dimensions--length - and breadth. Surfaces are plane or curved. - - A _Plane Surface_ is one upon which a straight line can be drawn in - any direction. - - A _Curved Surface_ is one no part of which is plane. - - The surface of the sphere is curved in every direction, while the - curved surfaces of the cylinder and cone are straight in one - direction. - - The surface of a solid is no part of the solid, but is simply the - boundary of the solid. It has two dimensions only, and any number of - surfaces put together will give no thickness. - -[Illustration: Fig. 50.] - -[Illustration: Fig. 51.] - -[Illustration: Fig. 52.] - -[Illustration: Fig. 53.] - -[Illustration: Fig. 54.] - - =SYMMETRY.=--_Design._ A proper adjustment or adaptation of parts to - one another and to the whole. - - =TRISECT.=--To divide into three equal parts. - - =TRIANGLE.=--A triangle is a polygon having three sides and three - angles. _Tri_ is a Latin prefix signifying three; hence a Triangle is - literally a figure containing three angles. - - A _Scalene Triangle_ is one in which no two sides are equal. See fig. - 50. - - An _Isosceles Triangle_ is one in which two of the sides are equal. - See fig. 51. - - An _Equilateral Triangle_ is one in which the three sides are equal. - An _Equiangular Triangle_ is one having its three angles equal. An - _Acute-Angled Triangle_ is one in which each angle is acute. - - A _Right-Angled Triangle_ is one which has one of the angles a right - angle. See fig. 53. - - An _Obtuse-Angled Triangle_ is one having an obtuse angle. Fig. 54. - - Equiangular triangles are also equal sided, and vice versa. - - =VERTICAL.=--Upright or perpendicular. Vertical and perpendicular are - not synonymous terms. - - =VERTEX.=--See Angle, Quadrilateral, Triangle. The vertex of a solid - is the point in which its axis intersects the lateral surface. - - =VIEW.=--See Elevation. Views are called front, top, right or left - side, back, or bottom, according as they are made on the different - planes of projection. They are also sometimes named according to the - part of the object shown, as edge view, end view, or face view. - - =WORKING DRAWING.=--One which gives all the information necessary to - enable the workman to construct the object. - -[Illustration] - - -[Illustration: FREEHAND DRAWING] - -[Illustration: Fig. 55.] - - - - -Free-Hand Drawing. - - -A free-hand drawing is executed with the unaided hand and eye, without -guiding instruments or other artificial help. It is necessary to be -known that all drawing required cannot possibly be done by rule and -compass, but that some portions must be drawn “free-hand,” trusting to -the eye alone. - -Hence, it is important that the student should be able to sketch at -sight from objects he may see, or to draw roughly, with a piece of chalk -or a pencil, pieces of mechanism required to be represented. - -Practice in free-hand should go along with mechanical drawing as -progress is made, and thus cultivating both branches equally. - -“A simple sketch will often,” as has been rather roughly said, “express -more than yards of talk.” - -Even a slight sketch refreshes the memory, and in the case of the -preparation of a complete set of drawings, with a view to the making of -a thoroughly finished mechanical drawing, the proper course to pursue -is, to make a general sketch, letter the various parts for reference, -and then prepare a series of detailed sketches, similarly lettered, and -diffuse with dimensions. - -Everyone, whatever his specialty, feels to-day that the ability to -sketch rapidly and clearly is among the absolute necessities for correct -and prompt transactions of business, in giving and executing orders and -doing business with persons outside his profession. - -Mistakes and misunderstandings may be averted by means of rough sketches -taken at the time and shown for confirmation; this also saves assistants -from getting into trouble, especially if they pin the sketch to the -order, for reference, in case of the arising of any dispute. These are a -few of the advantages of knowing how to sketch quickly and correctly. - -In “free-hand” any sort of pencil is better than none, but there is a -considerable advantage in having a good serviceable article--a pencil -not too soft nor too hard, and one which will retain its point for some -little time. - -Fig. 55 shows the approved position in which the pencil should be held -while sketching. The pencil should be held firmly between the thumb and -first finger of the right hand; press the second finger against the -pencil at the opposite side to the thumb pressure, so that the pencil is -firmly held by the contact of the thumb and two fingers--the third and -fourth fingers just coming into easy reach of the paper surface--the -wrist or ball of the hand resting lightly on the surface of the -work--the arm resting on the desk or drawing-board for steadiness. - -The motion of the pencil is produced from the movement of the fingers -and thumb, principally in the vertical strokes, and the horizontal -strokes are produced by fingers and thumb, combined with a wrist or -elbow motion; the oblique lines and curves are produced with a free -movement, with nothing cramped or confined about the finger joints. - - -POSITION. - -It should be observed that nothing is more prejudicial to good execution -than the habit of leaning over the paper, which ought to be placed on a -surface sufficiently inclined to bring every portion equally under the -eye, thus obviating the necessity of leaning forward. All support to the -figure should be obtained by resting on the left arm, the right being -left free for work. By attention to these rules that awkwardness of -position, so detrimental to a good figure, will be avoided. It is better -to have the light on the left hand, as in this direction the shadow of -the pencil does not interfere with the view of the drawing. - -[Illustration: Fig. 56.] - - -HOW TO CUT A PENCIL. - -Hold the pencil firmly in the left hand, as in the drawing, allowing -about an inch to project beyond the fingers, and turn it gradually as -the knife removes the wood. The knife should be held so that the blade -alone projects beyond the fingers, and the part of it nearest the handle -used for cutting. The pencil should be placed against the inside of the -thumb of the right hand, as in the drawing (fig. 56), and the wood -removed by slight shaving. The lead should not be cut at the same time -as the wood, but rested on the thumb and pared gently afterwards; by -attention to these directions the pencil will be economized. - - -HOW TO DRAW STRAIGHT LINES. - -Before a line is drawn, the point at which it is to commence and the -point where it is to end, should be known; and let it be distinctly -understood that _this judgment of the eye_, and placing of points, -should invariably precede the drawing of every line. - -The first effort should, therefore, be to produce a line of points -exactly parallel with the upper edge of the paper, and at equal -distances from each other. Commence with point _A_ and place the point -_B_ carefully level with it, now place a slip of paper against these -points in the original, mark their distance apart, and see if the same -proportion has been given in your copy; if not, make the necessary -correction. Proceed with the next point, examine it, and so on to the -end of the line. When this is complete, examine each point in -succession, to try if it is at the same distance from the top of the -paper; when this is correct, proceed to draw the first level line. Hold -the pencil as in the drawing, fig. 57, keeping the elbow near the side; -join _A_ to _B_ by one light, steady stroke, produced by a movement of -the wrist, and add stroke upon stroke until the line is of the required -depth. Continue this process to the end of the line of points. Now place -the point _D_ at the right distance below the _A_, proceed with the -points for another line as before, and continue the lines until the -paper is covered. In producing the stroke the pencil should not be -jerked, or any stop be made between the points, but the movement should -be even throughout, and it is much better to produce each line by -several soft strokes, as _the repetition of delicate lines induces -lightness of touch and freedom of hand_; and it is also no small -advantage that lines thus produced are more easily removed by the India -rubber, should they require correction. - - -TO DRAW THE FIRST OBLIQUE LINE. - -Prepare three rows of points down the side of the paper, on the left -hand; examine them to see that they are at equal distances from the side -and from each other; hold the pencil as in the drawing, fig. 58, move -the elbow a little from the side, and join the points _A_ and _B_ with -one light line, produced by a movement of the fingers and thumb, -repeating the strokes until the line is of the requisite depth; proceed -to join _B_ to _C_, taking care previously to bring the hand a little -down the paper, as the line from _A_ to _C_ is too long to be produced -from one position. When the three rows of points are filled, make -another set, examine them and proceed as before. By these means the -paper will be covered with oblique lines, and if the points have been -placed exactly, the sheet will have a neat and regular appearance. - - NOTE.--The drawings of hands are introduced to show the positions for - holding the pencil, and are not intended for copying. - -[Illustration: Fig. 57.] - -[Illustration: Fig. 58.] - -It is a common, and at the same time highly injurious habit, to draw -this line by a movement of the wrist, the fingers remaining rigid. This -may be detected by watching the action of the thumb; if it bends as the -line is produced, all is right; but if it does not the wrist is at work. - - -TO DRAW THE UPRIGHT OR PERPENDICULAR LINE. - -This line demands the greatest attention, and any care bestowed upon it -will be amply repaid in the after studies. - -Commence by placing a line of points down the side of the paper, examine -them very carefully to see that they are all the same distance from its -edge, hold the pencil as in the drawing, fig. 59, move the elbow well -out from the side, and join the points by a movement of the fingers and -thumb. When one line is complete, place the points for the next, and -examine them from the edge of the paper, not from the line just drawn. -Proceed in this manner until the paper is covered. - -There is in most cases a tendency to place the points for this line in a -slightly inclined direction, as in writing, though in some instances the -tendency is the opposite, a thoroughly correct eye in this respect being -a rare gift: and it may be useful to suggest that the paper be so placed -that the line of points to be produced may be exactly in front of the -eye. - - -TO DRAW THE SECOND OBLIQUE LINE. - -Prepare three rows of points down the side of the paper, examine them -for correctness of position, hold the pencil as in the drawing, fig. 60, -remove the elbow as far as possible from the side, and join the points -by a movement of the fingers and thumb, and continue the exercise until -the paper is covered. - -[Illustration: Fig. 59.] - -[Illustration: Fig. 60.] - -It will be noticed that each change in direction of the line to be -drawn, has been accompanied with a corresponding change in the position -of the elbow and wrist. The following simple rule will assist the memory -when placing the hand for any given line; the pencil should be held so -that it may form a T with the line to be drawn: - -[Illustration] - -For the horizontal line, elbow near the side. - -[Illustration] - -For the first oblique, elbow a little removed. - -[Illustration] - -For the perpendicular, elbow more removed. - -[Illustration] - -For the second oblique, elbow most removed. - -[Illustration: Finger and thumb lines. - -Wrist lines. - -Finger and thumb lines. - -Wrist lines.] - -It may also be interesting to notice, with regard to the movements by -which lines are produced, that they are divided into two systems; the -first is that of the wrist, which includes the horizontal, and lines in -nearly the same direction; the second is that of the fingers and thumb, -by which all other lines are formed. The following diagram exhibits the -two systems and their various lines grouped, and it will be observed -that there is a space marked (a) between the two sets, which may be -considered neutral ground. Lines in this direction may be produced by -either movement, as may be most convenient, but it will always be found -that these lines are the most trying to the hand. - - -ON FIGURES FORMED OF STRAIGHT LINES. - -Before commencing this subject, let it be clearly understood that future -success will, in a great measure, depend upon the amount of care -bestowed upon it. The aim should be to obtain absolute accuracy, and for -this end the copies should be tested by the most careful measurements, -and corrected until they are true with the originals, but it should be -distinctly understood that these measurements are only to be made after -the eye and hand have done their best. - - NOTE.--To some it may appear that too much time and care has been - bestowed on mere lines, but let it be understood that a good system of - line drawing is the basis of all education--the slightest outline by a - hand thus trained has a bold, free and masterly character; and with - regard to shading, which is simply an aggregation of good lines, it is - only by such a practiced hand its most charming effects can be - produced. - -Fig. 66: Place the points _A_, _B_. Examine them to see that they are -the same distance apart as in the original, and that they are level; -place the point _C_ exactly under _A_, and make _A C_ equal in distance -to _A B_; now place the point _D_ opposite _C_ and under _B_; try the -distances between each point to see that they are the same; divide each -side by a point half way, and then draw the lines. - -Fig. 67: Repeat the last figure and add the lines _A_ and _B_, taking -great care that the points for them are correctly placed. - -Fig. 68: Commence with the square as before; then join the half-way -points. - -Fig. 69: After the square is drawn, place the points _A_ and _B_ at the -right height above the half-way points, and _C_, _D_ at the proper -distance from the corners, then draw the figure. - -Fig. 70: The greatest care should be taken with the squares for this and -the following figure, as the slightest error in them will destroy the -symmetry of the drawing within; when the square is completed, join the -opposite corners, and place on the crossed lines the points _B_, _C_, -_D_, _E_; examine these to see that they are each at the same distance -from the centre _A_, and that this distance is equal to the space from -_A_ to the sides of the square; when all are proved to be correct, -complete the figure. - -[Illustration: Fig. 66.] - -[Illustration: Fig. 67.] - -[Illustration: Fig. 68.] - -[Illustration: Fig. 69.] - -[Illustration: Fig. 70.] - -[Illustration: Fig. 71.] - -Fig. 71: Repeat the last drawing with, if possible, greater exactness, -and outside the octagon place the points _A_, _B_, _C_, _D_, etc.; -examine each of these points to see that they are all at the same -distance from the centre, and then complete the figure. - - -ON CURVED LINES. - -The right position of the hand for drawing any curved line is that -required for a straight line which would touch the extremities of the -curve. The straight lines given in the exercises are valuable, not only -as a guide to the position of the hand, but as an assistance to the eye -when forming the curves or examining them after they are produced. - -[Illustration] - -The direction given for drawing a straight line was to form it by one -steady movement from point to point, without any jerk or stop by the -way. This instruction requires to be changed for the curve, _which is -better produced by several short strokes_, thus: - -[Illustration] - -or by overlapping lines, any outside bits being cleared away with India -rubber. - -These exercises will test the drawing power and try the patience of the -pupil, but they are worthy of all the care which can be bestowed, which -in future efforts will meet with its full reward. - -Fig. 76: Draw first the square as directed in the previous lesson, join -the points _A_, _B_, _C_ and add the short lines at _E_ and _F_, proceed -with the curve _A B_, drawing it with faint lines at first, and adding -stroke upon stroke until the required depth is obtained; the curve _A C_ -is more difficult to produce, in consequence of the formation of the -hand; it should, therefore, be drawn in shorter pieces, joining them -together afterwards by over strokes. - -[Illustration: Fig. 76.] - -[Illustration: Fig. 77.] - -Fig. 77: Draw the square and straight lines first, then add the curves, -taking care to give the greatest fullness at the right place. - -Fig. 78: Draw the square and straight lines, proceed with the curves, -taking care to make each of the same proportion. - -Figs. 79 and 80: The ovals contained in these figures are simply -foreshortened circles, and as such forms are of frequent occurrence in -sketching from objects, in bridges, wheels, ends of timber, etc., they -should be carefully studied; the greatest difficulty is to turn the -narrow ends, and prevent their looking like corners. For this purpose it -is better to draw the short curves first, thus: - -[Illustration] - -and then join the longer sides to them. - -Fig. 81: If this figure can be drawn correctly, a great success has been -achieved; the circle is a most difficult form to delineate, and without -system could not be accomplished. Draw the square and straight lines -within it with great care, examine each point of the octagon to see that -it is at the same distance from the centre, and then draw the circle. - - -EXAMPLES FOR PRACTICE. - -Several figures, 83 to 96, representing more or less familiar parts of -machines, utilities, etc., are introduced for practice in free-hand, -but-- - -It must be noted that even in free-hand the wise student will -occasionally use the straight edge and compasses, so as to make his -first attempts fairly creditable. Many good draughtsmen have begun by -simply copying such figures and illustrations as are used throughout -this volume and other similar sources; perhaps there is nothing better -for practice or training than the copying and reproducing of samples of -good mechanical drawings, yet it must always be remembered that -advancement in free-hand must be made in the line of less to greater -efforts, and that the why and wherefore will be constantly asked by the -aspiring student; that good and correct drawings are to be aimed for at -all times in every line and dimension--never forgetting the law of -proportion in the smallest outlines of objects to be represented. - -[Illustration: Fig. 78.] - -[Illustration: Fig. 79.] - -[Illustration: Fig. 80.] - -[Illustration: Fig. 81.] - -Fig. 83 is a section, or end view of a bar of angle iron; the student -will find helpful practice in attempting this figure; he may be allowed -to use a straight-edge in drawing the lines, but no measurements; the -work should be tested on completion by a rule, or better by penciling -from the original on tracing paper, and comparing the free-hand with the -copy, when the defective proportions, if any, will be clearly exhibited. - -Fig. 84 is a section of tee iron, and fig. 85 is a section of channel -iron. These three figures on page 75 should be practiced alternately, -although seeming similar in shape. - -Fig. 86 is a side and end view of an angle plate shaded. Fig. 87 is a -wrench shaded. - -Examples of bolt ends are shown in the two next numbers; fig. 88 -exhibits the common square-head bolt, and fig. 89 the hexagon or -six-sided bolt-head; these are also examples of _straight-line shading_. -Fig. 90 is a lathe-dog, and shows an example of _curved shading_; fig. -92 is an engine crank, and an example of _straight and curved shading_; -fig. 91 is a screw clamp. - -Fig. 93 is a section of boiler plates riveted together; a caulking tool -is also shown. - -In the example, fig. 94--a hand-wheel--the principal difficulty, even -for the most advanced student in free-hand, will be in drawing the -circles; a coin, if convenient, can be used to scribe about, in drawing -these; the other parts can afterwards be filled in around the circle. -Fig. 96 is introduced for practice in penciling and shading; the figure -represents a water-wheel on a stone pier. - -The familiar oil can is shown in fig. 95. These all are excellent -objects for practice. - -[Illustration: Fig. 83.--Fig. 84.--Fig. 85.] - -[Illustration: Fig. 86.] - -[Illustration: Fig. 87.] - -[Illustration: Fig. 88.--Fig. 89.--Fig. 90.--Fig. 91.] - -[Illustration: Fig. 92.] - -[Illustration: Fig. 93.] - -[Illustration: Fig. 94.] - -[Illustration: Fig. 95.] - -[Illustration: Fig. 96.] - - -[Illustration: GEOMETRICAL DRAWING] - -[Illustration] - - - - -Geometrical Drawing. - - -Geometry is the science of measurement; it has been known for more than -three thousand years; many lives have been devoted to its development, -and it exists to-day as the foundation of all mathematics. - -Geometrical drawing is the art of representing, to the eye, the problems -“worked out” by geometricians, and the importance of a knowledge of -geometrical drawing is paramount. The student will find that the figures -delineated and explained in the next few pages constantly occur in -mechanical drawing. Says Walter Smith, State Director of Art Education -in Massachusetts, “I have never known a case where a student did not -progress more satisfactorily in his studies after a course of practical -geometry.” - -The elementary conceptions of geometry are few: - - 1.--A point. - 2.--A line. - 3.--A surface. - 4.--A solid, and - 5.--An angle. - -All of which elements are used in mechanical drawings. - -From these, as data, a vast number of mathematical problems have been -deduced; of which a few of the most elementary will be illustrated in -this work; but these few will repay the attention of the student. - -In “freehand” drawing the crayon and pencil are used; in geometrical -drawings the dividers, as shown in illustration, fig. 97, together with -a rule, are all that is necessary to accomplish the work. - -A problem is something to be done, and geometry has been defined as the -science of measurement; the relation between geometry and mechanical -drawing is very close, hence the term “geometrical problem.” - -[Illustration: Fig. 97.] - -[Illustration: Fig. 98.] - -Before proceeding with the examples, a few elementary statements -belonging to the science of geometry are presented; these will be useful -to the student, not only while “doing” the problems, but in many cases -of every-day--future--experience. - -Geometry is one of the oldest and simplest of sciences; it may be -defined as _the science of measurement_; geometry is _the root_ from -which all regular mathematical calculations issue. It has claimed the -best thought of practical men from the times of the Greeks and Romans -two thousand years ago; they derived their knowledge of the science from -the Egyptians, who in turn were indebted to the Chaldeans and Hindoos in -times beyond any authentic history; hence it was under the operations of -the laws explained in geometry, that the pyramids of Egypt and the -temples of Greece were constructed, as well as the engines of war and -appliances of peace of ancient times. - -_A point_ is mere position, and has no magnitude. - -_A line_ is that which has extension in length only. The extremities of -lines are points. - -_A surface_ is that which has extension in length and breadth only. - -_A solid_ is that which has extension in length, breadth and thickness. - -_An angle_ is the difference in the direction of two lines proceeding -from the same point. - -[Illustration] - -Lines, Surfaces, Angles and Solids constitute the different kinds of -quantity called _geometrical_ magnitudes. - -_Parallel lines_ are lines which have the same direction; hence parallel -lines can never meet, however far they may be produced; for two lines -taking the same direction cannot approach or recede from each other. - -[Illustration] - -An _Axiom_ is a self-evident truth, not only too simple to require, _but -too simple to admit of demonstration_. - -A _Proposition_ is something which is either proposed to be done, or to -be demonstrated, and is either a problem or a theorem. - -A _Problem_ is something proposed to be done. - -A _Theorem_ is something proposed to be demonstrated. - -A _Hypothesis_ is a supposition made with a view to draw from it some -consequence which establishes the truth or falsehood of a proposition, -or solves a problem. - -A _Lemma_ is something which is premised, or demonstrated, in order to -render what follows more easy. - -A _Corollary_ is a consequent truth derived immediately from some -preceding truth or demonstration. - -A _Scholium_ is a remark or observation made upon something going before -it. - -A _Postulate_ is a problem, the solution of which is self-evident. - -Let it be granted-- - -I. That a straight line can be drawn from any one point to any other -point; - -II. That a straight line can be produced to any distance, or terminated -at any point; - -III. That the circumference of a circle can be described about any -center, at any distance from that center. - -The common algebraic signs are used in Geometry, and it is necessary -that the student in geometry should understand some of the more simple -operations of algebra. As the terms circle, angle, triangle, hypothesis, -axiom, theorem, corollary and definition are constantly occurring in a -course of geometry, they are abbreviated as shown in the following list: - - Addition is expressed by + - Subtraction is expressed by - - Multiplication is expressed by × - Equality and Equivalency are expressed by = - Greater than, is expressed by > - Less than, is expressed by < - Thus _B_ is greater than _A_, is written _B_ > _A_ - _B_ is less than _A_, is written _B_ < _A_ - A circle is expressed by O - An angle is expressed by L - A right angle is expressed by R. L - Degrees, minutes and seconds are expressed by ° ′ ″ - A triangle is expressed by △ - The term Hypothesis is expressed by (Hy.) - The term Axiom is expressed by (Ax.) - The term Theorem is expressed by (Th.) - The term Corollary is expressed by (Cor.) - The term Definition is expressed by (Def.) - The term Perpendicular is expressed by ⊥ - The difference of two quantities, when it is not - known which is the greater, is expressed by - the symbol ~ - Thus, the difference between _A_ and _B_ is written _A_ ~ _B_ - - -GEOMETRICAL AXIOMS. - -1. _Things which are equal to the same thing are equal to each other._ - -2. _When equals are added to equals the wholes are equal._ - -3. _When equals are taken from equals the remainders are equal._ - -4. _When equals are added to unequals the wholes are unequal._ - -5. _When equals are taken from unequals the remainders are unequal._ - -6. _Things which are double of the same thing, or equal things, are -equal to each other._ - -7. _Things which are halves of the same thing, or of equal things, are -equal to each other._ - -8. _The whole is greater than any of its parts._ - -9. _Every whole is equal to all its parts taken together._ - -10. _Things which coincide, or fill the same space, are identical, or -mutually equal in all their parts._ - -11. _All right angles are equal to one another._ - -12. _A straight line is the shortest distance between two points._ - -13. _Two straight lines cannot enclose a space._ - - -Problems in Geometrical Drawing. - -[Illustration: Fig. 99.] - -EXAMPLE 1.--_To bisect_ (cut in two) _a straight line or an arc of a -circle_, Fig. 99. From the ends of _A B_ as centers, describe arcs -cutting each other at _C_ and _D_, and draw _C D_, which cuts the line -at _E_ or the arc at _F_. - -EX. 2.--_To draw a perpendicular to a straight line, or a radial line to -a circular arc_, Fig. 99. Operate as in the foregoing problem. The line -_C D_ is perpendicular to _A B_; the line _C D_ is also radial to the -arc _A B_. - -[Illustration: Fig. 100.] - -[Illustration: Fig. 101.] - -EX. 3.--_To draw a perpendicular to a straight line, from a given point -in that line_, Fig. 100. With any radius from any given point _A_ in the -line _B C_, cut the line at _B_ and _C_. Next, with a longer radius, -describe arcs from _B_ and _C_, cutting each other at _D_, and draw the -perpendicular _D A_. - -_Second Method_, Fig. 101. From any center _F_ above _B C_, describe a -circle passing through the given point _A_, and cutting the given line -at _D_; draw _D F_, and produce it to cut the circle at _E_; and draw -the perpendicular _A E_. - -[Illustration: Fig. 102.] - -_Third Method_, Fig. 102. From _A_ describe an arc _E C_, and from _E_, -with the same radius, the arc _A C_ cutting the other at _C_; through -_C_ draw a line _E C D_ and set off _C D_ equal to _C E_, and through -_D_ draw the perpendicular _A D_. - -[Illustration: Fig. 103.] - -[Illustration: Fig. 104.] - -EX. 4.--_To draw a perpendicular to a straight line from any point -without it_, Fig. 103. From the point _A_ with a sufficient radius cut -the given line at _F_ and _G_; and from these points describe arcs -cutting at _E_. Draw the perpendicular _A E_. - -If there be no room below the line, the intersection may be taken above -the line; that is to say, between the line and the given point. - -_Second Method_, Fig. 104. From any two points _B C_ at some distance -apart, in the given line, and with the radii _B A_, _C A_, respectively, -describe arcs cutting at _A D_. Draw the perpendicular _A D_. - -[Illustration: Fig. 105.] - -[Illustration: Fig. 106.] - -EX. 5.--_To draw a parallel line through a given point_, Fig. 105. With -a radius equal to the given point _C_ from the given line _A B_, -describe the arc _D_ from _B_, taken considerably distant from _C_. Draw -the parallel through _C_ to touch the arc _D_. - -_Second Method_, Fig. 106. From _A_, the given point, describe the arc -_F D_, cutting the given line at _F_; from _F_, with the same radius, -describe the arc _E A_, and set off _F D_, equal to _E A_. Draw the -parallel through the points _A D_. - -[Illustration: Fig. 107.] - -When a series of parallels are required perpendicular to a base line _A -B_, they may be drawn as in fig. 107 through points in the base line set -off at the required distances apart. This method is convenient also -where a succession of parallels are required to a given line _C D_, for -the perpendicular may be drawn to it, and any number of parallels may be -drawn on the perpendicular. - -[Illustration: Fig. 108.] - -[Illustration: Fig. 109.] - -EX. 6.--_To divide a line into a number of equal parts_, Fig. 108. - -To divide the line _A B_ into, say, five parts. From _A_ and _B_ draw -parallels _A C_, _B D_ on opposite sides; set off any convenient -distance four times (one less than the given number), from _A_ on _A C_, -and on _B_ on _B D_; join the first on _A C_ to the fourth on _B D_, and -so on. The lines so drawn divide _A B_ as required. - -_Second Method_, Fig. 109. Draw the line at _A C_, at an angle from _A_, -set off, say, five equal parts; draw _B_ 5, and draw parallels to it -from the other points of division in _A C_. These parallels divide _A B_ -as required. - -[Illustration: Fig. 110.] - -EX. 7.--_Upon a straight line to draw an angle equal to a given angle_, -Fig. 110. Let _A_ be the given angle and _F G_ the line. With any radius -from the points _A_ and _F_, describe arcs _D E_, _I H_, cutting the -sides of the angle _A_ and the line _F G_. - -Set off the arc _I H_, equal to _D E_ and draw _F H_. The angle _F_ is -equal to _A_ as required. - -[Illustration: Fig. 111.] - -EX. 8.--_To bisect an angle_, Fig. 111. Let _A C B_ be the angle; on the -center _C_ cut the sides at _A B_. On _A_ and _B_ as centers describe -arcs cutting at _D_ dividing the angle into two equal parts. - -[Illustration: Fig. 112.] - -EX. 9.--_To find the center of a circle or of an arc of a circle._ Fig. -112. Draw the chord _A B_, bisect it by the perpendicular _C D_, bounded -both ways by the circle; and bisect _C D_ for the center _G_. - -[Illustration: Fig. 113.] - -[Illustration: Fig. 114.] - -EX. 10.--_Through two given points to describe an arc of a circle with a -given radius_, Fig. 113. On the points _A_ and _B_ as centers, with the -given radius, describe arcs cutting at _C_; and from _C_, with the same -radius, describe an arc _A B_ as required. - -Second, for a circle or an arc, Fig. 114. Select three points _A_, _B_, -_C_ in the circumference, well apart; with the same radius describe arcs -from these three points cutting each other, and draw two lines _D E_, _F -G_, through their intersections according to Fig. 107. The point where -they cut is the center of the circle or arc. - -EX. 11.--_To describe a circle passing through three given points_, Fig. -114. Let _A_, _B_, _C_ be the given points and proceed as in last -problem to find the center _O_, from which the circle may be described. - -This problem is variously useful; in finding the diameter of a large -fly-wheel, or any other object of large diameter when only a part of the -circumference is accessible; in striking out arches when the span and -rise are given, etc. - -[Illustration: Fig. 115.] - -EX. 12.--_To draw a tangent to a circle from a given point in the -circumference_, Fig. 115. From _A_ set off equal segments _A B_, _A D_, -join _B D_ and draw _A E_, parallel to it, for the tangent. - -[Illustration: Fig. 116.] - -EX. 13.--_To draw tangents to a circle from points without it_, Fig. -116. From _A_ with the radius _A C_ describe an arc _B C D_, and from -_C_ with a radius equal to the diameter of the circle, cut the arc at _B -D_, join _B C_, _C D_, cutting the circle at _E F_, and draw _A E_, _A -F_, the tangents. - -[Illustration: Fig. 117.] - -EX. 14.--_Between two inclined lines to draw a series of circles -touching these lines and touching each other_, Fig. 117. Bisect the -inclination of the given lines _A B_, _C D_ by the line _N O_. From a -point _P_ in this line draw the perpendicular _P B_ to the line _A B_, -and on _P_ describe the circle _B D_, touching the lines and cutting the -center lines at _E_. From _E_ draw _E F_ perpendicular to the center -line, cutting _A B_ at _F_, and from _F_ describe an arc _E G_, cutting -_A B_ at _G_. Draw _G H_ parallel to _B P_, giving _H_, the center of -the next circle, to be described with the radius _H E_, and so on for -the next circle, _I N_. - -[Illustration: Fig. 118.] - -[Illustration: Fig. 119.] - -EX. 15.--_To construct a triangle on a given base, the sides being -given._ - -First. An equilateral triangle, Fig. 118. On the ends of a given base _A -B_, with _A B_ as a radius describe arcs cutting at _C_, and draw _A C_, -_C B_. - -Second. Triangle of unequal sides, Fig. 119. On either end of the base -_A D_, with the side _B_ as a radius describe an arc; and with the side -_C_ as a radius, on the other end of the base as a center, describe arcs -cutting the arc at _E_; join _A E_, _D E_. - -This construction may be used for finding the position of a point _C_ or -_E_ at given distances from the ends of a base, not necessarily to form -a triangle. - -[Illustration: Fig. 120.] - -[Illustration: Fig. 121.] - -EX. 16.--_To construct a square rectangle on a given straight line._ - -First. A square, Fig. 120. On the ends _B A_ as centers, with the line -_A B_ as radius, describe arcs cutting at _C_; on _C_ describe arcs -cutting the others at _D E_; and on _D_ and _E_ cut these at _F G_. Draw -_A F_, _B G_ and join the intersections _H I_. - -Second. A rectangle, Fig. 121. On the base _E F_ draw the perpendiculars -_E H_, _F G_, equal to the height of the rectangle, and join _G H_. - -[Illustration: Fig. 122.] - -EX. 17.--_To construct a parallelogram of which the sides and one of the -angles are given_, Fig. 122. Draw the side _D E_ equal to the given -length _A_, and set off the other side _D F_ equal to the other length -_B_, forming the given angle _C_. From _E_ with _D F_ as radius, -describe an arc, and from _F_, with the radius _D E_ cut the arc at _G_. -Draw _F G_, _E G_. Or, the remaining sides may be drawn as parallels to -_D E_, _D F_. - -[Illustration: Fig. 123.] - -EX. 18.--_To describe a circle about a triangle_, Fig. 123. Bisect two -sides _A B_, _A C_ of the triangle at _E F_, and from these points draw -perpendiculars cutting at _K_. On the center _K_, with the radius _K A_ -draw the circle _A B C_. - -[Illustration: Fig. 124.] - -EX. 19.--_To describe a circle about a square, and to inscribe a square -in a circle_, Fig. 124. - -First. To describe the circle. Draw the diagonals _A B_, _C D_ of the -square, cutting at _E_; on the center _E_ with the radius _E A_ describe -the circle. - -Second. To inscribe the square. Draw the two diameters _A B_, _C D_ at -right angles and join the points _A B_, _C D_ to form the square. - -_In the same way a circle may be described about a triangle._ - -[Illustration: Fig. 125.] - -EX. 20.--_To inscribe a circle on a square, and to describe a square -about a circle_, Fig. 125. - -First. To inscribe the circle. Draw the diagonals _A B_, _C D_ of the -square, cutting at _E_; draw the perpendicular _E F_ to one side, and -with the radius _E F_ describe the circle. - -Second. To describe the square. Draw two diameters _A B_, _C D_ at right -angles, and produce them; bisect the angle _D E B_ at the center by the -diameter _F G_, and through _F_ and _G_ draw perpendiculars _A C_, _B -D_, and join the points _A D_ and _B C_ where they cut the diagonals to -complete the square. - -[Illustration: Fig. 126.] - -EX. 21.--_To inscribe a circle in a triangle_, Fig. 126. Bisect two of -the angles _A C_ of the triangle by lines cutting at _D_; from _D_ draw -a perpendicular _D E_ to any side, and with _D E_ as radius describe a -circle. - -[Illustration: Fig. 127.] - -EX. 22.--_To inscribe a pentagon in a circle_, Fig. 127. Draw two -diameters _A C_, _B D_ at right angles cutting at _O_; bisect _A O_ at -_E_, and from _B_ with radius _B E_ cut the circumference at _G H_ and -with the same radius step round the circle to _I_ and _K_; join the -points to form the pentagon. - -[Illustration: Fig. 128.] - -EX. 23.--_To construct a hexagon upon a given straight line_, Fig. 128. -From _A_ and _B_, the ends of the given line, describe arcs cutting at -_G_; from _G_ with the radius _G A_ describe a circle. With the same -radius set off the arcs _A C_, _C F_ and _B D_, _D E_; join the points -so found to form the hexagon. - -[Illustration: Fig. 129.] - -EX. 24.--_To inscribe a hexagon in a circle_, Fig. 129. Draw a diameter -_A C B_; from _A_ and _B_ as centers, with the radius of the circle _A -C_ cut the circumference at _D_, _E_, _F_, _G_, and draw _A D_, _D E_, -etc., to form the hexagon. The points _D E_, etc., may be found by -stepping the radius (with the dividers) six times round the circle. - -[Illustration: Fig. 130.] - -EX. 25.--_To describe an octagon on a given straight line_, Fig. 130. -Produce the given line _A B_ both ways and draw perpendiculars _A E_, _B -F_; bisect the external angles _A_ and _B_ by the lines _A H_, _B C_, -which make equal to _A B_. Draw _C D_ and _H G_ parallel to _A E_ and -equal to _A B_; from the center _G D_, with the radius _A B_, cut the -perpendiculars at _E F_, and draw _E F_ to complete the hexagon. - -[Illustration: Fig. 131.] - -EX. 26.--_To convert a square into an octagon_, Fig. 131.--Draw the -diagonals of the square cutting at _E_; from the corners _A_, _B_, _C_, -_D_, with _A E_ as radius, describe arcs cutting the sides at _G_, _H_, -etc., and join the points so found to complete the octagon. - -[Illustration: Fig. 132.] - -EX. 27.--_To inscribe an octagon in a circle_, Fig. 132. Draw two -diameters _A C_, _B D_, at right angles; bisect the arcs _A B_, _B C_, -at _E_, _F_, etc., to form the octagon. - -[Illustration: Fig. 133.] - -EX. 28.--_To describe an octagon about a circle_, Fig. 133. Describe a -square about the given circle _A B_, draw perpendiculars _H_ and _K_, to -the diagonals, touching the circle to form the octagon. Or, the points -_H_, _K_, etc., may be found by cutting the sides from the corners, by -lines parallel to the diagonals. - -[Illustration: Fig. 134.] - -EX. 29.--_To describe an ellipse when the length and breadth are given_, -Fig. 134. On the center _C_, with _A E_ as radius, cut the axis _A B_ at -_F_ and _G_, the foci, fix a couple of pins into the axis at _F_ and -_G_, and loop on a thread or cord upon them equal in length to the axis -_A B_, so as when stretched to reach the extremity _C_ of the conjugate -axis, as shown in dot-lining. Place a pencil or drawpoint inside the -cord, as at _H_, and guiding the pencil in this way, keeping the cord -equally in tension, carry the pencil round the pins _F_, _G_, and so -describe the ellipse. - - NOTE.--The ellipse is an oval figure, like a circle in perspective. - The line that divides it equally in the direction of its great length - is the _transverse axis_, and the line which divides the opposite way - is the _conjugate axis_. - -_Second Method._ Along the straight edge of a piece of stiff paper mark -off a distance _a c_ equal to _A C_, half the transverse axis; and from -the same point a distance _a b_ equal to _C D_, half the conjugate axis. -Place the slip so as to bring the point _b_ on the line _A B_ of the -transverse axis, and the point _c_ on the line _D E_; and set off on the -drawing the position of the point _a_. Shifting the slip, so that the -point travels on the transverse axis, and the point _c_ on the conjugate -axis, any number of points in the curve may be found, through which the -curve may be traced. See fig. 135. - -[Illustration: Fig. 135.] - - -Trigonometry. - -Trigonometry is that portion of geometry which has for its object the -measurement of triangles. When it treats of plane triangles, it is -called _Plane Trigonometry_; and as the engineer will continually meet -in his studies of higher mathematics _the terms_ used in plane -trigonometry, it is advantageous for him to become familiar with some of -the principles and definitions relating to this branch of mathematics. - -The circumferences of all circles contain the same number of degrees, -but the greater the radius the greater is the absolute measures of a -degree. The circumference of a fly wheel or the circumference of the -earth have the same number of degrees; yet the same number of degrees in -each and every circumference is the measure of precisely the same angle. - -The circumference of a circle is supposed to be divided into 360 degrees -or divisions, and as the total angularity about the center is equal to -four right angles, each right angle contains 90 degrees, or 90°, and -half a right angle contains 45°. Each degree is divided into 60 minutes, -or 60′; and for the sake of still further minuteness of measurement, -each minute is divided into 60″. In a whole circle there are, therefore, -360 × 60 × 60 = 1,296,000 seconds. The annexed diagram, fig. 136, -exemplifies the relative positions of the - - Sine, - Co-sine, - Versed Sine, - - Tangent, - Co-Tangent, - Secant and - Co-secant - -of an angle. - -[Illustration: Fig. 136.] - -These may be defined thus: - - -DEFINITIONS. - -1. The _Complement_ of an arc is 90° minus the arc. - -2. The _Supplement_ of an arc is 180° minus the arc. - -3. The _Sine_ of an angle, or of an arc, is a line drawn from one end of -an arc, perpendicular to a diameter drawn through the other end. - -4. The _Cosine_ of an arc is the perpendicular distance from the center -of the circle to the sine of the arc; or, it is the same in magnitude as -the sine of the complement of the arc. - -5. The _Tangent_ of an arc is a line touching the circle in one -extremity of the arc, and continued from thence, to meet a line drawn -through the center and the other extremity. - -6. The _Cotangent_ of an arc is the tangent of the complement of the -arc. The _Co_ is but a contraction of the word complement. - -7. The _Secant_ of an arc is a line drawn from the center of the circle -to the extremity of the tangent. - -8. The _Cosecant_ of an arc is the secant of the complement. - -9. The _Versed Sine_ of an arc is the distance from the extremity of the -arc to the foot of the sine. - -For the sake of brevity, these technical terms are contracted thus: for -sine _A B_, we write _sin. A B_; for cosine _A B_, we write _cos. A B_; -for tangent _A B_, we write _tan. A B_, etc. - - -[Illustration: INSTRUMENTS AND MATERIALS] - -[Illustration: Fig. 137.] - - - - -Drawing Materials and Instruments. - - -Drawing tools or instruments are contrived solely for mechanical -drawing; aside from this use they are perfectly worthless, hence the -quality of these special utensils is a matter of the first consideration -to the earnest student. - -There are several degrees of excellence to be found in the make-up of -drawing instruments and materials; it may be remarked with truth that -“any kind are good enough, and the best none too good,” i. e., a learner -in this delightful art should not stop at the lack of goodness or the -low grade existing in his “tools,” but rather do the best work possible -with the means at hand. - -However, in order that acceptable work may be accomplished, fairly good -instruments should be procured. The advice of some one experienced in -the use and care of draughting tools should be sought before purchasing. -A drawing board, a single sheet of paper and a pencil is the simplest -“outfit” to be thought of; to this small beginning may be added, soon -afterwards, an inexpensive pair of compasses, a T-square and a couple of -triangles; a vast range of work can be executed with these few tools. - -Nothing else will be needed to do fine work except, perhaps, one or two -pairs of better compasses and a few sweeps or means of drawing irregular -curves; all these had best be purchased separately; for in buying a “box -of instruments,” it may contain some articles which are not desired, or -that are of a wrong size, or even duplicates of those already possessed. - -[Illustration: Fig. 138.] - -An outfit recommended by the author of “Reed’s Hand Book” is as follows. - -Large compasses with movable leg. - -A pair of dividers. - -Bow pencil. - -Bow pen. - -Pencil leg for large compasses. - -Pen leg for large compasses. - -Drawing pen. - -Louis Rouillon, B. S., Instructor of Drawing in Pratt Institute, New -York, recommends the following: - -Compasses, 5¹⁄₂ inches, with needle point; pen pencil and lengthening -bar. - -Drawing pen, 4¹⁄₂ inches. - -T-square, 24-inch blade. - -45-degree triangle, 9 inches. - -30 and 60 degree triangle, 9 inches. - -1 Scroll. - -Dixon’s V. H. pencil. - -12-inch boxwood scale, flat, graduated ¹⁄₁₆ inch the entire length. - -Bottle of liquid India ink, four thumb-tacks, pen and ink eraser. - -20 sheets drawing paper, 11 × 15 inches, and a drawing-board about 16 × -23 inches will also be necessary; students can usually make the board -themselves for less money than it can be bought. - - NOTE.--The purchasing of drawing tools is one of the most difficult - points to settle that can present itself to a person about to buy a - drawing outfit for the first time. Nothing can be so productive of - distress to a person drawing as to have his tools getting out of - order, joints one day too tight, next day too slack, points getting - blunt or perhaps turning up altogether; if needle points, then the - needles slip up, and drawing spoiled; in fact, the purchaser can be - annoyed in numberless different ways.--W. H. THORN. - -[Illustration: Fig. 139.] - -[Illustration: Fig. 140.] - - -THE DRAWING BOARD. - -A drawing-board should be made of well seasoned pine of a convenient -size, say 23 × 16, which will take half a sheet of imperial paper, -leaving ¹⁄₂-inch margin all around. - -The working surface of the board--or its front side--should be perfectly -smooth, but instead of being flat it should have a very slight camber, -or rounding, breadthways, this latter feature in its construction being -to prevent the possibility of a sheet of paper when stretched on its -surface having any vacuity beneath it. - -The _four edges_ of the board need not form an exact rectangle, as much -valuable time is often wasted in the attempts to produce such a board; -but it will answer every purpose of the draughtsman so long as the -adjacent edges at the lower left-hand corner of it are at right angles, -or square to each other. - -An English authority recommends the use of two drawing-boards, 42 inches -long and 30 inches wide, made of plain stuff, without cleets, 1¹⁄₄ -inches thick--seasoned--with edges perfectly straight and at right -angles to each other. _With two boards, one may be used for sketching -and drawing details and the other for the finished drawing._ - -The board should be ³⁄₄ inch in thickness, and fitted at the back, at -right angles to its longest side, with a couple of hardwood battens, -about 2 inches wide and ³⁄₄ inch thick; the use of these battens being -to keep the board from casting or winding and to allow of its expansion -or contraction through changes of temperature. This latter purpose, -however, is only effected by attaching the battens to the back of the -board in the following manner: ... At the middle of the length of each -batten--which should be one inch less than the width of the board--a -stout, well-fitted wood screw is firmly inserted into it, and made to -penetrate the board for about ¹⁄₂ inch, the head of the screw being made -flush with the surface of the batten; on either side of the central -screw, two others, about 3¹⁄₂ inches apart, are passed through oblong -holes in the battens, and screwed into the body of the board until their -heads are flush with the central one; fitted in this way the board -itself can expand or contract lengthwise or crosswise, while its surface -is prevented from warping or bending. - -[Illustration: Fig. 141.] - -A further improvement in such a drawing board as above shown is made by -cutting lengthwise along its ends a narrow groove and inserting an ebony -or hardwood strip; this is cut or sawn apart at about every inch to -admit of contraction; this strip serves as a guide to the stock of the -drawing square, allowing an easy sliding movement. - -To produce really good work in the shape of a mechanical drawing, one -perfect straight edge only is required on a drawing board, and that the -left one, which is always known as the _working-edge_; but for the -convenience of being able to draw a long line across the board at right -angles to its lower edge, this edge is made truly square with that on -the left side of the board. - -The details for building these drawing boards are given, because they -are easy to be made by one who understands the use of a few wood-working -tools; while the boards themselves are difficult of transportation--in -case of the change of residence of their owners--quite unlike the -instruments which are to accompany them. - -Fig. 141 represents the board which has been described in the text, with -provisions for the contraction and expansion; the very dark lines are -intended to represent the ebony insertions--as described. Fig. 140 -represents a plain pine board with dovetailed battens. - -[Illustration: Fig. 142.] - -Fig. 142 represents the common means used to attach or secure slightly -or temporarily the drawing paper to the drawing board; these are called -thumb-tacks, and are usually forced through the paper into the wood by -the hand, whence they are easily detached. These are made to have as -slight a projection as may be, so as not to interfere with the free -movement of the tee-square. - -For mechanical drawing the invariable practice is to secure the paper on -which the drawing is to be made to the drawing board by pinning it; this -is effected by various kinds of _drawing pins_ or _thumb-tacks_. - -The best kind for this purpose have a head as thin as possible without -cutting at its edges, slightly concave on the under side next the paper, -and only so much convex on its upper side as will give it sufficient -thickness to enable the pin to be secured to it; better use four or more -small pins along the edge of a sheet of paper, than use one clumsy, -badly made pin at each end. - -[Illustration: Fig. 143.] - -[Illustration: Fig. 144.] - -Fig. 143 and fig. 144 represent a pair of plain trestles or horses in -common use for supporting large size drawing boards. This pattern is -found frequently in the laying-out shop. Fig. 145 and fig. 146 represent -_adjustable_ horses or trestles--these are designed, primarily, for -office use. As will be seen by viewing the illustration, the upper part -is supported by two hard-wood sliding pieces; these are provided with -strong pins and numerous holes, and pass through the frame of the -trestle, as shown, so that the upper portions can be arranged at any -angle convenient to the draughtsman, as he lies over his work or stands -by it. - -[Illustration: Fig. 145.] - -[Illustration: Fig. 146.] - -Fig. 137 is introduced to exhibit the paper attached to the drawing -board with the thumb-tacks, and with the T-square and set-squares -arranged to commence work; the paper should not extend to the edges of -the board; three, four or more tacks may be used on each edge of the -sheet of paper, instead of two, as shown in illustration. - -[Illustration: Fig. 147.] - -A most convenient--and except for its extreme lightness, which is not -good in a drawing stand--a most admirable device is shown in fig. 138. -The drawing table is simply a drawing board with folding legs; these are -made from hard-wood, while the top is made of soft, seasoned pine, with -square corners; while the device is strong and well braced, it can be -folded and easily carried about--all as shown in the illustration. - -[Illustration: Fig. 148.] - - -THE TEE-SQUARE. - -This is an instrument in the form of a letter T, as shown in the figures -149 and 150; the two parts are known as _stock_ and _blade_; the -horizontal part of the letter (T) is the stock, and the vertical part -the blade--hence the name, T-square; to form the square, the two parts -are joined together in such a way as to make them exactly at right -angles to each other; the stock, which is applied to the working edge of -the drawing board, being about one-third the length of the blade, and -about three times its thickness. - -[Illustration: Figs. 149 and 150.] - -To be perfect in construction, a tee-square should be as light as is -consistent with its necessary strength and stiffness of parts; it should -be made of suitable material easily manufactured, put together, and -repaired, and withal as truly correct as is possible to be made. Such a -square is represented in fig. 148; it has a taper blade, which is -generally about double the width where secured to the stock as it is at -the end. - -[Illustration: Figs. 151 and 152.] - -The manner in which the stock is united to the blade determines its -adaptability or otherwise to the use made of it; in some the stock is -rectangular in section, and the blade mortised into it; in others the -blade is dovetailed and let into the stock for the whole of its -thickness. - - -ADJUSTABLE BLADED SQUARE. - -In cases where many parallel lines have to be drawn, of lengths beyond -the capabilities of ordinary set-squares, and in directions other than -square with or parallel to the working edge of the drawing board it is -convenient to have for use an _adjustable_ bladed tee-square, or one -whose blade can be set at any desired angle. The blade of such a square -should be tapered as in illustration, but shaped at its wide end as -shown, and having a stock wide enough to allow for the surface required -in the washers of the fittings necessary to make the blade adjustable. -These fittings, though requiring to be well made and neatly finished, -are not expensive or difficult to make, as they consist merely of two -washers, a square-necked bolt, and a fly nut. - -The tee-square, as shown, has four parts: 1, blade; 2, fixed head; 3, -shifting head; 4, swivel. The head is held firmly by the left hand to -the left edge of the drawing board, and the blade serves as a -straight-edge for horizontal lines that may extend the whole length of -the paper. It can be used for either horizontal, or, by reversing to the -bottom of the board, for vertical lines; and, by turning it over, so -that the shifting head is against the edge of the drawing board instead -of the fixed head, lines at different angles may be drawn. The length of -the blade should be the length of the drawing board; if it is shorter, -inconvenience will be experienced when lines the whole length of the -board are wanted. - - -TRIANGLES, OR SET-SQUARES. - -Set-squares are invariably used in connection with the tee-square, as -shown in fig. 148. The illustrations below show several patterns of the -device; by these, vertical lines, triangles, squares and hexagonal, -octagonal and twelve-sided figures, diagonal section lines, etc., can be -easily drawn. For ordinary purposes, a triangle or set-square with -angles of 45° may be 4 inches long and the other 8 inches in length, but -a six-inch set-square having angles 90°, 45° and 45°, and an eight-inch -one having angles of 90°, 60° and 30°, will be found sufficient for all -purposes; there are other triangles used specially for making letters. - -[Illustration: Fig. 153.--Fig. 154.--Fig. 155.--Fig. 156.] - -In practice the triangles or set-squares are slid along the edge of the -blade, and need not be any thicker than it. - - -PARALLEL RULE. - -[Illustration: Fig. 157.] - -This instrument is used to mark lines which are neither horizontal nor -vertical (usually these are drawn by the square and set-square), and -which are parallel to one another; by adjusting the edge of the parallel -ruler to a line, it can be extended or opened out (or vice-versa -closed), and the line or lines drawn will be parallel or equally distant -from the base or first line it was set by. See fig. 157. - -Fig. 158 is a parallel ruler, constructed with two rollers fixed on a -rod so that they move the same distance, carrying the ruler parallel to -the starting line. - -[Illustration: Fig. 158.] - - NOTE.--It has been said that “a workman may be known by his tools,” - but the statement must be taken with a good deal of allowance. Some - workmen may possess a very fine set of tools and never use them, - because they have not the ability or inclination to learn how; - especially is this the case with drawing instruments. - - If all the fine sets of drawing instruments that are owned by workmen - were put to frequent use the owners would find a marked improvement in - their abilities in other lines as well as drawing; for it is a - noticeable fact that when a person’s mind has been trained in a - business that requires close calculation and a knowledge of materials, - he is capable of showing good qualifications in other lines, and the - more skilled he is in one the easier can he acquire skillfulness in - another, if he applies the same amount of energy, thought and interest - as he did to acquire skill in the first. - - -SECTION LINER. - -Fig. 159 shows an improved section liner which can be adjusted to any -angle, and will space the parallel lines at any desired regular -distance. - -[Illustration: Fig. 159.] - - -IRREGULAR CURVE OR SCROLL. - -Irregular curves, or, as they are sometimes termed, sweeps, represented -by figs. 160-166, are used for curves that cannot be put in by the other -instruments. They are very useful when elliptical or parabolic curves -are desired, in preference to circles or arcs of a circle. They are much -used in design and architectural drawing. They are made of thin hardwood -or rubber, and sometimes of horn. - -[Illustration: Figs. 160-166.] - -[Illustration: Fig. 167.] - -[Illustration: Fig. 168.] - -Curves are irregular lines; a circle is a regular line. If a curve is to -be passed through a number of predetermined points it should be first -sketched in lightly, free-hand; a section of the scroll is then applied -to the curve so as to embrace as many points as possible; only the -central points of those thus embraced should be inked in; this process -is continued until the desired curve is completed. - -Curves are made of various material, pearwood, cardboard, xylonite, hard -rubber, and a strip of soft lead is sometimes used, which may be easily -adjusted to the curve required. - -The curves generally used in mechanical drawing are shown on previous -page. - -Fig. 208, page 134, is a logarithmic _spiral_ curve. It is -mathematically constructed and contains every curve within the limit of -its size. - - -ELLIPSES. - -An ellipse is a geometrical figure, and can be drawn as described in -geometrical problem 29, page 96; many drawing offices keep sets of hard -rubber ellipses, to economize time constructing them. - -[Illustration: Fig. 169.] - -[Illustration: Fig. 170.] - - -DRAWING PENCILS. - -These are instruments for marking, drawing or writing, formed of -graphite, colored chalk or materials of similar properties, and having a -tapering end, inclosed, generally, in a cylinder of softwood. Fig. 167 -represents a ruling pencil; its point is a parallelogram or of a wedge -shape. In ruling, the length view rests against the square; its shape -gives considerable strength to the lead and allows the making of a very -fine line. Fig. 168 differs in the point of the pencil shown, as may be -observed in the illustration. - -A pencil that is hard is best for mechanical drawing; one that will -retain a good point for some considerable time. Pencil lines should be -made as light as possible; the presence of lead on the surface of the -paper tends to prevent the ink passing to the paper, and in rubbing out -pencil lines the ink is reduced in blackness, and the surface of paper -is roughened, which is a disadvantage. As little erasing or rubbing out -as possible should be done. - - -DIVIDERS AND COMPASSES. - -These instruments, while they appear alike, have a separate use: the -dividers are used to space off distances and dimensions; especially are -they necessary in reading drawings made to scale. _Compasses_ are used -for describing circles, curves, etc., _dividers_ are used for marking -out spaces. - -Two forms of the dividers are shown in figs. 169 and 170; the simplest, -plainest form is shown in fig. 169; these are used for rough spacings; -fig. 170 represents a pair of dividers fitted with an adjustable screw -controlled by a steel spring in one leg; by this a very exact -measurement can be made. Fig. 170 is intended to exhibit what is called -a “hair-spring divider.” - - -PROPORTIONAL DIVIDERS. - -These dividers differ from the ordinary ones shown in figs. 169 and 170 -in that they are provided with four steel points, one pair of which -being set to the full dimension will be reproduced by the other pair, -but in a smaller, or reduced size. - -Fig. 171 are “bisecting” dividers, being proportional dividers, which, -when open, one end measures double the distance of the other. - -Fig. 172 are proportional dividers; the points at one end are capable of -being changed, to measure practically any desired proportion at the -other end, by altering the position of the pivot where the legs cross -one another. The lower connecting link is a micrometer adjustment, for -minute measurements. - -Fig. 173 are proportional dividers which are marked for the proportions -of lines and radii of circles, being provided with a rack movement for -adjustment. - -Fig. 174 represents three-leg dividers, used for taking the position of -three points; this instrument is very useful in finding the position of -a point in a figure. - -[Illustration: Fig. 171.--Fig. 172.--Fig. 173.--Fig. 174.] - -[Illustration: Fig. 175.--Fig. 176.--Fig. 177.--Fig. 178.--Fig. 179.] - - -COMPASSES. - -Compasses consist of two pointed legs; they are instruments for -describing circles or for--sometimes--measuring figures, in absence of -dividers. Fig. 175 represents compasses fitted as dividers. - -Compasses should have jointed legs, which will allow the points to be -placed at right angles to the paper, whatever the size of the circle to -be drawn. Compasses should not be used for circles which are too large -to allow the points to be thus placed; a lengthening bar is generally -provided, which greatly increases the diameters of circles which may be -drawn by this attachment; it is shown in fig. 176. - -One leg of the compasses is usually provided with a socket to which are -fitted three points: a divider point, fig. 179; a pencil point, fig. -177; and a point, fig. 178, carrying a special pen for the inking of -circles. Each of these points is generally provided with a joint, so -that it may be placed at right angles to the paper. - -The other leg should be jointed; it is often provided with a socket -which receives two points, one a divider point, and the other carrying a -needle point. Such an instrument may be used as dividers for spacing, or -as compasses for penciling or inking circles. - -The joint at the head of the compasses (see fig. 175) is the most -important feature. It should hold the legs firmly in any position, so -that in going over a circle several times only one line will result. It -should allow the legs to move smoothly and evenly, and should be capable -of adjustment. - -[Illustration: Fig. 180.--Fig. 181.--Fig. 182.--Fig. 183.--Fig. 184.] - -As shown in fig. 174, one leg has a hinge or joint, and a needle point, -which can be regulated by a thumb screw; the other leg has a socket or -recess into which interchangeable parts can be inserted. The four -figures to the right of the compasses show the parts which are provided -with shanks or insertion pieces. Fig. 180 and fig. 181 represent -compasses specially used for making small circles, and work too minute -for the larger instruments described above. - -To do work of this nature easily a pair of spring dividers are -frequently used. This instrument has one point attached to a spring, -which is regulated by a screw, so that very slight changes in the space -may be made with ease. - -Compasses specially used for putting in fine circles and dimensions are -called “bows.” When a pen point it is a “bow pen,” with a pencil point a -“bow pencil,” and if with needle point a “bow dividers.” Fig. 180 is a -“bow dividers”, this fitted with screw for fine adjustment in one leg, -fig. 181, is called a “hair-spring bow dividers”; for small details, -bows with steel spring legs without any joint are used; these are called -“steel-spring bows.” - -[Illustration: Fig. 185.--Fig. 186.--Fig. 187.] - - -SPRING BOWS. - -These were originally developed from the common form of compasses, with -a single spring leg; later, the demand for smaller sizes made changes -necessary, and spring bows are now made symmetrical, both sides of the -bow being made to “spring.” - -Fig. 182 are spring dividers. - -Fig. 183 is a spring pencil. - -Fig. 184 is a spring pen. - -In these figures it will be seen that the two threads, a right and a -left, are moved with one central thumbscrew; in the figs. 185 to 187 a -single screw is used. - -In choosing spring bows, care must be exercised to select a sufficiently -strong, stiff spring, as the relation between spring pressure and -thumbscrew is important. - - -BEAM COMPASSES AND TRAMMELS. - -In fig. 188 is shown a set of beam compasses, together with a portion of -the wooden rod or beam on which they are used. - -[Illustration: Fig. 188.] - -The latter, as will be seen by the section drawn to one side, _A_, is in -the shape of a T. This form has considerable strength and rigidity. Beam -compasses are provided with extra points for pencil or ink work, as -shown. - -While the general adjustment is effected by means of the clamp against -the wood, minute variations are made by the screw, _B_, shifting one of -the points, as shown in the figure. - -This instrument is quite delicate, and, when in good order, is very -accurate. It should be used only for fine work on paper, and never for -scribing on metal. - -[Illustration: Fig. 189.] - -A coarser instrument, and one especially designed for use upon metal, is -shown in fig. 189, and is called a trammel. There are various forms of -this instrument, all being the same in principle. The engraving shows a -form in common use. A heavier stick is used with it than with the beam -compasses, and no other adjustment is provided than that which is -afforded by clamping against the stick. - -In the illustration, a carrier at the side is shown, in which a pencil -may be placed. Some trammels are arranged in such a manner, that either -of the points may be detached and a pencil substituted. - -A trammel, by careful arrangement, can be made to describe very accurate -curves, and hence can be used in place of the beam compasses in many -instances. For all coarse work it is to be preferred to beam compasses. -It is useful for all short sweeps upon sheets of metal, but for curves -of a very long radius a strip of sheet iron or a piece of wire will be -found of a more practical service than even this tool. - -The length of rods for both beam compasses and tramels, up to certain -limits, is determined by the nature of the work to be done. The extreme -length is determined by the strength and rigidity of the rod itself. It -is usually convenient to have two rods for each instrument, one about -1¹⁄₂ or 2 feet in length and the other considerably longer--as long as -the strength of the material will admit. - - -DRAWING SCALES. - -Scales are proportioned rules or mathematical instruments of wood, -metal, etc., on which are marked lines and figures for the purpose of -measuring sizes and distances. It is usual to make scales in the -proportion of parts of an inch equalling a foot; the most generally -adopted scale for machine drawing is one and a half inches, equalling -one foot; that is, twelve-eighths of an inch (each eighth of an inch -representing one inch); there is no fixed rule in the choice of a scale, -as they are varied according to the coarseness or fineness of the parts -of the machine to be drawn and the space or surface of paper to be -utilized. - -When objects are of moderate proportions they may be represented full -size; but when large, the drawings must be smaller. Standard scales for -mechanical drawings are ¹⁄₂, ¹⁄₄, ¹⁄₈ and ¹⁄₁₆ full size. These scales -are often written 6″ = 1 ft.; 3″ = 1 ft.; 1¹⁄₂″ = 1 ft., and ³⁄₄″ = 1 -ft. - -[Illustration: Fig. 190.] - -[Illustration: Fig. 191.] - -Instead of selecting one of the scales named or one found upon the -ordinary scales used by draughtsmen, drawings may be made to any scale -whatever. Thus, if any object is to be represented in a certain space, a -scale should be constructed which will cause the whole of the object to -be shown. - -Drawing to Scale.--The meaning of this is, that the drawing when done -bears a definite proportion to the full size of the particular part, or, -in other words, is precisely the same as it would appear if viewed -through a diminishing glass. - -The two-foot rule shown in fig. 192 is the most useful instrument for -the comparison of linear dimensions--it can be used as a scale of -one-twelfth, or 1 inch equal to a foot, 12 inches = 12 feet, it being -divided into portions or spaces, each of which is subdivided into -halves, quarters, eighths and sixteenths; frequently in the latter class -of two-foot rules there are graduations of scales, and it is then also -called a draughting scale. - -Fig. 190 represents a flat scale, graded so that one inch represents a -foot--¹⁄₁₂th size--etc., as shown. - -Fig. 191 represents a triangular scale (broken). The triangular scale -should read on its different edges as follows: Three inches and 1¹⁄₂″ to -one foot, 1″ and ¹⁄₂″ to one foot, ³⁄₄″ and ³⁄₈″ to one foot, ¹⁄₄″ and -¹⁄₈″ to one foot, ³⁄₁₆″ and ³⁄₃₂″ to one foot, and one edge read -sixteenths the whole 12″ of its length. - -Fig. 190 shows such a scale broken. An explanation of the 1″ and ¹⁄₂″ -side will suffice for all. Where it is used as a scale of 1″ to one -foot, each large space, as from 0 to 12 or 0 to 1, represents a foot, -and is a foot at that scale. There being 12″ in one foot, the twelve -long divisions at the left represent inches; each inch is divided into -two equal parts, so from 0 to one division at the left of 9 is 9¹⁄₂″ and -so on. The 1″ and ¹⁄₂″ scales being at opposite ends of the same edge, -it is obvious that one foot on the 1″ scale is equal to two feet on the -¹⁄₂″ scale, and conversely, one foot on the ¹⁄₂″ scale is equal to six -inches on the 1″ scale; and 1″ being equal to one foot, the total feet -in length of scale will be 12; at ¹⁄₂″ to 1 foot the total feet will be -24. - -In working to regular scales, such as ¹⁄₂, ¹⁄₈, or ¹⁄₁₆ size, a good -plan is to use a common rule, instead of a graduated scale. There is -nothing more convenient for a mechanical draughtsman than to be able to -readily resolve dimensions into various scales, and the use of a common -rule for fractional scales trains the mind, so that computations come -naturally, and after a time almost without effort. - -The protractor shown in fig. 193 is an instrument for laying down and -measuring angles on paper; it is used in connecting with a scale to -define the inclination of one line to another. - -Protractors have the degrees of a half circle marked upon them; as the -whole circle contains 360 degrees, half of it will contain 180, -one-quarter 90, etc. Hence, protractors showing 180° exhibit all that is -needed. To protract means to extend, so this instrument is also useful -in “extending” the lines of inclination at the circle. - -[Illustration: Fig. 192.] - -[Illustration: Fig. 193.] - - -DRAWING-PENS. - -A special pen called a drawing-pen, and also special ink, are required -to ink a drawing; figs. 194 and 195 represent two sizes of -drawing-pens--one being best adapted for fine work, and the other for -coarse or heavy line work. The points, as will be observed in the -illustration, are made of two steel blades which open and close as -required for thickness of lines by a regulating screw. - -[Illustration: Fig. 194.] - -[Illustration: Fig. 195.] - -A good drawing pen should be made of properly tempered steel, neither -too soft nor hardened to brittleness. The nibs should be accurately set, -both of the same length, and both equally firm when in contact with the -drawing paper. The points should be so shaped that they are fine enough -to admit of absolute control of the contact of the pen in starting and -ending lines, but otherwise as broad and rounded as possible, in order -to hold a convenient quantity of ink without dropping it. The lower -(under) blade should be sufficiently firm to prevent the closing of the -blades of the pen, when using the pen against a straightedge. - -[Illustration: Fig. 196.] - -[Illustration: Fig. 197.] - -The spring of the pen, which separates the two blades, should be strong -enough to hold the upper blade in its position, but not so strong that -it would interfere with easy adjustment by the thumbscrew. The thread of -the thumbscrew must be deeply and evenly cut so as not to strip. - -An important requisite after the pencil lines have been put in is ink, -with which to line the drawing. This should be of the best that can be -procured. The pen is filled by dropping the ink between the blades, or -nibs, while held in a nearly vertical position, as shown in fig. 196. - -Liquid India ink can be procured in bottles with glass tube feeders, -which are very good, and keep the hands and fingers free of the ink. -Fig. 197 is a sectional view of such a bottle and “filler,” or feeder. -This generally answers all requirements, but the dry ink of good -quality, in sticks or bars, cannot be surpassed, although it requires -skill for its preparation. Fig. 198 represents a sloping dish or “tile” -for mixing, which should be done with little pressure, in clean, -filtered or distilled water, care being taken to keep the liquid free of -dust, which obstructs the free flow of the ink in the pens. - -[Illustration: Fig. 198.] - -The bars of India ink are shown, as they are imported, in figs. 199 to -202. - -Pure India or China ink is only made in those countries, because the -special wood from which it is prepared is found only in those regions. -So-called India inks, made of lampblack and animal glue, are only -imitations; therefore India ink should be purchased from a reliable -importing house--shape is little guarantee of quality. - -[Illustration: Fig. 199.--Fig. 200.--Fig. 201.--Fig. 202.] - -[Illustration: Fig. 203.] - -Soft gray vulcanized rubber (fig. 203) should be used for cleaning -drawing paper; for erasing any portion of a line in pencil, a piece of -prepared white vulcanized rubber is the best, small in size and of -rectangular shape (see fig. 205). - -[Illustration: Fig. 204.] - -[Illustration: Fig. 205.] - -[Illustration: Fig. 206.] - -[Illustration: Fig. 207.] - -An ink eraser is made of a composition of rubber and ground glass, and -it should be used as sparingly as possible on drawings, as it roughens -the paper and removes the gloss from its surface (see fig. 204). Steel -ink erasers are useful in removing defects, overrun lines, joint of -lines if swollen, etc.; they have a fine point and can be used to -advantage with a little practice; they are used with a scratching, not a -cutting, motion (see figs. 206, 207). - - -DRAWING PAPER. - -The first thing to be considered in selecting drawing paper is the kind -most suitable for the proposed plan. Paper may be purchased in sheets 22 -× 30 inches, that make four exercise sheets 11 × 15 inches; this may be -of several grades and tints. - -The qualities that constitute good paper are strength, uniformity of -thickness and surface, neither repelling nor absorbing liquids, -admitting of considerable erasing without destroying the surface, not -becoming brittle nor discolored by reasonable exposure or age, and not -buckling when stretched, or when ink or color is applied. - -The sizes and names of paper made in sheets is as follows: - - Cap 13×17 ins. - Demy 15×20 „ - Medium 17×22 „ - Royal 19×24 „ - Super Royal 19×27 „ - Imperial 22×30 „ - Atlas 26×34 „ - Double Elephant 27×40 „ - Antiquarian 30×53 „ - -For large drawings paper is made in rolls. “Detail paper” is especially -made for marking out new designs; it is made in rolls 36, 42 and 54 -inches wide; it has excellent erasing qualities and takes ink and color -with facility. - -When working by artificial light it is desirable that the paper be of a -light-brown color, which is less trying to the eyes than a pure white. - -If it is a shop drawing or sketch not to be preserved, use detail paper, -which is the most economical and will stand a great deal of handling -without becoming soiled. If it is a detailed plan, finished drawing or a -picture, use the best white drawing paper to be obtained, so that your -drawings can be preserved indefinitely without danger of fading, which -is due either to the paper being poorly made and discoloring with age, -or being of poor fiber and absorbing the ink or color, and the drawing -consequently losing its brightness. - -After deciding on the size of paper most suitable for the work, then -carefully select the paper embracing the most qualities of value for the -proposed drawing. - -[Illustration: Fig. 208.] - - -[Illustration: MECHANICAL DRAWING] - -[Illustration: Fig. 209.] - - - - -Mechanical Drawing. - - -In distinction to “free-hand,” mechanical drawing is executed almost -entirely by the use of the instruments previously described; hence its -other term, instrumental drawing. To define it particularly it may be -said that,-- - -Mechanical drawing is the correct reproduction of any figure or part of -a machine, whether of full size or reduced in the proportion of one part -to another; it also comprises the art of delineating the interior parts -which are hidden from view in solid bodies. - -A mechanical drawing is the vehicle for conveying the ideas of the -designer to those who are to embody them in wood and metal, and the -considerations which should govern its production are those which affect -its clearness and legibility or those which facilitate reference to it. - -Drawings consist of plans, elevations and sections; plans being views on -the top of the object in a horizontal plane; elevations, views on the -sides of the object in vertical planes; and sections, views taken on -bisecting planes, at any angle through an object. - -Drawings in true elevation or in section are based upon flat planes, and -given dimensions parallel to the planes in which the views are taken. - -Two elevations taken at right angles to each other fix all points, and -give all dimensions of parts that have their axis parallel to the planes -on which the views are taken; but when a machine is complex, or when -several parts lie in the same plane, three and sometimes four views are -required to display all the parts in a comprehensive manner. - -A man must have either a natural talent for hand-drawing or years of -experience, before he can produce a sketch and “dimension” it, fit to -work from; hence the elementary character of the examples given for -practice. A “pretty” drawing is not expected from a beginner; it should -always be borne in mind, that correctness of dimensions and general -clearness, rather than elaborate finish, are what will save the battle -in the days of competition. - -Mechanical drawings should be made with reference to all the processes -that are required in the construction of the work, and the drawings -should be responsible, not only for dimensions, but for adaptation to -fitting, forging, pattern-making, moulding, and so on. - -Every part laid down should have something to govern it that may be -termed a “base”--some position which, if understood, will suggest size, -shape and relation to other parts. Searching after a base for each and -every part and detail, the draughtsman should proceed upon a regular -system, continually maintaining a test of what is done. - -A mechanical drawing consists chiefly of three views: - - 1. The plan or top view. - 2. The side elevation. - 3. The end elevation. - -In addition to the above, drawings are used to show interior portions of -the figure; these are termed “sections,” and they may be taken where any -plane crosses another. - - NOTE.--The word _elevation_, as applied to mechanical drawings, means - simply a view; hence a side elevation is a side view, or an end - elevation is an end view. - - The word _plan_ is employed in place of the word top; hence a plan - view is a top view or a view looking down upon the top of the piece. - - A _general_ view means a view showing the machine put together or - assembled, while a detail drawing is one containing a detail, as a - part of the machine or a single piece disconnected from the other - parts of the whole machine. - - - - -Penciling. - - -[Illustration: Fig. 211.] - - It is very nearly true, as has been said, that every mechanical - drawing is, in the first instance, penciled; if this is so, then more - work is done with the pencil than with the pen; therefore the first - attention of the student of mechanical drawing should be directed to - the following instructions for penciling a drawing. - - With all necessary materials in hand, and in good order for the - beginning of a drawing, the first thing to do is to pin the paper on - the board quite square. - - To do this effectively, lay the paper flat and put on the T-square - with its head at the left side of the board; slide the square up - nearly to the top, and arrange the paper level with the blade; with - the right hand hold the paper still and move the square down a little; - now, pin the top of the paper with thumb-tacks. - -Next, pressing the square lightly to the paper, slide it down to the -bottom and pin that part of the paper to the board. The paper must not -project outside or over the edges of the board, and the pins or -tack-heads should be forced down flush with the paper, so as not to -interfere with the free movement of the tee-square up and down the board -as occasion may require. - -The accuracy of the work depending upon their condition, it is first -needful to see that the pencil and pencil compasses are properly -sharpened. Reference is made to valuable directions contained on pages -beginning with 55, under the heading of “Free-hand Drawing,” to which -may be added that-- - -All lines should be drawn with the pencil slightly inclined in the -direction in which it is moved. - -Any and all lines not needed in the finished drawing should be erased at -one time after the final lines have been determined, for the surface of -the paper is soiled very quickly when worked upon after erasures have -been made. - -The working lines and other lines that are to be removed should be -erased when the drawing is ready to finish and before its outlines have -been strengthened, in order that the final lines may be left in perfect -condition. - -To show where the lines meet or terminate it is needful that all pencil -lines pass the actual ending place, making a distinct intersection. This -does not apply to “inking in” the lines, but rather to prevent the -over-drawing of the ink lines, because the edge of the rule and the pen -itself obstruct or partly cover the view of the line, it is very liable -to pass over or beyond the required point in inking the lines, which -must not occur. - -In the preliminary operation of producing a regular mechanical or -instrumental drawing, it is necessary to make a “sketch,” in pencil, of -the object to be represented. The AMERICAN MACHINIST has given in a few -words the order to be followed, in effecting the best results; we quote, -as follows: - -“In making a free-hand sketch of an object from the model it is well to -observe the following order: Look the model over carefully and determine -the number of views necessary to illustrate it fully, drawing the same, -free-hand, in their proper relation to each other, on sketching paper. -Look the sketch over carefully to see that nothing has been omitted, and -put on dimension lines, after which scale the model carefully and put on -dimensions. Do not put in the dimensions at the same time the dimension -lines are drawn; have all the dimension lines in place before attempting -to insert dimensions. - -“Follow the same order in making the drawing with instruments as was -used in making the sketch; that is, draw the views in their proper -relation to each other, put in dimension lines, then dimensions, and -lastly notes and title. If section drawing is made, do not draw section -lines in pencil.” - - -POINTS TO BE OBSERVED IN SKETCHING. - -1. Especial attention is to be paid to outlines--edges of plane surfaces -are lines; when a line is made it represents the edge or outside of -something. - -2. Learn to be accurate before being rapid. - -3. A sketch should be intelligible to any one, even if they are -unacquainted with drawing. - -4. Horizontal and vertical lines and a few curves will enable one to -make almost any simple sketch. - -5. It must be also remembered in making drawings from actual measurement -that the instruments are not in the first place employed; the rough -sketch is first made and then it is converted into a drawing. The -draughtsman makes a rough sketch entirely by the hand and eye, measures -the various parts, and jots down the measurements in his sketch; after -this he reduces the whole to the desired scale, and proceeds to make his -mechanical drawing. - -6. Let the sketch book be the constant companion of the student; it may -be advantageously filled with outlines of machine or other work suitable -for preservation, to be made into finished drawings, or for reference. -Sketches are often valuable for reference as aids in originating new -designs. - -7. A sketch, when possible, should have all the dimensions written upon -it, but-- - -8. Sketches in shop practice should not take the place of -working-drawings; the latter have a check upon them in being drawn to a -scale--hence the figures written upon them and dimensions by scale must -agree. - -9. Place title and date on each sketch--no matter how seemingly -unimportant--for future reference. - -10. Practice sketching at every favorable opportunity. There is no -necessity for detail at first--simply the outlines of the article and -its parts. - -11. Sketch-books, with paper bound in cloth covers, are utilized for -bold, off-hand sketches by experienced draughtsmen, but a single sheet -of paper, used on both sides, is not unworthy of service in an -emergency--or even the blank side of a letter may be available. -Sketching-blocks, or paper “pads,” 4 × 6, or more, in size, and -containing 48 sheets, are sold by stationers, and are found to be most -convenient to have in hand and for practical use. Portfolio-envelopes, -made of extra length paper (manila) are useful in filing away sketches -and drawings. The size 10¹⁄₂ × 15 is used for United States Patent -Office drawings. - -The function of the pencil--in mechanical drawing--is to make a path for -the pen to follow. If it were possible to make a drawing with all its -lines ending at the proper place, at the first time, there would be no -necessity for using the pencil. One is obliged, however, so to use the -pencil that all lines pass beyond the actual ending place, thus making a -distinct point for the drawing pen to stop at. - -The pencil should be pressed to the paper just enough to make a clean, -fine line, and no more; once over the path is sufficient, if the line is -visible and true. - -To sharpen drawing pencils, 1, use a fine file, after taking off enough -of the wood with a knife; 2, make a conical point for the free-hand -drawing pencils and a chisel point for ruling and marking distances. - -Pencil compasses are instruments where one leg is provided with a pencil -point. Fig. 209 shows the mode of manipulation of those shown in fig. -180 and fig. 181. - -The pencil compass is held by the projection above the joint between the -thumb and first finger, which enables it to be rotated by a movement of -the finger without causing any undue pressure on the points. Should much -pressure be applied, there is a tendency to force the point or center -through the paper, making an ugly center mark; at the same time the -pressure tends to break off the pencil point. - -These few illustrations from fig. 212 to fig. 219 are made designedly -simple, so that they may be utilized in “free-hand” work, for which they -are good practice, as well as serving for examples in mechanical -drawing. - -[Illustration: Figs. 212.] - -Figs. 212, showing a spool or bobbin, exhibit three views, viz.: front -elevation or plan, and section; both are drawn with simple lines, the -end elevation by circles. - -[Illustration: Fig. 213.--Fig. 214.] - -Figs. 213 and 214 are two side views of a hexagon head bolt. Figs. 216 -and 217 are a square head bolt--two side views and end view. Figs. 218 -and 219 are a front and edge view of a forked or double joint. - -[Illustration: Figs. 215.] - -Figs. 215 show three views of a file handle; the front view and section -are practice for compound curves and curved lines meeting straight ones; -all these are capable of being produced by instruments. - -Moreover, many of the views and illustrations used to instruct and -explain machine tools and other devices in other parts of the volume, -are drawn so that they may be used also as examples in advanced -instrumental practice. This is a “hint” to the diligent and painstaking -student worthy of remembering. - -[Illustration: Fig. 216.--Fig. 217.--Fig. 218.--Fig. 219.] - -The designing and drawing of arcs and whole circles occupy a large -proportion of space in nearly all mechanical drawings. The making of a -complete circle is a matter of no great difficulty, but the beginning -and termination of parts of circles require both judgment and -considerable practice. - -To aid the student these two illustrations of circles are introduced. To -draw fig. 220 with a pencil, using the upper edge of the blade of the -T-square as a guide, draw a center line, _A B_, mark on it a distance of -4 inches, space this into half inches, using the dividers and making the -points with it; then with the pencil compasses or bow pencil, which must -be held as shown on page 209, and rotated from left to right, or -clockwise, draw a series of circles through these points, tangent to one -another or all touching at _A_, care being taken that the pencil lines -exactly meet at _A_, and also cut the divided points as shown in the -illustration. For fig. 221 divide the center line as before, and draw -the semi-circles on it _A B_, _B C_, meeting at _B_, and _C D_, _D E_, -etc. - -[Illustration: Fig. 220.] - -[Illustration: Fig. 221.] - -Now from center _B_ draw circles _A C_, _C E_, meeting in _C_, and so on -with the circles, arcs or segments; success in drawing this figure -depends on the correct spacing of the center line in the first instance -into equal parts. - -The T-square should be used for drawing horizontal lines only. Its head -should always be placed upon the left edge of the board. Vertical lines -should be drawn by the use of a triangle placed upon the T-square and -not by means of the T-square only; because the edges of a board are -seldom at right angles to each other, and the blade of the T-square is -often not at right angles to the head, so that lines at right angles to -each other will not result from the use of the T-square upon all edges -of the board. Only the upper edge of the T-square should be used, as the -edges are often not quite straight or parallel. - -The 45° triangle has two angles of 45° and one of 90°. The 30° and 60° -triangle has an angle of 30°, one of 60°, and one of 90°. By placing -these triangles upon the T-square, lines at any of these angles with a -vertical or horizontal line may be drawn. - -Drawings finished in ink are much more effective and desirable than -pencil drawings; but as a good inked drawing cannot be made except upon -an accurate pencil drawing, students should begin with the pencil, and -should not use ink until they are able to produce satisfactory results -in pencil. - - - - -Projection. - - - The word projection means to throw forward, and in ordinary machine - drawing it is the projecting or throwing forward of one view from - another view. - - In drawings the lines in one view or plan may be availed of to find - those of others of the same object, and also to find their shape or - curvature as they would appear in the other representations; this is - called projection-drawing. - -Fig. 222 is the illustration as shown in fig. 212 on page 143, with the -addition of dotted projection line, which illustrates the method of -throwing forward the section and the end view of the object; these two -views are procured from the plan or first figure, as shown in fig. 222. - -Fig. 224 represents the square bolt and nut shown in fig. 216, and the -mode of projecting is similarly shown by dotted lines. - -Fig. 223 shows file handle shown in fig. 215 and the mode of projecting. - -[Illustration: Fig. 222.] - -[Illustration: Fig. 223.] - -[Illustration: Fig. 224.] - -The principles upon which “projection” in drawing is based, are -illustrated in the following examples and text: As a real object can be -scaled with a foot rule, so a drawing must permit of scaling and -measuring. This measuring may take place as with the real object in full -size or the drawing may, for the sake of convenience, be reproduced and -measured in a reduced scale, as half, or in still smaller sizes. -Sometimes it may prove convenient to enlarge the drawing to twice the -natural size of the object, as a means of making it stand out more -clearly than the real size would accomplish. - -For practical purposes, it is productive of economy of time to mark the -dimensions of height and width or depth on the drawing in figures, to -avoid the scaling. This marking of the dimensions is best done at the -time of making the drawing, while the conception of the object is clear. - -To convey a correct impression of the object, all lines that are marked -to be of equal length should appear equally long on the drawing and be -capable of being scaled to such equal length; for this, it must be -assumed that the eye of the observer is equally distant from all points -of a plane through the nearest point, or one of the axes of the object, -and that the lines of sight are all parallel to each other and square to -this plane. - -In fig. 225 these lines of sight are seen as directed toward one side of -a cube or block; it will be readily understood, however, that in this -way nothing is visible and accessible for scaling and dimensioning -except this front face of the block, thus, a determination of the -dimensions of only height and width would be possible, while the -dimension of depth is entirely undetermined. - -[Illustration: Fig. 225.] - -It is thus necessary to get a view of the block from another side; the -direction in which it will be most instructive to obtain additional -views is in the direction of the breadth and of the length and square to -the lines of sight of the first view. - -Fig. 226 shows how the lines of sight would strike the object in the -three directions. If these lines should be rays of light, some of them -would pass by the body until they squarely strike the large plane -surfaces, _I_, _II_, _III_; naturally the rays of light on the faces of -the object will be retained, and cannot strike the plane surfaces, thus -leaving dark shadows of exactly the same outlines as the block; these -would be exact drawings of the faces, and if by some means they can be -fixed and retained on the plane they can be completely measured and -dimensioned. - -This throwing forward of the outline of the object in different views on -the planes is called projection of the object, and furnishes a highly -important means of fixing the outlines and dimensions in the three main -directions of height, width and depth; evidently, the light rays passing -by the front face may not all reach the plane of projection, but they -may be retained by protruding parts of the object behind the front face. -These protruding parts naturally would also be projected on the plane in -the same manner as the main body of the block. - -These projections of the protruding part are plainly visible in plane -_II_ and plane _III_, while the part would not be drawn in outline in -plane _I_. It may be imagined, however, that the greater thickness of -the body in the direction of the protruding part would intensify also -the shadow, thus outlining the face of the protruding part in plane _I_. - -It is apparent that these three projections are all needed, but as -drawing is all done in one single plane, the three projections will for -the sake of convenience have to be brought into a single plane. This can -be realized if plane _II_ is swung around axis _O Z_ and plane _III_ -around axis _O Y_, until all three surfaces are in one single plane, -which would then appear as shown in fig. 227. - -It is also possible to assume transparent planes in front of the body -and extend the parallel lines of sight forward instead of backward. Thus -an outline picture will be created on each of the three planes _I_, -_II_, _III_ in fig. 228, in a manner similar to fig. 226. For drawing -purposes, all three views again have to be brought into a single plane, -which is done by swinging _II_ around _O Z_, and _III_ around _O Y_ in -the same manner as fig. 227 was evolved from fig. 226. - -It will be noted that in fig. 229 plane _III_ is now above _I_ and plane -_II_ on the left-hand side of _I_, while in fig. 227 they were below and -at the right-hand side of plane _I_. As the swinging of the top and side -planes takes place around the edges of the front plane _I_ two systems -may thus be distinguished, according to the position of plane _I_ in -regard to the object. Fig. 226 thus represents the system of backward -projection, while fig. 228 represents the system of forward projection. - -Either system can have, however, the plane _II_ at the right- or -left-hand side edge, while plane _III_ may be attached to the top or -bottom edge of plane _I_; it is readily understood that a number of -combinations are possible for each system, as it is not necessary to -adhere absolutely to one rule. The system of forward projection is the -one generally practiced and further examples are all executed by this -system, meaning that the planes are always between the observer and the -object. - -[Illustration: Fig. 226.] - -[Illustration: Fig. 227.] - -[Illustration: Fig. 228.] - -For the clearness of the drawing, it is desirable to have all corners, -edges and outlines appear in such solid lines as they appear to the eye. -If, therefore, certain sharply defined outlines occur on one side more -than on the opposite one, it is most desirable to take the view against -the side that has the most definitely marked outlines. - -If the opposite side should show a number of wholly different features, -it may prove even desirable to show this side also, thus gaining four -views instead of the usual three, and so obtain a more complete -understanding of the shape of the object, besides giving increased -facilities for dimensioning each part of the body. - -This additional view may be taken from the sides, as well as up or down, -thus making a maximum of five views possible by which the outside of the -object may be delineated. - -Fig. 230 shows why it may be desirable to take five views of a block -that has a receding space of different outlines in each of the side and -top and bottom faces. - -It is not necessary, however, to resort to five views in such a case as -is represented in fig. 230, as the only differing feature, the circular -space in _III_ bottom, might be shown in _III_ top by dotted lines, and -the difference of _II_ right might be shown in _II_ left, also by dotted -lines. It is desirable to show four or five views only where great -complication and consequent lack of clearness through numerous dotted -lines would result from having a less number of views. - -[Illustration: Fig. 229.] - -So far the projections and views have only represented the outlines of -the object; it may often be desirable, however, to show central holes or -other perforations or variations of sections; in this case it is -possible to imagine the object cut in slices, by planes, through certain -well defined axes, or other lines of distinctive importance, and then -take a view of this sectional plane with its newly created intersections -or sharply marked outlines; thus, a section may often take the place of -the third, fourth or fifth view to great advantage. - -[Illustration: Fig. 230.] - -It is not always possible to get a view against a face or side of the -object, but, with irregularly shaped bodies or under special conditions, -it may be necessary to take a view of corners, sloping planes, curved or -irregularly shaped surfaces. - -Fig. 231 shows a hexagonal nut in the three normal projections; from the -top view it is readily seen that the front view shows the side of the -hexagon in a contracted scale, and that therefore the scaling and -dimensioning for the horizontal direction have all to be done in the top -or plan view; the front and side views convey, however, the dimension of -height correctly, and these are therefore the right places for scaling -and dimensioning in the vertical direction. - -Fig. 231 shows how a cylindrical outline appears in the three views; the -hole in the nut presents itself as circular in the top view, while it -appears in the front and side views as a rectangle. For simple objects, -it is unnecessary to show the edges of the planes, and the three views -are grouped, as regards distances and positions, as most convenient for -the execution of the drawing. - -Where sloping surfaces are of irregular form, it may be necessary to -employ help lines for their full determination in the three views. Fig. -232 shows how the surface that is produced by a slanting cut through a -cylinder would appear in the three views. The help lines are placed in -the top view in eight equal divisions around the circumference of the -cylinder. These division lines are shown by dotted lines on the cylinder -in the front and side views. Their intersections, with the sloping cut -in the front view, furnish also the height of the corresponding points -for the side view. - -[Illustration: Fig. 231.] - -By progressive determination of points, lines and surfaces, even the -most complicated bodies can be completely represented for their -reproduction in any application to mechanical or industrial purposes. - -[Illustration: Fig. 232.] - -The spur wheel shown on page 163 is an example of projection drawing. - -The wheel is illustrated in three views: fig. 235 is a side view, or -elevation; fig. 234 is a front elevation; fig. 233 is a section view on -_C D_. The section is projected from the front elevation by drawing -parallel lines from the points in front elevation where the lines are -intersected by the center line _C D_, cutting the plane of view and -showing the interior shape at _C D_. - -The side elevation, fig. 235, is projected from the front elevation, -fig. 234, by drawing parallel lines from the edges in the front view -across its face. - -In actual drawing practice the figures should be made about three times -larger than the example, and as follows: - -For the front elevation draw the center lines _A B_, _C D_, and from -their point of intersection as a center, with the compasses draw the -inner circle or hole, also the pitch line _E E_. With the dividers space -this line into nineteen equal divisions; each point on this line will be -the center of a tooth, and the distance from one point to the next one -is the pitch of the tooth. - -Now, with the dividers mark off the thickness of tooth at each side of -these points on pitch line; with the compasses draw the outer circle for -points of teeth, the inner circle for the root of teeth, and circles for -thickness of rim and hub; also circles representing the fillets at rim -and hub. For clearness and to prevent confusion these lines are shown on -one-half the wheel only, terminating in center line _C D_; all the lines -of the front elevation are now complete excepting the teeth. - -In the drawing office it is unusual to delineate all the teeth in a gear -wheel, the lines without the teeth as now completed being deemed -sufficient, giving all particulars; however, to prevent the error of -mistaking the circles it is well to represent one or two teeth on the -drawing. - -[Illustration: Fig. 233.--Fig. 234.--Fig. 235.] - -In the example, proceed and complete the entire wheel, taking on the -compasses a radius equal to the pitch of the tooth; set them on the -pitch line at the point _G_, already spaced for thickness of tooth, draw -line _H_ from pitch line to root of tooth; proceed similarly all around -the circle, completing one side. Next, reverse the operation and draw -the corresponding side of the root of tooth. Now take a radius equal to -half the space between teeth and the thickness of tooth on pitch line, -and, with center in pitch line, as shown at _I_, draw the outside or -addendum of tooth, _J_; it will be apparent that the reverse addendum of -the tooth next adjoining can be formed at the same time, with one -setting of the compasses; finish all the teeth similarly; the front -elevation will thus be completed. - -Fig. 233 is an excellent example of sectional drawing, to be executed as -follows: - -First draw the center line _L M_ of fig. 233, lay off at each side of it -half the breadth of face and of the hub; now project, from center line -_C D_, in the front elevation, fig. 234, with the T-square the upper and -lower teeth, the fillets, the chamfers, the hub and center hole, also -dot in the pitch line _F F_, take the radii and draw the fillets and -chamfers; draw section lines and the view will appear as shown in fig. -233. - -Fig. 235 is a side elevation of fig. 234, and is a fine sample of -projection, to be executed as follows: - -Proceed similarly as for fig. 233, projecting the lines from the outside -edges of the front elevation, instead of from the center line _C D_ as -in last figure, and the end elevation will be as shown in fig. 235. - -The student will be assisted in understanding this working drawing by -consulting the pages under the heading of “Gearing.” - - -[Illustration: LETTERING, INKING - -SECTION LINING] - -[Illustration: Fig. 236.] - - - - -“Inking In” Drawings. - - -When a drawing is completely finished in penciling, it should next be -“inked in” for preservation. - -Care should be used that the pen may be perfectly clean; the pen should -be held nearly vertical, leaning just enough to prevent it from catching -on the paper; the pen should be held between the thumb and first and -second fingers, the knuckles being bent, so that it may be at right -angles with the length of the hand. - -The ink should be rubbed up fresh whenever it is about to be used, for -it is better to waste a little time in preparing ink slowly than to be -at a continual trouble with pens, which will occur if the ink is ground -too rapidly or on a rough surface. - -To test ink, a few lines can be drawn on the margin of a sheet, noting -the shade, how the ink flows from the pen, and whether the lines are -sharp. After the lines have dried, cross them with a wet brush; if they -wash readily, the ink is too soft; if they resist the water for a time -and then wash tardily, the ink is good. - -Care must be exercised not to overload the pen with ink, and, like the -pencil, the pen should always be moved from left to right and from the -bottom to the top of the board. When inking, both “nibs” of the pen -point must rest evenly on the paper and the pen be pressed only lightly -against the T-square. Never ink any portion of a drawing until the -penciling is complete. - -In inking long, fine lines it is well to go over each line twice, -without moving the T-square, trying not to widen the line on the second -passage; also see that the pen contains ink enough to finish a line, as -it is difficult to continue with the same width of line after -re-filling. - -To produce finished drawings, it is necessary that no portion should be -erased, otherwise the color applied will be unequal in tone; thus, when -highly finished mechanical drawings are required, it is usual to draw an -original and to copy it. Where sufficient time cannot be given to draw -and copy, a very good way is to take the surface off the paper with fine -sand-paper before commencing the drawing; if this be done, the color -will flow equally over any erasure it may be necessary to make -afterwards. - -The rules of procedure in drawing the lines in “inking” are, 1, ink in -the small circles and curves; 2, ink in the larger circles and curves; -3, then all the horizontal lines, beginning at the top of the drawing -and working downward; 4, next ink in all the vertical lines, commencing -at the left and moving back to the right; 5, draw in the oblique lines; -6, all the center lines and dimension and reference lines. The figuring -and lettering should be always done with India ink, thoroughly black; -the last lines to be drawn are the section lines. The reason why -irregular curves and arcs of circles are inked in first is, that it is -easier to draw a straight line up to a curve than to take a curve up to -a straight line. - -In practice, the flat side of the drawing-pen is laid against the -tee-square or ruler; the taper of the blade of the pen is sufficient to -throw the point enough away from the edge to prevent blotting; the pen -is drawn from left to right and from the bottom to the top of the board. - -This is shown in fig. 237, intended to represent “short work” with the -drawing-pen. The wrist is shown resting upon the blade of the square. - -[Illustration: Fig. 237.] - -[Illustration: Fig. 238.] - -In a similar figure, 238, the position of the hand holding the pen -indicates the best relative posture for inking long lines. In one of -these illustrations the work is executed principally by the wrist--in -the other by the arms and fingers working together. - -The pen should be held with even pressure against the straight-edge or -curve. If the pressure varies, the blades will spring and the width of -the line will change. The blades should be of such length that both will -bear equally upon the paper when the pen is inclined slightly, so as to -bring the inner blade near the straight-edge; the angle of the pen -should not be changed while drawing any line. - -When the inking is finished, the whole drawing may be cleaned by rubbing -it with bread which is not greasy or so fresh as to stick to the paper. -If the paper is much soiled it may be necessary to use an eraser. A soft -pencil eraser should be used and great care taken that the ink lines are -not lightened and broken by it. - -To avoid the necessity of using an eraser upon a finished drawing, -instruments and paper must be kept free from dust and dirt. The -triangles and T-square should be cleaned often, by rubbing them -vigorously upon rough, clean paper. - -Pounce is a powder used to prevent blotting in rewriting over erasures; -it is held in a bag or small box with a perforated lid for convenience -in sprinkling on paper; when used it should be distributed evenly with a -piece of chamois, and the surplus or loose particles removed before -applying the ink. - -A drawing is made to be read, and the skill in inking, as in “free-hand” -and in penciling, does not consist so much in the fineness of the lines -as in their clearness. - - - - -Lettering Drawings. - - -Lettering is an important part of making drawings, the object aimed at -being to identify any portion by reference letter or letters; thus in -fig. 239 the line _A C_ describes the line extending from - -[Illustration: Fig. 239.] - -Any information which cannot be expressed in the drawing is always -expressed by lettering, and it is desirable to confine the lettering of -drawings to one or two standard alphabets that are plain and distinct, -and the principles of which are easily acquired. These conditions are -fulfilled in the Gothic fonts shown on page 173. - -Both letters and figures must be carefully made and of uniform -proportion; it is well to “lay out” these by regular measurement before -permanently inking them. Letters should not be less than one-eighth of -an inch in height and penciled carefully before inking. - -On page 173 are printed two forms of numerals and letters of the -alphabet; it is recommended that these be used both for practice in -free-hand and for regular office work. - -For easy reference, letters should not be crowded nor allowed to -interfere with one another; they should be drawn neatly, avoiding all -lines of the drawing; plain letters are always used on mechanical -drawings, whether for title, scale, reference, etc. - -Arrow-heads, figures and letters should be in black, and made with a -writing pen. A pen with a ball point is preferable, giving an equal -thickness of line, no matter in which direction the stroke is made. - -[Illustration: Fig. 240.] - -Neat, well-lettered drawings go far towards establishing a high standing -for the aspiring draughtsman. All lettering should be done free-hand, -first with the pencil, sharpened to a fine round point, and afterwards -written in ink. For this purpose common writing pens are best to be -used; fig. 240 represents the several numbers of the approved Gillott’s -pens adapted to this purpose. - -In lettering, it is well, for a guide for size and location, to draw, -with a round-pointed pencil, two horizontal lines just the height the -letters are to be; the letters are also best made with careful use of -the instruments, rather than free-hand. - -In order to letter systematically, it is a good plan to start with the -middle letter of the inscription and work in both directions; making too -prominent letters should be avoided, plain and distinct letters being -most desirable. - -Finally, with an ordinary writing pen, trace over the penciling in ink; -the pencil guide lines being erased after the letters are inked in -completes the operation. - -[Illustration] - -An important matter in connection with lettering a drawing is the -location of the letters; these should be so placed as not to interfere -with the lines of the drawing and should clearly point out the part -intended to be described. When single letters are used, they should be -inked in before the shade or section lines are drawn. - -Fig. 241 is an example introduced to show the method of lettering a -descriptive mechanical drawing. - -The figure shows a “blow-off valve” of approved design drawn in section; -the letters designate the several parts; the reading to accompany the -lettering is as follows: - - =A=--Inlet communicating with annular passage (_C_) to admit steam, - which blows off scale and sediment from seat (_E_) before disc (_L_) - comes in contact with same. - - =B=--Plug to permit passage of rod to clean out blow-off pipe. - - =C=--Annular steam passage around casing (_D_) and communicating with - inlet (_A_). - - =D=--Removable bronze casing, in which plug (_L_) fits snugly. - - =E=--Removable bronze seat ring, which also holds casing (_D_) in - place. - - =J=--Slot in casing (_D_) arranged to discharge sheet of steam from - _C_, which, blowing across seat (_E_), cleans off scale and sediment - before contact with disc (_L_). - - =K=--Non-rotating washer to prevent loosening of locknut (_H_) when - opening valve. - - =L=--Reversible disc, having two Babbitt-metal seating faces (_F_) - (_F_). - -[Illustration: Fig. 241.] - - - - -Dimensioning Drawings. - - -To “dimension” working drawings is to place measurements upon the parts -represented, to enable the workman to proceed without measuring the -drawing itself. - -These dimensions should be placed so as not to interfere with nor crowd -the lines of the drawing, nor yet interfere with one another. - -Arrow-heads are used at the extreme points of measurement, the figures -are generally inserted midway between the arrows; a dot and dash line -reaches from the figure to the arrow-heads, as shown below. - -[Illustration] - -When the dimension is short these lines are omitted and the dimension is -placed outside the drawing, thus - -[Illustration] - -and connected by a curved line; at other times it is found needful to -place arrow-heads outside the drawing and the measurement inside. - -[Illustration] - -When the dimension is long and narrow it is usual to carry the -dimensions under the drawing by dotted and dash lines, as shown below. - -[Illustration] - -Arrow-heads and figures should be drawn free-hand with a common writing -pen. - -Usually dimensions are given in inches, up to 24 inches, as it is found -less confusing; for instance, if written 1′ 1″ it may be mistaken for -11″; if written 13″ no mistake could be made. - -Again, 1′ 0″ may be mistaken for 10″; if written 12″ it would not; in -addition to being more distinct, it occupies less space on the drawing. -In large measurements there is more room for the figures, and, -therefore, they can be spaced further apart--in feet and inches. - -All figures should be made of a fairly large size. Vertical dimensions -should read from the right hand, thus, as shown: - -[Illustration] - -Measurements of importance, such as the diameter of a circle, the pitch -or distance apart of rivets and bolts, etc., should be marked in figures -on the drawing. When rough or unfinished work is mixed with machined or -finished portions, it is usual to mark F, or “fin.,” after the latter -dimension. - -In practice, at times, instead of dimensions reference letters are used, -thus: - -[Illustration: - - D = diam. of shaft, 2¹⁄₂ inches. - L = length of bearing, 3³⁄₄ inches. - T = thickness of collar, ⁷⁄₈ inch. - d = diam. of collar, 3¹⁄₂ inches.] - -Generally it is preferable to give the diameters of turned and bored -work on a section, instead of an end drawn separately; confusion is -sometimes caused by a number of radial dimensions. - -Fig. 242 and fig. 243 are introduced to show the principal measurements -required in practical work, and the usual way in which such dimensions -are marked when ordering parts of machinery. - -Fig. 242 is a pedestal, or metal frame; three views are shown, the -center figure being an elevation, the lower figure is the plan of the -base, the upper figure is a view of the top, on which is bolted the -bearing block, it being on the outside of the center figure. The -essential measurements are marked by letters. _H_ is the vertical height -from base to the seat of bearing block: _L_ being the length, and _W_ -the width of the base; _P_ is the length between checks, and _B_ the -width of seat for bearing block; _C_ is the distance from center to -center of the holding down bolt holes, and _T_ is the depth of the holes -in the base; _K_ is the distance from center to center of the bolt holes -in the top for bearing block. - -Fig. 243 is a hanger, or metal bracket, and shows the center figure or -elevation, the plan of the top and the plan of the seat for bearing -block, which is bolted on the interior of the center figure. _H_ is the -vertical distance from the top to the seat for bearing block; the other -measurements required are marked by letters similar to figure 242. - -Now, one of the important matters in connection with dimensioning a -drawing is the location of the figures. One rule, whose utility cannot -be gainsaid, is that they should be so located that they can be altered -or erased without damage to the lines of the drawing, as changes may be -necessitated either by original errors in writing down the figures or by -changes in the design being found desirable during the construction of -the machine. - -[Illustration: Fig. 243.--Fig. 244.] - - - - -Shading Drawings. - - -To produce an effect, drawings are shaded; that is, shadow lines about -twice the width of the regular line are drawn according to a recognized -rule, which always represents the same peculiarity of form in the same -way. - -In working drawings light lines only are permitted; shade lines are -wider than the working lines, and in reading scale measurements the -extra thickness of line would make a difference. - -Instead of representing the shadow as it is really cast by the object, -the edges which cast the shadow are determined, and all the views are -treated as if the light came from behind and from the left, downwards, -at an angle of 45° to the horizontal line, as shown by the arrows in -figs. 245 to 248. - -[Illustration: Fig. 245.--Fig. 246.--Fig. 247.--Fig. 248.] - -The lower and right-hand outlines of projecting parts will cast shadows, -and the student should make them of extra width. - -Fig. 249: In shading curves, divide the center line as before (see page -146) and describe circles from center, _D_; these lines are not to be -shaded in penciling, but when inking. The figures represent two rings, -_A_ and _C_, and spaces, _B_ and _D_. The outside of a surface is shaded -according to circle 1, and the inside surface according to circle 2. -This will give the desired shading, but it makes a drawing incorrect, -and therefore shading is not used in working drawings. - -This shading is accomplished by inking the circle first with regular -width of line; then with the same radius remove the point of compasses -from the _true center_, placing it outside, according to the desired -position of the shaded line, and describe an arc of a circle. - -In fig. 250 divide center line as before; with the 45° triangle or set -square, draw through the center the diagonals shown by dotted lines; and -through the points _A_, _B_, _C_, etc., draw the perpendiculars, cutting -the diagonals; from the points of intersection draw the horizontal -lines, completing the squares. - -[Illustration: Fig. 249.] - -[Illustration: Fig. 250.] - -Now, take a radius of half an inch, and in the corner of each square -draw with the bow-pencil a circular arc meeting the pencil lines -exactly; with the bow-pen _ink in the arcs_ first, then ink carefully -the lines joining with the arcs; all lines must be of the same width; -put in the shade on arcs and lines as in fig. 249; and, finally, erase -the pencil lines at corners, etc. - - - - -Section-Lining. - - -Cross-hatching has been defined in the “preliminary definitions” to -drawing; this term represents the practice of drawing diagonal lines -representing the interior of an object, shown as a piece cut in half or -when a piece is broken away. This is done to make more of the parts -show, or to exhibit more clearly the nature of the materials; hence -section lining and cross-hatching tell the same thing, _i. e._, the -drawing of diagonal lines, usually at an angle of 45°, to show that the -object is broken away and the interior designed to be represented. - -[Illustration: Cast iron. - -Fig. 251.] - -[Illustration: Wrought iron. - -Fig. 252.] - -[Illustration: Steel. - -Fig. 253.] - -[Illustration: Composition. - -Fig. 254.] - -[Illustration: Vulcanite. - -Fig. 255.] - -[Illustration: Wood. - -Fig. 256.] - -[Illustration: Leather. - -Fig. 257.] - -[Illustration: Brick. - -Fig. 258.] - -[Illustration: Fig. 259.] - -Figs. 251 to 258, inclusive, show the section lining and cross-hatching -by which it is customary to represent the various materials entering -into a construction. - -In fig. 259 is outlined a representation of a section of a cog-wheel; -section 1 being the wood cogs; 2, the iron wheel, and 3 the wedges at -the root of the gear. It would be impossible to convey the same ideas by -ordinary plan or elevation drawing; all the objects on the same page are -more clearly represented by the use of section lines or cross-hatching. - -Sectioning is executed by drawing a series of parallel lines about ³⁄₃₂ -inches apart. Lay the 45° triangle on the upper edge of the T-square and -draw the top-most line of the sectioning. Then slide the triangle along -the T-square for each successive line. The sectioning should be inked in -without previous penciling and the lines should be finer than the lines -of the general drawing. - -Various devices are in use for mechanically equalizing the distances in -section lining, but the trained eye is the most practical method. When -two abutting pieces are sectioned, the section lining on one piece -slants in an opposite direction to that on the other. - -To draw an object to be sectioned on both sides of its center line, only -one side is sectioned, while the other side is drawn in full. - -Sections are necessary in nearly all machine drawings; they are usually -taken horizontally or vertically, but they may be taken in any -direction; the position of a section should be shown by a line upon the -object; this line is called the cutting plane. - -In fig. 261 is shown the hub of a wheel, it is also a sample of work for -practice. - -[Illustration: Fig. 260.] - -[Illustration: Fig. 261.] - -Fig. 260 shows the mode of representing two different materials in one -plane, or a section may be represented by the darker portion, and the -lighter shaded portion being a surface resting on the section. - -Fig. 261 shows the section of a shaft surrounded by the surface of a -wheel. - - -TINTS AND COLORS. - -For special purposes of illustration drawings are made which must be -tinted. In such cases the paper must be expanded and stretched evenly -all over its surface; otherwise when the moist tint is applied the paper -will wrinkle and get out of shape; to do this cut the paper at least -half an inch less in size than the drawing board; lay the paper face -down, turn up a margin or edge of about three-fourths of an inch all -round, then dampen the paper with a sponge and clean water; allow it to -soak for a few minutes until it is evenly dampened or moistened all -over, turn the paper upside down (face up). - -Apply strong paste to the under side of the margin all round; rub down, -on the drawing-board, working from the center of the board outwards so -as to exclude the air and prevent creases or furrows. The board is then -inclined and left to dry slowly; make sure that the paper is all well -pasted and every part of the edges attached to the board. - -If tracings are required to be tinted or shaded, the color may be -applied before the tracing is cut off, or what is more usual, the color -may be applied on the back of the tracing; then there is no liability to -wash out the lines. - -Mechanical drawings are seldom tinted, but are mainly produced in India -ink. Where, however, a fine effect is desired, working drawings are -colored, so as to show at a glance the material of which the different -parts are to be made. - -The colors required are few but should be of the best quality. Besides -India ink the following water-colors are generally used: - -1, Neutral-tint. 2, Prussian Blue. 3, Chrome Yellow. 4, Gamboge. 5, Raw -Sienna. 6, Carmine. 7, Vermillion. 8, Venetian Red. 9, Sepia. 10, -Indigo. These come in hard cakes. - -Certain colors and tints represent different metals and materials as -follows: - -Wrought Iron--Prussian Blue. - -Steel--Carmine and Prussian Blue, mixed to give a purple shade. - -Steel Casting--Same as the above darkened by Venetian Red. - -Cast-Iron--Neutral Tint made of India Ink, indigo, mixed with a little -carmine. - -Brass--Gamboge or Chrome Yellow. - -Babbitt--Emerald Green; sometimes light mixture of India Ink. - -Copper--Purple Lake. - -It is sometimes found necessary to prepare a highly finished and shaded -drawing of the work in hand. Such elaborations, in fact, are much -admired by the uninitiated, although the complete shading of the drawing -is no criterion as to the scientific value of the machine. An -illustration of this is told in the note. - - NOTE.--A consulting engineer had to lay before a board of directors - plans of horizontal engines for their consideration. One of these - drawings was of a very superior machine, but being only depicted - lineally was at once rejected by them, for a highly finished - representation of a very inferior apparatus. The engineer, wishing to - induce the board to decide for the best, suggested that the matter - should be postponed to a future day, and in the meantime had the - drawing of the superior machine highly colored and finished. At the - next meeting the directors unanimously decided that this was the very - one which they preferred and had chosen. - - - - -Reproducing Drawings. - - -When once finished, one or more copies of drawings are frequently -required; these are produced, 1, by blue printing, as described before; -2, by tracing. A tracing is a mechanical copy of a design or drawing, -made by reproducing its lines as seen through a transparent medium--as -tracing-cloth or tracing-paper. - -Tracing-cloth is a thin linen fabric, coated with size; this is called -_tracing-lines_; _tracing-paper_ is so prepared as to be transparent, so -that it will receive marks either in pencil or with pen and ink. - -Tracing-cloth must be fastened to the board, over the drawing, by pins -or other tacks; moisture or dampness should be carefully avoided and the -drawing done on the smooth side of the cloth. - -When tracing cloth will not take ink readily a small quantity of pounce -may be applied to the surface of the cloth and distributed evenly with a -piece of cotton waste, chamois, or similar material, but the pounce -should be thoroughly removed--by washing--before applying the ink. - -In making tracings the same order is followed as described under the -section “Inking”--to repeat: 1, ink in the small circles and curves; 2, -ink in the larger circles and curves; 3, then all the horizontal lines, -beginning at the top of the drawing and working downward; 4, next ink in -all the vertical lines, commencing at the left and moving back to the -right; 5, draw in the oblique lines; 6, all the center lines red -(carmine), and dimension and reference lines in blue (Prussian blue) or -_vice versa_. The figuring and lettering should always be done with -India ink, thoroughly black. - - -BLUE PRINTING. - -Copies of drawings or parts representing details and measurements are -frequently needed for the office, pattern shop, machine and blacksmith -shop, etc. These copies are best made by printing on sensitized or -specially prepared paper, from tracings drawn on transparent cloth or -paper, as hereabove described. The original design may be guarded with -the utmost care for long preservation, but the blue prints, so called, -are for ready reference and use without much regard to the length of -time they are to be in existence. - -The usual practice is to carefully trace from the drawing on transparent -cloth or paper an exact reproduction of it, filling in all detail -lettering and sizes or figured dimensions. - -This tracing is fixed in a frame similar to a picture frame, with the -side on which the drawing is made next to the glass: 1, place the -sensitized side of the paper (which has been prepared previously) -against the back of the tracing; 2, fix soft padding against the back of -the paper and fasten it up so that both paper and tracing are compressed -firmly against the glass, permitting no creases or air spaces between -them. - -[Illustration: Fig. 262.] - -This should be done in a darkened room; 3, expose for three to six -minutes, according to the intensity of the sun; 4, take the sensitized -paper out of the frame and quickly wash well in clean running cool -water, and the drawing will appear in white lines on blue ground; 5, -hang the print up by one edge so that the water will run off and the -print will soon dry and be ready for use. - - -TEST-PIECES. - -To make good blueprints, being guided only by the appearance of the -exposed edge of sensitized paper, requires considerable experience. Very -often, especially on a cloudy day, the edge looks just about right, but -when taken out of the frame and given a rinsing, it is only to find that -the print looks pale because it should have been allowed to remain -exposed for a longer period. - -Now simply take a small test-piece of the same paper (say about 4 inches -square) and a piece of tracing cloth with several lines on its surface -and lay these small pieces out at the same time the real print is being -exposed, and cover these samples with a piece of glass about 4 inches -square. As a general rule, we can find a place on top of the frame for -the testing-piece, and by having a small dish of water at hand for -testing the print by tearing off a small bit and washing same to note -its appearance, the novice can get just as good results as the -experienced hand without danger of failure. - - -BLACK PROCESS COPYING. - -This is accomplished by specially sensitized paper by which a fac-simile -of the original drawing can be made; that is, black lines upon white -ground. It also avoids the objection to the blue print paper of shaded -drawings which show light and shade reversed. - -The prints made by the process are said to be absolutely permanent and -can be altered, added to or colored the same as original drawings. - -The sensitized paper is sold ready for use, but it can be prepared by -dissolving two ounces of citrate of iron and ammonium in eight ounces of -soft water; keep in a dark bottle, also, one and one-third ounces of red -prussiate of potash in eight ounces of water; keep in another dark -bottle; when about to use mix an equal quantity of each in a cup and -apply in a dark room with a soft brush or sponge to one side of white -rag paper, similar to envelope paper, let it dry and put away in a dark -place until required for use. - - -[Illustration: DRAWING OFFICE RULES] - - - - -Drawing Office Rules.[1] - - - [1] NOTE.--A. W. Robinson, M.E., Montreal, must have all credit for - these admirable rules and regulations. They bring into a single focus - the whole science and art of mechanical drawing. - - There are drawing offices where from ten to nearly one hundred people - are busily employed in making new plans and sketches by the hundreds, - and where thousands of completed drawings are filed for reference or - for changes, as these are needed in the shop management. - - To be introduced for the first time into such a company is a trial for - the “new man” both of nerve and manners, and a test as well of skill; - nothing helps more at such a time than an acquaintance with the rules - and routine of the office, for the old saying holds good in a drawing - office, of “doing in Rome as the Romans do.” The author of this book - has felt this strangeness in a new position and so adds the following - model-rules for the guidance of the student when first entering a - regular position in an office where many are employed and where - success depends upon a systematic ordering of the work in hand. - - -SIZE OF DRAWINGS. - -1. The standard size shall be 23 inches by 36 inches, subdivided into -half, quarter and eighth sheets. - -2. Full-size drawings shall be reserved, as far as possible, for general -views and parts not capable of being shown on smaller sheets. - -3. All shop detail shall, as far as possible, be shown on quarter and -eighth sheets. - - -CHARACTER OF DRAWINGS. - -4. Detail drawings shall, as far as possible, classify the different -kinds of works, such as castings, forgings, shafts, levers, piping, etc. -Different kinds of work shall not be shown on the same detail drawing. - -5. All shop drawings liable to repetition shall be traced and -blue-printed. All temporary details, requiring only one copy, may be -made on sketch sheets and press copied. - -6. A shop drawing is to be considered as an order or instruction to the -shop, and not merely as a statement or illustration. For this purpose it -must convey clearly and distinctly all the information necessary to make -the article. - -7. Every dimension necessary to the execution of the work is to be -clearly stated by figures on the drawing, so that no measurements need -to be taken in the shop by scale. All measurements to be given with -reference to the base or starting point from which the work should be -laid out, and also with reference to center lines. - -8. All figured dimensions on drawings to be plain, round vertical -figures, not less than one-eighth inch high, and formed by a line of -uniform width and sufficiently heavy to insure printing well. No thin, -sloping, or doubtful figures, or diagonal-barred fractions will be -tolerated. All figured dimensions below two feet to be expressed in -inches. - -9. All center lines to be alternate dot and dash in fine black line. All -dimension lines to be double dot and dash, with a central space for the -figure, and of such strength as to show on blue-print more faintly than -lines of drawing. Lines of drawing to be bold and clearly defined in -proportion to the scale, and may be shade-lined by making the right-hand -and bottom lines heavier. No ornamental shading or other “frills” -allowed on shop drawings. - -10. Every drawing, whether whole or half-sheet, shall have the title, -date, scale and number of the sheet stamped in lower right-hand corner, -and the quarter and eighth sheets printed on top. - -11. The name of the drawing, as given in the title, is invariably to -consist of two divisions in one line separated by a hyphen. The first -division is to state the general name of the thing or machine, and the -second name is to clearly designate the part or parts represented (or if -a general view should so state). The wording of titles should be -submitted to the chief engineer or head draughtsman for approval. - -12. Each drawing shall bear the name of the draughtsman and examiner, -the surname being used without initials. - -13. Drawings of piping details shall be made in diagram form, using -standard symbols. - -14. All detail parts for standard or repetition work shall be shown -unassembled as far as possible. - - -DRAWING SYMBOLS. - -15. Detail shop drawings should state: - -(a) The pattern number of every casting in plain figures of larger size -than the dimension figures. - -(b) The material of which the parts are made, using symbols as follows: -C.I.--Cast iron. W.I.--Wrought iron. M.S.--Machinery steel. -H.S.--Hammered steel. Bs.--Brass. Bbt.--Babbitt. Bz.--Bronze. -C.R.S.--Cold rolled steel. - -Other materials write full name. - -(c) Finished surfaces will be indicated by “f” written on the line or -surface to be finished. When not so marked it is understood that the -part is to be left black or rough. In cases where finish might be -presumed but not required, follow the figured dimensions by the word -“cast,” if a casting, and “rough,” if a forging. - - -STANDARDS. - -16. The following standards shall be strictly adhered to as given in the -tables noted: - -(1.) Table of standard diameters of shafting and key seats. - -(2.) Table of standard stock sizes of rounds. - -(3.) Table of standard stock sizes of flat steel. - -(4.) Table of standard clearance fits. - -(5.) Table of standard symbols for notation of riveting. - -(6.) Table of standard symbols for pipe fittings. - -Also such other standards as may be adopted from time to time. - - -NUMBERING OF DRAWINGS. - -17. Drawers and filing cases shall be numbered consecutively. Drawers -shall contain 100 sheets each, and filing cases 200 sheets each, and to -be fully indexed. Drawings shall be numbered by a number indicating both -drawer number and serial number in the drawer--thus, 7,604 is the fourth -sheet in drawer 76, etc. - -18. Drawing numbers shall be checked off the index as required, and the -index posted up in uniform handwriting by the clerk. - -19. Standard size drawings shall be kept in drawers and quarter and -eighth sheets in filing cases. All drawings shall be indexed by an index -sheet kept in each drawer or case. - - -CHECKING. - -20. All drawings must be approved before being traced. When tracing is -completed it will be given immediately to the chief draughtsman, who -will have a preliminary print made and carefully checked, before being -used. - - -PATTERNS. - -21. All patterns shall bear the number of the drawing on which they are -first detailed, followed by a serial letter, according to the number of -patterns on the drawing. - -22. Standard patterns used repeatedly and liable to be ordered from in -repairs must not be changed. Other patterns may only be changed when -absolutely necessary and by order. When so changed they will bear the -original number and letter, followed by A for the first change, B for -the second change, and so on thus: 4860 AB is the second change in -pattern 4860 A. - - -SKETCH BOOKS. - -23. Each draughtsman will be supplied with a sketch book by the company, -in which he shall make all his notes, calculations and data referring to -his work, and under no circumstances shall notes of value be made on -loose sheets. Each entry should invariably be commenced with the subject -and date, and full notes made of data on which the calculations were -based, and the results obtained clearly stated. These books are to -remain the property of the company. - - -IN GENERAL. - -24. Changes in drawings, sketches or order lists issued to the shop -shall only be made when authorized by the chief engineer, or, in his -absence, by the chief draughtsman, and when so authorized shall be made -by the order clerk. - -25. The names of all similar parts in order lists and drawings are to be -uniform. - -26. Tracings must be kept in safe, for blue-printing purposes only. -Office copies of blue-prints must be used for references. - -27. No drawing, print or photograph shall be taken from office without -permission. - - -NUMBERING WORKING DRAWINGS. - -There are a great many different systems used in indexing drawings, most -of which have some good points, but very few are sufficiently elastic to -cover a wide field. A plan based upon the decimal system of notation is -very simple, and, as there is no practical limit to the number of -subdivisions, it can be expanded indefinitely. Following are the main -outline features of the system as adapted to the needs of drawing -offices belonging to large works. - -The main division numbers, 000, 100, 200, 300, etc., are used -respectively for all plans and general sheets referring to the division -concerned. 100 includes general plans covering more than one department, -and all small-scale plans with cross references to departments covered. - -The class or tens divisions contain general drawings of the -subdivisions, the subclasses or units divisions being limited to details -only. Further subdivisions would probably be necessary in some cases. A -card index with cross references and written by someone who knew what to -do is an essential part of the system. - - -[Illustration: GEARING AND DESIGN] - -[Illustration: Fig. 263.] - - - - -Gearing. - - - Under this heading the author has grouped some information relating to - a subject of wide interest and one sure to interest a student of - mechanical drawing. - - The diagrams are intended for exercises in drawing, _i. e._, to be - redrawn as parts of practice; the text is to be studied not only for - the good to be gained from the study of gearing, but as an example of - the way in which written or printed descriptions are necessary to - explain a subject illustrated by drawings. - -_A gear_ is primarily a toothed wheel; gearing is a train of toothed -wheels for transmitting motions; there are two chief sorts of toothed -gearing, viz., spur gearing and bevel gearing. - -_A spur wheel_ has teeth around the edge pointing to the center; -commencing at the center, a spur wheel may be said to consist of a hole, -square, octagonal or round, for its axle or shaft; a hub; the web, body -or arms; a rim, and the teeth; see fig. 263. - -_A spur wheel_ has teeth on its circumference which run parallel to its -shaft; wheels as shown in fig. 271 are termed _helical wheels_; these -are similar to spur wheels except their teeth are arranged upon -different angles to the shaft. - -_A bevel_ is a slant or inclination of a surface from a right line, -hence a bevel wheel is one whose teeth stand beveling or at an oblique -angle to the shaft, or towards the center; see fig. 267. - -_Miter wheels_ are bevel wheels of the same size, working at right -angles with one another; see fig. 268. - -_The diameter of both spur and bevel wheels_ is measured and calculated -neither from the outside nor from the bottom of the teeth, but on the -pitch circle. When we speak of the diameter of a spur or bevel wheel, we -mean the diameter of the pitch circle, without any reference to the form -of tooth. - -_The addendum circle_ of a toothed wheel is as shown in illustration, -fig. 264; _addendum_ means “something added,” and, as shown in the -figure, it is the part added beyond the pitch “line” or circle. - -[Illustration: Fig. 264.] - -_The pitch line_ is the most important one in gearing; the “pitch line” -or “pitch circle” is supposed to be the working circle. This is shown in -P--P in fig. 274. - -_The periphery_ of a wheel is the extreme circumference, as N in fig. -274. - -All parts of gear-wheels consist of portions, to which have been given -generally accepted names. Fig. 264 shows the “addendum circle” and the -“pitch line” as marked. The teeth and rim are shown in white, and the -other portions are indicated by the names. - -_The circular pitch line_, as opposed to the diametral pitch, is the -same as the pitch circle. It is a line which bisects all the teeth of a -toothed wheel. - -_The rolling circle_ is the same as the circular pitch line. - -_Diametral_ means pertaining to a diameter or the length of a diameter; -hence a diametral pitch is a system of measures or enumeration based -upon the diameter instead of the circular pitch line; it is used very -generally in spacing for fine tooth gear. Wheels of this description -usually have their teeth cut in a gear-cutting machine, _i. e._, medium -and fine tooth gears. - -[Illustration: Fig. 265.] - -_A cog wheel_ is the general name for any wheel which has a number of -cogs placed around its circumference. - -When the teeth of a wheel are made of the same material and formed of -the same piece as the body of the wheel, they are called _teeth_; when -they are made of wood or some other material and fixed to the -circumference of the wheel, they are called _cogs_; see fig. 265. - -_A pinion_ is a small wheel. When two toothed wheels act upon one -another, the smaller is generally called the pinion. The terms _trundle_ -and _lantern_ are applied to small wheels having cylindrical bars -instead of teeth. The teeth in pinions are sometimes termed _leaves_; in -a trundle, _staves_. See fig. 273. - -The wheel which acts is called a _leader_ or _driver_; and the wheel -which is acted upon by the former is called a _follower_ or the -_driven_. When a screw or _worm_ revolves in the teeth of a wheel, the -latter is termed a _worm wheel_ or _worm gear_; see fig. 270. When a -pinion acts with a rack having teeth, we speak of _rack_ and pinion. -When the teeth are on the inside of the rim, and not on the periphery, -the wheel is termed an _internal gear_; see fig. 272. - -Two wheels acting upon one another in the same plane are called _spur -gear_; the teeth are parallel with the axis. When wheels act at an -angle, they are called _bevel gear_. - -_Friction gear-wheels_ are those which communicate motion one to the -other by the simple contact of their surfaces. - -In frictional gearing the wheels are toothless and one wheel drives the -other by means of the friction between the two surfaces which are -pressed together. - -Grooved friction wheels are used to give greater cohesion than can be -obtained by the plain surface. - -Fig. 263 shows a pair of spur-wheels in gear. The dotted circles which -meet are the rolling circles, called the “pitch line” or “pitch circle.” - -[Illustration: Fig. 266.] - -A spur mortise wheel is similarly shown in fig. 266; it is very like in -appearance to a spur wheel; it differs essentially in that the teeth are -separate cogs, fixed in singly to the rim; see also fig. 265, page 201. - - NOTE.--The teeth of spur wheels cast from a pattern must of necessity - be larger at one side than at the other, because the teeth must have - taper to permit the extraction of the pattern from the mould; - therefore, in fixing wheels to gear, the large side of one should meet - the smaller side of the other; should the two large sides come - together the teeth will meet only at the large side, and the teeth - will probably break away from the excessive strain on that point. - -_Skew gearing_ are bevel wheels working out of center; the teeth do not -form radial lines from the wheel center. - -Fig. 267 shows a pair of bevel wheels in gear as described on page 199. -A bevel mortise wheel, _i. e._, one having cogs inserted in its rim -instead of teeth. - -[Illustration: Fig. 267.] - -A bevel wheel and pinion must be made to suit one another by both having -teeth forming together an angle of 90°, therefore they are pairs, or -proportioned in the number of teeth one to the other. Any other -proportion used would not exactly gear and would be termed a “bastard” -gear. - -[Illustration: Fig. 268.] - -Fig. 268 represents a pair of miter wheels in gear; it will be noted -that the shafts, when connected, will be at right angles to each other, -the wheels being in all particulars of the same dimensions; the figure -answers the purpose of a much longer description, if given in words. - -A miter-wheel can easily be known by putting a square upon the face of -the teeth, which are always at an angle of 45° with one another, -irrespective of size. - -_A miter-wheel_ is a particular kind of bevel-wheel, the bevel being -limited to an angle of 45° in each wheel. - -The curve of the teeth in bevel-gears, when correctly formed, changes -constantly from one end of the tooth to the other, therefore bevel-gears -whose teeth are produced with a forced cutter are not theoretically -correct. - -Fig. 269 represents a rack and pinion: the teeth in this form of gear -are shaped similarly to those in the spur wheel, shown on page 198, with -the difference that the teeth of one are on a circle and on the rack are -made on a straight line. - -[Illustration: Fig. 269.] - -A flange or addition to the end of a tooth and the rim connecting them -together is used to strengthen the teeth. This extends from the root to -pitch line when the wheel and pinion are both flanged: if only one is -flanged it extends from the root to the addendum. - -[Illustration: Fig. 270.] - -Fig. 270 illustrates a worm and a worm wheel, sometimes called screw -gears. This is a slow but powerful method of transmitting power, one -revolution of the worm only moving the wheel the distance of one tooth -and space. - -_A worm gear_ is a spur wheel with teeth at an angle to the axis, so as -to work with a worm which is a _screw_, or has teeth shaped in the form -of a spiral wound round its circumference; the screw or worm is called -an endless screw, because it never comes to a stopping place in the -circumference of the wheel. - -[Illustration: Fig. 271.] - -Fig. 271 represents a gear with helical teeth. It is similar to a spur -wheel, and is used in place of same in heavy and slow moving machinery, -the formation of teeth preventing--in large measure--the jar or -concussion noticeable in common spur gears. - -In recent years the speed at which gearing is run has been greatly -increased. A striking instance is that of a pair of _cast-iron_ helical -wheels, 6 ft. 3 in. diameter, 12 in. wide, making 220 revolutions per -minute, the speed of the pitch line being 4,319 feet per minute; these -wheels are running continuously and with little noise. There is also a -_cut_ gear in a mill in Massachusetts, 30 feet in diameter, and the -speed of pitch line is 4,670 feet per minute. - -[Illustration: Fig. 272.] - -_An internal or annular gear wheel_ is one in which the faces of the -teeth are within and the flank without the pitch circle, hence the -pinion operates within the wheel. See fig. 272. - -In internal geared wheels there is almost an entire absence of friction -and consequent wear of the teeth, as compared to ordinary spur gearing. - -Fig. 273 shows a _crown-wheel_ which has pin teeth which are fixed by -one end only, on its side face and gear into a trundle wheel. - -[Illustration: Fig. 273.] - -_A trundle wheel_ has no teeth, properly speaking. Instead of teeth, it -has pins as shown on illustration, fig. 273, arranged like the rungs of -a ladder between two walls. See page 201. - -_Trains of Gears._--When two wheels mesh--that is, engage with each -other--as in fig. 263, one axle revolves in the opposite direction to -the other; but when internal gears mesh as shown in fig. 272, the shafts -revolve in the same direction; three or more gears running together are -often called _a train of gears_. - -Maximum speed of gears under favorable conditions for safety is -comparatively-- - - Ordinary cast-iron wheels, 1,800 feet per minute. - Helical cast-iron wheels, 2,400 feet per minute. - Mortise wood cog wheels, 2,400 feet per minute. - Ordinary cast-steel wheels, 2,600 feet per minute. - Helical cast-steel wheels, 3,000 feet per minute. - Cast-iron machine cut wheels, 3,000 feet per minute. - -It is not, however, advisable to run gears at their maximum speeds, as -great noise and vibration are caused. - - - - -Designing Gears. - - - This section is introduced into the work for a double purpose; 1, as - an exercise in drawing; 2, as a study in accurate measurements. It is - a sample of the work that the advanced student in mechanical drawing - will be confronted with as he puts in practice the theory of the art - of drawing. - - Some sample rules are given in the following pages to aid in - calculations relating to gears, and still others are given under the - section “Useful Rules and Tables” at the end of the volume; these are - to be carefully studied. - -To accurately divide the pitch circle of a gear wheel by hand requires -both patience and skill. On the accuracy of spacing lies the essential -requisite of a good gear wheel. - -The drawing in plate, fig. 274, illustrates a pair of spur wheels, shown -in gear, the office instructions for which being: - -“Required, _a detail plan_ of a pair of spur wheels; dimensions: wheel, -76 teeth, 3¹⁄₂ inches pitch, 7-inch eye, 6 arms; pinion, 19 teeth; -scale, 1¹⁄₂ inches = 1 foot.” - -The drawing, as illustrated, is the result of the above instructions, -all pencil lines being removed, and this result is worked out as -follows: - -76 teeth × 3¹⁄₂ inches, pitch = 266 inches in circum. = 7 ft. 0¹¹⁄₁₆ in. -diam. = 3 ft. 6¹¹⁄₃₂ in. radius; with this measurement as represented on -scale, draw line _P P_ on drawing. This is called the pitch line. - -Draw next diameter line, produce or extend this diameter line for -pinion, and with radius of 10¹⁹⁄₃₂ (19 teeth × 3¹⁄₂) from pitch line of -wheel, draw pitch line of pinion. - -Take any point in this pitch line of wheel, mark off 3¹⁄₂ inches as -represented on scale, mark this around the pitch line, it will be the -center of each of the 76 teeth; then the breadth of thickness of each -tooth (= pitch × 0.475) must be marked from these centers, then mark -from _P L_, length of tooth to point (= pitch × 0.35) and _P L_ to root -(= pitch × 0.4), draw circles for outside of teeth _N_ and root of tooth -_O_; now with compass set to the pitch (3¹⁄₂) of the wheel, draw the -outer portion from pitch line of tooth. - -The radius will center in the pitch line of next tooth where thickness -of tooth has been marked; after finishing outer portion of both sides of -teeth, set the compass from _center_ of tooth with radius to the -thickness marked on pitch line and draw the portion of tooth from pitch -line to root. - -Now mark off with dividers and draw thickness of rim (= pitch × 0.5), -divide this line into six parts, draw radii for centers of arms; draw -the bore hole 7″ and the thickness of metal for hub same as pitch. - -On radii lines of arms, draw the breadth of arm at rim (= pitch and -thickness of tooth), increase in breadth approaching the center (1″ per -foot), draw the thickness of feather of arm (= pitch × 0.35); draw web -on inside of rim (= pitch × 0.375); fill in arcs for the joining of arms -in rim and hub (radii = pitch × 0.8) and feather to rim and hub (radii = -pitch × 0.37). - -Proceed in similar manner, completing the teeth of pinion, and when -pencil lines are all in, ink the drawing, erasing all needless lines. - -_P P_ shows the pitch line; _B_, thickness of tooth; _c_, breadth of -space; _A_, the pitch; _E_, clearance at root; _N_, the addendum of -tooth; _O_, the root of tooth; _H_, length of tooth from pitch line to -point; _I_, length of tooth pitch line to root; _G_, whole length of -tooth; _F_, thickness of rim; _J_, web or feather on rim; _K_, breadth -of arm; _L_, thickness of feather; _M_, hub, or thickness round the eye. - - NOTE.--It must be remembered that no fixed standard has ever been - agreed upon for these proportions, and workshops differ considerably - in practice. - -[Illustration: Fig. 274.] - -The number of teeth, their proportions, pitch and diameter of pitch -circle are frequently determined on the “Manchester” principle. This -system originated in Manchester (Eng.), and is now generally used in the -United States for determining diameters and number of teeth, which, of -course, regulate speeds. The principle is not applicable to large -wheels, but is limited in its application to small wheels, or wheels -having “fine pitch,” as will be seen in the following explanation, which -is introduced as very useful and indispensable knowledge for the -acquisition of the student in mechanical drawing. - -[Illustration: Fig. 275.] - -The “pitch” of teeth has already been stated to be the distance from -center of one tooth to the center of another on the “pitch line,” -measured on the chord of the arc. In determining the number of teeth or -pitch of wheels on this principle, the pitch is reckoned on the -_diameter_ of the wheel, _in place of the circumference_, and -distinguished as wheels of “4 pitch,” “6 pitch,” “8 pitch,” etc. In -other words, this means that there are four, six, or eight teeth in the -circumference of the wheel for every inch of diameter. - -In designing gears to transmit power the stress on a tooth is -calculated; it determines the breadth or width and also the thickness of -the tooth on pitch line; the space between the teeth is in proportion to -the thickness of tooth, and the thickness of both combined (one tooth -and one space), measured on the pitch line or circle, is the pitch of -the wheel. - -From the pitch all the proportions and measurements for the sizes and -strength of the parts of the wheel are taken _by rule_, and a -symmetrical form is produced. - -In machine drawing the practice is to represent wheels by circles only; -the teeth are never shown except on enlarged details and then only in -very rare instances; the circles drawn are always the _pitch lines_ or -the rolling points of contact of the wheels. - -The addendum circle is seldom if ever used in practical drawing. Should -it be necessary to show it in an exceptional case, the circle would be -represented by “dotted” line. - -The shape of tooth and mode of constructing it, as practiced in drawing -offices, differs from the true theoretical curve of the tooth, although -very minutely. - -In all calculations for the speed of toothed gears the estimates are -based upon the pitch line, the latter standing in the same place as the -circumference of a pulley. - -To find the _diameter of a gear-wheel_ multiply the number of teeth by -the pitch, divide by 3.1416. - -To find the _pitch of a gear-wheel_ multiply the diameter by 3.1416 and -divide by the number of teeth. - -To find the _number of teeth in a gear-wheel_ multiply the diameter by -3.1416 and divide by the pitch. - -The _breadth of wheels_, where practicable, should be at least three -times the pitch. - -[Illustration: Fig. 276.] - -Fig. 276 shows a scale for proportions of teeth; it is divided into -tenths and used thus: - -Say wheel is 2″ pitch, then from pitch circle to addendum will be 3¹⁄₂ -tenths, and from pitch circle to root of tooth will be 4 tenths measured -at the 2″ line on scale, and so on. - -The decimal proportions already given in example, page 210, are adopted -in many workshops. Many others use the proportions approved of by Sir -William Fairbairn, which are: - -Table of proportion of gears: - - Depth of tooth above pitch line .35 of the pitch. - Depth of tooth below pitch line .40 of the pitch. - Working depth of tooth .70 of the pitch. - Total depth of tooth .75 of the pitch. - Clearance at root .05 of the pitch. - Thickness of tooth .45 of the pitch. - Width of space .55 of the pitch. - -The diameter of a wheel or pinion is invariably the diameter measured on -pitch circle, except it is specially described otherwise, thus the -diameter “over all,” etc. - -The shape of the curved face of the teeth of gears extending from the -root to the addendum is the curve conforming to the passage of the teeth -described on its fellow entering and leaving, as they rotate or roll -together on their pitch circles. - -The curve of teeth outside the pitch circle is called “the face,” and -the curve from pitch circle to root is called “the flank.” - -The difference between the width of a space and the thickness of a tooth -is called clearance or side clearance. - -The play or movement permitted by clearance is called the backlash; -clearance is necessary to prevent the teeth of one wheel becoming locked -in the spaces of the other. - -Wheels are in gear or geared together when their pitch lines engage, _i. -e._, when the pitch circles meet. - -Wheels to be geared together must have their teeth spaced the same -distance apart, or in other words, of the same pitch. - -The teeth of spur wheels are arranged on its periphery parallel to the -wheel axis, or shaft on which it is hung. - -The teeth of a bevel wheel or bevel gears are always arranged at an -angle to the shaft. - -When the _teeth_ of bevel gears form an angle of 45° they are called -miter wheels. - -Miter wheels to gear must be of equal sizes. - -A crown wheel is a disc that has teeth which are on its side face; that -is, teeth on a flat circular surface all parallel to the axis of the -wheel. - -A rack has teeth on a flat surface or plane all parallel to one another. - -A gear cut by machine is called a _cut gear_. It has teeth with less -clearance than cast wheels, which are not so true or perfect, and -therefore require more clearance. - -A worm with even a light load is liable to heat and cut if run at over -300 feet of rubbing surface travel. The wheel teeth will keep cool, as -they form part of a large radiating surface; the worm itself is so small -that its heat is dissipated slowly. - -A worm throws a severe end thrust or strain on its shaft. - -_Steel Gears._--There is great economy in the use of cast-steel over -cast-iron in gears; the average life of the former is nearly twice as -great as of cast-iron gears. And, apart from their longer life and -efficiency, there is less danger of breaking. - -The most accurate teeth, strongest and most uniform in wearing, are to -be found in steel gears cut from solid stock, or made by cutters of -proper shape. - -Fig. 275 shows an elevation and a vertical section of a spur wheel. From -these views the various parts in spur gears can be better understood, as -they are represented here in combination, and the wheel in its entirety. - -_AA_ is the horizontal center line, _BB_, _BB_ the vertical center -lines, _II_ and _II_ the pitch lines, _N_ thickness of tooth, _O_ space -of tooth, _D_ total depth of tooth, _C_ breadth of face, _F_ diameter on -pitch line, _P_ diameter over all, _G_ diameter of hub, _E_ diameter of -hole, _H_ depth of hole, _L_ thickness of rim, _M_ thickness of web. - -Much has been and still is being written on gearing. No general rule is -followed by the writers; the elementary principles given will enable the -student to master spur gearing, and bevel and combinations of many kinds -of wheels will afterwards be found easier to delineate than the numerous -lines seem to indicate. - - -[Illustration: WORKING DRAWINGS] - -[Illustration: Fig. 277.] - - - - -Working Drawings. - - - From the “plans” made in the office are produced “working - drawings”--which represent in detail the work to be done to exact - measurement and of material, as indicated, by the pattern-maker, the - foundry, the forge, the shop, and finally, by the erector of the - completed mechanism. - - How to satisfactorily fulfill the directions contained in these - drawings, representing only a part of the work, so that it will fit, - with needed accuracy, to all other parts of the design, is the task - before each separate worker. - -It is by means of this division of the process of manufacture through -these drawings, that scores and hundreds of men can be employed at the -same time upon a single engine or machine; thus, while handwork has been -superseded by machines in many quarters, the art of drawing has not been -narrowed nor diminished, for no drawings or designs have yet been made -by machinery, nor are they likely to be. - -It is thus that a good designer and draughtsman “projects” or extends -himself, to the advantage of many fellow workers. - -The drawing, fig. 277, shows a simple form of pillar crane: it consists -of an upright cast-iron pillar, which is bolted on a cap stone, under -which is the foundation plate not shown in the drawing; the boom is of -rolled steel, supported by steel tie rods, and provided with rollers at -the base; the hoisting gear is shown in broken lines and circles; all as -seen in the drawing. - -[Illustration: Fig. 278.--Fig. 279.] - -[Illustration: Fig. 280.] - -Figs. 278, 279 and 280 show a drawing of a “hydraulic beam bending -machine” in three views; fig. 280 is a plan, fig. 278 is an end -elevation, and fig. 279 a side elevation, and a portion of the latter in -section shows the interior construction. - - NOTE.--These three views are a practical illustration of drawings for - a machine of the following dimensions: this machine has a bed 3 × 5 - feet in area, with 27 holes in each side for the bending pins. The - frame and cylinders are made of cast iron, the rams of machinery - steel, and the slides for holding the bending blocks, of steel - casting. The distance between the bending blocks is 17 inches. The - cylinders are copper lined, 8 inches diameter, and the rams have a - 6-inch stroke. The rams, which are independent and single acting, are - returned by counterweights placed as shown under the table. The - cylinders can be operated independently from either side of the - machine by an arrangement of valves and levers. The machine complete - weighs about 7,500 lbs. - -[Illustration: Fig. 281.--Fig. 282.--Fig. 283.] - -The drawing, page 222, shows three views of a power punching press. - -Fig. 282 is a side elevation. - -Fig. 283 a front elevation. - -Fig. 281 a vertical sectional view; from these views the proportion, -general arrangement and disposition of the automatic devices can be -easily understood; it may be well to call particular attention to the -automatic clutch on the top shaft and the tripping device. - -[Illustration: Fig. 284.] - -This drawing, fig. 284, shows a side elevation in section of a -self-adjusting piston-rod packing. - -_A_ is the gland, _B_ is the piston rod, _C_ is a brass sleeve which -contains the packing _D_, _E_ is the cylinder cover, _F_ is a coil -spring. It will be seen that the spring _F_ abuts on a bushing in the -bottom of the stuffing box and is prevented from scoring the piston rod -by stepping over the ends of the bushing and follower. All as shown in -the drawing. - -The drawing, fig. 285, shows a sectional view of a large pulley fixed on -a “quill,” or hollow shaft: the driving shaft passes through the hollow -shaft and is attached to the friction clutch shown at the right-hand -end; this friction clutch drives the hollow shaft and pulley. - -[Illustration: Fig. 285.] - - Fig. 286 shows the mechanism, called the link-motion, employed to - reverse an engine, or to enable it to be run in either direction. Many - forms of link-motion have been devised, but the Stephenson form, as - shown in the figure, is, however, the one in almost universal use. - -[Illustration: Fig. 286. - -This drawing shows shading and the mode of figuring the parts for -identification.] - -[Illustration: Fig. 287.--Fig. 288.--Fig. 289.] - -Figs. 287 to 289 represent a bumping-post for the end of railway tracks, -reproduced on an enlarged scale from the columns of the _Engineering -News_. - -In addition to the lettering and dimensions, admirably shown in the -drawings, the following description is appended to show how printed text -and mechanical drawings mutually aid in practical--or commercial--usage. - -The unique feature of the arrangement shown, is that the center line of -the post does not coincide with the track, thus adapting itself to the -nature of the blows of a car-bumper, as received in the single-post -style of the mechanism. - - -BUMPING POST FOR RAILWAY TRACKS. - -The post is a 15-in. steel I-beam, resting on a base plate ³⁄₄-in. -thick, and supported by anchor rods 1³⁄₄ ins. diameter, with upset ends -held by nuts on a heavy forging bolted to the top of the post. These -rods extend forward and outward to clear the rails, and then pass -vertically through a 4 × 6-in. angle iron crosstie, and an ordinary -wooden tie, extending down to an anchor block or deadman buried in the -ground 6¹⁄₂ ft. below the top of the rail. - -Vertical braces or spreaders are fitted between the anchor timber and a -longitudinal timber under the ties, so as to prevent the loosening of -the anchor rods when the post is struck. The rods are held in position -against the rails by steel forgings bolted to the rail with 1-in. turned -bolts. An oak striking block, 12 × 12 ins., 3 ft. long, is bolted -between angle iron brackets on the face of the post. - -[Illustration: Fig. 290. - -Front View. - -Fig. 291. - -Side View. - -Scale, 3 in. = 1 ft.] - - - - -To Read Working Drawings. - - - One of the advantages resulting from a knowledge of practical - draughting is, that it enables a mechanic to _read_ a drawing when - given him as a guide for his work. It is getting every day more - general among draughtsmen to figure exactly and minutely every part of - their drawings which are made to a scale. - -Drawings are almost always made “finished size,” that is, the dimensions -are for the work when it is completed. Consequently all the figures -written on the different parts indicate the exact size of the work when -finished, without any regard to the size of the drawing itself, which -may be made to any reduced and convenient scale. - -Even in full size drawings this system of figuring is not objectionable. -It is a system which should be followed whenever a drawing is made “to -work to,” for it allows the workman to comprehend at a glance the size -of his work and the pieces he has to get made. Figuring makes a drawing -comprehensible even to those who cannot make drawings. - -A working drawing should be made, primarily, as plain as possible by the -draughtsman; second, the workman should patiently and carefully study -it, so that it is thoroughly understood. - -In studying a drawing, the object it is intended to represent should be -made as familiar as possible to the mind of the student, so that he may -fill out in imagination the parts designedly left incomplete--as in a -gear wheel where only two or three teeth are drawn in, that he may see, -mentally, the whole. - -The following is a description of reading drawings when dimensions are -not figured. Here we have a piece of machinery represented by fig. 290, -and the information we have is that it is to scale, three inches = one -foot. Now, with scale and dividers, we can arrive at its actual -dimensions. - -Measurements should be first taken _with the dividers from the drawing_, -and then the dividers applied to the scale to which the drawing is made; -this scale is always marked on the working drawing; if the dividers are -set to the length of the base of the example, fig. 290, they will -measure, on an ordinary two-foot rule, three and three-fourths inches, -_but if applied to the three-inch scale they will read_ one foot three -inches, the actual length of the part; the “reading” is from the scale; -thus, in both figures the drawings are “three-inch scale.” - -Now, 3 inches is one-fourth of a foot, hence 3³⁄₄ × 4 = 1 ft. 3 in., the -full size, and so on for all parts of the drawing. - -Fig. 291 shows _a side view_ of the “steady rest,” illustrated in front -elevation, fig. 290; from the scale as before we get the sizes; the two -views combined give length, breadth and thickness of the parts. - -In some figures it is necessary to show end views, also section views, -to enable all measurements to be read from the drawing. - - -[Illustration: PATENT OFFICE DRAWINGS] - - - - -Patent Office Drawing Rules. - - -U. S. PATENT OFFICE RULES. - -AS APPLIED TO PREPARATION OF DRAWINGS. - -Each applicant for a patent is required by law to furnish a drawing of -his invention whenever the nature of the case admits of it. The drawing -must be signed by the inventor or the name of the inventor may be signed -on the drawing by his attorney-in-fact, and in either case must be -attested by two witnesses. The drawing must show every feature of the -invention covered by the claims. - -When the invention consists of an improvement on an old machine, the -drawing must exhibit, in one or more views, the invention proper, -disconnected from the old structure, and also, in another view, so much -only of the old structure as will clearly show the connection of the -invention with the old machine. - -Several editions of the patent-drawings are printed, the smallest of -which is about 3 × 4³⁄₄ inches, so that the drawing must be so made that -it will stand a reduction of about one-fourth. This work is done by the -photo-lithographic process, and therefore the character of the original -drawing must be brought as nearly as possible to a uniform standard of -excellence suited to the requirements of the process. - - NOTE.--These rules will be found most useful to many readers of this - work--hence their introduction at this point. Nearly 50,000 patents - are “applied for” in the United States every year. - -The following rules are given by the Patent Office for guidance: - -1. Drawings must be made upon pure white paper of a thickness -corresponding to three-sheet Bristol board. The surface of the paper -must be calendered and smooth. India ink alone must be used, so as to -secure perfectly black and solid lines. - -2. The size of a sheet on which a drawing is made must be exactly 10 × -15 inches. One inch from its edges a single marginal line is to be -drawn, leaving the “sight” precisely 8 × 13 inches. Within this margin -all work and signatures must be included. One of the shorter sides of -the sheet is regarded as its top, and measuring downwardly from the -marginal line, a space of not less than 1¹⁄₄ inches is to be left blank -for the heading of title, name, number and date. - -3. All drawings must be made with the pen only. Every line and letter, -signature included, must be absolutely black. This direction applies to -all lines, however fine, to shading, and to lines representing cut -surfaces in sectional views. All lines must be clean, sharp, and solid, -and they must not be too fine or crowded. Surface shading, when used, -should be open. Sectional shading should be made by oblique parallel -lines about ¹⁄₂₀ of an inch apart. Solid black should not be used for -sectional or surface shading. - -4. Drawing must be made of the fewest lines possible, consistent with -cleanness. The plane upon which a sectional view is taken should be -indicated by a broken or dotted line. Heavy lines on the shade side of -objects should be used, except where they tend to thicken the work and -obscure letters of reference. The light is always supposed to come from -the upper left hand corner at an angle of 45 degrees. - -5. The scale to which a drawing is made should be large enough to show -the mechanism without crowding. The number of sheets used must never be -more than is absolutely necessary. - -[Illustration: Fig. 292.] - -6. The different views should be consecutively numbered. Letters and -figures of reference must be carefully formed. They should, if possible, -measure at least one-eighth of an inch in height. - -If the same part of an invention appears in more than one view of the -drawing it must always be represented by the same character. - -7. The signature of the inventor is to be placed in the lower right-hand -corner of each sheet, and those of the witnesses at the lower left-hand -corner. - -The title should be written with pencil on the back of the sheet. - -Drawings should be rolled for transmission, never folded. - -On page 235, fig. 292 exhibits a reproduction of a patent office -drawing, used in connection with specification papers in an application -for a United States patent. - - -ENGLISH PRACTICE. - -The rules for patent drawings in England are practically the same as in -the United States; the paper sizes are, however, different. They must be -on sheets of one of the two following sizes (the smaller being -preferable), 13 inches at the sides by 8 inches at the top and bottom, -or 13 inches at the sides by 16 inches at the top and bottom, including -margin, which must be one-half an inch wide. - -If there are more figures than can be shown on one of the smaller-sized -sheets, two or more of these sheets should be used in preference to -employing the large size. When an exceptionally large drawing is -required, it should be “_continued_” on subsequent sheets. There is no -limit to the number of sheets that may be sent in. - - -[Illustration: PRACTICAL POINTS] - -[Illustration: Fig. 293. See page 244.] - - - - -Useful Hints and “Points.” - - - Many of these “points” are repetitions, with but little variation from - the way they have been previously stated; they are thus repeated to - emphasize their practical worth. - -A good draughtsman leaves his work in such a state that any competent -person can without difficulty ink in what he has drawn. - -The criterion of a good set of drawings is that with a properly prepared -specification they are complete in themselves and require no -explanation. - -A “break” in a figure or object in a drawing is shown in rough irregular -lines, as in fig. 134, on page 131; this is useful when the paper is not -large enough to show the whole. - -Never use a sloping line in writing fractions on a drawing. The -objection arises from the fact that such a dimension as 1³⁄₁₆, if -written with the inclined line, unless very distinctly executed, may be -read as ¹³⁄₁₆. - -In inking do not draw the lines further than you wish them to go, but in -penciling it is well to extend the lines, free up. - -Never use a scale for a ruler. - -Do not overload the pen with ink. - -Having filled the pen, nearly close the nibs and try the width of the -line on a piece of paper or the margin of the drawing. - -Never refill or lay the pen aside without first cleaning it. - -The application of the science of geometry to the drawing-board is -absolutely necessary to success, for the reason that the whole fabric of -mechanical drawing rests on the principles of geometry, which is well -termed the science of measurements. - -Section lines should be the last inked and always without previous -penciling. - -Center lines are necessary in working drawings. - -In choosing T-squares, care should be exercised to see that the head -slides up and down the _left_-hand side of the board easily, and that -when pressed against the board with the left hand there is no “slogging” -of the blade up or down, or in other words, that the head is bearing -firmly for its whole length against the board. - -The best place for the title of a drawing is said to be the upper -left-hand corner; this facilitates the filing of the sheet. - -Never use a soft pencil except for finishing in shadow lines. - -The rubber should always be kept clean. - -Great care should be taken to keep drawing boards out of the way of heat -or damp, as these cause the wood to warp. - -Circles and curves are to be “inked in” before straight lines. First ink -the smallest and afterwards the larger curves. - -Do not press heavily on the pencil so as to cut the paper, but draw -lightly, so that the mark can be erased and leave no trace, especially -if the drawing is to be inked. - -The draughtsman should commence his work at the top of the paper, -keeping the lower part covered over until he needs to use it. - -Shade lines should be avoided in all working drawings, as their use -interferes with accurate measurements. - -To make ink stick to the tracing cloth, with a woolen cloth rub some -powdered chalk or pounce over the surface on which the ink lines are to -be drawn, then wipe the surface clean and use a good quality of ink. - -For striking small circles a small bow pen should be used. - -To fix lead pencil marks on sketches so that they cannot be readily -erased, sponge them with milk carefully skimmed, then lay blotting paper -over them and iron with a hot flat-iron. - -To have the ink preserve its fluidity and to keep out all dirt and dust, -keep the cover on the ink slab; the mistake is often made of putting too -liberal a supply of water in ink well, which causes a waste of both time -and ink; no more should be prepared than to meet immediate requirements. - -Always draw on the right side of the sheet, which can be found by -holding the sheet up to the light and looking across its surface with -the eye nearly in the same plane as the paper; note which side is the -smoothest and has the least number of blemishes on it; this is the right -side to draw on. - -As to sharpening pencils, it is always best to cut a chisel point on the -pencil used for drawing, and put a circular point on the pencils in the -bow pencil and pencil leg. The chisel point makes a finer line and lasts -much longer than a round point. - -The varnish used in many large drawing-rooms is simply white shellac -dissolved in alcohol; it requires a little experience to mix these to a -proper consistency, but this is soon acquired. - -Never sharpen your pencil over the drawing. - -A center line of a drawing is the line upon which the figure is to be -constructed; the center line is the first line to be drawn. - -The T-square belongs to the left side of the drawing-board, and is -operated by the left hand. The right hand should be kept free for the -purpose of picking up pencil, pen and bows, adjusting and marking off. -The left hand controls the T-square and the triangle that slides along -the upper edge of the square; the right hand is for the instruments. - -The advantage of a paper rule or scale is that the paper will expand and -contract under varying degrees of atmospheric moisture the same as the -drawing does. - -Avoid rubbing out and constantly cleaning the drawing with India rubber; -if wrong lines are made or it is desired to make alterations, the part -to be changed should be rubbed out and completely re-drawn. - -When using the bows see to it that the steel-pointed leg that is put -down first on the paper, to secure a center for a curve or a circle, is -a trifle longer than the pencil or pen leg. - -To clearly indicate the position of a center which is to be used again, -lightly pencil a small circle about it; never put the point of a pencil -in the center hole to enlarge or blacken it; the prick point made by the -dividers and needle points should be no more than can be just seen, -hence the circle to be made as advised above. - -[Illustration: Fig. 294.] - -Be particular in having the legs of the dividers exactly the same -length, and sharp, so that in pricking off distances, and dimensions, -and centers, the indent or hole made in the paper is as small as -possible. - -The term “plane” means a perfectly flat surface; that is, something -which has length and breadth but no thickness. - -The best way to indicate on the drawing the surfaces which are to be -finished is to write on the lines which represent the finished surfaces -“finished,” tool-finish, or “faced,” according to the degree of finish -required. The single letter _f_ is frequently used. - -Avoid fingering the drawing sheet as much as possible; in pointing to -any part of the drawing use a pencil and not the finger. - -Remember that a drawing is made to be read. - -The skill in inking does not depend on the fineness of the line, but on -its clearness. - -A soft pencil should never be used on a mechanical drawing unless in -rare cases when it is used for pencil shading; the hardness or softness -of pencils is denoted by letters. - -Never ink any portion of a drawing until the penciling is entirely -finished. - -Stretching or pasting the paper to the board is very seldom resorted to, -for the reason that the mechanical drawings are _to scale_ and the paper -is natural when pinned to the board and more correct than if under a -strain. Mechanical drawings are always required in practice _right -away_, and time would be wasted and lost in damping and pasting and -drying again. - -A working drawing, whether made to a scale or not, must have all the -dimensions plainly written upon it, for a workman should never be -compelled to measure a drawing. - -In marking off distances, centers, etc., a fine needle point is useful; -the hole should not be punctured through the paper, merely a prick -point, so that it will leave an impression, which will not be -obliterated by the use of rubber; drawing-pens are often equipped with -such a needle point in the end of the handle, that is visible only when -the pen is unscrewed from the handle; but in the absence of one of this -kind the point of the divider leg will be of use. - -Mechanical construction drawings represent a large amount of mental and -manual work, as well as a considerable cost in money; hence, they are of -value quite as much as property which has been acquired by the -expenditure of either labor or capital. It is wise to keep copies of -original designs and sketches, as well as data and formulæ, for record -and comparison. - -The best system for keeping drawings is to make them of certain standard -sizes, and to keep them flat, unrolled, in drawers, numbered, lettered -and labeled. - -In an office where space is limited and drawings have to be rolled it is -well to use a number of pasteboard cases about three feet long and three -inches in diameter. These are shown in fig. 294. - -A puncture can be made near the top and, when a new drawing or -blue-print is inserted in this cylindrical case, a cardboard tag can be -looped through the puncture. This label will give the title and number -of drawings in that case. - -A manuscript book methodically and neatly kept should tell immediately -the number of the drawing and the case. - -Fig. 293 is good for practice in line drawing and also as an optical -illusion. “You look and are deceived. At first glance you say, ‘Of -course, those two lines are curved.’ You are mistaken. They are exactly -parallel. In order to prove this hold them up edgewise to the eye. It -is, of course, the subsidiary lines which lead the vision astray. It is -a case of first impressions being quite wrong.” - - -[Illustration: LINEAR PERSPECTIVE] - -[Illustration: Fig. 295.] - - - - -Linear Perspective. - - -It should be mentioned that this subject is outside the limits of -mechanical drawing, which only deals with objects that can be measured, -projected or dimensioned to an accurate scale. - -But, in rounding out the more formal subjects it is well to look a -little outside the rigid lines of mechanics into the methods of nature, -for no system of teaching drawing is complete that does not include some -explanations for sketching from nature--the objects being always around -the student, the eye always clear to see and the hand only needing the -training to make permanent the impressions received. - -The word perspective means to _see through_; the word perspective being -derived from the Latin word _perspicere_, to look through, hence, -perspective is a science which teaches us to _see_ correctly and enables -us to represent the _appearance_ of anything we may wish to draw; care -should be taken in perspective drawing, to select objects interesting in -themselves, and the best specimens of their class, so as to cultivate -taste, while they at the same time afford useful and instructive drawing -lessons. - -The meaning of the term linear perspective is a line view; the previous -examples have been composed of surfaces placed fronting the eye; -perspective is the science which treats of the changes of form produced -by viewing them in various oblique positions. - -The slightest alteration of _position_ will change the _appearance_ of -an object; this can be easily shown--for illustration take a coin, the -actual shape of which is a perfect round; or, strictly speaking, a -circle. If we take the coin between the thumb and the first finger, -holding it in an upright position, and exactly facing the eyes, as in -Fig. 296, it appears of its true form, viz., a circle. If we alter its -position, balancing it upon the thumb, in a level position, with its -edge directly opposite the eye, as in Fig. 297, its appearance is -changed, and what we know to be really a circle, appears to us as a -straight line. - -[Illustration: Fig. 296.--Fig. 297.--Fig. 298.] - -Now, still balancing the coin upon the thumb, but changing its position -with regard to the eye, by holding it a little lower than in the last -position, that is slightly beneath the level of the eye, as in fig. 298, -we see both the edge and the surface, the coin now appearing neither a -circle nor a straight line, but a curved figure of an elliptical form. -Thus the same coin held in three different positions has assumed three -different shapes. - -Let us take two coins of the same size, holding (in the position shown -at fig. 296) one in each hand. Now, closing one eye, (which will make -the experiment more clear), hold one coin out at arm’s length, and the -other at about the distance of a foot from the eye. On comparing them, -we find that the coin which is further from the eye appears less than -the nearer one. We know that the coins are really equal in size, yet one -appears smaller than the other. - -We thus see that when we change the position of an object, we have as a -consequence a change of appearance; also that the change of appearance -may affect both the shape and the size of the object. - -These diversities of appearance may be remarked in everything around us. -We can observe them in the street by looking at a building from -different points of view, or by comparing the apparent sizes of the -street lamps; in the railway station, by watching the arriving or -departing train; and at sea, by noticing the vessels as they approach, -or as they retire, ultimately vanishing from our sight in that line -where the sea and sky appear to meet. - -All these interesting variations of appearance are in strict accordance -with the laws of =GEOMETRY= and =OPTICS=. The former subject has been -enlarged upon beginning with page 81 of this work, where a line, a -point, an angle, etc., are defined; other terms are explained at page 41 -and the following pages; to these we add a few definitions essential to -the subject. - -=A PLANE= is a surface which is perfectly even and flat; to use a -familiar illustration, a plane is like the surface of a sheet of plate -glass; recollect particularly, that a surface which is at all curved, is -not a plane. - -The =GROUND-PLANE= is the plane on which we stand; the _base-line_ is an -imaginary line passing through the middle of the feet as we stand square -and erect; and the _vertical plane_ is supposed to stand on the -base-line and perpendicular to it. - -[Illustration: Fig. 299.--See page 255.] - -Planes are parallel to each other when they are throughout their entire -surfaces the same distance apart. - -[Illustration: Fig. 300.] - -=THE PERSPECTIVE PLANE= is an upright square of glass, usually framed -like a picture, with a base, so that it can stand up alone. This is -placed between the eye of the spectator and the subject to be drawn, and -as the drawing is sometimes made directly upon it, it is sometimes -called the _Picture_ or the _Plane of the Picture_. - -[Illustration: Fig. 301.] - -=HORIZONTAL= means perfectly level, like the surface of still water. We -must be careful to understand perfectly the difference between the terms -“level” and “even” or “flat.” A surface may be even or flat, without -being level. Thus the wall is even and flat, but it is upright, not -level; level means a fixed, constant position. - -In fig. 301 a house is shown in perspective in which the line _H L_ is -the line of the horizon and _V P_ is the,-- - -=VANISHING POINT.=--The vanishing point is familiarly represented by the -rails on a trolley track on a straight road, which seem to approach each -other in the distance, as shown in fig. 302 at _V P_. - -[Illustration: Fig. 302.] - -_All parallel lines seen in perspective appear to meet in the same -vanishing point._ - -The value of the vanishing point may be seen in the view of a wooden -house, fig. 303, where it (_V P_) gives direction to the retiring lines -of the roof, side planks and door. - -[Illustration: Fig. 303.] - -=POINT OF SIGHT.=--This is that point in the eye where the lines or rays -from the object cross each other, as shown at _P_ in fig. 305, also in -fig. 299 at _S_. - -=VERTICAL= means perfectly upright. If we attach a piece of thread to a -weight, a small piece of lead for example, and hold the thread with the -lead hanging downwards, the thread will fall in an upright or vertical -position. - -=PARALLEL= lines are said to be parallel to each other when they are -throughout their whole lengths the same distance apart. - -=PERPENDICULAR.= When one straight line, meeting another, makes the -angles at the point of contact equal, each of the angles is called a -right angle, and the lines are said to be perpendicular to each other. -Remember especially that perpendicular and vertical have not the same -meaning. Vertical means an unvarying upright position. Perpendicular -means that one line or plane meets another line or plane at right -angles. - -The fig. 295 on page 246 is a study in perspective, showing a water -reflection. As rays from every visible part of the object are reflected, -all following the same law, the reflection will appear to the eye -_inverted_, and of the _same size as the object_. The arch itself forms -the upper half of a hollow cylinder, and the reflection forms the lower -half. The reflection shows much more of the interior of the arch than -can be seen directly. The leaning tree, the boy fishing, and the -receding banks, all are seen in accordance with the laws of reflection -and perspective. - -=THE HORIZONTAL LINE, THE POINT OF SIGHT AND THE VANISHING POINTS= are -the principal items. These should be studied in every room and during -every walk, and the more pleasing accidents of form stored in the mind -or committed to paper for future use. - -[Illustration: Fig. 304.] - -=OPTICS=, the science of sight, gives us the following laws: - -1. That we see by the agency of light. - -2. That light passes from objects to our eyes. - -3. That light travels in straight lines, which are called Visual Rays. - -The human eye may be briefly described as a chamber of a spherical or -globular form, with a circular opening in front. This circular opening -is called the pupil, and through it the visual rays pass to the interior -of the eye. The visual rays, passing from space in all directions -through the small pupil, are received upon what may be called the -interior wall of the globular chamber forming the eye (see fig. 305). -This interior wall is called the retina, and upon it the impressions of -external objects are received, just as they are received upon a screen -in a dark chamber. These impressions are conveyed by the optic nerve -from the retina to the brain. - -In front of the pupil is a segment of a small sphere, composed of the -cornea and the aqueous humor, both of which are transparent, and from -their shape and density have a convergent effect upon the rays passing -through them. - -Behind the pupil is the transparent crystalline lens, which, from its -shape and its elasticity, is a powerful agent in aiding the convergence -of the rays, and in bringing objects at various distances to a clear -focus upon the retina. - -[Illustration: Fig. 305.] - -The pupil has the power of contraction and dilation, which is influenced -by the quantity of light entering the eye, but when it is dilated to the -utmost its size is very small in comparison with the great chamber -forming the body of the eye. - -In fig. 305 we have a rough sectional diagram of the eye and an object -in front of it. This object, an arrow, is seen by means of the visual -rays proceeding from it, the principal two of which are shown. The -visual ray from _A_ passes through the pupil and is received upon the -retina at _a_. In the same way the visual ray from _B_ passes through -the pupil and is received upon the retina at _b_. It will thus be seen -that the impressions or images received upon the retina are inverted; -but, by long reason and experience, the mind has acquired the habit of -determining the real positions of objects, and does not, though the -image is so received, imagine them to be upside down. - -It will also be observed, in the same way, that that portion of an -object which is upon the right will be pictured upon the retina upon the -left, and _vice versa_, but the mind, for the reasons before stated, -never imagines the object to be reversed. This fact is another proof -that, as mentioned at the commencement of our study, to see accurately -is a matter of education and practice. - -And first of Optics; it was asserted, page 252, that we see by the -agency of light which passes from objects to our eyes in straight lines -which are called Visual Rays. - -We see by the agency of light, as all objects, except such as may be -styled self-luminous, when placed in a dark chamber are not perceivable -by us, except by touch, smell or hearing; we cannot _see_ them; they are -invisible. But when, by removing a shutter or igniting a flame, we -introduce something to the chamber which was not present when the -chamber was dark, we become at once conscious of the appearance of the -object, we perceive it by the sense of sight. - -This something which must always be present to enable us to see, is -called Light; all objects are made visible to the sense of seeing by its -agency. - -Without light, natural or artificial, it would be impossible to -distinguish one object from another. - -[Illustration: Fig. 306.] - -That the Visual Rays pass from objects in straight lines to the eye may -be proved by the following experiment (see fig. 306):--Pierce two -screens with a large pin, and place them so that the holes are in a -straight line with a flame, as the light of a candle or lamp. On fixing -the eye to one of these holes we are able to see the flame; but if we -slightly move the flame, one of the screens, or the eye, the flame is no -longer visible. To be visible, the flame, the holes in the screens, and -the eye must all be in the same straight line. See fig. 306. - -In fig. 299 the picture plane is represented by the rectangle _W X Y Z_. -Although the picture plane is here shown as a rectangle, it may be of -any shape or of any size. - -The observer is at _S_, looking through the picture plane at the cross -_R C O H_. The observer is standing upon a horizontal surface, which is -called the ground plane. If we are in a room, the window may be called a -picture plane and the floor a ground plane. - -The picture plane rests, as it were, upon the ground plane, in a line -which passes from _Y_ to _Z_. The two planes meet or intersect in this -line, which is called the ground line. The ground line is sometimes -called the picture line, or the measuring line. - -The visual rays, by means of which the observer sees the cross, will, in -their course from it to the eye, pass through the picture plane. These -visual rays will intersect the picture plane in a number of points, and -if we mark the true positions of these points the result will be a -perspective image of the cross. - -The rays are shown passing from the cross to the eye of the observer, -and meeting the picture plane in points _r_, _c_, _o_, _h_; _r_ being -joined to _o_, and _c_ to _h_, we have the perspective image of the -cross as it would appear to the observer at _S_. Of course an infinite -number of rays proceed from the cross to the eye of the observer; but it -is quite evident that we need only consider those proceeding from the -extremities of the object. - - -Scale or Approximate Perspective. - - Real, or true perspective, represents the object exactly as it is seen - in nature, where the parts that are far away from the eye of the - observer appear smaller than those nearby. Occasions arise, however, - in practical life, with its numerous phases of industrial - requirements, where the convenience of showing the complete form of - the object in a single view might preferably be coupled with the - convenience of scale dimensions. - -This has led to a modified perspective, that sacrifices some of the -accuracy in the appearance of the object to gain the advantage of scale -dimensions; this form of perspective may be distinguished by the -name--_approximate or scale perspective_--which does not represent the -object exactly as seen in nature, but where those parts that are afar -off are shown of the same size as those that are near by, and where the -lines that run out into space are parallel to each other and do not -converge into a vanishing point. - -To represent an object in perspective, the horizon and the point of -vision will have to appear in the drawing as the fundamental starting -points. - -Three dimensions are distinguished for the fixing of an object in space -from a certain reference point. They are height, breadth and thickness, -and are in their direction square to each other. The height is the -fundamental direction, being derived from the direction of gravity, that -invariably extends to the center of the earth. - -All directions in the perspective determination of an object are -parallel to these. - -Vertical lines and planes point toward the center of the earth, while -horizontal planes, including the directions of breadth and thickness, -are square to the vertical direction. In this, the principal visual ray -extends in the direction of thickness. - -For a clear understanding of perspective, it must be firmly fixed in -mind, that for each prominent point of the object behind the picture -plane, a corresponding point lies in the picture plane, in that position -where a straight line or ray of sight that is going from the eye to the -point of the object, cuts through the picture plane. - -Suppose we could replace these rays of sight by thin, visible threads of -wire that would go through little holes in the picture plane, we could -then walk around this bundle of rays, and by looking at it from three -different directions, we would get three different views of it. We may -look upon it from the top, from the side or from the end, where the -bundle of rays all concentrate in the eye of the observer. - -[Illustration: Fig. 307.] - -Figs. 307 and 308 show, in two cases, how these three views would -appear. The end views are those where the perspective picture appears on -the plane, while the top and side views only show where the rays -intersect the picture plane. The top view shows how far, for example, -point _A_ is distant from a vertical line _O Z_, while the side view -shows how far point _A_ is below horizontal line _O X_, which is at the -same height above the ground as the eye of the observer, _O_. Thus, all -points of the cube can be located on the picture plane, and the outlines -of the cube reproduced in perspective. - -[Illustration: Fig. 308.] - -Modified arrangements are shown in figs. 309 and 310 for parallel and -angular perspective. - -[Illustration: Fig. 309.] - -The views are so arranged in relation to each other that the picture -plane in the top view is parallel to the horizon and the ground-line, -which latter is the intersection of the picture plane with the level -ground of the end or perspective view. At the same time the eye of the -observer is in one and the same vertical line for both views, two -vanishing points may be found in the horizon outside of the principal -visual ray. To find the position of these two vanishing points in the -picture plane, the modified top view, fig. 310, is used. - -[Illustration: Fig. 310.] - -As all lines that end in a vanishing point must be parallel in reality, -this parallelism may be seen in the top view and lines through the eye -of the observer, parallel to the directions of the main lines of the -object, will cut the picture plane at the vanishing points. - -Through these two vanishing points the directions of two sets of lines -are found, the starting points of which are determined from the plane of -measurement. The third set of lines, being vertical, also appears -vertical and parallel in the picture. - -The position of each vertical line is found in the top view, where the -light rays from the observing eye to the ends of the vertical lines -intersect with the picture plane. Projecting these points down upon the -rays to the vanishing points produces the vertical lines in the picture. - -For example, in fig. 311, the purpose of perspective is entirely -defeated by placing the eye of the observer directly in front of the -object and arriving at the view taken in mechanical drawing which needs -supplementary views for complete comprehension of the form of the -object. - -[Illustration: Fig. 311.] - -In fig. 312 the eye of the observer is first placed directly opposite -the object, then it sees the object to the left but a short distance -away, while in the third figure the observer is farther away from the -object. In each case the picture plane and plane of measurement is at -the front face of the cube. - -[Illustration: Fig. 312.] - -[Illustration: Fig. 312 (second part).] - -For such simple objects, it is not necessary to draw the top view at -all. The only reminder of the top view is the eye or point of vision, -the picture plane that falls together for the sake of convenience with -the horizon of the end view and the ray that determines the measurement -point _M_, which is, in this suppressed reproduction, absolutely -necessary, in order to find the apparent position of the real corners -behind the picture plane. - -So far, only square or sharp-cornered objects have been represented in -perspective. - -It is evident, however, that round objects can also be shown in linear -perspective, placing reference lines on the object and representing -these as if they were real lines. A cylinder is thus shown in fig. 313 -of which the end planes will appear very distinctly in sharp outlines. - -[Illustration: Fig. 313.] - -Vertically, only the outlines of the cylinder, as contrasted against -space, will appear as distinct outlines, while the reference lines will -not appear and are therefore shown only as dotted lines. - -Fig. 314 shows the approximate or scale perspective with all the axes -drawn and the corresponding angles and scales marked. The outlines of -the object running in these directions appear all parallel to the axes. - -The approximate or scale perspective completely avoids all the -difficulties of choosing a point of sight, of having several views, -vanishing points and measurement points, and thus offers a -representative view, with a great saving of time and labor. Particularly -for mechanical purposes, where an artistic impression is not called for, -it presents a distinct advantage over the true or real perspective. - -[Illustration: Fig. 314.] - - -[Illustration: TABLES - -AND - -INDEX] - -[Illustration: MARINERS’ COMPASS.] - - - - -Useful Tables for Draughtsmen. - - -TABLE OF DECIMAL EQUIVALENTS. - -8ths, 16ths, 32ds and 64ths of an Inch. - - 8ths. - - ¹⁄₈ = .125 - ¹⁄₄ = .250 - ³⁄₈ = .375 - ¹⁄₂ = .500 - ⁵⁄₈ = .625 - ³⁄₄ = .750 - ⁷⁄₈ = .875 - - 16ths. - - ¹⁄₁₆ = .0625 - ³⁄₁₆ = .1875 - ⁵⁄₁₆ = .3125 - ⁷⁄₁₆ = .4375 - ⁹⁄₁₆ = .5625 - ¹¹⁄₁₆ = .6875 - ¹³⁄₁₆ = .8125 - ¹⁵⁄₁₆ = .9375 - - 32nds. - - ¹⁄₃₂ = .03125 - ³⁄₃₂ = .09375 - ⁵⁄₃₂ = .15625 - ⁷⁄₃₂ = .21875 - ⁹⁄₃₂ = .28125 - ¹¹⁄₃₂ = .34375 - ¹³⁄₃₂ = .40625 - ¹⁵⁄₃₂ = .46875 - ¹⁷⁄₃₂ = .53125 - ¹⁹⁄₃₂ = .59375 - ²¹⁄₃₂ = .65625 - ²³⁄₃₂ = .71875 - ²⁵⁄₃₂ = .78125 - ²⁷⁄₃₂ = .84375 - ²⁹⁄₃₂ = .90625 - ³¹⁄₃₂ = .96875 - - 64ths. - - ¹⁄₆₄ = .015625 - ³⁄₆₄ = .046875 - ⁵⁄₆₄ = .078125 - ⁷⁄₆₄ = .109375 - ⁹⁄₆₄ = .140625 - ¹¹⁄₆₄ = .171875 - ¹³⁄₆₄ = .203125 - ¹⁵⁄₆₄ = .234375 - ¹⁷⁄₆₄ = .265625 - ¹⁹⁄₆₄ = .296875 - ²¹⁄₆₄ = .328125 - ²³⁄₆₄ = .359375 - ²⁵⁄₆₄ = .390625 - ²⁷⁄₆₄ = .421875 - ²⁹⁄₆₄ = .453125 - ³¹⁄₆₄ = .484375 - ³³⁄₆₄ = .515625 - ³⁵⁄₆₄ = .546875 - ³⁷⁄₆₄ = .578125 - ³⁹⁄₆₄ = .609375 - ⁴¹⁄₆₄ = .640625 - ⁴³⁄₆₄ = .671875 - ⁴⁵⁄₆₄ = .703125 - ⁴⁷⁄₆₄ = .734375 - ⁴⁹⁄₆₄ = .765625 - ⁵¹⁄₆₄ = .796875 - ⁵³⁄₆₄ = .828125 - ⁵⁵⁄₆₄ = .859375 - ⁵⁷⁄₆₄ = .890625 - ⁵⁹⁄₆₄ = .921875 - ⁶¹⁄₆₄ = .953125 - ⁶³⁄₆₄ = .984375 - - -TABLE OF DECIMAL EQUIVALENTS - -Of Millimeters and Fractions of Millimeters. - - _mm._ _Inches._ - - ¹⁄₅₀ = .00079 - ²⁄₅₀ = .00157 - ³⁄₅₀ = .00236 - ⁴⁄₅₀ = .00315 - ⁵⁄₅₀ = .00394 - ⁶⁄₅₀ = .00472 - ⁷⁄₅₀ = .00551 - ⁸⁄₅₀ = .00630 - ⁹⁄₅₀ = .00709 - ¹⁰⁄₅₀ = .00787 - ¹¹⁄₅₀ = .00866 - ¹²⁄₅₀ = .00945 - ¹³⁄₅₀ = .01024 - ¹⁴⁄₅₀ = .01102 - ¹⁵⁄₅₀ = .01181 - ¹⁶⁄₅₀ = .01260 - ¹⁷⁄₅₀ = .01339 - ¹⁸⁄₅₀ = .01417 - ¹⁹⁄₅₀ = .01496 - ²⁰⁄₅₀ = .01575 - ²¹⁄₅₀ = .01654 - ²²⁄₅₀ = .01732 - ²³⁄₅₀ = .01811 - ²⁴⁄₅₀ = .01890 - ²⁵⁄₅₀ = .01969 - ²⁶⁄₅₀ = .02047 - ²⁷⁄₅₀ = .02126 - ²⁸⁄₅₀ = .02205 - ²⁹⁄₅₀ = .02283 - ³⁰⁄₅₀ = .02362 - ³¹⁄₅₀ = .02441 - ³²⁄₅₀ = .02520 - ³³⁄₅₀ = .02598 - ³⁴⁄₅₀ = .02677 - ³⁵⁄₅₀ = .02756 - ³⁶⁄₅₀ = .02835 - ³⁷⁄₅₀ = .02913 - ³⁸⁄₅₀ = .02992 - ³⁹⁄₅₀ = .03071 - ⁴⁰⁄₅₀ = .03150 - ⁴¹⁄₅₀ = .03228 - ⁴²⁄₅₀ = .03307 - ⁴³⁄₅₀ = .03386 - ⁴⁴⁄₅₀ = .03465 - ⁴⁵⁄₅₀ = .03543 - ⁴⁶⁄₅₀ = .03622 - ⁴⁷⁄₅₀ = .03701 - ⁴⁸⁄₅₀ = .03780 - ⁴⁹⁄₅₀ = .03858 - 1 = .03937 - 2 = .07874 - 3 = .11811 - 4 = .15748 - 5 = .19685 - 6 = .23622 - 7 = .27559 - 8 = .31496 - 9 = .35433 - 10 = .39370 - 11 = .43307 - 12 = .47244 - 13 = .51181 - 14 = .55118 - 15 = .59055 - 16 = .62992 - 17 = .66929 - 18 = .70866 - 19 = .74803 - 20 = .78740 - 21 = .82677 - 22 = .86614 - 23 = .90551 - 24 = .94488 - 25 = .98425 - 26 = 1.02362 - - 10 mm. = 1 Centimeter = 0.3937 inches. - 10 cm. = 1 Decimeter = 3.937 „ - 10 dm. = 1 Meter = 39.37 „ - 25.4 mm. = 1 English Inch. - - -RULES RELATIVE TO THE CIRCLE. - -The circle contains a greater area than any other plane figure bounded -by an equal perimeter or outline. - -TO FIND CIRCUMFERENCE-- - - Multiply diameter by 3.1416. - Or divide diameter by 0.3183. - -TO FIND DIAMETER-- - - Multiply circumference by 0.3183. - Or divide circumference by 3.1416. - -TO FIND RADIUS-- - - Multiply circumference by 0.15915. - Or divide circumference by 6.28318. - -TO FIND SIDE OF AN INSCRIBED SQUARE-- - - Multiply diameter by 0.7071. - Or multiply circumference by 0.2251. - Or divide circumference by 4.4428. - -TO FIND SIDE OF AN EQUAL SQUARE-- - - Multiply diameter by 0.8862. - Or divide diameter by 1.1284. - Or multiply circumference by 0.2821. - Or divide circumference by 3.545. - -SQUARE-- - - A side multiplied by 1.4142 equals diameter of its circumscribing - circle. - A side multiplied by 4.443 equals circumference of its circumscribing - circle. - A side multiplied by 1.128 equals diameter } - A side multiplied by 3.545 equals circumference } of an equal circle. - A side multiplied by 1.273 equals circle inches } - -TO FIND THE AREA OF A CIRCLE-- - - Multiply circumference by one-quarter of the diameter. - Or multiply the square of diameter by 0.7854. - Or multiply the square of circumference by .07958. - Or multiply the square of ¹⁄₂ diameter by 3.1416. - - Contents of cylinder = area of end × length. Contents of wedge = area - of base × ¹⁄₂ altitude. Surface of cylinder = area of both ends × - length × circumference. Surface of sphere = diameter squared × 3.1416, - or = diameter × circumference. Contents of sphere = diameter cubed × - .5236. Contents of pyramid or cone, right or oblique, regular or - irregular = area of base × ¹⁄₃ altitude. Area of triangle = base × ¹⁄₂ - altitude. Area of parallelogram = base × altitude. Area of trapezoid = - altitude × ¹⁄₂ the sum of parallel sides. - - -ROMAN TABLE. - - I. denotes One. - II. „ Two. - III. „ Three. - IV. „ Four. - V. „ Five. - VI. „ Six. - VII. „ Seven. - VIII. „ Eight. - IX. „ Nine. - X. „ Ten. - XI. „ Eleven. - XII. „ Twelve. - XIII. „ Thirteen. - XIV. „ Fourteen. - XV. „ Fifteen. - XVI. „ Sixteen. - XVII. „ Seventeen. - XVIII. „ Eighteen. - XIX. „ Nineteen. - XX. „ Twenty. - XXX. „ Thirty. - XL. „ Forty. - L. „ Fifty. - LX. „ Sixty. - LXX. „ Seventy. - LXXX. „ Eighty. - XC. „ Ninety. - C. „ One hundred. - D. „ Five hundred. - M. „ One thousand. - X̅. „ Ten thousand. - M̅. „ One million. - - -SOLID MEASURE, OR CUBIC MEASURE. - -This is used in measuring bodies, or things having length, breadth and -height or depth. - -TABLE. - - 1728 cubic inches (cu. in.) make 1 cubic foot (cu. ft.). - 27 cubic feet, „ 1 cubic yard (cu. yd.). - 128 cubic feet, „ 1 cord (C.). - - -CIRCULAR MEASURE. - - 60 seconds (″) make 1 minute (′). - 60 minutes „ 1 degree (°). - 360 degrees „ 1 circum. (C.). - -The circumference of every circle whatever, is supposed to be divided -into 360 equal parts, called _degrees_. - -A degree is ¹⁄₃₆₀ of the circumference of any circle, small or large. - -A quadrant is a fourth of a circumference, or an arc of 90 degrees. - -A degree is divided into 60 parts called minutes, expressed by the sign -(′), and each minute is divided into 60 seconds, expressed by (″); so -that the circumference of any circle contains 21,600 minutes, or -1,296,000 seconds. - - -LONG MEASURE--MEASURES OF LENGTH. - - 12 inches = 1 foot. - 3 feet = 1 yard. - 5¹⁄₂ yards = 1 rod. - 40 rods = 1 furlong. - 8 furlongs = 1 common mile. - 3 miles = 1 league. - -The mile (5,280 feet) of the above table is the legal mile of the United -States and England, and is called the statute mile. - - -Tables of Diameters, Circumferences and Areas of Circles. - - -----+-----------+---------- - Diam.| Area. | Circum. - -----+-----------+---------- - 0.0 | | - .1 | .007854| .31416 - .2 | .031416| .62832 - .3 | .070686| .94248 - .4 | .12566 | 1.2566 - | | - .5 | .19735 | 1.5708 - .6 | .28274 | 1.8850 - .7 | .38485 | 2.1991 - .8 | .50266 | 2.5133 - .9 | .63617 | 2.8274 - | | - 1.0 | .7854 | 3.1416 - .1 | .9503 | 3.4558 - .2 | 1.1310 | 3.7699 - .3 | 1.3273 | 4.0841 - .4 | 1.5394 | 4.3982 - | | - .5 | 1.7671 | 4.7124 - .6 | 2.0106 | 5.0265 - .7 | 2.2698 | 5.3407 - .8 | 2.5447 | 5.6549 - .9 | 2.8353 | 5.9690 - | | - 2.0 | 3.1416 | 6.2832 - .1 | 3.4636 | 6.5973 - .2 | 3.8013 | 6.9115 - .3 | 4.1548 | 7.2257 - .4 | 4.5239 | 7.5398 - | | - .5 | 4.9087 | 7.8540 - .6 | 5.3093 | 8.1681 - .7 | 5.7256 | 8.4823 - .8 | 6.1575 | 8.7965 - .9 | 6.6052 | 9.1106 - | | - 3.0 | 7.0686 | 9.4248 - .1 | 7.5477 | 9.7389 - .2 | 8.0425 | 10.0531 - .3 | 8.5530 | 10.3673 - .4 | 9.0792 | 10.6814 - | | - .5 | 9.6211 | 10.9956 - .6 | 10.1788 | 11.3097 - .7 | 10.7521 | 11.6239 - .8 | 11.3411 | 11.9381 - .9 | 11.9456 | 12.2522 - | | - 4.0 | 12.5664 | 12.5664 - .1 | 13.2025 | 12.8805 - .2 | 13.8544 | 13.1947 - .3 | 14.5220 | 13.5088 - .4 | 15.2053 | 13.8230 - | | - .5 | 15.9043 | 14.1372 - .6 | 16.6190 | 14.4513 - .7 | 17.3494 | 14.7655 - .8 | 18.0956 | 15.0796 - .9 | 18.8574 | 15.3938 - | | - 5.0 | 19.6350 | 15.7080 - .1 | 20.4282 | 16.0221 - .2 | 21.2372 | 16.3363 - .3 | 22.0618 | 16.6504 - .4 | 22.9022 | 16.9646 - | | - .5 | 23.7583 | 17.2788 - .6 | 24.6301 | 17.5929 - .7 | 25.5176 | 17.9071 - .8 | 26.4208 | 18.2212 - .9 | 27.3397 | 18.5354 - | | - 6.0 | 28.2743 | 18.8496 - .1 | 29.2247 | 19.1637 - .2 | 30.1907 | 19.4779 - .3 | 31.1725 | 19.7920 - .4 | 32.1699 | 20.1062 - | | - .5 | 33.1831 | 20.4204 - .6 | 34.2119 | 20.7345 - .7 | 35.2565 | 21.0487 - .8 | 36.3168 | 21.3628 - .9 | 37.3928 | 21.6770 - | | - 7.0 | 38.4845 | 21.9911 - .1 | 39.5919 | 22.3053 - .2 | 40.7150 | 22.6195 - .3 | 41.8539 | 22.9336 - .4 | 43.0084 | 23.2478 - | | - .5 | 44.1786 | 23.5619 - .6 | 45.3646 | 23.8761 - .7 | 46.5663 | 24.1903 - .8 | 47.7836 | 24.5044 - .9 | 49.0167 | 24.8186 - | | - 8.0 | 50.2655 | 25.1327 - .1 | 51.5300 | 25.4469 - .2 | 52.8102 | 25.7611 - .3 | 54.1061 | 26.0752 - .4 | 55.4177 | 26.3894 - | | - .5 | 56.7450 | 26.7035 - .6 | 58.0880 | 27.0177 - .7 | 59.4468 | 27.3319 - .8 | 60.8212 | 27.6460 - .9 | 62.2114 | 27.9602 - | | - 9.0 | 63.6173 | 28.2743 - .1 | 65.0388 | 28.5885 - .2 | 66.4761 | 28.9027 - .3 | 67.9291 | 29.2168 - .4 | 69.3978 | 29.5310 - | | - .5 | 70.8822 | 29.8451 - .6 | 72.3823 | 30.1593 - .7 | 73.8981 | 30.4734 - .8 | 75.4296 | 30.7876 - .9 | 76.9769 | 31.1018 - | | - 10.0 | 78.5398 | 31.4159 - .1 | 80.1185 | 31.7301 - .2 | 81.7128 | 32.0442 - .3 | 83.3229 | 32.3584 - .4 | 84.9487 | 32.6726 - | | - .5 | 86.5901 | 32.9887 - .6 | 88.2473 | 33.3009 - .7 | 89.9202 | 33.6150 - .8 | 91.6088 | 33.9292 - .9 | 93.3132 | 34.2434 - | | - 11.0 | 95.0332 | 34.5575 - .1 | 96.7689 | 34.8717 - .2 | 98.5203 | 35.1858 - .3 | 100.2875 | 35.5000 - .4 | 102.0703 | 35.8142 - | | - .5 | 103.8689 | 36.1283 - .6 | 105.6832 | 36.4425 - .7 | 107.5132 | 36.7566 - .8 | 109.3588 | 37.0708 - .9 | 111.2202 | 37.3850 - | | - 12.0 | 113.0973 | 37.6991 - .1 | 114.9901 | 38.0133 - .2 | 116.8987 | 38.3274 - .3 | 118.8229 | 38.6416 - .4 | 120.7628 | 38.9557 - | | - .5 | 122.7185 | 39.2099 - .6 | 124.6898 | 39.6841 - .7 | 126.6769 | 39.8982 - .8 | 128.6796 | 40.2121 - .9 | 130.6981 | 40.5265 - | | - 13.0 | 132.7323 | 40.8407 - .1 | 134.7822 | 41.1549 - .2 | 136.8478 | 41.4690 - .3 | 138.9291 | 41.7832 - .4 | 141.0261 | 42.0973 - | | - .5 | 143.1388 | 42.4116 - .6 | 145.2672 | 42.7257 - .7 | 147.4114 | 43.0398 - .8 | 149.5712 | 43.3540 - .9 | 151.7468 | 43.6681 - | | - 14.0 | 153.9380 | 43.9823 - .1 | 156.1450 | 44.2965 - .2 | 158.3677 | 44.6106 - .3 | 160.6061 | 44.9248 - .4 | 162.8602 | 45.2389 - | | - .5 | 165.1300 | 45.5531 - .6 | 167.4155 | 45.8673 - .7 | 169.7167 | 46.1814 - .8 | 172.0336 | 46.4956 - .9 | 174.3662 | 46.8097 - | | - 15.0 | 176.7146 | 47.1239 - .1 | 179.0786 | 47.4380 - .2 | 181.4584 | 47.7522 - .3 | 183.8539 | 48.0664 - .4 | 186.2650 | 48.3805 - | | - .5 | 188.6919 | 48.6947 - .6 | 191.1345 | 49.0088 - .7 | 193.5928 | 49.3230 - .8 | 196.0668 | 49.6372 - .9 | 198.5565 | 49.9513 - | | - 16.0 | 201.0619 | 50.2655 - .1 | 203.5831 | 50.5796 - .2 | 206.1199 | 50.8938 - .3 | 208.6724 | 51.2080 - .4 | 211.2407 | 51.5221 - | | - .5 | 213.8246 | 51.8363 - .6 | 216.4243 | 52.1504 - .7 | 219.0397 | 52.4646 - .8 | 221.6708 | 52.7788 - .9 | 224.3176 | 53.0929 - | | - 17.0 | 226.9801 | 53.4071 - .1 | 229.6583 | 53.7212 - .2 | 232.3522 | 54.0354 - .3 | 235.0618 | 54.3496 - .4 | 237.7871 | 54.6637 - | | - .5 | 240.5282 | 54.9779 - .6 | 243.2849 | 55.2920 - .7 | 246.0574 | 55.6062 - .8 | 248.8456 | 55.9203 - .9 | 251.6494 | 56.2345 - | | - 18.0 | 254.4690 | 56.5486 - .1 | 257.3043 | 56.8628 - .2 | 260.1553 | 57.1770 - .3 | 263.0220 | 57.4911 - .4 | 265.9044 | 57.8053 - | | - .5 | 268.8025 | 58.1195 - .6 | 271.7164 | 58.4336 - .7 | 274.6459 | 58.7478 - .8 | 277.5911 | 59.0619 - .9 | 280.5521 | 59.3761 - | | - 19.0 | 283.5287 | 59.6903 - .1 | 286.5211 | 60.0044 - .2 | 289.5292 | 60.3186 - .3 | 292.5530 | 60.6327 - .4 | 295.5925 | 60.9469 - | | - .5 | 298.6477 | 61.2611 - .6 | 301.7186 | 61.5752 - .7 | 304.8052 | 61.8894 - .8 | 307.9075 | 62.2035 - .9 | 311.0255 | 62.5177 - | | - 20.0 | 314.1593 | 62.8319 - .1 | 317.3087 | 63.1460 - .2 | 320.4739 | 63.4602 - .3 | 323.6547 | 63.7743 - .4 | 326.8513 | 64.0885 - | | - .5 | 330.0636 | 64.4026 - .6 | 333.2916 | 64.7168 - .7 | 336.5353 | 65.0310 - .8 | 339.7947 | 65.3451 - .9 | 343.0698 | 65.6593 - | | - 21.0 | 346.3606 | 65.9734 - .1 | 349.6671 | 66.2876 - .2 | 352.9894 | 66.6018 - .3 | 356.3273 | 66.9159 - .4 | 359.6809 | 67.2301 - | | - .5 | 363.0503 | 67.5442 - .6 | 266.4354 | 67.8584 - .7 | 369.8361 | 68.1726 - .8 | 373.2526 | 68.4867 - .9 | 376.6848 | 68.8009 - | | - 22.0 | 380.1327 | 69.1150 - .1 | 383.5963 | 69.4292 - .2 | 387.0756 | 69.7434 - .3 | 390.5707 | 70.0575 - .4 | 394.0814 | 70.3717 - | | - .5 | 397.6078 | 70.6858 - .6 | 401.1500 | 71.0000 - .7 | 404.7078 | 71.3142 - .8 | 408.2814 | 71.6283 - .9 | 411.8707 | 71.9425 - | | - 23.0 | 415.4756 | 72.2566 - .1 | 419.0993 | 72.5708 - .2 | 422.7327 | 72.8849 - .3 | 426.3848 | 73.1991 - .4 | 430.0526 | 73.5133 - | | - .5 | 433.7361 | 73.8274 - .6 | 437.4354 | 74.1416 - .7 | 441.1503 | 74.4557 - .8 | 444.8809 | 74.7699 - .9 | 448.6273 | 75.0841 - | | - 24.0 | 452.3893 | 75.3982 - .1 | 456.1671 | 75.7424 - .2 | 459.9606 | 76.0265 - .3 | 463.7693 | 76.3407 - .4 | 467.5947 | 76.6549 - | | - .5 | 471.4352 | 76.9690 - .6 | 475.2916 | 77.2832 - .7 | 479.1636 | 77.5973 - .8 | 483.0513 | 77.9115 - .9 | 486.9547 | 78.2257 - | | - 25.0 | 490.8739 | 78.5398 - .1 | 494.8087 | 78.8540 - .2 | 498.7592 | 79.1681 - .3 | 502.7255 | 79.4823 - .4 | 506.7075 | 79.7965 - | | - .5 | 510.7052 | 80.1106 - .6 | 514.7185 | 80.4248 - .7 | 518.7476 | 80.7389 - .8 | 522.7924 | 81.0531 - .9 | 526.8529 | 81.3672 - | | - 26.0 | 530.9292 | 81.6814 - .1 | 535.0211 | 81.9956 - .2 | 539.1287 | 82.3097 - .3 | 543.2521 | 82.6239 - .4 | 547.3911 | 82.9380 - | | - .5 | 551.5459 | 83.2522 - .6 | 555.7163 | 83.5664 - .7 | 559.9025 | 83.8805 - .8 | 564.1044 | 84.1947 - .9 | 568.3220 | 84.5088 - | | - 27.0 | 572.5553 | 84.8230 - .1 | 576.8043 | 85.1372 - .2 | 581.0690 | 85.4513 - .3 | 585.3494 | 85.7655 - .4 | 589.6455 | 86.0796 - | | - .5 | 593.9574 | 86.3938 - .6 | 598.2849 | 86.7080 - .7 | 602.6282 | 87.0221 - .8 | 606.9871 | 87.3363 - .9 | 611.3618 | 87.6504 - | | - 28.0 | 615.7522 | 87.9646 - .1 | 620.1582 | 88.2788 - .2 | 624.5800 | 88.5929 - .3 | 629.0175 | 88.9071 - .4 | 633.4707 | 89.2212 - | | - .5 | 637.9397 | 89.5354 - .6 | 642.4243 | 89.8495 - .7 | 646.9246 | 90.1637 - .8 | 651.4407 | 90.4779 - .9 | 655.9724 | 90.7920 - | | - 29.0 | 660.5199 | 91.1063 - .1 | 665.0830 | 91.4203 - .2 | 669.6619 | 91.7345 - .3 | 674.2565 | 92.0487 - .4 | 678.8668 | 92.3628 - | | - .5 | 683.4928 | 92.6770 - .6 | 688.1345 | 92.9911 - .7 | 692.7919 | 93.3053 - .8 | 697.4650 | 93.6195 - .9 | 702.1538 | 93.9336 - | | - 30.0 | 706.8583 | 94.2478 - .1 | 711.5786 | 94.5610 - .2 | 716.3145 | 94.8761 - .3 | 721.0662 | 95.1903 - .4 | 725.8336 | 95.5044 - | | - .5 | 730.6167 | 95.8186 - .6 | 735.4154 | 96.1327 - .7 | 740.2299 | 96.4469 - .8 | 745.0601 | 96.7611 - .9 | 749.9060 | 97.0752 - | | - 31.0 | 754.7676 | 97.3894 - .1 | 759.6450 | 97.7035 - .2 | 761.5380 | 98.0177 - .3 | 769.4467 | 98.3319 - .4 | 774.3712 | 98.6460 - | | - .5 | 779.3113 | 98.9602 - .6 | 784.2672 | 99.2743 - .7 | 789.2388 | 99.5885 - .8 | 794.2260 | 99.9026 - .9 | 799.2290 |100.2168 - | | - 32.0 | 804.2477 |100.5310 - .1 | 809.2821 |100.8451 - .2 | 814.3322 |101.1593 - .3 | 819.3980 |101.4734 - .4 | 824.4796 |101.7876 - | | - .5 | 829.5768 |102.1018 - .6 | 834.6898 |102.4159 - .7 | 839.8185 |102.7301 - .8 | 844.9628 |103.0442 - .9 | 850.1229 |103.3584 - | | - 33.0 | 855.2986 |103.6726 - .1 | 860.4902 |103.9867 - .2 | 865.6973 |104.3009 - .3 | 870.9202 |104.6150 - .4 | 876.1588 |104.9292 - | | - .5 | 881.4131 |105.2434 - .6 | 886.6831 |105.5575 - .7 | 891.9688 |105.8717 - .8 | 897.2703 |106.1858 - .9 | 902.5874 |106.5000 - | | - 34.0 | 907.9203 |106.8142 - .1 | 913.2688 |107.1283 - .2 | 918.6331 |107.4425 - .3 | 924.0131 |107.7566 - .4 | 929.4088 |108.0708 - | | - .5 | 934.8202 |108.3849 - .6 | 940.2473 |108.6991 - .7 | 945.6901 |109.0133 - .8 | 951.1486 |109.3274 - .9 | 956.6228 |109.6416 - | | - 35.0 | 962.1128 |109.9557 - .1 | 967.6184 |110.2699 - .2 | 973.1397 |110.5841 - .3 | 978.6768 |110.8982 - .4 | 984.2296 |111.2124 - | | - .5 | 989.7980 |111.5265 - .6 | 995.3822 |111.8407 - .7 |1000.9821 |112.1549 - .8 |1006.5977 |112.4690 - .9 |1012.2290 |112.7832 - | | - 36.0 |1017.8760 |113.0973 - .1 |1023.5387 |113.4115 - .2 |1029.2172 |113.7257 - .3 |1034.9113 |114.0398 - .4 |1040.6212 |114.3540 - | | - .5 |1046.3467 |114.6681 - .6 |1052.0880 |114.9823 - .7 |1057.8449 |115.2965 - .8 |1063.6176 |115.6106 - .9 |1069.4060 |115.9248 - | | - 37.0 |1075.2101 |116.2389 - .1 |1081.0299 |116.5531 - .2 |1086.8654 |116.8672 - .3 |1093.7166 |117.1814 - .4 |1098.5835 |117.4956 - | | - .5 |1104.4662 |117.8097 - .6 |1110.3645 |118.1239 - .7 |1116.2786 |118.4380 - .8 |1122.2083 |118.7522 - .9 |1128.1538 |119.0664 - | | - 38.0 |1134.1149 |119.3805 - .1 |1140.0918 |119.6947 - .2 |1146.0844 |120.0088 - .3 |1152.0927 |120.3230 - .4 |1158.1167 |120.6372 - | | - .5 |1164.1564 |120.9513 - .6 |1170.2118 |121.2655 - .7 |1176.2830 |121.5796 - .8 |1182.3698 |121.8938 - .9 |1188.4724 |122.2080 - | | - 39.0 |1194.5906 |122.5221 - .1 |1200.7246 |122.8363 - .2 |1206.8742 |123.1504 - .3 |1213.0396 |123.4646 - .4 |1219.2207 |123.7788 - | | - .5 |1225.4175 |124.0929 - .6 |1231.6300 |124.4071 - .7 |1237.8582 |124.7212 - .8 |1244.1021 |125.0354 - .9 |1250.3617 |125.3495 - | | - 40.0 |1256.6371 |125.6637 - .1 |1262.9281 |125.9779 - .2 |1269.2348 |126.2920 - .3 |1275.5573 |126.6062 - .4 |1281.8955 |126.9203 - | | - .5 |1288.2493 |127.2345 - .6 |1294.3189 |127.5487 - .7 |1301.0042 |127.8628 - .8 |1307.4052 |128.1770 - .9 |1313.8219 |128.4911 - | | - 41.0 |1320.2543 |128.8053 - .1 |1326.7024 |129.1195 - .2 |1333.1663 |129.4336 - .3 |1339.6458 |129.7478 - .4 |1346.1410 |130.0619 - | | - .5 |1352.6520 |130.3761 - .6 |1359.1786 |130.6903 - .7 |1365.7210 |131.0044 - .8 |1372.2791 |131.3186 - .9 |1378.8529 |131.6227 - | | - 42.0 |1385.4424 |131.9469 - .1 |1392.0476 |132.2611 - .2 |1398.6685 |132.5752 - .3 |1405.3051 |132.8894 - .4 |1411.9574 |133.2035 - | | - .5 |1418.6254 |133.5177 - .6 |1425.3092 |133.8318 - .7 |1432.0086 |134.1460 - .8 |1438.7238 |134.4602 - .9 |1445.4546 |134.7743 - | | - 43.0 |1452.2012 |135.0885 - .1 |1458.9635 |135.4026 - .2 |1465.7415 |135.7168 - .3 |1472.5352 |136.0310 - .4 |1479.3446 |136.3451 - | | - .5 |1486.1697 |136.6593 - .6 |1493.0105 |136.9734 - .7 |1499.8670 |137.2876 - .8 |1506.7393 |137.6018 - .9 |1513.6272 |137.9159 - | | - 44.0 |1520.5308 |138.2301 - .1 |1527.4502 |138.5442 - .2 |1534.3853 |138.8584 - .3 |1541.3360 |139.1726 - .4 |1548.3025 |139.4867 - | | - .5 |1555.2847 |139.8009 - .6 |1562.2826 |140.1153 - .7 |1569.2063 |140.4292 - .8 |1576.3255 |140.7434 - .9 |1583.3706 |141.0575 - | | - 45.0 |1590.4313 |141.3717 - .1 |1597.5077 |141.6858 - .2 |1604.5999 |142.0000 - .3 |1611.7077 |142.3142 - .4 |1618.8313 |142.6283 - | | - .5 |1625.9705 |142.9425 - .6 |1633.1255 |143.2566 - .7 |1640.2962 |143.5708 - .8 |1647.4826 |143.8849 - .9 |1654.6847 |144.1991 - | | - 46.0 |1661.9025 |144.5133 - .1 |1669.1360 |144.8274 - .2 |1676.3853 |145.1416 - .3 |1683.6502 |145.4557 - .4 |1690.9308 |145.7699 - | | - .5 |1698.2272 |146.0841 - .6 |1705.5392 |146.3982 - .7 |1712.8670 |146.7124 - .8 |1720.2105 |147.0265 - .9 |1727.5697 |147.3407 - | | - 47.0 |1734.9445 |147.6550 - .1 |1742.3351 |147.9690 - .2 |1749.7414 |148.2832 - .3 |1757.1635 |148.5973 - .4 |1764.6012 |148.9115 - | | - .5 |1772.0546 |149.2257 - .6 |1779.5237 |149.5398 - .7 |1787.0086 |149.8540 - .8 |1794.5091 |150.1681 - .9 |1802.0254 |150.4823 - | | - 48.0 |1809.5574 |150.7964 - .1 |1817.1050 |151.1105 - .2 |1824.6684 |151.4248 - .3 |1832.2475 |151.7389 - .4 |1839.8423 |152.0531 - | | - .5 |1847.4528 |152.3672 - .6 |1855.0790 |152.6814 - .7 |1862.7210 |152.9956 - .8 |1870.3786 |153.3097 - .9 |1878.0519 |153.6239 - | | - 49.0 |1885.7409 |153.9380 - .1 |1893.4457 |154.2522 - .2 |1901.1662 |154.5664 - .3 |1908.9024 |154.8805 - .4 |1916.6543 |155.1947 - | | - .5 |1924.4218 |155.5088 - .6 |1932.2051 |155.8230 - .7 |1940.0042 |156.1372 - .8 |1947.8189 |156.4513 - .9 |1955.6493 |156.7655 - | | - 50.0 |1963.4954 |157.0796 - .1 |1971.3572 |157.3938 - .2 |1979.2348 |157.7080 - .3 |1987.1280 |158.0221 - .4 |1995.0370 |158.3363 - | | - .5 |2002.9617 |158.6504 - .6 |2010.9020 |158.9646 - .7 |2018.8581 |159.2787 - .8 |2026.8299 |159.5929 - .9 |2034.8174 |159.9071 - | | - 51.0 |2042.6206 |160.2212 - .1 |2050.8895 |160.5354 - .2 |2058.8742 |160.8495 - .3 |2066.9245 |161.1637 - .4 |2074.9905 |161.4779 - | | - .5 |2083.0723 |161.7920 - .6 |2091.1697 |162.1062 - .7 |2099.2829 |162.4203 - .8 |2107.4118 |162.7345 - .9 |2115.5563 |163.0487 - | | - 52.0 |2123.7166 |163.3628 - .1 |2131.8926 |163.6770 - .2 |2140.0843 |163.9911 - .3 |2148.2917 |164.3053 - .4 |2156.5149 |164.6195 - | | - .5 |2164.7537 |164.9336 - .6 |2173.0082 |165.2479 - .7 |2181.2785 |165.5619 - .8 |2189.5644 |165.8761 - .9 |2197.8661 |166.1903 - | | - 53.0 |2206.1834 |166.5044 - .1 |2214.5165 |166.8186 - .2 |2222.8653 |167.1327 - .3 |2231.2298 |167.4469 - .4 |2239.6100 |167.7610 - | | - .5 |2248.0059 |168.0752 - .6 |2256.4175 |168.3894 - .7 |2264.8448 |168.7035 - .8 |2273.2879 |169.0177 - .9 |2281.7466 |169.3318 - | | - 54.0 |2290.2210 |169.6460 - .1 |2298.7112 |169.9602 - .2 |2307.2171 |170.2743 - .3 |2315.7386 |170.5885 - .4 |2324.2759 |170.9026 - | | - .5 |2332.8289 |171.2168 - .6 |2341.3976 |171.5310 - .7 |2349.9820 |171.8451 - .8 |2358.5821 |172.1593 - .9 |2367.1979 |172.4735 - | | - 55.0 |2375.8294 |172.7876 - .1 |2384.4767 |173.1017 - .2 |2393.1396 |173.4159 - .3 |2401.8183 |173.7301 - .4 |2410.5126 |174.0442 - | | - .5 |2419.2227 |174.3584 - .6 |2427.9485 |174.6726 - .7 |2436.6899 |174.9867 - .8 |2145.4471 |175.3009 - .9 |2454.2200 |175.6150 - -----+-----------+-------- - - -UNITED STATES STANDARD SIZES OF WROUGHT IRON WELDED PIPE. - - ------+-------+------+------+--------+--------+--------+--------+ - | | | | | | | | - | | | | | | Length | Length | - | | | | | | of pipe| of pipe| - | | | | | | per | per | - Inside| Actual| |Actual| | | square | square | - diam-|outside| |Inside|External|Internal| foot of| foot of| - eter | Diam- |Thick-| Diam-| circum-| circum-| outside| inside | - nom. | eter. | ness.| eter.|ference.|ference.|surface.|surface.| - ------+-------+------+------+--------+--------+--------+--------+ - ¹⁄₈ | .405| .068 | 0.269| 1.272 | 0.848 | 9.440 | 14.15 | - ¹⁄₄ | .54 | .088 | 0.364| 1.696 | 1.144 | 7.075 | 10.50 | - ³⁄₈ | .675| .091 | 0.493| 2.121 | 1.552 | 5.657 | 7.67 | - ¹⁄₂ | .840| .109 | 0.622| 2.652 | 1.957 | 4.502 | 6.13 | - ³⁄₄ | 1.050| .113 | 0.824| 3.299 | 2.589 | 3.637 | 4.635 | - 1 | 1.315| .134 | 1.047| 4.134 | 3.292 | 2.903 | 3.679 | - 1¹⁄₄ | 1.660| .140 | 1.38 | 5.215 | 4.335 | 2.301 | 2.768 | - 1¹⁄₂ | 1.90 | .145 | 1.61 | 5.969 | 5.061 | 2.010 | 2.371 | - 2 | 2.375| .154 | 2.067| 7.461 | 6.494 | 1.611 | 1.848 | - 2¹⁄₂ | 2.875| .204 | 2.467| 9.032 | 7.754 | 1.328 | 1.547 | - 3 | 3.50 | .217 | 3.066| 10.996 | 9.636 | 1.091 | 1.245 | - 3¹⁄₂ | 4.0 | .226 | 3.548| 12.566 | 11.146 | .955 | 1.077 | - 4 | 4.50 | .237 | 4.026| 14.137 | 12.648 | .849 | 0.949 | - 4¹⁄₂ | 5.0 | .247 | 4.506| 15.708 | 14.153 | .765 | 0.848 | - 5 | 5.563| .259 | 5.045| 17.475 | 15.849 | .629 | 0.757 | - 6 | 6.625| .280 | 5.065| 20.813 | 19.054 | .577 | 0.630 | - 7 | 7.625| .301 | 7.023| 23.954 | 22.063 | .505 | 0.544 | - 8 | 8.625| .322 | 7.981| 27.096 | 25.076 | .444 | 0.478 | - 9 | 9.688| .344 | 9.00 | 30.433 | 28.277 | .394 | 0.425 | - 10 | 10.750| .366 |10.018| 33.772 | 31.475 | .355 | 0.381 | - ------+-------+------+------+--------+--------+--------+--------+ - - ------+------+-------+-------+-------+-------+------ - | | | | | | - | | | Length| | | - | | |of pipe| | | - | | | con- | Weight|No. of | - Inside| | Actual|taining| per |threads|Length - diam-| Ex- | in- | one | foot | per | per- - eter |ternal| ternal| cubic | of |Inch of| fect - nom. | area.| area. | foot. |length.| screw.|screw. - ------+------+-------+-------+-------+-------+------ - ¹⁄₈ | .129| .0572|2500. | .243| 27 | 0.19 - ¹⁄₄ | .229| .1041|1385. | .422| 18 | 0.29 - ³⁄₈ | .358| .1916| 751.5 | .561| 18 | 0.30 - ¹⁄₂ | .554| .3048| 472.4 | .845| 14 | 0.39 - ³⁄₄ | .866| .5333| 270.0 | 1.126| 14 | 0.40 - 1 | 1.357| .8627| 166.9 | 1.670| 11¹⁄₂ | 0.51 - 1¹⁄₄ | 2.164| 1.496 | 96.25| 2.258| 11¹⁄₂ | 0.54 - 1¹⁄₂ | 2.835| 2.038 | 70.65| 2.694| 11¹⁄₂ | 0.55 - 2 | 4.430| 3.355 | 42.36| 3.667| 11¹⁄₂ | 0.58 - 2¹⁄₂ | 6.491| 4.783 | 30.11| 5.773| 8 | 0.89 - 3 | 9.621| 7.388 | 19.40| 7.547| 8 | 0.95 - 3¹⁄₂ |12.566| 9.837 | 14.56| 9.055| 8 | 1.00 - 4 |15.901|12.730 | 11.31| 10.728| 8 | 1.05 - 4¹⁄₂ |19.635|15.939 | 9.03| 12.492| 8 | 1.10 - 5 |24.299|19.990 | 7.20| 14.564| 8 | 1.16 - 6 |34.471|28.889 | 4.98| 18.767| 8 | 1.26 - 7 |45.663|38.737 | 3.72| 23.410| 8 | 1.36 - 8 |58.426|50.039 | 2.88| 28.348| 8 | 1.46 - 9 |73.715|63.633 | 2.26| 34.677| 8 | 1.57 - 10 |90.762|78.838 | 1.80| 40.641| 8 | 1.68 - ------+------+-------+-------+-------+-------+------ - -Thread taper three-fourths inch to one foot. - -All pipe below 1¹⁄₂ inches is butt-welded, and proved to 300 pounds per -square inch; 1¹⁄₂ inch and above is lap-welded and proved to 500 pounds -per square inch. - - -STANDARDS FOR WIRE GAUGES IN USE IN THE UNITED STATES. - -Dimensions of Sizes in Decimal Parts of an Inch. - - ------+--------+--------+---------+------+------+----------+------ - | | | Washburn| | | | - Number|American|Birming-| & Moen | Impe-| | U. S. |Number - of |or Brown| ham, or|Mfg. Co.,| rial |Stubs’| Stand. | of - Wire | & | Stubs’ | Worces- | Wire | Steel| for | Wire - Gauge.| Sharpe.| Wire. | ter, Ms.|Gauge.| Wire.| Plate. |Gauge. - ------+--------+--------+---------+------+------+----------+------ - 000000| .... | .... | .... | .464 | .... |.46875 |000000 - 00000| .... | .... | .... | .432 | .... |.4375 | 00000 - 0000| .46 | .454 | .3938 | .400 | .... |.40625 | 0000 - 000| .40964 | .425 | .3625 | .372 | .... |.375 | 000 - 00| .3648 | .38 | .3310 | .348 | .... |.34375 | 00 - 0| .32486 | .34 | .3065 | .324 | .... |.3125 | 0 - 1| .2893 | .3 | .2830 | .300 | .227 |.28125 | 1 - 2| .25763 | .284 | .2625 | .276 | .219 |.265625 | 2 - 3| .22942 | .259 | .2437 | .252 | .212 |.25 | 3 - 4| .20431 | .238 | .2253 | .232 | .207 |.234375 | 4 - 5| .18194 | .22 | .2070 | .212 | .204 |.21875 | 5 - 6| .16202 | .203 | .1920 | .192 | .201 |.203125 | 6 - 7| .14428 | .18 | .1770 | .176 | .199 |.1875 | 7 - 8| .12849 | .165 | .1620 | .160 | .197 |.171875 | 8 - 9| .11443 | .148 | .1483 | .144 | .194 |.15625 | 9 - 10| .10189 | .134 | .1350 | .128 | .191 |.140625 | 10 - 11| .090742| .12 | .1205 | .116 | .188 |.125 | 11 - 12| .080808| .109 | .1055 | .104 | .185 |.109375 | 12 - 13| .071961| .095 | .0915 | .092 | .182 |.09375 | 13 - 14| .064084| .083 | .0800 | .080 | .180 |.078125 | 14 - 15| .057068| .072 | .0720 | .072 | .178 |.0703125 | 15 - 16| .05082 | .065 | .0625 | .064 | .175 |.0625 | 16 - 17| .045257| .058 | .0540 | .056 | .172 |.05625 | 17 - 18| .040303| .049 | .0475 | .048 | .168 |.05 | 18 - 19| .03589 | .042 | .0410 | .040 | .164 |.04375 | 19 - 20| .031961| .035 | .0348 | .036 | .161 |.0375 | 20 - 21| .028462| .032 | .03175 | .032 | .157 |.034375 | 21 - 22| .025347| .028 | .0286 | .028 | .155 |.03125 | 22 - 23| .022571| .025 | .0258 | .024 | .153 |.028125 | 23 - 24| .0201 | .022 | .0230 | .022 | .151 |.025 | 24 - 25| .0179 | .02 | .0204 | .020 | .148 |.021875 | 25 - 26| .01594 | .018 | .0181 | .018 | .146 |.01875 | 26 - 27| .014195| .016 | .0173 | .0164| .143 |.0171875 | 27 - 28| .012641| .014 | .0162 | .0149| .139 |.015625 | 28 - 29| .011257| .013 | .0150 | .0136| .134 |.0140625 | 29 - 30| .010025| .012 | .0140 | .0124| .127 |.0125 | 30 - 31| .008928| .01 | .0132 | .0116| .120 |.0109375 | 31 - 32| .00795 | .009 | .0128 | .0108| .115 |.01015625 | 32 - 33| .00708 | .008 | .0118 | .0100| .112 |.009375 | 33 - 34| .006304| .007 | .0104 | .0092| .110 |.00859375 | 34 - 35| .005614| .005 | .0095 | .0084| .108 |.0078125 | 35 - 36| .005 | .004 | .0090 | .0076| .106 |.00703125 | 36 - 37| .004453| .... | .... | .0068| .103 |.006640625| 37 - 38| .003965| .... | .... | .0060| .101 |.00625 | 38 - 39| .003531| .... | .... | .0052| .099 | .... | 39 - 40| .003144| .... | .... | .0048| .097 | .... | 40 - ------+--------+--------+---------+------+------+----------+------ - - -UNITED STATES STANDARD SIZES OF BOLTS. - - +------+--------+--------+--------+ - | |DISTANCE| | | - | | ACROSS |DISTANCE| | - | | FLATS, | ACROSS | THICK- | - | DIAM-| SQUARE |CORNERS,| NESS | - | ETER.|AND HEX.| HEX. |OF HEAD.| - +------+--------+--------+--------+ - | ¹⁄₄″| ¹⁄₂″ | ⁹⁄₁₆″ | ¹⁄₄″ | - | ³⁄₈ | ¹¹⁄₁₆ | ²⁵⁄₃₂ | ¹¹⁄₃₂ | - | ¹⁄₂ | ⁷⁄₈ | 1 | ⁷⁄₁₆ | - | ⁵⁄₈ | 1¹⁄₁₆ | 1⁷⁄₃₂ | ¹⁷⁄₃₂ | - | ³⁄₄ | 1¹⁄₄ | 1⁷⁄₁₆ | ⁵⁄₈ | - | ⁷⁄₈ | 1⁷⁄₁₆ | 1²¹⁄₃₂ | ²¹⁄₃₂ | - | 1 | 1⁵⁄₈ | 1⁷⁄₈ | ¹³⁄₁₆ | - | 1¹⁄₈ | 1¹³⁄₁₆ | 2³⁄₃₂ | ²⁹⁄₃₂ | - | 1¹⁄₄ | 2 | 2⁵⁄₁₆ | 1 | - | 1³⁄₈ | 2³⁄₁₆ | 2¹⁄₂ | 1³⁄₃₂ | - | 1¹⁄₂ | 2³⁄₈ | 2³⁄₄ | 1³⁄₁₆ | - | 1⁵⁄₈ | 2⁹⁄₁₆ | 2¹⁵⁄₁₆ | 1⁹⁄₃₂ | - | 1³⁄₄ | 2³⁄₄ | 3³⁄₁₆ | 1³⁄₈ | - | 1⁷⁄₈ | 2¹⁵⁄₁₆ | 3¹³⁄₃₂ | 1¹⁵⁄₃₂ | - | 2 | 3¹⁄₈ | 3⁵⁄₈ | 1⁹⁄₁₆ | - | 2¹⁄₄ | 3¹⁄₂ | 4¹⁄₁₆ | 1³⁄₄ | - | 2¹⁄₂ | 3⁷⁄₈ | 4¹⁄₂ | 1¹⁵⁄₁₆ | - | 2³⁄₄ | 4¹⁄₄ | 4⁷⁄₈ | 2¹⁄₈ | - | 3 | 4⁵⁄₈ | 5¹¹⁄₃₂ | 2⁵⁄₁₆ | - +------+--------+--------+--------+ - - -UNITED STATES STANDARD SCREW THREAD GAUGE. - -[Illustration: Fig. 316.] - - - - -Some Things Personal. - - -In the preparation of this work the idea of self-help has never been -forgotten; nothing has been held back or omitted which would, in the -author’s opinion, tend to advance the student in the draughtsman’s art. - -The volume contains the experience in practical drawing, as related to -engineering and mechanics, of over one hundred years, i. e., the -author’s, Mr. Perrott’s and Mr. Lucas’ experiences added together exceed -that period. - -Hence, the work should be really helpful; it has been aimed also to be -entertaining and with easy tasks; all the illustrations of the book are -recommended as models for practice--they have been selected with that -view. - -Moreover, as between author and publishers, the latter have agreed to -issue the work in the most thorough style possible--as to paper, -printing and binding--and to sell it at a very generously low price, -considering all things. - -With the closing words “hail and farewell,” the author bids adieu (God -be with you) to the reader and the student. - -[Illustration: BEACON LIGHT.] - - - - - Self - Hawkins’ Mechanical Drawing. - Help - -Index. - - - PAGE - - =Acute Angle=, def. 42 - - =Acute-Angled Triangle=, def. 50 - - =Addendum Circle=, illus. 200 - - =Alphabets=, Gothic, desc. 171 - - =Altitude=, def. 41 - - =Altitude of a Polygon=, def. 47 - - =American Machinist=, Quotation from 141 - - =Angle=, def. 41, 83 - To bisect an 89 - To draw an 89 - - =Angle-Iron=, illus. 75 - - =Angle-Plate=, illus. 75 - - =Angular Perspective Drawing=, illus. 260, 265 - - =Apex=, def. 42 - - =Apex of an Angle=, def. 42 - - =Arc=, def. 42 - Complement of an 99 - Cosecant of an 99 - Cotangent of an 99 - Sine of an 99 - Supplement of an 99 - Tangent of an 99 - Versed Sine of an 99 - - =Arc of Circle=, To find the center of an 90 - - =Arcs=, Drawing 146 - Illus. 146 - - =Arrow-Heads=, how made 172, 176 - - =Axiom=, def. 83 - - =Axis=, Conjugate, def. 96 - Of a Figure, def. 43 - Of a Solid, def. 42 - Transverse, def. 96 - - - =Backlash in Gearing= 215 - - =Backward Projection= desc. 152, illus. 152-3 - - =Base=, def. 43 - Of a Polygon, def. 47 - - =Beacon Light=, illus. 282 - - =Beam Compasses= desc. 124, illus. 124 - - =Bending Machine=, Hydraulic desc. 221, illus. 220-1 - - =Benjamin, Prof. Chas.=, “How and What to Study” 23 - - =Bevel-Gear=, desc. 201 - - =Bevel Mortise Wheel=, desc. 203 - - =Bevel Wheel= desc. 199, illus. 203 - - =Bisect=, def. 43 - - =Bisector=, def. 43 - - =Blackboard=, illus. and desc. 27 - - =Blackboard Drawing= 28 - - =Blue Printing= desc. 186, illus. 187 - Test pieces 188 - - =Blue Prints=, Office rules for 196 - - =Black Process Copying= 188 - - =Boiler-Plate=, Riveted, illus. 76 - - =Bolt=, Square-head, illus. 76 - - =Bolt and Nut=, Square-head desc. 144, illus. 145 - Hexagon desc. 144, illus. 76, 144 - - =Bow-Dividers= desc. 123, illus. 122 - - =Bow-Pencil=, desc. 123 - - =Bows=, Use of 242 - - =Brick=, Section Lining, illus. 182 - - =Broken Lines=, How to Draw 33 - Def. 46 - - =Bumping Post=, illus. 226 - - - =Calipers=, illus. vi - - =Cast-Iron=, Section-Lining, illus. 182 - - =Caulking Tool=, illus. 76 - - =Center Line=, def. 46 - - =Center Lines=, In Drawings 240-1 - In Shop Drawings 192 - - =Chalk-Crayon= desc. 27, illus. 27, 37 - - =Chalk-Work= 27 - Instruments for Drawing, illus. 29 - - =Channel-Iron=, illus. 75 - - =Checking Drawings= 194 - - =Circle=, def. 43 - To describe about a square 93 - about a triangle 93 - through two points 90 - through three points 90 - To find the center 90 - To inscribe in a square 94 - in a triangle 94 - - =Circles=, Drawing desc. 146, illus. 146 - - =Circumference of a Circle= 43 - - =Circumscribe=, def. 43 - - =Circular Pitch Line=, illus. 200 - - =Classifying Drawings=, Office Rules for 191 - - =Clearance in Wheel Teeth= 215 - - =Cog-Wheel= def. 201, illus. 201 - Section Lining, illus. 183 - - =Coin=, Perspective View of a, illus. 248 - - =Color and Tints= 185 - - =Compass=, Mariners’, illus. 268 - - =Compasses=, Beam, desc. and illus. 124 - Desc. and illus. 121 - For holding chalk, illus. 29 - How to hold, illus. 136 - - =Complement of an Arc= 99 - - =Composition=, Section-Lining, illus. 182 - - =Concave=, def. 44 - - =Cone=, def. 44 - - =Conjugate Axis=, def. 96 - - =Construction=, def. 44 - Line, def. 46 - - =Contents=, Table of 24 - - =Contour=, def. 44 - - =Convergence=, def. 44 - - =Convex=, def. 44 - - =Copying Drawings=, Black Process 188 - Blue Printing 186 - Tracing 184 - - =Copyright= viii - - =Corner=, def. 44 - - =Corollary=, def. 83 - - =Co-secant of an Arc=, def. 99 - - =Co-sine of an Arc=, def. 99 - - =Co-tangent of an Arc=, def. 99 - - =Crane=, desc. 219 - Working drawing of, illus. 218 - - =Cross-Hatches=, def. 44 - - =Cross-hatching Drawings= 182 - - =Crown Wheel=, illus. 208 - - =Curve=, def. 44 - - =Curved Line=, def. 46 - - =Curved Lines=, Drawing, desc. 69 - Drawing Figures of 70, 72, 73 - How to Draw 35 - Illus. 70 - - =Curved Surface=, def. 49 - - =Curve or Scroll=, illus. 117 - - =Cut Gears=, desc. 215 - - =Cylinder=, def. 44 - - =Cylindrical=, def. 44 - - =Cylindrical Projection=, illus. 161 - - - =Dash Line=, def. 46 - - =Decimal Equivalents=, Table of 269 - - =Dedication= ix - - =Definitions=, Preliminary 41 - - =Degree=, def. 41, 44 - - =Describe=, def. 44 - - =Design=, def. 44 - Symmetry in, def. 50 - - =Designing Gears= 209 - - =Detail Drawings=, Office Rules for 191 - - =Develop=, def. 45 - - =Diagonal=, def. 45 - - =Diagonals of a Polygon=, def. 47 - - =Diameter=, def. 45 - - =Diameter=, Of a Circle 43 - - =Diameters of Wheels=, How to Measure 199 - - =Diametral Pitch=, desc. 200 - Of Gears 212 - - =Dimensioning Drawings= desc. 176, illus. 177, 179 - - =Dimension Line=, def. 46 - - =Dimensions on Drawings=, Office Rules for 192 - - =Dividers and Compasses=, desc. 119 - - =Dividers=, illus. 82, 119 - Bisecting, desc. 119 - Bow, illus. 122 - “Point” 242 - Proportional desc. 119, illus. 120 - Spring Bow, desc. 124 - - =Dodecahedron=, def. 48 - - =Dot-and-Dash Line=, def. 46 - - =Dotted Line=, def. 46 - - =Draughtsmen=, Useful Tables for 269-280 - - =Drawing=, Blackboard 28 - Free hand 55 - Linear Perspective 247 - Parallel Perspective 260-1 - Projection, desc. 148 - Scale Perspective 257 - Spur Gear, illus. 163, 211 - Spur Wheel, desc. 162 - Straight Line Figures desc. 65, illus. 66-7-8 - Symbols 193 - The Pitch Line 209 - To Scale, desc. 126 - Working, def. 51 - - =Drawing-Board= desc. 107, illus. 102, 106, 108 - Expansion and Contraction of 108 - How to Construct 107 - Trestles, illus. 110, 111 - - =Drawing Instruments=, desc. 103 - How to Select 104 - Illus. 105 - Outfit Recommended 104 - - =Drawing Materials=, desc. 103 - - =Drawing Office Rules= 191 - - =Drawing Paper=, desc. 132 - Erasing Lines 140 - Fixing of, illus. 102 - Fixing on the Board 139 - Pasting 184 - “Points” 243 - Patent Office Sizes 234 - Sizes of 133 - - =Drawing Pencils=, desc. and illus. 118 - How to Use 56 - - =Drawing Pen=, Filling with ink, illus. 130 - - =Drawing Pens=, desc. and illus. 129 - - =Drawing-Pins=, desc. 110 - - =Drawing Scales=, desc. 126 - - =Drawings=, Cleaning, desc. 169 - Color and Finish, note 185 - Dimensioning, desc. 176 - Inking in, desc. 167 - Lettering, desc. 171 - Patent Office Rules for 233 - Reproducing 186 - Section-Lining, desc. 182 - Shading desc. 180, illus. 180, 225 - Size of, Office Rules 191 - Tint and Color, desc. 184 - - =Drawing-Table=, desc. 111 - Folding Legs, illus. 104 - - - =Edge=, def. 45 - - =Elevation=, def. 45 - - =Elevation and Section=, Spur Wheel desc. 216, illus. 212 - - =Ellipse, An=, desc. 96, 118 - To describe when length and breadth are given 96 - - =Envelopes=, Portfolio, desc. 142 - - =Equiangular Triangle=, def. 45 - - =Equilateral Triangle=, def. 50 - - =Erasing=, “Points” on 242 - - =Eye=, illus. and desc. 253 - Effect of Light on 253 - - - =Face=, def. 45 - - =Faced Surfaces=, Points, etc. 242 - - =Figures=, Drawing Straight-line 65 - Numerals, examples of 173 - Straight-line, illus. 66 - - =File Handle=, desc. and illus. 144 - - =Finger and Thumb Lines=, illus. 64 - - =Finished Surfaces=, How to indicate 193 - “Points” 242 - - =Finishing=, def. 45 - - =Flanged-tooth Wheel=, desc. 205 - - =Flat Pattern=, def. 47 - - =Foreshortening=, def. 45 - - =Forward Projection= desc. 151, 152, illus. 155 - - =Free-hand=, def. 45 - - =Free-hand Drawing= 55, 78 - First Lesson in 30 - Penciling, illus. 54 - - =Free-hand Illustration=, a Water Wheel 78 - - =Friction-Clutch and Pulley=, desc. 224 - - =Friction Gear-Wheels=, desc. 201 - - =Full Line=, def. 46 - - - =Gear=, def. 199 - - =Gearing=, desc. 199 - Drawing desc. 162, illus. 163 - - =Gearing and Design= 197 - - =Gears=, A Train of, desc. 208 - Speed of 208 - - =Gear-Wheels=, Spur, illus. 198 - - =Generated=, def. 45 - - =Geometric=, def. 45 - - =Geometrical Axioms= 84 - - =Geometrical Drawing=, desc. 81 - Problems in 86 - - =Geometrical Signs= 84 - - =Geometry=, defs. 249 - Elements of 81 - - =Gothic Letters=, illus. 173 - - =Grooved Friction Wheels=, desc. 201 - - =Ground-Plane= def. 249, 255, illus. 249 - - - =Half-Tint=, def. 45 - - =Hand-Wheel=, illus. 77 - - =Hanger=, illus. 179 - - =Helical Wheel= desc. 199, illus. 207 - - =Hemisphere=, def. 45 - - =Heptagon=, def. 47 - - =Hexagon=, def. 47 - To Construct a 95 - - =Hexagon-Head Bolt=, illus. 144 - - =Hexahedron=, def. 48 - - =Horizontal=, def. 45, 250 - - =Horizontal Line=, in Drawing, illus. 250 - How to Draw 32 - In Perspective 252 - - =Hypothesis=, def. 83 - - - =Icosahedron=, def. 48 - - =India Ink=, desc. and illus. 131 - Dish or Tile, illus. 131 - - =India Rubber Eraser=, illus. 132 - Use of 240 - - =Ink=, Preparing, for Drawings, desc. 167 - Test for Good, desc. 167 - - =Ink Eraser=, Steel, desc. and illus. 132 - - =Inking=, illus. 166, 169 - Long Lines, illus. 170 - Rules of Procedure 168 - Short Work, illus. 169 - - “=Inking in=” Drawings, desc. 167 - “Points,” etc. 239, 243 - Patent Office Drawings 234 - - =Inscribe=, def. 45 - - =Instrumental=, def. 45 - - =Instruments= for Chalk-work, illus. 29 - - =Internal Gear=, desc. 201 - - =Internal-Gear Wheel=, illus. 207 - - =Introduction= 15 - - =Isosceles Triangle=, def. 50 - - - =Lantern-Wheel=, desc. 201 - - =Lathe-Dog=, illus. 76 - - =Lemma=, def. 83 - - =Lettering=, Blow-Off Valve, illus. 175 - Drawings, desc. 171 - - =Light=, and Sense of Seeing 254 - Experiment with, illus. 255 - Laws of 252 - - =Line=, def. 82 - To Divide into Equal Parts 89 - - =Linear Perspective Drawing= 247 - - =Lines=, def. 45 - Note 65 - Parallel, def. 83 - - =Link Motion=, Stephenson’s, illus. 225 - - =Longitudinal=, def. 46 - - =Lucas, Theo.=, Acknowledgement 23, 266 - - - =Marking Measurements= on Drawings 243 - - =Mechanical Drawing= 137, 247 - Elevation 138 - Examples 143 - Procedure 141 - - =Minerva=, Free-hand Sketch of iii - - =Miter-Wheel= desc. 199, 204, illus. 204 - - =Model=, def. 46 - - - =Nonagon=, def. 47 - - =Numbering= Drawings, Office Rules for 194-5 - - =Numerals=, illus. 173 - - - =Oblique=, def. 46 - - =Oblique Lines= How to Draw, 32, 58, illus. 59, 63 - - =Oblong=, def. 46 - - =Obtuse Angle=, def. 42 - - =Obtuse-Angled Triangle=, def. 50 - - =Octahedron=, def. 48 - - =Octagon=, def. 47 - To Describe on a given straight line 95 - To Inscribe in a circle 96 - - =Oil Can=, illus. 77 - - =Optic Nerve=, illus. 253 - - =Optics=, in Drawing, def. 252 - - =Outline Picture=, desc. 152 - - =Oval=, def. 46 - How to Draw an 71 - - =Overall=, def. 46 - - - =Paper=, Fastening Drawing on 184 - Rule or Scale 242 - Sensitized, desc. 188 - The Right Side of 241 - - =Parallel=, def. 46 - - =Parallel Lines=, def. 83, 252 - To Draw 88 - In Perspective 251 - - =Parallel Perspective Drawing=, illus. 260 to 263 - - =Parallel Rule= desc. 115, illus. 114-5 - - =Parallelogram=, def. 47 - To Construct 93 - - =Pasting Drawing Paper=, “Points” 243 - - =Patent Office Drawings= 235, illus. 236 - Rules of Great Britain 236 - Rules of U. S. 233 - - =Patterns=, def. 46 - Numbering, from drawings 194 - - =Pedestal=, illus. 178-9 - - =Pen=, Hand holding, illus. 166, 169, 170 - - =Pencil=, Function of a 142 - How to Cut, illus. 57 - How to Hold, illus. 54, 59, 60 - How to Use 56 - - =Pencil-Compasses=, desc. 143 - How to Hold 143 - - =Penciling=, desc. and illus. 139 - “Points” 143, 240 - - =Pencil Lines=, How to Make 119 - - =Pencils=, Sharpening Points of 143, 241 - - =Penknife=, illus. 52 - - =Pens=, Drawing, illus. 129 - Lettering and Figuring, illus. 172 - - =Pentagon=, def. 47 - To Inscribe in a circle 94 - - =Perimeter=, def. 47 - Of a Polygon, def. 47 - - =Periphery of a Wheel=, def. 200 - - =Perpendicular=, def. 47, 252 - - =Perpendicular Lines=, How to Draw 31, 61, 62 - - =Perrott, Geo.=, Acknowledgement 23, 266 - - =Personal=, Note from the Author 266 - - =Perspective Drawing= def. 47, illus. 250 - Definitions of Terms used in 249 - Geometrical Terms used in 248 - Of a Bridge, illus. 249 - Scale or Approximate 257 - Vanishing Point, illus. 251 - Water Reflection, illus. 246 - - =Perspective=, Linear, def. 247 - - =Perspective Plane=, def. 250 - - =Picture Plane=, desc. 255 - In Drawing, illus. 249, 250 - In Perspective, illus. 258 - - =Pinion-Wheel=, desc. 201 - - =Piston Rod=, desc. 223 - - =Pitch Circle= in Gearing 200 - - =Pitch Line=, Drawing the 209 - In Gearing 200 - - =Plan=, def. 47 - - =Plan of the Work= 21 - - =Plane=, in Perspective, def. 249 - - =Plane of the Picture=, def. 250 - - =Plane Surface=, def. 49 - - =Point=, def. 82 - - =Point of Sight=, in Perspective Drawing 251 - - =Points=, relating to Chalk Drawings 36 - To be observed in Sketching 141-2 - Useful Hints and 170, 239 - - =Polygon=, def. 47 - - =Polyhedron=, def. 48 - - =Postulate=, def. 83 - - =Pounce=, How to Use, desc. 170, 186 - - =Preface= 13 - - =Preparatory Practice= in Drawing 30 - - =Prism=, def. 49 - - =Problems=, def. 83 - Geometrical 86 - - =Produce=, def. 49 - - =Profile=, def. 49 - - =Projection=, Backward, illus. 153-4 - Def. 49 - Cylindrical Outline, desc. 159 - Cylindrical Surface, illus. 161 - Forward desc. 152, illus. 155 - Hexagon Nut, illus. 160 - Marking Dimensions 150 - Lines of Sight 150 - Scaling and Measuring in 149 - Sight-Lines, illus. 151 - Sloping Surface, desc. 159 - Spur-Wheel, desc. 162 - - =Projection Drawing=, desc. 148 - Illus. 149, 151, 153, 154, 155, 157, 158, 160, 161, 163 - Principles of 148 - Spur-Wheel, illus. 163, 212 - - =Proportional Dividers=, illus. 120 - - =Proportions= of Teeth of Wheels 210 - - =Proposition=, def. 83 - - =Protractor=, desc. 128 - - =Pulley and Friction Clutch=, illus. 224 - - =Punching Press= illus. 222, desc. 223 - - - =Quadrant=, def. 49 - - =Quadrilateral=, def. 47 - - =Quadrisect=, def. 49 - - - =Rack and Pinion=, desc. 205 - - =Radius of a Circle= 43 - - =Reading Working Drawings=, desc. 229 - - =Rectangle=, def. 48 - To Construct a 92 - - =Reproducing Drawings=, desc. 186 - - =Reverse Curve=, def. 44 - - =Rhomboid=, def. 48 - - =Rhombus=, def. 48 - - =Right-Angle=, def. 42 - Triangle, def. 50 - - =Robinson, A. W., M. E.=, note, Office Rules 191 - - =Rolling-Circle= in Gear-Wheel 200 - - =Rule=, Area of a Circle, To find the 271 - Circumference of a Circle, To find the 271 - Cylinder, To find the contents of a 271 - Diameter of a Circle, To find the 271 - Illus. 82 - Inscribed Square, To find side of an 271 - Parallelogram, To find the area of a 271 - Pyramid or Cone, To find the contents of a 271 - Radius of a circle, To find the 271 - Sphere, To find the contents of a 271 - Square, To find the side of an equal 271 - Trapezoid, To find the area of a 271 - Triangle, To find the area of a 271 - Two-foot desc. 127, 128, illus. 128 - Wedge, To find the contents of a 271 - - =Rules= for Drawing Office 191 - Wheels, To find proportions of 209 - - - =Sand Paper=, Removing surface of paper 168 - - =Scale=, Drawing to, desc. 126 - - =Scale Drawings=, To read 230 - - =Scale=, Flat, illus. 127 - Triangular, illus. 127 - - =Scalene Triangle=, def. 50 - - =Scale or Approximate Perspective= 257 - - =Scale Rule=, for Proportions of Teeth 214 - - =Scales=, Drawing, desc. 126 - - =Scholium=, def. 83 - - =Screw-Thread=, U. S. Standard Gauge 280 - - =Scroll or Curve=, desc. 117 - Universal Curve, illus. 134 - - =Secant of an Arc= 99 - - =Section=, def. 49 - Drawing illus. 163, desc. 160 - - =Sectional=, def. 49 - - =Section-Liner=, illus. 116 - - =Section Lines= in Drawings 240 - - =Section-Lining=, Cast-iron, etc., illus. 182 - Cog-Wheel, illus. 183 - - =Section-Lining Drawings= desc. 182, illus. 183 - Wheel Hub, illus. 184 - - =Selecting Drawing Instruments= 103, 240 - - =Semi-Circle=, def. 43 - - =Sensitized Paper=, desc. 188 - - =Set-Square=, illus. 102, 114 - - =Shading Curves=, illus. 181 - - =Shading Drawings= 180 - - =Shadow=, def. 49 - - =Shadow Line=, def. 46 - - =Shadow Lines=, “Points” 241 - - =Sharpening Pencils= 57 - - =Shop Drawings=, Office Rules 192 - - =Sight=, Point of, in Perspective Drawing 252 - Sense of 254 - - =Sight Lines= in Projection, illus. 157 - - =Sine= of an Arc 99 - - =Skew-Gearing=, desc. 203 - - =Sketch Books=, desc. 142 - Office Practice 194 - - =Sketches=, details 142 - - =Sketch=, Free-hand, Advantage of 55 - - =Sketching= desc. 141, note 17 - Points to be observed in 141-2 - - =Sloping Surface= in Projection desc. 159, illus. 166 - - =Solid=, def. 49, 83 - - =Solid Pattern=, def. 47 - - =Speed of Gears= 208 - - =Sphere=, def. 49 - - =Spiral Curve=, def. 44 - - =Spring Bows= illus. 122, 123, desc. 124 - - =Spur-Gear= desc. 201, illus. 211 - - =Spur Mortise-Wheel=, illus. 202 - - =Spur-Wheel=, desc. 199, 216 - How to Draw 209 - Illus. 198 - Projection desc. 162, illus. 163 - Teeth of cast-iron, desc. 202 - - =Square=, def. 48 - To Convert into an Octagon 95 - To Describe about a Circle 94 - To Inscribe in a Circle 93 - - =Standards=, for U. S. 278 - Office Rules for 193 - - =Steady Rest=, Scale, illus. 228 - - =Straight Line=, def. 46 - To Draw a Perpendicular to a 86 - Drawing Figures of 66-7-8 - How to Draw a 57, 59 - To Bisect a 86 - - =Steel=, Section-Lining, illus. 182 - - =Steel Gears=, Economy of 216 - - =Surface=, def. 49, 82 - - =Symbols=, representing Materials 193 - - - =Table= of Areas of Circles 273-277 - Bolts, Standard Sizes of 280 - Circular Measure 272 - Circumferences of Circles 273-277 - Contents 24 - Decimal Equivalents 269 - Diameters of Circles 273-277 - Land Measure 272 - Metric Equivalents 270 - Pipe, Standard Sizes of Welded 279 - Roman Figures 272 - Solid Measure 272 - Wire Gauges 278 - Useful for Draughtsmen 266-280 - - =Tangent= of an Arc, def. 99 - To Draw a, to a Circle 91 - - =Tee-Iron=, illus. 75 - - =Tee-Square=, Adjustable, desc. and illus. 113 - Desc. 112 - How to Use, illus. 111, 147 - Illus. 102, 112 - Points about 242 - - =Teeth in Bevel Gears=, desc. 204 - - =Terms and Definitions=, Preliminary 41 - - =Test-Pieces=, Use of, in Blue Prints 188 - - =Tetrahedron=, def. 48 - - =Theorem=, def. 83 - - =Thumb-Tack= illus. 109, desc. 110 - - =Tints and Colors=, desc. 184 - - =Title and Date=, on Sketches 142 - - =Title, Date, Scale, etc.=, Office Rules for 192 - - =Title Page= vii - - =Tracing-Cloth=, desc. 186 - - =Tracings=, Office Rules for Keeping 195 - Tinted and Shaded, desc. 184 - - =Trammels=, desc. and illus. 125 - - =Trapezium=, def. 48 - - =Trapezoid=, def. 48 - - =Trestles=, Drawing-Board, desc. and illus. 110 - - =Triangle=, def. 50 - To Describe a Circle about a 93 - - =Triangle, or Set-Square=, desc. and illus. 114 - How to Use desc. 147, illus. 166 - - =Triangles=, illus. 102 - To Construct 92 - - =Trigonometry=, principles and def. 98 - - =Trisect=, def. 50 - - =Trundle Wheel= desc. 201, illus. 208 - - =Two-foot Rule=, illus. 128 - - - =U. S. Standards=, Pipes 279 - - =Upright Lines=, How to Draw 61 - - =Useful Tables for Draughtsmen= 269-280 - - - =Valve=, Blow-off desc. 174, illus. 175 - - =Valve Gear=, or Link Motion, illus. 225 - - =Vanishing Point=, def. and illus. 251 - In Drawing, illus. 250 - In Perspective Drawing 252 - - =Varnish=, Shellac, for Drawings 241 - - =Versed Sine= of an Arc 99 - - =Vertex=, def. 51 - Of an Angle, def. 42 - - =Vertical=, def. 51, 251 - - =Vertical Lines=, in Perspective 257 - - =Vertical-Plane=, def. 249 - - =View=, def. 51 - - =Visual Ray= in Perspective Drawing 256 - - =Visual Rays of Light= desc. 252, illus. 255 - - =Vulcanite=, Section-Lining, illus. 182 - - - =Water Reflection= in Perspective Drawing, illus. 246 - - =Wheel=, Bevel, A, illus. 203 - Crown, illus. 208 - Helical, A, illus. 207 - Hub, Section-Lining, illus. 184 - Internal Gear, desc. 201, 207 - Miter, A, illus. 204 - Proportions of the Teeth of a 210 - Spur illus. 198, desc. 199, 201 - Worm, desc. 201 - - =Wood=, Section-Lining, illus. 182 - - =Working Drawing=, Bending Machine 220-1 - Def. 51 - Illus. 218, 220, 221, 222, 223, 224, 225, 226, 228 - Bumping Post, illus. 226 - Points, etc. 243 - Power Punching Press 222 - Numbering a, Office Rules for 195 - To Read a 229 - - =Working Drawings=, desc. 219, 227 - - =Worm-Gear=, desc. 206 - - =Worm-Wheel= desc. 201, illus. 206 - Speed of a 216 - - =Wrench=, illus. 75 - - =Wrist-Lines=, illus. 64 - - =Wrought-Iron=, Section-Lining, illus. 182 - - - - -Transcriber’s Notes - - - Inconsistent and unusual spelling, capitalisation and hyphenation have - been retained, unless mentioned below. The discrepancies between the - General List of Contents and the structure of the text have not been - corrected. - - Depending on the hard- and software used to read this text and their - settings, not all elements may display as intended. Where scales are - given for illustrations, these can, of course, not be relied upon for - measurements. - - The numbering of illustrations in the book is inconsistent. - Illustrations that have no numbered captions may or may not be - counted; this has not been standardised, except as listed below. - Missing illustration numbers have been added only where they are - referenced in the text. The illustrations referred to in the text as - Figs. 242 and 243 are captioned Fig. 243 and 244. - - Page 65-69 and Figs. 66-71: the text uses upper case reference - letters, the illustrations lower case, which has not been - standardised. - - Page 84, table of symbols: the source document uses letters (O and L) - rather than symbols for circle and angle. - - Page 94, Bisect two of the angles _A C_ of the triangle: presumably - the unmarked point A is in the lower left-hand corner of the - illustration. - - Page 113, The tee-square, as shown, ...: there is no illustration with - the relevant reference numbers; probably the reference is to Fig. - 151/152. - - Page 239, rough irregular lines, as in fig. 134, on page 131: there is - no Fig. 134 on page 131; page 134 nor page 131 show the rough - irregular lines. Several other illustrations in the book do show such - lines. - - Index: the order of entries is as printed in the source document. - - - Changes made: - - Illustrations and Notes have been moved out of text paragraphs. - - Some obvious minor punctuation and typographical errors have been - corrected silently. - - In some tables the ditto symbol („) has been replaced with the dittoed - text; some tables have been split or re-arranged. The use of × and x - in multiplications and dimensions has been standardised to ×. - - Page 48: Figure numbers 45-49 added to illustration. - - Page 89: and on _B_ on _B I_ changed to and on _B_ on _B D_. - - Page 177: D = diam. of collar changed to d = diam. of collar. - - Page 193: Bbt.--Babbit. changed to Bbt.--Babbitt. - - Page 203: as described on page 191 changed to as described on page - 199. - - Page 214: 4 tenths measured at the 2′ line changed to 4 tenths - measured at the 2″ line. - -*** END OF THE PROJECT GUTENBERG EBOOK SELF-HELP MECHANICAL -DRAWING *** - -Updated editions will replace the previous one--the old editions will -be renamed. - -Creating the works from print editions not protected by U.S. copyright -law means that no one owns a United States copyright in these works, -so the Foundation (and you!) can copy and distribute it in the -United States without permission and without paying copyright -royalties. Special rules, set forth in the General Terms of Use part -of this license, apply to copying and distributing Project -Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm -concept and trademark. Project Gutenberg is a registered trademark, -and may not be used if you charge for an eBook, except by following -the terms of the trademark license, including paying royalties for use -of the Project Gutenberg trademark. If you do not charge anything for -copies of this eBook, complying with the trademark license is very -easy. You may use this eBook for nearly any purpose such as creation -of derivative works, reports, performances and research. Project -Gutenberg eBooks may be modified and printed and given away--you may -do practically ANYTHING in the United States with eBooks not protected -by U.S. copyright law. Redistribution is subject to the trademark -license, especially commercial redistribution. - -START: FULL LICENSE - -THE FULL PROJECT GUTENBERG LICENSE -PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK - -To protect the Project Gutenberg-tm mission of promoting the free -distribution of electronic works, by using or distributing this work -(or any other work associated in any way with the phrase "Project -Gutenberg"), you agree to comply with all the terms of the Full -Project Gutenberg-tm License available with this file or online at -www.gutenberg.org/license. - -Section 1. General Terms of Use and Redistributing Project -Gutenberg-tm electronic works - -1.A. By reading or using any part of this Project Gutenberg-tm -electronic work, you indicate that you have read, understand, agree to -and accept all the terms of this license and intellectual property -(trademark/copyright) agreement. If you do not agree to abide by all -the terms of this agreement, you must cease using and return or -destroy all copies of Project Gutenberg-tm electronic works in your -possession. If you paid a fee for obtaining a copy of or access to a -Project Gutenberg-tm electronic work and you do not agree to be bound -by the terms of this agreement, you may obtain a refund from the -person or entity to whom you paid the fee as set forth in paragraph -1.E.8. - -1.B. "Project Gutenberg" is a registered trademark. It may only be -used on or associated in any way with an electronic work by people who -agree to be bound by the terms of this agreement. There are a few -things that you can do with most Project Gutenberg-tm electronic works -even without complying with the full terms of this agreement. See -paragraph 1.C below. There are a lot of things you can do with Project -Gutenberg-tm electronic works if you follow the terms of this -agreement and help preserve free future access to Project Gutenberg-tm -electronic works. See paragraph 1.E below. - -1.C. The Project Gutenberg Literary Archive Foundation ("the -Foundation" or PGLAF), owns a compilation copyright in the collection -of Project Gutenberg-tm electronic works. Nearly all the individual -works in the collection are in the public domain in the United -States. If an individual work is unprotected by copyright law in the -United States and you are located in the United States, we do not -claim a right to prevent you from copying, distributing, performing, -displaying or creating derivative works based on the work as long as -all references to Project Gutenberg are removed. Of course, we hope -that you will support the Project Gutenberg-tm mission of promoting -free access to electronic works by freely sharing Project Gutenberg-tm -works in compliance with the terms of this agreement for keeping the -Project Gutenberg-tm name associated with the work. You can easily -comply with the terms of this agreement by keeping this work in the -same format with its attached full Project Gutenberg-tm License when -you share it without charge with others. - -1.D. The copyright laws of the place where you are located also govern -what you can do with this work. Copyright laws in most countries are -in a constant state of change. If you are outside the United States, -check the laws of your country in addition to the terms of this -agreement before downloading, copying, displaying, performing, -distributing or creating derivative works based on this work or any -other Project Gutenberg-tm work. The Foundation makes no -representations concerning the copyright status of any work in any -country other than the United States. - -1.E. Unless you have removed all references to Project Gutenberg: - -1.E.1. The following sentence, with active links to, or other -immediate access to, the full Project Gutenberg-tm License must appear -prominently whenever any copy of a Project Gutenberg-tm work (any work -on which the phrase "Project Gutenberg" appears, or with which the -phrase "Project Gutenberg" is associated) is accessed, displayed, -performed, viewed, copied or distributed: - - This eBook is for the use of anyone anywhere in the United States and - most other parts of the world at no cost and with almost no - restrictions whatsoever. You may copy it, give it away or re-use it - under the terms of the Project Gutenberg License included with this - eBook or online at www.gutenberg.org. If you are not located in the - United States, you will have to check the laws of the country where - you are located before using this eBook. - -1.E.2. If an individual Project Gutenberg-tm electronic work is -derived from texts not protected by U.S. copyright law (does not -contain a notice indicating that it is posted with permission of the -copyright holder), the work can be copied and distributed to anyone in -the United States without paying any fees or charges. If you are -redistributing or providing access to a work with the phrase "Project -Gutenberg" associated with or appearing on the work, you must comply -either with the requirements of paragraphs 1.E.1 through 1.E.7 or -obtain permission for the use of the work and the Project Gutenberg-tm -trademark as set forth in paragraphs 1.E.8 or 1.E.9. - -1.E.3. If an individual Project Gutenberg-tm electronic work is posted -with the permission of the copyright holder, your use and distribution -must comply with both paragraphs 1.E.1 through 1.E.7 and any -additional terms imposed by the copyright holder. Additional terms -will be linked to the Project Gutenberg-tm License for all works -posted with the permission of the copyright holder found at the -beginning of this work. - -1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm -License terms from this work, or any files containing a part of this -work or any other work associated with Project Gutenberg-tm. - -1.E.5. Do not copy, display, perform, distribute or redistribute this -electronic work, or any part of this electronic work, without -prominently displaying the sentence set forth in paragraph 1.E.1 with -active links or immediate access to the full terms of the Project -Gutenberg-tm License. - -1.E.6. You may convert to and distribute this work in any binary, -compressed, marked up, nonproprietary or proprietary form, including -any word processing or hypertext form. However, if you provide access -to or distribute copies of a Project Gutenberg-tm work in a format -other than "Plain Vanilla ASCII" or other format used in the official -version posted on the official Project Gutenberg-tm website -(www.gutenberg.org), you must, at no additional cost, fee or expense -to the user, provide a copy, a means of exporting a copy, or a means -of obtaining a copy upon request, of the work in its original "Plain -Vanilla ASCII" or other form. Any alternate format must include the -full Project Gutenberg-tm License as specified in paragraph 1.E.1. - -1.E.7. Do not charge a fee for access to, viewing, displaying, -performing, copying or distributing any Project Gutenberg-tm works -unless you comply with paragraph 1.E.8 or 1.E.9. - -1.E.8. You may charge a reasonable fee for copies of or providing -access to or distributing Project Gutenberg-tm electronic works -provided that: - -* You pay a royalty fee of 20% of the gross profits you derive from - the use of Project Gutenberg-tm works calculated using the method - you already use to calculate your applicable taxes. The fee is owed - to the owner of the Project Gutenberg-tm trademark, but he has - agreed to donate royalties under this paragraph to the Project - Gutenberg Literary Archive Foundation. Royalty payments must be paid - within 60 days following each date on which you prepare (or are - legally required to prepare) your periodic tax returns. Royalty - payments should be clearly marked as such and sent to the Project - Gutenberg Literary Archive Foundation at the address specified in - Section 4, "Information about donations to the Project Gutenberg - Literary Archive Foundation." - -* You provide a full refund of any money paid by a user who notifies - you in writing (or by e-mail) within 30 days of receipt that s/he - does not agree to the terms of the full Project Gutenberg-tm - License. You must require such a user to return or destroy all - copies of the works possessed in a physical medium and discontinue - all use of and all access to other copies of Project Gutenberg-tm - works. - -* You provide, in accordance with paragraph 1.F.3, a full refund of - any money paid for a work or a replacement copy, if a defect in the - electronic work is discovered and reported to you within 90 days of - receipt of the work. - -* You comply with all other terms of this agreement for free - distribution of Project Gutenberg-tm works. - -1.E.9. If you wish to charge a fee or distribute a Project -Gutenberg-tm electronic work or group of works on different terms than -are set forth in this agreement, you must obtain permission in writing -from the Project Gutenberg Literary Archive Foundation, the manager of -the Project Gutenberg-tm trademark. Contact the Foundation as set -forth in Section 3 below. - -1.F. - -1.F.1. Project Gutenberg volunteers and employees expend considerable -effort to identify, do copyright research on, transcribe and proofread -works not protected by U.S. copyright law in creating the Project -Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm -electronic works, and the medium on which they may be stored, may -contain "Defects," such as, but not limited to, incomplete, inaccurate -or corrupt data, transcription errors, a copyright or other -intellectual property infringement, a defective or damaged disk or -other medium, a computer virus, or computer codes that damage or -cannot be read by your equipment. - -1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right -of Replacement or Refund" described in paragraph 1.F.3, the Project -Gutenberg Literary Archive Foundation, the owner of the Project -Gutenberg-tm trademark, and any other party distributing a Project -Gutenberg-tm electronic work under this agreement, disclaim all -liability to you for damages, costs and expenses, including legal -fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT -LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE -PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE -TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE -LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR -INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH -DAMAGE. - -1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a -defect in this electronic work within 90 days of receiving it, you can -receive a refund of the money (if any) you paid for it by sending a -written explanation to the person you received the work from. If you -received the work on a physical medium, you must return the medium -with your written explanation. The person or entity that provided you -with the defective work may elect to provide a replacement copy in -lieu of a refund. If you received the work electronically, the person -or entity providing it to you may choose to give you a second -opportunity to receive the work electronically in lieu of a refund. If -the second copy is also defective, you may demand a refund in writing -without further opportunities to fix the problem. - -1.F.4. Except for the limited right of replacement or refund set forth -in paragraph 1.F.3, this work is provided to you 'AS-IS', WITH NO -OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT -LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. - -1.F.5. Some states do not allow disclaimers of certain implied -warranties or the exclusion or limitation of certain types of -damages. If any disclaimer or limitation set forth in this agreement -violates the law of the state applicable to this agreement, the -agreement shall be interpreted to make the maximum disclaimer or -limitation permitted by the applicable state law. The invalidity or -unenforceability of any provision of this agreement shall not void the -remaining provisions. - -1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the -trademark owner, any agent or employee of the Foundation, anyone -providing copies of Project Gutenberg-tm electronic works in -accordance with this agreement, and any volunteers associated with the -production, promotion and distribution of Project Gutenberg-tm -electronic works, harmless from all liability, costs and expenses, -including legal fees, that arise directly or indirectly from any of -the following which you do or cause to occur: (a) distribution of this -or any Project Gutenberg-tm work, (b) alteration, modification, or -additions or deletions to any Project Gutenberg-tm work, and (c) any -Defect you cause. - -Section 2. Information about the Mission of Project Gutenberg-tm - -Project Gutenberg-tm is synonymous with the free distribution of -electronic works in formats readable by the widest variety of -computers including obsolete, old, middle-aged and new computers. It -exists because of the efforts of hundreds of volunteers and donations -from people in all walks of life. - -Volunteers and financial support to provide volunteers with the -assistance they need are critical to reaching Project Gutenberg-tm's -goals and ensuring that the Project Gutenberg-tm collection will -remain freely available for generations to come. In 2001, the Project -Gutenberg Literary Archive Foundation was created to provide a secure -and permanent future for Project Gutenberg-tm and future -generations. To learn more about the Project Gutenberg Literary -Archive Foundation and how your efforts and donations can help, see -Sections 3 and 4 and the Foundation information page at -www.gutenberg.org - -Section 3. Information about the Project Gutenberg Literary -Archive Foundation - -The Project Gutenberg Literary Archive Foundation is a non-profit -501(c)(3) educational corporation organized under the laws of the -state of Mississippi and granted tax exempt status by the Internal -Revenue Service. The Foundation's EIN or federal tax identification -number is 64-6221541. Contributions to the Project Gutenberg Literary -Archive Foundation are tax deductible to the full extent permitted by -U.S. federal laws and your state's laws. - -The Foundation's business office is located at 809 North 1500 West, -Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up -to date contact information can be found at the Foundation's website -and official page at www.gutenberg.org/contact - -Section 4. Information about Donations to the Project Gutenberg -Literary Archive Foundation - -Project Gutenberg-tm depends upon and cannot survive without -widespread public support and donations to carry out its mission of -increasing the number of public domain and licensed works that can be -freely distributed in machine-readable form accessible by the widest -array of equipment including outdated equipment. Many small donations -($1 to $5,000) are particularly important to maintaining tax exempt -status with the IRS. - -The Foundation is committed to complying with the laws regulating -charities and charitable donations in all 50 states of the United -States. Compliance requirements are not uniform and it takes a -considerable effort, much paperwork and many fees to meet and keep up -with these requirements. We do not solicit donations in locations -where we have not received written confirmation of compliance. To SEND -DONATIONS or determine the status of compliance for any particular -state visit www.gutenberg.org/donate - -While we cannot and do not solicit contributions from states where we -have not met the solicitation requirements, we know of no prohibition -against accepting unsolicited donations from donors in such states who -approach us with offers to donate. - -International donations are gratefully accepted, but we cannot make -any statements concerning tax treatment of donations received from -outside the United States. U.S. laws alone swamp our small staff. - -Please check the Project Gutenberg web pages for current donation -methods and addresses. Donations are accepted in a number of other -ways including checks, online payments and credit card donations. To -donate, please visit: www.gutenberg.org/donate - -Section 5. General Information About Project Gutenberg-tm electronic works - -Professor Michael S. Hart was the originator of the Project -Gutenberg-tm concept of a library of electronic works that could be -freely shared with anyone. For forty years, he produced and -distributed Project Gutenberg-tm eBooks with only a loose network of -volunteer support. - -Project Gutenberg-tm eBooks are often created from several printed -editions, all of which are confirmed as not protected by copyright in -the U.S. unless a copyright notice is included. Thus, we do not -necessarily keep eBooks in compliance with any particular paper -edition. - -Most people start at our website which has the main PG search -facility: www.gutenberg.org - -This website includes information about Project Gutenberg-tm, -including how to make donations to the Project Gutenberg Literary -Archive Foundation, how to help produce our new eBooks, and how to -subscribe to our email newsletter to hear about new eBooks. diff --git a/old/67166-0.zip b/old/67166-0.zip Binary files differdeleted file mode 100644 index 4182c5e..0000000 --- a/old/67166-0.zip +++ /dev/null diff --git a/old/67166-h.zip b/old/67166-h.zip Binary files differdeleted file mode 100644 index c1b7fe2..0000000 --- a/old/67166-h.zip +++ /dev/null diff --git a/old/67166-h/67166-h.htm b/old/67166-h/67166-h.htm deleted file mode 100644 index 09e5286..0000000 --- a/old/67166-h/67166-h.htm +++ /dev/null @@ -1,18783 +0,0 @@ -<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" - "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> -<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> - <head> - <meta http-equiv="Content-Type" content="text/html;charset=utf-8" /> - <meta http-equiv="Content-Style-Type" content="text/css" /> - <title> - Self-Help Mechanical Drawing, an Educational Treatise, by N. Hawkins--a Project Gutenberg eBook. - </title> - - <link rel="coverpage" href="images/cover.jpg" /> - - <style type="text/css"> - - a - {text-decoration: none;} - a:hover - {text-decoration: underline;} - .allclear - {clear: both;} - .ballard - {text-align: center; margin: 2.5em auto;} - .ballard p - {display: inline-block; text-indent: 0; line-height: 1.5em; word-spacing: .3em;} - .bb - {border-bottom: solid thin;} - .bbd - {border-bottom: double;} - .bl - {border-left: solid thin;} - .bld - {border-left: double;} - body - {margin-left: 10%; margin-right: 10%; max-width: 65em;} - .bot - {vertical-align: bottom;} - .br - {border-right: solid thin;} - .brd - {border-right: double;} - .bt - {border-top: solid thin;} - .btd - {border-top: double;} - .caption - {font-size: .8em; text-align: center; text-indent: 0;} - .caption .material - {font-size: .9em; line-height: 1.5em;} - .center - {text-align: center; text-indent: 0;} - .centerblock - {text-align: center; margin: 0 auto;} - .centerblock p - {display: inline-block; text-indent: 0;} - .chapter - {page-break-before: always;} - .container - {margin: 1.5em auto; padding: 0; text-align: center; max-width: 100%; page-break-inside: avoid;} - .container.leftfloat - {float: left; margin: .75em .75em .75em 0; padding: 0; text-align: left;} - .x-ebookmaker .container.leftfloat {float: left;} - .container.leftfloat.nomargin - {margin: 0 .75em 0 0;} - .container.nomargin - {margin: 0 auto; padding: 0;} - .container.rightfloat - {float: right; margin: .75em 0 .75em .75em; padding: 0; text-align: right;} - .x-ebookmaker .container.rightfloat {float: right;} - .container.rightfloat.nomargin - {margin: 0 0 0 .75em;} - .container.w03em - {width: 3em;} - .container.w05em - {width: 5em;} - .container.w07em - {width: 7.5em;} - .container.w10em - {width: 10em;} - .container.w12em - {width: 12em;} - .container.w15em - {width: 15em;} - .container.w20em - {width: 20em;} - .container.w25em - {width: 25em;} - .container.w30em - {width: 30em;} - .container.w35em - {width: 35em;} - .container.w40em - {width: 40em;} - .container.w45em - {width: 45em;} - .container.w50em - {width: 50em;} - .definitions - {margin-top: .75em; margin-bottom: .75em;} - .definitions .container - {margin-top: .1em; margin-bottom: .1em;} - .definitions .container.leftfloat - {margin-right: 2.5em;} - .definitions p.level0 - {text-indent: -2em; margin-left: 2em; margin-top: .5em;} - .definitions p.level1 - {text-indent: 2em; margin-left: 2em;} - .diagonalp - {text-align: center; margin: .75em auto;} - .diagonalp p - {display: inline-block; text-indent: 0; line-height: 1.5em;} - .dontshow - {visibility: hidden;} - .fig239 - {display: inline-block; vertical-align: middle; text-align: center; white-space: nowrap; padding: 0; text-indent: 0;} - .fig239 .bot - {padding: 0 .25em; display: block; vertical-align: top; text-indent: 0; font-size: .8em;} - .fig239 .top - {padding: 0 .25em; display: block; vertical-align: bottom; text-indent: 0; height: auto; width: 12.5em;} - .fnanchor - {vertical-align: top; font-size: .7em; text-decoration: none; white-space: nowrap;} - .footnote - {margin: .75em 0 .75em 4em; font-size: .9em;} - .x-ebookmaker .footnote {margin-left: 1em;} - .footnote .label - {float: left; font-size: .8em; vertical-align: top; margin: 0; text-indent: -4em; padding: 0;} - .footnote p - {margin-top: .25em; margin-bottom: 0; margin-left: 1em; text-indent: -1em; line-height: .95em;} - .x-ebookmaker .footnote .label {float: none; margin-left: 1em; text-indent: 0;} - .fsize70 - {font-size: .7em;} - .fsize80 - {font-size: .8em;} - .fsize90 - {font-size: .9em;} - .fsize125 - {font-size: 1.25em;} - .fsize150 - {font-size: 1.5em;} - .fsize175 - {font-size: 1.75em;} - .fsize300 - {font-size: 3em;} - .gesp1 - {letter-spacing: .1em; margin-right: -.1em;} - .gesp2 - {letter-spacing: .2em; margin-right: -.2em;} - h1, - h2, - h3, - h4 - {text-align: center;} - h1 - {font-size: 2em; line-height: 2.5em; font-weight: normal; margin-top: 4em; margin-bottom: 4em;} - h2 - {font-size: 1.75em;} - h2 .fnanchor - {font-size: .5em;} - h2 .high - {line-height: 3em;} - h2.nobreak - {page-break-before: avoid;} - h3, - h4 - {text-align: left; text-indent: 0; font-weight: bold; margin-top: 1.5em; margin-bottom: 0; font-size: 1em;} - h3.center - {text-align: center; font-size: 1.1em;} - .horsplit - {display: inline-block; vertical-align: middle; text-align: center; white-space: nowrap; padding: 0; text-indent: 0; - font-size: 70%;} - .horsplit .bot - {padding: 0 .25em; display: block; vertical-align: top; text-indent: 0;} - .horsplit .top - {border-bottom: solid thin; padding: 0 .25em; display: block; vertical-align: bottom; text-indent: 0;} - .horsplit .top.noline - {border-bottom: none;} - hr - {width: 34%; margin: 2em 33%; color: black; clear: none;} - hr.chap - {width: 26%; margin: 3em 37%;} - hr.full - {width: 100%; margin: 2em 0; clear: both;} - img - {max-width: 100%; height: auto;} - img.inline - {padding: 0 .1em; margin: 0; vertical-align: middle;} - img.inline.h2em - {height: 2em; width: auto;} - img.inline.h3em - {height: 3em; width: auto;} - .noscr - {display: none;} - .x-ebookmaker .noscr {display: block;} - .note - {margin: .75em 0; font-size: .9em;} - .note p - {margin-top: .25em; margin-bottom: 0; text-indent: 1.5em;} - .nowrap - {white-space: nowrap; display: inline-block; text-indent: 0;} - p - {margin-top: 0; text-align: justify; margin-bottom: 0; text-indent: 2em;} - p.blankafter2 - {margin-bottom: 2em;} - p.blankbefore75 - {margin-top: .75em;} - p.blankbefore2 - {margin-top: 2em;} - p.center - {text-align: center; text-indent: 0;} - p.findwhat - {text-align: left; text-indent: 0; font-size: .8em;} - p.fingerlines - {text-indent: 0; text-align: center; font-size: .9em;} - p.highline15 - {line-height: 1.5em;} - p.highline2 - {line-height: 2em;} - p.highline4 - {line-height: 4em;} - p.hind05 - {text-indent: -2.5em; margin-left: 2.5em;} - p.noindent - {text-indent: 0;} - p.tabhead - {text-align: center; text-indent: 0; margin-top: .75em; margin-bottom: .75em; font-size: .9em;} - p.thinline - {line-height: .001em;} - p.wristlines - {text-indent: 0; text-align: center; font-size: .9em; line-height: .8em; margin-top: 2em;} - .padl1 - {padding-left: .5em;} - .padl2 - {padding-left: 1em;} - .padl3 - {padding-left: 1.5em;} - .padl4 - {padding-left: 2em;} - .padl6 - {padding-left: 3em;} - .padl8 - {padding-left: 4em;} - .padl12 - {padding-left: 6em;} - .padl16 - {padding-left: 8em;} - .padr6 - {padding-right: 3em;} - .pagenum - {position: absolute; right: 2%; font-size: .75em; text-align: right; color: gray; text-decoration: none; - font-weight: normal; font-style: normal; text-indent: 0;} - .poetry-container - {text-align: center;} - .poetry - {text-align: left; margin-left: 5%; margin-right: 5%;} - .poetry /*delete for left-aligned poetry*/ - {display: inline-block;} - .poetry .stanza - {margin: .75em auto;} - .poetry .verse - {text-indent: -3em; padding-left: 3em; font-size: .9em;} - .poetry .verse.indent0 - {text-indent: -3em; padding-left: 3em;} - .poetry .verse.indent4 - {text-indent: -1em;} - .x-ebookmaker .poetry - {display: block;} - .righttext - {float: right; padding-left: 1em; display: inline-block;} - .x-ebookmaker .righttext {float: none; padding-left: 1em;} - .smcap - {font-variant: small-caps;} - .smcapall - {text-transform: lowercase; font-variant: small-caps;} - .split1090 - {clear: both;} - .split1090 .left1090 - {float: left; clear: left; width: 9%;} - .x-ebookmaker .split1090 .left1090 {float: left;} - .split1090 .right1090 - {float: right; clear: right; width: 89%;} - .x-ebookmaker .split1090 .right1090 {float: right;} - .split2575 - {clear: both;} - .split2575 .left2575 - {float: left; clear: left; width: 24%;} - .x-ebookmaker .split2575 .left2575 {float: left;} - .split2575 .right2575 - {float: right; clear: right; width: 74%;} - .x-ebookmaker .split2575 .right2575 {float: right;} - .split4060 - {clear: both;} - .split4060 .left4060 - {float: left; clear: left; width: 39.5%;} - .x-ebookmaker .split4060 .left4060 {float: left;} - .split4060 .right4060 - {float: right; clear: right; width: 59.5%;} - .x-ebookmaker .split4060 .right4060 {float: right;} - .split5050 - {clear: both;} - .split5050 .left5050 - {float: left; clear: left; width: 49%;} - .x-ebookmaker .split5050 .left5050 {float: left;} - .split5050 .right5050 - {float: right; clear: right; width: 49%;} - .x-ebookmaker .split5050 .right5050 {float: right;} - .split6040 - {clear: both;} - .split6040 .left6040 - {float: left; clear: left; width: 59%;} - .x-ebookmaker .split6040 .left6040 {float: left;} - .split6040 .right6040 - {float: right; clear: right; width: 39%;} - .x-ebookmaker .split6040 .right6040 {float: right;} - .split6733 - {clear: both;} - .split6733 .left6733 - {float: left; clear: left; width: 66.5%;} - .x-ebookmaker .split6733 .left6733 {float: left;} - .split6733 .right6733 - {float: right; clear: right; width: 32.5%;} - .x-ebookmaker .split6733 .right6733 {float: right;} - .split9208 - {clear: both;} - .split9208 .left9208 - {float: left; clear: left; width: 91%;} - .x-ebookmaker .split9208 .left9208 {float: left;} - .split9208 .right9208 - {float: right; clear: right; width: 8%;} - .x-ebookmaker .split9208 .right9208 {float: right;} - sub - {font-size: .6em; vertical-align: -10%;} - sup - {font-size: .6em; vertical-align: top;} - .trule - {clear: right;} - .trule.image - {float: left; width: 4em; margin-top: .25em;} - .x-ebookmaker .trule.image {float: left;} - .trule.text - {text-align: left; margin-top: 1.5em;} - table - {margin-left: auto; margin-right: auto; margin-bottom: .75em; margin-top: .75em; border-collapse: collapse;} - table.allart - {margin-top: 1.25em; margin-bottom: 1.25em; color: white; background: black;} - table.allart td.blank - {padding-left: .5em; padding-right: .5em;} - table.allart td.blankbot - {padding-bottom: .75em} - table.allart td.blanktop - {padding-top: .75em} - table.allart td.leftright - {max-width: .25em;} - table.allart td.text - {text-align: left; letter-spacing: .1em; word-spacing: .2em; white-space: nowrap; padding-left: 2em; - padding-right: 2em;} - table.allart td.topbot - {line-height: .25em;} - table.bolts - {white-space: nowrap;} - table.bolts td.fraction - {text-align: left; padding-left: 0; padding-right: .25em; border-right: solid thin;} - table.bolts td.integer - {text-align: right; padding-left: .25em; padding-right: 0;} - table.circle - {margin: .75em 0 1.5em 1.5em; text-align: left;} - table.circle td.text - {text-align: left; vertical-align: top; padding-left: .25em; padding-right: .25em;} - table.diamarea - {white-space: nowrap; font-size: .9em;} - table.diamarea - {white-space: nowrap;} - table.diamarea .pagenum - {font-size: .8em;} - table.diamarea td.area.dec - {text-align: left; padding-left: 0; padding-right: .25em; border-right: solid thin;} - table.diamarea td.area.int - {text-align: right; padding-left: .25em; padding-right: 0;} - table.diamarea td.circumf.dec - {text-align: left; padding-left: 0; padding-right: .25em;} - table.diamarea td.circumf.int - {text-align: right; padding-left: .25em; padding-right: 0;} - table.diamarea td.diam - {text-align: center; padding-left: .25em; padding-right: .25em; border-right: solid thin;} - table.fracdec - {white-space: nowrap;} - table.fracdec td.decimal, - table.fracdec td.inch - {text-align: left;} - table.fracdec td.equals - {text-align: center; padding-left: .25em; padding-right: .25em;} - table.fracdec td.denom - {text-align: center; font-weight: bold; line-height: 2.5em;} - table.fracdec td.fraction, - table.fracdec td.mm - {text-align: right;} - table.gauges - {white-space: nowrap;} - table.gauges td.gauge - {text-align: center; padding-left: .25em; padding-right: .25em;} - table.gauges td.numbers - {text-align: left; padding-left: .25em; padding-right: .25em; border-right: solid thin;} - table.gauges th - {vertical-align: bottom; padding-left: .1em; padding-right: .1em;} - table.gears td - {padding-left: .25em; padding-right: .25em;} - table.gears td.speed - {text-align: right; vertical-align: bottom; white-space: nowrap;} - table.gears td.unit - {text-align: left; vertical-align: bottom; white-space: nowrap;} - table.gears td.wheel - {text-align: left; padding-left: 1.25em; text-indent: -1em; vertical-align: top;} - table.ironpipe - {white-space: nowrap; font-size: .9em;} - table.ironpipe td.frac - {text-align: left; padding-left: 0; padding-right: .25em;} - table.ironpipe td.int - {text-align: right; padding-left: .25em; padding-right: 0;} - table.ironpipe th - {font-size: .8em; vertical-align: bottom;} - table.measures - {margin-top: 0; margin-bottom: 0; white-space: nowrap;} - table.measures td.equals - {text-align: center; padding-left: .25em; padding-right: .25em;} - table.measures td.number - {text-align: right; padding-right: .25em;} - table.measures td.number.nomargin - {padding-right: 0;} - table.measures td.text - {text-align: left;} - table.paper - {white-space: nowrap;} - table.paper td.ditto - {text-align: center; padding-left: 0; padding-right: 0;} - table.paper td.inches - {text-align: center; padding-left: 2em; padding-right: .25em;} - table.paper td.size - {text-align: left;} - table.roman - {margin: 0 0 .75em 0; text-align: left; white-space: nowrap;} - table.roman td.equals - {text-align: center; padding-left: .25em; padding-right: .25em;} - table.roman td.number - {text-align: right;} - table.roman td.text - {text-align: left;} - table.symbols - {margin-top: 0; margin-bottom: 0;} - table.symbols td.descr - {text-align: left; padding-left: 1em; text-indent: -1em; padding-right: 2em; vertical-align: top;} - table.symbols td.symbol - {text-align: right; vertical-align: bottom; white-space: nowrap;} - table.toc - {margin-top: 2.5em; margin-bottom: 2.5em;} - table.toc td.pages - {text-align: right; padding-left: 1em; vertical-align: bottom; white-space: nowrap;} - table.toc td.subject - {text-align: left; padding-left: 1em; text-indent: -1em; vertical-align: top; padding-right: 2em;} - th - {font-weight: normal;} - .tnbot - {border: dashed thin; margin: 1em 10%; padding: .5em;} - .tnbot h2 - {font-size: 1em;} - .tnbot p - {text-indent: -1em; margin-left: 1em;} - .tnbox - {border: dashed thin; margin: 1em 20%; padding: 1em;} - .top - {vertical-align: top;} - ul.index - {list-style: none; margin: 1.5em 0; text-align: left; max-width: 25em;} - ul.index li - {text-align: justify; margin-left: 1em; text-indent: -1em; clear: both;} - ul.index li.level1 - {margin-left: 2.5em;} - ul.index li.level2 - {margin-left: 5em;} - ul.index li.startletter - {margin-top: 1.25em;} - .ws05 - {word-spacing: .5em;} - - </style> - </head> -<body> -<p style='text-align:center; font-size:1.2em; font-weight:bold'>The Project Gutenberg eBook of Self-Help Mechanical Drawing, by Nehemiah Hawkins</p> -<div style='display:block; margin:1em 0'> -This eBook is for the use of anyone anywhere in the United States and -most other parts of the world at no cost and with almost no restrictions -whatsoever. You may copy it, give it away or re-use it under the terms -of the Project Gutenberg License included with this eBook or online -at <a href="https://www.gutenberg.org">www.gutenberg.org</a>. If you -are not located in the United States, you will have to check the laws of the -country where you are located before using this eBook. -</div> - -<p style='display:block; margin-top:1em; margin-bottom:0; margin-left:2em; text-indent:-2em'>Title: Self-Help Mechanical Drawing</p> -<p style='display:block; margin-left:2em; text-indent:0; margin-top:0; margin-bottom:1em;'>An Educational Treatise</p> -<p style='display:block; margin-top:1em; margin-bottom:0; margin-left:2em; text-indent:-2em'>Author: Nehemiah Hawkins</p> -<p style='display:block; text-indent:0; margin:1em 0'>Release Date: January 15, 2022 [eBook #67166]</p> -<p style='display:block; text-indent:0; margin:1em 0'>Language: English</p> - <p style='display:block; margin-top:1em; margin-bottom:0; margin-left:2em; text-indent:-2em; text-align:left'>Produced by: deaurider, Harry Lamé and the Online Distributed Proofreading Team at https://www.pgdp.net (This file was produced from images generously made available by The Internet Archive)</p> -<div style='margin-top:2em; margin-bottom:4em'>*** START OF THE PROJECT GUTENBERG EBOOK SELF-HELP MECHANICAL DRAWING ***</div> - -<div class="tnbox"> -<p class="center">Please see the <a href="#TN">Transcriber’s Notes</a> at the end of this text.</p> -</div> - -<hr class="chap" id="Page1" /> - -<div class="x-ebookmaker-drop"> - -<div class="container"> -<img src="images/cover.jpg" alt="Cover image" /> -</div> - -<hr class="chap" /> - -</div><!--ebookmaker-drop--> - -<div class="container w30em" id="Pageiii"> -<img src="images/illo003.jpg" alt="Minerva" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="container w15em"> -<img src="images/illo004.jpg" alt="Lamp" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<h1>SELF-HELP<br /> -<span class="fsize150 gesp1">MECHANICAL DRAWING</span><br /> -<span class="fsize80">AN EDUCATIONAL TREATISE</span></h1> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Pagevi"> </span></p> - -<div class="container w30em"> -<img src="images/illo006.png" alt="Hands with calipers" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Pagevii"> </span></p> - -<p class="center highline2 fsize90">“<i>LEARN TO DO A THING BY DOING IT.</i>”—<span class="fsize70"><i>OLD -PROVERB</i></span></p> - -<p class="center highline2 fsize175">SELF-HELP<br /> -<span class="fsize125 gesp1">MECHANICAL DRAWING</span><br /> -<span class="fsize80"><i>AN EDUCATIONAL TREATISE</i></span></p> - -<div class="container w10em"> -<img src="images/illo007.png" alt="Logo" /> -</div> - -<p class="center highline15"><span class="fsize80">BY</span><br /> -<span class="fsize175"><b>N. HAWKINS, M. E.</b></span><br /> -<span class="fsize90"><i>Author of Handbook of Calculations, etc.</i></span></p> - -<p class="center highline2 blankbefore75"><span class="fsize125 gesp2"><i>New York</i>: THEO. AUDEL & CO., -Publishers</span><br /> -1902</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Pageviii"> </span></p> - -<p class="center fsize150 highline2 blankbefore2 blankafter2"><i>Copyrighted<br /> -by<br /> -Theo. Audel & Co.<br /> -New York<br /> -1902</i><br /> -</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Pageix"> </span></p> - -<p class="center highline15"><b><i>This work<br /> -is<br /> -most kindly and<br /> -respectfully dedicated to<br /> -<span class="fsize125 gesp2">THE COMING MAN</span><br /> -who at the present time<br /> -is undoubtedly devoting<br /> -a goodly share of<br /> -his spare time to<br /> -the study of<br /> -drawing.</i></b></p> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="container w20em"> -<img src="images/illo010.jpg" alt="Drawing hand" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page11">[11-<br />12]</span><a id="Page12"></a></p> - -<div class="container w30em"> -<img src="images/illo011.png" alt="Introduction" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page13">[13]</span></p> - -<h2 class="nobreak">Preface.</h2> - -</div><!--chapter--> - -<p><i>It is because of a personal and practical experience of the advantage to be gained by the -possession of a knowledge of drawing, that the author is prompted to undertake the rather pleasant -task of producing a self-help book relating to the subject.</i></p> - -<p><i>Since the days of youthful endeavor, the author has passed through an extended experience -of mechanical life, and scarcely ever without chalk, pencil or instrument in hand, to illustrate by -sketch or drawing, the tools to be employed, or to picture the finished product; accordingly, -throughout this work, words of explanation and the drawings will go together to aid the diligent -student.</i></p> - -<p><i>It has been said by an eminent writer, that “one workman is superior to another—other -circumstances being the same—directly in proportion to his knowledge in drawing, and those who -are ignorant of it must in many respects be subservient to others who have obtained that knowledge.”</i></p> - -<p><i>It has been also said that no man is fitted to be foreman of a shop who cannot draw, and -it is generally true that no one will be appointed to that position, except temporarily, who does -not possess some knowledge of the art, either “freehand” or instrumental.</i></p> - -<p><span class="pagenum" id="Page14">[14]</span></p> - -<p><i>It is a question how far a good working knowledge of drawing can be attained without a -teacher; it is true that but few have become proficient without such aid, but it is equally true -that “self-help” has been the key note to all advancement.</i></p> - -<p><i>The author received personal instruction in several ways and times, at home, in school, in -an architect’s office, and under an experienced mechanical engineer, but it was in the early morning -hours of a bright summer time—lang syne—that he made his first serious attempt to master the -art of mechanical drawing. It was a struggle and a battle to hold himself down to “the board” -to the finish, but it was a victory—one, won over slothfulness and impatience, and of such a -nature as to warrant the use of the term “self-help” to the encouragement of others.</i></p> - -<p><i>In conclusion two sentiments may be added; if a good working knowledge of drawing is -“worth the while” then, 1, the student should be thoroughly in earnest in acquiring it; 2, he -should be willing to take sufficient time and give much hard study to gain the skill necessary for -success.</i></p> - -<p><i>This persistence is not irksome. It carries its own reward, and the results are definite -and sure.</i></p> - -<div class="poetry-container"> - -<div class="poetry"> - -<div class="stanza"> -<span class="verse indent0">“<i>One step and then another, and the longest walk is ended;</i><br /></span> -<span class="verse indent4"><i>One stitch and then another, and the largest rent is mended.</i><br /></span> -<span class="verse indent0"><i>One brick upon another, and the highest wall is made;</i><br /></span> -<span class="verse indent4"><i>One flake upon another, and the deepest snow is laid.</i>”<br /></span> -</div> - -</div><!--poetry--> - -</div><!--poetry-container--> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page15">[15]</span></p> - -<h2 class="nobreak">Introduction.</h2> - -</div><!--chapter--> - -<p>Drawing is one of the arts; art relates to something to be done, and art in the industrial and mechanical -sense aims chiefly at utility, and is governed by exact rules; hence mechanical drawing—so-called—tends first to -be useful and helpful, and second to accuracy in execution, including most minute details; it aspires to the -perfection of nature in adaptability of the means to the end.</p> - -<p>Drawing constitutes a universal language, to acquire which is a matter of importance, for by its use one is -able to illustrate the form and dimensions of an object, device, or utility, in very much less time, and far more -clearly, than by a verbal description.</p> - -<p>To a person who may not be able perfectly to understand the language of a country, to be able to draw is -an aid and a safeguard; to use the words of Sir Joshua Reynolds, “the pencil speaks the language of every land.”</p> - -<p>In extensive iron works and metal-working establishments the designer and draughtsman is always in -demand. His services are indispensable and his position is a highly responsible one. It becomes his -pecial<span class="pagenum" id="Page16">[16]</span> -province to design improvements, to furnish sketches and to make finished drawings; to calculate strains, strength, -power, motion, weight, friction and durability. All this and much more is the professional draughtsman’s work.</p> - -<p>In “directory” classification, he who accomplishes such comprehensive results as above described is termed -a “Draughtsman,” but the word has as wide a meaning as “Engineer,” which takes in civil, mechanical, naval, -sanitary, steam and other engineering specialists. So, in drafting, it includes the office boy employed in making -blue prints, it embraces the copyists, tracers and assistants, as well as the head draughtsman and chief engineer.</p> - -<p>Consequently the range is wide, and the line hard to draw between draughtsmen who work with their -hands, and those who work with their brains. It may be added that the best men are too frequently undervalued, -owing to the unavoidable difficulty in distinguishing the difference in true worth, between the two widely separated -classes.</p> - -<p>It may be remarked that they only draw well who draw intelligently; aptness in this, as in many other -virtues, is a matter of slow growth, “here a line and there a line”—it’s the proper direction, not the rate of -progress, that counts in the end.</p> - -<p>There are several methods of drawing—1, Free-hand; 2, Instrumental; 3, Geometrical; 4. Perspective. -In the first the work, also termed sketching, is executed by pencil, pen, crayon, or even paint-brush; in the second -the result is attained by the use of rule, tee-square, drawing pen, etc.; this method is also denominated -mechanical drawing, and suggests the title of this volume.</p> - -<p>The great usefulness, not to say necessity, of readiness in executing accurately, drawings “to scale,” -is<span class="pagenum" id="Page17">[17]</span> -emphasized by the fact that now, more than ever, is all machinery designed, and it may almost be said, is “built,” -in the draughting room—this is a valuable hint relating to “reading” drawings.</p> - -<p>It is wise, as well as easy, to begin at the beginning of things; thus, it is altogether the good part to mount -a ladder by the first and second rounds rather than to attempt it by taking the third, sixth, ninth, etc.—especially -are first and second rounds the very best to start upon; “Chalk-work,” is the first subject introduced, -next, that of “Free-hand.” These are the first steps leading upward in this most agreeable attainment—skill -in illustrating and designing of objects, tools, and utilities.</p> - -<p>A single word of advice before introducing the elementary work connected with mechanical drawing: if -the student should experience difficulty in mastering the diagrams and curves abounding in this book, let him -consult an experienced draughtsman or teacher, who, by a few strokes of a lead pencil, can easily make them plain; -that knowledge—which cannot be printed or self-taught—termed <i>the Craftsman’s Art</i>, is communicated largely by -personal telling and showing, from man to man; in drawing, this help should be thankfully availed of, when -necessity arises.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—Sketching is often in demand because there is no time for finished or careful drawings, and the one who can draw a few -lines in a moment to let a sudden necessity be known, is the man of the hour. All candidates for First Class Engineer’s Certificates in -marine service in the navy have to undergo an examination in rough drawing; this is intended not so much as a proof of the applicant -possessing the capability of a draughtsman, but in the event of any injury to the engines in his charge, so that he may be able to send to -his Superintendent a rough drawing of the particular part, properly dimensioned, so that it could be worked from, and time saved on the -arrival of the ship at the port where the repairs are to be done.</p> - -</div><!--note--> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page18">[18]</span></p> - -<div class="container w20em"> -<img src="images/illo018.jpg" alt="Artist" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page19">[19]</span></p> - -<div class="container w30em"> -<img src="images/illo019.png" alt="PLAN OF THE WORK" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page20">[20]</span></p> - -<div class="ballard"> - -<p><span class="padl4">“<i>No matter how thorough our education may have been</i></span><br /> -<span class="padl3 ws05"><i>at the first, rules and formulas will slip from the</i></span><br /> -<span class="padl2"><i>memory, and every day’s experience gives additional</i></span><br /> -<span class="padl1"><i>evidence of the truth of the old adage that</i> ‘<span class="smcapall">THE</span><br /> -KEY THAT RESTS, RUSTS</span>.’”—<span class="smcap fsize90">Simpson Ballard.</span></p> - -</div><!--ballard--> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page21">[21]</span></p> - -<h2 class="nobreak">The Plan of the Work.</h2> - -</div><!--chapter--> - -<p>The purpose or scope of this work may be briefly stated: It is to aid the aspiring student in making the first -advance towards a thorough and useful knowledge of drawing in its several divisions, as elsewhere defined.</p> - -<p>The method to be followed in presenting the subject will be the natural order clearly and simply defined, -as “from the less to the greater.”</p> - -<p>The first subject to be discussed comes under the heading of chalk-work, <i>i. e.</i>, such drawings as can be -executed on a blackboard, a floor, or even on more primitive surfaces, such as a smooth stone or board.</p> - -<p>This is indeed a lowly beginning, but the author is quite confident it will awaken as much interest as any part -of the book—even in the most experienced in the art of drawing, as to them it will revive the ambitions and first -crude attempts made in the golden days of their youth.</p> - -<p>Let it be clearly understood by all, and especially by those who wish to learn drawing, that the study of this -delightful art does not require any special qualification. We need only ask one question: Have you learned to -write? If so, be assured you may learn to draw, but to all the same rule applies, first the elements of the art, and -afterwards the more advanced study.</p> - -<p>It is not expected that all should exhibit a decided taste for drawing, for the possession of this is rather a gift -of nature than the result of education; but a knowledge of principles and a certain amount of executive ability<span class="pagenum" id="Page22">[22]</span> -may be obtained by every one of average capacity, and whatever the natural power may be, it will be increased -and developed by exercise; if the progress is steady and continuous and in the right direction, success is sure to -crown the work.</p> - -<p>The second division of the book will be free-hand drawing, <i>i. e.</i>, that which is executed without instruments. -Nothing to instruct has been spared in this important step in the path of advancement.</p> - -<p>The illustrations accompanying the two opening sections have been made designedly elementary, for there -are many who have a taste for drawing and who have a desire to learn, who from place of residence or other -circumstances have not the opportunity of receiving the assistance of a master. To such this book presents itself -as a friend directing to the right road, talking, reasoning, and explaining by the way.</p> - -<p>The “chalk-work” and “free-hand” sections of the book relate to the foundations upon which all must rest -who seek the aid to be derived from the art; hence, the following pages are written with a view to encourage all, -and those who are prepared to follow the directions given in them may look forward to the possession of sufficient -drawing power to add to their usefulness in after life.</p> - -<p>At this point of attainment there arises a need to know the meaning of many words and phrases used by -draughtsmen; these are grouped alphabetically from A to Z under the heading <span class="nowrap">of,——</span></p> - -<p>Useful Terms and Definitions: Memorizing these few pages will be of benefit, as an intimate knowledge -of the language of the drawing office stamps a man as worthy of a hearing, and assures attention to anything -which he may write or say pertaining to the art.</p> - -<p><span class="pagenum" id="Page23">[23]</span></p> - -<p>After the Definitions the subject explained will be the Instruments and Materials used in mechanical -drawings; following in due course appear Geometrical and Mechanical Drawing, Gearing, Linear Perspective, Projection, -Shading, Tracing, Lettering, Drawing Office Rules, Reading Drawings, Useful Tables and a General Index, -to which the student is referred. A careful reading is requested to the following helpful note.</p> - -<p>Grateful acknowledgment is made to George Perrott, Esq., M. E., for practical and technical assistance -throughout the work, and to Theo. Lucas, Engineer, for text and illustrations in the portions of the book relating -to Linear Perspective and Projection.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—In <span class="smcap">Machinery</span> Prof. Chas. H. Benjamin says, referring to drawing, under heading “How and what to study,” “... I have -so far said nothing about drawing, for I do not think it of much use to learn that, until you know what you want of it. All this time that -you have been studying mechanism you should have had a sketch book or pad of note paper, and made free hand sketches of mechanical -movements which interested you and of various machine details. You should accustom yourself to use drawing as a means of expressing -ideas, just as you use written words, so that it becomes a second nature to you to sketch anything you wish to remember or describe. If -you work from blue-prints in the shop, or if you can borrow some to study, this will help you to understand how a drawing is made. You -can get some drawing instruments at any time and begin to practice on drawing straight lines and circles, so as to become familiar with -the instruments. And here it will be of great benefit to you if you can attend an evening drawing school for one night in the week -at least.</p> - -<p>“When you have become sufficiently familiar with the principles of drawing, a book on mechanism will tell you how to draw gear -teeth and cams, and how to design various link motions. Make up your own problems from what you see in the shop and make your drawing -a means to an end and not the principal thing; it is of little use to be able to make a nice drawing unless you know what to draw and why.</p> - -<p>“Drawing is a convenient tool as an aid in expressing to others the ideas which you wish to convey; in all cases take the problems -and the ideas from your every-day work and that which is around you; your success will depend upon the close connection which you -keep at all times between your acquired knowledge and your practical work.”</p> - -</div><!--note--> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page24">[24]</span></p> - -<h2 class="nobreak">General List of Contents.</h2> - -</div><!--chapter--> - -<table class="toc" summary="Contents"> - -<tr> -<td class="subject"><span class="smcap">Introduction</span>,</td> -<td class="pages"><a href="#Page1">1</a>-<a href="#Page24">24</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Chalk Work</span>,</td> -<td class="pages"><a href="#Page25">25</a>-<a href="#Page38">38</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Preliminary Terms and Definitions</span>,</td> -<td class="pages"><a href="#Page39">39</a>-<a href="#Page52">52</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Freehand Drawing</span>,</td> -<td class="pages"><a href="#Page53">53</a>-<a href="#Page78">78</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Geometrical Drawing</span>,</td> -<td class="pages"><a href="#Page79">79</a>-<a href="#Page100">100</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Drawing Materials and Instruments</span>,</td> -<td class="pages"><a href="#Page101">101</a>-<a href="#Page134">134</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Mechanical Drawing</span>,</td> -<td class="pages"><a href="#Page135">135</a>-<a href="#Page188">188</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Penciling</span>,</td> -<td class="pages"><a href="#Page139">139</a>-<a href="#Page147">147</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Projection</span>,</td> -<td class="pages"><a href="#Page148">148</a>-<a href="#Page164">164</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Inking in Drawings</span>,</td> -<td class="pages"><a href="#Page167">167</a>-<a href="#Page170">170</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Lettering Drawings</span>,</td> -<td class="pages"><a href="#Page171">171</a>-<a href="#Page175">175</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Dimensioning Drawings</span>,</td> -<td class="pages"><a href="#Page176">176</a>-<a href="#Page179">179</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Shading Drawings</span>,</td> -<td class="pages"><a href="#Page180">180</a>-<a href="#Page181">181</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Section Lining and Colors</span>,</td> -<td class="pages"><a href="#Page182">182</a>-<a href="#Page185">185</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Reproducing Drawings</span>,</td> -<td class="pages"><a href="#Page186">186</a>-<a href="#Page188">188</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Drawing Office Rules</span>,</td> -<td class="pages"><a href="#Page189">189</a>-<a href="#Page195">195</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Gearing</span>,</td> -<td class="pages"><a href="#Page197">197</a>-<a href="#Page208">208</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Designing Gears</span>,</td> -<td class="pages"><a href="#Page209">209</a>-<a href="#Page216">216</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Working Drawings</span>,</td> -<td class="pages"><a href="#Page219">219</a>-<a href="#Page227">227</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Reading Working Drawings</span>,</td> -<td class="pages"><a href="#Page228">228</a>-<a href="#Page230">230</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Patent Office Rules for Drawings</span>,</td> -<td class="pages"><a href="#Page231">231</a>-<a href="#Page236">236</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Useful Hints and “Points,”</span></td> -<td class="pages"><a href="#Page237">237</a>-<a href="#Page244">244</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Linear Perspective</span>,</td> -<td class="pages"><a href="#Page245">245</a>-<a href="#Page265">265</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Personal, by the Editor</span>,</td> -<td class="pages"><a href="#Page281">281</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Useful Tables</span>,</td> -<td class="pages"><a href="#Page269">269</a>-<a href="#Page280">280</a></td> -</tr> - -<tr> -<td class="subject"><span class="smcap">Reference Index</span>,</td> -<td class="pages"><a href="#Page283">283</a></td> -</tr> - -</table> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page25">[25]</span></p> - -<div class="container w30em"> -<img src="images/illo025.png" alt="CHALK-WORK" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page26">[26]</span></p> - -<table class="allart" summary="Faux table"> - -<tr> -<td colspan="5" class="topbot"> </td> -</tr> - -<tr> -<td rowspan="5" class="leftright"> </td> -<td class="blank btd bbd bld"> </td> -<td class="text btd"><span class="padl2">The</span> peculiarity of all art is that it cannot</td> -<td class="blank btd brd bbd"> </td> -<td rowspan="5" class="leftright"> </td> -</tr> - -<tr> -<td class="blank brd"> </td> -<td class="text">be communicated in writing alone, craft is a</td> -<td class="blank bld"> </td> -</tr> - -<tr> -<td class="blank brd"> </td> -<td class="text">term which is synonymous with art; a craft</td> -<td class="blank bld"> </td> -</tr> - -<tr> -<td class="blank brd"> </td> -<td class="text">requires manual dexterity which cannot be</td> -<td class="blank bld"> </td> -</tr> - -<tr> -<td class="blank btd bbd bld"> </td> -<td class="text bbd">taught in books.</td> -<td class="blank btd brd bbd"> </td> -</tr> - -<tr> -<td colspan="5" class="topbot"> </td> -</tr> - -</table> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page27">[27]</span></p> - -<h2 class="nobreak">Chalk Work.</h2> - -</div><!--chapter--> - -<p>The blackboard has been well called the great -weapon of the modern educator; this is especially true -in reference to instruction in an art dealing with lines, -curves and figures.</p> - -<div class="container leftfloat w20em" id="Fig6"> -<img src="images/illo027a.jpg" alt="Chalk-crayon" /> -<p class="caption">Fig. 6.</p> -</div> - -<p>Many a man can chalk out on a blackboard, or on -a piece of sheet-iron, or on the floor, just what he wants -to show, and make his meaning very plain; hence, in -every workshop, and many other places, a blackboard -is more than useful, and it has been said that no -draughting office is complete without one.</p> - -<p><a href="#Fig6">Fig. 6</a> represents a chalk-crayon.</p> - -<div class="container" id="Fig7"> - -<img src="images/illo027b028.jpg" alt="Blackboards" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 7.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 8.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page28">[28]</span></p> - -<p><a href="#Fig7">Figs. 7 and 8</a> need no explanation, as they represent -two forms of the well-known blackboard.</p> - -<p>Chalk lines have this advantage—they are easily -altered or rubbed out when not needed any longer. -The work executed upon a blackboard is mostly -done by hand, without aid from instruments; a few -tools, however, are useful—such as, 1, large wooden -blackboard compasses holding a crayon, which are made -and sold by the trade in size twelve inches to thirty -inches in length; 2, a straight-edge; and 3, some crayons. -With the compasses circles and part of the circle -can be made, and with the straight-edge the larger -lines can be drawn.</p> - -<p>These instruments are shown on <a href="#Page29">page 29</a>, and are, -1, compasses, for holding chalk for making circles; 2, a -tee-square; 3, a straight-edge; 4, a protractor for measuring -angles; 5, a triangle 60° and 30°; 6, a brass -holder for crayons.</p> - -<p>Blackboard Drawing.—The use of a blackboard -comes principally and properly under the head of<span class="pagenum" id="Page29">[29]</span> -free-hand drawing, but its importance is such that a -separate division of the volume is assigned to it.</p> - -<div class="container w50em"> -<img src="images/illo029.jpg" alt="Instruments" /> -</div> - -<p><span class="pagenum" id="Page30">[30]</span></p> - -<p>Thus, chalk-work may be considered the first lesson -in “free-hand,” as all the examples can also be most -profitably practiced with pencil and paper.</p> - -<p>Very rapid drawing upon the board should not be -encouraged, as it is likely not to be accurate enough; -again, the board should be entirely free from grease. -Cloths, sponges or chamois skin rubbers may be used -to erase or change the chalk marks. Vertical lines -should be drawn from above downward; short lines -should be drawn with the fingers alone, those somewhat -longer with the hand, using the wrist-joint; the still -longer lines with the forearm, using the elbow-joint; -those longer yet with the whole arm, using the -shoulder-joint; lines should always be drawn with a -uniform motion, slow enough for the eye to follow.</p> - -<p>Practice in chalk-work should alternate with -sketching in a sketchbook and with geometrical drawing—to -be hereafter described. The student should -practice a short time on the board, at least once a week; -large sizes are the most profitable for the representations -to be made; when drawing in different directions the -hand should be turned, not the paper or board; the -hand should never be allowed to obstruct the sight, -hence the hand and fingers should be held in a position -of freedom—with fingers not nearer than 1<sup>1</sup>⁄<sub>2</sub> or 2 -inches from the board.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—The first lesson of any kind the author received in -drawing was to make a straight line; this was effected by holding -the pencil nearly erect and guiding it along by the aid of the little -finger held pressed against the edge of a board; this was a useful -item of knowledge, as proved by passing years.</p> - -<p>A well-known artist, in telling his early experience, said: -“The first thing I was taught was to draw a line, divide it, erect -a perpendicular from its center, and afterwards to divide the angle -made by the perpendicular.” In answer to a question asking how -long he was kept at the lines, he replied, “about two months—or -a month or two,” indicating that even the longer time would have -been well spent in learning to draw a straight line.</p> - -</div><!--note--> - -<h3>PREPARATORY PRACTICE IN DRAWING.</h3> - -<p>Every visible object is bounded by lines which -enable the observer to determine its shape. If these<span class="pagenum" id="Page31">[31]</span> -lines are straight or curved, the shape of the object is -regular; if broken, the shape of the object is irregular.</p> - -<p>The elements, then, of form are lines, straight, -curved, or broken, and these, therefore, furnish the -beginning of all instruction in free-hand or mechanical -drawing.</p> - -<h3>PERPENDICULAR LINES.</h3> - -<p><a href="#Fig1516">Fig. 15</a> shows six lines—upright and perpendicular, -with points or “dots” indicated at the top and bottom -of each line; to draw these, proceed thus:</p> - -<div class="container w30em" id="Fig1516"> - -<img src="images/illo031.png" alt="Straight lines" /> - -<div class="split4060"> - -<div class="left4060"> -<p class="caption padr6">Fig. 15.</p> -</div> - -<div class="right4060"> -<p class="caption padl6">Fig. 16.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split4060--> - -</div><!--container--> - -<p>The learner should stand with his right shoulder -opposite the board, and the weight of the hand and the -arm should be allowed to fall naturally; now, make on -the board two points, one being six inches above the -other, these being merely “dots,” shown at the ends of -the lines, <a href="#Fig1516">figs. 15</a>, etc., and made with two motions; -the line between the points should now be drawn -not too quickly from the upper to the lower point; -three movements of the hand and arm complete the -line; to draw the other five lines the movements have -simply to be repeated.</p> - -<p>If the student pronounces to himself “one,” -“two,” “three,” at each motion, it will be helpful; in -this exercise, <a href="#Fig1516">fig. 15</a>, the aim is to make six lines, each -line being parallel to the first. Again, in the example, -it is intended that the lower point should be made -first, next the upper, and lastly the line drawn from the -upper to the lower point, but the order may be reversed; -at <i>one</i> the upper point, at <i>two</i> the lower, at -<i>three</i> the stroke upwards to complete the line.</p> - -<p><span class="pagenum" id="Page32">[32]</span></p> - -<h3>HORIZONTAL LINES.</h3> - -<p>To make these as shown in <a href="#Fig1516">fig. 16</a>, proceed as -follows: With the word <i>one</i> make a point, with <i>two</i> -another point six inches at the left, with <i>three</i> draw a -straight line from the left point to the right. All added -lines should be parallel: for practice, reverse the process -thus, <i>one</i>, make a “point,” at <i>two</i> another point at the -right, at <i>three</i> draw line to the left.</p> - -<p>The student will note that the two motions—at -the words <i>one</i> and <i>two</i>—are to fix the positions of the -ends of the lines; this practice will be found useful in -the most advanced examples and an item of elementary -practice never to be forgotten—like the help to be -derived by the first round of a ladder.</p> - -<div class="container w30em" id="Fig1718"> - -<img src="images/illo032.png" alt="Oblique lines" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 17.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 18.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<h3>OBLIQUE LINES.</h3> - -<p>In drawing oblique straight lines as shown in <a href="#Fig1718">fig. -17</a>, at the word <i>one</i> let the student make the lower -point; at the word <i>two</i> the upper, a little to the<span class="pagenum" id="Page33">[33]</span> -right of the lower; at the word <i>three</i> draw a line -quickly from the upper to the lower point. In pronouncing -the words <i>one</i>, <i>two</i>, <i>three</i>, let the student -make the additional parallel lines.</p> - -<p>As shown in <a href="#Fig1718">fig. 18</a>, at the word <i>one</i> make the lower -point; at the word <i>two</i> the upper point, a little <i>to the -left</i>; at the word <i>three</i> draw a line rapidly from the -upper to the lower point, and “timing” the process -by repeating <i>one</i>, <i>two</i>, <i>three</i>, make the additional parallel -lines.</p> - -<div class="container w15em" id="Fig19"> -<img src="images/illo033a.png" alt="Broken line" /> -<p class="caption">Fig. 19.</p> -</div> - -<h3>BROKEN LINES.</h3> - -<p>A broken line is composed of two or more straight -lines at angles to each other (see <a href="#Fig19">fig. 19</a>). To draw -them begin (saying) <i>one</i>, make a point; <i>two</i> a point -below at the left; <i>three</i>, a point above at the left; -<i>four</i>, draw a line from the left hand point to the lower -point; at the word <i>five</i>, from the lower point to the -upper right hand point. For practice draw numerous -lines in the same way, keeping them parallel to each -other, as shown in <a href="#Fig2021">fig. 20</a>.</p> - -<div class="container w30em" id="Fig2021"> - -<img src="images/illo033b.png" alt="" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 20.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 21.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page34">[34]</span></p> - -<div class="container w30em" id="Fig2224"> - -<img src="images/illo034a.png" alt="Lines" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 22.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 24.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<div class="container w30em" id="Fig2325"> - -<img src="images/illo034b.png" alt="Lines" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 23.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 25.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page35">[35]</span></p> - -<p>In example, <a href="#Fig2021">fig. 21</a>, the arrangement of the points -is changed—let the student draw at the words, as -follows: <i>One</i>, a point; <i>two</i>, a point above at the left; -<i>three</i>, a point below at the left; <i>four</i>, draw from the -point at the left to the upper point; <i>five</i>, from the -upper point to the lower right hand point; continue -to add parallel lines to complete the figure as shown.</p> - -<p><a href="#Fig2224">Figs. 22</a> and <a href="#Fig2325">23</a> are given as examples to practice, -making first the points and then the connecting -lines and afterward the parallel lines to complete the -figures.</p> - -<h3>CURVED LINES.</h3> - -<p>To draw curved lines, as shown in <a href="#Fig2224">fig. 24</a>. At the -word <i>one</i>, point; at the word <i>two</i>, point three inches -directly above; <i>three</i>, at the same distance above again -make a point; now draw a curve as shown, joining the -middle point and the upper point; now draw the -curve as shown below it; finally complete figure -as shown.</p> - -<div class="container w30em" id="Fig2627"> - -<img src="images/illo035a.png" alt="Curved lines" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 26.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 27.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<div class="container w30em" id="Fig28"> -<img src="images/illo035b.png" alt="Lines" /> -<p class="caption">Fig. 28.</p> -</div> - -<p><span class="pagenum" id="Page36">[36]</span></p> - -<div class="container w30em" id="Fig2930"> - -<img src="images/illo036.png" alt="Curves" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 29.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 30.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><a href="#Fig2325">Figs. 25</a> to <a href="#Fig2930">30</a> are to be practiced, making first the -points and then connecting them by the curves to -complete the figures.</p> - -<p>When two or more students are working together, -with each having a blackboard, the counting may be -in concert—or a teacher could count for a class. In -these line examples care should be used in making -them of uniform length. There is a difference to be -noted between a crooked line and a broken line, the -latter being a straight line and the former deviating -from it.</p> - -<p>Square chalk crayons are the best for hand work, -as lines of an even or uniform width can be drawn with -them.</p> - -<p>A very fine effect is produced by using two thicknesses -of chalk, one being double the thickness of the -other; the heavy lines being used on the shade side of -objects will produce a good effect, giving thickness and -body to the object.</p> - -<p>Round chalk crayons are used in the compasses to -draw circles, but hand lines drawn with them are not so -neat as those produced with the square-shaped chalk.</p> - -<p>To obliterate or remove the construction, or false -lines made on the blackboard, a wooden handle two -inches in diameter with a cone end 3 or 4 inches long, -covered with chamois skin or soft cloth tightly wrapped -round the cone and fastened with a tack or drawing -pin, makes the best implement to erase lines not -required, the point of the cone will remove these without -destroying the lines or curves which meet them.</p> - -<p><span class="pagenum" id="Page37">[37]</span></p> - -<p>Sponges, chamois skin or cloth rubbers are used -to rub out the chalk drawings and clean the blackboard.</p> - -<p>The best height for a diagram on the blackboard -is not higher than the head, nor lower than the elbow.</p> - -<p>Horizontal lines should be made from the left to -the right; the body and arm being moved with the -hand, and kept in the same relative position with it, -will steady the hand.</p> - -<p>Curved lines to the left should be drawn first, -enabling the eye to take in not only the curve in process -of formation but that already made.</p> - -<p>Passing the crayon in the hand, over the intended -curve previous to marking it, will guide the eye and -give confidence to the hand in chalking the curve.</p> - -<p>A proper distance from the blackboard is essential, -the face being about two feet away from it.</p> - -<p>Draw with the whole arm extended from the -shoulder-joint, not from the elbow or wrist.</p> - -<div class="container w50em" id="Fig31"> -<img src="images/illo037.jpg" alt="Crayon holder" /> -<p class="caption">Fig. 31.</p> -</div> - -<p><span class="pagenum" id="Page38">[38]</span></p> - -<table class="allart" summary="Faux table"> - -<tr> -<td colspan="3" class="topbot"> </td> -</tr> - -<tr> -<td class="leftright blanktop"> </td> -<td class="text btd brd bbd bld blanktop blankbot">“There are more ways than one of telling<br /> -things: by speech, by writing, by printing,<br /> -also by pictures and drawings.” Knowles</td> -<td class="leftright blankbot"> </td> -</tr> - -<tr> -<td colspan="3" class="topbot"> </td> -</tr> - -</table> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page39">[39]</span></p> - -<div class="container w30em"> -<img src="images/illo039.png" alt="TERMS DEFINITIONS" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page40">[40]</span></p> - -<div class="container w30em"> -<img src="images/illo040.jpg" alt="" /> -<p class="caption">ELECTRA.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page41">[41]</span></p> - -<h2 class="nobreak">Preliminary Terms and Definitions.</h2> - -</div><!--chapter--> - -<p>Like all the arts, drawing has a nomenclature of its -own, and nothing can be more helpful to the beginner -than to know the name of things relating to the art -of drawing. This is a language almost peculiar to -itself, and used daily and hourly by many thousands -of superintendents, foremen and master mechanics, as -well as by owners, designers and draughtsmen, hence -its introduction at this early stage.</p> - -<div class="definitions"> - -<p class="level0"><b>ALTITUDE.</b>—This is the elevation of an object above -its base, or the perpendicular distance between -the top and bottom of a figure.</p> - -<div class="container rightfloat w10em"> - -<div class="container w07em" id="Fig33"> -<img src="images/illo041.png" alt="Angle" /> -<p class="caption">Fig. 33.</p> -</div> - -<div class="container w05em" id="Fig34"> -<img src="images/illo042a.png" alt="Right angle" /> -<p class="caption">Fig. 34.</p> -</div> - -<div class="container w05em" id="Fig35"> -<img src="images/illo042b.png" alt="Acute angle" /> -<p class="caption">Fig. 35.</p> -</div> - -<div class="container w07em" id="Fig36"> -<img src="images/illo042c.png" alt="Obtuse angle" /> -<p class="caption">Fig. 36.</p> -</div> - -<div class="container w10em" id="Fig37"> -<img src="images/illo042d.png" alt="Angles" /> -<p class="caption">Fig. 37.</p> -</div> - -</div><!--container right--> - -<p class="level0" id="Ref4"><b>ANGLE</b> is the difference in the direction of two lines -which meet or tend to meet. The lines are called -<i>the sides</i> and the point of meeting, the <i>vertex</i> of -the lines.</p> - -<p class="level1">To make an angle apparent, -the two lines must meet in a -point, as <i>A B</i> and <i>A C</i>, which -meet in the point <i>A</i>, as shown -in <a href="#Fig33">fig. 33</a>.</p> - -<p class="level1">Angles are measured by degrees.</p> - -<p class="level1">A <i>Degree</i> is one of the three hundred and -sixty equal parts of the space about a point in a -plane.</p> - -<p class="level1">Angles are distinguished in respect to magnitude -by the terms Right, Acute and Obtuse -Angles.</p> - -<p><span class="pagenum" id="Page42">[42]</span></p> - -<p class="level1">A <i>Right Angle</i> is that formed -by one line meeting another, so as -to make equal angles with that -other.</p> - -<p class="level1">The lines forming a right angle are <i>perpendicular -to each other</i>.</p> - -<p class="level1">An <i>Acute Angle</i> is less than -a right angle. See <a href="#Fig35">Fig. 35</a>.</p> - -<p class="level1">An <i>Obtuse Angle</i> is greater -than a right angle. See <a href="#Fig36">Fig. 36</a>.</p> - -<p class="level1">Obtuse and acute angles are also called <i>oblique -angles</i>; and lines which -are neither parallel nor -perpendicular to each other -are called <i>oblique lines</i>.</p> - -<p class="level1">The <i>Vertex</i> or <i>Apex</i> of an angle is the point -in which the including lines meet.</p> - -<p class="level1">An angle is commonly designated by a letter -at its vertex; but when two or more angles have -their vertices at the same point, they cannot be -thus distinguished.</p> - -<p class="level1">For example, -when the three lines -<i>A B</i>, <i>A C</i>, and <i>A D</i> in -<a href="#Fig37">fig. 37</a> meet in the -common point <i>A</i>, we -designate either of the -angles formed, by -three letters, placing -that at the vertex -between those at the opposite extremities of the -including lines. Thus, we say, the angle <i>B A C</i>, etc.</p> - -<p class="level0"><b>APEX.</b>—The summit or highest point of an object.</p> - -<p class="level0"><b>ARC.</b>—See <a href="#Ref1">circle</a>.</p> - -<p class="level0"><b>AXIS OF A SOLID.</b>—An imaginary straight line passing -through its center.</p> - -<p><span class="pagenum" id="Page43">[43]</span></p> - -<p class="level0"><b>AXIS OF A FIGURE.</b>—A straight line passing through -the center of a figure, and dividing it into two -equal parts.</p> - -<p class="level0"><b>BASE.</b>—The base of a solid figure is that on which it -stands—the lowest part.</p> - -<p class="level0"><b>BISECT.</b>—To divide into two equal parts.</p> - -<p class="level0"><b>BISECTOR.</b>—A line which bisects.</p> - -<div class="container rightfloat w10em" id="Fig38"> -<img src="images/illo043.png" alt="Circle" /> -<p class="caption">Fig. 38.</p> -</div> - -<p class="level0" id="Ref1"><b>CIRCLE.</b>—A <i>Circle</i> is a plane -figure bounded by one uniformly -curved line, all of the -points in which are at the -same distance from a certain -point within, called the -<i>Center</i>.</p> - -<p class="level1">The <i>Circumference</i> of a circle is the curved -line that bounds it.</p> - -<p class="level1">The <i>Diameter</i> of a circle is a line passing -through its center, and terminating at both ends -in the circumference, as <i>A C B</i>.</p> - -<p class="level1">The <i>Radius</i> of a circle is a line extending -from its center to any point in the circumference. -It is one-half of the diameter. All the diameters -of a circle are equal, as are also all the radii <i>C D</i>, -<i>C B</i> and <i>C A</i>.</p> - -<p class="level1">An <i>Arc</i> of a circle is any portion of the circumference, -as <i>B D</i> and <i>A D</i>.</p> - -<p class="level1"><i>Semi-Circle.</i>—Half a circle formed by bisecting -it with a diameter, as <i>A C B</i>. <a href="#Fig38">Fig. 38</a>.</p> - -<p class="level1">An angle having its vertex at the center of a -circle is measured by the arc intercepted by its -sides. Thus, the arc <i>A D</i> measures the angle -<i>A C D</i>, and in general, to compare different angles, -we have but to compare the arcs, included by their -sides, of the equal circles having their centers at -the vertices of the angles.</p> - -<p class="level0" id="Ref3"><b>CIRCUMSCRIBE.</b>—To draw a line of figures about or -outside, such as a circle drawn around a square -touching its corners or angles.</p> - -<p><span class="pagenum" id="Page44">[44]</span></p> - -<p class="level1"><i>Inscribe.</i>—To draw a line or figure inside or -on the interior, such as a circle drawn within a -square touching its sides.</p> - -<p class="level0"><b>CONCAVE.</b>—Curving inwardly.</p> - -<p class="level0"><b>CONE.</b>—A solid body or figure having a circle for its -base, and its top terminated in a point or vertex.</p> - -<p class="level0"><b>CONSTRUCTION.</b>—The making of any object.</p> - -<p class="level0"><b>CONTOUR.</b>—The outline of the general appearance of -an object.</p> - -<p class="level0"><b>CONVERGENCE.</b>—Lines extending towards a common -point.</p> - -<p class="level0"><b>CONVEX.</b>—Rising or swelling into a round form—the -opposite to concave.</p> - -<p class="level0"><b>CORNER.</b>—The point of meeting of the edges of a -solid, or the two sides of a plane figure.</p> - -<p class="level0"><b>CROSS-HATCHES.</b>—In free-hand drawing the use of -lines crossing each other to produce light and -shade effects.</p> - -<p class="level0"><b>CURVE.</b>—A line of which no part is straight.</p> - -<p class="level1"><i>Reversed Curve.</i>—One whose curvature is first -in one direction and then in the opposite direction.</p> - -<p class="level1"><i>Spiral Curve.</i>—A plain curve which winds -about and recedes, according to some law, from its -point of beginning, which is called its center.</p> - -<p class="level0"><b>CYLINDER.</b>—A solid bounded by a curved surface and -by two opposite faces called bases; the bases may -be any curved figures and give the name to the -cylinder; thus a circular cylinder is one whose -bases are circles.</p> - -<p class="level0"><b>CYLINDRICAL.</b>—Having the general form of a cylinder.</p> - -<p class="level0"><b>DEGREE.</b>—The 360th part of a circle.</p> - -<p class="level0"><b>DESCRIBE.</b>—To make or draw a curved line; to draw -a plan.</p> - -<p class="level0"><b>DESIGN.</b>—Any arrangement or combination to produce -desired results in industry or art. To -delineate a form or figure by drawing the outline—a -sketch.</p> - -<p><span class="pagenum" id="Page45">[45]</span></p> - -<p class="level0"><b>DEVELOP.</b>—To unroll or lay out.</p> - -<p class="level0"><b>DIAGONAL.</b>—A right line drawn from angle to angle -of a quadrilateral or many angled figure and -dividing it into two parts.</p> - -<p class="level0"><b>DIAMETER.</b>—A right line passing through the center -of a circle or other round figure terminated by the -curve and dividing the figure symmetrically into -two equal parts.</p> - -<p class="level0"><b>EDGE.</b>—The intersection of any two surfaces.</p> - -<p class="level0" id="Ref7"><b>ELEVATION.</b>—The term elevation, vertical projection -and <i>front view</i>—applied to drawings—all have the -same meaning.</p> - -<p class="level0"><b>FACE.</b>—One of the plane surfaces of a solid; it may -be bounded by straight or curved edges.</p> - -<p class="level0"><b>FINISHING.</b>—Completing a drawing whose lines have -been determined by erasing unnecessary lines and -strengthening and accentuating where this is -needed.</p> - -<p class="level0"><b>FORESHORTENING.</b>—Apparent decrease in length, -owing to objects being viewed obliquely; thus a -wheel, when seen obliquely, instead of appearing -round, presents the appearance of an ellipse.</p> - -<p class="level0"><b>FREE-HAND.</b>—Executed by the hand unaided by -instruments.</p> - -<p class="level0"><b>GENERATED.</b>—Produced by.</p> - -<p class="level0"><b>GEOMETRIC.</b>—According to geometry.</p> - -<p class="level0"><b>HALF-TINT.</b>—The shading produced by means of -parallel equidistant lines.</p> - -<p class="level0"><b>HEMISPHERE.</b>—Half a sphere obtained by bisecting -a sphere by a plane.</p> - -<p class="level0"><b>HORIZONTAL.</b>—Parallel to the surface of smooth -water. In drawing, a line drawn parallel to the -top and bottom of the sheet is called horizontal.</p> - -<p class="level0"><b>INSCRIBE.</b>—See <a href="#Ref3">circumscribe</a>—its opposite.</p> - -<p class="level0"><b>INSTRUMENTAL.</b>—By the use of instruments.</p> - -<p><span class="pagenum" id="Page46">[46]</span></p> - -<p class="level0"><b>LINE.</b>—A line has length, only, as A C; a right line is -a straight line, the shortest line that can be drawn -between two points, A——C.</p> - -<p class="level1"><i>Straight.</i> One which has the same direction -throughout its entire length.</p> - -<p class="level1"><i>Curved.</i> One no part of which is straight.</p> - -<p class="level1"><i>Broken.</i> One composed of different successive -straight lines.</p> - -<p class="level1"><i>Mixed.</i> One of straight and curved lines.</p> - -<p class="level1"><i>Center.</i> A line used to indicate the center of -an object.</p> - -<p class="level1"><i>Construction.</i> A working line used to obtain -required lines.</p> - -<p class="level1"><i>Dotted.</i> A line composed of short dashes. <span class="nowrap">- - - - - -</span></p> - -<p class="level1"><i>Dash.</i> A line composed of long dashes. <span class="nowrap">— — —</span></p> - -<p class="level1"><i>Dot</i> and <i>Dash</i>. A line composed of dots and -dashes alternating. <span class="nowrap">— · — · —</span></p> - -<p class="level1"><i>Dimension.</i> A line upon which a dimension -is placed.</p> - -<p class="level1"><i>Full.</i> An unbroken line, usually representing -a visible edge. <span class="nowrap">———</span></p> - -<p class="level1"><i>Shadow.</i> A line about twice as wide as the -ordinary full line.</p> - -<p class="level1">A straight line is often called simply a line, -and a curved line a curve.</p> - -<p class="level0"><b>LONGITUDINAL.</b>—In the direction of the length of an -object.</p> - -<p class="level0"><b>MODEL.</b>—A form used for study.</p> - -<p class="level0"><b>OBLIQUE.</b>—Neither horizontal nor vertical.</p> - -<p class="level0"><b>OBLONG.</b>—A rectangle with unequal sides.</p> - -<p class="level0"><b>OVAL.</b>—A plane figure resembling the longitudinal -section of an egg; or elliptical in shape.</p> - -<p class="level0"><b>OVERALL.</b>—The entire length.</p> - -<p class="level0"><b>PARALLEL.</b>—Having the same direction and everywhere -equally distant.</p> - -<p class="level0"><b>PATTERN.</b>—That which is used as a guide or copy in -making things.</p> - -<p class="level1"><i>Flat.</i> One made of paper or other thin material.</p> - -<p><span class="pagenum" id="Page47">[47]</span></p> - -<p class="level1"><i>Solid.</i> One which reproduces the form -and size of the object to be made.</p> - -<p class="level0"><b>PERIMETER.</b>—The boundary of a closed plane figure.</p> - -<p class="level0"><b>PERPENDICULAR.</b>—At an angle of 90°.</p> - -<p class="level0"><b>PERSPECTIVE.</b>—View; drawing objects as they appear -to the eye from any given distance and situation, -real or imaginary.</p> - -<p class="level0"><b>PLAN.</b>—Plan, horizontal projection and <i>top view</i> have -the same meaning.</p> - -<p class="level0"><b>PLANE FIGURE.</b>—A part of a plane surface bounded -by straight or curved lines, or by both combined.</p> - -<div class="container rightfloat w10em" id="Fig39"> -<img src="images/illo047a.png" alt="Polygon" /> -<p class="caption">Fig. 39.</p> -</div> - -<p class="level0"><b>POLYGON.</b>—A plane figure bounded by straight lines -called the sides of the polygon. -The least number of -sides that can bound a -polygon is three. Polygons -bounded by a greater number -of sides than four are -denominated only by the number of sides.</p> - -<p class="level1">A polygon of five sides is called a <i>Pentagon</i>; -of six, a <i>Hexagon</i>; of seven, a <i>Heptagon</i>; -of eight, an <i>Octagon</i>; of nine, a <i>Nonagon</i>, etc.</p> - -<p class="level1"><i>Diagonals</i> of a polygon are lines joining the -vertices of angles not adjacent.</p> - -<p class="level1">The <i>Perimeter</i> of a polygon is its boundary -considered as a whole.</p> - -<p class="level1">The <i>Base</i> of a polygon is the side upon which -the polygon is supposed to stand.</p> - -<p class="level1">The <i>Altitude</i> of a polygon is the perpendicular -distance between the base and a side or angle -opposite the base.</p> - -<div class="container rightfloat w10em" id="Fig40"> -<img src="images/illo047b.png" alt="Parallelogram" /> -<p class="caption">Fig. 40.</p> -</div> - -<p class="level1" id="Ref5">A <i>Quadrilateral</i> is a polygon having four sides -and four angles.</p> - -<p class="level1">A <i>Parallelogram</i> is a -quadrilateral which has its -opposite sides parallel.</p> - -<p class="level1">The side upon which a -parallelogram stands and the opposite side are -called respectively its lower and upper bases.</p> - -<p><span class="pagenum" id="Page48">[48]</span></p> - -<p class="level1">A <i>Rectangle</i> is a parallelogram -having its angles right -angles.</p> - -<p class="level1">A <i>Square</i> is an equilateral -rectangle, <a href="#Fig41">fig. 41</a>.</p> - -<div class="container leftfloat w07em allclear"> - -<div class="container w05em" id="Fig41"> -<img src="images/illo048a.png" alt="Square" /> -<p class="caption">Fig. 41.</p> -</div> - -<div class="container w05em" id="Fig42"> -<img src="images/illo048b.png" alt="Rhombus" /> -<p class="caption">Fig. 42.</p> -</div> - -<div class="container w05em" id="Fig43"> -<img src="images/illo048c.png" alt="Trapezium" /> -<p class="caption">Fig. 43.</p> -</div> - -<div class="container" id="Fig44"> -<img src="images/illo048d.png" alt="Trapezoid" /> -<p class="caption">Fig. 44.</p> -</div> - -</div><!--container--> - -<div class="container rightfloat w07em" id="Fig4549"> - -<img src="images/illo048e.jpg" alt="Polyhedrons" /> -<p class="caption">Figs. 45-49.</p> - -</div><!--container--> - -<p class="level1">A <i>Rhomboid</i> is an oblique-angled -parallelogram.</p> - -<p class="level1">A <i>Rhombus</i> is an equilateral -rhomboid, <a href="#Fig42">fig. 42</a>.</p> - -<p class="level1">A <i>Trapezium</i> is a quadrilateral -having no two sides parallel, -<a href="#Fig43">fig. 43</a>.</p> - -<p class="level1">A <i>Trapezoid</i> is a quadrilateral -in which two opposite sides -are parallel, and the other two -oblique, <a href="#Fig44">fig. 44</a>.</p> - -<p class="level0"><b>A POLYHEDRON</b> is a solid bounded -by planes. There are five regular -solids which are shown in -<a href="#Fig4549">figs. 45, 46, 47, 48 and 49</a>. A -regular solid is bounded by -similar and regular plane figures.</p> - -<p class="level1"><a href="#Fig4549">Fig. 45</a>.—The <i>tetrahedron</i>, -bounded by four equilateral -triangles.</p> - -<p class="level1"><a href="#Fig4549">Fig. 46</a>.—The <i>hexahedron</i>, -or cube, bounded by six squares.</p> - -<p class="level1"><a href="#Fig4549">Fig. 47</a>.—The <i>octahedron</i>, -bounded by eight equilateral -triangles.</p> - -<p class="level1"><a href="#Fig4549">Fig. 48</a>.—The <i>dodecahedron</i>, -bounded by twelve pentagons.</p> - -<p class="level1"><a href="#Fig4549">Fig. 49</a>.—The <i>icosahedron</i>, -bounded by twenty equilateral -triangles.</p> - -<p><span class="pagenum" id="Page49">[49]</span></p> - -<p class="level0"><b>PRISM.</b>—A solid whose bases or ends are very similar -plane figures, and whose sides are parallelograms; -prisms are called triangular, square, etc., according -as the bases are triangles, squares, etc.</p> - -<p class="level0"><b>PRODUCE.</b>—To continue or extend.</p> - -<p class="level0"><b>PROFILE.</b>—An outline or contour.</p> - -<p class="level0"><b>PROJECTION.</b>—The view of an object obtained upon -a plane by projecting lines perpendicular to the -plane.</p> - -<p class="level0"><b>QUADRANT.</b>—The fourth part; a quarter; the quarter -of a circle.</p> - -<p class="level0"><b>QUADRISECT.</b>—To divide into four equal parts.</p> - -<p class="level0"><b>SECTION.</b>—A projection upon a plane parallel to a -cutting plane which intersects any object. The -section generally represents the part behind the -cutting plane, and represents the cut surfaces by -diagonal lines.</p> - -<p class="level0"><b>SECTIONAL.</b>—Showing the section made by a plane.</p> - -<p class="level0"><b>SHADOW.</b>—Shade and shadow have about the same -meaning.</p> - -<p class="level0"><b>SOLID.</b>—A solid has three dimensions—length, breadth -and thickness.</p> - -<p class="level0"><b>SPHERE.</b>—A solid bounded by a curved surface every -point of which is equally distant from a point -within called the center.</p> - -<p class="level0"><b>SURFACE.</b>—The boundary of a solid. It has but two -dimensions—length and breadth. Surfaces are -plane or curved.</p> - -<p class="level1">A <i>Plane Surface</i> is one upon which a straight -line can be drawn in any direction.</p> - -<p class="level1">A <i>Curved Surface</i> is one no part of which is -plane.</p> - -<p class="level1">The surface of the sphere is curved in every -direction, while the curved surfaces of the cylinder -and cone are straight in one direction.</p> - -<p class="level1">The surface of a solid is no part of the solid, -but is simply the boundary of the solid. It has -two dimensions only, and any number of surfaces -put together will give no thickness.</p> - -<p><span class="pagenum" id="Page50">[50]</span></p> - -<div class="container leftfloat w07em"> - -<div class="container w07em" id="Fig50"> -<img src="images/illo050a.png" alt="Triangle" /> -<p class="caption">Fig. 50.</p> -</div> - -<div class="container w05em" id="Fig51"> -<img src="images/illo050b.png" alt="Triangle" /> -<p class="caption">Fig. 51.</p> -</div> - -<div class="container w05em" id="Fig52"> -<img src="images/illo050c.png" alt="Triangle" /> -<p class="caption">Fig. 52.</p> -</div> - -</div><!--container--> - -<div class="container rightfloat w10em"> - -<div class="container w10em" id="Fig53"> -<img src="images/illo050d.png" alt="Triangle" /> -<p class="caption">Fig. 53.</p> -</div> - -<div class="container w10em" id="Fig54"> -<img src="images/illo050e.png" alt="Triangle" /> -<p class="caption">Fig. 54.</p> -</div> - -</div><!--container--> - -<p class="level0"><b>SYMMETRY.</b>—<i>Design.</i> A proper adjustment or adaptation -of parts to one another and to the whole.</p> - -<p class="level0"><b>TRISECT.</b>—To divide into three equal parts.</p> - -<p class="level0" id="Ref6"><b>TRIANGLE.</b>—A triangle is a polygon having three -sides and three angles. <i>Tri</i> is a Latin prefix signifying -three; hence a Triangle is literally a figure -containing three angles.</p> - -<p class="level1">A <i>Scalene Triangle</i> is one -in which no two sides are equal. -See <a href="#Fig50">fig. 50</a>.</p> - -<p class="level1">An <i>Isosceles Triangle</i> is one -in which two of the sides are -equal. See <a href="#Fig51">fig. 51</a>.</p> - -<p class="level1">An <i>Equilateral Triangle</i> is -one in which the three sides are -equal. An <i>Equiangular Triangle</i> -is one having its three angles -equal. An <i>Acute-Angled Triangle</i> -is one in which each angle is acute.</p> - -<p class="level1">A <i>Right-Angled Triangle</i> is -one which has one of the angles a -right angle. See <a href="#Fig53">fig. 53</a>.</p> - -<p class="level1">An <i>Obtuse-Angled Triangle</i> -is one having an -obtuse angle. <a href="#Fig54">Fig. 54</a>.</p> - -<p class="level1">Equiangular triangles are also equal sided, -and vice versa.</p> - -<p><span class="pagenum" id="Page51">[51]</span></p> - -<p class="level0"><b>VERTICAL.</b>—Upright or perpendicular. Vertical and -perpendicular are not synonymous terms.</p> - -<p class="level0"><b>VERTEX.</b>—See <a href="#Ref4">Angle</a>, -<a href="#Ref5">Quadrilateral</a>, <a href="#Ref6">Triangle</a>. The -vertex of a solid is the point in which its axis intersects -the lateral surface.</p> - -<p class="level0"><b>VIEW.</b>—See <a href="#Ref7">Elevation</a>. Views are called front, top, -right or left side, back, or bottom, according as -they are made on the different planes of projection. -They are also sometimes named according to the -part of the object shown, as edge view, end view, -or face view.</p> - -<p class="level0"><b>WORKING DRAWING.</b>—One which gives all the information -necessary to enable the workman to -construct the object.</p> - -</div><!--definitions--> - -<p><span class="pagenum" id="Page52">[52]</span></p> - -<div class="container w30em"> -<img src="images/illo052.jpg" alt="Knife" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page53">[53]</span></p> - -<div class="container w30em"> -<img src="images/illo053.png" alt="FREEHAND DRAWING" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page54">[54]</span></p> - -<div class="container w40em" id="Fig55"> -<img src="images/illo054.png" alt="Free(-)hand Drawing" /> -<p class="caption">Fig. 55.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page55">[55]</span></p> - -<h2 class="nobreak">Free-Hand Drawing.</h2> - -</div><!--chapter--> - -<p>A free-hand drawing is executed with the unaided -hand and eye, without guiding instruments or other -artificial help. It is necessary to be known that all -drawing required cannot possibly be done by rule and -compass, but that some portions must be drawn “free-hand,” -trusting to the eye alone.</p> - -<p>Hence, it is important that the student should be -able to sketch at sight from objects he may see, or to -draw roughly, with a piece of chalk or a pencil, pieces -of mechanism required to be represented.</p> - -<p>Practice in free-hand should go along with mechanical -drawing as progress is made, and thus cultivating -both branches equally.</p> - -<p>“A simple sketch will often,” as has been rather -roughly said, “express more than yards of talk.”</p> - -<p>Even a slight sketch refreshes the memory, and in -the case of the preparation of a complete set of drawings, -with a view to the making of a thoroughly finished -mechanical drawing, the proper course to pursue is, to -make a general sketch, letter the various parts for -reference, and then prepare a series of detailed sketches, -similarly lettered, and diffuse with dimensions.</p> - -<p>Everyone, whatever his specialty, feels to-day that -the ability to sketch rapidly and clearly is among the -absolute necessities for correct and prompt transactions -of business, in giving and executing orders and doing -business with persons outside his profession.</p> - -<p><span class="pagenum" id="Page56">[56]</span></p> - -<p>Mistakes and misunderstandings may be averted -by means of rough sketches taken at the time and -shown for confirmation; this also saves assistants from -getting into trouble, especially if they pin the sketch -to the order, for reference, in case of the arising of -any dispute. These are a few of the advantages of -knowing how to sketch quickly and correctly.</p> - -<p>In “free-hand” any sort of pencil is better than -none, but there is a considerable advantage in having a -good serviceable article—a pencil not too soft nor too -hard, and one which will retain its point for some little -time.</p> - -<p><a href="#Fig55">Fig. 55</a> shows the approved position in which the -pencil should be held while sketching. The pencil -should be held firmly between the thumb and first -finger of the right hand; press the second finger against -the pencil at the opposite side to the thumb pressure, -so that the pencil is firmly held by the contact of the -thumb and two fingers—the third and fourth fingers -just coming into easy reach of the paper surface—the -wrist or ball of the hand resting lightly on the surface -of the work—the arm resting on the desk or drawing-board -for steadiness.</p> - -<p>The motion of the pencil is produced from the -movement of the fingers and thumb, principally in the -vertical strokes, and the horizontal strokes are produced -by fingers and thumb, combined with a wrist or -elbow motion; the oblique lines and curves are produced -with a free movement, with nothing cramped or -confined about the finger joints.</p> - -<h3>POSITION.</h3> - -<p>It should be observed that nothing is more prejudicial -to good execution than the habit of leaning over -the paper, which ought to be placed on a surface sufficiently -inclined to bring every portion equally under -the eye, thus obviating the necessity of leaning forward. -All support to the figure should be obtained by resting -on the left arm, the right being left free for work. By -attention to these rules that awkwardness of position,<span class="pagenum" id="Page57">[57]</span> -so detrimental to a good figure, will be avoided. It is -better to have the light on the left hand, as in this direction -the shadow of the pencil does not interfere with -the view of the drawing.</p> - -<div class="container leftfloat w15em" id="Fig56"> -<img src="images/illo057.jpg" alt="Pencil sharpening" /> -<p class="caption">Fig. 56.</p> -</div> - -<h3>HOW TO CUT A PENCIL.</h3> - -<p>Hold the pencil firmly in the -left hand, as in the drawing, -allowing about an inch to project -beyond the fingers, and -turn it gradually as the knife -removes the wood. The knife -should be held so that the blade -alone projects beyond the -fingers, and the part of it -nearest the handle used for cutting. -The pencil should be -placed against the inside of the -thumb of the right hand, as in -the drawing (<a href="#Fig56">fig. 56</a>), and the wood removed by slight -shaving. The lead should not be cut at the same time -as the wood, but rested on the thumb and pared -gently afterwards; by attention to these directions the -pencil will be economized.</p> - -<h3>HOW TO DRAW STRAIGHT LINES.</h3> - -<p>Before a line is drawn, the point at which it is to -commence and the point where it is to end, should be -known; and let it be distinctly understood that <i>this -judgment of the eye</i>, and placing of points, should invariably -precede the drawing of every line.</p> - -<p>The first effort should, therefore, be to produce a -line of points exactly parallel with the upper edge of -the paper, and at equal distances from each other. -Commence with point <i>A</i> and place the point <i>B</i> carefully -level with it, now place a slip of paper against -these points in the original, mark their distance apart, -and see if the same proportion has been given in your -copy; if not, make the necessary correction. Proceed -with the next point, examine it, and so on to the end of<span class="pagenum" id="Page58">[58]</span> -the line. When this is complete, examine each point -in succession, to try if it is at the same distance from -the top of the paper; when this is correct, proceed to -draw the first level line. Hold the pencil as in the -drawing, <a href="#Fig57">fig. 57</a>, keeping the elbow near the side; -join <i>A</i> to <i>B</i> by one light, steady stroke, produced by a -movement of the wrist, and add stroke upon stroke -until the line is of the required depth. Continue this -process to the end of the line of points. Now place -the point <i>D</i> at the right distance below the <i>A</i>, proceed -with the points for another line as before, and continue -the lines until the paper is covered. In producing the -stroke the pencil should not be jerked, or any stop be -made between the points, but the movement should be -even throughout, and it is much better to produce each -line by several soft strokes, as <i>the repetition of delicate -lines induces lightness of touch and freedom of hand</i>; -and it is also no small advantage that lines thus produced -are more easily removed by the India rubber, -should they require correction.</p> - -<h3>TO DRAW THE FIRST OBLIQUE LINE.</h3> - -<p>Prepare three rows of points down the side of the -paper, on the left hand; examine them to see that they -are at equal distances from the side and from each -other; hold the pencil as in the drawing, <a href="#Fig58">fig. 58</a>, move -the elbow a little from the side, and join the points <i>A</i> -and <i>B</i> with one light line, produced by a movement of -the fingers and thumb, repeating the strokes until the -line is of the requisite depth; proceed to join <i>B</i> to <i>C</i>, -taking care previously to bring the hand a little down -the paper, as the line from <i>A</i> to <i>C</i> is too long to be -produced from one position. When the three rows of -points are filled, make another set, examine them and -proceed as before. By these means the paper will be -covered with oblique lines, and if the points have been -placed exactly, the sheet will have a neat and regular -appearance.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—The drawings of hands are introduced to show the -positions for holding the pencil, and are not intended for copying.</p> - -</div><!--note--> - -<p><span class="pagenum" id="Page59">[59]</span></p> - -<div class="container w40em" id="Fig57"> -<img src="images/illo059.png" alt="Drawing lines" /> -<p class="caption">Fig. 57.</p> -</div> - -<p><span class="pagenum" id="Page60">[60]</span></p> - -<div class="container w40em" id="Fig58"> -<img src="images/illo060.png" alt="Drawing lines" /> -<p class="caption">Fig. 58.</p> -</div> - -<p><span class="pagenum" id="Page61">[61]</span></p> - -<p>It is a common, and at the same time highly injurious -habit, to draw this line by a movement of the -wrist, the fingers remaining rigid. This may be detected -by watching the action of the thumb; if it bends -as the line is produced, all is right; but if it does not -the wrist is at work.</p> - -<h3>TO DRAW THE UPRIGHT OR PERPENDICULAR LINE.</h3> - -<p>This line demands the greatest attention, and any -care bestowed upon it will be amply repaid in the after -studies.</p> - -<p>Commence by placing a line of points down the -side of the paper, examine them very carefully to see -that they are all the same distance from its edge, hold -the pencil as in the drawing, <a href="#Fig59">fig. 59</a>, move the elbow -well out from the side, and join the points by a movement -of the fingers and thumb. When one line is -complete, place the points for the next, and examine -them from the edge of the paper, not from the line just -drawn. Proceed in this manner until the paper is covered.</p> - -<p>There is in most cases a tendency to place the -points for this line in a slightly inclined direction, as in -writing, though in some instances the tendency is the -opposite, a thoroughly correct eye in this respect being -a rare gift: and it may be useful to suggest that the -paper be so placed that the line of points to be produced -may be exactly in front of the eye.</p> - -<h3>TO DRAW THE SECOND OBLIQUE LINE.</h3> - -<p>Prepare three rows of points down the side of the -paper, examine them for correctness of position, hold -the pencil as in the drawing, <a href="#Fig60">fig. 60</a>, remove the elbow -as far as possible from the side, and join the points by -a movement of the fingers and thumb, and continue the -exercise until the paper is covered.</p> - -<p><span class="pagenum" id="Page62">[62]</span></p> - -<div class="container w40em" id="Fig59"> -<img src="images/illo062.png" alt="Drawing lines" /> -<p class="caption">Fig. 59.</p> -</div> - -<p><span class="pagenum" id="Page63">[63]</span></p> - -<div class="container w40em" id="Fig60"> -<img src="images/illo063.png" alt="Drawing lines" /> -<p class="caption">Fig. 60.</p> -</div> - -<p>It will be noticed that each change in direction -of the line to be drawn, has been accompanied with a<span class="pagenum" id="Page64">[64]</span> -corresponding change in the position of the elbow and -wrist. The following simple rule will assist the memory -when placing the hand for any given line; the -pencil should be held so that it may form a T with the -line to be drawn:</p> - -<div class="trule image"> -<img src="images/illo064a.png" alt="T-rule" /> -</div> - -<div class="trule text"> -<p>For the horizontal line, elbow near -the side.</p> -</div> - -<p class="thinline allclear"> </p> - -<div class="trule image"> -<img src="images/illo064b.png" alt="T-rule" /> -</div> - -<div class="trule text"> -<p>For the first oblique, elbow a little -removed.</p> -</div> - -<p class="thinline allclear"> </p> - -<div class="trule image"> -<img src="images/illo064c.png" alt="T-rule" /> -</div> - -<div class="trule text"> -<p>For the perpendicular, elbow more -removed.</p> -</div> - -<p class="thinline allclear"> </p> - -<div class="trule image"> -<img src="images/illo064d.png" alt="T-rule" /> -</div> - -<div class="trule text"> -<p>For the second oblique, elbow most -removed.</p> -</div> - -<p class="thinline allclear"> </p> - -<div class="container rightfloat w15em x-ebookmaker-drop"> - -<p class="fingerlines">Finger and thumb lines.</p> - -<div class="split1090"> - -<div class="left1090"> -<p class="wristlines">W<br />r<br />i<br />s<br />t<br /> <br />l<br />i<br />n<br />e<br />s<br />.</p> -</div> - -<div class="right1090"> - -<div class="split9208"> - -<div class="left9208"> - -<div class="container nomargin w12em"> -<img src="images/illo064e.png" alt="Lines" /> -</div> - -</div><!--left9208--> - -<div class="right9208"> -<p class="wristlines">W<br />r<br />i<br />s<br />t<br /> <br />l<br />i<br />n<br />e<br />s<br />.</p> -</div> - -</div><!--split9208--> - -</div><!--right1090--> - -<p class="thinline allclear"> </p> - -</div><!--split1090--> - -<p class="fingerlines">Finger and thumb lines.</p> - -</div><!--container--> - -<div class="noscr"> - -<div class="container w12em"> -<img src="images/illo064e1.png" alt="Lines" /> -</div> - -</div><!--noscr--> - -<p>It may also be interesting to notice, with regard to -the movements by which lines are produced, that they -are divided into two systems; the first is that of the -wrist, which includes the horizontal, and lines in nearly -the same direction; -the second is that of -the fingers and -thumb, by which all -other lines are -formed. The following -diagram exhibits -the two systems and -their various lines -grouped, and it will -be observed that -there is a space marked (a) between the two sets, which -may be considered neutral ground. Lines in this -direction may be produced by either movement, as -may be most convenient, but it will always be found -that these lines are the most trying to the hand.</p> - -<p><span class="pagenum" id="Page65">[65]</span></p> - -<h3>ON FIGURES FORMED OF STRAIGHT LINES.</h3> - -<p>Before commencing this subject, let it be clearly -understood that future success will, in a great measure, -depend upon the amount of care bestowed upon it. -The aim should be to obtain absolute accuracy, and for -this end the copies should be tested by the most careful -measurements, and corrected until they are true -with the originals, but it should be distinctly understood -that these measurements are only to be made -after the eye and hand have done their best.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—To some it may appear that too much time and care -has been bestowed on mere lines, but let it be understood that a -good system of line drawing is the basis of all education—the -slightest outline by a hand thus trained has a bold, free and -masterly character; and with regard to shading, which is simply -an aggregation of good lines, it is only by such a practiced hand -its most charming effects can be produced.</p> - -</div><!--note--> - -<p><a href="#Fig6667">Fig. 66</a>: Place the points <i>A</i>, <i>B</i>. Examine them -to see that they are the same distance apart as in the -original, and that they are level; place the point <i>C</i> exactly -under <i>A</i>, and make <i>A C</i> equal in distance to <i>A B</i>; -now place the point <i>D</i> opposite <i>C</i> and under <i>B</i>; try -the distances between each point to see that they are -the same; divide each side by a point half way, and -then draw the lines.</p> - -<p><a href="#Fig6667">Fig. 67</a>: Repeat the last figure and add the -lines <i>A</i> and <i>B</i>, taking great care that the points for -them are correctly placed.</p> - -<p><a href="#Fig6869">Fig. 68</a>: Commence with the square as before; -then join the half-way points.</p> - -<p><a href="#Fig6869">Fig. 69</a>: After the square is drawn, place the -points <i>A</i> and <i>B</i> at the right height above the half-way -points, and <i>C</i>, <i>D</i> at the proper distance from the corners, -then draw the figure.</p> - -<p><a href="#Fig7071">Fig. 70</a>: The greatest care should be taken with -the squares for this and the following figure, as the -slightest error in them will destroy the symmetry of -the drawing within; when the square is completed, join -the opposite corners, and place on the crossed lines the -points <i>B</i>, <i>C</i>, <i>D</i>, <i>E</i>; examine these to see that they are -each at the same distance from the centre <i>A</i>, and that -this distance is equal to the space from <i>A</i> to the sides -of the square; when all are proved to be correct, complete -the figure.</p> - -<p><span class="pagenum" id="Page66">[66]</span></p> - -<div class="container w40em" id="Fig6667"> -<img src="images/illo066.png" alt="Figures" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 66.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 67.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page67">[67]</span></p> - -<div class="container w40em" id="Fig6869"> -<img src="images/illo067.png" alt="Figures" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 68.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 69.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page68">[68]</span></p> - -<div class="container w40em" id="Fig7071"> -<img src="images/illo068.png" alt="Figures" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 70.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 71.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page69">[69]</span></p> - -<p><a href="#Fig7071">Fig. 71</a>: Repeat the last drawing with, if possible, -greater exactness, and outside the octagon place -the points <i>A</i>, <i>B</i>, <i>C</i>, <i>D</i>, etc.; examine each of these -points to see that they are all at the same distance -from the centre, and then complete the figure.</p> - -<h3>ON CURVED LINES.</h3> - -<div class="container rightfloat w15em"> -<img src="images/illo069a.png" alt="Curves" /> -</div> - -<p>The right position of the hand for drawing any -curved line is that required for a straight line which -would touch the extremities of -the curve. The straight lines -given in the exercises are valuable, -not only as a guide to the -position of the hand, but as an assistance to the eye -when forming the curves or examining them after they -are produced.</p> - -<p>The direction given for drawing a straight line was -to form it by one steady movement from point to point, -without any jerk or stop by the way. This instruction -requires to be changed for the curve, <i>which is better -produced by several short strokes</i>, thus:</p> - -<div class="container w20em"> -<img src="images/illo069b.png" alt="Curves" /> -</div> - -<p class="noindent">or by overlapping -lines, any outside bits -being cleared away -with India rubber.</p> - -<p>These exercises will test the drawing power and -try the patience of the pupil, but they are worthy of all -the care which can be bestowed, which in future efforts -will meet with its full reward.</p> - -<p><a href="#Fig7677">Fig. 76</a>: Draw first the square as directed in the -previous lesson, join the points <i>A</i>, <i>B</i>, <i>C</i> and add the -short lines at <i>E</i> and <i>F</i>, proceed with the curve <i>A B</i>, -drawing it with faint lines at first, and adding stroke -upon stroke until the required depth is obtained; the -curve <i>A C</i> is more difficult to produce, in consequence -of the formation of the hand; it should, therefore, be -drawn in shorter pieces, joining them together afterwards -by over strokes.</p> - -<p><span class="pagenum" id="Page70">[70]</span></p> - -<div class="container w40em" id="Fig7677"> - -<img src="images/illo070.png" alt="Drawings" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 76.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 77.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page71">[71]</span></p> - -<div class="container rightfloat w05em"> -<img src="images/illo071.png" alt="Oval" /> -</div> - -<p><a href="#Fig7677">Fig. 77</a>: Draw the square and straight -lines first, then add the curves, taking -care to give the greatest fullness at the -right place.</p> - -<p><a href="#Fig7879">Fig. 78</a>: Draw the square and straight -lines, proceed with the curves, taking care -to make each of the same proportion.</p> - -<p><a href="#Fig7879">Figs. 79</a> and <a href="#Fig8081">80</a>: The ovals contained -in these figures are simply foreshortened -circles, and as such forms are of frequent -occurrence in sketching from objects, in bridges, -wheels, ends of timber, etc., they should be carefully -studied; the greatest difficulty is to turn the narrow -ends, and prevent their looking like corners. For this -purpose it is better to draw the short curves first, thus:</p> - -<p class="noindent">and then join the longer sides to them.</p> - -<p><a href="#Fig8081">Fig. 81</a>: If this figure can be drawn correctly, a -great success has been achieved; the circle is a most -difficult form to delineate, and without system could -not be accomplished. Draw the square and straight -lines within it with great care, examine each point of -the octagon to see that it is at the same distance from -the centre, and then draw the circle.</p> - -<h3>EXAMPLES FOR PRACTICE.</h3> - -<p>Several figures, <a href="#Fig83">83</a> to <a href="#Fig96">96</a>, representing more or less -familiar parts of machines, utilities, etc., are introduced -for practice in free-hand, <span class="nowrap">but—</span></p> - -<p>It must be noted that even in free-hand the wise -student will occasionally use the straight edge and -compasses, so as to make his first attempts fairly creditable. -Many good draughtsmen have begun by simply -copying such figures and illustrations as are used -throughout this volume and other similar sources; -perhaps there is nothing better for practice or training -than the copying and reproducing of samples of good -mechanical drawings, yet it must always be remembered -that advancement in free-hand must be made in -the line of less to greater efforts, and that the why and -wherefore will be constantly asked by the aspiring student; -that good and correct drawings are to be aimed -for at all times in every line and dimension—never -forgetting the law of proportion in the smallest outlines -of objects to be represented.</p> - -<p><span class="pagenum" id="Page72">[72]</span></p> - -<div class="container w40em" id="Fig7879"> - -<img src="images/illo072.png" alt="Figures" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 78.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 79.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<p><span class="pagenum" id="Page73">[73]</span></p> - -<div class="container w40em" id="Fig8081"> - -<img src="images/illo073.png" alt="Figures" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 80.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 81.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<p><span class="pagenum" id="Page74">[74]</span></p> - -<p><a href="#Fig83">Fig. 83</a> is a section, or end view of a bar of angle -iron; the student will find helpful practice in attempting -this figure; he may be allowed to use a straight-edge -in drawing the lines, but no measurements; the -work should be tested on completion by a rule, or -better by penciling from the original on tracing paper, -and comparing the free-hand with the copy, when the -defective proportions, if any, will be clearly exhibited.</p> - -<p><a href="#Fig84">Fig. 84</a> is a section of tee iron, and <a href="#Fig85">fig. 85</a> is a -section of channel iron. These three figures on <a href="#Page75">page -75</a> should be practiced alternately, although seeming -similar in shape.</p> - -<p><a href="#Fig86">Fig. 86</a> is a side and end view of an angle plate -shaded. <a href="#Fig87">Fig. 87</a> is a wrench shaded.</p> - -<p>Examples of bolt ends are shown in the two next -numbers; <a href="#Fig8891">fig. 88</a> exhibits the common square-head -bolt, and <a href="#Fig8891">fig. 89</a> the hexagon or six-sided bolt-head; -these are also examples of <i>straight-line shading</i>. <a href="#Fig8891">Fig. -90</a> is a lathe-dog, and shows an example of <i>curved -shading</i>; <a href="#Fig9293">fig. 92</a> is an engine crank, and an example of -<i>straight and curved shading</i>; <a href="#Fig8891">fig. 91</a> is a screw clamp.</p> - -<p><a href="#Fig9293">Fig. 93</a> is a section of boiler plates riveted together; -a caulking tool is also shown.</p> - -<p>In the example, <a href="#Fig9495">fig. 94</a>—a hand-wheel—the principal -difficulty, even for the most advanced student -in free-hand, will be in drawing the circles; a coin, if -convenient, can be used to scribe about, in drawing -these; the other parts can afterwards be filled in around -the circle. <a href="#Fig96">Fig. 96</a> is introduced for practice in penciling -and shading; the figure represents a water-wheel -on a stone pier.</p> - -<p>The familiar oil can is shown in <a href="#Fig9495">fig. 95</a>. These all -are excellent objects for practice.</p> - -<p><span class="pagenum" id="Page75">[75]</span></p> - -<div class="split2575"> - -<div class="left2575"> - -<div class="container" id="Fig83"> -<img src="images/illo075a.png" alt="" /> -</div> - -</div><!--left2575--> - -<div class="right2575"> - -<div class="split5050"> - -<div class="left5050"> - -<div class="container" id="Fig84"> -<img src="images/illo075b.png" alt="" /> -</div> - -</div><!--left5050--> - -<div class="right5050"> - -<div class="container" id="Fig85"> -<img src="images/illo075c.png" alt="" /> -</div> - -</div><!--right5050--> - -</div><!--split5050--> - -</div><!--right2575--> - -<p class="thinline allclear"> </p> - -<p class="caption">Fig. 83.—Fig. 84.—Fig. 85.</p> - -</div><!--split2575--> - -<div class="split5050"> - -<div class="left5050"> - -<div class="container" id="Fig86"> -<img src="images/illo075d.png" alt="" /> -</div> - -</div><!--left5050--> - -<div class="right5050"> - -<div class="container" id="Fig87"> -<img src="images/illo075e.png" alt="" /> -</div> - -</div><!--right5050--> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 86.</p> -</div><!--left5050--> - -<div class="right5050"> -<p class="caption">Fig. 87.</p> -</div><!--right5050--> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -<p><span class="pagenum" id="Page76">[76]</span></p> - -<div class="container" id="Fig8891"> - -<img src="images/illo076a.jpg" alt="Drawings" /> - -<p class="caption">Fig. 88.—Fig. 89.—Fig. 90.—Fig. 91.</p> - -</div><!--container--> - -<div class="container" id="Fig9293"> - -<img src="images/illo076b.jpg" alt="Drawings" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 92.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 93.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p><span class="pagenum" id="Page77">[77]</span></p> - -<div class="container" id="Fig9495"> - -<img src="images/illo077.jpg" alt="" /> - -<div class="split6040"> - -<div class="left6040"> -<p class="caption">Fig. 94.</p> -</div> - -<div class="right6040"> -<p class="caption">Fig. 95.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split6040--> - -</div><!--container--> - -<p><span class="pagenum" id="Page78">[78]</span></p> - -<div class="container w25em" id="Fig96"> -<img src="images/illo078.jpg" alt="Water wheel" /> -<p class="caption">Fig. 96.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page79">[79]</span></p> - -<div class="container w30em"> -<img src="images/illo079.png" alt="GEOMETRICAL DRAWING" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page80">[80]</span></p> - -<div class="container w40em"> -<img src="images/illo080.png" alt="Drawing tools" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page81">[81]</span></p> - -<h2 class="nobreak">Geometrical Drawing.</h2> - -</div><!--chapter--> - -<p>Geometry is the science of measurement; it has -been known for more than three thousand years; -many lives have been devoted to its development, and -it exists to-day as the foundation of all mathematics.</p> - -<p>Geometrical drawing is the art of representing, to -the eye, the problems “worked out” by geometricians, -and the importance of a knowledge of geometrical -drawing is paramount. The student will find that the -figures delineated and explained in the next few pages -constantly occur in mechanical drawing. Says Walter -Smith, State Director of Art Education in Massachusetts, -“I have never known a case where a student did -not progress more satisfactorily in his studies after a -course of practical geometry.”</p> - -<p>The elementary conceptions of geometry are few:</p> - -<div class="diagonalp"> - -<p>1.—A point.<br /> -<span class="padl4">2.—A line.</span><br /> -<span class="padl8">3.—A surface.</span><br /> -<span class="padl12">4.—A solid, and</span><br /> -<span class="padl16">5.—An angle.</span></p> - -</div><!--diagonalp--> - -<p>All of which elements are used in mechanical drawings.</p> - -<p>From these, as data, a vast number of mathematical -problems have been deduced; of which a few of -the most elementary will be illustrated in this work; -but these few will repay the attention of the student.</p> - -<p>In “freehand” drawing the crayon and pencil -are used; in geometrical drawings the dividers, as<span class="pagenum" id="Page82">[82]</span> -shown in illustration, <a href="#Fig97">fig. 97</a>, together with a rule, are -all that is necessary to accomplish the work.</p> - -<p>A problem is something to be done, and geometry -has been defined as the science of measurement; the -relation between geometry and mechanical drawing -is very close, hence the term “geometrical problem.”</p> - -<div class="container w40em" id="Fig97"> -<img src="images/illo082a.jpg" alt="Compasses" /> -<p class="caption">Fig. 97.</p> -</div> - -<div class="container w40em" id="Fig98"> -<img src="images/illo082b.jpg" alt="Ruler" /> -<p class="caption">Fig. 98.</p> -</div> - -<p>Before proceeding with the examples, a few -elementary statements belonging to the science of -geometry are presented; these will be useful to the -student, not only while “doing” the problems, but in -many cases of every-day—future—experience.</p> - -<p>Geometry is one of the oldest and simplest of -sciences; it may be defined as <i>the science of measurement</i>; -geometry is <i>the root</i> from which all regular -mathematical calculations issue. It has claimed the -best thought of practical men from the times of the -Greeks and Romans two thousand years ago; they -derived their knowledge of the science from the Egyptians, -who in turn were indebted to the Chaldeans and -Hindoos in times beyond any authentic history; -hence it was under the operations of -the laws explained in geometry, that the pyramids -of Egypt and the temples of Greece were -constructed, as well as the engines of war and -appliances of peace of ancient times.</p> - -<p><i>A point</i> is mere position, and has no magnitude.</p> - -<p><i>A line</i> is that which has extension in length only. -The extremities of lines are points.</p> - -<p><i>A surface</i> is that which has extension in length -and breadth only.</p> - -<p><span class="pagenum" id="Page83">[83]</span></p> - -<div class="container leftfloat w03em"> -<img src="images/illo083a.png" alt="Angle" /> -</div> - -<p><i>A solid</i> is that which has extension in length, -breadth and thickness.</p> - -<p><i>An angle</i> is the difference in the direction -of two lines proceeding from the same -point.</p> - -<p>Lines, Surfaces, Angles and Solids constitute the -different kinds of quantity called <i>geometrical</i> magnitudes.</p> - -<div class="container allclear leftfloat w03em"> -<img src="images/illo083b.png" alt="Lines" /> -</div> - -<p><i>Parallel lines</i> are lines which have the -same direction; hence parallel lines can -never meet, however far they may be produced; for -two lines taking the same direction cannot approach or -recede from each other.</p> - -<p>An <i>Axiom</i> is a self-evident truth, not only too -simple to require, <i>but too simple to admit of demonstration</i>.</p> - -<p>A <i>Proposition</i> is something which is either proposed -to be done, or to be demonstrated, and is either a -problem or a theorem.</p> - -<p>A <i>Problem</i> is something proposed to be done.</p> - -<p>A <i>Theorem</i> is something proposed to be demonstrated.</p> - -<p>A <i>Hypothesis</i> is a supposition made with a view to -draw from it some consequence which establishes the -truth or falsehood of a proposition, or solves a problem.</p> - -<p>A <i>Lemma</i> is something which is premised, or -demonstrated, in order to render what follows more -easy.</p> - -<p>A <i>Corollary</i> is a consequent truth derived immediately -from some preceding truth or demonstration.</p> - -<p>A <i>Scholium</i> is a remark or observation made upon -something going before it.</p> - -<p>A <i>Postulate</i> is a problem, the solution of which is -self-evident.</p> - -<p>Let it be <span class="nowrap">granted—</span></p> - -<p><span class="dontshow">II</span>I. That a straight line can be drawn from any -one point to any other point;</p> - -<p><span class="pagenum" id="Page84">[84]</span></p> - -<p><span class="dontshow">I</span>II. That a straight line can be produced to any -distance, or terminated at any point;</p> - -<p>III. That the circumference of a circle can be -described about any center, at any distance from that -center.</p> - -<p>The common algebraic signs are used in Geometry, -and it is necessary that the student in geometry should -understand some of the more simple operations of -algebra. As the terms circle, angle, triangle, hypothesis, -axiom, theorem, corollary and definition are constantly -occurring in a course of geometry, they are -abbreviated as shown in the following list:</p> - -<table class="symbols" summary="Symbols"> - -<tr> -<td class="descr">Addition is expressed by</td> -<td class="symbol">+</td> -</tr> - -<tr> -<td class="descr">Subtraction is expressed by</td> -<td class="symbol">-</td> -</tr> - -<tr> -<td class="descr">Multiplication is expressed by</td> -<td class="symbol">×</td> -</tr> - -<tr> -<td class="descr">Equality and Equivalency are expressed by</td> -<td class="symbol">=</td> -</tr> - -<tr> -<td class="descr">Greater than, is expressed by</td> -<td class="symbol">></td> -</tr> - -<tr> -<td class="descr">Less than, is expressed by</td> -<td class="symbol"><</td> -</tr> - -<tr> -<td class="descr"><span class="padl2">Thus <i>B</i> is greater than <i>A</i>, is written</span></td> -<td class="symbol"><i>B</i> > <i>A</i></td> -</tr> - -<tr> -<td class="descr"><span class="padl2"><span class="dontshow">Thus </span><i>B</i> is less than <i>A</i>, is written</span></td> -<td class="symbol"><i>B</i> < <i>A</i></td> -</tr> - -<tr> -<td class="descr">A circle is expressed by</td> -<td class="symbol">O</td> -</tr> - -<tr> -<td class="descr">An angle is expressed by</td> -<td class="symbol">L</td> -</tr> - -<tr> -<td class="descr">A right angle is expressed by</td> -<td class="symbol">R. L</td> -</tr> - -<tr> -<td class="descr">Degrees, minutes and seconds are expressed by</td> -<td class="symbol">° ′ ″</td> -</tr> - -<tr> -<td class="descr">A triangle is expressed by</td> -<td class="symbol">△</td> -</tr> - -<tr> -<td class="descr">The term Hypothesis is expressed by</td> -<td class="symbol">(Hy.)</td> -</tr> - -<tr> -<td class="descr">The term Axiom is expressed by</td> -<td class="symbol">(Ax.)</td> -</tr> - -<tr> -<td class="descr">The term Theorem is expressed by</td> -<td class="symbol">(Th.)</td> -</tr> - -<tr> -<td class="descr">The term Corollary is expressed by</td> -<td class="symbol">(Cor.)</td> -</tr> - -<tr> -<td class="descr">The term Definition is expressed by</td> -<td class="symbol">(Def.)</td> -</tr> - -<tr> -<td class="descr">The term Perpendicular is expressed by</td> -<td class="symbol">⊥</td> -</tr> - -<tr> -<td class="descr">The difference of two quantities, when it is not known which is the greater, is expressed by the symbol</td> -<td class="symbol">~</td> -</tr> - -<tr> -<td class="descr">Thus, the difference between <i>A</i> and <i>B</i> is written</td> -<td class="symbol"><i>A</i> ~ <i>B</i></td> -</tr> - -</table> - -<h3>GEOMETRICAL AXIOMS.</h3> - -<p> 1. <i>Things which are equal to the same thing are -equal to each other.</i></p> - -<p> 2. <i>When equals are added to equals the wholes are -equal.</i></p> - -<p><span class="pagenum" id="Page85">[85]</span></p> - -<p> 3. <i>When equals are taken from equals the remainders -are equal.</i></p> - -<p> 4. <i>When equals are added to unequals the wholes -are unequal.</i></p> - -<p> 5. <i>When equals are taken from unequals the -remainders are unequal.</i></p> - -<p> 6. <i>Things which are double of the same thing, or -equal things, are equal to each other.</i></p> - -<p> 7. <i>Things which are halves of the same thing, or -of equal things, are equal to each other.</i></p> - -<p> 8. <i>The whole is greater than any of its parts.</i></p> - -<p> 9. <i>Every whole is equal to all its parts taken -together.</i></p> - -<p>10. <i>Things which coincide, or fill the same space, -are identical, or mutually equal in all their parts.</i></p> - -<p>11. <i>All right angles are equal to one another.</i></p> - -<p>12. <i>A straight line is the shortest distance between -two points.</i></p> - -<p>13. <i>Two straight lines cannot enclose a space.</i></p> - -<div class="chapter"> - -<p><span class="pagenum" id="Page86">[86]</span></p> - -<h2 class="nobreak">Problems in Geometrical Drawing.</h2> - -</div><!--chapter--> - -<div class="container leftfloat nomargin w12em" id="Fig99"> -<img src="images/illo086a.png" alt="Lines" /> -<p class="caption">Fig. 99.</p> -</div> - -<p><span class="smcap">Example</span> 1.—<i>To bisect</i> -(cut in two) <i>a straight line or -an arc of a circle</i>, <a href="#Fig99">Fig. 99</a>. -From the ends of <i>A B</i> as -centers, describe arcs cutting -each other at <i>C</i> and <i>D</i>, and -draw <i>C D</i>, which cuts the -line at <i>E</i> or the arc at <i>F</i>.</p> - -<p><span class="smcap">Ex.</span> 2.—<i>To draw a perpendicular to a straight line, -or a radial line to a circular arc</i>, <a href="#Fig99">Fig. 99</a>. Operate as -in the foregoing problem. The line <i>C D</i> is perpendicular -to <i>A B</i>; the line <i>C D</i> is also radial to the arc -<i>A B</i>.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w15em" id="Fig100"> -<img src="images/illo086b.png" alt="Perpendiculars" /> -<p class="caption">Fig. 100.</p> -</div> - -<div class="container rightfloat nomargin w12em" id="Fig101"> -<img src="images/illo087a.png" alt="Example" /> -<p class="caption">Fig. 101.</p> -</div> - -<p><span class="smcap">Ex.</span> 3.—<i>To draw a -perpendicular to a straight -line, from a given point in -that line</i>, <a href="#Fig100">Fig. 100</a>. With -any radius from any given -point <i>A</i> in the line <i>B C</i>, -cut the line at <i>B</i> and <i>C</i>. -Next, with a longer radius, -describe arcs from <i>B</i> and <i>C</i>, cutting each other at <i>D</i>, -and draw the perpendicular <i>D A</i>.</p> - -<p><span class="pagenum" id="Page87">[87]</span></p> - -<p><i>Second Method</i>, <a href="#Fig101">Fig. -101</a>. From any center <i>F</i> -above <i>B C</i>, describe a circle -passing through the -given point <i>A</i>, and cutting -the given line at <i>D</i>; draw -<i>D F</i>, and produce it to cut -the circle at <i>E</i>; and draw -the perpendicular <i>A E</i>.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w10em" id="Fig102"> -<img src="images/illo087b.png" alt="Example" /> -<p class="caption">Fig. 102.</p> -</div> - -<p><i>Third Method</i>, <a href="#Fig102">Fig. 102</a>. From -<i>A</i> describe an arc <i>E C</i>, and from <i>E</i>, -with the same radius, the arc <i>A C</i> -cutting the other at <i>C</i>; through <i>C</i> -draw a line <i>E C D</i> and set off <i>C D</i> -equal to <i>C E</i>, and through <i>D</i> draw -the perpendicular <i>A D</i>.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w10em" id="Fig103"> -<img src="images/illo087c.png" alt="Example" /> -<p class="caption">Fig. 103.</p> -</div> - -<div class="container rightfloat nomargin w15em" id="Fig104"> -<img src="images/illo088a.png" alt="Example" /> -<p class="caption">Fig. 104.</p> -</div> - -<p><span class="smcap">Ex.</span> 4.—<i>To draw a perpendicular -to a straight line from -any point without it</i>, <a href="#Fig103">Fig. 103</a>. -From the point <i>A</i> with a sufficient -radius cut the given line at -<i>F</i> and <i>G</i>; and from these points -describe arcs cutting at <i>E</i>. Draw -the perpendicular <i>A E</i>.</p> - -<p>If there be no room below the line, the intersection -may be taken above the line; that is to say, between -the line and the given point.</p> - -<p><span class="pagenum" id="Page88">[88]</span></p> - -<p><i>Second Method</i>, -<a href="#Fig104">Fig. 104</a>. From any two -points <i>B C</i> at some distance -apart, in the given -line, and with the radii -<i>B A</i>, <i>C A</i>, respectively, -describe arcs cutting at -<i>A D</i>. Draw the perpendicular -<i>A D</i>.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w12em" id="Fig105"> -<img src="images/illo088b.png" alt="Example" /> -<p class="caption">Fig. 105.</p> -</div> - -<div class="container rightfloat nomargin w12em" id="Fig106"> -<img src="images/illo088c.png" alt="Example" /> -<p class="caption">Fig. 106.</p> -</div> - -<p><span class="smcap">Ex.</span> 5.—<i>To draw a parallel -line through a given -point</i>, <a href="#Fig105">Fig. 105</a>. With a radius -equal to the given point <i>C</i> -from the given line <i>A B</i>, -describe the arc <i>D</i> from <i>B</i>, taken considerably distant -from <i>C</i>. Draw the parallel through <i>C</i> to touch the -arc <i>D</i>.</p> - -<p><i>Second Method</i>, <a href="#Fig106">Fig. 106</a>. -From <i>A</i>, the given point, -describe the arc <i>F D</i>, cutting -the given line at <i>F</i>; from <i>F</i>, -with the same radius, describe -the arc <i>E A</i>, and set off <i>F D</i>, -equal to <i>E A</i>. Draw the parallel through the points <i>A D</i>.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w15em" id="Fig107"> -<img src="images/illo088d.png" alt="Example" /> -<p class="caption">Fig. 107.</p> -</div> - -<p>When a series of parallels are required perpendicular -to a base line <i>A B</i>, they may be drawn as in <a href="#Fig107">fig. -107</a> through points in -the base line set off at -the required distances -apart. This method is -convenient also where -a succession of parallels -are required to a -given line <i>C D</i>, for the -perpendicular may be -drawn to it, and any number of parallels may be drawn -on the perpendicular.</p> - -<p class="allclear"> </p> - -<p><span class="pagenum" id="Page89">[89]</span></p> - -<div class="container leftfloat nomargin w15em" id="Fig108"> -<img src="images/illo089a.png" alt="Example" /> -<p class="caption">Fig. 108.</p> -</div> - -<div class="container rightfloat nomargin w12em" id="Fig109"> -<img src="images/illo089b.png" alt="Example" /> -<p class="caption">Fig. 109.</p> -</div> - -<p><span class="smcap">Ex.</span> 6.—<i>To divide a line into a number of equal -parts</i>, <a href="#Fig108">Fig. 108</a>.</p> - -<p>To divide the -line <i>A B</i> into, say, -five parts. From <i>A</i> -and <i>B</i> draw parallels -<i>A C</i>, <i>B D</i> on opposite -sides; set off any -convenient distance four times (one less than the given -number), from <i>A</i> on <i>A C</i>, and on <i>B</i> on <i>B D</i>; join the -first on <i>A C</i> to the fourth on <i>B D</i>, and so on. The -lines so drawn divide <i>A B</i> as required.</p> - -<p><i>Second Method</i>, <a href="#Fig109">Fig. 109</a>. -Draw the line at <i>A C</i>, at an -angle from <i>A</i>, set off, say, five -equal parts; draw <i>B</i> 5, and -draw parallels to it from the -other points of division in <i>A -C</i>. These parallels divide <i>A -B</i> as required.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w20em" id="Fig110"> -<img src="images/illo089c.png" alt="Example" /> -<p class="caption">Fig. 110.</p> -</div> - -<p><span class="smcap">Ex.</span> 7.—<i>Upon a straight line to draw an angle -equal to a given angle</i>, <a href="#Fig110">Fig. 110</a>. Let <i>A</i> be the given -angle and <i>F G</i> the line. With any radius from the -points <i>A</i> and <i>F</i>, describe arcs <i>D E</i>, <i>I H</i>, cutting the -sides of the angle <i>A</i> and the line <i>F G</i>.</p> - -<p>Set off the arc <i>I H</i>, equal to <i>D E</i> and draw <i>F H</i>. -The angle <i>F</i> is equal to <i>A</i> -as required.</p> - -<p class="allclear"> </p> - -<div class="container rightfloat nomargin w12em" id="Fig111"> -<img src="images/illo089d.png" alt="Example" /> -<p class="caption">Fig. 111.</p> -</div> - -<p><span class="smcap">Ex.</span> 8.—<i>To bisect an angle</i>, -<a href="#Fig111">Fig. 111</a>. Let <i>A C B</i> be -the angle; on the center <i>C</i> -cut the sides at <i>A B</i>. On <i>A</i> -and <i>B</i> as centers describe arcs -cutting at <i>D</i> dividing the -angle into two equal parts.</p> - -<p class="allclear"> </p> - -<p class="allclear"><span class="pagenum" id="Page90">[90]</span></p> - -<div class="container leftfloat nomargin w15em" id="Fig112"> -<img src="images/illo090a.png" alt="Example" /> -<p class="caption">Fig. 112.</p> -</div> - -<p><span class="smcap">Ex.</span> 9.—<i>To find -the center of a circle -or of an arc of a circle.</i> -<a href="#Fig112">Fig. 112</a>. Draw -the chord <i>A B</i>, bisect -it by the perpendicular -<i>C D</i>, bounded -both ways by the circle; -and bisect <i>C D</i> -for the center <i>G</i>.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w12em" id="Fig113"> -<img src="images/illo090b.png" alt="Example" /> -<p class="caption">Fig. 113.</p> -</div> - -<div class="container rightfloat nomargin w12em" id="Fig114"> -<img src="images/illo090c.png" alt="Example" /> -<p class="caption">Fig. 114.</p> -</div> - -<p><span class="smcap">Ex.</span> 10.—<i>Through two -given points to describe an -arc of a circle with a given -radius</i>, <a href="#Fig113">Fig. 113</a>. On the -points <i>A</i> and <i>B</i> as centers, -with the given radius, describe -arcs cutting at <i>C</i>; and -from <i>C</i>, with the same radius, -describe an arc <i>A B</i> as required.</p> - -<p>Second, for a circle or -an arc, <a href="#Fig114">Fig. 114</a>. Select three -points <i>A</i>, <i>B</i>, <i>C</i> in the circumference, -well apart; with -the same radius describe -arcs from these three points -cutting each other, and draw -two lines <i>D E</i>, <i>F G</i>, through -their intersections according -to <a href="#Fig107">Fig. 107</a>. The point where -they cut is the center of the circle or arc.</p> - -<p><span class="smcap">Ex.</span> 11.—<i>To describe a circle passing through three -given points</i>, <a href="#Fig114">Fig. 114</a>. Let <i>A</i>, <i>B</i>, <i>C</i> be the given points -and proceed as in last problem to find the center <i>O</i>, -from which the circle may be described.</p> - -<p>This problem is variously useful; in finding the -diameter of a large fly-wheel, or any other object of -large diameter when only a part of the circumference -is accessible; in striking out arches when the span and -rise are given, etc.</p> - -<p class="allclear"> </p> - -<p><span class="pagenum" id="Page91">[91]</span></p> - -<div class="container rightfloat nomargin w20em" id="Fig115"> -<img src="images/illo091a.png" alt="Example" /> -<p class="caption">Fig. 115.</p> -</div> - -<p><span class="smcap">Ex.</span> 12.—<i>To draw a tangent to a circle from a given -point in the circumference</i>, <a href="#Fig115">Fig. 115</a>. From <i>A</i> set off -equal segments <i>A B</i>, -<i>A D</i>, join <i>B D</i> and -draw <i>A E</i>, parallel to -it, for the tangent.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w20em" id="Fig116"> -<img src="images/illo091b.png" alt="" /> -<p class="caption">Fig. 116.</p> -</div> - -<p><span class="smcap">Ex.</span> 13.—<i>To -draw tangents to a -circle from points -without it</i>, <a href="#Fig116">Fig. 116</a>. -From <i>A</i> with the -radius <i>A C</i> describe -an arc <i>B C D</i>, and -from <i>C</i> with a radius -equal to the diameter -of the circle, -cut the arc at <i>B D</i>, -join <i>B C</i>, <i>C D</i>, cutting -the circle at <i>E F</i>, and draw <i>A E</i>, <i>A F</i>, the tangents.</p> - -<p class="allclear"> </p> - -<div class="container rightfloat nomargin w20em" id="Fig117"> -<img src="images/illo091c.png" alt="Example" /> -<p class="caption">Fig. 117.</p> -</div> - -<p><span class="smcap">Ex.</span> 14.—<i>Between two inclined lines to draw a series -of circles touching these lines and touching each other</i>, -<a href="#Fig117">Fig. 117</a>. Bisect the inclination of the given lines <i>A B</i>, -<i>C D</i> by the line <i>N O</i>. From a point <i>P</i> in this line draw -the perpendicular <i>P B</i> to the line <i>A B</i>, and on <i>P</i> describe -the circle <i>B D</i>, touching the lines and cutting the -center lines at <i>E</i>. From <i>E</i> draw <i>E F</i> perpendicular to -the center line, cutting <i>A B</i> at <i>F</i>, and from <i>F</i> describe -an arc <i>E G</i>, cutting <i>A B</i> at <i>G</i>. Draw <i>G H</i> parallel to -<i>B P</i>, giving <i>H</i>, the center of the next circle, to be described -with the radius <i>H E</i>, and so on for the next -circle, <i>I N</i>.</p> - -<p class="allclear"> </p> - -<p><span class="pagenum" id="Page92">[92]</span></p> - -<div class="container leftfloat nomargin w10em" id="Fig118"> -<img src="images/illo092a.png" alt="Example" /> -<p class="caption">Fig. 118.</p> -</div> - -<div class="container rightfloat nomargin w12em" id="Fig119"> -<img src="images/illo092b.png" alt="Example" /> -<p class="caption">Fig. 119.</p> -</div> - -<p><span class="smcap">Ex.</span> 15.—<i>To construct a triangle -on a given base, the sides -being given.</i></p> - -<p>First. An equilateral triangle, -<a href="#Fig118">Fig. 118</a>. On the ends of a given -base <i>A B</i>, with <i>A B</i> as a radius -describe arcs cutting at <i>C</i>, and -draw <i>A C</i>, <i>C B</i>.</p> - -<p>Second. Triangle of unequal sides, <a href="#Fig119">Fig. 119</a>. On -either end of the base <i>A D</i>, with the side <i>B</i> as a radius -describe an arc; and with the side <i>C</i> as a radius, on -the other end of the base as a center, describe arcs cutting -the arc at <i>E</i>; join <i>A E</i>, -<i>D E</i>.</p> - -<p>This construction may be -used for finding the position -of a point <i>C</i> or <i>E</i> at given -distances from the ends of a -base, not necessarily to form -a triangle.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w12em" id="Fig120"> -<img src="images/illo092c.png" alt="Example" /> -<p class="caption">Fig. 120.</p> -</div> - -<div class="container rightfloat nomargin w10em" id="Fig121"> -<img src="images/illo092d.png" alt="Example" /> -<p class="caption">Fig. 121.</p> -</div> - -<p><span class="smcap">Ex.</span> 16.—<i>To construct a -square rectangle on a given -straight line.</i></p> - -<p>First. A square, <a href="#Fig120">Fig. -120</a>. On the ends <i>B A</i> as -centers, with the line <i>A B</i> -as radius, describe arcs cutting -at <i>C</i>; on <i>C</i> describe -arcs cutting the others at -<i>D E</i>; and on <i>D</i> and <i>E</i> cut these at <i>F G</i>. Draw -<i>A F</i>, <i>B G</i> and join the intersections <i>H I</i>.</p> - -<p>Second. A rectangle, <a href="#Fig121">Fig. -121</a>. On the base <i>E F</i> draw the -perpendiculars <i>E H</i>, <i>F G</i>, equal -to the height of the rectangle, -and join <i>G H</i>.</p> - -<p class="allclear"> </p> - -<p><span class="pagenum" id="Page93">[93]</span></p> - -<div class="container leftfloat nomargin w12em" id="Fig122"> -<img src="images/illo093a.png" alt="Example" /> -<p class="caption">Fig. 122.</p> -</div> - -<p><span class="smcap">Ex.</span> 17.—<i>To construct a -parallelogram of which the -sides and one of the angles -are given</i>, <a href="#Fig122">Fig. 122</a>. Draw -the side <i>D E</i> equal to the -given length <i>A</i>, and set off -the other side <i>D F</i> equal to -the other length <i>B</i>, forming -the given angle <i>C</i>. From <i>E</i> with <i>D F</i> as radius, -describe an arc, and from <i>F</i>, with the radius <i>D E</i> cut -the arc at <i>G</i>. Draw <i>F G</i>, <i>E G</i>. Or, the remaining -sides may be drawn as parallels to <i>D E</i>, <i>D F</i>.</p> - -<p class="allclear"> </p> - -<div class="container rightfloat nomargin w12em" id="Fig123"> -<img src="images/illo093b.png" alt="Example" /> -<p class="caption">Fig. 123.</p> -</div> - -<p><span class="smcap">Ex.</span> 18.—<i>To describe a -circle about a triangle</i>, <a href="#Fig123">Fig. -123</a>. Bisect two sides <i>A B</i>, -<i>A C</i> of the triangle at <i>E F</i>, -and from these points draw -perpendiculars cutting at <i>K</i>. -On the center <i>K</i>, with the -radius <i>K A</i> draw the circle -<i>A B C</i>.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w10em" id="Fig124"> -<img src="images/illo093c.png" alt="Example" /> -<p class="caption">Fig. 124.</p> -</div> - -<p><span class="smcap">Ex.</span> 19.—<i>To describe a circle about a square, and -to inscribe a square in a circle</i>, <a href="#Fig124">Fig. 124</a>.</p> - -<p>First. To describe the circle. -Draw the diagonals <i>A B</i>, <i>C D</i> of -the square, cutting at <i>E</i>; on the -center <i>E</i> with the radius <i>E A</i> -describe the circle.</p> - -<p>Second. To inscribe the square. Draw the two -diameters <i>A B</i>, <i>C D</i> at right angles and join the points -<i>A B</i>, <i>C D</i> to form the square.</p> - -<p><i>In the same way a circle may be described about a -triangle.</i></p> - -<p class="allclear"> </p> - -<p><span class="pagenum" id="Page94">[94]</span></p> - -<div class="container rightfloat nomargin w10em" id="Fig125"> -<img src="images/illo094a.png" alt="Example" /> -<p class="caption">Fig. 125.</p> -</div> - -<p><span class="smcap">Ex.</span> 20.—<i>To inscribe a circle on a square, and to -describe a square about a circle</i>, <a href="#Fig125">Fig. 125</a>.</p> - -<p>First. To inscribe the circle. Draw the diagonals -<i>A B</i>, <i>C D</i> of the square, cutting at <i>E</i>; draw the perpendicular -<i>E F</i> to one side, and with the radius <i>E F</i> -describe the circle.</p> - -<p>Second. To describe the square. Draw two diameters -<i>A B</i>, <i>C D</i> at right angles, and produce them; -bisect the angle <i>D E B</i> at the center by the diameter -<i>F G</i>, and through <i>F</i> and <i>G</i> draw perpendiculars <i>A C</i>, -<i>B D</i>, and join the points <i>A D</i> and <i>B C</i> where they -cut the diagonals to complete the square.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w15em" id="Fig126"> -<img src="images/illo094b.png" alt="Example" /> -<p class="caption">Fig. 126.</p> -</div> - -<p><span class="smcap">Ex.</span> 21.—<i>To inscribe -a circle in a -triangle</i>, <a href="#Fig126">Fig. 126</a>. -Bisect two of the -angles <i>A C</i> of the -triangle by lines -cutting at <i>D</i>; from -<i>D</i> draw a perpendicular <i>D E</i> to any side, and with -<i>D E</i> as radius describe a circle.</p> - -<p class="allclear"> </p> - -<div class="container rightfloat nomargin w12em" id="Fig127"> -<img src="images/illo094c.png" alt="Example" /> -<p class="caption">Fig. 127.</p> -</div> - -<p><span class="smcap">Ex.</span> 22.—<i>To inscribe a pentagon in a circle</i>, <a href="#Fig127">Fig. 127</a>. -Draw two diameters <i>A C</i>, -<i>B D</i> at right angles cutting -at <i>O</i>; bisect <i>A O</i> at -<i>E</i>, and from <i>B</i> with radius -<i>B E</i> cut the circumference -at <i>G H</i> and with the same -radius step round the circle -to <i>I</i> and <i>K</i>; join the points -to form the pentagon.</p> - -<p class="allclear"> </p> - -<p><span class="pagenum" id="Page95">[95]</span></p> - -<div class="container leftfloat nomargin w15em" id="Fig128"> -<img src="images/illo095a.png" alt="Example" /> -<p class="caption">Fig. 128.</p> -</div> - -<p><span class="smcap">Ex.</span> 23.—<i>To construct -a hexagon upon a given -straight line</i>, <a href="#Fig128">Fig. 128</a>. -From <i>A</i> and <i>B</i>, the ends -of the given line, describe -arcs cutting at <i>G</i>; from <i>G</i> -with the radius <i>G A</i> describe -a circle. With the -same radius set off the -arcs <i>A C</i>, <i>C F</i> and <i>B D</i>, -<i>D E</i>; join the points so found to form the hexagon.</p> - -<p class="allclear"> </p> - -<div class="container rightfloat nomargin w15em" id="Fig129"> -<img src="images/illo095b.png" alt="Example" /> -<p class="caption">Fig. 129.</p> -</div> - -<p><span class="smcap">Ex.</span> 24.—<i>To inscribe a hexagon in a circle</i>, <a href="#Fig129">Fig. 129</a>. -Draw a diameter <i>A C B</i>; -from <i>A</i> and <i>B</i> as centers, -with the radius of the circle -<i>A C</i> cut the circumference -at <i>D</i>, <i>E</i>, <i>F</i>, <i>G</i>, and -draw <i>A D</i>, <i>D E</i>, etc., to -form the hexagon. The -points <i>D E</i>, etc., may be -found by stepping the -radius (with the dividers) -six times round the circle.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w15em" id="Fig130"> -<img src="images/illo095c.png" alt="Example" /> -<p class="caption">Fig. 130.</p> -</div> - -<p><span class="smcap">Ex.</span> 25.—<i>To describe an -octagon on a given straight -line</i>, <a href="#Fig130">Fig. 130</a>. Produce the -given line <i>A B</i> both ways -and draw perpendiculars -<i>A E</i>, <i>B F</i>; bisect the external -angles <i>A</i> and <i>B</i> by -the lines <i>A H</i>, <i>B C</i>, which -make equal to <i>A B</i>. Draw -<i>C D</i> and <i>H G</i> parallel to -<i>A E</i> and equal to <i>A B</i>; -from the center <i>G D</i>, with the radius <i>A B</i>, cut the perpendiculars -at <i>E F</i>, and draw <i>E F</i> to complete the hexagon.</p> - -<p class="allclear"> </p> - -<div class="container rightfloat nomargin w15em" id="Fig131"> -<img src="images/illo095d.png" alt="Example" /> -<p class="caption">Fig. 131.</p> -</div> - -<p><span class="smcap">Ex.</span> 26.—<i>To convert a -square into an octagon</i>, <a href="#Fig131">Fig. -131</a>.—Draw the diagonals -of the square cutting at <i>E</i>; -from the corners <i>A</i>, <i>B</i>, <i>C</i>, <i>D</i>, -with <i>A E</i> as radius, describe -arcs cutting the -sides at <i>G</i>, <i>H</i>, etc., and -join the points so found -to complete the octagon.</p> - -<p class="allclear"> </p> - -<p><span class="pagenum" id="Page96">[96]</span></p> - -<div class="container rightfloat nomargin w12em" id="Fig132"> -<img src="images/illo096a.png" alt="Example" /> -<p class="caption">Fig. 132.</p> -</div> - -<p><span class="smcap">Ex.</span> 27.—<i>To inscribe -an octagon in a circle</i>, <a href="#Fig132">Fig. -132</a>. Draw two diameters -<i>A C</i>, <i>B D</i>, at right angles; -bisect the arcs <i>A B</i>, <i>B C</i>, -at <i>E</i>, <i>F</i>, etc., to form the -octagon.</p> - -<p class="allclear"> </p> - -<div class="container leftfloat nomargin w12em" id="Fig133"> -<img src="images/illo096b.png" alt="Example" /> -<p class="caption">Fig. 133.</p> -</div> - -<p><span class="smcap">Ex.</span> 28.—<i>To describe -an octagon about a circle</i>, <a href="#Fig133">Fig. 133</a>. Describe a square -about the given circle <i>A B</i>, -draw perpendiculars <i>H</i> -and <i>K</i>, to the diagonals, -touching the circle to form -the octagon. Or, the points -<i>H</i>, <i>K</i>, etc., may be found -by cutting the sides from -the corners, by lines parallel -to the diagonals.</p> - -<p class="allclear"> </p> - -<div class="container rightfloat nomargin w20em" id="Fig134"> -<img src="images/illo096c.png" alt="Example" /> -<p class="caption">Fig. 134.</p> -</div> - -<p id="Ref2"><span class="smcap">Ex.</span> 29.—<i>To describe an ellipse when the length and -breadth are given</i>, <a href="#Fig134">Fig. 134</a>. On the center <i>C</i>, with <i>A E</i> -as radius, cut the axis <i>A B</i> at <i>F</i> and <i>G</i>, the foci, fix -a couple of pins into the axis at <i>F</i> and <i>G</i>, and loop on a -thread or cord -upon them -equal in length -to the axis <i>A B</i>, -so as when -stretched to -reach the extremity -<i>C</i> of -the conjugate -axis, as shown -in dot-lining. -Place a pencil -or drawpoint -inside the cord, as at <i>H</i>, and guiding the pencil in this -way, keeping the cord equally in tension, carry the -pencil round the pins <i>F</i>, <i>G</i>, and so describe the ellipse.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—The ellipse is an oval figure, like a circle in perspective. -The line that divides it equally in the direction of its -great length is the <i>transverse axis</i>, and the line which divides the -opposite way is the <i>conjugate axis</i>.</p> - -</div> - -<p><span class="pagenum" id="Page97">[97]</span></p> - -<p><i>Second Method.</i> Along the straight edge of a -piece of stiff paper mark off a distance <i>a c</i> equal to -<i>A C</i>, half the transverse axis; and from the same point -a distance <i>a b</i> equal to <i>C D</i>, half the conjugate axis. -Place the slip so as to bring the point <i>b</i> on the line <i>A B</i> -of the transverse axis, and the point <i>c</i> on the line -<i>D E</i>; and set off on the drawing the position of -the point <i>a</i>. Shifting the slip, so that the point -travels on the transverse axis, and the point <i>c</i> on -the conjugate axis, any number of points in the curve -may be found, through which the curve may be traced. -See <a href="#Fig135">fig. 135</a>.</p> - -<p class="allclear"> </p> - -<div class="container w25em" id="Fig135"> -<img src="images/illo097.png" alt="Example" /> -<p class="caption">Fig. 135.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page98">[98]</span></p> - -<h2 class="nobreak">Trigonometry.</h2> - -</div><!--chapter--> - -<p>Trigonometry is that portion of geometry which -has for its object the measurement of triangles. When -it treats of plane triangles, it is called <i>Plane Trigonometry</i>; -and as the engineer will continually meet -in his studies of higher mathematics <i>the terms</i> used -in plane trigonometry, it is advantageous for him -to become familiar with some of the principles and -definitions relating to this branch of mathematics.</p> - -<p>The circumferences of all circles contain the same -number of degrees, but the greater the radius the -greater is the absolute measures of a degree. The -circumference of a fly wheel or the circumference of -the earth have the same number of degrees; yet the -same number of degrees in each and every circumference -is the measure of precisely the same angle.</p> - -<p>The circumference of a circle is supposed to be -divided into 360 degrees or divisions, and as the total -angularity about the center is equal to four right -angles, each right angle contains 90 degrees, or 90°, -and half a right angle contains 45°. Each degree is -divided into 60 minutes, or 60′; and for the sake of still -further minuteness of measurement, each minute is -divided into 60″. In a whole circle there are, therefore, -360 × 60 × 60 = 1,296,000 seconds. The annexed diagram, -<a href="#Fig136">fig. 136</a>, exemplifies the relative positions of the</p> - -<div class="diagonalp"> - -<p>Sine,<br /> -<span class="padl2">Co-sine,</span><br /> -<span class="padl4">Versed Sine,</span></p> - -</div><!--diagonalp--> - -<div class="diagonalp"> - -<p>Tangent,<br /> -<span class="padl2">Co-Tangent,</span><br /> -<span class="padl4">Secant and</span><br /> -<span class="padl6">Co-secant</span></p> - -</div><!--diagonalp--> - -<p class="noindent">of an angle.</p> - -<div class="container w30em" id="Fig136"> -<img src="images/illo099.png" alt="" /> -<p class="caption">Fig. 136.</p> -</div> - -<p>These may be defined thus:</p> - -<p><span class="pagenum" id="Page99">[99]</span></p> - -<h3>DEFINITIONS.</h3> - -<p>1. The <i>Complement</i> of an arc is 90° minus the arc.</p> - -<p>2. The <i>Supplement</i> of an arc is 180° minus the arc.</p> - -<p>3. The <i>Sine</i> of an angle, or of an arc, is a line -drawn from one end of an arc, perpendicular to a diameter -drawn through the other end.</p> - -<p>4. The <i>Cosine</i> of an arc is the perpendicular distance -from the center of the circle to the sine of the -arc; or, it is the same in magnitude as the sine of the -complement of the arc.</p> - -<p>5. The <i>Tangent</i> of an arc is a line touching the -circle in one extremity of the arc, and continued from -thence, to meet a line drawn through the center and -the other extremity.</p> - -<p>6. The <i>Cotangent</i> of an arc is the tangent of the -complement of the arc. The <i>Co</i> is but a contraction of -the word complement.</p> - -<p>7. The <i>Secant</i> of an arc is a line drawn from the -center of the circle to the extremity of the tangent.</p> - -<p>8. The <i>Cosecant</i> of an arc is the secant of the -complement.</p> - -<p>9. The <i>Versed Sine</i> of an arc is the distance from -the extremity of the arc to the foot of the sine.</p> - -<p>For the sake of brevity, these technical terms are -contracted thus: for sine <i>A B</i>, we write <i>sin. A B</i>; for -cosine <i>A B</i>, we write <i>cos. A B</i>; for tangent <i>A B</i>, we -write <i>tan. A B</i>, etc.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page100">[100-<br />101]</span><a id="Page101"></a></p> - -<div class="container w30em"> -<img src="images/illo101.png" alt="INSTRUMENTS AND MATERIALS" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page102">[102]</span></p> - -<div class="container w40em" id="Fig137"> -<img src="images/illo102.png" alt="Drawing board" /> -<p class="caption">Fig. 137.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page103">[103]</span></p> - -<h2 class="nobreak">Drawing Materials and Instruments.</h2> - -</div><!--chapter--> - -<p>Drawing tools or instruments are contrived solely -for mechanical drawing; aside from this use they are -perfectly worthless, hence the quality of these special -utensils is a matter of the first consideration to the earnest -student.</p> - -<p>There are several degrees of excellence to be found -in the make-up of drawing instruments and materials; -it may be remarked with truth that “any kind are good -enough, and the best none too good,” i. e., a learner in -this delightful art should not stop at the lack of goodness -or the low grade existing in his “tools,” but -rather do the best work possible with the means at -hand.</p> - -<p>However, in order that acceptable work may be -accomplished, fairly good instruments should be procured. -The advice of some one experienced in the use -and care of draughting tools should be sought before -purchasing. A drawing board, a single sheet of paper -and a pencil is the simplest “outfit” to be thought of; -to this small beginning may be added, soon afterwards, -an inexpensive pair of compasses, a T-square and a -couple of triangles; a vast range of work can be executed -with these few tools.</p> - -<p>Nothing else will be needed to do fine work -except, perhaps, one or two pairs of better compasses -and a few sweeps or means of drawing irregular -curves; all these had best be purchased separately; for -in buying a “box of instruments,” it may contain some -articles which are not desired, or that are of a wrong -size, or even duplicates of those already possessed.</p> - -<div class="container leftfloat w20em" id="Fig138"> -<img src="images/illo104.jpg" alt="Drawing table" /> -<p class="caption">Fig. 138.</p> -</div> - -<p><span class="pagenum" id="Page104">[104]</span></p> - -<p>An outfit recommended by the author of “Reed’s -Hand Book” is as follows.</p> - -<p>Large compasses with -movable leg.</p> - -<p>A pair of dividers.</p> - -<p>Bow pencil.</p> - -<p>Bow pen.</p> - -<p>Pencil leg for large compasses.</p> - -<p>Pen leg for large compasses.</p> - -<p>Drawing pen.</p> - -<p>Louis Rouillon, B. S., Instructor of Drawing in -Pratt Institute, New York, recommends the following:</p> - -<p>Compasses, 5<sup>1</sup>⁄<sub>2</sub> inches, with needle point; pen -pencil and lengthening bar.</p> - -<p>Drawing pen, 4<sup>1</sup>⁄<sub>2</sub> inches.</p> - -<p>T-square, 24-inch blade.</p> - -<p>45-degree triangle, 9 inches.</p> - -<p>30 and 60 degree triangle, 9 inches.</p> - -<p>1 Scroll.</p> - -<p>Dixon’s V. H. pencil.</p> - -<p>12-inch boxwood scale, flat, graduated <sup>1</sup>⁄<sub>16</sub> inch -the entire length.</p> - -<p>Bottle of liquid India ink, four thumb-tacks, pen -and ink eraser.</p> - -<p>20 sheets drawing paper, 11 × 15 inches, and a -drawing-board about 16 × 23 inches will also be necessary; -students can usually make the board themselves -for less money than it can be bought.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—The purchasing of drawing tools is one of the most -difficult points to settle that can present itself to a person about to -buy a drawing outfit for the first time. Nothing can be so productive -of distress to a person drawing as to have his tools getting out -of order, joints one day too tight, next day too slack, points getting -blunt or perhaps turning up altogether; if needle points, then -the needles slip up, and drawing spoiled; in fact, the purchaser -can be annoyed in numberless different ways.—<span class="smcap">W. H. Thorn.</span></p> - -</div><!--note--> - -<p><span class="pagenum" id="Page105">[105]</span></p> - -<div class="container" id="Fig139"> -<img src="images/illo105.jpg" alt="Drawing set" /> -<p class="caption">Fig. 139.</p> -</div> - -<p><span class="pagenum" id="Page106">[106]</span></p> - -<div class="container" id="Fig140"> -<img src="images/illo106.png" alt="Drawing board" /> -<p class="caption">Fig. 140.</p> -</div> - -<p><span class="pagenum" id="Page107">[107]</span></p> - -<h3>THE DRAWING BOARD.</h3> - -<p>A drawing-board should be made of well seasoned -pine of a convenient size, say 23 × 16, which will take -half a sheet of imperial paper, leaving <sup>1</sup>⁄<sub>2</sub>-inch margin -all around.</p> - -<p>The working surface of the board—or its front -side—should be perfectly smooth, but instead of being -flat it should have a very slight camber, or rounding, -breadthways, this latter feature in its construction -being to prevent the possibility of a sheet of paper -when stretched on its surface having any vacuity -beneath it.</p> - -<p>The <i>four edges</i> of the board need not form an -exact rectangle, as much valuable time is often wasted -in the attempts to produce such a board; but it will -answer every purpose of the draughtsman so long as -the adjacent edges at the lower left-hand corner of it -are at right angles, or square to each other.</p> - -<p>An English authority recommends the use of two -drawing-boards, 42 inches long and 30 inches wide, -made of plain stuff, without cleets, 1<sup>1</sup>⁄<sub>4</sub> inches thick—seasoned—with -edges perfectly straight and at right -angles to each other. <i>With two boards, one may be -used for sketching and drawing details and the other for -the finished drawing.</i></p> - -<p>The board should be <sup>3</sup>⁄<sub>4</sub> inch in thickness, and -fitted at the back, at right angles to its longest side, -with a couple of hardwood battens, about 2 inches wide -and <sup>3</sup>⁄<sub>4</sub> inch thick; the use of these battens being to -keep the board from casting or winding and to allow -of its expansion or contraction through changes of -temperature. This latter purpose, however, is only -effected by attaching the battens to the back of the -board in the following manner: ... At the middle -of the length of each batten—which should be one -inch less than the width of the board—a stout, well-fitted -wood screw is firmly inserted into it, and made to -penetrate the board for about <sup>1</sup>⁄<sub>2</sub> inch, the head of the -screw being made flush with the surface of the batten; -on either side of the central screw, two others, about -3<sup>1</sup>⁄<sub>2</sub> inches apart, are passed through oblong holes in -the battens, and screwed into the body of the board -until their heads are flush with the central one; fitted -in this way the board itself can expand or contract -lengthwise or crosswise, while its surface is prevented -from warping or bending.</p> - -<p><span class="pagenum" id="Page108">[108]</span></p> - -<div class="container" id="Fig141"> -<img src="images/illo108.png" alt="Drawing board" /> -<p class="caption">Fig. 141.</p> -</div> - -<p><span class="pagenum" id="Page109">[109]</span></p> - -<p>A further improvement in such a drawing board -as above shown is made by cutting lengthwise along its -ends a narrow groove and inserting an ebony or hardwood -strip; this is cut or sawn apart at about every -inch to admit of contraction; this strip serves as a guide -to the stock of the drawing square, allowing an easy -sliding movement.</p> - -<p>To produce really good work in the shape of a -mechanical drawing, one perfect straight edge only is -required on a drawing board, and that the left one, -which is always known as the <i>working-edge</i>; but for -the convenience of being able to draw a long line across -the board at right angles to its lower edge, this edge is -made truly square with that on the left side of the -board.</p> - -<p>The details for building these drawing boards are -given, because they are easy to be made by one who -understands the use of a few wood-working tools; while -the boards themselves are difficult of transportation—in -case of the change of residence of their owners—quite -unlike the instruments which are to accompany -them.</p> - -<p><a href="#Fig141">Fig. 141</a> represents the board which has been described -in the text, with provisions for the contraction -and expansion; the very dark lines are intended to -represent the ebony insertions—as described. <a href="#Fig140">Fig. 140</a> -represents a plain pine board with dovetailed battens.</p> - -<p><span class="pagenum" id="Page110">[110]</span></p> - -<div class="container w30em" id="Fig142"> -<img src="images/illo109.jpg" alt="Thumb-tacks" /> -<p class="caption">Fig. 142.</p> -</div> - -<p><a href="#Fig142">Fig. 142</a> represents the common means used to attach -or secure slightly or temporarily the drawing paper -to the drawing board; these are called thumb-tacks, -and are usually forced through the paper into the wood -by the hand, whence they are easily detached. These -are made to have as slight a projection as may be, so as -not to interfere with the free movement of the tee-square.</p> - -<p>For mechanical drawing the invariable practice is -to secure the paper on which the drawing is to be made -to the drawing board by pinning it; this is effected by -various kinds of <i>drawing pins</i> or <i>thumb-tacks</i>.</p> - -<p>The best kind for this purpose have a head as -thin as possible without cutting at its edges, slightly -concave on the under side next the paper, and only so -much convex on its upper side as will give it sufficient -thickness to enable the pin to be secured to it; better -use four or more small pins along the edge of a sheet -of paper, than use one clumsy, badly made pin at each -end.</p> - -<div class="container" id="Fig143144"> - -<img src="images/illo110.jpg" alt="Trestles" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 143.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 144.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<p><a href="#Fig143144">Fig. 143 and fig. 144</a> represent a pair of plain -trestles or horses in common use for supporting large -size drawing boards. This pattern is found frequently -in the laying-out shop. <a href="#Fig145146">Fig. 145 and fig. 146</a> represent<span class="pagenum" id="Page111">[111]</span> -<i>adjustable</i> horses or trestles—these are designed, -primarily, for office use. As will be seen by viewing the -illustration, the upper part is supported by two hard-wood -sliding pieces; these are provided with strong -pins and numerous holes, and pass through the frame -of the trestle, as shown, so that the upper portions can -be arranged at any angle convenient to the draughtsman, -as he lies over his work or stands by it.</p> - -<div class="container" id="Fig145146"> - -<img src="images/illo111a.jpg" alt="Trestles" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 145.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 146.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<p><a href="#Fig137">Fig. 137</a> is introduced to exhibit the paper attached -to the drawing board with the thumb-tacks, and with -the T-square and set-squares arranged to commence -work; the paper should not extend to the edges of the -board; three, four or more tacks may be used on -each edge of the sheet of paper, instead of two, as shown -in illustration.</p> - -<div class="container w30em" id="Fig147"> -<img src="images/illo111b.jpg" alt="Drawing" /> -<p class="caption">Fig. 147.</p> -</div> - -<p>A most convenient—and except for its extreme -lightness, which is not good in a drawing stand—a -most admirable device is shown in <a href="#Fig138">fig. 138</a>. The drawing -table is simply a drawing board with folding legs; -these are made from hard-wood, while the top is made<span class="pagenum" id="Page112">[112]</span> -of soft, seasoned pine, with square corners; while the -device is strong and well braced, it can be folded and -easily carried about—all as shown in the illustration.</p> - -<div class="container" id="Fig148"> -<img src="images/illo112a.jpg" alt="T-square" /> -<p class="caption">Fig. 148.</p> -</div> - -<h3>THE TEE-SQUARE.</h3> - -<p>This is an instrument in the form of a letter T, as -shown in the <a href="#Fig149150">figures 149 and 150</a>; the two parts are -known as <i>stock</i> and <i>blade</i>; the horizontal part of the -letter (T) is the stock, and the vertical part the blade—hence -the name, T-square; to form the square, -the two parts are joined together in such a way as to -make them exactly at right angles to each other; the -stock, which is applied to the working edge of the -drawing board, being about one-third the length of the -blade, and about three times its thickness.</p> - -<div class="container" id="Fig149150"> -<img src="images/illo112b.jpg" alt="T-squares" /> -<p class="caption">Figs. 149 and 150.</p> -</div> - -<p>To be perfect in construction, a tee-square should -be as light as is consistent with its necessary strength -and stiffness of parts; it should be made of suitable -material easily manufactured, put together, and repaired, -and withal as truly correct as is possible to be -made. Such a square is represented in <a href="#Fig148">fig. 148</a>; it -has a taper blade, which is generally about double -the width where secured to the stock as it is at the -end.</p> - -<p><span class="pagenum" id="Page113">[113]</span></p> - -<div class="container leftfloat w20em" id="Fig151152"> -<img src="images/illo113.png" alt="T-square" /> -<p class="caption">Figs. 151 and 152.</p> -</div> - -<p>The manner in which the stock is united to the -blade determines its adaptability or otherwise to the -use made of it; in some the stock is rectangular in section, -and the blade mortised into it; in others the -blade is dovetailed and let into the stock for the whole -of its thickness.</p> - -<h3>ADJUSTABLE BLADED SQUARE.</h3> - -<p>In cases where many parallel lines have to be -drawn, of lengths beyond the capabilities of ordinary -set-squares, and in directions other than square with or -parallel to the working edge of the drawing board it is -convenient to have for use an <i>adjustable</i> bladed tee-square, -or one whose blade can be set at any desired -angle. The blade of such a square should be tapered -as in illustration, but shaped at its wide end as shown, -and having a stock wide enough to allow for the surface -required in the washers of the fittings necessary to -make the blade adjustable. These fittings, though requiring -to be well made and neatly finished, are not -expensive or difficult to make, as they consist merely -of two washers, a square-necked bolt, and a fly nut.</p> - -<p>The tee-square, as -shown, has four parts: 1, -blade; 2, fixed head; 3, -shifting head; 4, swivel. -The head is held firmly -by the left hand to the left -edge of the drawing board, -and the blade serves as a -straight-edge for horizontal -lines that may extend -the whole length of the -paper. It can be used for -either horizontal, or, by -reversing to the bottom of -the board, for vertical -lines; and, by turning it -over, so that the shifting -head is against the edge of the drawing board instead<span class="pagenum" id="Page114">[114]</span> -of the fixed head, lines at different angles may -be drawn. The length of the blade should be the length -of the drawing board; if it is shorter, inconvenience will -be experienced when lines the whole length of the -board are wanted.</p> - -<h3>TRIANGLES, OR SET-SQUARES.</h3> - -<p>Set-squares are invariably used in connection with -the tee-square, as shown in <a href="#Fig148">fig. 148</a>. The illustrations -below show several patterns of the device; by these, -vertical lines, triangles, squares and hexagonal, octagonal -and twelve-sided figures, diagonal section lines, -etc., can be easily drawn. For ordinary purposes, a -triangle or set-square with angles of 45° may be 4 -inches long and the other 8 inches in length, but a -six-inch set-square having angles 90°, 45° and 45°, -and an eight-inch one having angles of 90°, 60° and -30°, will be found sufficient for all purposes; there are -other triangles used specially for making letters.</p> - -<div class="container" id="Fig153156"> - -<img src="images/illo114a.jpg" alt="Triangles" /> - -<p class="caption">Fig. 153.—Fig. 154.—Fig. 155.—Fig. 156.</p> - -</div><!--container--> - -<p>In practice the triangles or set-squares are slid -along the edge of the blade, and need not be any -thicker than it.</p> - -<h3>PARALLEL RULE.</h3> - -<div class="container w40em" id="Fig157"> -<img src="images/illo114b.jpg" alt="Parallel rule" /> -<p class="caption">Fig. 157.</p> -</div> - -<p>This instrument is used to mark lines which are -neither horizontal nor vertical (usually these are drawn -by the square and set-square), and which are parallel -to one another; by adjusting the edge of the parallel -ruler to a line, it can be extended or opened out (or<span class="pagenum" id="Page115">[115]</span> -vice-versa closed), and the line or lines drawn will be -parallel or equally distant from the base or first line it -was set by. See <a href="#Fig157">fig. 157</a>.</p> - -<p><a href="#Fig158">Fig. 158</a> is a parallel ruler, constructed with two -rollers fixed on a rod so that they move the same -distance, carrying the ruler parallel to the starting line.</p> - -<div class="container" id="Fig158"> -<img src="images/illo115.jpg" alt="Rule" /> -<p class="caption">Fig. 158.</p> -</div> - -<div class="note"> - -<p><span class="smcap">Note.</span>—It has been said that “a workman may be known by his tools,” but the statement must be taken with a good deal of allowance. -Some workmen may possess a very fine set of tools and never use them, because they have not the ability or inclination to learn -how; especially is this the case with drawing instruments.</p> - -<p>If all the fine sets of drawing instruments that are owned by workmen were put to frequent use the owners would find a marked improvement -in their abilities in other lines as well as drawing; for it is a noticeable fact that when a person’s mind has been trained in a -business that requires close calculation and a knowledge of materials, he is capable of showing good qualifications in other lines, and the -more skilled he is in one the easier can he acquire skillfulness in another, if he applies the same amount of energy, thought and interest -as he did to acquire skill in the first.</p> - -</div><!--note--> - -<p><span class="pagenum" id="Page116">[116]</span></p> - -<h3>SECTION LINER.</h3> - -<p><a href="#Fig159">Fig. 159</a> shows an improved section liner which can -be adjusted to any angle, and will space the parallel -lines at any desired regular distance.</p> - -<div class="container" id="Fig159"> -<img src="images/illo116.png" alt="Section liner" /> -<p class="caption">Fig. 159.</p> -</div> - -<p><span class="pagenum" id="Page117">[117]</span></p> - -<h3>IRREGULAR CURVE OR SCROLL.</h3> - -<p>Irregular curves, or, as they are sometimes termed, -sweeps, represented by <a href="#Fig160166">figs. 160-166</a>, are used for curves -that cannot be put in by the other instruments. They -are very useful when elliptical or parabolic curves are -desired, in preference to circles or arcs of a circle. -They are much used in design and architectural drawing. -They are made of thin hardwood or rubber, and -sometimes of horn.</p> - -<div class="container" id="Fig160166"> -<img src="images/illo117.png" alt="Curves" /> -<p class="caption">Figs. 160-166.</p> -</div> - -<p><span class="pagenum" id="Page118">[118]</span></p> - -<div class="container rightfloat w10em" id="Fig167168"> - -<img src="images/illo118.jpg" alt="Pencils" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 167.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 168.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<p>Curves are irregular lines; a circle is a regular line. -If a curve is to be passed through a number of predetermined -points it should be first sketched in lightly, -free-hand; a section of the scroll is then applied to the -curve so as to embrace as many points as possible; -only the central points of those thus embraced should -be inked in; this process is continued until the desired -curve is completed.</p> - -<p>Curves are made of various material, pearwood, -cardboard, xylonite, hard rubber, and a strip of soft -lead is sometimes used, which may be easily adjusted -to the curve required.</p> - -<p>The curves generally used in mechanical drawing -are shown on <a href="#Page117">previous page</a>.</p> - -<p><a href="#Fig208">Fig. 208</a>, <a href="#Page134">page 134</a>, is a logarithmic <i>spiral</i> curve. -It is mathematically constructed and contains every -curve within the limit of its size.</p> - -<h3>ELLIPSES.</h3> - -<p>An ellipse is a geometrical figure, and can be -drawn as described in <a href="#Ref2">geometrical problem 29</a>, <a href="#Page96">page -96</a>; many drawing offices keep sets of hard rubber -ellipses, to economize time constructing them.</p> - -<div class="container leftfloat w10em" id="Fig169170"> - -<img src="images/illo119.jpg" alt="Compasses" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 169.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 170.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<h3>DRAWING PENCILS.</h3> - -<p>These are instruments for marking, drawing or -writing, formed of graphite, colored chalk or materials -of similar properties, and having a tapering end, -inclosed, generally, in a cylinder of -softwood. <a href="#Fig167168">Fig. 167</a> represents a -ruling pencil; its point is a parallelogram -or of a wedge shape. In -ruling, the length view rests against -the square; its shape gives considerable -strength to the lead and -allows the making of a very fine -line. <a href="#Fig167168">Fig. 168</a> differs in the point -of the pencil shown, as may be -observed in the illustration.</p> - -<p>A pencil that is hard is best -for mechanical drawing; one that -will retain a good point for some<span class="pagenum" id="Page119">[119]</span> -considerable time. Pencil lines -should be made as light as possible; -the presence of lead on the surface -of the paper tends to prevent -the ink passing to the paper, and -in rubbing out pencil lines the ink -is reduced in blackness, and the -surface of paper is roughened, -which is a disadvantage. As little -erasing or rubbing out as possible -should be done.</p> - -<h3>DIVIDERS AND COMPASSES.</h3> - -<p>These instruments, while they -appear alike, have a separate use: -the dividers are used to space off -distances and dimensions; especially -are they necessary in reading -drawings made to scale. <i>Compasses</i> -are used for describing circles, curves, etc., <i>dividers</i> -are used for marking out spaces.</p> - -<p>Two forms of the dividers are shown in <a href="#Fig169170">figs. 169 -and 170</a>; the simplest, plainest form is shown in <a href="#Fig169170">fig. -169</a>; these are used for rough spacings; <a href="#Fig169170">fig. 170</a> represents -a pair of dividers fitted with an adjustable screw -controlled by a steel spring in one leg; by this a very -exact measurement can be made. <a href="#Fig169170">Fig. 170</a> is intended -to exhibit what is called a “hair-spring divider.”</p> - -<h3>PROPORTIONAL DIVIDERS.</h3> - -<p>These dividers differ from the ordinary ones -shown in <a href="#Fig169170">figs. 169 and 170</a> in that they are provided -with four steel points, one pair of which being set to -the full dimension will be reproduced by the other -pair, but in a smaller, or reduced size.</p> - -<p><a href="#Fig171174">Fig. 171</a> are “bisecting” dividers, being proportional -dividers, which, when open, one end measures -double the distance of the other.</p> - -<p><a href="#Fig171174">Fig. 172</a> are proportional dividers; the points at -one end are capable of being changed, -to measure practically any desired -proportion at the other end, by -altering the position of the pivot -where the legs cross one another. -The lower connecting link is a -micrometer adjustment, for minute -measurements.</p> - -<p><a href="#Fig171174">Fig. 173</a> are proportional dividers -which are marked for the proportions -of lines and radii of circles, being -provided with a rack movement for -adjustment.</p> - -<p><a href="#Fig171174">Fig. 174</a> represents three-leg dividers, -used for taking the position of -three points; this instrument is very -useful in finding the position of a point in a -figure.</p> - -<p><span class="pagenum" id="Page120">[120]</span></p> - -<div class="container" id="Fig171174"> - -<img src="images/illo120.jpg" alt="Dividers" /> - -<p class="caption">Fig. 171.—Fig. 172.—Fig. 173.—Fig. 174.</p> - -</div><!--container--> - -<p><span class="pagenum" id="Page121">[121]</span></p> - -<div class="container w20em" id="Fig175179"> - -<img src="images/illo121.jpg" alt="Compasses" /> - -<p class="caption">Fig. 175.—Fig. 176.—Fig. 177.—Fig. 178.—Fig. 179.</p> - -</div><!--container--> - -<h3>COMPASSES.</h3> - -<p>Compasses consist of two -pointed legs; they are instruments -for describing circles or for—sometimes—measuring -figures, in -absence of dividers. <a href="#Fig175179">Fig. 175</a> -represents compasses fitted as -dividers.</p> - -<p>Compasses should have jointed -legs, which will allow the points -to be placed at right angles to the -paper, whatever the size of the -circle to be drawn. Compasses -should not be used for circles -which are too large to allow the points to be thus -placed; a lengthening bar is generally provided, which -greatly increases the diameters of circles which may be -drawn by this attachment; it is shown in <a href="#Fig175179">fig. 176</a>.</p> - -<p>One leg of the compasses is usually provided with -a socket to which are fitted three points: a divider -point, <a href="#Fig175179">fig. 179</a>; a pencil point, <a href="#Fig175179">fig. 177</a>; -and a point,<span class="pagenum" id="Page122">[122]</span> -<a href="#Fig175179">fig. 178</a>, carrying a special pen for the inking of circles. -Each of these points is generally provided with a joint, -so that it may be placed at right angles to the paper.</p> - -<p>The other leg should be jointed; it is often provided -with a socket which receives -two points, one a divider point, and -the other carrying a needle point. -Such an instrument may be used as -dividers for spacing, or as compasses -for penciling or inking circles.</p> - -<p>The joint at the head of the -compasses (see <a href="#Fig175179">fig. 175</a>) is the most -important feature. It should hold the -legs firmly in any position, so that in -going over a circle several times only -one line will result. It should allow -the legs to move smoothly and evenly, -and should be capable of adjustment.</p> - -<div class="container w40em" id="Fig180184"> - -<img src="images/illo122.jpg" alt="Compasses" /> - -<p class="caption">Fig. 180.—Fig. 181.—Fig. 182.—Fig. 183.—Fig. 184.</p> - -</div><!--container--> - -<p>As shown in <a href="#Fig171174">fig. 174</a>, one leg has -a hinge or joint, and a needle point,<span class="pagenum" id="Page123">[123]</span> -which can be regulated by a thumb screw; the other -leg has a socket or recess into which interchangeable -parts can be inserted. The four figures to the right of -the compasses show the parts which are provided with -shanks or insertion pieces. <a href="#Fig180184">Fig. 180</a> and <a href="#Fig180184">fig. 181</a> represent -compasses specially used for making small circles, -and work too minute for the larger instruments described -above.</p> - -<p>To do work of this nature easily a pair of spring -dividers are frequently used. This instrument has one -point attached to a spring, which is regulated by a -screw, so that very slight changes in the space may be -made with ease.</p> - -<p>Compasses specially used for putting in fine circles -and dimensions are called “bows.” When a pen point -it is a “bow pen,” with a pencil point a “bow pencil,” -and if with needle point a “bow dividers.” <a href="#Fig180184">Fig. 180</a> -is a “bow dividers”, this fitted with screw for fine adjustment -in one leg, <a href="#Fig180184">fig. 181</a>, is called a “hair-spring -bow dividers”; for small details, bows with steel spring -legs without any joint are used; these are called “steel-spring -bows.”</p> - -<div class="container w30em" id="Fig185187"> - -<img src="images/illo123.jpg" alt="Compasses" /> - -<p class="caption">Fig. 185.—Fig. 186.—Fig. 187.</p> - -</div><!--container--> - -<p><span class="pagenum" id="Page124">[124]</span></p> - -<h3>SPRING BOWS.</h3> - -<p>These were originally developed from the common -form of compasses, with a single spring leg; later, the -demand for smaller sizes made changes necessary, and -spring bows are now made symmetrical, both sides of -the bow being made to “spring.”</p> - -<p><a href="#Fig180184">Fig. 182</a> are spring dividers.</p> - -<p><a href="#Fig180184">Fig. 183</a> is a spring pencil.</p> - -<p><a href="#Fig180184">Fig. 184</a> is a spring pen.</p> - -<p>In these figures it will be seen that the two -threads, a right and a left, are moved with one central -thumbscrew; in the <a href="#Fig185187">figs. 185 to 187</a> a single screw is -used.</p> - -<p>In choosing spring bows, care must be exercised -to select a sufficiently strong, stiff spring, as the relation -between spring pressure and thumbscrew is important.</p> - -<h3>BEAM COMPASSES AND TRAMMELS.</h3> - -<p>In <a href="#Fig188">fig. 188</a> is shown a set of beam compasses, -together with a portion of the wooden rod or beam -on which they are used.</p> - -<div class="container" id="Fig188"> -<img src="images/illo124.jpg" alt="Bem compasses" /> -<p class="caption">Fig. 188.</p> -</div> - -<p>The latter, as will be seen by the section drawn -to one side, <i>A</i>, is in the shape of a T. This form has -considerable strength and rigidity. Beam compasses -are provided with extra points for pencil or ink work, -as shown.</p> - -<p>While the general adjustment is effected by means -of the clamp against the wood, minute variations are -made by the screw, <i>B</i>, shifting one of the points, as -shown in the <a href="#Fig188">figure</a>.</p> - -<p><span class="pagenum" id="Page125">[125]</span></p> - -<p>This instrument is quite delicate, and, when in -good order, is very accurate. It should be used only -for fine work on paper, and never for scribing on -metal.</p> - -<div class="container leftfloat w20em" id="Fig189"> -<img src="images/illo125.jpg" alt="Trammel" /> -<p class="caption">Fig. 189.</p> -</div> - -<p>A coarser instrument, and one especially designed -for use upon metal, is shown in <a href="#Fig189">fig. 189</a>, and is called a -trammel. There are various forms of this instrument, -all being the same in principle. The engraving shows -a form in common use. A heavier stick is used with -it than with the beam compasses, and no other adjustment -is provided than that which is afforded by clamping -against the stick.</p> - -<p>In the <a href="#Fig189">illustration</a>, a carrier at the side is shown, -in which a pencil may be placed. Some trammels are -arranged in such a manner, that either of the points -may be detached and a pencil substituted.</p> - -<p>A trammel, by careful arrangement, can be made -to describe very accurate curves, and hence can be -used in place of the beam compasses in many instances. -For all coarse work it is to be preferred to beam compasses.<span class="pagenum" id="Page126">[126]</span> -It is useful for all short sweeps upon sheets of -metal, but for curves of a very long radius a strip of -sheet iron or a piece of wire will be found of a more -practical service than even this tool.</p> - -<p>The length of rods for both beam compasses and -tramels, up to certain limits, is determined by the -nature of the work to be done. The extreme length -is determined by the strength and rigidity of the rod -itself. It is usually convenient to have two rods for -each instrument, one about 1<sup>1</sup>⁄<sub>2</sub> or 2 feet in length and -the other considerably longer—as long as the strength -of the material will admit.</p> - -<h3>DRAWING SCALES.</h3> - -<p>Scales are proportioned rules or mathematical instruments -of wood, metal, etc., on which are marked -lines and figures for the purpose of measuring sizes and -distances. It is usual to make scales in the proportion -of parts of an inch equalling a foot; the most generally -adopted scale for machine drawing is one and a half -inches, equalling one foot; that is, twelve-eighths of an -inch (each eighth of an inch representing one inch); -there is no fixed rule in the choice of a scale, as they -are varied according to the coarseness or fineness of the -parts of the machine to be drawn and the space or surface -of paper to be utilized.</p> - -<p>When objects are of moderate proportions they -may be represented full size; but when large, the -drawings must be smaller. Standard scales for mechanical -drawings are <sup>1</sup>⁄<sub>2</sub>, <sup>1</sup>⁄<sub>4</sub>, -<sup>1</sup>⁄<sub>8</sub> and <sup>1</sup>⁄<sub>16</sub> full size. These -scales are often written 6″ = 1 ft.; 3″ = 1 ft.; 1<sup>1</sup>⁄<sub>2</sub>″ = 1 ft., -and <sup>3</sup>⁄<sub>4</sub>″ = 1 ft.</p> - -<div class="container leftfloat w07em" id="Fig190"> -<img src="images/illo127a.jpg" alt="Scale" /> -<p class="caption">Fig. 190.</p> -</div> - -<div class="container rightfloat w07em" id="Fig191"> -<img src="images/illo127b.jpg" alt="Scale" /> -<p class="caption">Fig. 191.</p> -</div> - -<p>Instead of selecting one of the scales named or one -found upon the ordinary scales used by draughtsmen, -drawings may be made to any scale whatever. Thus, -if any object is to be represented in a certain space, a -scale should be constructed which will cause the whole -of the object to be shown.</p> - -<p>Drawing to Scale.—The meaning of this is, that -the drawing when done bears a definite proportion to<span class="pagenum" id="Page127">[127]</span> -the full size of the particular part, or, in other words, -is precisely the same as it would appear if viewed -through a diminishing glass.</p> - -<p>The two-foot rule shown in <a href="#Fig192">fig. 192</a> is the most -useful instrument for the comparison of linear dimensions—it -can be used as a scale of one-twelfth, or 1 -inch equal to a foot, 12 inches = 12 feet, it being divided -into portions or spaces, each of which is subdivided -into halves, quarters, eighths and sixteenths; -frequently in the latter class of two-foot rules there are -graduations of scales, and it is then also called a -draughting scale.</p> - -<p><a href="#Fig190">Fig. 190</a> represents a flat scale, graded so that one -inch represents a foot—<sup>1</sup>⁄<sub>12</sub>th size—etc., as shown.</p> - -<p><a href="#Fig191">Fig. 191</a> represents a triangular scale (broken). -The triangular scale should read on its different edges -as follows: Three inches and 1<sup>1</sup>⁄<sub>2</sub>″ to one foot, 1″ and -<sup>1</sup>⁄<sub>2</sub>″ to one foot, <sup>3</sup>⁄<sub>4</sub>″ -and <sup>3</sup>⁄<sub>8</sub>″ to one foot, <sup>1</sup>⁄<sub>4</sub>″ and <sup>1</sup>⁄<sub>8</sub>″ to one -foot, <sup>3</sup>⁄<sub>16</sub>″ and <sup>3</sup>⁄<sub>32</sub>″ to one foot, and one edge read sixteenths -the whole 12″ of its length.</p> - -<p><span class="pagenum" id="Page128">[128]</span></p> - -<p><a href="#Fig190">Fig. 190</a> shows such a scale broken. An explanation -of the 1″ and <sup>1</sup>⁄<sub>2</sub>″ side will suffice for all. Where -it is used as a scale of 1″ to one foot, each large space, -as from 0 to 12 or 0 to 1, represents a foot, and is a -foot at that scale. There being 12″ in one foot, the -twelve long divisions at the left represent inches; each -inch is divided into two equal parts, so from 0 to one -division at the left of 9 is 9<sup>1</sup>⁄<sub>2</sub>″ and so on. The 1″ and -<sup>1</sup>⁄<sub>2</sub>″ scales being at opposite ends of the same edge, it -is obvious that one foot on the 1″ scale is equal to two -feet on the <sup>1</sup>⁄<sub>2</sub>″ scale, and conversely, one foot on the <sup>1</sup>⁄<sub>2</sub>″ -scale is equal to six inches on the 1″ scale; and 1″ -being equal to one foot, the total feet in length of scale -will be 12; at <sup>1</sup>⁄<sub>2</sub>″ to 1 foot the total feet will be 24.</p> - -<p>In working to regular scales, such as <sup>1</sup>⁄<sub>2</sub>, -<sup>1</sup>⁄<sub>8</sub>, or <sup>1</sup>⁄<sub>16</sub> -size, a good plan is to use a common rule, instead of a -graduated scale. There is nothing more convenient for -a mechanical draughtsman than to be able to readily -resolve dimensions into various scales, and the use of a -common rule for fractional scales trains the mind, so -that computations come naturally, and after a time -almost without effort.</p> - -<p>The protractor shown in <a href="#Fig193">fig. 193</a> is an instrument -for laying down and measuring angles on paper; it is<span class="pagenum" id="Page129">[129]</span> -used in connecting with a scale to define the inclination -of one line to another.</p> - -<p>Protractors have the degrees of a half circle -marked upon them; as the whole circle contains 360 -degrees, half of it will contain 180, one-quarter 90, etc. -Hence, protractors showing 180° exhibit all that is -needed. To protract means to extend, so this instrument -is also useful in “extending” the lines of inclination -at the circle.</p> - -<div class="container w30em" id="Fig192"> -<img src="images/illo128a.jpg" alt="Scale" /> -<p class="caption">Fig. 192.</p> -</div> - -<div class="container w30em" id="Fig193"> -<img src="images/illo128b.jpg" alt="Protractor" /> -<p class="caption">Fig. 193.</p> -</div> - -<h3>DRAWING-PENS.</h3> - -<p>A special pen called a drawing-pen, and also special -ink, are required to ink a drawing; <a href="#Fig194">figs. 194</a> and <a href="#Fig195">195</a> represent -two sizes of drawing-pens—one being best adapted -for fine work, and the other for coarse or heavy line -work. The points, as will be observed in the illustration, -are made of two steel blades which open and close -as required for thickness of lines by a regulating screw.</p> - -<div class="container" id="Fig194"> -<img src="images/illo129a.jpg" alt="Pen" /> -<p class="caption">Fig. 194.</p> -</div> - -<div class="container" id="Fig195"> -<img src="images/illo129b.jpg" alt="Pen" /> -<p class="caption">Fig. 195.</p> -</div> - -<p>A good drawing pen should be made of properly -tempered steel, neither too soft nor hardened to brittleness. -The nibs should be accurately set, both of -the same length, and both equally firm when in contact -with the drawing paper. The points should be so -shaped that they are fine enough to admit of absolute -control of the contact of the pen in starting and ending -lines, but otherwise as broad and rounded as possible, -in order to hold a convenient quantity of ink without -dropping it. The lower (under) blade should be sufficiently -firm to prevent the closing of the blades of the -pen, when using the pen against a straightedge.</p> - -<div class="container w30em" id="Fig196"> -<img src="images/illo130a.jpg" alt="Pen" /> -<p class="caption">Fig. 196.</p> -</div> - -<div class="container w15em" id="Fig197"> -<img src="images/illo130b.jpg" alt="Ink bottle" /> -<p class="caption">Fig. 197.</p> -</div> - -<p>The spring of the pen, which separates the two -blades, should be strong enough to hold the upper<span class="pagenum" id="Page130">[130]</span> -blade in its position, but not so strong that it would -interfere with easy adjustment by the thumbscrew. -The thread of the thumbscrew must be deeply and -evenly cut so as not to strip.</p> - -<p>An important requisite after the pencil lines have -been put in is ink, with which to line the drawing. -This should be of the best that can be procured. The -pen is filled by dropping the ink between the blades, or -nibs, while held in a nearly vertical position, as shown -in <a href="#Fig196">fig. 196</a>.</p> - -<p>Liquid India ink can be procured in bottles with -glass tube feeders, which are very good, and keep the -hands and fingers free of -the ink. <a href="#Fig197">Fig. 197</a> is a sectional -view of such a bottle -and “filler,” or feeder. This -generally answers all requirements, -but the dry ink -of good quality, in sticks or -bars, cannot be surpassed, -although it requires skill for -its preparation. <a href="#Fig198">Fig. 198</a> -represents a sloping dish or -“tile” for mixing, which -should be done with little -pressure, in clean, filtered or -distilled water, care being taken to keep the liquid free -of dust, which obstructs the free flow of the ink in -the pens.</p> - -<div class="container" id="Fig198"> -<img src="images/illo131a.jpg" alt="Dish" /> -<p class="caption">Fig. 198.</p> -</div> - -<p>The bars of India ink are shown, as they are imported, -in <a href="#Fig199202">figs. 199 to 202</a>.</p> - -<p>Pure India or China ink is only made in those<span class="pagenum" id="Page131">[131]</span> -countries, because the special wood from which it is -prepared is found only in those regions. So-called -India inks, made of lampblack and animal glue, are -only imitations; therefore India ink should be purchased -from a reliable importing house—shape is little -guarantee of quality.</p> - -<div class="container w40em" id="Fig199202"> - -<img src="images/illo131b.jpg" alt="Ink" /> - -<p class="caption">Fig. 199.—Fig. 200.—Fig. 201.—Fig. 202.</p> - -</div><!--container--> - -<p><span class="pagenum" id="Page132">[132]</span></p> - -<div class="container w30em" id="Fig203"> -<img src="images/illo132a.jpg" alt="Eraser" /> -<p class="caption">Fig. 203.</p> -</div> - -<p>Soft gray vulcanized rubber (<a href="#Fig203">fig. 203</a>) should be -used for cleaning drawing paper; for erasing any portion -of a line in pencil, a piece of prepared white vulcanized -rubber is the best, small in size and of rectangular -shape (see <a href="#Fig204205">fig. 205</a>).</p> - -<div class="container w30em" id="Fig204205"> - -<img src="images/illo132b.jpg" alt="Erasers" /> - -<div class="split4060"> - -<div class="left4060"> -<p class="caption">Fig. 204.</p> -</div> - -<div class="right4060"> -<p class="caption">Fig. 205.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split--> - -</div><!--container--> - -<div class="container leftfloat w07em" id="Fig206207"> - -<img src="images/illo132c.jpg" alt="Erasers" /> - -<div class="split5050"> - -<div class="left5050"> -<p class="caption">Fig. 206.</p> -</div> - -<div class="right5050"> -<p class="caption">Fig. 207.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--container--> - -<p>An ink eraser is made of a composition of rubber -and ground glass, and it should be used as sparingly as -possible on drawings, as it roughens the paper and removes -the gloss from its surface (see <a href="#Fig204205">fig. 204</a>). Steel -ink erasers are useful in removing defects, overrun -lines, joint of lines if swollen, etc.; they have a fine -point and can be used to advantage with a little practice; -they are used with a scratching, not a cutting, -motion (see <a href="#Fig206207">figs. 206, 207</a>).</p> - -<h3>DRAWING PAPER.</h3> - -<p>The first thing to be considered in selecting drawing -paper is the kind most suitable for the proposed -plan. Paper may be purchased in sheets 22 × 30 -inches, that make four exercise sheets 11 × 15 inches; -this may be of several grades and tints.</p> - -<p><span class="pagenum" id="Page133">[133]</span></p> - -<p>The qualities that constitute good paper are -strength, uniformity of thickness and surface, neither -repelling nor absorbing liquids, admitting of considerable -erasing without destroying the surface, not becoming -brittle nor discolored by reasonable exposure or age, -and not buckling when stretched, or when ink or color -is applied.</p> - -<p>The sizes and names of paper made in sheets is -as follows:</p> - -<table class="paper" summary="Paper sizes"> - -<tr> -<td class="size">Cap</td> -<td class="inches">13×17</td> -<td class="ditto">ins.</td> -</tr> - -<tr> -<td class="size">Demy</td> -<td class="inches">15×20</td> -<td class="ditto">„</td> -</tr> - -<tr> -<td class="size">Medium</td> -<td class="inches">17×22</td> -<td class="ditto">„</td> -</tr> - -<tr> -<td class="size">Royal</td> -<td class="inches">19×24</td> -<td class="ditto">„</td> -</tr> - -<tr> -<td class="size">Super Royal</td> -<td class="inches">19×27</td> -<td class="ditto">„</td> -</tr> - -<tr> -<td class="size">Imperial</td> -<td class="inches">22×30</td> -<td class="ditto">„</td> -</tr> - -<tr> -<td class="size">Atlas</td> -<td class="inches">26×34</td> -<td class="ditto">„</td> -</tr> - -<tr> -<td class="size">Double Elephant</td> -<td class="inches">27×40</td> -<td class="ditto">„</td> -</tr> - -<tr> -<td class="size">Antiquarian</td> -<td class="inches">30×53</td> -<td class="ditto">„</td> -</tr> - -</table> - -<p>For large drawings paper is made in rolls. “Detail -paper” is especially made for marking out new -designs; it is made in rolls 36, 42 and 54 inches wide; -it has excellent erasing qualities and takes ink and -color with facility.</p> - -<p>When working by artificial light it is desirable that -the paper be of a light-brown color, which is less trying -to the eyes than a pure white.</p> - -<p>If it is a shop drawing or sketch not to be preserved, -use detail paper, which is the most economical -and will stand a great deal of handling without becoming -soiled. If it is a detailed plan, finished drawing -or a picture, use the best white drawing paper to be -obtained, so that your drawings can be preserved -indefinitely without danger of fading, which is due -either to the paper being poorly made and discoloring -with age, or being of poor fiber and absorbing the ink -or color, and the drawing consequently losing its -brightness.</p> - -<p>After deciding on the size of paper most suitable -for the work, then carefully select the paper -embracing the most qualities of value for the proposed -drawing.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page134">[134]</span></p> - -<div class="container w40em" id="Fig208"> -<img src="images/illo134.png" alt="Spiral" /> -<p class="caption">Fig. 208.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page135">[135]</span></p> - -<div class="container w30em"> -<img src="images/illo135.png" alt="MECHANICAL DRAWING" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page136">[136]</span></p> - -<div class="container w40em" id="Fig209"> -<img src="images/illo136.png" alt="Hand and compasses" /> -<p class="caption">Fig. 209.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page137">[137]</span></p> - -<h2 class="nobreak">Mechanical Drawing.</h2> - -</div><!--chapter--> - -<p>In distinction to “free-hand,” mechanical drawing -is executed almost entirely by the use of the instruments -previously described; hence its other term, -instrumental drawing. To define it particularly it may -be said <span class="nowrap">that,—</span></p> - -<p>Mechanical drawing is the correct reproduction of -any figure or part of a machine, whether of full size or -reduced in the proportion of one part to another; it -also comprises the art of delineating the interior parts -which are hidden from view in solid bodies.</p> - -<p>A mechanical drawing is the vehicle for conveying -the ideas of the designer to those who are to embody -them in wood and metal, and the considerations which -should govern its production are those which affect its -clearness and legibility or those which facilitate reference -to it.</p> - -<p>Drawings consist of plans, elevations and sections; -plans being views on the top of the object in a -horizontal plane; elevations, views on the sides of the -object in vertical planes; and sections, views taken on -bisecting planes, at any angle through an object.</p> - -<p>Drawings in true elevation or in section are based -upon flat planes, and given dimensions parallel to the -planes in which the views are taken.</p> - -<p>Two elevations taken at right angles to each other -fix all points, and give all dimensions of parts that have -their axis parallel to the planes on which the views are -taken; but when a machine is complex, or when several -parts lie in the same plane, three and sometimes four -views are required to display all the parts in a comprehensive -manner.</p> - -<p>A man must have either a natural talent for hand-drawing<span class="pagenum" id="Page138">[138]</span> -or years of experience, before he can produce -a sketch and “dimension” it, fit to work from; hence -the elementary character of the examples given for -practice. A “pretty” drawing is not expected from -a beginner; it should always be borne in mind, that -correctness of dimensions and general clearness, rather -than elaborate finish, are what will save the battle in -the days of competition.</p> - -<p>Mechanical drawings should be made with reference -to all the processes that are required in the construction -of the work, and the drawings should be -responsible, not only for dimensions, but for adaptation -to fitting, forging, pattern-making, moulding, and so on.</p> - -<p>Every part laid down should have something to -govern it that may be termed a “base”—some position -which, if understood, will suggest size, shape and relation -to other parts. Searching after a base for each -and every part and detail, the draughtsman should proceed -upon a regular system, continually maintaining a -test of what is done.</p> - -<p>A mechanical drawing consists chiefly of three -views:</p> - -<div class="diagonalp"> -<p>1. The plan or top view.<br /> -<span class="padl4">2. The side elevation.</span><br /> -<span class="padl8">3. The end elevation.</span></p> -</div> - -<p>In addition to the above, drawings are used to -show interior portions of the figure; these are termed -“sections,” and they may be taken where any plane -crosses another.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—The word <i>elevation</i>, as applied to mechanical drawings, -means simply a view; hence a side elevation is a side view, -or an end elevation is an end view.</p> - -<p>The word <i>plan</i> is employed in place of the word top; hence -a plan view is a top view or a view looking down upon the top of -the piece.</p> - -<p>A <i>general</i> view means a view showing the machine put together -or assembled, while a detail drawing is one containing a -detail, as a part of the machine or a single piece disconnected -from the other parts of the whole machine.</p> - -</div><!--note--> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page139">[139]</span></p> - -<h2 class="nobreak">Penciling.</h2> - -</div><!--chapter--> - -<div class="container rightfloat w05em" id="Fig211"> -<img src="images/illo139.jpg" alt="Pencil" /> -<p class="caption">Fig. 211.</p> -</div> - -<p>It is very nearly true, as has been said, that every mechanical drawing is, in the first instance, -penciled; if this is so, then more work is done with the pencil than with the pen; therefore the -first attention of the student of mechanical drawing should be directed to the following instructions -for penciling a drawing.</p> - -<p>With all necessary materials in hand, and in good order for the beginning of a drawing, the -first thing to do is to pin the paper on the board quite square.</p> - -<p>To do this effectively, lay the paper flat and put on the T-square with its head at the left -side of the board; slide the square up nearly to the top, and arrange the paper level with the -blade; with the right hand hold the paper still and move the square down a little; now, pin the -top of the paper with thumb-tacks.</p> - -<p><span class="pagenum" id="Page140">[140]</span></p> - -<p>Next, pressing the square lightly to the paper, -slide it down to the bottom and pin that part of the -paper to the board. The paper must not project outside -or over the edges of the board, and the pins or -tack-heads should be forced down flush with the paper, -so as not to interfere with the free movement of the -tee-square up and down the board as occasion may -require.</p> - -<p>The accuracy of the work depending upon their -condition, it is first needful to see that the pencil and -pencil compasses are properly sharpened. Reference -is made to valuable directions contained on pages beginning -with 55, under the heading of “Free-hand -Drawing,” to which may be added <span class="nowrap">that—</span></p> - -<p>All lines should be drawn with the pencil slightly -inclined in the direction in which it is moved.</p> - -<p>Any and all lines not needed in the finished drawing -should be erased at one time after the final lines -have been determined, for the surface of the paper is -soiled very quickly when worked upon after erasures -have been made.</p> - -<p>The working lines and other lines that are to be -removed should be erased when the drawing is ready -to finish and before its outlines have been strengthened, -in order that the final lines may be left in perfect -condition.</p> - -<p>To show where the lines meet or terminate it is -needful that all pencil lines pass the actual ending -place, making a distinct intersection. This does not -apply to “inking in” the lines, but rather to prevent -the over-drawing of the ink lines, because the edge of -the rule and the pen itself obstruct or partly cover the -view of the line, it is very liable to pass over or beyond -the required point in inking the lines, which must -not occur.</p> - -<p><span class="pagenum" id="Page141">[141]</span></p> - -<p>In the preliminary operation of producing a regular -mechanical or instrumental drawing, it is necessary -to make a “sketch,” in pencil, of the object to be -represented. The <span class="smcap">American Machinist</span> has given in -a few words the order to be followed, in effecting the -best results; we quote, as follows:</p> - -<p>“In making a free-hand sketch of an object from -the model it is well to observe the following order: -Look the model over carefully and determine the -number of views necessary to illustrate it fully, drawing -the same, free-hand, in their proper relation to each -other, on sketching paper. Look the sketch over -carefully to see that nothing has been omitted, and put -on dimension lines, after which scale the model carefully -and put on dimensions. Do not put in the -dimensions at the same time the dimension lines are -drawn; have all the dimension lines in place before -attempting to insert dimensions.</p> - -<p>“Follow the same order in making the drawing -with instruments as was used in making the sketch; -that is, draw the views in their proper relation to each -other, put in dimension lines, then dimensions, and -lastly notes and title. If section drawing is made, do -not draw section lines in pencil.”</p> - -<h3>POINTS TO BE OBSERVED IN SKETCHING.</h3> - -<p>1. Especial attention is to be paid to outlines—edges -of plane surfaces are lines; when a line is made -it represents the edge or outside of something.</p> - -<p>2. Learn to be accurate before being rapid.</p> - -<p>3. A sketch should be intelligible to any one, -even if they are unacquainted with drawing.</p> - -<p>4. Horizontal and vertical lines and a few curves -will enable one to make almost any simple sketch.</p> - -<p>5. It must be also remembered in making drawings -from actual measurement that the instruments are -not in the first place employed; the rough sketch is -first made and then it is converted into a drawing. -The draughtsman makes a rough sketch entirely by -the hand and eye, measures the various parts, and jots<span class="pagenum" id="Page142">[142]</span> -down the measurements in his sketch; after this he -reduces the whole to the desired scale, and proceeds to -make his mechanical drawing.</p> - -<p>6. Let the sketch book be the constant companion -of the student; it may be advantageously -filled with outlines of machine or other work suitable -for preservation, to be made into finished drawings, or -for reference. Sketches are often valuable for reference -as aids in originating new designs.</p> - -<p>7. A sketch, when possible, should have all the -dimensions written upon it, <span class="nowrap">but—</span></p> - -<p>8. Sketches in shop practice should not take the -place of working-drawings; the latter have a check -upon them in being drawn to a scale—hence the -figures written upon them and dimensions by scale -must agree.</p> - -<p>9. Place title and date on each sketch—no matter -how seemingly unimportant—for future reference.</p> - -<p>10. Practice sketching at every favorable opportunity. -There is no necessity for detail at first—simply -the outlines of the article and its parts.</p> - -<p>11. Sketch-books, with paper bound in cloth -covers, are utilized for bold, off-hand sketches by -experienced draughtsmen, but a single sheet of paper, -used on both sides, is not unworthy of service in an -emergency—or even the blank side of a letter may be -available. Sketching-blocks, or paper “pads,” 4 × 6, or -more, in size, and containing 48 sheets, are sold by -stationers, and are found to be most convenient to -have in hand and for practical use. Portfolio-envelopes, -made of extra length paper (manila) are -useful in filing away sketches and drawings. The size -10<sup>1</sup>⁄<sub>2</sub> × 15 is used for United States Patent Office -drawings.</p> - -<p>The function of the pencil—in mechanical drawing—is -to make a path for the pen to follow. If it were -possible to make a drawing with all its lines ending at -the proper place, at the first time, there would be no -necessity for using the pencil. One is obliged, however, -so to use the pencil that all lines pass beyond the -actual ending place, thus making a distinct point for -the drawing pen to stop at.</p> - -<p><span class="pagenum" id="Page143">[143]</span></p> - -<p>The pencil should be pressed to the paper just -enough to make a clean, fine line, and no more; once -over the path is sufficient, if the line is visible and true.</p> - -<p>To sharpen drawing pencils, 1, use a fine file, after -taking off enough of the wood with a knife; 2, make a -conical point for the free-hand drawing pencils and a -chisel point for ruling and marking distances.</p> - -<p>Pencil compasses are instruments where one leg is -provided with a pencil point. <a href="#Fig209">Fig. 209</a> shows the mode -of manipulation of those shown in <a href="#Fig180184">fig. 180</a> and <a href="#Fig180184">fig. 181</a>.</p> - -<p>The pencil compass is held by the projection -above the joint between the thumb and first finger, -which enables it to be rotated by a movement of the -finger without causing any undue pressure on the points. -Should much pressure be applied, there is a tendency -to force the point or center through the paper, making -an ugly center mark; at the same time the pressure -tends to break off the pencil point.</p> - -<p>These few illustrations from <a href="#Fig212">fig. 212</a> to <a href="#Fig216219">fig. 219</a> are -made designedly simple, so that they may be utilized -in “free-hand” work, for which they are good practice, -as well as serving for examples in mechanical -drawing.</p> - -<div class="container w40em" id="Fig212"> -<img src="images/illo143.png" alt="Bobbin" /> -<p class="caption">Figs. 212.</p> -</div> - -<p><a href="#Fig212">Figs. 212</a>, showing a spool or bobbin, exhibit three -views, viz.: front elevation or plan, and section; both -are drawn with simple lines, the end elevation by -circles.</p> - -<p><span class="pagenum" id="Page144">[144]</span></p> - -<div class="container w30em" id="Fig213214"> - -<img src="images/illo144a.png" alt="Bolts" /> - -<p class="caption">Fig. 213.—Fig. 214.</p> - -</div><!--container--> - -<p><a href="#Fig213214">Figs. 213 and 214</a> are two side views of a hexagon -head bolt. <a href="#Fig216219">Figs. 216 and 217</a> are a square head bolt—two -side views and end view. <a href="#Fig216219">Figs. 218 and 219</a> are -a front and edge view of a forked or double joint.</p> - -<div class="container w40em" id="Fig215"> -<img src="images/illo144b.png" alt="Handle" /> -<p class="caption">Figs. 215.</p> -</div> - -<p><a href="#Fig215">Figs. 215</a> show three views of a file handle; -the front view and section are practice for compound -curves and curved lines meeting straight ones; all -these are capable of being produced by instruments.</p> - -<p>Moreover, many of the views and illustrations used -to instruct and explain machine tools and other devices -in other parts of the volume, are drawn so that they -may be used also as examples in advanced instrumental -practice. This is a “hint” to the diligent and painstaking -student worthy of remembering.</p> - -<p><span class="pagenum" id="Page145">[145]</span></p> - -<div class="container" id="Fig216219"> - -<img src="images/illo145.png" alt="Drawings" /> - -<p class="caption">Fig. 216.—Fig. 217.—Fig. 218.—Fig. 219.</p> - -</div><!--container--> - -<p><span class="pagenum" id="Page146">[146]</span></p> - -<p>The designing and drawing of arcs and whole circles -occupy a large proportion of space in nearly all -mechanical drawings. The making of a complete circle -is a matter of no great difficulty, but the beginning -and termination of parts of circles require both judgment -and considerable practice.</p> - -<p>To aid the student these two illustrations of circles -are introduced. To draw <a href="#Fig220">fig. 220</a> with a pencil, -using the upper edge of the blade of the T-square -as a guide, draw a center line, <i>A B</i>, mark on it a distance -of 4 inches, space this into half inches, using the -dividers and making the points with it; then with the -pencil compasses or bow pencil, which must be held as -shown on page 209, and rotated from left to right, or -clockwise, draw a series of circles through these points, -tangent to one another or all touching at <i>A</i>, care being -taken that the pencil lines exactly meet at <i>A</i>, and -also cut the divided points as shown in the illustration. -For <a href="#Fig221">fig. 221</a> divide the center line as before, and draw -the semi-circles on it <i>A B</i>, <i>B C</i>, meeting at <i>B</i>, and -<i>C D</i>, <i>D E</i>, etc.</p> - -<div class="container w30em" id="Fig220"> -<img src="images/illo146a.png" alt="Circles" /> -<p class="caption">Fig. 220.</p> -</div> - -<div class="container w30em" id="Fig221"> -<img src="images/illo146b.png" alt="Circles" /> -<p class="caption">Fig. 221.</p> -</div> - -<p><span class="pagenum" id="Page147">[147]</span></p> - -<p>Now from center <i>B</i> draw circles <i>A C</i>, <i>C E</i>, meeting -in <i>C</i>, and so on with the circles, arcs or segments; -success in drawing this figure depends on the correct -spacing of the center line in the first instance into -equal parts.</p> - -<p>The T-square should be used for drawing horizontal -lines only. Its head should always be placed upon -the left edge of the board. Vertical lines should be -drawn by the use of a triangle placed upon the T-square -and not by means of the T-square only; because -the edges of a board are seldom at right angles to each -other, and the blade of the T-square is often not at -right angles to the head, so that lines at right angles to -each other will not result from the use of the T-square -upon all edges of the board. Only the upper edge of -the T-square should be used, as the edges are often not -quite straight or parallel.</p> - -<p>The 45° triangle has two angles of 45° and one of -90°. The 30° and 60° triangle has an angle of 30°, one -of 60°, and one of 90°. By placing these triangles upon -the T-square, lines at any of these angles with a vertical -or horizontal line may be drawn.</p> - -<p>Drawings finished in ink are much more effective -and desirable than pencil drawings; but as a good inked -drawing cannot be made except upon an accurate pencil -drawing, students should begin with the pencil, and -should not use ink until they are able to produce satisfactory -results in pencil.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page148">[148]</span></p> - -<h2 class="nobreak">Projection.</h2> - -</div><!--chapter--> - -<p>The word projection means to throw forward, and in ordinary machine drawing it is the projecting or -throwing forward of one view from another view.</p> - -<p>In drawings the lines in one view or plan may be availed of to find those of others of the same object, -and also to find their shape or curvature as they would appear in the other representations; this is called -projection-drawing.</p> - -<p><a href="#Fig222">Fig. 222</a> is the illustration as shown in <a href="#Fig212">fig. 212</a> on -page 143, with the addition of dotted projection line, -which illustrates the method of throwing forward the -section and the end view of the object; these two -views are procured from the plan or first figure, as -shown in <a href="#Fig222">fig. 222</a>.</p> - -<p><a href="#Fig224">Fig. 224</a> represents the square bolt and nut shown -in <a href="#Fig216219">fig. 216</a>, and the mode of projecting is similarly -shown by dotted lines.</p> - -<p><a href="#Fig223">Fig. 223</a> shows file handle shown in <a href="#Fig215">fig. 215</a> and -the mode of projecting.</p> - -<div class="container w40em" id="Fig222"> -<img src="images/illo149a.png" alt="" /> -<p class="caption">Fig. 222.</p> -</div> - -<div class="container w40em" id="Fig223"> -<img src="images/illo149b.png" alt="" /> -<p class="caption">Fig. 223.</p> -</div> - -<div class="container w40em" id="Fig224"> -<img src="images/illo149c.png" alt="" /> -<p class="caption">Fig. 224.</p> -</div> - -<p>The principles upon which “projection” in drawing -is based, are illustrated in the following examples<span class="pagenum" id="Page149">[149]</span> -and text: As a real object can be scaled with a foot -rule, so a drawing must permit of scaling and measuring. -This measuring may take place as with the real -object in full size or the drawing may, for the sake of -convenience, be reproduced and measured in a reduced -scale, as half, or in still smaller sizes. Sometimes it<span class="pagenum" id="Page150">[150]</span> -may prove convenient to enlarge the drawing to twice -the natural size of the object, as a means of making it -stand out more clearly than the real size would -accomplish.</p> - -<p>For practical purposes, it is productive of economy -of time to mark the dimensions of height and width -or depth on the drawing in figures, to avoid the scaling. -This marking of the dimensions is best done at the -time of making the drawing, while the conception of -the object is clear.</p> - -<p>To convey a correct impression of the object, all -lines that are marked to be of equal length should appear -equally long on the drawing and be capable of being -scaled to such equal length; for this, it must be assumed -that the eye of the observer is equally distant -from all points of a plane through the nearest point, or -one of the axes of the object, and that the lines -of sight are all parallel to each other and square to -this plane.</p> - -<p>In <a href="#Fig225">fig. 225</a> these lines of sight are seen as directed -toward one side of a cube or block; it will be readily -understood, however, that in this way nothing is visible -and accessible for scaling and dimensioning except -this front face of the block, thus, a determination of -the dimensions of only height and width would be possible, -while the dimension of depth is entirely undetermined.</p> - -<div class="container w30em" id="Fig225"> -<img src="images/illo151.png" alt="Sight lines" /> -<p class="caption">Fig. 225.</p> -</div> - -<p>It is thus necessary to get a view of the block from -another side; the direction in which it will be most -instructive to obtain additional views is in the direction -of the breadth and of the length and square to the -lines of sight of the first view.</p> - -<p><a href="#Fig226">Fig. 226</a> shows how the lines of sight would strike -the object in the three directions. If these lines should -be rays of light, some of them would pass by the body<span class="pagenum" id="Page151">[151]</span> -until they squarely strike the large plane surfaces, -<i>I</i>, <i>II</i>, <i>III</i>; naturally the rays of light on the faces of -the object will be retained, and cannot strike the plane -surfaces, thus leaving dark shadows of exactly the same -outlines as the block; these would be exact drawings -of the faces, and if by some means they can be fixed -and retained on the plane they can be completely -measured and dimensioned.</p> - -<p>This throwing forward of the outline of the object -in different views on the planes is called projection of -the object, and furnishes a highly important means of -fixing the outlines and dimensions in the three main -directions of height, width and depth; evidently, the -light rays passing by the front face may not all reach -the plane of projection, but they may be retained by -protruding parts of the object behind the front face. -These protruding parts naturally would also be projected -on the plane in the same manner as the main -body of the block.</p> - -<p><span class="pagenum" id="Page152">[152]</span></p> - -<p>These projections of the protruding part are plainly -visible in plane <i>II</i> and plane <i>III</i>, while the part would -not be drawn in outline in plane <i>I</i>. It may be imagined, -however, that the greater thickness of the body -in the direction of the protruding part would intensify -also the shadow, thus outlining the face of the protruding -part in plane <i>I</i>.</p> - -<p>It is apparent that these three projections are all -needed, but as drawing is all done in one single plane, -the three projections will for the sake of convenience -have to be brought into a single plane. This can be -realized if plane <i>II</i> is swung around axis <i>O Z</i> and -plane <i>III</i> around axis <i>O Y</i>, until all three surfaces are -in one single plane, which would then appear as shown -in <a href="#Fig227">fig. 227</a>.</p> - -<p>It is also possible to assume transparent planes in -front of the body and extend the parallel lines of sight -forward instead of backward. Thus an outline picture -will be created on each of the three planes <i>I</i>, <i>II</i>, <i>III</i> in -<a href="#Fig228">fig. 228</a>, in a manner similar to <a href="#Fig226">fig. 226</a>. For drawing -purposes, all three views again have to be brought into -a single plane, which is done by swinging <i>II</i> around -<i>O Z</i>, and <i>III</i> around <i>O Y</i> in the same manner as <a href="#Fig227">fig. 227</a> -was evolved from <a href="#Fig226">fig. 226</a>.</p> - -<p>It will be noted that in <a href="#Fig229">fig. 229</a> plane <i>III</i> is now -above <i>I</i> and plane <i>II</i> on the left-hand side of <i>I</i>, while -in <a href="#Fig227">fig. 227</a> they were below and at the right-hand side -of plane <i>I</i>. As the swinging of the top and side planes -takes place around the edges of the front plane <i>I</i> two -systems may thus be distinguished, according to the -position of plane <i>I</i> in regard to the object. <a href="#Fig226">Fig. 226</a> -thus represents the system of backward projection, -while <a href="#Fig228">fig. 228</a> represents the system of forward projection.</p> - -<p>Either system can have, however, the plane <i>II</i> at -the right- or left-hand side edge, while plane <i>III</i> may -be attached to the top or bottom edge of plane <i>I</i>; it -is readily understood that a number of combinations -are possible for each system, as it is not necessary to -adhere absolutely to one rule. The system of forward -projection is the one generally practiced and further -examples are all executed by this system, meaning that -the planes are always between the observer and the object.</p> - -<p><span class="pagenum" id="Page153">[153]</span></p> - -<div class="container w40em" id="Fig226"> -<img src="images/illo153.png" alt="Projections" /> -<p class="caption">Fig. 226.</p> -</div> - -<p><span class="pagenum" id="Page154">[154]</span></p> - -<div class="container w40em" id="Fig227"> -<img src="images/illo154.png" alt="Projections" /> -<p class="caption">Fig. 227.</p> -</div> - -<p><span class="pagenum" id="Page155">[155]</span></p> - -<div class="container w40em" id="Fig228"> -<img src="images/illo155.png" alt="Projections" /> -<p class="caption">Fig. 228.</p> -</div> - -<p><span class="pagenum" id="Page156">[156]</span></p> - -<p>For the clearness of the drawing, it is desirable to -have all corners, edges and outlines appear in such -solid lines as they appear to the eye. If, therefore, -certain sharply defined outlines occur on one side more -than on the opposite one, it is most desirable to take the -view against the side that has the most definitely -marked outlines.</p> - -<p>If the opposite side should show a number of -wholly different features, it may prove even desirable -to show this side also, thus gaining four views instead -of the usual three, and so obtain a more complete -understanding of the shape of the object, besides -giving increased facilities for dimensioning each part of -the body.</p> - -<p>This additional view may be taken from the sides, -as well as up or down, thus making a maximum of five -views possible by which the outside of the object may -be delineated.</p> - -<p><a href="#Fig230">Fig. 230</a> shows why it may be desirable to take -five views of a block that has a receding space of different -outlines in each of the side and top and bottom -faces.</p> - -<p>It is not necessary, however, to resort to five -views in such a case as is represented in <a href="#Fig230">fig. 230</a>, as the -only differing feature, the circular space in <i>III</i> bottom, -might be shown in <i>III</i> top by dotted lines, and the -difference of <i>II</i> right might be shown in <i>II</i> left, also by -dotted lines. It is desirable to show four or five views -only where great complication and consequent lack of -clearness through numerous dotted lines would result -from having a less number of views.</p> - -<div class="container w40em" id="Fig229"> -<img src="images/illo157.png" alt="Projections" /> -<p class="caption">Fig. 229.</p> -</div> - -<p>So far the projections and views have only represented -the outlines of the object; it may often be -desirable, however, to show central holes or other perforations<span class="pagenum" id="Page157">[157]</span> -or variations of sections; in this case it is -possible to imagine the object cut in slices, by planes, -through certain well defined axes, or other lines of -distinctive importance, and then take a view of this -sectional plane with its newly created intersections or -sharply marked outlines; thus, a section may often -take the place of the third, fourth or fifth view to great -advantage.</p> - -<p><span class="pagenum" id="Page158">[158]</span></p> - -<div class="container w35em" id="Fig230"> -<img src="images/illo158.png" alt="Projections" /> -<p class="caption">Fig. 230.</p> -</div> - -<p><span class="pagenum" id="Page159">[159]</span></p> - -<p>It is not always possible to get a view against a -face or side of the object, but, with irregularly shaped -bodies or under special conditions, it may be necessary -to take a view of corners, sloping planes, curved -or irregularly shaped surfaces.</p> - -<p><a href="#Fig231">Fig. 231</a> shows a hexagonal nut in the three normal -projections; from the top view it is readily seen -that the front view shows the side of the hexagon in a -contracted scale, and that therefore the scaling and -dimensioning for the horizontal direction have all to be -done in the top or plan view; the front and side views -convey, however, the dimension of height correctly, -and these are therefore the right places for scaling and -dimensioning in the vertical direction.</p> - -<p><a href="#Fig231">Fig. 231</a> shows how a cylindrical outline appears -in the three views; the hole in the nut presents itself -as circular in the top view, while it appears in the front -and side views as a rectangle. For simple objects, it -is unnecessary to show the edges of the planes, and the -three views are grouped, as regards distances and positions, -as most convenient for the execution of the -drawing.</p> - -<p>Where sloping surfaces are of irregular form, it -may be necessary to employ help lines for their full determination -in the three views. <a href="#Fig232">Fig. 232</a> shows how -the surface that is produced by a slanting cut through -a cylinder would appear in the three views. The help -lines are placed in the top view in eight equal divisions -around the circumference of the cylinder. These division -lines are shown by dotted lines on the cylinder in<span class="pagenum" id="Page160">[160]</span> -the front and side views. Their intersections, with the -sloping cut in the front view, furnish also the height -of the corresponding points for the side view.</p> - -<div class="container w40em" id="Fig231"> -<img src="images/illo160.png" alt="Projections" /> -<p class="caption">Fig. 231.</p> -</div> - -<p>By progressive determination of points, lines and -surfaces, even the most complicated bodies can be -completely represented for their reproduction in any -application to mechanical or industrial purposes.</p> - -<p><span class="pagenum" id="Page161">[161]</span></p> - -<div class="container w40em" id="Fig232"> -<img src="images/illo161.png" alt="Projections" /> -<p class="caption">Fig. 232.</p> -</div> - -<p><span class="pagenum" id="Page162">[162]</span></p> - -<p>The spur wheel shown on <a href="#Page163">page 163</a> is an example -of projection drawing.</p> - -<p>The wheel is illustrated in three views: <a href="#Fig233235">fig. 235</a> is -a side view, or elevation; <a href="#Fig233235">fig. 234</a> is a front elevation; -<a href="#Fig233235">fig. 233</a> is a section view on <i>C D</i>. The section is projected -from the front elevation by drawing parallel -lines from the points in front elevation where the lines -are intersected by the center line <i>C D</i>, cutting the -plane of view and showing the interior shape at <i>C D</i>.</p> - -<p>The side elevation, <a href="#Fig233235">fig. 235</a>, is projected from the -front elevation, <a href="#Fig233235">fig. 234</a>, by drawing parallel lines -from the edges in the front view across its face.</p> - -<p>In actual drawing practice the figures should be -made about three times larger than the example, and -as follows:</p> - -<p>For the front elevation draw the center lines <i>A B</i>, -<i>C D</i>, and from their point of intersection as a center, -with the compasses draw the inner circle or hole, also -the pitch line <i>E E</i>. With the dividers space this line -into nineteen equal divisions; each point on this line -will be the center of a tooth, and the distance from one -point to the next one is the pitch of the tooth.</p> - -<p>Now, with the dividers mark off the thickness of -tooth at each side of these points on pitch line; with -the compasses draw the outer circle for points of teeth, -the inner circle for the root of teeth, and circles for -thickness of rim and hub; also circles representing the -fillets at rim and hub. For clearness and to prevent -confusion these lines are shown on one-half the wheel -only, terminating in center line <i>C D</i>; all the lines of -the front elevation are now complete excepting the -teeth.</p> - -<p>In the drawing office it is unusual to delineate all -the teeth in a gear wheel, the lines without the teeth -as now completed being deemed sufficient, giving all -particulars; however, to prevent the error of mistaking -the circles it is well to represent one or two teeth on -the drawing.</p> - -<p><span class="pagenum" id="Page163">[163]</span></p> - -<div class="container" id="Fig233235"> - -<img src="images/illo163.png" alt="Gear" class="bl br" /> - -<p class="caption">Fig. 233.—Fig. 234.—Fig. 235.</p> - -</div><!--container--> - -<p>In the example, proceed and complete the entire<span class="pagenum" id="Page164">[164]</span> -wheel, taking on the compasses a radius equal to the -pitch of the tooth; set them on the pitch line at the -point <i>G</i>, already spaced for thickness of tooth, draw -line <i>H</i> from pitch line to root of tooth; proceed similarly -all around the circle, completing one side. Next, -reverse the operation and draw the corresponding side -of the root of tooth. Now take a radius equal to half -the space between teeth and the thickness of tooth on -pitch line, and, with center in pitch line, as shown at -<i>I</i>, draw the outside or addendum of tooth, <i>J</i>; it will be -apparent that the reverse addendum of the tooth next -adjoining can be formed at the same time, with one -setting of the compasses; finish all the teeth similarly; -the front elevation will thus be completed.</p> - -<p><a href="#Fig233235">Fig. 233</a> is an excellent example of sectional drawing, -to be executed as follows:</p> - -<p>First draw the center line <i>L M</i> of <a href="#Fig233235">fig. 233</a>, lay off -at each side of it half the breadth of face and of the -hub; now project, from center line <i>C D</i>, in the front -elevation, <a href="#Fig233235">fig. 234</a>, with the T-square the upper and -lower teeth, the fillets, the chamfers, the hub and center -hole, also dot in the pitch line <i>F F</i>, take the radii -and draw the fillets and chamfers; draw section lines -and the view will appear as shown in <a href="#Fig233235">fig. 233</a>.</p> - -<p><a href="#Fig233235">Fig. 235</a> is a side elevation of <a href="#Fig233235">fig. 234</a>, and is a fine -sample of projection, to be executed as follows:</p> - -<p>Proceed similarly as for <a href="#Fig233235">fig. 233</a>, projecting the -lines from the outside edges of the front elevation, instead -of from the center line <i>C D</i> as in last figure, and -the end elevation will be as shown in <a href="#Fig233235">fig. 235</a>.</p> - -<p>The student will be assisted in understanding this -working drawing by consulting the <a href="#Page196">pages</a> under the -heading of “Gearing.”</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page165">[165]</span></p> - -<div class="container w30em"> -<img src="images/illo165.png" alt="LETTERING, INKING, SECTION LINING" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page166">[166]</span></p> - -<div class="container w40em" id="Fig236"> -<img src="images/illo166.png" alt="Drawing" /> -<p class="caption">Fig. 236.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page167">[167]</span></p> - -<h2 class="nobreak">“Inking In” Drawings.</h2> - -</div><!--chapter--> - -<p>When a drawing is completely finished in penciling, -it should next be “inked in” for preservation.</p> - -<p>Care should be used that the pen may be perfectly -clean; the pen should be held nearly vertical, leaning -just enough to prevent it from catching on the paper; -the pen should be held between the thumb and first -and second fingers, the knuckles being bent, so that it -may be at right angles with the length of the hand.</p> - -<p>The ink should be rubbed up fresh whenever it is -about to be used, for it is better to waste a little time -in preparing ink slowly than to be at a continual -trouble with pens, which will occur if the ink is ground -too rapidly or on a rough surface.</p> - -<p>To test ink, a few lines can be drawn on the -margin of a sheet, noting the shade, how the ink flows -from the pen, and whether the lines are sharp. After -the lines have dried, cross them with a wet brush; if -they wash readily, the ink is too soft; if they resist the -water for a time and then wash tardily, the ink is -good.</p> - -<p>Care must be exercised not to overload the pen -with ink, and, like the pencil, the pen should always -be moved from left to right and from the bottom to -the top of the board. When inking, both “nibs” of -the pen point must rest evenly on the paper and the -pen be pressed only lightly against the T-square. -Never ink any portion of a drawing until the penciling -is complete.</p> - -<p><span class="pagenum" id="Page168">[168]</span></p> - -<p>In inking long, fine lines it is well to go over each -line twice, without moving the T-square, trying not to -widen the line on the second passage; also see that -the pen contains ink enough to finish a line, as it is -difficult to continue with the same width of line after -re-filling.</p> - -<p>To produce finished drawings, it is necessary that -no portion should be erased, otherwise the color applied -will be unequal in tone; thus, when highly finished -mechanical drawings are required, it is usual to draw -an original and to copy it. Where sufficient time cannot -be given to draw and copy, a very good way is to -take the surface off the paper with fine sand-paper -before commencing the drawing; if this be done, the -color will flow equally over any erasure it may be -necessary to make afterwards.</p> - -<p>The rules of procedure in drawing the lines in -“inking” are, 1, ink in the small circles and curves; -2, ink in the larger circles and curves; 3, then all -the horizontal lines, beginning at the top of the -drawing and working downward; 4, next ink in all the -vertical lines, commencing at the left and moving back -to the right; 5, draw in the oblique lines; 6, all the -center lines and dimension and reference lines. The figuring -and lettering should be always done with India -ink, thoroughly black; the last lines to be drawn are -the section lines. The reason why irregular curves -and arcs of circles are inked in first is, that it is easier -to draw a straight line up to a curve than to take a -curve up to a straight line.</p> - -<p>In practice, the flat side of the drawing-pen is laid -against the tee-square or ruler; the taper of the blade -of the pen is sufficient to throw the point enough away -from the edge to prevent blotting; the pen is drawn -from left to right and from the bottom to the top of -the board.</p> - -<p>This is shown in <a href="#Fig237">fig. 237</a>, intended to represent -“short work” with the drawing-pen. The wrist is -shown resting upon the blade of the square.</p> - -<div class="container w30em" id="Fig237"> -<img src="images/illo169.png" alt="" /> -<p class="caption">Fig. 237.</p> -</div> - -<p><span class="pagenum" id="Page169">[169]</span></p> - -<div class="container w25em" id="Fig238"> -<img src="images/illo170.png" alt="Drawing" /> -<p class="caption">Fig. 238.</p> -</div> - -<p>In a similar figure, <a href="#Fig238">238</a>, the position of the hand -holding the pen indicates the best relative posture for -inking long lines. In one of these illustrations the -work is executed principally by the wrist—in the other -by the arms and fingers working together.</p> - -<p>The pen should be held with even pressure against -the straight-edge or curve. If the pressure varies, the -blades will spring and the width of the line will change. -The blades should be of such length that both will -bear equally upon the paper when the pen is inclined -slightly, so as to bring the inner blade near the straight-edge; -the angle of the pen should not be changed -while drawing any line.</p> - -<p>When the inking is finished, the whole drawing -may be cleaned by rubbing it with bread which is not -greasy or so fresh as to stick to the paper. If the -paper is much soiled it may be necessary to use an -eraser. A soft pencil eraser should be used and great -care taken that the ink lines are not lightened and -broken by it.</p> - -<p><span class="pagenum" id="Page170">[170]</span></p> - -<p>To avoid the necessity of using an eraser upon a -finished drawing, instruments and paper must be kept -free from dust and dirt. The triangles and T-square -should be cleaned often, by rubbing them vigorously -upon rough, clean paper.</p> - -<p>Pounce is a powder used to prevent blotting in -rewriting over erasures; it is held in a bag or small -box with a perforated lid for convenience in sprinkling -on paper; when used it should be distributed evenly -with a piece of chamois, and the surplus or loose particles -removed before applying the ink.</p> - -<p>A drawing is made to be read, and the skill in inking, -as in “free-hand” and in penciling, does not consist -so much in the fineness of the lines as in their -clearness.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page171">[171]</span></p> - -<h2 class="nobreak">Lettering Drawings.</h2> - -</div><!--chapter--> - -<p>Lettering is an important part of making drawings, -the object aimed at being to identify any portion -by reference letter or letters; thus in <a href="#Fig239">fig. 239</a> the line -<i>A C</i> describes the -line extending from -<span class="fig239" id="Fig239"><span class="top"><img src="images/illo171.png" alt="Line" /></span> -<span class="bot">Fig. 239.</span></span></p> - -<p>Any information which cannot be expressed in the -drawing is always expressed by lettering, and it is desirable -to confine the lettering of drawings to one or -two standard alphabets that are plain and distinct, and -the principles of which are easily acquired. These conditions -are fulfilled in the Gothic fonts shown on <a href="#Page173">page 173</a>.</p> - -<p>Both letters and figures must be carefully made -and of uniform proportion; it is well to “lay out” -these by regular measurement before permanently -inking them. Letters should not be less than one-eighth -of an inch in height and penciled carefully -before inking.</p> - -<p>On <a href="#Page173">page 173</a> are printed two forms of numerals and -letters of the alphabet; it is recommended that these -be used both for practice in free-hand and for regular -office work.</p> - -<p>For easy reference, letters should not be crowded -nor allowed to interfere with one another; they should -be drawn neatly, avoiding all lines of the drawing; -plain letters are always used on mechanical drawings, -whether for title, scale, reference, etc.</p> - -<p><span class="pagenum" id="Page172">[172]</span></p> - -<p>Arrow-heads, figures and letters should be in black, -and made with a writing pen. A pen with a ball point -is preferable, giving an equal thickness of line, no matter -in which direction the stroke is made.</p> - -<div class="container" id="Fig240"> -<img src="images/illo172.png" alt="Nibs" /> -<p class="caption">Fig. 240.</p> -</div> - -<p>Neat, well-lettered drawings go far towards establishing -a high standing for the aspiring draughtsman. -All lettering should be done free-hand, first with the -pencil, sharpened to a fine round point, and afterwards -written in ink. For this purpose common writing pens -are best to be used; <a href="#Fig240">fig. 240</a> represents the several -numbers of the approved Gillott’s pens adapted to this -purpose.</p> - -<p>In lettering, it is well, for a guide for size and -location, to draw, with a round-pointed pencil, two -horizontal lines just the height the letters are to be; -the letters are also best made with careful use of the -instruments, rather than free-hand.</p> - -<p>In order to letter systematically, it is a good plan -to start with the middle letter of the inscription and -work in both directions; making too prominent letters -should be avoided, plain and distinct letters being most -desirable.</p> - -<p>Finally, with an ordinary writing pen, trace over -the penciling in ink; the pencil guide lines being -erased after the letters are inked in completes the -operation.</p> - -<p><span class="pagenum" id="Page173">[173]</span></p> - -<div class="container"> -<img src="images/illo173.png" alt="Letters and numbers" /> -</div> - -<p><span class="pagenum" id="Page174">[174]</span></p> - -<p>An important matter in connection with lettering -a drawing is the location of the letters; these should -be so placed as not to interfere with the lines of the -drawing and should clearly point out the part intended -to be described. When single letters are used, they -should be inked in before the shade or section lines are -drawn.</p> - -<p><a href="#Fig241">Fig. 241</a> is an example introduced to show the -method of lettering a descriptive mechanical drawing.</p> - -<p>The figure shows a “blow-off valve” of approved -design drawn in section; the letters designate the -several parts; the reading to accompany the lettering -is as follows:</p> - -<p class="hind05"><b>A</b>—Inlet communicating with annular passage (<i>C</i>) to -admit steam, which blows off scale and sediment -from seat (<i>E</i>) before disc (<i>L</i>) comes in contact -with same.</p> - -<p class="hind05"><b>B</b>—Plug to permit passage of rod to clean out blow-off -pipe.</p> - -<p class="hind05"><b>C</b>—Annular steam passage around casing (<i>D</i>) and communicating -with inlet (<i>A</i>).</p> - -<p class="hind05"><b>D</b>—Removable bronze casing, in which plug (<i>L</i>) fits -snugly.</p> - -<p class="hind05"><b>E</b>—Removable bronze seat ring, which also holds casing -(<i>D</i>) in place.</p> - -<p class="hind05"><b>J</b>—Slot in casing (<i>D</i>) arranged to discharge sheet of -steam from <i>C</i>, which, blowing across seat (<i>E</i>), -cleans off scale and sediment before contact with -disc (<i>L</i>).</p> - -<p class="hind05"><b>K</b>—Non-rotating washer to prevent loosening of locknut -(<i>H</i>) when opening valve.</p> - -<p class="hind05"><b>L</b>—Reversible disc, having two Babbitt-metal seating -faces (<i>F</i>) (<i>F</i>).</p> - -<p><span class="pagenum" id="Page175">[175]</span></p> - -<div class="container w30em" id="Fig241"> -<img src="images/illo175.jpg" alt="Valve" /> -<p class="caption">Fig. 241.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page176">[176]</span></p> - -<h2 class="nobreak">Dimensioning Drawings.</h2> - -</div><!--chapter--> - -<p>To “dimension” working drawings is to place -measurements upon the parts represented, to enable -the workman to proceed without measuring the drawing -itself.</p> - -<p>These dimensions should be placed so as not to interfere -with nor crowd the lines of the drawing, nor yet -interfere with one another.</p> - -<p>Arrow-heads are used at the extreme points of -measurement, the figures are generally inserted midway -between the arrows; a dot and dash line reaches -from the figure to the arrow-heads, as shown below.</p> - -<div class="container w20em"> -<img src="images/illo176a.png" alt="Dimension" /> -</div> - -<p>When the dimension is short these lines are -omitted and the dimension is -placed outside the drawing, thus -<img src="images/illo176b.png" class="inline h2em" alt="Dimension" /> -and connected by a curved line; at other times it is -found needful to place arrow-heads outside -the drawing and the measurement inside. -<img src="images/illo176c.png" class="inline h3em" alt="Dimension" /> -</p> - -<p>When the dimension is long and narrow it is -usual to carry the dimensions under the drawing by -dotted and dash lines, as shown below.</p> - -<div class="container w20em"> -<img src="images/illo176d.png" alt="Dimension" /> -</div> - -<p><span class="pagenum" id="Page177">[177]</span></p> - -<p>Arrow-heads and figures should be drawn free-hand -with a common writing pen.</p> - -<p>Usually dimensions are given in inches, up to 24 -inches, as it is found less confusing; for instance, if -written 1′ 1″ it may be mistaken for 11″; if written 13″ -no mistake could be made.</p> - -<div class="container rightfloat w03em"> -<img src="images/illo177a.png" alt="Dimension" /> -</div> - -<p>Again, 1′ 0″ may be mistaken for 10″; if written -12″ it would not; in addition to being more -distinct, it occupies less space on the drawing. In -large measurements there is more room for the -figures, and, therefore, they can be spaced -further apart—in feet and inches.</p> - -<p>All figures should be made of a fairly -large size. Vertical dimensions should read -from the right hand, thus, as shown:</p> - -<p>Measurements of importance, such as -the diameter of a circle, the pitch or distance -apart of rivets and bolts, etc., should -be marked in figures on the drawing. When -rough or unfinished work is mixed with -machined or finished portions, it is usual to mark F, -or “fin.,” after the latter dimension.</p> - -<p>In practice, at times, instead of dimensions reference -letters are used, thus:</p> - -<div class="container w30em"> - -<img src="images/illo177b.png" alt="Machine part" /> - -<div class="centerblock"> - -<p>D = diam. of shaft, 2<sup>1</sup>⁄<sub>2</sub> inches.<br /> -L = length of bearing, 3<sup>3</sup>⁄<sub>4</sub> inches.<br /> -T = thickness of collar, <sup>7</sup>⁄<sub>8</sub> inch.<br /> -d = diam. of collar, 3<sup>1</sup>⁄<sub>2</sub> inches.</p> - -</div><!--centerblock--> - -</div><!--container--> - -<p>Generally it is preferable to give the diameters of -turned and bored work on a section, instead of an end -drawn separately; confusion is sometimes caused by a -number of radial dimensions.</p> - -<p><span class="pagenum" id="Page178">[178]</span></p> - -<p><a href="#Fig243244">Fig. 242 and fig. 243</a> are introduced to show the -principal measurements required in practical work, and -the usual way in which such dimensions are marked -when ordering parts of machinery.</p> - -<p><a href="#Fig243244">Fig. 242</a> is a pedestal, or metal frame; three views -are shown, the center figure being an elevation, the -lower figure is the plan of the base, the upper figure is -a view of the top, on which is bolted the bearing block, -it being on the outside of the center figure. The -essential measurements are marked by letters. <i>H</i> is -the vertical height from base to the seat of bearing -block: <i>L</i> being the length, and <i>W</i> the width of the -base; <i>P</i> is the length between checks, and <i>B</i> the width -of seat for bearing block; <i>C</i> is the distance from center -to center of the holding down bolt holes, and <i>T</i> is the -depth of the holes in the base; <i>K</i> is the distance from -center to center of the bolt holes in the top for bearing -block.</p> - -<p><a href="#Fig243244">Fig. 243</a> is a hanger, or metal bracket, and shows -the center figure or elevation, the plan of the top and -the plan of the seat for bearing block, which is bolted -on the interior of the center figure. <i>H</i> is the vertical -distance from the top to the seat for bearing block; -the other measurements required are marked by letters -similar to <a href="#Fig243244">figure 242</a>.</p> - -<p>Now, one of the important matters in connection -with dimensioning a drawing is the location of the figures. -One rule, whose utility cannot be gainsaid, is -that they should be so located that they can be altered -or erased without damage to the lines of the drawing, -as changes may be necessitated either by original errors -in writing down the figures or by changes in the design -being found desirable during the construction of -the machine.</p> - -<p><span class="pagenum" id="Page179">[179]</span></p> - -<div class="container" id="Fig243244"> - -<img src="images/illo179.png" alt="Pedestal and hanger" /> - -<p class="caption">Fig. 243.—Fig. 244.</p> - -</div><!--container--> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page180">[180]</span></p> - -<h2 class="nobreak">Shading Drawings.</h2> - -</div><!--chapter--> - -<p>To produce an effect, drawings are shaded; that -is, shadow lines about twice the width of the regular -line are drawn according to a recognized rule, which -always represents the same peculiarity of form in the -same way.</p> - -<p>In working drawings light lines only are permitted; -shade lines are wider than the working lines, and in -reading scale measurements the extra thickness of line -would make a difference.</p> - -<p>Instead of representing the shadow as it is really -cast by the object, the edges which cast the shadow -are determined, and all the views are treated as if the -light came from behind and from the left, downwards, -at an angle of 45° to the horizontal line, as shown by -the arrows in <a href="#Fig245248">figs. 245 to 248</a>.</p> - -<div class="container" id="Fig245248"> - -<img src="images/illo180.png" alt="Shading" /> - -<p class="caption">Fig. 245.—Fig. 246.—Fig. 247.—Fig. 248.</p> - -</div> - -<p>The lower and right-hand outlines of projecting -parts will cast shadows, and the student should make -them of extra width.</p> - -<p><span class="pagenum" id="Page181">[181]</span></p> - -<p><a href="#Fig249">Fig. 249</a>: In shading curves, divide the center line as -before (see <a href="#Page146">page 146</a>) and describe circles from center, <i>D</i>; -these lines are not to be shaded in penciling, but when -inking. The figures represent two rings, <i>A</i> and <i>C</i>, and -spaces, <i>B</i> and <i>D</i>. The outside of a surface is shaded -according to circle 1, and the inside surface according -to circle 2. This will give the desired shading, but it -makes a drawing incorrect, and therefore shading is not -used in working drawings.</p> - -<p>This shading is accomplished by inking the circle -first with regular width of line; then with the same radius -remove the point of compasses from the <i>true center</i>, -placing it outside, according to the desired position -of the shaded line, and describe an arc of a circle.</p> - -<p>In <a href="#Fig250">fig. 250</a> divide center line as before; with the -45° triangle or set square, draw through the center the -diagonals shown by dotted lines; and through the -points <i>A</i>, <i>B</i>, <i>C</i>, etc., draw the perpendiculars, cutting -the diagonals; from the points of intersection draw the -horizontal lines, completing the squares.</p> - -<div class="container w25em" id="Fig249"> -<img src="images/illo181a.png" alt="Shading" /> -<p class="caption">Fig. 249.</p> -</div> - -<div class="container w25em" id="Fig250"> -<img src="images/illo181b.png" alt="Shading" /> -<p class="caption">Fig. 250.</p> -</div> - -<p>Now, take a radius -of half an inch, -and in the corner of -each square draw -with the bow-pencil -a circular arc meeting -the pencil lines -exactly; with the -bow-pen <i>ink in the -arcs</i> first, then ink -carefully the lines -joining with the -arcs; all lines must -be of the same -width; put in the -shade on arcs and -lines as in <a href="#Fig249">fig. 249</a>; -and, finally, erase -the pencil lines at -corners, etc.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page182">[182]</span></p> - -<h2 class="nobreak">Section-Lining.</h2> - -</div><!--chapter--> - -<p>Cross-hatching has been defined in the “preliminary -definitions” to drawing; this term represents the -practice of drawing diagonal lines representing the interior -of an object, shown as a piece cut in half or -when a piece is broken away. This is done to make -more of the parts show, or to exhibit more clearly the -nature of the materials; hence section lining and cross-hatching -tell the same thing, <i>i. e.</i>, the drawing of diagonal -lines, usually at an angle of 45°, to show that the -object is broken away and the interior designed to be -represented.</p> - -<div class="container" id="Fig251258"> - -<div class="x-ebookmaker-drop"> - -<div class="split5050"> - -<div class="left5050"> - -<div class="split5050"> - -<div class="left5050"> -<img src="images/illo182a.png" alt="Section" /> -<p class="caption"><span class="material">Cast iron.</span><br /> -Fig. 251.</p> -</div> - -<div class="right5050"> -<img src="images/illo182b.png" alt="Section" /> -<p class="caption"><span class="material">Wrought iron.</span><br /> -Fig. 252.</p> -</div> - -</div><!--split5050--> - -</div><!--left5050--> - -<div class="right5050"> - -<div class="split5050"> - -<div class="left5050"> -<img src="images/illo182c.png" alt="Section" /> -<p class="caption"><span class="material">Steel.</span><br /> -Fig. 253.</p> -</div> - -<div class="right5050"> -<img src="images/illo182d.png" alt="Section" /> -<p class="caption"><span class="material">Composition.</span><br /> -Fig. 254.</p> -</div> - -</div><!--split5050--> - -</div><!--right5050--> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -<div class="split5050"> - -<div class="left5050"> - -<div class="split5050"> - -<div class="left5050"> -<img src="images/illo182e.png" alt="Section" /> -<p class="caption"><span class="material">Vulcanite.</span><br /> -Fig. 255.</p> -</div> - -<div class="right5050"> -<img src="images/illo182f.png" alt="Section" /> -<p class="caption"><span class="material">Wood.</span><br /> -Fig. 256.</p> -</div> - -</div><!--split5050--> - -</div><!--left5050--> - -<div class="right5050"> - -<div class="split5050"> - -<div class="left5050"> -<img src="images/illo182g.png" alt="Section" /> -<p class="caption"><span class="material">Leather.</span><br /> -Fig. 257.</p> -</div> - -<div class="right5050"> -<img src="images/illo182h.png" alt="Section" /> -<p class="caption"><span class="material">Brick.</span><br /> -Fig. 258.</p> -</div> - -</div><!--split5050--> - -</div><!--right5050--> - -<p class="thinline allclear"> </p> - -</div><!--split5050--> - -</div><!--ebookmaker drop--> - -<div class="noscr"> - -<img src="images/illo182a.png" alt="Section" /> -<p class="caption"><span class="material">Cast iron.</span><br /> -Fig. 251.</p> - -<img src="images/illo182b.png" alt="Section" /> -<p class="caption"><span class="material">Wrought iron.</span><br /> -Fig. 252.</p> - -<img src="images/illo182c.png" alt="Section" /> -<p class="caption"><span class="material">Steel.</span><br /> -Fig. 253.</p> - -<img src="images/illo182d.png" alt="Section" /> -<p class="caption"><span class="material">Composition.</span><br /> -Fig. 254.</p> - -<img src="images/illo182e.png" alt="Section" /> -<p class="caption"><span class="material">Vulcanite.</span><br /> -Fig. 255.</p> - -<img src="images/illo182f.png" alt="Section" /> -<p class="caption"><span class="material">Wood.</span><br /> -Fig. 256.</p> - -<img src="images/illo182g.png" alt="Section" /> -<p class="caption"><span class="material">Leather.</span><br /> -Fig. 257.</p> - -<img src="images/illo182h.png" alt="Section" /> -<p class="caption"><span class="material">Brick.</span><br /> -Fig. 258.</p> - -</div><!--noscr--> - -</div><!--container--> - -<div class="container leftfloat w20em" id="Fig259"> -<img src="images/illo183a.png" alt="Cog wheel" /> -<p class="caption">Fig. 259.</p> -</div> - -<p><a href="#Fig251258">Figs. 251 to 258</a>, inclusive, show the section lining -and cross-hatching by which it is customary to represent -the various materials entering into a construction.</p> - -<p><span class="pagenum" id="Page183">[183]</span></p> - -<p>In <a href="#Fig259">fig. 259</a> is outlined a -representation of a section of -a cog-wheel; section 1 being -the wood cogs; 2, the iron -wheel, and 3 the wedges at -the root of the gear. It would -be impossible to convey the -same ideas by ordinary plan -or elevation drawing; all the objects on the same page -are more clearly represented by the use of section -lines or cross-hatching.</p> - -<p>Sectioning is executed by drawing a series of parallel -lines about <sup>3</sup>⁄<sub>32</sub> inches apart. Lay the 45° triangle -on the upper edge of the T-square and draw the top-most -line of the sectioning. Then slide the triangle -along the T-square for each successive line. The sectioning -should be inked in without previous penciling -and the lines should be finer than the lines of the general -drawing.</p> - -<p>Various devices are in use for mechanically equalizing -the distances in section lining, but the trained -eye is the most practical method. When two abutting -pieces are sectioned, the section lining on one piece -slants in an opposite direction to that on the other.</p> - -<p>To draw an object to be sectioned on both sides -of its center line, only one side is sectioned, while the -other side is drawn in full.</p> - -<p>Sections are necessary in nearly all machine drawings; -they are usually taken horizontally or vertically, -but they may be taken in any direction; the position -of a section should be shown by a line upon the object; -this line is called the cutting plane.</p> - -<p>In <a href="#Fig261">fig. 261</a> is shown the hub of a wheel, it is also a -sample of work for practice.</p> - -<p><span class="pagenum" id="Page184">[184]</span></p> - -<div class="container w30em" id="Fig260"> -<img src="images/illo183b.jpg" alt="Wheel hub" /> -<p class="caption">Fig. 260.</p> -</div> - -<div class="container w30em" id="Fig261"> -<img src="images/illo184.png" alt="Hatching" /> -<p class="caption">Fig. 261.</p> -</div> - -<p><a href="#Fig260">Fig. 260</a> shows the mode of representing two -different materials in one plane, or a section may be -represented by the darker portion, and the lighter -shaded portion being a surface resting on the section.</p> - -<p><a href="#Fig261">Fig. 261</a> shows the section of a shaft surrounded -by the surface of a wheel.</p> - -<h3>TINTS AND COLORS.</h3> - -<p>For special purposes of illustration drawings are -made which must be tinted. In such cases the paper -must be expanded and stretched evenly all over its -surface; otherwise when the moist tint is applied the -paper will wrinkle and get out of shape; to do this -cut the paper at least half an inch less in size than the -drawing board; lay the paper face down, turn up a -margin or edge of about three-fourths of an inch all -round, then dampen the paper with a sponge and clean -water; allow it to soak for a few minutes until it is -evenly dampened or moistened all over, turn the paper -upside down (face up).</p> - -<p>Apply strong paste to the under side of the margin -all round; rub down, on the drawing-board, working -from the center of the board outwards so as to exclude -the air and prevent creases or furrows. The board is -then inclined and left to dry slowly; make sure that the -paper is all well pasted and every part of the edges -attached to the board.</p> - -<p>If tracings are required to be tinted or shaded, -the color may be applied before the tracing is cut off, -or what is more usual, the color may be applied on the -back of the tracing; then there is no liability to wash -out the lines.</p> - -<p><span class="pagenum" id="Page185">[185]</span></p> - -<p>Mechanical drawings are seldom tinted, but are -mainly produced in India ink. Where, however, a fine -effect is desired, working drawings are colored, so as to -show at a glance the material of which the different -parts are to be made.</p> - -<p>The colors required are few but should be of the -best quality. Besides India ink the following water-colors -are generally used:</p> - -<p>1, Neutral-tint. 2, Prussian Blue. 3, Chrome -Yellow. 4, Gamboge. 5, Raw Sienna. 6, Carmine. -7, Vermillion. 8, Venetian Red. 9, Sepia. 10, Indigo. -These come in hard cakes.</p> - -<p>Certain colors and tints represent different metals -and materials as follows:</p> - -<p>Wrought Iron—Prussian Blue.</p> - -<p>Steel—Carmine and Prussian Blue, mixed to give -a purple shade.</p> - -<p>Steel Casting—Same as the above darkened by -Venetian Red.</p> - -<p>Cast-Iron—Neutral Tint made of India Ink, indigo, -mixed with a little carmine.</p> - -<p>Brass—Gamboge or Chrome Yellow.</p> - -<p>Babbitt—Emerald Green; sometimes light mixture -of India Ink.</p> - -<p>Copper—Purple Lake.</p> - -<p>It is sometimes found necessary to prepare a highly -finished and shaded drawing of the work in hand. -Such elaborations, in fact, are much admired by the -uninitiated, although the complete shading of the -drawing is no criterion as to the scientific value of the -machine. An illustration of this is told in the note.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—A consulting engineer had to lay before a board of -directors plans of horizontal engines for their consideration. One -of these drawings was of a very superior machine, but being only -depicted lineally was at once rejected by them, for a highly -finished representation of a very inferior apparatus. The engineer, -wishing to induce the board to decide for the best, suggested that -the matter should be postponed to a future day, and in the meantime -had the drawing of the superior machine highly colored and -finished. At the next meeting the directors unanimously decided -that this was the very one which they preferred and had chosen.</p> - -</div><!--note--> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page186">[186]</span></p> - -<h2 class="nobreak">Reproducing Drawings.</h2> - -</div><!--chapter--> - -<p>When once finished, one or more copies of drawings -are frequently required; these are produced, 1, by -blue printing, as described before; 2, by tracing. A -tracing is a mechanical copy of a design or drawing, -made by reproducing its lines as seen through a transparent -medium—as tracing-cloth or tracing-paper.</p> - -<p>Tracing-cloth is a thin linen fabric, coated with -size; this is called <i>tracing-lines</i>; <i>tracing-paper</i> is so -prepared as to be transparent, so that it will receive -marks either in pencil or with pen and ink.</p> - -<p>Tracing-cloth must be fastened to the board, over -the drawing, by pins or other tacks; moisture or dampness -should be carefully avoided and the drawing done -on the smooth side of the cloth.</p> - -<p>When tracing cloth will not take ink readily a -small quantity of pounce may be applied to the surface -of the cloth and distributed evenly with a piece -of cotton waste, chamois, or similar material, but the -pounce should be thoroughly removed—by washing—before -applying the ink.</p> - -<p>In making tracings the same order is followed as -described under the section “Inking”—to repeat: -1, ink in the small circles and curves; 2, ink in the -larger circles and curves; 3, then all the horizontal -lines, beginning at the top of the drawing and working -downward; 4, next ink in all the vertical lines, commencing -at the left and moving back to the right; -5, draw in the oblique lines; 6, all the center lines red -(carmine), and dimension and reference lines in blue -(Prussian blue) or <i>vice versa</i>. The figuring and lettering -should always be done with India ink, thoroughly -black.</p> - -<p><span class="pagenum" id="Page187">[187]</span></p> - -<h3>BLUE PRINTING.</h3> - -<p>Copies of drawings or parts representing details -and measurements are frequently needed for the office, -pattern shop, machine and blacksmith shop, etc. These -copies are best made by printing on sensitized or -specially prepared paper, from tracings drawn on transparent -cloth or paper, as hereabove described. The -original design may be guarded with the utmost care -for long preservation, but the blue prints, so called, are -for ready reference and use without much regard to -the length of time they are to be in existence.</p> - -<p>The usual practice is to carefully trace from the -drawing on transparent cloth or paper an exact reproduction -of it, filling in all detail lettering and sizes or -figured dimensions.</p> - -<p>This tracing is fixed in a frame similar to a picture -frame, with the side on which the drawing is made -next to the glass: 1, place the sensitized side of the -paper (which has been prepared previously) against the -back of the tracing; 2, fix soft padding against the -back of the paper and fasten it up so that both paper -and tracing are compressed firmly against the glass, -permitting no creases or air spaces between them.</p> - -<div class="container w40em" id="Fig262"> -<img src="images/illo187.jpg" alt="Blue print" /> -<p class="caption">Fig. 262.</p> -</div> - -<p>This should be done in a darkened room; 3, expose -for three to six minutes, according to the intensity -of the sun; 4, take the sensitized paper out of the<span class="pagenum" id="Page188">[188]</span> -frame and quickly wash well in clean running cool -water, and the drawing will appear in white lines on -blue ground; 5, hang the print up by one edge so that -the water will run off and the print will soon dry and -be ready for use.</p> - -<h3>TEST-PIECES.</h3> - -<p>To make good blueprints, being guided only by -the appearance of the exposed edge of sensitized -paper, requires considerable experience. Very often, -especially on a cloudy day, the edge looks just about -right, but when taken out of the frame and given a -rinsing, it is only to find that the print looks pale -because it should have been allowed to remain exposed -for a longer period.</p> - -<p>Now simply take a small test-piece of the same -paper (say about 4 inches square) and a piece of -tracing cloth with several lines on its surface and -lay these small pieces out at the same time the real -print is being exposed, and cover these samples -with a piece of glass about 4 inches square. As a -general rule, we can find a place on top of the frame -for the testing-piece, and by having a small dish of -water at hand for testing the print by tearing off a -small bit and washing same to note its appearance, -the novice can get just as good results as the experienced -hand without danger of failure.</p> - -<h3>BLACK PROCESS COPYING.</h3> - -<p>This is accomplished by specially sensitized paper -by which a fac-simile of the original drawing can be -made; that is, black lines upon white ground. It also -avoids the objection to the blue print paper of shaded -drawings which show light and shade reversed.</p> - -<p>The prints made by the process are said to be -absolutely permanent and can be altered, added to or -colored the same as original drawings.</p> - -<p>The sensitized paper is sold ready for use, but it -can be prepared by dissolving two ounces of citrate of -iron and ammonium in eight ounces of soft water; -keep in a dark bottle, also, one and one-third ounces of -red prussiate of potash in eight ounces of water; keep -in another dark bottle; when about to use mix an -equal quantity of each in a cup and apply in a dark -room with a soft brush or sponge to one side of white -rag paper, similar to envelope paper, let it dry and put -away in a dark place until required for use.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page189">[189]</span></p> - -<div class="container w30em"> -<img src="images/illo189.png" alt="DRAWING OFFICE RULES" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page190">[190-<br />191]</span><a id="Page191"></a></p> - -<h2 class="nobreak" id="FNanchor1">Drawing Office Rules.<a href="#Footnote1" class="fnanchor">[1]</a></h2> - -</div><!--chapter--> - -<div class="footnote"> - -<p><a id="Footnote1"></a><a href="#FNanchor1"><span class="label">[1]</span></a> -<span class="smcap">Note.</span>—A. W. Robinson, M.E., Montreal, must have all -credit for these admirable rules and regulations. They bring into -a single focus the whole science and art of mechanical drawing.</p> - -</div><!--footnote--> - -<p>There are drawing offices where from ten to nearly one hundred people are busily employed in making -new plans and sketches by the hundreds, and where thousands of completed drawings are filed for reference -or for changes, as these are needed in the shop management.</p> - -<p>To be introduced for the first time into such a company is a trial for the “new man” both of nerve and -manners, and a test as well of skill; nothing helps more at such a time than an acquaintance with the rules -and routine of the office, for the old saying holds good in a drawing office, of “doing in Rome as the Romans -do.” The author of this book has felt this strangeness in a new position and so adds the following model-rules -for the guidance of the student when first entering a regular position in an office where many are employed -and where success depends upon a systematic ordering of the work in hand.</p> - -<h3>SIZE OF DRAWINGS.</h3> - -<p>1. The standard size shall be 23 inches by 36 -inches, subdivided into half, quarter and eighth sheets.</p> - -<p>2. Full-size drawings shall be reserved, as far as -possible, for general views and parts not capable of -being shown on smaller sheets.</p> - -<p>3. All shop detail shall, as far as possible, be -shown on quarter and eighth sheets.</p> - -<h3>CHARACTER OF DRAWINGS.</h3> - -<p>4. Detail drawings shall, as far as possible, classify -the different kinds of works, such as castings, forgings, -shafts, levers, piping, etc. Different kinds of work -shall not be shown on the same detail drawing.</p> - -<p><span class="pagenum" id="Page192">[192]</span></p> - -<p>5. All shop drawings liable to repetition shall be -traced and blue-printed. All temporary details, requiring -only one copy, may be made on sketch sheets -and press copied.</p> - -<p>6. A shop drawing is to be considered as an order -or instruction to the shop, and not merely as a statement -or illustration. For this purpose it must convey -clearly and distinctly all the information necessary -to make the article.</p> - -<p>7. Every dimension necessary to the execution -of the work is to be clearly stated by figures on the -drawing, so that no measurements need to be taken in -the shop by scale. All measurements to be given with -reference to the base or starting point from which the -work should be laid out, and also with reference to -center lines.</p> - -<p>8. All figured dimensions on drawings to be -plain, round vertical figures, not less than one-eighth -inch high, and formed by a line of uniform width and -sufficiently heavy to insure printing well. No thin, -sloping, or doubtful figures, or diagonal-barred fractions -will be tolerated. All figured dimensions below two -feet to be expressed in inches.</p> - -<p>9. All center lines to be alternate dot and dash -in fine black line. All dimension lines to be double -dot and dash, with a central space for the figure, and of -such strength as to show on blue-print more faintly than -lines of drawing. Lines of drawing to be bold and -clearly defined in proportion to the scale, and may be -shade-lined by making the right-hand and bottom lines -heavier. No ornamental shading or other “frills” -allowed on shop drawings.</p> - -<p>10. Every drawing, whether whole or half-sheet, -shall have the title, date, scale and number of the sheet -stamped in lower right-hand corner, and the quarter -and eighth sheets printed on top.</p> - -<p>11. The name of the drawing, as given in the -title, is invariably to consist of two divisions in one -line separated by a hyphen. The first division is to -state the general name of the thing or machine, and<span class="pagenum" id="Page193">[193]</span> -the second name is to clearly designate the part or -parts represented (or if a general view should so state). -The wording of titles should be submitted to the chief -engineer or head draughtsman for approval.</p> - -<p>12. Each drawing shall bear the name of the -draughtsman and examiner, the surname being used -without initials.</p> - -<p>13. Drawings of piping details shall be made in -diagram form, using standard symbols.</p> - -<p>14. All detail parts for standard or repetition -work shall be shown unassembled as far as possible.</p> - -<h3>DRAWING SYMBOLS.</h3> - -<p>15. Detail shop drawings should state:</p> - -<p>(a) The pattern number of every casting in plain -figures of larger size than the dimension figures.</p> - -<p>(b) The material of which the parts are made, -using symbols as follows: C.I.—Cast iron. W.I.—Wrought -iron. M.S.—Machinery steel. H.S.—Hammered -steel. Bs.—Brass. Bbt.—Babbitt. Bz.—Bronze. -C.R.S.—Cold rolled steel.</p> - -<p>Other materials write full name.</p> - -<p>(c) Finished surfaces will be indicated by “f” -written on the line or surface to be finished. When -not so marked it is understood that the part is to be -left black or rough. In cases where finish might be -presumed but not required, follow the figured dimensions -by the word “cast,” if a casting, and “rough,” if -a forging.</p> - -<h3>STANDARDS.</h3> - -<p>16. The following standards shall be strictly -adhered to as given in the tables noted:</p> - -<p>(1.) Table of standard diameters of shafting and -key seats.</p> - -<p>(2.) Table of standard stock sizes of rounds.</p> - -<p>(3.) Table of standard stock sizes of flat steel.</p> - -<p>(4.) Table of standard clearance fits.</p> - -<p>(5.) Table of standard symbols for notation of -riveting.</p> - -<p>(6.) Table of standard symbols for pipe fittings.</p> - -<p>Also such other standards as may be adopted from -time to time.</p> - -<p><span class="pagenum" id="Page194">[194]</span></p> - -<h3>NUMBERING OF DRAWINGS.</h3> - -<p>17. Drawers and filing cases shall be numbered -consecutively. Drawers shall contain 100 sheets each, -and filing cases 200 sheets each, and to be fully indexed. -Drawings shall be numbered by a number indicating -both drawer number and serial number in the -drawer—thus, 7,604 is the fourth sheet in drawer 76, etc.</p> - -<p>18. Drawing numbers shall be checked off the -index as required, and the index posted up in uniform -handwriting by the clerk.</p> - -<p>19. Standard size drawings shall be kept in -drawers and quarter and eighth sheets in filing cases. -All drawings shall be indexed by an index sheet kept -in each drawer or case.</p> - -<h3>CHECKING.</h3> - -<p>20. All drawings must be approved before being -traced. When tracing is completed it will be given -immediately to the chief draughtsman, who will have -a preliminary print made and carefully checked, before -being used.</p> - -<h3>PATTERNS.</h3> - -<p>21. All patterns shall bear the number of the -drawing on which they are first detailed, followed by a -serial letter, according to the number of patterns on -the drawing.</p> - -<p>22. Standard patterns used repeatedly and liable -to be ordered from in repairs must not be changed. -Other patterns may only be changed when absolutely -necessary and by order. When so changed they will -bear the original number and letter, followed by A for -the first change, B for the second change, and so on -thus: 4860 AB is the second change in pattern 4860 A.</p> - -<h3>SKETCH BOOKS.</h3> - -<p>23. Each draughtsman will be supplied with a -sketch book by the company, in which he shall make -all his notes, calculations and data referring to his -work, and under no circumstances shall notes of value -be made on loose sheets. Each entry should invariably -be commenced with the subject and date, and full<span class="pagenum" id="Page195">[195]</span> -notes made of data on which the calculations were -based, and the results obtained clearly stated. These -books are to remain the property of the company.</p> - -<h3>IN GENERAL.</h3> - -<p>24. Changes in drawings, sketches or order lists -issued to the shop shall only be made when authorized -by the chief engineer, or, in his absence, by the chief -draughtsman, and when so authorized shall be made by -the order clerk.</p> - -<p>25. The names of all similar parts in order lists -and drawings are to be uniform.</p> - -<p>26. Tracings must be kept in safe, for blue-printing -purposes only. Office copies of blue-prints must -be used for references.</p> - -<p>27. No drawing, print or photograph shall be -taken from office without permission.</p> - -<h3>NUMBERING WORKING DRAWINGS.</h3> - -<p>There are a great many different systems used in -indexing drawings, most of which have some good -points, but very few are sufficiently elastic to cover a -wide field. A plan based upon the decimal system of -notation is very simple, and, as there is no practical -limit to the number of subdivisions, it can be expanded -indefinitely. Following are the main outline -features of the system as adapted to the needs of -drawing offices belonging to large works.</p> - -<p>The main division numbers, 000, 100, 200, 300, etc., -are used respectively for all plans and general sheets -referring to the division concerned. 100 includes -general plans covering more than one department, -and all small-scale plans with cross references to departments -covered.</p> - -<p>The class or tens divisions contain general -drawings of the subdivisions, the subclasses or units -divisions being limited to details only. Further subdivisions -would probably be necessary in some cases. -A card index with cross references and written by -someone who knew what to do is an essential part -of the system.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page196">[196-<br />197]</span><a id="Page197"></a></p> - -<div class="container w30em"> -<img src="images/illo197.png" alt="GEARING AND DESIGN" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page198">[198]</span></p> - -<div class="container" id="Fig263"> -<img src="images/illo198.png" alt="Gears" /> -<p class="caption">Fig. 263.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page199">[199]</span></p> - -<h2 class="nobreak">Gearing.</h2> - -</div><!--chapter--> - -<p>Under this heading the author has grouped some information relating to a subject of wide interest and one -sure to interest a student of mechanical drawing.</p> - -<p>The diagrams are intended for exercises in drawing, <i>i. e.</i>, to be redrawn as parts of practice; the text is to be -studied not only for the good to be gained from the study of gearing, but as an example of the way in which -written or printed descriptions are necessary to explain a subject illustrated by drawings.</p> - -<p><i>A gear</i> is primarily a toothed wheel; gearing is a -train of toothed wheels for transmitting motions; there -are two chief sorts of toothed gearing, viz., spur gearing -and bevel gearing.</p> - -<p><i>A spur wheel</i> has teeth around the edge pointing -to the center; commencing at the center, a spur wheel -may be said to consist of a hole, square, octagonal or -round, for its axle or shaft; a hub; the web, body or -arms; a rim, and the teeth; see <a href="#Fig263">fig. 263</a>.</p> - -<p><i>A spur wheel</i> has teeth on its circumference which -run parallel to its shaft; wheels as shown in <a href="#Fig271">fig. 271</a> are -termed <i>helical wheels</i>; these are similar to spur wheels -except their teeth are arranged upon different angles -to the shaft.</p> - -<p><i>A bevel</i> is a slant or inclination of a surface from a -right line, hence a bevel wheel is one whose teeth stand -beveling or at an oblique angle to the shaft, or towards -the center; see <a href="#Fig267">fig. 267</a>.</p> - -<p><i>Miter wheels</i> are bevel wheels of the same size, -working at right angles with one another; see <a href="#Fig268">fig. 268</a>.</p> - -<p><i>The diameter of both spur and bevel wheels</i> is -measured and calculated neither from the outside nor -from the bottom of the teeth, but on the pitch circle. -When we speak of the diameter of a spur or bevel<span class="pagenum" id="Page200">[200]</span> -wheel, we mean the diameter of the pitch circle, without -any reference to the form of tooth.</p> - -<p><i>The addendum circle</i> of a toothed wheel is as -shown in illustration, <a href="#Fig264">fig. 264</a>; <i>addendum</i> means “something -added,” and, as shown in the figure, it is the part -added beyond the pitch “line” or circle.</p> - -<div class="container w40em" id="Fig264"> -<img src="images/illo200.png" alt="Definitions" /> -<p class="caption">Fig. 264.</p> -</div> - -<p><i>The pitch line</i> is the most important one in gearing; -the “pitch line” or “pitch circle” is supposed to be -the working circle. This is shown in P—P in <a href="#Fig274">fig. 274</a>.</p> - -<p><i>The periphery</i> of a wheel is the extreme circumference, -as N in <a href="#Fig274">fig. 274</a>.</p> - -<p>All parts of gear-wheels consist of portions, to -which have been given generally accepted names. -<a href="#Fig264">Fig. 264</a> shows the “addendum circle” and the “pitch -line” as marked. The teeth and rim are shown in -white, and the other portions are indicated by the names.</p> - -<p><i>The circular pitch line</i>, as opposed to the diametral -pitch, is the same as the pitch circle. It is a line which -bisects all the teeth of a toothed wheel.</p> - -<p><i>The rolling circle</i> is the same as the circular -pitch line.</p> - -<p><i>Diametral</i> means pertaining to a diameter or the -length of a diameter; hence a diametral pitch is a -system of measures or enumeration based upon the -diameter instead of the circular pitch line; it is used -very generally in spacing for fine tooth gear. Wheels -of this description usually have their teeth cut in a -gear-cutting machine, <i>i. e.</i>, medium and fine tooth -gears.</p> - -<p><span class="pagenum" id="Page201">[201]</span></p> - -<div class="container rightfloat w15em" id="Fig265"> -<img src="images/illo201.png" alt="Cog wheel" /> -<p class="caption">Fig. 265.</p> -</div> - -<p><i>A cog wheel</i> is the general name for any wheel -which has a number of cogs placed around its circumference.</p> - -<p>When the teeth of a wheel are -made of the same material and -formed of the same piece as the -body of the wheel, they are called -<i>teeth</i>; when they are made of wood -or some other material and fixed to -the circumference of the wheel, they -are called <i>cogs</i>; see <a href="#Fig265">fig. 265</a>.</p> - -<p><i>A pinion</i> is a small wheel. When two toothed -wheels act upon one another, the smaller is generally -called the pinion. The terms <i>trundle</i> and <i>lantern</i> are -applied to small wheels having cylindrical bars instead -of teeth. The teeth in pinions are sometimes termed -<i>leaves</i>; in a trundle, <i>staves</i>. See <a href="#Fig273">fig. 273</a>.</p> - -<p>The wheel which acts is called a <i>leader</i> or <i>driver</i>; -and the wheel which is acted upon by the former is -called a <i>follower</i> or the <i>driven</i>. When a screw or <i>worm</i> -revolves in the teeth of a wheel, the latter is termed a -<i>worm wheel</i> or <i>worm gear</i>; see <a href="#Fig270">fig. 270</a>. When a -pinion acts with a rack having teeth, we speak of <i>rack</i> -and pinion. When the teeth are on the inside of the -rim, and not on the periphery, the wheel is termed an -<i>internal gear</i>; see <a href="#Fig272">fig. 272</a>.</p> - -<p>Two wheels acting upon one another in the same -plane are called <i>spur gear</i>; the teeth are parallel with -the axis. When wheels act at an angle, they are -called <i>bevel gear</i>.</p> - -<p><i>Friction gear-wheels</i> are those which communicate -motion one to the other by the simple contact of -their surfaces.</p> - -<p>In frictional gearing the wheels are toothless and -one wheel drives the other by means of the friction -between the two surfaces which are pressed together.</p> - -<p>Grooved friction wheels are used to give greater -cohesion than can be obtained by the plain surface.</p> - -<p><span class="pagenum" id="Page202">[202]</span></p> - -<p><a href="#Fig263">Fig. 263</a> shows a pair of spur-wheels in -gear. The dotted circles which meet are -the rolling circles, called the “pitch line” -or “pitch circle.”</p> - -<div class="container w30em" id="Fig266"> -<img src="images/illo202.png" alt="Spur mortise wheel" /> -<p class="caption">Fig. 266.</p> -</div> - -<p>A spur mortise wheel is similarly -shown in <a href="#Fig266">fig. 266</a>; it is very like in appearance -to a spur wheel; it differs essentially -in that the teeth are separate cogs, -fixed in singly to the rim; see also <a href="#Fig265">fig. 265</a>, -<a href="#Page201">page 201</a>.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—The teeth of spur wheels cast from a -pattern must of necessity be larger at one side than -at the other, because the teeth must have taper to -permit the extraction of the pattern from the -mould; therefore, in fixing wheels to gear, the -large side of one should meet the smaller side of -the other; should the two large sides come together -the teeth will meet only at the large side, -and the teeth will probably break away from the -excessive strain on that point.</p> - -</div><!--note--> - -<p><span class="pagenum" id="Page203">[203]</span></p> - -<p><i>Skew gearing</i> are bevel wheels working out of -center; the teeth do not form radial lines from the -wheel center.</p> - -<p><a href="#Fig267">Fig. 267</a> shows a pair of bevel wheels in gear as -described on <a href="#Page199">page 199</a>. A bevel mortise wheel, <i>i. e.</i>, -one having cogs inserted in its rim instead of teeth.</p> - -<div class="container" id="Fig267"> -<img src="images/illo203.png" alt="Bevel wheels" /> -<p class="caption">Fig. 267.</p> -</div> - -<p><span class="pagenum" id="Page204">[204]</span></p> - -<p>A bevel wheel and pinion must be made to suit -one another by both having teeth forming together an -angle of 90°, therefore they are pairs, or proportioned -in the number of teeth one to the other. Any other -proportion used would not exactly gear and would be -termed a “bastard” gear.</p> - -<div class="container w30em" id="Fig268"> -<img src="images/illo204.png" alt="Miter wheels" /> -<p class="caption">Fig. 268.</p> -</div> - -<p><a href="#Fig268">Fig. 268</a> represents a pair of miter wheels in gear; -it will be noted that the shafts, when connected, will -be at right angles to each other, the wheels being in -all particulars of the same dimensions; the figure -answers the purpose of a much longer description, if -given in words.</p> - -<p>A miter-wheel can easily be known by putting -a square upon the face of the teeth, which are always -at an angle of 45° with one another, irrespective -of size.</p> - -<p><i>A miter-wheel</i> is a particular kind of bevel-wheel, -the bevel being limited to an angle of 45° in each -wheel.</p> - -<p>The curve of the teeth in bevel-gears, when correctly -formed, changes constantly from one end of the -tooth to the other, therefore bevel-gears whose teeth -are produced with a forced cutter are not theoretically -correct.</p> - -<p><span class="pagenum" id="Page205">[205]</span></p> - -<p><a href="#Fig269">Fig. 269</a> -represents a -rack and pinion: -the teeth -in this form of -gear are shaped -similarly to -those in the spur -wheel, shown on -<a href="#Page198">page 198</a>, with -the difference -that the teeth -of one are on a circle and -on the rack are made on -a straight line.</p> - -<div class="container" id="Fig269"> -<img src="images/illo205.png" alt="Rack and pinion" /> -<p class="caption">Fig. 269.</p> -</div> - -<p>A flange or addition -to the end of a tooth and -the rim connecting them -together is used to -strengthen the teeth. This -extends from the root to -pitch line when the wheel -and pinion are both -flanged: if only one is -flanged it extends from -the root to the addendum.</p> - -<p><span class="pagenum" id="Page206">[206]</span></p> - -<div class="container w40em" id="Fig270"> -<img src="images/illo206.png" alt="Worm and worm wheel" /> -<p class="caption">Fig. 270.</p> -</div> - -<p><a href="#Fig270">Fig. 270</a> illustrates a worm and -a worm wheel, sometimes called -screw gears. This is a slow but -powerful method of transmitting -power, one revolution of the worm -only moving the wheel the distance -of one tooth and space.</p> - -<p><i>A worm gear</i> is a spur wheel -with teeth at an angle to the axis, -so as to work with a worm which -is a <i>screw</i>, or has teeth shaped in -the form of a spiral wound round -its circumference; the screw or -worm is called an endless screw, -because it never comes to a stopping -place in the circumference of -the wheel.</p> - -<p><span class="pagenum" id="Page207">[207]</span></p> - -<div class="container" id="Fig271"> -<img src="images/illo207a.jpg" alt="Helical gear" /> -<p class="caption">Fig. 271.</p> -</div> - -<p><a href="#Fig271">Fig. 271</a> represents a gear with helical teeth. It is similar to a spur wheel, and is used -in place of same in heavy and slow moving machinery, the formation of teeth preventing—in -large measure—the jar or concussion noticeable in common spur gears.</p> - -<p>In recent years the speed at which gearing is run has been greatly increased. A -striking instance is that of a pair of <i>cast-iron</i> helical wheels, 6 ft. 3 in. diameter, 12 in. -wide, making 220 revolutions -per minute, the speed of the -pitch line being 4,319 feet per -minute; these wheels are running -continuously and with -little noise. There is also a <i>cut</i> -gear in a mill in Massachusetts, -30 feet in diameter, and the -speed of pitch line is 4,670 feet -per minute.</p> - -<div class="container w30em" id="Fig272"> -<img src="images/illo207b.png" alt="Annular gear" /> -<p class="caption">Fig. 272.</p> -</div> - -<p><i>An internal or annular gear wheel</i> is one in which the faces of the teeth are within -and the flank without the pitch circle, hence the pinion operates within the wheel. -See <a href="#Fig272">fig. 272</a>.</p> - -<p>In internal geared wheels there is almost an entire absence of friction and consequent -wear of the teeth, as compared to ordinary spur gearing.</p> - -<p><span class="pagenum" id="Page208">[208]</span></p> - -<p><a href="#Fig273">Fig. 273</a> shows a <i>crown-wheel</i> which has pin teeth -which are fixed by one end only, on its side face and -gear into a trundle wheel.</p> - -<div class="container w40em" id="Fig273"> -<img src="images/illo208.png" alt="Trundle wheel" /> -<p class="caption">Fig. 273.</p> -</div> - -<p><i>A trundle wheel</i> has no teeth, properly speaking. -Instead of teeth, it has pins as shown on illustration, -<a href="#Fig273">fig. 273</a>, arranged like the rungs of a ladder between -two walls. See <a href="#Page201">page 201</a>.</p> - -<p><i>Trains of Gears.</i>—When two wheels mesh—that -is, engage with each other—as in <a href="#Fig263">fig. 263</a>, one axle -revolves in the opposite direction to the other; but -when internal gears mesh as shown in <a href="#Fig272">fig. 272</a>, the shafts -revolve in the same direction; three or more gears running -together are often called <i>a train of gears</i>.</p> - -<p>Maximum speed of gears under favorable conditions -for safety is <span class="nowrap">comparatively—</span></p> - -<table class="gears" summary="Gear speed"> - -<tr> -<td class="wheel">Ordinary cast-iron wheels,</td> -<td class="speed">1,800</td> -<td class="unit">feet per minute.</td> -</tr> - -<tr> -<td class="wheel">Helical cast-iron wheels,</td> -<td class="speed">2,400</td> -<td class="unit">feet per minute.</td> -</tr> - -<tr> -<td class="wheel">Mortise wood cog wheels,</td> -<td class="speed">2,400</td> -<td class="unit">feet per minute.</td> -</tr> - -<tr> -<td class="wheel">Ordinary cast-steel wheels,</td> -<td class="speed">2,600</td> -<td class="unit">feet per minute.</td> -</tr> - -<tr> -<td class="wheel">Helical cast-steel wheels,</td> -<td class="speed">3,000</td> -<td class="unit">feet per minute.</td> -</tr> - -<tr> -<td class="wheel">Cast-iron machine cut wheels,</td> -<td class="speed">3,000</td> -<td class="unit">feet per minute.</td> -</tr> - -</table> - -<p>It is not, however, advisable to run gears at their -maximum speeds, as great noise and vibration are -caused.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page209">[209]</span></p> - -<h2 class="nobreak">Designing Gears.</h2> - -</div><!--chapter--> - -<p>This section is introduced into the work for a double purpose; 1, as an exercise in drawing; 2, as a study in -accurate measurements. It is a sample of the work that the advanced student in mechanical drawing will be -confronted with as he puts in practice the theory of the art of drawing.</p> - -<p>Some sample rules are given in the following pages to aid in calculations relating to gears, and still others are -given under the <a href="#Page269">section</a> “Useful Rules and Tables” at the end of the volume; these are to be carefully studied.</p> - -<p>To accurately divide the pitch circle of a gear -wheel by hand requires both patience and skill. On -the accuracy of spacing lies the essential requisite of a -good gear wheel.</p> - -<p>The drawing in plate, <a href="#Fig274">fig. 274</a>, illustrates a pair -of spur wheels, shown in gear, the office instructions -for which being:</p> - -<p>“Required, <i>a detail plan</i> of a pair of spur wheels; -dimensions: wheel, 76 teeth, 3<sup>1</sup>⁄<sub>2</sub> inches pitch, 7-inch -eye, 6 arms; pinion, 19 teeth; scale, 1<sup>1</sup>⁄<sub>2</sub> inches = 1 -foot.”</p> - -<p>The drawing, as illustrated, is the result of the -above instructions, all pencil lines being removed, and -this result is worked out as follows:</p> - -<p>76 teeth × 3<sup>1</sup>⁄<sub>2</sub> inches, pitch = 266 inches in circum. -= 7 ft. 0<sup>11</sup>⁄<sub>16</sub> in. diam. = 3 ft. 6<sup>11</sup>⁄<sub>32</sub> in. radius; with this -measurement as represented on scale, draw line <i>P P</i> on -drawing. This is called the pitch line.</p> - -<p>Draw next diameter line, produce or extend this -diameter line for pinion, and with radius of 10<sup>19</sup>⁄<sub>32</sub> (19 -teeth × 3<sup>1</sup>⁄<sub>2</sub>) from pitch line of wheel, draw pitch line of -pinion.</p> - -<p><span class="pagenum" id="Page210">[210]</span></p> - -<p>Take any point in this pitch line of wheel, mark -off 3<sup>1</sup>⁄<sub>2</sub> inches as represented on scale, mark this around -the pitch line, it will be the center of each of the 76 -teeth; then the breadth of thickness of each tooth -(= pitch × 0.475) must be marked from these centers, -then mark from <i>P L</i>, length of tooth to point (= pitch -× 0.35) and <i>P L</i> to root (= pitch × 0.4), draw circles for -outside of teeth <i>N</i> and root of tooth <i>O</i>; now with -compass set to the pitch (3<sup>1</sup>⁄<sub>2</sub>) of the wheel, draw the -outer portion from pitch line of tooth.</p> - -<p>The radius will center in the pitch line of next -tooth where thickness of tooth has been marked; after -finishing outer portion of both sides of teeth, set the -compass from <i>center</i> of tooth with radius to the thickness -marked on pitch line and draw the portion of tooth -from pitch line to root.</p> - -<p>Now mark off with dividers and draw thickness of -rim (= pitch × 0.5), divide this line into six parts, draw -radii for centers of arms; draw the bore hole 7″ and -the thickness of metal for hub same as pitch.</p> - -<p>On radii lines of arms, draw the breadth of arm at -rim (= pitch and thickness of tooth), increase in breadth -approaching the center (1″ per foot), draw the thickness -of feather of arm (= pitch × 0.35); draw web on -inside of rim (= pitch × 0.375); fill in arcs for the joining -of arms in rim and hub (radii = pitch × 0.8) and -feather to rim and hub (radii = pitch × 0.37).</p> - -<p>Proceed in similar manner, completing the teeth -of pinion, and when pencil lines are all in, ink the drawing, -erasing all needless lines.</p> - -<p><i>P P</i> shows the pitch line; <i>B</i>, thickness of tooth; -<i>c</i>, breadth of space; <i>A</i>, the pitch; <i>E</i>, clearance at root; -<i>N</i>, the addendum of tooth; <i>O</i>, the root of tooth; <i>H</i>, -length of tooth from pitch line to point; <i>I</i>, length of -tooth pitch line to root; <i>G</i>, whole length of tooth; <i>F</i>, -thickness of rim; <i>J</i>, web or feather on rim; <i>K</i>, breadth -of arm; <i>L</i>, thickness of feather; <i>M</i>, hub, or thickness -round the eye.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—It must be remembered that no fixed standard has -ever been agreed upon for these proportions, and workshops differ -considerably in practice.</p> - -</div><!--note--> - -<p><span class="pagenum" id="Page211">[211]</span></p> - -<div class="container" id="Fig274"> -<img src="images/illo211.png" alt="Spur wheels" /> -<p class="caption">Fig. 274.</p> -</div> - -<p><span class="pagenum" id="Page212">[212]</span></p> - -<p>The number of teeth, their -proportions, pitch and diameter of -pitch circle are frequently determined -on the “Manchester” principle. -This system originated in -Manchester (Eng.), and is now -generally used in the United States -for determining diameters and -number of teeth, which, of course, -regulate speeds. The principle is -not applicable to large wheels, but -is limited in its application to small -wheels, or wheels having “fine -pitch,” as will be seen in the following -explanation, which is introduced -as very useful and indispensable -knowledge for the acquisition -of the student in mechanical -drawing.</p> - -<div class="container w45em" id="Fig275"> -<img src="images/illo212.png" alt="Gear" /> -<p class="caption">Fig. 275.</p> -</div> - -<p>The “pitch” of teeth has -already been stated to be the distance -from center of one tooth to -the center of another on the “pitch -line,” measured on the chord of<span class="pagenum" id="Page213">[213]</span> -the arc. In determining the number of teeth or pitch -of wheels on this principle, the pitch is reckoned -on the <i>diameter</i> of the wheel, <i>in place of the circumference</i>, -and distinguished as wheels of “4 pitch,” “6 -pitch,” “8 pitch,” etc. In other words, this means -that there are four, six, or eight teeth in the circumference -of the wheel for every inch of diameter.</p> - -<p>In designing gears to transmit power the stress on -a tooth is calculated; it determines the breadth or -width and also the thickness of the tooth on pitch line; -the space between the teeth is in proportion to the -thickness of tooth, and the thickness of both combined -(one tooth and one space), measured on the pitch line -or circle, is the pitch of the wheel.</p> - -<p>From the pitch all the proportions and measurements -for the sizes and strength of the parts of the wheel -are taken <i>by rule</i>, and a symmetrical form is produced.</p> - -<p>In machine drawing the practice is to represent -wheels by circles only; the teeth are never shown -except on enlarged details and then only in very rare -instances; the circles drawn are always the <i>pitch lines</i> -or the rolling points of contact of the wheels.</p> - -<p>The addendum circle is seldom if ever used in -practical drawing. Should it be necessary to show it -in an exceptional case, the circle would be represented -by “dotted” line.</p> - -<p>The shape of tooth and mode of constructing it, -as practiced in drawing offices, differs from the true -theoretical curve of the tooth, although very minutely.</p> - -<p>In all calculations for the speed of toothed gears the -estimates are based upon the pitch line, the latter standing -in the same place as the circumference of a pulley.</p> - -<p>To find the <i>diameter of a gear-wheel</i> multiply the -number of teeth by the pitch, divide by 3.1416.</p> - -<p>To find the <i>pitch of a gear-wheel</i> multiply the diameter -by 3.1416 and divide by the number of teeth.</p> - -<p>To find the <i>number of teeth in a gear-wheel</i> multiply -the diameter by 3.1416 and divide by the pitch.</p> - -<p>The <i>breadth of wheels</i>, where practicable, should be -at least three times the pitch.</p> - -<p><span class="pagenum" id="Page214">[214]</span></p> - -<div class="container w20em" id="Fig276"> -<img src="images/illo214.png" alt="Proportions" /> -<p class="caption">Fig. 276.</p> -</div> - -<p><a href="#Fig276">Fig. 276</a> shows a scale for proportions of teeth; it -is divided into tenths and used thus:</p> - -<p>Say wheel is 2″ pitch, then from pitch circle to -addendum will be 3<sup>1</sup>⁄<sub>2</sub> tenths, and from pitch circle to -root of tooth will be 4 tenths measured at the 2″ line -on scale, and so on.</p> - -<p>The decimal proportions already given in example, -page 210, are adopted in many workshops. Many -others use the proportions approved of by Sir William -Fairbairn, which are:</p> - -<p>Table of proportion of gears:</p> - -<table class="gears" summary="Proportions"> - -<tr> -<td class="wheel">Depth of tooth above pitch line</td> -<td class="speed">.35</td> -<td class="unit">of the pitch.</td> -</tr> - -<tr> -<td class="wheel">Depth of tooth below pitch line</td> -<td class="speed">.40</td> -<td class="unit">of the pitch.</td> -</tr> - -<tr> -<td class="wheel">Working depth of tooth</td> -<td class="speed">.70</td> -<td class="unit">of the pitch.</td> -</tr> - -<tr> -<td class="wheel">Total depth of tooth</td> -<td class="speed">.75</td> -<td class="unit">of the pitch.</td> -</tr> - -<tr> -<td class="wheel">Clearance at root</td> -<td class="speed">.05</td> -<td class="unit">of the pitch.</td> -</tr> - -<tr> -<td class="wheel">Thickness of tooth</td> -<td class="speed">.45</td> -<td class="unit">of the pitch.</td> -</tr> - -<tr> -<td class="wheel">Width of space</td> -<td class="speed">.55</td> -<td class="unit">of the pitch.</td> -</tr> - -</table> - -<p><span class="pagenum" id="Page215">[215]</span></p> - -<p>The diameter of a wheel or pinion is invariably the -diameter measured on pitch circle, except it is specially -described otherwise, thus the diameter “over all,” etc.</p> - -<p>The shape of the curved face of the teeth of gears -extending from the root to the addendum is the curve -conforming to the passage of the teeth described on -its fellow entering and leaving, as they rotate or roll -together on their pitch circles.</p> - -<p>The curve of teeth outside the pitch circle is called -“the face,” and the curve from pitch circle to root is -called “the flank.”</p> - -<p>The difference between the width of a space and -the thickness of a tooth is called clearance or side -clearance.</p> - -<p>The play or movement permitted by clearance is -called the backlash; clearance is necessary to prevent -the teeth of one wheel becoming locked in the spaces -of the other.</p> - -<p>Wheels are in gear or geared together when their -pitch lines engage, <i>i. e.</i>, when the pitch circles meet.</p> - -<p>Wheels to be geared together must have their -teeth spaced the same distance apart, or in other -words, of the same pitch.</p> - -<p>The teeth of spur wheels are arranged on its -periphery parallel to the wheel axis, or shaft on which -it is hung.</p> - -<p>The teeth of a bevel wheel or bevel gears are -always arranged at an angle to the shaft.</p> - -<p>When the <i>teeth</i> of bevel gears form an angle of -45° they are called miter wheels.</p> - -<p>Miter wheels to gear must be of equal sizes.</p> - -<p>A crown wheel is a disc that has teeth which are -on its side face; that is, teeth on a flat circular -surface all parallel to the axis of the wheel.</p> - -<p>A rack has teeth on a flat surface or plane all -parallel to one another.</p> - -<p>A gear cut by machine is called a <i>cut gear</i>. It has -teeth with less clearance than cast wheels, which are -not so true or perfect, and therefore require more -clearance.</p> - -<p><span class="pagenum" id="Page216">[216]</span></p> - -<p>A worm with even a light load is liable to heat -and cut if run at over 300 feet of rubbing surface -travel. The wheel teeth will keep cool, as they form -part of a large radiating surface; the worm itself is so -small that its heat is dissipated slowly.</p> - -<p>A worm throws a severe end thrust or strain on -its shaft.</p> - -<p><i>Steel Gears.</i>—There is great economy in the use -of cast-steel over cast-iron in gears; the average life of -the former is nearly twice as great as of cast-iron gears. -And, apart from their longer life and efficiency, there -is less danger of breaking.</p> - -<p>The most accurate teeth, strongest and most -uniform in wearing, are to be found in steel gears cut -from solid stock, or made by cutters of proper shape.</p> - -<p><a href="#Fig275">Fig. 275</a> shows an elevation and a vertical section -of a spur wheel. From these views the various parts -in spur gears can be better understood, as they are -represented here in combination, and the wheel in its -entirety.</p> - -<p><i>AA</i> is the horizontal center line, <i>BB</i>, <i>BB</i> the vertical -center lines, <i>II</i> and <i>II</i> the pitch lines, <i>N</i> thickness -of tooth, <i>O</i> space of tooth, <i>D</i> total depth of tooth, -<i>C</i> breadth of face, <i>F</i> diameter on pitch line, <i>P</i> diameter -over all, <i>G</i> diameter of hub, <i>E</i> diameter of hole, <i>H</i> depth -of hole, <i>L</i> thickness of rim, <i>M</i> thickness of web.</p> - -<p>Much has been and still is being written on gearing. -No general rule is followed by the writers; the elementary -principles given will enable the student to master -spur gearing, and bevel and combinations of many -kinds of wheels will afterwards be found easier to -delineate than the numerous lines seem to indicate.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page217">[217]</span></p> - -<div class="container w30em"> -<img src="images/illo217.png" alt="WORKING DRAWINGS" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page218">[218]</span></p> - -<div class="container w40em" id="Fig277"> -<img src="images/illo218.png" alt="Crane" /> -<p class="caption">Fig. 277.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page219">[219]</span></p> - -<h2 class="nobreak">Working Drawings.</h2> - -</div><!--chapter--> - -<p>From the “plans” made in the office are produced “working drawings”—which represent in detail the work -to be done to exact measurement and of material, as indicated, by the pattern-maker, the foundry, the forge, the -shop, and finally, by the erector of the completed mechanism.</p> - -<p>How to satisfactorily fulfill the directions contained in these drawings, representing only a part of the work, so -that it will fit, with needed accuracy, to all other parts of the design, is the task before each separate worker.</p> - -<p>It is by means of this division of the process of -manufacture through these drawings, that scores and -hundreds of men can be employed at the same time -upon a single engine or machine; thus, while handwork -has been superseded by machines in many quarters, -the art of drawing has not been narrowed nor -diminished, for no drawings or designs have yet been -made by machinery, nor are they likely to be.</p> - -<p>It is thus that a good designer and draughtsman -“projects” or extends himself, to the advantage of -many fellow workers.</p> - -<p>The drawing, <a href="#Fig277">fig. 277</a>, shows a simple form of pillar -crane: it consists of an upright cast-iron pillar, which is -bolted on a cap stone, under which is the foundation plate -not shown in the drawing; the boom is of rolled steel, -supported by steel tie rods, and provided with rollers -at the base; the hoisting gear is shown in broken -lines and circles; all as seen in the drawing.</p> - -<p><span class="pagenum" id="Page220">[220]</span></p> - -<div class="container" id="Fig278279"> -<img src="images/illo220.png" alt="Beam bender" /> -<p class="caption">Fig. 278.—Fig. 279.</p> -</div> - -<p><span class="pagenum" id="Page221">[221]</span></p> - -<div class="container w40em" id="Fig280"> -<img src="images/illo221.png" alt="Beam bender" /> -<p class="caption">Fig. 280.</p> -</div> - -<p><a href="#Fig278279">Figs. 278, 279</a> and <a href="#Fig280">280</a> show a drawing -of a “hydraulic beam bending machine” in -three views; <a href="#Fig280">fig. 280</a> is a plan, <a href="#Fig278279">fig. 278</a> is an -end elevation, and <a href="#Fig278279">fig. 279</a> a side elevation, -and a portion of the latter in section shows -the interior construction.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—These three views are a practical illustration -of drawings for a machine of the following -dimensions: this machine has a bed 3 × 5 feet in area, -with 27 holes in each side for the bending pins. The -frame and cylinders are made of cast iron, the rams of -machinery steel, and the slides for holding the bending -blocks, of steel casting. The distance between -the bending blocks is 17 inches. The cylinders are -copper lined, 8 inches diameter, and the rams have -a 6-inch stroke. The rams, which are independent -and single acting, are returned by counterweights -placed as shown under the table. The cylinders can -be operated independently from either side of the -machine by an arrangement of valves and levers. -The machine complete weighs about 7,500 lbs.</p> - -</div><!--note--> - -<p><span class="pagenum" id="Page222">[222]</span></p> - -<div class="container" id="Fig281283"> -<img src="images/illo222.png" alt="Press" /> -<p class="caption">Fig. 281.—Fig. 282.—Fig. 283.</p> -</div> - -<p><span class="pagenum" id="Page223">[223]</span></p> - -<p>The drawing, <a href="#Page222">page 222</a>, shows three views of a -power punching press.</p> - -<p><a href="#Fig281283">Fig. 282</a> is a side elevation.</p> - -<p><a href="#Fig281283">Fig. 283</a> a front elevation.</p> - -<p><a href="#Fig281283">Fig. 281</a> a vertical sectional view; from these views -the proportion, general arrangement and disposition of -the automatic devices can be easily understood; it may -be well to call particular attention to the automatic -clutch on the top shaft and the tripping device.</p> - -<div class="container w40em" id="Fig284"> -<img src="images/illo223.png" alt="Packing" /> -<p class="caption">Fig. 284.</p> -</div> - -<p>This drawing, <a href="#Fig284">fig. 284</a>, shows a side elevation in -section of a self-adjusting piston-rod packing.</p> - -<p><i>A</i> is the gland, <i>B</i> is the piston rod, <i>C</i> is a brass -sleeve which contains the packing <i>D</i>, <i>E</i> is the cylinder -cover, <i>F</i> is a coil spring. It will be seen that the spring -<i>F</i> abuts on a bushing in the bottom of the stuffing box -and is prevented from scoring the piston rod by stepping -over the ends of the bushing and follower. All -as shown in the drawing.</p> - -<p><span class="pagenum" id="Page224">[224]</span></p> - -<p>The drawing, <a href="#Fig285">fig. 285</a>, shows a sectional view of a -large pulley fixed on a “quill,” or hollow shaft: the -driving shaft passes through the hollow shaft and is -attached to the friction clutch shown at the right-hand -end; this friction clutch drives the hollow shaft and -pulley.</p> - -<div class="container" id="Fig285"> -<img src="images/illo224.png" alt="Drive train" /> -<p class="caption">Fig. 285.</p> -</div> - -<p><span class="pagenum" id="Page225">[225]</span></p> - -<p><a href="#Fig286">Fig. 286</a> shows the mechanism, called the link-motion, employed to reverse an engine, or to enable it to be -run in either direction. Many forms of link-motion have been devised, but the Stephenson form, as shown in the -figure, is, however, the one in almost universal use.</p> - -<div class="container" id="Fig286"> - -<img src="images/illo225.png" alt="Link-motion" /> - -<p class="caption">Fig. 286.</p> - -<p class="center highline15">This drawing shows shading and the mode of figuring the parts for identification.</p> - -</div><!--container--> - -<p><span class="pagenum" id="Page226">[226]</span></p> - -<div class="container" id="Fig287289"> -<img src="images/illo226.png" alt="Bumping post" /> -<p class="caption">Fig. 287.—Fig. 288.—Fig. 289.</p> -</div> - -<p><span class="pagenum" id="Page227">[227]</span></p> - -<p><a href="#Fig287289">Figs. 287 to 289</a> represent a bumping-post for -the end of railway tracks, reproduced on an enlarged -scale from the columns of the <i>Engineering News</i>.</p> - -<p>In addition to the lettering and dimensions, admirably -shown in the drawings, the following description -is appended to show how printed text and mechanical -drawings mutually aid in practical—or commercial—usage.</p> - -<p>The unique feature of the arrangement shown, -is that the center line of the post does not coincide -with the track, thus adapting itself to the nature of -the blows of a car-bumper, as received in the single-post -style of the mechanism.</p> - -<h3>BUMPING POST FOR RAILWAY TRACKS.</h3> - -<p>The post is a 15-in. steel I-beam, resting on a base -plate <sup>3</sup>⁄<sub>4</sub>-in. thick, and supported by anchor rods 1<sup>3</sup>⁄<sub>4</sub> ins. -diameter, with upset ends held by nuts on a heavy -forging bolted to the top of the post. These rods -extend forward and outward to clear the rails, and then -pass vertically through a 4 × 6-in. angle iron crosstie, -and an ordinary wooden tie, extending down to an -anchor block or deadman buried in the ground 6<sup>1</sup>⁄<sub>2</sub> ft. -below the top of the rail.</p> - -<p>Vertical braces or spreaders are fitted between the -anchor timber and a longitudinal timber under the ties, -so as to prevent the loosening of the anchor rods when -the post is struck. The rods are held in position -against the rails by steel forgings bolted to the rail -with 1-in. turned bolts. An oak striking block, 12 × 12 -ins., 3 ft. long, is bolted between angle iron brackets -on the face of the post.</p> - -<p><span class="pagenum" id="Page228">[228]</span></p> - -<div class="container w40em" id="Fig290291"> - -<img src="images/illo228.png" alt="Steady rest" /> - -<div class="split6733"> - -<div class="left6733"> -<p class="caption">Fig. 290.<br /> -Front View.</p> -</div> - -<div class="right6733"> -<p class="caption">Fig. 291.<br /> -Side View.</p> -</div> - -<p class="thinline allclear"> </p> - -</div><!--split6733--> - -<p class="caption">Scale, 3 in. = 1 ft.</p> - -</div><!--container--> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page229">[229]</span></p> - -<h2 class="nobreak">To Read Working Drawings.</h2> - -</div><!--chapter--> - -<p>One of the advantages resulting from a knowledge of practical draughting is, that it enables a mechanic to -<i>read</i> a drawing when given him as a guide for his work. It is getting every day more general among draughtsmen -to figure exactly and minutely every part of their drawings which are made to a scale.</p> - -<p>Drawings are almost always made “finished size,” -that is, the dimensions are for the work when it is -completed. Consequently all the figures written on -the different parts indicate the exact size of the work -when finished, without any regard to the size of the -drawing itself, which may be made to any reduced and -convenient scale.</p> - -<p>Even in full size drawings this system of figuring -is not objectionable. It is a system which should be -followed whenever a drawing is made “to work to,” -for it allows the workman to comprehend at a glance -the size of his work and the pieces he has to get made. -Figuring makes a drawing comprehensible even to -those who cannot make drawings.</p> - -<p><span class="pagenum" id="Page230">[230]</span></p> - -<p>A working drawing should be made, primarily, as -plain as possible by the draughtsman; second, the -workman should patiently and carefully study it, so -that it is thoroughly understood.</p> - -<p>In studying a drawing, the object it is intended to -represent should be made as familiar as possible to the -mind of the student, so that he may fill out in imagination -the parts designedly left incomplete—as in a -gear wheel where only two or three teeth are drawn in, -that he may see, mentally, the whole.</p> - -<p>The following is a description of reading drawings -when dimensions are not figured. Here we have a -piece of machinery represented by <a href="#Fig290291">fig. 290</a>, and the -information we have is that it is to scale, three inches -= one foot. Now, with scale and dividers, we can -arrive at its actual dimensions.</p> - -<p>Measurements should be first taken <i>with the -dividers from the drawing</i>, and then the dividers -applied to the scale to which the drawing is made; -this scale is always marked on the working drawing; if -the dividers are set to the length of the base of the -example, <a href="#Fig290291">fig. 290</a>, they will measure, on an ordinary -two-foot rule, three and three-fourths inches, <i>but if -applied to the three-inch scale they will read</i> one foot -three inches, the actual length of the part; the “reading” -is from the scale; thus, in both figures the drawings -are “three-inch scale.”</p> - -<p>Now, 3 inches is one-fourth of a foot, hence -3<sup>3</sup>⁄<sub>4</sub> × 4 = 1 ft. 3 in., the full size, and so on for all -parts of the drawing.</p> - -<p><a href="#Fig290291">Fig. 291</a> shows <i>a side view</i> of the “steady rest,” -illustrated in front elevation, <a href="#Fig290291">fig. 290</a>; from the scale -as before we get the sizes; the two views combined -give length, breadth and thickness of the parts.</p> - -<p>In some figures it is necessary to show end views, -also section views, to enable all measurements to be -read from the drawing.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page231">[231-<br />232]</span><a id="Page232"></a></p> - -<div class="container w30em"> -<img src="images/illo231.png" alt="PATENT OFFICE DRAWINGS" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page233">[233]</span></p> - -<h2 class="nobreak">Patent Office Drawing Rules.</h2> - -</div><!--chapter--> - -<h3 class="center">U. S. PATENT OFFICE RULES.</h3> - -<h4>AS APPLIED TO PREPARATION OF DRAWINGS.</h4> - -<p>Each applicant for a patent is required by law to -furnish a drawing of his invention whenever the nature -of the case admits of it. The drawing must be signed -by the inventor or the name of the inventor may be -signed on the drawing by his attorney-in-fact, and in -either case must be attested by two witnesses. The -drawing must show every feature of the invention -covered by the claims.</p> - -<p>When the invention consists of an improvement -on an old machine, the drawing must exhibit, in one or -more views, the invention proper, disconnected from -the old structure, and also, in another view, so much -only of the old structure as will clearly show the connection -of the invention with the old machine.</p> - -<p>Several editions of the patent-drawings are printed, -the smallest of which is about 3 × 4<sup>3</sup>⁄<sub>4</sub> inches, so that the -drawing must be so made that it will stand a reduction -of about one-fourth. This work is done by the photo-lithographic -process, and therefore the character of the<span class="pagenum" id="Page234">[234]</span> -original drawing must be brought as nearly as possible -to a uniform standard of excellence suited to the -requirements of the process.</p> - -<div class="note"> - -<p><span class="smcap">Note.</span>—These rules will be found most useful to many -readers of this work—hence their introduction at this point. -Nearly 50,000 patents are “applied for” in the United States -every year.</p> - -</div><!--note--> - -<p>The following rules are given by the Patent Office -for guidance:</p> - -<p>1. Drawings must be made upon pure white -paper of a thickness corresponding to three-sheet -Bristol board. The surface of the paper must be -calendered and smooth. India ink alone must be used, -so as to secure perfectly black and solid lines.</p> - -<p>2. The size of a sheet on which a drawing is -made must be exactly 10 × 15 inches. One inch from -its edges a single marginal line is to be drawn, leaving -the “sight” precisely 8 × 13 inches. Within this margin -all work and signatures must be included. One of the -shorter sides of the sheet is regarded as its top, and -measuring downwardly from the marginal line, a space -of not less than 1<sup>1</sup>⁄<sub>4</sub> inches is to be left blank for the -heading of title, name, number and date.</p> - -<p>3. All drawings must be made with the pen only. -Every line and letter, signature included, must be -absolutely black. This direction applies to all lines, -however fine, to shading, and to lines representing cut -surfaces in sectional views. All lines must be clean, -sharp, and solid, and they must not be too fine or -crowded. Surface shading, when used, should be open. -Sectional shading should be made by oblique parallel -lines about <sup>1</sup>⁄<sub>20</sub> of an inch apart. Solid black should not -be used for sectional or surface shading.</p> - -<p>4. Drawing must be made of the fewest lines -possible, consistent with cleanness. The plane upon -which a sectional view is taken should be indicated by -a broken or dotted line. Heavy lines on the shade -side of objects should be used, except where they tend -to thicken the work and obscure letters of reference. -The light is always supposed to come from the upper -left hand corner at an angle of 45 degrees.</p> - -<p>5. The scale to which a drawing is made should -be large enough to show the mechanism without -crowding. The number of sheets used must never be -more than is absolutely necessary.</p> - -<p><span class="pagenum" id="Page235">[235]</span></p> - -<div class="container w30em" id="Fig292"> -<img src="images/illo235.png" alt="Invention" /> -<p class="caption">Fig. 292.</p> -</div> - -<p><span class="pagenum" id="Page236">[236]</span></p> - -<p>6. The different views should be consecutively -numbered. Letters and figures of reference must be -carefully formed. They should, if possible, measure -at least one-eighth of an inch in height.</p> - -<p>If the same part of an invention appears in more -than one view of the drawing it must always be represented -by the same character.</p> - -<p>7. The signature of the inventor is to be placed -in the lower right-hand corner of each sheet, and those -of the witnesses at the lower left-hand corner.</p> - -<p>The title should be written with pencil on the back -of the sheet.</p> - -<p>Drawings should be rolled for transmission, never -folded.</p> - -<p>On <a href="#Page235">page 235</a>, <a href="#Fig292">fig. 292</a> exhibits a reproduction of a -patent office drawing, used in connection with specification -papers in an application for a United States -patent.</p> - -<h4>ENGLISH PRACTICE.</h4> - -<p>The rules for patent drawings in England are -practically the same as in the United States; the -paper sizes are, however, different. They must be on -sheets of one of the two following sizes (the smaller -being preferable), 13 inches at the sides by 8 inches -at the top and bottom, or 13 inches at the sides by 16 -inches at the top and bottom, including margin, which -must be one-half an inch wide.</p> - -<p>If there are more figures than can be shown on -one of the smaller-sized sheets, two or more of these -sheets should be used in preference to employing the -large size. When an exceptionally large drawing is -required, it should be “<i>continued</i>” on subsequent -sheets. There is no limit to the number of sheets that -may be sent in.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page237">[237]</span></p> - -<div class="container w30em"> -<img src="images/illo237.png" alt="PRACTICAL POINTS" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page238">[238]</span></p> - -<div class="container w40em" id="Fig293"> -<img src="images/illo238.png" alt="Practice figure" /> -<p class="caption">Fig. 293. See <a href="#Page244">page 244</a>.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page239">[239]</span></p> - -<h2 class="nobreak">Useful Hints and “Points.”</h2> - -</div><!--chapter--> - -<p>Many of these “points” are repetitions, with but little variation from the way they have been previously -stated; they are thus repeated to emphasize their practical worth.</p> - -<p>A good draughtsman leaves his work in such a -state that any competent person can without difficulty -ink in what he has drawn.</p> - -<p>The criterion of a good set of drawings is that -with a properly prepared specification they are complete -in themselves and require no explanation.</p> - -<p>A “break” in a figure or object in a drawing is -shown in rough irregular lines, as in <a href="#Fig134">fig. 134</a>, on <a href="#Page131">page -131</a>; this is useful when the paper is not large enough -to show the whole.</p> - -<p>Never use a sloping line in writing fractions on a -drawing. The objection arises from the fact that such -a dimension as 1<sup>3</sup>⁄<sub>16</sub>, if written with the inclined line, -unless very distinctly executed, may be read as <sup>13</sup>⁄<sub>16</sub>.</p> - -<p>In inking do not draw the lines further than you -wish them to go, but in penciling it is well to extend -the lines, free up.</p> - -<p>Never use a scale for a ruler.</p> - -<p>Do not overload the pen with ink.</p> - -<p><span class="pagenum" id="Page240">[240]</span></p> - -<p>Having filled the pen, nearly close the nibs and -try the width of the line on a piece of paper or the -margin of the drawing.</p> - -<p>Never refill or lay the pen aside without first cleaning -it.</p> - -<p>The application of the science of geometry to the -drawing-board is absolutely necessary to success, for -the reason that the whole fabric of mechanical drawing -rests on the principles of geometry, which is well -termed the science of measurements.</p> - -<p>Section lines should be the last inked and always -without previous penciling.</p> - -<p>Center lines are necessary in working drawings.</p> - -<p>In choosing T-squares, care should be exercised to -see that the head slides up and down the <i>left</i>-hand side -of the board easily, and that when pressed against the -board with the left hand there is no “slogging” of the -blade up or down, or in other words, that the head is -bearing firmly for its whole length against the board.</p> - -<p>The best place for the title of a drawing is said to -be the upper left-hand corner; this facilitates the filing -of the sheet.</p> - -<p>Never use a soft pencil except for finishing in -shadow lines.</p> - -<p>The rubber should always be kept clean.</p> - -<p>Great care should be taken to keep drawing boards -out of the way of heat or damp, as these cause the -wood to warp.</p> - -<p>Circles and curves are to be “inked in” before -straight lines. First ink the smallest and afterwards -the larger curves.</p> - -<p>Do not press heavily on the pencil so as to cut the -paper, but draw lightly, so that the mark can be erased -and leave no trace, especially if the drawing is to be -inked.</p> - -<p>The draughtsman should commence his work at -the top of the paper, keeping the lower part covered -over until he needs to use it.</p> - -<p><span class="pagenum" id="Page241">[241]</span></p> - -<p>Shade lines should be avoided in all working -drawings, as their use interferes with accurate measurements.</p> - -<p>To make ink stick to the tracing cloth, with a -woolen cloth rub some powdered chalk or pounce over -the surface on which the ink lines are to be drawn, then -wipe the surface clean and use a good quality of ink.</p> - -<p>For striking small circles a small bow pen should -be used.</p> - -<p>To fix lead pencil marks on sketches so that they -cannot be readily erased, sponge them with milk carefully -skimmed, then lay blotting paper over them and -iron with a hot flat-iron.</p> - -<p>To have the ink preserve its fluidity and to keep -out all dirt and dust, keep the cover on the ink slab; -the mistake is often made of putting too liberal a supply -of water in ink well, which causes a waste of both -time and ink; no more should be prepared than to -meet immediate requirements.</p> - -<p>Always draw on the right side of the sheet, which -can be found by holding the sheet up to the light and -looking across its surface with the eye nearly in the -same plane as the paper; note which side is the smoothest -and has the least number of blemishes on it; this is -the right side to draw on.</p> - -<p>As to sharpening pencils, it is always best to cut a -chisel point on the pencil used for drawing, and put a -circular point on the pencils in the bow pencil and -pencil leg. The chisel point makes a finer line and -lasts much longer than a round point.</p> - -<p>The varnish used in many large drawing-rooms is -simply white shellac dissolved in alcohol; it requires a -little experience to mix these to a proper consistency, -but this is soon acquired.</p> - -<p>Never sharpen your pencil over the drawing.</p> - -<p>A center line of a drawing is the line upon which -the figure is to be constructed; the center line is the -first line to be drawn.</p> - -<p><span class="pagenum" id="Page242">[242]</span></p> - -<p>The T-square belongs to the left side of the drawing-board, -and is operated by the left hand. The right -hand should be kept free for the purpose of picking up -pencil, pen and bows, adjusting and marking off. The -left hand controls the T-square and the triangle that -slides along the upper edge of the square; the right -hand is for the instruments.</p> - -<p>The advantage of a paper rule or scale is that the -paper will expand and contract under varying degrees -of atmospheric moisture the same as the drawing does.</p> - -<p>Avoid rubbing out and constantly cleaning the -drawing with India rubber; if wrong lines are made or -it is desired to make alterations, the part to be changed -should be rubbed out and completely re-drawn.</p> - -<p>When using the bows see to it that the steel-pointed -leg that is put down first on the paper, to -secure a center for a curve or a circle, is a trifle longer -than the pencil or pen leg.</p> - -<p>To clearly indicate the position of a center which -is to be used again, lightly pencil a small circle about -it; never put the point of a pencil in the center hole -to enlarge or blacken it; the prick point made by the -dividers and needle points should be no more than can -be just seen, hence the circle to be made as advised -above.</p> - -<div class="container rightfloat w07em" id="Fig294"> -<img src="images/illo244.jpg" alt="Drawing case" /> -<p class="caption">Fig. 294.</p> -</div> - -<p>Be particular in having the legs of the dividers -exactly the same length, and sharp, so that in pricking -off distances, and dimensions, and centers, the indent -or hole made in the paper is as small as possible.</p> - -<p>The term “plane” means a perfectly flat surface; -that is, something which has length and breadth but -no thickness.</p> - -<p>The best way to indicate on the drawing the surfaces -which are to be finished is to write on the lines -which represent the finished surfaces “finished,” tool-finish, -or “faced,” according to the degree of finish required. -The single letter <i>f</i> is frequently used.</p> - -<p>Avoid fingering the drawing sheet as much as possible; -in pointing to any part of the drawing use a -pencil and not the finger.</p> - -<p>Remember that a drawing is made to be read.</p> - -<p><span class="pagenum" id="Page243">[243]</span></p> - -<p>The skill in inking does not depend on the fineness -of the line, but on its clearness.</p> - -<p>A soft pencil should never be used on a mechanical -drawing unless in rare cases when it is used for pencil -shading; the hardness or softness of pencils is denoted -by letters.</p> - -<p>Never ink any portion of a drawing until the -penciling is entirely finished.</p> - -<p>Stretching or pasting the paper to the board is -very seldom resorted to, for the reason that the -mechanical drawings are <i>to scale</i> and the paper is -natural when pinned to the board and more correct -than if under a strain. Mechanical drawings are -always required in practice <i>right away</i>, and time would -be wasted and lost in damping and pasting and drying -again.</p> - -<p>A working drawing, whether made to a scale or -not, must have all the dimensions plainly written upon -it, for a workman should never be compelled to measure -a drawing.</p> - -<p>In marking off distances, centers, etc., a fine needle -point is useful; the hole should not be punctured -through the paper, merely a prick point, so that it -will leave an impression, which will not be obliterated -by the use of rubber; drawing-pens are often equipped -with such a needle point in the end of the handle, -that is visible only when the pen is unscrewed from -the handle; but in the absence of one of this kind the -point of the divider leg will be of use.</p> - -<p>Mechanical construction drawings represent a large -amount of mental and manual work, as well as a considerable -cost in money; hence, they are of value quite -as much as property which has been acquired by the -expenditure of either labor or capital. It is wise to -keep copies of original designs and sketches, as well as -data and formulæ, for record and comparison.</p> - -<p>The best system for keeping drawings is to make -them of certain standard sizes, and to keep them flat, -unrolled, in drawers, numbered, lettered and labeled.</p> - -<p><span class="pagenum" id="Page244">[244]</span></p> - -<p>In an office where space is limited and drawings -have to be rolled it is well to use a number of pasteboard -cases about three feet long and three inches in -diameter. These are shown in <a href="#Fig294">fig. 294</a>.</p> - -<p>A puncture can be made near the top and, when a -new drawing or blue-print is inserted in this cylindrical -case, a cardboard tag can be looped through the puncture. -This label will give the title and number of -drawings in that case.</p> - -<p>A manuscript book methodically and neatly kept -should tell immediately the number of the drawing -and the case.</p> - -<p><a href="#Fig293">Fig. 293</a> is good for practice in line drawing and -also as an optical illusion. “You look and are deceived. -At first glance you say, ‘Of course, those two -lines are curved.’ You are mistaken. They are exactly -parallel. In order to prove this hold them up edgewise -to the eye. It is, of course, the subsidiary lines which -lead the vision astray. It is a case of first impressions -being quite wrong.”</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page245">[245]</span></p> - -<div class="container w30em"> -<img src="images/illo245.png" alt="LINEAR PERSPECTIVE" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page246">[246]</span></p> - -<div class="container" id="Fig295"> -<img src="images/illo246.jpg" alt="Fishing boy" /> -<p class="caption">Fig. 295.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page247">[247]</span></p> - -<h2 class="nobreak">Linear Perspective.</h2> - -</div><!--chapter--> - -<p>It should be mentioned that this subject is outside -the limits of mechanical drawing, which only deals -with objects that can be measured, projected or -dimensioned to an accurate scale.</p> - -<p>But, in rounding out the more formal subjects it -is well to look a little outside the rigid lines of mechanics -into the methods of nature, for no system of -teaching drawing is complete that does not include -some explanations for sketching from nature—the -objects being always around the student, the eye -always clear to see and the hand only needing -the training to make permanent the impressions received.</p> - -<p>The word perspective means to <i>see through</i>; the -word perspective being derived from the Latin word -<i>perspicere</i>, to look through, hence, perspective is a -science which teaches us to <i>see</i> correctly and enables -us to represent the <i>appearance</i> of anything we may -wish to draw; care should be taken in perspective -drawing, to select objects interesting in themselves, and -the best specimens of their class, so as to cultivate -taste, while they at the same time afford useful and -instructive drawing lessons.</p> - -<p>The meaning of the term linear perspective is a -line view; the previous examples have been composed -of surfaces placed fronting the eye; perspective is the -science which treats of the changes of form produced -by viewing them in various oblique positions.</p> - -<p><span class="pagenum" id="Page248">[248]</span></p> - -<p>The slightest alteration of <i>position</i> -will change the <i>appearance</i> -of an object; this can be easily -shown—for illustration take a coin, -the actual shape of which is a -perfect round; or, strictly speaking, -a circle. If we take the coin -between the thumb and the first -finger, holding it in an upright -position, and exactly facing the -eyes, as in <a href="#Fig296298">Fig. 296</a>, it appears of its true form, viz., a -circle. If we alter its position, balancing it upon the -thumb, in a level position, with its edge directly opposite -the eye, as in <a href="#Fig296298">Fig. 297</a>, its appearance is changed, -and what we know to be really a circle, appears to us -as a straight line.</p> - -<div class="container w40em" id="Fig296298"> -<img src="images/illo248.jpg" alt="Perspective" /> -<p class="caption">Fig. 296.—Fig. 297.—Fig. 298.</p> -</div> - -<p>Now, still balancing the coin upon the thumb, but -changing its position with regard to the eye, by holding -it a little lower than in the last position, that is slightly -beneath the level of the eye, as in <a href="#Fig296298">fig. 298</a>, we see both -the edge and the surface, the coin now appearing -neither a circle nor a straight line, but a curved figure -of an elliptical form. Thus the same coin held in three -different positions has assumed three different shapes.</p> - -<p>Let us take two coins of the same size, holding (in -the position shown at <a href="#Fig296298">fig. 296</a>) one in each hand. Now, -closing one eye, (which will make the experiment more -clear), hold one coin out -at arm’s length, and the -other at about the distance -of a foot from the eye. -On comparing them, we -find that the coin which -is further from the eye -appears less than the -nearer one. We know that -the coins are really equal -in size, yet one appears -smaller than the other.</p> - -<p><span class="pagenum" id="Page249">[249]</span></p> - -<p>We thus see that when we change the position of -an object, we have as a consequence a change of -appearance; also that the change of appearance may -affect both the shape and the size of the object.</p> - -<p>These diversities of appearance may be remarked -in everything around us. We can observe them in the -street by looking at a building from different points of -view, or by comparing the apparent sizes of the street -lamps; in the railway station, by watching the arriving -or departing train; and at sea, by noticing the vessels -as they approach, or as they retire, ultimately vanishing -from our sight in that line where the sea and sky -appear to meet.</p> - -<p>All these interesting variations of appearance are -in strict accordance with the laws of <b>GEOMETRY</b> and -<b>OPTICS</b>. The former subject has been enlarged upon -beginning with <a href="#Page81">page 81</a> of this work, where a line, a -point, an angle, etc., are defined; other terms are -explained at <a href="#Page41">page 41</a> and the following pages; to these -we add a few definitions essential to the subject.</p> - -<p><b>A PLANE</b> is a surface which is perfectly even and -flat; to use a familiar illustration, a plane is like the -surface of a sheet of plate glass; recollect particularly, -that a surface which is at all curved, is not a plane.</p> - -<p>The <b>GROUND-PLANE</b> is the plane on which we -stand; the <i>base-line</i> is an imaginary line passing -through the middle of the feet as we stand square and -erect; and the <i>vertical plane</i> is supposed to stand -on the base-line and perpendicular to it.</p> - -<div class="container" id="Fig299"> -<img src="images/illo249.png" alt="Perspective" /> -<p class="caption">Fig. 299.—See <a href="#Page255">page 255</a>.</p> -</div> - -<p><span class="pagenum" id="Page250">[250]</span></p> - -<p>Planes are parallel to each other when they are -throughout their entire surfaces the same distance -apart.</p> - -<div class="container w30em" id="Fig300"> -<img src="images/illo250a.png" alt="View plane" /> -<p class="caption">Fig. 300.</p> -</div> - -<p><b>THE PERSPECTIVE PLANE</b> is an upright square -of glass, usually framed like a picture, with a base, so that -it can stand up alone. This is placed between the eye -of the spectator and the subject to be drawn, and as -the drawing is sometimes made directly upon it, it is -sometimes called the <i>Picture</i> or the <i>Plane of the -Picture</i>.</p> - -<div class="container w30em" id="Fig301"> -<img src="images/illo250b.png" alt="House" /> -<p class="caption">Fig. 301.</p> -</div> - -<p><b>HORIZONTAL</b> means perfectly level, like the surface -of still water. We must be careful to understand -perfectly the difference between the terms “level” and -“even” or “flat.” A surface may be even or flat, -without being level. Thus the wall is even and flat, -but it is upright, not level; level means a fixed, constant -position.</p> - -<p><span class="pagenum" id="Page251">[251]</span></p> - -<p>In <a href="#Fig301">fig. 301</a> a house is shown in perspective in -which the line <i>H L</i> is the line of the horizon and <i>V P</i> -is <span class="nowrap">the,—</span></p> - -<p><b>VANISHING POINT.</b>—The vanishing point is familiarly -represented by the rails on a trolley track on a -straight road, which seem to approach each other in the -distance, as shown in <a href="#Fig302">fig. 302</a> at <i>V P</i>.</p> - -<div class="container w40em" id="Fig302"> -<img src="images/illo251a.jpg" alt="Perspective" /> -<p class="caption">Fig. 302.</p> -</div> - -<p><i>All parallel lines seen in perspective appear to meet -in the same vanishing point.</i></p> - -<p>The value of the vanishing point may be seen in -the view of a wooden house, <a href="#Fig303">fig. 303</a>, where it (<i>V P</i>) -gives direction to the retiring lines of the roof, side -planks and door.</p> - -<div class="container w40em" id="Fig303"> -<img src="images/illo251b.png" alt="Perspective" /> -<p class="caption">Fig. 303.</p> -</div> - -<p><b>POINT OF SIGHT.</b>—This is that point in the eye -where the lines or rays from the object cross each -other, as shown at <i>P</i> in <a href="#Fig305">fig. 305</a>, also in <a href="#Fig299">fig. 299</a> at <i>S</i>.</p> - -<p><b>VERTICAL</b> means perfectly upright. If we attach -a piece of thread to a weight, a small piece of lead for<span class="pagenum" id="Page252">[252]</span> -example, and hold the thread with the lead hanging -downwards, the thread will fall in an upright or vertical -position.</p> - -<p><b>PARALLEL</b> lines are said to be parallel to each -other when they are throughout their whole lengths -the same distance apart.</p> - -<p><b>PERPENDICULAR.</b> When one straight line, meeting -another, makes the angles at the point of contact -equal, each of the angles is called a right angle, and -the lines are said to be perpendicular to each other. -Remember especially that perpendicular and vertical -have not the same meaning. Vertical means an unvarying -upright position. Perpendicular means that -one line or plane meets another line or plane at right -angles.</p> - -<p>The <a href="#Fig295">fig. 295</a> on <a href="#Page246">page 246</a> is a study in perspective, -showing a water reflection. As rays from every visible -part of the object are reflected, all following the same -law, the reflection will appear to the eye <i>inverted</i>, and -of the <i>same size as the object</i>. The arch itself forms -the upper half of a hollow cylinder, and the reflection -forms the lower half. The reflection shows much -more of the interior of the arch than can be seen -directly. The leaning tree, the boy fishing, and the -receding banks, all are seen in accordance with the laws -of reflection and perspective.</p> - -<p><b>THE HORIZONTAL LINE, THE POINT OF -SIGHT AND THE VANISHING POINTS</b> are the principal -items. These should be studied in every room -and during every walk, and the more pleasing accidents -of form stored in the mind or committed to paper for -future use.</p> - -<div class="container leftfloat w15em" id="Fig304"> -<img src="images/illo253a.jpg" alt="Eye" /> -<p class="caption">Fig. 304.</p> -</div> - -<p><b>OPTICS</b>, the science of sight, gives us the following -laws:</p> - -<p>1. That we see by the agency of light.</p> - -<p>2. That light passes from objects to our eyes.</p> - -<p>3. That light travels in straight lines, which are -called Visual Rays.</p> - -<p><span class="pagenum" id="Page253">[253]</span></p> - -<p>The human eye may be briefly described as a -chamber of a spherical or globular form, with a circular -opening in front. This circular -opening is called the pupil, and -through it the visual rays pass to -the interior of the eye. The visual -rays, passing from space in all directions -through the small pupil, are -received upon what may be called the interior wall of -the globular chamber forming the eye (see <a href="#Fig305">fig. 305</a>). -This interior wall is called the retina, and upon it the -impressions of external objects are received, just as -they are received upon a screen in a dark chamber. -These impressions are conveyed by the optic nerve -from the retina to the brain.</p> - -<p>In front of the pupil is a segment of a small -sphere, composed of the cornea and the aqueous -humor, both of which are transparent, and from their -shape and density have a convergent effect upon the -rays passing through them.</p> - -<p>Behind the pupil is the transparent crystalline lens, -which, from its shape and its elasticity, is a powerful -agent in aiding the convergence of the rays, and in -bringing objects at various distances to a clear focus -upon the retina.</p> - -<div class="container w40em" id="Fig305"> -<img src="images/illo253b.png" alt="Eye" /> -<p class="caption">Fig. 305.</p> -</div> - -<p>The pupil has the power of contraction and dilation, -which is influenced by the quantity of light entering -the eye, but when it is dilated to the utmost its<span class="pagenum" id="Page254">[254]</span> -size is very small in comparison with the great chamber -forming the body of the eye.</p> - -<p>In <a href="#Fig305">fig. 305</a> we have a rough sectional diagram of -the eye and an object in front of it. This object, an -arrow, is seen by means of the visual rays proceeding -from it, the principal two of which are shown. The -visual ray from <i>A</i> passes through the pupil and is -received upon the retina at <i>a</i>. In the same way the -visual ray from <i>B</i> passes through the pupil and is -received upon the retina at <i>b</i>. It will thus be seen -that the impressions or images received upon the -retina are inverted; but, by long reason and experience, -the mind has acquired the habit of determining -the real positions of objects, and does not, though -the image is so received, imagine them to be upside -down.</p> - -<p>It will also be observed, in the same way, that that -portion of an object which is upon the right will be -pictured upon the retina upon the left, and <i>vice versa</i>, -but the mind, for the reasons before stated, never -imagines the object to be reversed. This fact is -another proof that, as mentioned at the commencement -of our study, to see accurately is a matter of education -and practice.</p> - -<p>And first of Optics; it was asserted, <a href="#Page252">page 252</a>, that -we see by the agency of light which passes from objects -to our eyes in straight lines which are called Visual -Rays.</p> - -<p>We see by the agency of light, as all objects, -except such as may be styled self-luminous, when -placed in a dark chamber are not perceivable by us, -except by touch, smell or hearing; we cannot <i>see</i> -them; they are invisible. But when, by removing a -shutter or igniting a flame, we introduce something to -the chamber which was not present when the chamber -was dark, we become at once conscious of the appearance -of the object, we perceive it by the sense of sight.</p> - -<p>This something which must always be present to -enable us to see, is called Light; all objects are made -visible to the sense of seeing by its agency.</p> - -<p><span class="pagenum" id="Page255">[255]</span></p> - -<p>Without light, natural or artificial, it would be -impossible to distinguish one object from another.</p> - -<div class="container w30em" id="Fig306"> -<img src="images/illo255.jpg" alt="Experiment" /> -<p class="caption">Fig. 306.</p> -</div> - -<p>That the Visual Rays pass from objects in straight -lines to the eye may be proved by the following -experiment (see <a href="#Fig306">fig. 306</a>):—Pierce two screens with a -large pin, and place them so that the holes are in a -straight line with a flame, as the light of a candle or -lamp. On fixing the eye to one of these holes we are -able to see the flame; but if we slightly move the -flame, one of the screens, or the eye, the flame is no -longer visible. To be visible, the flame, the holes in -the screens, and the eye must all be in the same straight -line. See <a href="#Fig306">fig. 306</a>.</p> - -<p>In <a href="#Fig299">fig. 299</a> the picture plane is represented by -the rectangle <i>W X Y Z</i>. Although the picture plane -is here shown as a rectangle, it may be of any shape -or of any size.</p> - -<p>The observer is at <i>S</i>, looking through the picture -plane at the cross <i>R C O H</i>. The observer is standing -upon a horizontal surface, which is called the ground -plane. If we are in a room, the window may be called -a picture plane and the floor a ground plane.</p> - -<p>The picture plane rests, as it were, upon the -ground plane, in a line which passes from <i>Y</i> to <i>Z</i>. The<span class="pagenum" id="Page256">[256]</span> -two planes meet or intersect in this line, which is called -the ground line. The ground line is sometimes called -the picture line, or the measuring line.</p> - -<p>The visual rays, by means of which the observer -sees the cross, will, in their course from it to the eye, -pass through the picture plane. These visual rays will -intersect the picture plane in a number of points, and -if we mark the true positions of these points the result -will be a perspective image of the cross.</p> - -<p>The rays are shown passing from the cross to the -eye of the observer, and meeting the picture plane in -points <i>r</i>, <i>c</i>, <i>o</i>, <i>h</i>; <i>r</i> being joined to <i>o</i>, and <i>c</i> to <i>h</i>, we -have the perspective image of the cross as it would -appear to the observer at <i>S</i>. Of course an infinite -number of rays proceed from the cross to the eye -of the observer; but it is quite evident that we need -only consider those proceeding from the extremities of -the object.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page257">[257]</span></p> - -<h2 class="nobreak">Scale or Approximate Perspective.</h2> - -</div><!--chapter--> - -<p>Real, or true perspective, represents the object exactly as it is seen in nature, where the parts that are -far away from the eye of the observer appear smaller than those nearby. Occasions arise, however, in practical -life, with its numerous phases of industrial requirements, where the convenience of showing the complete form -of the object in a single view might preferably be coupled with the convenience of scale dimensions.</p> - -<p>This has led to a modified perspective, that sacrifices -some of the accuracy in the appearance of the -object to gain the advantage of scale dimensions; this -form of perspective may be distinguished by the -name—<i>approximate or scale perspective</i>—which does not -represent the object exactly as seen in nature, but -where those parts that are afar off are shown of the -same size as those that are near by, and where the -lines that run out into space are parallel to each other -and do not converge into a vanishing point.</p> - -<p>To represent an object in perspective, the horizon -and the point of vision will have to appear in the -drawing as the fundamental starting points.</p> - -<p>Three dimensions are distinguished for the fixing -of an object in space from a certain reference point. -They are height, breadth and thickness, and are in -their direction square to each other. The height is the -fundamental direction, being derived from the direction -of gravity, that invariably extends to the center of -the earth.</p> - -<p>All directions in the perspective determination of -an object are parallel to these.</p> - -<p>Vertical lines and planes point toward the center -of the earth, while horizontal planes, including the -directions of breadth and thickness, are square to the -vertical direction. In this, the principal visual ray -extends in the direction of thickness.</p> - -<p><span class="pagenum" id="Page258">[258]</span></p> - -<p>For a clear understanding of perspective, it must be firmly fixed in mind, that for each prominent point of -the object behind the picture plane, a corresponding point lies in the picture plane, in that position where a -straight line or ray of sight that is going -from the eye to the point of the object, -cuts through the picture plane.</p> - -<p>Suppose we could replace these rays -of sight by thin, visible threads of wire -that would go through little holes in -the picture plane, we could then walk -around this bundle of rays, and by looking -at it from three different directions, -we would get three different views of -it. We may look upon it from the top, -from the side or from the end, where the -bundle of rays all concentrate in the eye -of the observer.</p> - -<div class="container" id="Fig307"> -<img src="images/illo258.png" alt="Viewpoints" /> -<p class="caption">Fig. 307.</p> -</div> - -<p><a href="#Fig307">Figs. 307</a> and <a href="#Fig308">308</a> show, in two cases, how these three -views would appear. The end views are those where -the perspective picture appears on the plane, while the top and side views only show where the rays intersect -the picture plane. The top view shows how far, for example, point <i>A</i> is distant from -a vertical line <i>O Z</i>, while<span class="pagenum" id="Page259">[259]</span> -the side view shows how far point <i>A</i> is below horizontal line <i>O X</i>, which is at the same height above the -ground as the eye of the observer, <i>O</i>. Thus, all points of the cube can be located on the picture plane, and the -outlines of the cube reproduced in perspective.</p> - -<div class="container" id="Fig308"> -<img src="images/illo259.png" alt="Viewpoints" /> -<p class="caption">Fig. 308.</p> -</div> - -<p>Modified arrangements are shown in <a href="#Fig309">figs. 309</a> and -<a href="#Fig310">310</a> for parallel and angular perspective.</p> - -<p><span class="pagenum" id="Page260">[260]</span></p> - -<div class="container w30em" id="Fig309"> -<img src="images/illo260a.png" alt="Perspective" /> -<p class="caption">Fig. 309.</p> -</div> - -<p>The views are so arranged in relation to each other -that the picture plane in the top view is parallel to the -horizon and the ground-line, which latter is the intersection -of the picture plane with the level ground of -the end or perspective view. At the same time the -eye of the observer is in one and the same vertical line -for both views, two vanishing points may be found in -the horizon outside of the principal visual ray. To -find the position of these two vanishing points in -the picture plane, the modified top view, <a href="#Fig310">fig. 310</a>, is -used.</p> - -<div class="container w40em" id="Fig310"> -<img src="images/illo260b.png" alt="Perspective" /> -<p class="caption">Fig. 310.</p> -</div> - -<p><span class="pagenum" id="Page261">[261]</span></p> - -<p>As all lines that end in a vanishing point must be -parallel in reality, this parallelism may be seen in the -top view and lines through the eye of the observer, -parallel to the directions of the main lines of the object, -will cut the picture plane at the vanishing points.</p> - -<p>Through these two vanishing points the directions -of two sets of lines are found, the starting points of -which are determined from the plane of measurement. -The third set of lines, being vertical, also appears vertical -and parallel in the picture.</p> - -<p>The position of each vertical line is found in the -top view, where the light rays from the observing eye -to the ends of the vertical lines intersect with the -picture plane. Projecting these points down upon the -rays to the vanishing points produces the vertical lines -in the picture.</p> - -<p>For example, in <a href="#Fig311">fig. 311</a>, the purpose of perspective -is entirely defeated by placing the eye of the observer -directly in front of the object and arriving at the view -taken in mechanical drawing which needs supplementary -views for complete comprehension of the form of -the object.</p> - -<div class="container w40em" id="Fig311"> -<img src="images/illo261.png" alt="Defeated perspective" /> -<p class="caption">Fig. 311.</p> -</div> - -<p>In <a href="#Fig312">fig. 312</a> the eye of the observer is first placed directly -opposite the object, then it sees the object to the -left but a short distance away, while in the third figure -the observer is farther away from -the object. In each case the -picture plane and plane of measurement -is at the front face of -the cube.</p> - -<p><span class="pagenum" id="Page262">[262]</span></p> - -<div class="container" id="Fig312"> -<img src="images/illo262.png" alt="Perspective" /> -<p class="caption">Fig. 312.</p> -</div> - -<p><span class="pagenum" id="Page263">[263]</span></p> - -<div class="container w40em"> -<img src="images/illo263.png" alt="Perspective" /> -<p class="caption">Fig. 312 (second part).</p> -</div> - -<p>For such simple objects, it is -not necessary to draw the top view -at all. The only reminder of the -top view is the eye or point of -vision, the picture plane that falls -together for the sake of convenience -with the horizon of the end -view and the ray that determines -the measurement point <i>M</i>, which -is, in this suppressed reproduction, -absolutely necessary, in order to -find the apparent position of the -real corners behind the picture -plane.</p> - -<p><span class="pagenum" id="Page264">[264]</span></p> - -<p>So far, only square or sharp-cornered objects have -been represented in perspective.</p> - -<p>It is evident, however, that round objects can also -be shown in linear perspective, placing reference lines -on the object and representing these as if they were real -lines. A cylinder is thus shown in <a href="#Fig313">fig. 313</a> of which the -end planes will appear very distinctly in sharp outlines.</p> - -<div class="container w30em" id="Fig313"> -<img src="images/illo264.png" alt="Cylinder" /> -<p class="caption">Fig. 313.</p> -</div> - -<p>Vertically, only the outlines of the cylinder, as contrasted -against space, will appear as distinct outlines, -while the reference lines will not appear and are therefore -shown only as dotted lines.</p> - -<p><a href="#Fig314">Fig. 314</a> shows the approximate or scale perspective -with all the axes drawn and the corresponding angles -and scales marked. The outlines of the object running -in these directions appear all parallel to the axes.</p> - -<p>The approximate or scale perspective completely -avoids all the difficulties of choosing a point of sight, -of having several views, vanishing points and measurement -points, and thus offers a representative view, with -a great saving of time and labor. Particularly for -mechanical purposes, where an artistic impression is -not called for, it presents a distinct advantage over the -true or real perspective.</p> - -<p><span class="pagenum" id="Page265">[265]</span></p> - -<div class="container" id="Fig314"> -<img src="images/illo265.png" alt="Perspective" /> -<p class="caption">Fig. 314.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page266">[266-<br />267]</span><a id="Page267"></a></p> - -<div class="container w30em"> -<img src="images/illo267.png" alt="TABLES AND INDEX" /> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page268">[268]</span></p> - -<div class="container w20em"> -<img src="images/illo268.png" alt="" /> -<p class="caption">MARINERS’ COMPASS.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page269">[269]</span></p> - -<h2 class="nobreak">Useful Tables for Draughtsmen.</h2> - -</div><!--chapter--> - -<h3 class="center">TABLE OF DECIMAL EQUIVALENTS.<br /> -8ths, 16ths, 32ds and 64ths of an Inch.</h3> - -<table class="fracdec" summary="Decimal fractions"> - -<tr> -<td colspan="3" class="denom">8ths.</td> -</tr> - -<tr> -<td class="fraction"><sup>1</sup>⁄<sub>8</sub></td> -<td class="equals">=</td> -<td class="decimal">.125</td> -</tr> - -<tr> -<td class="fraction"><sup>1</sup>⁄<sub>4</sub></td> -<td class="equals">=</td> -<td class="decimal">.250</td> -</tr> - -<tr> -<td class="fraction"><sup>3</sup>⁄<sub>8</sub></td> -<td class="equals">=</td> -<td class="decimal">.375</td> -</tr> - -<tr> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub></td> -<td class="equals">=</td> -<td class="decimal">.500</td> -</tr> - -<tr> -<td class="fraction"><sup>5</sup>⁄<sub>8</sub></td> -<td class="equals">=</td> -<td class="decimal">.625</td> -</tr> - -<tr> -<td class="fraction"><sup>3</sup>⁄<sub>4</sub></td> -<td class="equals">=</td> -<td class="decimal">.750</td> -</tr> - -<tr> -<td class="fraction"><sup>7</sup>⁄<sub>8</sub></td> -<td class="equals">=</td> -<td class="decimal">.875</td> -</tr> - -<tr> -<td colspan="3" class="denom">16ths.</td> -</tr> - -<tr> -<td class="fraction"><sup>1</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.0625</td> -</tr> - -<tr> -<td class="fraction"><sup>3</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.1875</td> -</tr> - -<tr> -<td class="fraction"><sup>5</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.3125</td> -</tr> - -<tr> -<td class="fraction"><sup>7</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.4375</td> -</tr> - -<tr> -<td class="fraction"><sup>9</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.5625</td> -</tr> - -<tr> -<td class="fraction"><sup>11</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.6875</td> -</tr> - -<tr> -<td class="fraction"><sup>13</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.8125</td> -</tr> - -<tr> -<td class="fraction"><sup>15</sup>⁄<sub>16</sub></td> -<td class="equals">=</td> -<td class="decimal">.9375</td> -</tr> - -<tr> -<td colspan="3" class="denom">32nds.</td> -</tr> - -<tr> -<td class="fraction"><sup>1</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.03125</td> -</tr> - -<tr> -<td class="fraction"><sup>3</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.09375</td> -</tr> - -<tr> -<td class="fraction"><sup>5</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.15625</td> -</tr> - -<tr> -<td class="fraction"><sup>7</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.21875</td> -</tr> - -<tr> -<td class="fraction"><sup>9</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.28125</td> -</tr> - -<tr> -<td class="fraction"><sup>11</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.34375</td> -</tr> - -<tr> -<td class="fraction"><sup>13</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.40625</td> -</tr> - -<tr> -<td class="fraction"><sup>15</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.46875</td> -</tr> - -<tr> -<td class="fraction"><sup>17</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.53125</td> -</tr> - -<tr> -<td class="fraction"><sup>19</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.59375</td> -</tr> - -<tr> -<td class="fraction"><sup>21</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.65625</td> -</tr> - -<tr> -<td class="fraction"><sup>23</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.71875</td> -</tr> - -<tr> -<td class="fraction"><sup>25</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.78125</td> -</tr> - -<tr> -<td class="fraction"><sup>27</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.84375</td> -</tr> - -<tr> -<td class="fraction"><sup>29</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.90625</td> -</tr> - -<tr> -<td class="fraction"><sup>31</sup>⁄<sub>32</sub></td> -<td class="equals">=</td> -<td class="decimal">.96875</td> -</tr> - -<tr> -<td colspan="3" class="denom">64ths.</td> -</tr> - -<tr> -<td class="fraction"><sup>1</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.015625</td> -</tr> - -<tr> -<td class="fraction"><sup>3</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.046875</td> -</tr> - -<tr> -<td class="fraction"><sup>5</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.078125</td> -</tr> - -<tr> -<td class="fraction"><sup>7</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.109375</td> -</tr> - -<tr> -<td class="fraction"><sup>9</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.140625</td> -</tr> - -<tr> -<td class="fraction"><sup>11</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.171875</td> -</tr> - -<tr> -<td class="fraction"><sup>13</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.203125</td> -</tr> - -<tr> -<td class="fraction"><sup>15</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.234375</td> -</tr> - -<tr> -<td class="fraction"><sup>17</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.265625</td> -</tr> - -<tr> -<td class="fraction"><sup>19</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.296875</td> -</tr> - -<tr> -<td class="fraction"><sup>21</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.328125</td> -</tr> - -<tr> -<td class="fraction"><sup>23</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.359375</td> -</tr> - -<tr> -<td class="fraction"><sup>25</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.390625</td> -</tr> - -<tr> -<td class="fraction"><sup>27</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.421875</td> -</tr> - -<tr> -<td class="fraction"><sup>29</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.453125</td> -</tr> - -<tr> -<td class="fraction"><sup>31</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.484375</td> -</tr> - -<tr> -<td class="fraction"><sup>33</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.515625</td> -</tr> - -<tr> -<td class="fraction"><sup>35</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.546875</td> -</tr> - -<tr> -<td class="fraction"><sup>37</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.578125</td> -</tr> - -<tr> -<td class="fraction"><sup>39</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.609375</td> -</tr> - -<tr> -<td class="fraction"><sup>41</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.640625</td> -</tr> - -<tr> -<td class="fraction"><sup>43</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.671875</td> -</tr> - -<tr> -<td class="fraction"><sup>45</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.703125</td> -</tr> - -<tr> -<td class="fraction"><sup>47</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.734375</td> -</tr> - -<tr> -<td class="fraction"><sup>49</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.765625</td> -</tr> - -<tr> -<td class="fraction"><sup>51</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.796875</td> -</tr> - -<tr> -<td class="fraction"><sup>53</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.828125</td> -</tr> - -<tr> -<td class="fraction"><sup>55</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.859375</td> -</tr> - -<tr> -<td class="fraction"><sup>57</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.890625</td> -</tr> - -<tr> -<td class="fraction"><sup>59</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.921875</td> -</tr> - -<tr> -<td class="fraction"><sup>61</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.953125</td> -</tr> - -<tr> -<td class="fraction"><sup>63</sup>⁄<sub>64</sub></td> -<td class="equals">=</td> -<td class="decimal">.984375</td> -</tr> - -</table> - -<p><span class="pagenum" id="Page270">[270]</span></p> - -<h3 class="center">TABLE OF DECIMAL EQUIVALENTS<br /> -Of Millimeters and Fractions of Millimeters.</h3> - -<table class="fracdec" summary="Millimeters"> - -<tr> -<th><i>mm.</i></th> -<th> </th> -<th><i>Inches.</i></th> -</tr> - -<tr> -<td class="mm"><sup>1</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00079</td> -</tr> - -<tr> -<td class="mm"><sup>2</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00157</td> -</tr> - -<tr> -<td class="mm"><sup>3</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00236</td> -</tr> - -<tr> -<td class="mm"><sup>4</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00315</td> -</tr> - -<tr> -<td class="mm"><sup>5</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00394</td> -</tr> - -<tr> -<td class="mm"><sup>6</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00472</td> -</tr> - -<tr> -<td class="mm"><sup>7</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00551</td> -</tr> - -<tr> -<td class="mm"><sup>8</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00630</td> -</tr> - -<tr> -<td class="mm"><sup>9</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00709</td> -</tr> - -<tr> -<td class="mm"><sup>10</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00787</td> -</tr> - -<tr> -<td class="mm"><sup>11</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00866</td> -</tr> - -<tr> -<td class="mm"><sup>12</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.00945</td> -</tr> - -<tr> -<td class="mm"><sup>13</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01024</td> -</tr> - -<tr> -<td class="mm"><sup>14</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01102</td> -</tr> - -<tr> -<td class="mm"><sup>15</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01181</td> -</tr> - -<tr> -<td class="mm"><sup>16</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01260</td> -</tr> - -<tr> -<td class="mm"><sup>17</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01339</td> -</tr> - -<tr> -<td class="mm"><sup>18</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01417</td> -</tr> - -<tr> -<td class="mm"><sup>19</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01496</td> -</tr> - -<tr> -<td class="mm"><sup>20</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01575</td> -</tr> - -<tr> -<td class="mm"><sup>21</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01654</td> -</tr> - -<tr> -<td class="mm"><sup>22</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01732</td> -</tr> - -<tr> -<td class="mm"><sup>23</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01811</td> -</tr> - -<tr> -<td class="mm"><sup>24</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01890</td> -</tr> - -<tr> -<td class="mm"><sup>25</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.01969</td> -</tr> - -<tr> -<td class="mm"><sup>26</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02047</td> -</tr> - -<tr> -<td class="mm"><sup>27</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02126</td> -</tr> - -<tr> -<td class="mm"><sup>28</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02205</td> -</tr> - -<tr> -<td class="mm"><sup>29</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02283</td> -</tr> - -<tr> -<td class="mm"><sup>30</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02362</td> -</tr> - -<tr> -<td class="mm"><sup>31</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02441</td> -</tr> - -<tr> -<td class="mm"><sup>32</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02520</td> -</tr> - -<tr> -<td class="mm"><sup>33</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02598</td> -</tr> - -<tr> -<td class="mm"><sup>34</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02677</td> -</tr> - -<tr> -<td class="mm"><sup>35</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02756</td> -</tr> - -<tr> -<td class="mm"><sup>36</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02835</td> -</tr> - -<tr> -<td class="mm"><sup>37</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02913</td> -</tr> - -<tr> -<td class="mm"><sup>38</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.02992</td> -</tr> - -<tr> -<td class="mm"><sup>39</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03071</td> -</tr> - -<tr> -<td class="mm"><sup>40</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03150</td> -</tr> - -<tr> -<td class="mm"><sup>41</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03228</td> -</tr> - -<tr> -<td class="mm"><sup>42</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03307</td> -</tr> - -<tr> -<td class="mm"><sup>43</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03386</td> -</tr> - -<tr> -<td class="mm"><sup>44</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03465</td> -</tr> - -<tr> -<td class="mm"><sup>45</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03543</td> -</tr> - -<tr> -<td class="mm"><sup>46</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03622</td> -</tr> - -<tr> -<td class="mm"><sup>47</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03701</td> -</tr> - -<tr> -<td class="mm"><sup>48</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03780</td> -</tr> - -<tr> -<td class="mm"><sup>49</sup>⁄<sub>50</sub></td> -<td class="equals">=</td> -<td class="inch">.03858</td> -</tr> - -<tr> -<td class="mm">1</td> -<td class="equals">=</td> -<td class="inch">.03937</td> -</tr> - -<tr> -<td class="mm">2</td> -<td class="equals">=</td> -<td class="inch">.07874</td> -</tr> - -<tr> -<td class="mm">3</td> -<td class="equals">=</td> -<td class="inch">.11811</td> -</tr> - -<tr> -<td class="mm">4</td> -<td class="equals">=</td> -<td class="inch">.15748</td> -</tr> - -<tr> -<td class="mm">5</td> -<td class="equals">=</td> -<td class="inch">.19685</td> -</tr> - -<tr> -<td class="mm">6</td> -<td class="equals">=</td> -<td class="inch">.23622</td> -</tr> - -<tr> -<td class="mm">7</td> -<td class="equals">=</td> -<td class="inch">.27559</td> -</tr> - -<tr> -<td class="mm">8</td> -<td class="equals">=</td> -<td class="inch">.31496</td> -</tr> - -<tr> -<td class="mm">9</td> -<td class="equals">=</td> -<td class="inch">.35433</td> -</tr> - -<tr> -<td class="mm">10</td> -<td class="equals">=</td> -<td class="inch">.39370</td> -</tr> - -<tr> -<td class="mm">11</td> -<td class="equals">=</td> -<td class="inch">.43307</td> -</tr> - -<tr> -<td class="mm">12</td> -<td class="equals">=</td> -<td class="inch">.47244</td> -</tr> - -<tr> -<td class="mm">13</td> -<td class="equals">=</td> -<td class="inch">.51181</td> -</tr> - -<tr> -<td class="mm">14</td> -<td class="equals">=</td> -<td class="inch">.55118</td> -</tr> - -<tr> -<td class="mm">15</td> -<td class="equals">=</td> -<td class="inch">.59055</td> -</tr> - -<tr> -<td class="mm">16</td> -<td class="equals">=</td> -<td class="inch">.62992</td> -</tr> - -<tr> -<td class="mm">17</td> -<td class="equals">=</td> -<td class="inch">.66929</td> -</tr> - -<tr> -<td class="mm">18</td> -<td class="equals">=</td> -<td class="inch">.70866</td> -</tr> - -<tr> -<td class="mm">19</td> -<td class="equals">=</td> -<td class="inch">.74803</td> -</tr> - -<tr> -<td class="mm">20</td> -<td class="equals">=</td> -<td class="inch">.78740</td> -</tr> - -<tr> -<td class="mm">21</td> -<td class="equals">=</td> -<td class="inch">.82677</td> -</tr> - -<tr> -<td class="mm">22</td> -<td class="equals">=</td> -<td class="inch">.86614</td> -</tr> - -<tr> -<td class="mm">23</td> -<td class="equals">=</td> -<td class="inch">.90551</td> -</tr> - -<tr> -<td class="mm">24</td> -<td class="equals">=</td> -<td class="inch">.94488</td> -</tr> - -<tr> -<td class="mm">25</td> -<td class="equals">=</td> -<td class="inch">.98425</td> -</tr> - -<tr> -<td class="mm">26</td> -<td class="equals">=</td> -<td class="inch">1.02362</td> -</tr> - -</table> - -<table class="fracdec" summary="Units"> - -<tr> -<td class="inch">10 mm.</td> -<td class="equals">=</td> -<td class="center">1</td> -<td class="inch">Centimeter</td> -<td class="equals">=</td> -<td class="center">0.3937</td> -<td class="inch">inches.</td> -</tr> - -<tr> -<td class="inch">10 cm.</td> -<td class="equals">=</td> -<td class="center">1</td> -<td class="inch">Decimeter</td> -<td class="equals">=</td> -<td class="center">3.937</td> -<td class="center">„</td> -</tr> - -<tr> -<td class="inch">10 dm.</td> -<td class="equals">=</td> -<td class="center">1</td> -<td class="inch">Meter</td> -<td class="equals">=</td> -<td class="center">39.37</td> -<td class="center">„</td> -</tr> - -<tr> -<td class="inch">25.4 mm.</td> -<td class="equals">=</td> -<td colspan="5" class="inch">1 English Inch.</td> -</tr> - -</table> - -<p><span class="pagenum" id="Page271">[271]</span></p> - -<h3 class="center">RULES RELATIVE TO THE CIRCLE.</h3> - -<p class="center highline4">The circle contains a greater area than any other plane figure bounded by -an equal perimeter or outline.</p> - -<p class="findwhat">TO FIND <span class="nowrap">CIRCUMFERENCE—</span></p> - -<table class="circle" summary="Properties"> - -<tr> -<td class="text">Multiply diameter by</td> -<td class="number">3.1416.</td> -</tr> - -<tr> -<td class="text">Or divide diameter by</td> -<td class="number">0.3183.</td> -</tr> - -</table> - -<p class="findwhat">TO FIND <span class="nowrap">DIAMETER—</span></p> - -<table class="circle" summary="Properties"> - -<tr> -<td class="text">Multiply circumference by</td> -<td class="number">0.3183.</td> -</tr> - -<tr> -<td class="text">Or divide circumference by</td> -<td class="number">3.1416.</td> -</tr> - -</table> - -<p class="findwhat">TO FIND <span class="nowrap">RADIUS—</span></p> - -<table class="circle" summary="Properties"> - -<tr> -<td class="text">Multiply circumference by</td> -<td class="number">0.15915.</td> -</tr> - -<tr> -<td class="text">Or divide circumference by</td> -<td class="number">6.28318.</td> -</tr> - -</table> - -<p class="findwhat">TO FIND SIDE OF AN INSCRIBED <span class="nowrap">SQUARE—</span></p> - -<table class="circle" summary="Properties"> - -<tr> -<td class="text">Multiply diameter by</td> -<td class="number">0.7071.</td> -</tr> - -<tr> -<td class="text">Or multiply circumference by</td> -<td class="number">0.2251.</td> -</tr> - -<tr> -<td class="text">Or divide circumference by</td> -<td class="number">4.4428.</td> -</tr> - -</table> - -<p class="findwhat">TO FIND SIDE OF AN EQUAL <span class="nowrap">SQUARE—</span></p> - -<table class="circle" summary="Properties"> - -<tr> -<td class="text">Multiply diameter by</td> -<td class="number">0.8862.</td> -</tr> - -<tr> -<td class="text">Or divide diameter by</td> -<td class="number">1.1284.</td> -</tr> - -<tr> -<td class="text">Or multiply circumference by</td> -<td class="number">0.2821.</td> -</tr> - -<tr> -<td class="text">Or divide circumference by</td> -<td class="number">3.545.</td> -</tr> - -</table> - -<p class="findwhat">SQUARE—</p> - -<table class="circle" summary="Properties"> - -<tr> -<td class="text">A side multiplied by</td> -<td colspan="3" class="number">1.4142 equals diameter of its circumscribing circle.</td> -</tr> - -<tr> -<td class="text">A side multiplied by</td> -<td colspan="3" class="number">4.443 equals circumference of its circumscribing circle.</td> -</tr> - -<tr> -<td class="text">A side multiplied by</td> -<td class="number">1.128 equals diameter</td> -<td rowspan="3" class="text"><span class="fsize300">}</span></td> -<td rowspan="3" class="text">of an<br />equal<br />circle.</td> -</tr> - -<tr> -<td class="text">A side multiplied by</td> -<td class="number">3.545 equals circumference</td> -</tr> - -<tr> -<td class="text">A side multiplied by</td> -<td class="number">1.273 equals circle inches</td> -</tr> - -</table> - -<p class="findwhat">TO FIND THE AREA OF A <span class="nowrap">CIRCLE—</span></p> - -<table class="circle" summary="Properties"> - -<tr> -<td colspan="2" class="text">Multiply circumference by one-quarter of the diameter.</td> -</tr> - -<tr> -<td class="text">Or multiply the square of diameter by</td> -<td class="number">0.7854.</td> -</tr> - -<tr> -<td class="text">Or multiply the square of circumference by</td> -<td class="number"> .07958.</td> -</tr> - -<tr> -<td class="text">Or multiply the square of <sup>1</sup>⁄<sub>2</sub> diameter by</td> -<td class="number">3.1416.</td> -</tr> - -</table> - -<p>Contents of cylinder = area of end × length. Contents of wedge = area of base × -<sup>1</sup>⁄<sub>2</sub> altitude. Surface of cylinder = area of -both ends × length × circumference. Surface of sphere = diameter squared × 3.1416, -or = diameter × circumference. Contents of -sphere = diameter cubed × .5236. Contents of pyramid or cone, right or oblique, -regular or irregular = area of base × <sup>1</sup>⁄<sub>3</sub> altitude. Area -of triangle = base × <sup>1</sup>⁄<sub>2</sub> altitude. Area of parallelogram -= base × altitude. Area of trapezoid = altitude × <sup>1</sup>⁄<sub>2</sub> the sum of parallel sides.</p> - -<p><span class="pagenum" id="Page272">[272]</span></p> - -<h3>ROMAN TABLE.</h3> - -<table class="roman" summary="numbers"> - -<tr> -<td class="number">I.</td> -<td class="equals">denotes</td> -<td class="text">One.</td> -</tr> - -<tr> -<td class="number">II.</td> -<td class="equals">„</td> -<td class="text">Two.</td> -</tr> - -<tr> -<td class="number">III.</td> -<td class="equals">„</td> -<td class="text">Three.</td> -</tr> - -<tr> -<td class="number">IV.</td> -<td class="equals">„</td> -<td class="text">Four.</td> -</tr> - -<tr> -<td class="number">V.</td> -<td class="equals">„</td> -<td class="text">Five.</td> -</tr> - -<tr> -<td class="number">VI.</td> -<td class="equals">„</td> -<td class="text">Six.</td> -</tr> - -<tr> -<td class="number">VII.</td> -<td class="equals">„</td> -<td class="text">Seven.</td> -</tr> - -<tr> -<td class="number">VIII.</td> -<td class="equals">„</td> -<td class="text">Eight.</td> -</tr> - -<tr> -<td class="number">IX.</td> -<td class="equals">„</td> -<td class="text">Nine.</td> -</tr> - -<tr> -<td class="number">X.</td> -<td class="equals">„</td> -<td class="text">Ten.</td> -</tr> - -<tr> -<td class="number">XI.</td> -<td class="equals">„</td> -<td class="text">Eleven.</td> -</tr> - -<tr> -<td class="number">XII.</td> -<td class="equals">„</td> -<td class="text">Twelve.</td> -</tr> - -<tr> -<td class="number">XIII.</td> -<td class="equals">„</td> -<td class="text">Thirteen.</td> -</tr> - -<tr> -<td class="number">XIV.</td> -<td class="equals">„</td> -<td class="text">Fourteen.</td> -</tr> - -<tr> -<td class="number">XV.</td> -<td class="equals">„</td> -<td class="text">Fifteen.</td> -</tr> - -<tr> -<td class="number">XVI.</td> -<td class="equals">„</td> -<td class="text">Sixteen.</td> -</tr> - -<tr> -<td class="number">XVII.</td> -<td class="equals">„</td> -<td class="text">Seventeen.</td> -</tr> - -<tr> -<td class="number">XVIII.</td> -<td class="equals">„</td> -<td class="text">Eighteen.</td> -</tr> - -<tr> -<td class="number">XIX.</td> -<td class="equals">„</td> -<td class="text">Nineteen.</td> -</tr> - -<tr> -<td class="number">XX.</td> -<td class="equals">„</td> -<td class="text">Twenty.</td> -</tr> - -<tr> -<td class="number">XXX.</td> -<td class="equals">„</td> -<td class="text">Thirty.</td> -</tr> - -<tr> -<td class="number">XL.</td> -<td class="equals">„</td> -<td class="text">Forty.</td> -</tr> - -<tr> -<td class="number">L.</td> -<td class="equals">„</td> -<td class="text">Fifty.</td> -</tr> - -<tr> -<td class="number">LX.</td> -<td class="equals">„</td> -<td class="text">Sixty.</td> -</tr> - -<tr> -<td class="number">LXX.</td> -<td class="equals">„</td> -<td class="text">Seventy.</td> -</tr> - -<tr> -<td class="number">LXXX.</td> -<td class="equals">„</td> -<td class="text">Eighty.</td> -</tr> - -<tr> -<td class="number">XC.</td> -<td class="equals">„</td> -<td class="text">Ninety.</td> -</tr> - -<tr> -<td class="number">C.</td> -<td class="equals">„</td> -<td class="text">One hundred.</td> -</tr> - -<tr> -<td class="number">D.</td> -<td class="equals">„</td> -<td class="text">Five hundred.</td> -</tr> - -<tr> -<td class="number">M.</td> -<td class="equals">„</td> -<td class="text">One thousand.</td> -</tr> - -<tr> -<td class="number">X̅.</td> -<td class="equals">„</td> -<td class="text">Ten thousand.</td> -</tr> - -<tr> -<td class="number">M̅.</td> -<td class="equals">„</td> -<td class="text">One million.</td> -</tr> - -</table> - -<h3>SOLID MEASURE, OR CUBIC MEASURE.</h3> - -<p>This is used in measuring bodies, or things having -length, breadth and height or depth.</p> - -<p class="tabhead">TABLE.</p> - -<table class="measures" summary="Measures"> - -<tr> -<td class="number">1728</td> -<td class="text">cubic inches (cu. in.)</td> -<td class="equals">make</td> -<td class="text">1 cubic foot (cu. ft.).</td> -</tr> - -<tr> -<td class="number">27</td> -<td class="text">cubic feet,</td> -<td class="equals">„</td> -<td class="text">1 cubic yard (cu. yd.).</td> -</tr> - -<tr> -<td class="number">128</td> -<td class="text">cubic feet,</td> -<td class="equals">„</td> -<td class="text">1 cord (C.).</td> -</tr> - -</table> - -<h3>CIRCULAR MEASURE.</h3> - -<table class="measures" summary="Measures"> - -<tr> -<td class="number">60</td> -<td class="text">seconds (″)</td> -<td class="equals">make</td> -<td class="text">1 minute (′).</td> -</tr> - -<tr> -<td class="number">60</td> -<td class="text">minutes</td> -<td class="equals">„</td> -<td class="text">1 degree (°).</td> -</tr> - -<tr> -<td class="number">360</td> -<td class="text">degrees</td> -<td class="equals">„</td> -<td class="text">1 circum. (C.).</td> -</tr> - -</table> - -<p>The circumference of every circle whatever, is -supposed to be divided into 360 equal parts, called -<i>degrees</i>.</p> - -<p>A degree is <sup>1</sup>⁄<sub>360</sub> of the circumference of any circle, -small or large.</p> - -<p>A quadrant is a fourth of a circumference, or an -arc of 90 degrees.</p> - -<p>A degree is divided into 60 parts called minutes, -expressed by the sign (′), and each minute is divided -into 60 seconds, expressed by (″); so that the circumference -of any circle contains 21,600 minutes, or -1,296,000 seconds.</p> - -<h3>LONG MEASURE—MEASURES OF LENGTH.</h3> - -<table class="measures" summary="Measures"> - -<tr> -<td class="number nomargin">12</td> -<td rowspan="2"> </td> -<td class="text">inches</td> -<td class="equals">=</td> -<td class="text">1 foot.</td> -</tr> - -<tr> -<td class="number nomargin">3</td> -<td class="text">feet</td> -<td class="equals">=</td> -<td class="text">1 yard.</td> -</tr> - -<tr> -<td class="number nomargin">5</td> -<td class="text"><sup>1</sup>⁄<sub>2</sub> </td> -<td class="text">yards</td> -<td class="equals">=</td> -<td class="text">1 rod.</td> -</tr> - -<tr> -<td class="number nomargin">40</td> -<td rowspan="3"> </td> -<td class="text">rods</td> -<td class="equals">=</td> -<td class="text">1 furlong.</td> -</tr> - -<tr> -<td class="number nomargin">8</td> -<td class="text">furlongs </td> -<td class="equals">=</td> -<td class="text">1 common mile.</td> -</tr> - -<tr> -<td class="number nomargin">3</td> -<td class="text">miles</td> -<td class="equals">=</td> -<td class="text">1 league.</td> -</tr> - -</table> - -<p>The mile (5,280 feet) of the above table is the -legal mile of the United States and England, and is -called the statute mile.</p> - -<p><span class="pagenum" id="Page273">[273]</span></p> - -<h2>Tables of Diameters, -Circumferences and Areas of Circles.</h2> - -<table class="diamarea" summary="Circles"> - -<tr class="btd bb"> -<th class="br">Diam.</th> -<th colspan="2" class="br">Area.</th> -<th colspan="2">Circum.</th> -</tr> - -<tr> -<td class="diam"> 0.0</td> -<td colspan="2" class="area br"> </td> -<td colspan="2" class="circumf"> </td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int"> </td> -<td class="area dec">.007854</td> -<td class="circumf int"> </td> -<td class="circumf dec">.31416</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int"> </td> -<td class="area dec">.031416</td> -<td class="circumf int"> </td> -<td class="circumf dec">.62832</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int"> </td> -<td class="area dec">.070686</td> -<td class="circumf int"> </td> -<td class="circumf dec">.94248</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int"> </td> -<td class="area dec">.12566</td> -<td class="circumf int">1</td> -<td class="circumf dec">.2566</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int"> </td> -<td class="area dec">.19735</td> -<td class="circumf int">1</td> -<td class="circumf dec">.5708</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int"> </td> -<td class="area dec">.28274</td> -<td class="circumf int">1</td> -<td class="circumf dec">.8850</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int"> </td> -<td class="area dec">.38485</td> -<td class="circumf int">2</td> -<td class="circumf dec">.1991</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int"> </td> -<td class="area dec">.50266</td> -<td class="circumf int">2</td> -<td class="circumf dec">.5133</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int"> </td> -<td class="area dec">.63617</td> -<td class="circumf int">2</td> -<td class="circumf dec">.8274</td> -</tr> - -<tr> -<td class="diam"> 1.0</td> -<td class="area int"> </td> -<td class="area dec">.7854</td> -<td class="circumf int">3</td> -<td class="circumf dec">.1416</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int"> </td> -<td class="area dec">.9503</td> -<td class="circumf int">3</td> -<td class="circumf dec">.4558</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1</td> -<td class="area dec">.1310</td> -<td class="circumf int">3</td> -<td class="circumf dec">.7699</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1</td> -<td class="area dec">.3273</td> -<td class="circumf int">4</td> -<td class="circumf dec">.0841</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1</td> -<td class="area dec">.5394</td> -<td class="circumf int">4</td> -<td class="circumf dec">.3982</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1</td> -<td class="area dec">.7671</td> -<td class="circumf int">4</td> -<td class="circumf dec">.7124</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">2</td> -<td class="area dec">.0106</td> -<td class="circumf int">5</td> -<td class="circumf dec">.0265</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">2</td> -<td class="area dec">.2698</td> -<td class="circumf int">5</td> -<td class="circumf dec">.3407</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">2</td> -<td class="area dec">.5447</td> -<td class="circumf int">5</td> -<td class="circumf dec">.6549</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">2</td> -<td class="area dec">.8353</td> -<td class="circumf int">5</td> -<td class="circumf dec">.9690</td> -</tr> - -<tr> -<td class="diam"> 2.0</td> -<td class="area int">3</td> -<td class="area dec">.1416</td> -<td class="circumf int">6</td> -<td class="circumf dec">.2832</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">3</td> -<td class="area dec">.4636</td> -<td class="circumf int">6</td> -<td class="circumf dec">.5973</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">3</td> -<td class="area dec">.8013</td> -<td class="circumf int">6</td> -<td class="circumf dec">.9115</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">4</td> -<td class="area dec">.1548</td> -<td class="circumf int">7</td> -<td class="circumf dec">.2257</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">4</td> -<td class="area dec">.5239</td> -<td class="circumf int">7</td> -<td class="circumf dec">.5398</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">4</td> -<td class="area dec">.9087</td> -<td class="circumf int">7</td> -<td class="circumf dec">.8540</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">5</td> -<td class="area dec">.3093</td> -<td class="circumf int">8</td> -<td class="circumf dec">.1681</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">5</td> -<td class="area dec">.7256</td> -<td class="circumf int">8</td> -<td class="circumf dec">.4823</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">6</td> -<td class="area dec">.1575</td> -<td class="circumf int">8</td> -<td class="circumf dec">.7965</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">6</td> -<td class="area dec">.6052</td> -<td class="circumf int">9</td> -<td class="circumf dec">.1106</td> -</tr> - -<tr> -<td class="diam"> 3.0</td> -<td class="area int">7</td> -<td class="area dec">.0686</td> -<td class="circumf int">9</td> -<td class="circumf dec">.4248</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">7</td> -<td class="area dec">.5477</td> -<td class="circumf int">9</td> -<td class="circumf dec">.7389</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">8</td> -<td class="area dec">.0425</td> -<td class="circumf int">10</td> -<td class="circumf dec">.0531</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">8</td> -<td class="area dec">.5530</td> -<td class="circumf int">10</td> -<td class="circumf dec">.3673</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">9</td> -<td class="area dec">.0792</td> -<td class="circumf int">10</td> -<td class="circumf dec">.6814</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">9</td> -<td class="area dec">.6211</td> -<td class="circumf int">10</td> -<td class="circumf dec">.9956</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">10</td> -<td class="area dec">.1788</td> -<td class="circumf int">11</td> -<td class="circumf dec">.3097</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">10</td> -<td class="area dec">.7521</td> -<td class="circumf int">11</td> -<td class="circumf dec">.6239</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">11</td> -<td class="area dec">.3411</td> -<td class="circumf int">11</td> -<td class="circumf dec">.9381</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">11</td> -<td class="area dec">.9456</td> -<td class="circumf int">12</td> -<td class="circumf dec">.2522</td> -</tr> - -<tr> -<td class="diam"> 4.0</td> -<td class="area int">12</td> -<td class="area dec">.5664</td> -<td class="circumf int">12</td> -<td class="circumf dec">.5664</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">13</td> -<td class="area dec">.2025</td> -<td class="circumf int">12</td> -<td class="circumf dec">.8805</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">13</td> -<td class="area dec">.8544</td> -<td class="circumf int">13</td> -<td class="circumf dec">.1947</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">14</td> -<td class="area dec">.5220</td> -<td class="circumf int">13</td> -<td class="circumf dec">.5088</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">15</td> -<td class="area dec">.2053</td> -<td class="circumf int">13</td> -<td class="circumf dec">.8230</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">15</td> -<td class="area dec">.9043</td> -<td class="circumf int">14</td> -<td class="circumf dec">.1372</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">16</td> -<td class="area dec">.6190</td> -<td class="circumf int">14</td> -<td class="circumf dec">.4513</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">17</td> -<td class="area dec">.3494</td> -<td class="circumf int">14</td> -<td class="circumf dec">.7655</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">18</td> -<td class="area dec">.0956</td> -<td class="circumf int">15</td> -<td class="circumf dec">.0796</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">18</td> -<td class="area dec">.8574</td> -<td class="circumf int">15</td> -<td class="circumf dec">.3938</td> -</tr> - -<tr> -<td class="diam"> 5.0</td> -<td class="area int">19</td> -<td class="area dec">.6350</td> -<td class="circumf int">15</td> -<td class="circumf dec">.7080</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">20</td> -<td class="area dec">.4282</td> -<td class="circumf int">16</td> -<td class="circumf dec">.0221</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">21</td> -<td class="area dec">.2372</td> -<td class="circumf int">16</td> -<td class="circumf dec">.3363</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">22</td> -<td class="area dec">.0618</td> -<td class="circumf int">16</td> -<td class="circumf dec">.6504</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">22</td> -<td class="area dec">.9022</td> -<td class="circumf int">16</td> -<td class="circumf dec">.9646</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">23</td> -<td class="area dec">.7583</td> -<td class="circumf int">17</td> -<td class="circumf dec">.2788</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">24</td> -<td class="area dec">.6301</td> -<td class="circumf int">17</td> -<td class="circumf dec">.5929</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">25</td> -<td class="area dec">.5176</td> -<td class="circumf int">17</td> -<td class="circumf dec">.9071</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">26</td> -<td class="area dec">.4208</td> -<td class="circumf int">18</td> -<td class="circumf dec">.2212</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">27</td> -<td class="area dec">.3397</td> -<td class="circumf int">18</td> -<td class="circumf dec">.5354</td> -</tr> - -<tr> -<td class="diam"> 6.0</td> -<td class="area int">28</td> -<td class="area dec">.2743</td> -<td class="circumf int">18</td> -<td class="circumf dec">.8496</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">29</td> -<td class="area dec">.2247</td> -<td class="circumf int">19</td> -<td class="circumf dec">.1637</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">30</td> -<td class="area dec">.1907</td> -<td class="circumf int">19</td> -<td class="circumf dec">.4779</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">31</td> -<td class="area dec">.1725</td> -<td class="circumf int">19</td> -<td class="circumf dec">.7920</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">32</td> -<td class="area dec">.1699</td> -<td class="circumf int">20</td> -<td class="circumf dec">.1062</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">33</td> -<td class="area dec">.1831</td> -<td class="circumf int">20</td> -<td class="circumf dec">.4204</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">34</td> -<td class="area dec">.2119</td> -<td class="circumf int">20</td> -<td class="circumf dec">.7345</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">35</td> -<td class="area dec">.2565</td> -<td class="circumf int">21</td> -<td class="circumf dec">.0487</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">36</td> -<td class="area dec">.3168</td> -<td class="circumf int">21</td> -<td class="circumf dec">.3628</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">37</td> -<td class="area dec">.3928</td> -<td class="circumf int">21</td> -<td class="circumf dec">.6770</td> -</tr> - -<tr> -<td class="diam"> 7.0</td> -<td class="area int">38</td> -<td class="area dec">.4845</td> -<td class="circumf int">21</td> -<td class="circumf dec">.9911</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">39</td> -<td class="area dec">.5919</td> -<td class="circumf int">22</td> -<td class="circumf dec">.3053</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">40</td> -<td class="area dec">.7150</td> -<td class="circumf int">22</td> -<td class="circumf dec">.6195</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">41</td> -<td class="area dec">.8539</td> -<td class="circumf int">22</td> -<td class="circumf dec">.9336</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">43</td> -<td class="area dec">.0084</td> -<td class="circumf int">23</td> -<td class="circumf dec">.2478</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">44</td> -<td class="area dec">.1786</td> -<td class="circumf int">23</td> -<td class="circumf dec">.5619</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">45</td> -<td class="area dec">.3646</td> -<td class="circumf int">23</td> -<td class="circumf dec">.8761</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">46</td> -<td class="area dec">.5663</td> -<td class="circumf int">24</td> -<td class="circumf dec">.1903</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">47</td> -<td class="area dec">.7836</td> -<td class="circumf int">24</td> -<td class="circumf dec">.5044</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">49</td> -<td class="area dec">.0167</td> -<td class="circumf int">24</td> -<td class="circumf dec">.8186</td> -</tr> - -<tr> -<td class="diam"> 8.0<span class="pagenum" id="Page274">[274]</span></td> -<td class="area int">50</td> -<td class="area dec">.2655</td> -<td class="circumf int">25</td> -<td class="circumf dec">.1327</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">51</td> -<td class="area dec">.5300</td> -<td class="circumf int">25</td> -<td class="circumf dec">.4469</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">52</td> -<td class="area dec">.8102</td> -<td class="circumf int">25</td> -<td class="circumf dec">.7611</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">54</td> -<td class="area dec">.1061</td> -<td class="circumf int">26</td> -<td class="circumf dec">.0752</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">55</td> -<td class="area dec">.4177</td> -<td class="circumf int">26</td> -<td class="circumf dec">.3894</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">56</td> -<td class="area dec">.7450</td> -<td class="circumf int">26</td> -<td class="circumf dec">.7035</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">58</td> -<td class="area dec">.0880</td> -<td class="circumf int">27</td> -<td class="circumf dec">.0177</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">59</td> -<td class="area dec">.4468</td> -<td class="circumf int">27</td> -<td class="circumf dec">.3319</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">60</td> -<td class="area dec">.8212</td> -<td class="circumf int">27</td> -<td class="circumf dec">.6460</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">62</td> -<td class="area dec">.2114</td> -<td class="circumf int">27</td> -<td class="circumf dec">.9602</td> -</tr> - -<tr> -<td class="diam"> 9.0</td> -<td class="area int">63</td> -<td class="area dec">.6173</td> -<td class="circumf int">28</td> -<td class="circumf dec">.2743</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">65</td> -<td class="area dec">.0388</td> -<td class="circumf int">28</td> -<td class="circumf dec">.5885</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">66</td> -<td class="area dec">.4761</td> -<td class="circumf int">28</td> -<td class="circumf dec">.9027</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">67</td> -<td class="area dec">.9291</td> -<td class="circumf int">29</td> -<td class="circumf dec">.2168</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">69</td> -<td class="area dec">.3978</td> -<td class="circumf int">29</td> -<td class="circumf dec">.5310</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">70</td> -<td class="area dec">.8822</td> -<td class="circumf int">29</td> -<td class="circumf dec">.8451</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">72</td> -<td class="area dec">.3823</td> -<td class="circumf int">30</td> -<td class="circumf dec">.1593</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">73</td> -<td class="area dec">.8981</td> -<td class="circumf int">30</td> -<td class="circumf dec">.4734</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">75</td> -<td class="area dec">.4296</td> -<td class="circumf int">30</td> -<td class="circumf dec">.7876</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">76</td> -<td class="area dec">.9769</td> -<td class="circumf int">31</td> -<td class="circumf dec">.1018</td> -</tr> - -<tr> -<td class="diam">10.0</td> -<td class="area int">78</td> -<td class="area dec">.5398</td> -<td class="circumf int">31</td> -<td class="circumf dec">.4159</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">80</td> -<td class="area dec">.1185</td> -<td class="circumf int">31</td> -<td class="circumf dec">.7301</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">81</td> -<td class="area dec">.7128</td> -<td class="circumf int">32</td> -<td class="circumf dec">.0442</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">83</td> -<td class="area dec">.3229</td> -<td class="circumf int">32</td> -<td class="circumf dec">.3584</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">84</td> -<td class="area dec">.9487</td> -<td class="circumf int">32</td> -<td class="circumf dec">.6726</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">86</td> -<td class="area dec">.5901</td> -<td class="circumf int">32</td> -<td class="circumf dec">.9887</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">88</td> -<td class="area dec">.2473</td> -<td class="circumf int">33</td> -<td class="circumf dec">.3009</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">89</td> -<td class="area dec">.9202</td> -<td class="circumf int">33</td> -<td class="circumf dec">.6150</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">91</td> -<td class="area dec">.6088</td> -<td class="circumf int">33</td> -<td class="circumf dec">.9292</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">93</td> -<td class="area dec">.3132</td> -<td class="circumf int">34</td> -<td class="circumf dec">.2434</td> -</tr> - -<tr> -<td class="diam">11.0</td> -<td class="area int">95</td> -<td class="area dec">.0332</td> -<td class="circumf int">34</td> -<td class="circumf dec">.5575</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">96</td> -<td class="area dec">.7689</td> -<td class="circumf int">34</td> -<td class="circumf dec">.8717</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">98</td> -<td class="area dec">.5203</td> -<td class="circumf int">35</td> -<td class="circumf dec">.1858</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">100</td> -<td class="area dec">.2875</td> -<td class="circumf int">35</td> -<td class="circumf dec">.5000</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">102</td> -<td class="area dec">.0703</td> -<td class="circumf int">35</td> -<td class="circumf dec">.8142</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">103</td> -<td class="area dec">.8689</td> -<td class="circumf int">36</td> -<td class="circumf dec">.1283</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">105</td> -<td class="area dec">.6832</td> -<td class="circumf int">36</td> -<td class="circumf dec">.4425</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">107</td> -<td class="area dec">.5132</td> -<td class="circumf int">36</td> -<td class="circumf dec">.7566</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">109</td> -<td class="area dec">.3588</td> -<td class="circumf int">37</td> -<td class="circumf dec">.0708</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">111</td> -<td class="area dec">.2202</td> -<td class="circumf int">37</td> -<td class="circumf dec">.3850</td> -</tr> - -<tr> -<td class="diam">12.0</td> -<td class="area int">113</td> -<td class="area dec">.0973</td> -<td class="circumf int">37</td> -<td class="circumf dec">.6991</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">114</td> -<td class="area dec">.9901</td> -<td class="circumf int">38</td> -<td class="circumf dec">.0133</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">116</td> -<td class="area dec">.8987</td> -<td class="circumf int">38</td> -<td class="circumf dec">.3274</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">118</td> -<td class="area dec">.8229</td> -<td class="circumf int">38</td> -<td class="circumf dec">.6416</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">120</td> -<td class="area dec">.7628</td> -<td class="circumf int">38</td> -<td class="circumf dec">.9557</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">122</td> -<td class="area dec">.7185</td> -<td class="circumf int">39</td> -<td class="circumf dec">.2099</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">124</td> -<td class="area dec">.6898</td> -<td class="circumf int">39</td> -<td class="circumf dec">.6841</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">126</td> -<td class="area dec">.6769</td> -<td class="circumf int">39</td> -<td class="circumf dec">.8982</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">128</td> -<td class="area dec">.6796</td> -<td class="circumf int">40</td> -<td class="circumf dec">.2121</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">130</td> -<td class="area dec">.6981</td> -<td class="circumf int">40</td> -<td class="circumf dec">.5265</td> -</tr> - -<tr> -<td class="diam">13.0</td> -<td class="area int">132</td> -<td class="area dec">.7323</td> -<td class="circumf int">40</td> -<td class="circumf dec">.8407</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">134</td> -<td class="area dec">.7822</td> -<td class="circumf int">41</td> -<td class="circumf dec">.1549</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">136</td> -<td class="area dec">.8478</td> -<td class="circumf int">41</td> -<td class="circumf dec">.4690</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">138</td> -<td class="area dec">.9291</td> -<td class="circumf int">41</td> -<td class="circumf dec">.7832</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">141</td> -<td class="area dec">.0261</td> -<td class="circumf int">42</td> -<td class="circumf dec">.0973</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">143</td> -<td class="area dec">.1388</td> -<td class="circumf int">42</td> -<td class="circumf dec">.4116</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">145</td> -<td class="area dec">.2672</td> -<td class="circumf int">42</td> -<td class="circumf dec">.7257</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">147</td> -<td class="area dec">.4114</td> -<td class="circumf int">43</td> -<td class="circumf dec">.0398</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">149</td> -<td class="area dec">.5712</td> -<td class="circumf int">43</td> -<td class="circumf dec">.3540</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">151</td> -<td class="area dec">.7468</td> -<td class="circumf int">43</td> -<td class="circumf dec">.6681</td> -</tr> - -<tr> -<td class="diam">14.0</td> -<td class="area int">153</td> -<td class="area dec">.9380</td> -<td class="circumf int">43</td> -<td class="circumf dec">.9823</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">156</td> -<td class="area dec">.1450</td> -<td class="circumf int">44</td> -<td class="circumf dec">.2965</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">158</td> -<td class="area dec">.3677</td> -<td class="circumf int">44</td> -<td class="circumf dec">.6106</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">160</td> -<td class="area dec">.6061</td> -<td class="circumf int">44</td> -<td class="circumf dec">.9248</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">162</td> -<td class="area dec">.8602</td> -<td class="circumf int">45</td> -<td class="circumf dec">.2389</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">165</td> -<td class="area dec">.1300</td> -<td class="circumf int">45</td> -<td class="circumf dec">.5531</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">167</td> -<td class="area dec">.4155</td> -<td class="circumf int">45</td> -<td class="circumf dec">.8673</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">169</td> -<td class="area dec">.7167</td> -<td class="circumf int">46</td> -<td class="circumf dec">.1814</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">172</td> -<td class="area dec">.0336</td> -<td class="circumf int">46</td> -<td class="circumf dec">.4956</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">174</td> -<td class="area dec">.3662</td> -<td class="circumf int">46</td> -<td class="circumf dec">.8097</td> -</tr> - -<tr> -<td class="diam">15.0</td> -<td class="area int">176</td> -<td class="area dec">.7146</td> -<td class="circumf int">47</td> -<td class="circumf dec">.1239</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">179</td> -<td class="area dec">.0786</td> -<td class="circumf int">47</td> -<td class="circumf dec">.4380</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">181</td> -<td class="area dec">.4584</td> -<td class="circumf int">47</td> -<td class="circumf dec">.7522</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">183</td> -<td class="area dec">.8539</td> -<td class="circumf int">48</td> -<td class="circumf dec">.0664</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">186</td> -<td class="area dec">.2650</td> -<td class="circumf int">48</td> -<td class="circumf dec">.3805</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">188</td> -<td class="area dec">.6919</td> -<td class="circumf int">48</td> -<td class="circumf dec">.6947</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">191</td> -<td class="area dec">.1345</td> -<td class="circumf int">49</td> -<td class="circumf dec">.0088</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">193</td> -<td class="area dec">.5928</td> -<td class="circumf int">49</td> -<td class="circumf dec">.3230</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">196</td> -<td class="area dec">.0668</td> -<td class="circumf int">49</td> -<td class="circumf dec">.6372</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">198</td> -<td class="area dec">.5565</td> -<td class="circumf int">49</td> -<td class="circumf dec">.9513</td> -</tr> - -<tr> -<td class="diam">16.0</td> -<td class="area int">201</td> -<td class="area dec">.0619</td> -<td class="circumf int">50</td> -<td class="circumf dec">.2655</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">203</td> -<td class="area dec">.5831</td> -<td class="circumf int">50</td> -<td class="circumf dec">.5796</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">206</td> -<td class="area dec">.1199</td> -<td class="circumf int">50</td> -<td class="circumf dec">.8938</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">208</td> -<td class="area dec">.6724</td> -<td class="circumf int">51</td> -<td class="circumf dec">.2080</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">211</td> -<td class="area dec">.2407</td> -<td class="circumf int">51</td> -<td class="circumf dec">.5221</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">213</td> -<td class="area dec">.8246</td> -<td class="circumf int">51</td> -<td class="circumf dec">.8363</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">216</td> -<td class="area dec">.4243</td> -<td class="circumf int">52</td> -<td class="circumf dec">.1504</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">219</td> -<td class="area dec">.0397</td> -<td class="circumf int">52</td> -<td class="circumf dec">.4646</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">221</td> -<td class="area dec">.6708</td> -<td class="circumf int">52</td> -<td class="circumf dec">.7788</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">224</td> -<td class="area dec">.3176</td> -<td class="circumf int">53</td> -<td class="circumf dec">.0929</td> -</tr> - -<tr> -<td class="diam">17.0</td> -<td class="area int">226</td> -<td class="area dec">.9801</td> -<td class="circumf int">53</td> -<td class="circumf dec">.4071</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">229</td> -<td class="area dec">.6583</td> -<td class="circumf int">53</td> -<td class="circumf dec">.7212</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">232</td> -<td class="area dec">.3522</td> -<td class="circumf int">54</td> -<td class="circumf dec">.0354</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">235</td> -<td class="area dec">.0618</td> -<td class="circumf int">54</td> -<td class="circumf dec">.3496</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">237</td> -<td class="area dec">.7871</td> -<td class="circumf int">54</td> -<td class="circumf dec">.6637</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">240</td> -<td class="area dec">.5282</td> -<td class="circumf int">54</td> -<td class="circumf dec">.9779</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">243</td> -<td class="area dec">.2849</td> -<td class="circumf int">55</td> -<td class="circumf dec">.2920</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">246</td> -<td class="area dec">.0574</td> -<td class="circumf int">55</td> -<td class="circumf dec">.6062</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">248</td> -<td class="area dec">.8456</td> -<td class="circumf int">55</td> -<td class="circumf dec">.9203</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">251</td> -<td class="area dec">.6494</td> -<td class="circumf int">56</td> -<td class="circumf dec">.2345</td> -</tr> - -<tr> -<td class="diam">18.0</td> -<td class="area int">254</td> -<td class="area dec">.4690</td> -<td class="circumf int">56</td> -<td class="circumf dec">.5486</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">257</td> -<td class="area dec">.3043</td> -<td class="circumf int">56</td> -<td class="circumf dec">.8628</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">260</td> -<td class="area dec">.1553</td> -<td class="circumf int">57</td> -<td class="circumf dec">.1770</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">263</td> -<td class="area dec">.0220</td> -<td class="circumf int">57</td> -<td class="circumf dec">.4911</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">265</td> -<td class="area dec">.9044</td> -<td class="circumf int">57</td> -<td class="circumf dec">.8053</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">268</td> -<td class="area dec">.8025</td> -<td class="circumf int">58</td> -<td class="circumf dec">.1195</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">271</td> -<td class="area dec">.7164</td> -<td class="circumf int">58</td> -<td class="circumf dec">.4336</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">274</td> -<td class="area dec">.6459</td> -<td class="circumf int">58</td> -<td class="circumf dec">.7478</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">277</td> -<td class="area dec">.5911</td> -<td class="circumf int">59</td> -<td class="circumf dec">.0619</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">280</td> -<td class="area dec">.5521</td> -<td class="circumf int">59</td> -<td class="circumf dec">.3761</td> -</tr> - -<tr> -<td class="diam">19.0</td> -<td class="area int">283</td> -<td class="area dec">.5287</td> -<td class="circumf int">59</td> -<td class="circumf dec">.6903</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">286</td> -<td class="area dec">.5211</td> -<td class="circumf int">60</td> -<td class="circumf dec">.0044</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">289</td> -<td class="area dec">.5292</td> -<td class="circumf int">60</td> -<td class="circumf dec">.3186</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">292</td> -<td class="area dec">.5530</td> -<td class="circumf int">60</td> -<td class="circumf dec">.6327</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">295</td> -<td class="area dec">.5925</td> -<td class="circumf int">60</td> -<td class="circumf dec">.9469</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">298</td> -<td class="area dec">.6477</td> -<td class="circumf int">61</td> -<td class="circumf dec">.2611</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">301</td> -<td class="area dec">.7186</td> -<td class="circumf int">61</td> -<td class="circumf dec">.5752</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">304</td> -<td class="area dec">.8052</td> -<td class="circumf int">61</td> -<td class="circumf dec">.8894</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">307</td> -<td class="area dec">.9075</td> -<td class="circumf int">62</td> -<td class="circumf dec">.2035</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">311</td> -<td class="area dec">.0255</td> -<td class="circumf int">62</td> -<td class="circumf dec">.5177</td> -</tr> - -<tr> -<td class="diam">20.0<span class="pagenum" id="Page275">[275]</span></td> -<td class="area int">314</td> -<td class="area dec">.1593</td> -<td class="circumf int">62</td> -<td class="circumf dec">.8319</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">317</td> -<td class="area dec">.3087</td> -<td class="circumf int">63</td> -<td class="circumf dec">.1460</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">320</td> -<td class="area dec">.4739</td> -<td class="circumf int">63</td> -<td class="circumf dec">.4602</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">323</td> -<td class="area dec">.6547</td> -<td class="circumf int">63</td> -<td class="circumf dec">.7743</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">326</td> -<td class="area dec">.8513</td> -<td class="circumf int">64</td> -<td class="circumf dec">.0885</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">330</td> -<td class="area dec">.0636</td> -<td class="circumf int">64</td> -<td class="circumf dec">.4026</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">333</td> -<td class="area dec">.2916</td> -<td class="circumf int">64</td> -<td class="circumf dec">.7168</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">336</td> -<td class="area dec">.5353</td> -<td class="circumf int">65</td> -<td class="circumf dec">.0310</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">339</td> -<td class="area dec">.7947</td> -<td class="circumf int">65</td> -<td class="circumf dec">.3451</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">343</td> -<td class="area dec">.0698</td> -<td class="circumf int">65</td> -<td class="circumf dec">.6593</td> -</tr> - -<tr> -<td class="diam">21.0</td> -<td class="area int">346</td> -<td class="area dec">.3606</td> -<td class="circumf int">65</td> -<td class="circumf dec">.9734</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">349</td> -<td class="area dec">.6671</td> -<td class="circumf int">66</td> -<td class="circumf dec">.2876</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">352</td> -<td class="area dec">.9894</td> -<td class="circumf int">66</td> -<td class="circumf dec">.6018</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">356</td> -<td class="area dec">.3273</td> -<td class="circumf int">66</td> -<td class="circumf dec">.9159</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">359</td> -<td class="area dec">.6809</td> -<td class="circumf int">67</td> -<td class="circumf dec">.2301</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">363</td> -<td class="area dec">.0503</td> -<td class="circumf int">67</td> -<td class="circumf dec">.5442</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">266</td> -<td class="area dec">.4354</td> -<td class="circumf int">67</td> -<td class="circumf dec">.8584</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">369</td> -<td class="area dec">.8361</td> -<td class="circumf int">68</td> -<td class="circumf dec">.1726</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">373</td> -<td class="area dec">.2526</td> -<td class="circumf int">68</td> -<td class="circumf dec">.4867</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">376</td> -<td class="area dec">.6848</td> -<td class="circumf int">68</td> -<td class="circumf dec">.8009</td> -</tr> - -<tr> -<td class="diam">22.0</td> -<td class="area int">380</td> -<td class="area dec">.1327</td> -<td class="circumf int">69</td> -<td class="circumf dec">.1150</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">383</td> -<td class="area dec">.5963</td> -<td class="circumf int">69</td> -<td class="circumf dec">.4292</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">387</td> -<td class="area dec">.0756</td> -<td class="circumf int">69</td> -<td class="circumf dec">.7434</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">390</td> -<td class="area dec">.5707</td> -<td class="circumf int">70</td> -<td class="circumf dec">.0575</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">394</td> -<td class="area dec">.0814</td> -<td class="circumf int">70</td> -<td class="circumf dec">.3717</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">397</td> -<td class="area dec">.6078</td> -<td class="circumf int">70</td> -<td class="circumf dec">.6858</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">401</td> -<td class="area dec">.1500</td> -<td class="circumf int">71</td> -<td class="circumf dec">.0000</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">404</td> -<td class="area dec">.7078</td> -<td class="circumf int">71</td> -<td class="circumf dec">.3142</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">408</td> -<td class="area dec">.2814</td> -<td class="circumf int">71</td> -<td class="circumf dec">.6283</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">411</td> -<td class="area dec">.8707</td> -<td class="circumf int">71</td> -<td class="circumf dec">.9425</td> -</tr> - -<tr> -<td class="diam">23.0</td> -<td class="area int">415</td> -<td class="area dec">.4756</td> -<td class="circumf int">72</td> -<td class="circumf dec">.2566</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">419</td> -<td class="area dec">.0993</td> -<td class="circumf int">72</td> -<td class="circumf dec">.5708</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">422</td> -<td class="area dec">.7327</td> -<td class="circumf int">72</td> -<td class="circumf dec">.8849</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">426</td> -<td class="area dec">.3848</td> -<td class="circumf int">73</td> -<td class="circumf dec">.1991</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">430</td> -<td class="area dec">.0526</td> -<td class="circumf int">73</td> -<td class="circumf dec">.5133</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">433</td> -<td class="area dec">.7361</td> -<td class="circumf int">73</td> -<td class="circumf dec">.8274</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">437</td> -<td class="area dec">.4354</td> -<td class="circumf int">74</td> -<td class="circumf dec">.1416</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">441</td> -<td class="area dec">.1503</td> -<td class="circumf int">74</td> -<td class="circumf dec">.4557</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">444</td> -<td class="area dec">.8809</td> -<td class="circumf int">74</td> -<td class="circumf dec">.7699</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">448</td> -<td class="area dec">.6273</td> -<td class="circumf int">75</td> -<td class="circumf dec">.0841</td> -</tr> - -<tr> -<td class="diam">24.0</td> -<td class="area int">452</td> -<td class="area dec">.3893</td> -<td class="circumf int">75</td> -<td class="circumf dec">.3982</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">456</td> -<td class="area dec">.1671</td> -<td class="circumf int">75</td> -<td class="circumf dec">.7424</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">459</td> -<td class="area dec">.9606</td> -<td class="circumf int">76</td> -<td class="circumf dec">.0265</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">463</td> -<td class="area dec">.7693</td> -<td class="circumf int">76</td> -<td class="circumf dec">.3407</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">467</td> -<td class="area dec">.5947</td> -<td class="circumf int">76</td> -<td class="circumf dec">.6549</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">471</td> -<td class="area dec">.4352</td> -<td class="circumf int">76</td> -<td class="circumf dec">.9690</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">475</td> -<td class="area dec">.2916</td> -<td class="circumf int">77</td> -<td class="circumf dec">.2832</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">479</td> -<td class="area dec">.1636</td> -<td class="circumf int">77</td> -<td class="circumf dec">.5973</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">483</td> -<td class="area dec">.0513</td> -<td class="circumf int">77</td> -<td class="circumf dec">.9115</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">486</td> -<td class="area dec">.9547</td> -<td class="circumf int">78</td> -<td class="circumf dec">.2257</td> -</tr> - -<tr> -<td class="diam">25.0</td> -<td class="area int">490</td> -<td class="area dec">.8739</td> -<td class="circumf int">78</td> -<td class="circumf dec">.5398</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">494</td> -<td class="area dec">.8087</td> -<td class="circumf int">78</td> -<td class="circumf dec">.8540</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">498</td> -<td class="area dec">.7592</td> -<td class="circumf int">79</td> -<td class="circumf dec">.1681</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">502</td> -<td class="area dec">.7255</td> -<td class="circumf int">79</td> -<td class="circumf dec">.4823</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">506</td> -<td class="area dec">.7075</td> -<td class="circumf int">79</td> -<td class="circumf dec">.7965</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">510</td> -<td class="area dec">.7052</td> -<td class="circumf int">80</td> -<td class="circumf dec">.1106</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">514</td> -<td class="area dec">.7185</td> -<td class="circumf int">80</td> -<td class="circumf dec">.4248</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">518</td> -<td class="area dec">.7476</td> -<td class="circumf int">80</td> -<td class="circumf dec">.7389</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">522</td> -<td class="area dec">.7924</td> -<td class="circumf int">81</td> -<td class="circumf dec">.0531</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">526</td> -<td class="area dec">.8529</td> -<td class="circumf int">81</td> -<td class="circumf dec">.3672</td> -</tr> - -<tr> -<td class="diam">26.0</td> -<td class="area int">530</td> -<td class="area dec">.9292</td> -<td class="circumf int">81</td> -<td class="circumf dec">.6814</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">535</td> -<td class="area dec">.0211</td> -<td class="circumf int">81</td> -<td class="circumf dec">.9956</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">539</td> -<td class="area dec">.1287</td> -<td class="circumf int">82</td> -<td class="circumf dec">.3097</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">543</td> -<td class="area dec">.2521</td> -<td class="circumf int">82</td> -<td class="circumf dec">.6239</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">547</td> -<td class="area dec">.3911</td> -<td class="circumf int">82</td> -<td class="circumf dec">.9380</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">551</td> -<td class="area dec">.5459</td> -<td class="circumf int">83</td> -<td class="circumf dec">.2522</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">555</td> -<td class="area dec">.7163</td> -<td class="circumf int">83</td> -<td class="circumf dec">.5664</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">559</td> -<td class="area dec">.9025</td> -<td class="circumf int">83</td> -<td class="circumf dec">.8805</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">564</td> -<td class="area dec">.1044</td> -<td class="circumf int">84</td> -<td class="circumf dec">.1947</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">568</td> -<td class="area dec">.3220</td> -<td class="circumf int">84</td> -<td class="circumf dec">.5088</td> -</tr> - -<tr> -<td class="diam">27.0</td> -<td class="area int">572</td> -<td class="area dec">.5553</td> -<td class="circumf int">84</td> -<td class="circumf dec">.8230</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">576</td> -<td class="area dec">.8043</td> -<td class="circumf int">85</td> -<td class="circumf dec">.1372</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">581</td> -<td class="area dec">.0690</td> -<td class="circumf int">85</td> -<td class="circumf dec">.4513</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">585</td> -<td class="area dec">.3494</td> -<td class="circumf int">85</td> -<td class="circumf dec">.7655</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">589</td> -<td class="area dec">.6455</td> -<td class="circumf int">86</td> -<td class="circumf dec">.0796</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">593</td> -<td class="area dec">.9574</td> -<td class="circumf int">86</td> -<td class="circumf dec">.3938</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">598</td> -<td class="area dec">.2849</td> -<td class="circumf int">86</td> -<td class="circumf dec">.7080</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">602</td> -<td class="area dec">.6282</td> -<td class="circumf int">87</td> -<td class="circumf dec">.0221</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">606</td> -<td class="area dec">.9871</td> -<td class="circumf int">87</td> -<td class="circumf dec">.3363</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">611</td> -<td class="area dec">.3618</td> -<td class="circumf int">87</td> -<td class="circumf dec">.6504</td> -</tr> - -<tr> -<td class="diam">28.0</td> -<td class="area int">615</td> -<td class="area dec">.7522</td> -<td class="circumf int">87</td> -<td class="circumf dec">.9646</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">620</td> -<td class="area dec">.1582</td> -<td class="circumf int">88</td> -<td class="circumf dec">.2788</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">624</td> -<td class="area dec">.5800</td> -<td class="circumf int">88</td> -<td class="circumf dec">.5929</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">629</td> -<td class="area dec">.0175</td> -<td class="circumf int">88</td> -<td class="circumf dec">.9071</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">633</td> -<td class="area dec">.4707</td> -<td class="circumf int">89</td> -<td class="circumf dec">.2212</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">637</td> -<td class="area dec">.9397</td> -<td class="circumf int">89</td> -<td class="circumf dec">.5354</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">642</td> -<td class="area dec">.4243</td> -<td class="circumf int">89</td> -<td class="circumf dec">.8495</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">646</td> -<td class="area dec">.9246</td> -<td class="circumf int">90</td> -<td class="circumf dec">.1637</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">651</td> -<td class="area dec">.4407</td> -<td class="circumf int">90</td> -<td class="circumf dec">.4779</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">655</td> -<td class="area dec">.9724</td> -<td class="circumf int">90</td> -<td class="circumf dec">.7920</td> -</tr> - -<tr> -<td class="diam">29.0</td> -<td class="area int">660</td> -<td class="area dec">.5199</td> -<td class="circumf int">91</td> -<td class="circumf dec">.1063</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">665</td> -<td class="area dec">.0830</td> -<td class="circumf int">91</td> -<td class="circumf dec">.4203</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">669</td> -<td class="area dec">.6619</td> -<td class="circumf int">91</td> -<td class="circumf dec">.7345</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">674</td> -<td class="area dec">.2565</td> -<td class="circumf int">92</td> -<td class="circumf dec">.0487</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">678</td> -<td class="area dec">.8668</td> -<td class="circumf int">92</td> -<td class="circumf dec">.3628</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">683</td> -<td class="area dec">.4928</td> -<td class="circumf int">92</td> -<td class="circumf dec">.6770</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">688</td> -<td class="area dec">.1345</td> -<td class="circumf int">92</td> -<td class="circumf dec">.9911</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">692</td> -<td class="area dec">.7919</td> -<td class="circumf int">93</td> -<td class="circumf dec">.3053</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">697</td> -<td class="area dec">.4650</td> -<td class="circumf int">93</td> -<td class="circumf dec">.6195</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">702</td> -<td class="area dec">.1538</td> -<td class="circumf int">93</td> -<td class="circumf dec">.9336</td> -</tr> - -<tr> -<td class="diam">30.0</td> -<td class="area int">706</td> -<td class="area dec">.8583</td> -<td class="circumf int">94</td> -<td class="circumf dec">.2478</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">711</td> -<td class="area dec">.5786</td> -<td class="circumf int">94</td> -<td class="circumf dec">.5610</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">716</td> -<td class="area dec">.3145</td> -<td class="circumf int">94</td> -<td class="circumf dec">.8761</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">721</td> -<td class="area dec">.0662</td> -<td class="circumf int">95</td> -<td class="circumf dec">.1903</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">725</td> -<td class="area dec">.8336</td> -<td class="circumf int">95</td> -<td class="circumf dec">.5044</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">730</td> -<td class="area dec">.6167</td> -<td class="circumf int">95</td> -<td class="circumf dec">.8186</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">735</td> -<td class="area dec">.4154</td> -<td class="circumf int">96</td> -<td class="circumf dec">.1327</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">740</td> -<td class="area dec">.2299</td> -<td class="circumf int">96</td> -<td class="circumf dec">.4469</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">745</td> -<td class="area dec">.0601</td> -<td class="circumf int">96</td> -<td class="circumf dec">.7611</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">749</td> -<td class="area dec">.9060</td> -<td class="circumf int">97</td> -<td class="circumf dec">.0752</td> -</tr> - -<tr> -<td class="diam">31.0</td> -<td class="area int">754</td> -<td class="area dec">.7676</td> -<td class="circumf int">97</td> -<td class="circumf dec">.3894</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">759</td> -<td class="area dec">.6450</td> -<td class="circumf int">97</td> -<td class="circumf dec">.7035</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">761</td> -<td class="area dec">.5380</td> -<td class="circumf int">98</td> -<td class="circumf dec">.0177</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">769</td> -<td class="area dec">.4467</td> -<td class="circumf int">98</td> -<td class="circumf dec">.3319</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">774</td> -<td class="area dec">.3712</td> -<td class="circumf int">98</td> -<td class="circumf dec">.6460</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">779</td> -<td class="area dec">.3113</td> -<td class="circumf int">98</td> -<td class="circumf dec">.9602</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">784</td> -<td class="area dec">.2672</td> -<td class="circumf int">99</td> -<td class="circumf dec">.2743</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">789</td> -<td class="area dec">.2388</td> -<td class="circumf int">99</td> -<td class="circumf dec">.5885</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">794</td> -<td class="area dec">.2260</td> -<td class="circumf int">99</td> -<td class="circumf dec">.9026</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">799</td> -<td class="area dec">.2290</td> -<td class="circumf int">100</td> -<td class="circumf dec">.2168</td> -</tr> - -<tr> -<td class="diam">32.0<span class="pagenum" id="Page276">[276]</span></td> -<td class="area int">804</td> -<td class="area dec">.2477</td> -<td class="circumf int">100</td> -<td class="circumf dec">.5310</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">809</td> -<td class="area dec">.2821</td> -<td class="circumf int">100</td> -<td class="circumf dec">.8451</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">814</td> -<td class="area dec">.3322</td> -<td class="circumf int">101</td> -<td class="circumf dec">.1593</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">819</td> -<td class="area dec">.3980</td> -<td class="circumf int">101</td> -<td class="circumf dec">.4734</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">824</td> -<td class="area dec">.4796</td> -<td class="circumf int">101</td> -<td class="circumf dec">.7876</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">829</td> -<td class="area dec">.5768</td> -<td class="circumf int">102</td> -<td class="circumf dec">.1018</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">834</td> -<td class="area dec">.6898</td> -<td class="circumf int">102</td> -<td class="circumf dec">.4159</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">839</td> -<td class="area dec">.8185</td> -<td class="circumf int">102</td> -<td class="circumf dec">.7301</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">844</td> -<td class="area dec">.9628</td> -<td class="circumf int">103</td> -<td class="circumf dec">.0442</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">850</td> -<td class="area dec">.1229</td> -<td class="circumf int">103</td> -<td class="circumf dec">.3584</td> -</tr> - -<tr> -<td class="diam">33.0</td> -<td class="area int">855</td> -<td class="area dec">.2986</td> -<td class="circumf int">103</td> -<td class="circumf dec">.6726</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">860</td> -<td class="area dec">.4902</td> -<td class="circumf int">103</td> -<td class="circumf dec">.9867</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">865</td> -<td class="area dec">.6973</td> -<td class="circumf int">104</td> -<td class="circumf dec">.3009</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">870</td> -<td class="area dec">.9202</td> -<td class="circumf int">104</td> -<td class="circumf dec">.6150</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">876</td> -<td class="area dec">.1588</td> -<td class="circumf int">104</td> -<td class="circumf dec">.9292</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">881</td> -<td class="area dec">.4131</td> -<td class="circumf int">105</td> -<td class="circumf dec">.2434</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">886</td> -<td class="area dec">.6831</td> -<td class="circumf int">105</td> -<td class="circumf dec">.5575</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">891</td> -<td class="area dec">.9688</td> -<td class="circumf int">105</td> -<td class="circumf dec">.8717</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">897</td> -<td class="area dec">.2703</td> -<td class="circumf int">106</td> -<td class="circumf dec">.1858</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">902</td> -<td class="area dec">.5874</td> -<td class="circumf int">106</td> -<td class="circumf dec">.5000</td> -</tr> - -<tr> -<td class="diam">34.0</td> -<td class="area int">907</td> -<td class="area dec">.9203</td> -<td class="circumf int">106</td> -<td class="circumf dec">.8142</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">913</td> -<td class="area dec">.2688</td> -<td class="circumf int">107</td> -<td class="circumf dec">.1283</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">918</td> -<td class="area dec">.6331</td> -<td class="circumf int">107</td> -<td class="circumf dec">.4425</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">924</td> -<td class="area dec">.0131</td> -<td class="circumf int">107</td> -<td class="circumf dec">.7566</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">929</td> -<td class="area dec">.4088</td> -<td class="circumf int">108</td> -<td class="circumf dec">.0708</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">934</td> -<td class="area dec">.8202</td> -<td class="circumf int">108</td> -<td class="circumf dec">.3849</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">940</td> -<td class="area dec">.2473</td> -<td class="circumf int">108</td> -<td class="circumf dec">.6991</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">945</td> -<td class="area dec">.6901</td> -<td class="circumf int">109</td> -<td class="circumf dec">.0133</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">951</td> -<td class="area dec">.1486</td> -<td class="circumf int">109</td> -<td class="circumf dec">.3274</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">956</td> -<td class="area dec">.6228</td> -<td class="circumf int">109</td> -<td class="circumf dec">.6416</td> -</tr> - -<tr> -<td class="diam">35.0</td> -<td class="area int">962</td> -<td class="area dec">.1128</td> -<td class="circumf int">109</td> -<td class="circumf dec">.9557</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">967</td> -<td class="area dec">.6184</td> -<td class="circumf int">110</td> -<td class="circumf dec">.2699</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">973</td> -<td class="area dec">.1397</td> -<td class="circumf int">110</td> -<td class="circumf dec">.5841</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">978</td> -<td class="area dec">.6768</td> -<td class="circumf int">110</td> -<td class="circumf dec">.8982</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">984</td> -<td class="area dec">.2296</td> -<td class="circumf int">111</td> -<td class="circumf dec">.2124</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">989</td> -<td class="area dec">.7980</td> -<td class="circumf int">111</td> -<td class="circumf dec">.5265</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">995</td> -<td class="area dec">.3822</td> -<td class="circumf int">111</td> -<td class="circumf dec">.8407</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1000</td> -<td class="area dec">.9821</td> -<td class="circumf int">112</td> -<td class="circumf dec">.1549</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1006</td> -<td class="area dec">.5977</td> -<td class="circumf int">112</td> -<td class="circumf dec">.4690</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1012</td> -<td class="area dec">.2290</td> -<td class="circumf int">112</td> -<td class="circumf dec">.7832</td> -</tr> - -<tr> -<td class="diam">36.0</td> -<td class="area int">1017</td> -<td class="area dec">.8760</td> -<td class="circumf int">113</td> -<td class="circumf dec">.0973</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1023</td> -<td class="area dec">.5387</td> -<td class="circumf int">113</td> -<td class="circumf dec">.4115</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1029</td> -<td class="area dec">.2172</td> -<td class="circumf int">113</td> -<td class="circumf dec">.7257</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1034</td> -<td class="area dec">.9113</td> -<td class="circumf int">114</td> -<td class="circumf dec">.0398</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1040</td> -<td class="area dec">.6212</td> -<td class="circumf int">114</td> -<td class="circumf dec">.3540</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1046</td> -<td class="area dec">.3467</td> -<td class="circumf int">114</td> -<td class="circumf dec">.6681</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1052</td> -<td class="area dec">.0880</td> -<td class="circumf int">114</td> -<td class="circumf dec">.9823</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1057</td> -<td class="area dec">.8449</td> -<td class="circumf int">115</td> -<td class="circumf dec">.2965</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1063</td> -<td class="area dec">.6176</td> -<td class="circumf int">115</td> -<td class="circumf dec">.6106</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1069</td> -<td class="area dec">.4060</td> -<td class="circumf int">115</td> -<td class="circumf dec">.9248</td> -</tr> - -<tr> -<td class="diam">37.0</td> -<td class="area int">1075</td> -<td class="area dec">.2101</td> -<td class="circumf int">116</td> -<td class="circumf dec">.2389</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1081</td> -<td class="area dec">.0299</td> -<td class="circumf int">116</td> -<td class="circumf dec">.5531</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1086</td> -<td class="area dec">.8654</td> -<td class="circumf int">116</td> -<td class="circumf dec">.8672</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1093</td> -<td class="area dec">.7166</td> -<td class="circumf int">117</td> -<td class="circumf dec">.1814</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1098</td> -<td class="area dec">.5835</td> -<td class="circumf int">117</td> -<td class="circumf dec">.4956</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1104</td> -<td class="area dec">.4662</td> -<td class="circumf int">117</td> -<td class="circumf dec">.8097</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1110</td> -<td class="area dec">.3645</td> -<td class="circumf int">118</td> -<td class="circumf dec">.1239</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1116</td> -<td class="area dec">.2786</td> -<td class="circumf int">118</td> -<td class="circumf dec">.4380</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1122</td> -<td class="area dec">.2083</td> -<td class="circumf int">118</td> -<td class="circumf dec">.7522</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1128</td> -<td class="area dec">.1538</td> -<td class="circumf int">119</td> -<td class="circumf dec">.0664</td> -</tr> - -<tr> -<td class="diam">38.0</td> -<td class="area int">1134</td> -<td class="area dec">.1149</td> -<td class="circumf int">119</td> -<td class="circumf dec">.3805</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1140</td> -<td class="area dec">.0918</td> -<td class="circumf int">119</td> -<td class="circumf dec">.6947</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1146</td> -<td class="area dec">.0844</td> -<td class="circumf int">120</td> -<td class="circumf dec">.0088</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1152</td> -<td class="area dec">.0927</td> -<td class="circumf int">120</td> -<td class="circumf dec">.3230</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1158</td> -<td class="area dec">.1167</td> -<td class="circumf int">120</td> -<td class="circumf dec">.6372</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1164</td> -<td class="area dec">.1564</td> -<td class="circumf int">120</td> -<td class="circumf dec">.9513</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1170</td> -<td class="area dec">.2118</td> -<td class="circumf int">121</td> -<td class="circumf dec">.2655</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1176</td> -<td class="area dec">.2830</td> -<td class="circumf int">121</td> -<td class="circumf dec">.5796</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1182</td> -<td class="area dec">.3698</td> -<td class="circumf int">121</td> -<td class="circumf dec">.8938</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1188</td> -<td class="area dec">.4724</td> -<td class="circumf int">122</td> -<td class="circumf dec">.2080</td> -</tr> - -<tr> -<td class="diam">39.0</td> -<td class="area int">1194</td> -<td class="area dec">.5906</td> -<td class="circumf int">122</td> -<td class="circumf dec">.5221</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1200</td> -<td class="area dec">.7246</td> -<td class="circumf int">122</td> -<td class="circumf dec">.8363</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1206</td> -<td class="area dec">.8742</td> -<td class="circumf int">123</td> -<td class="circumf dec">.1504</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1213</td> -<td class="area dec">.0396</td> -<td class="circumf int">123</td> -<td class="circumf dec">.4646</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1219</td> -<td class="area dec">.2207</td> -<td class="circumf int">123</td> -<td class="circumf dec">.7788</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1225</td> -<td class="area dec">.4175</td> -<td class="circumf int">124</td> -<td class="circumf dec">.0929</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1231</td> -<td class="area dec">.6300</td> -<td class="circumf int">124</td> -<td class="circumf dec">.4071</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1237</td> -<td class="area dec">.8582</td> -<td class="circumf int">124</td> -<td class="circumf dec">.7212</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1244</td> -<td class="area dec">.1021</td> -<td class="circumf int">125</td> -<td class="circumf dec">.0354</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1250</td> -<td class="area dec">.3617</td> -<td class="circumf int">125</td> -<td class="circumf dec">.3495</td> -</tr> - -<tr> -<td class="diam">40.0</td> -<td class="area int">1256</td> -<td class="area dec">.6371</td> -<td class="circumf int">125</td> -<td class="circumf dec">.6637</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1262</td> -<td class="area dec">.9281</td> -<td class="circumf int">125</td> -<td class="circumf dec">.9779</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1269</td> -<td class="area dec">.2348</td> -<td class="circumf int">126</td> -<td class="circumf dec">.2920</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1275</td> -<td class="area dec">.5573</td> -<td class="circumf int">126</td> -<td class="circumf dec">.6062</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1281</td> -<td class="area dec">.8955</td> -<td class="circumf int">126</td> -<td class="circumf dec">.9203</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1288</td> -<td class="area dec">.2493</td> -<td class="circumf int">127</td> -<td class="circumf dec">.2345</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1294</td> -<td class="area dec">.3189</td> -<td class="circumf int">127</td> -<td class="circumf dec">.5487</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1301</td> -<td class="area dec">.0042</td> -<td class="circumf int">127</td> -<td class="circumf dec">.8628</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1307</td> -<td class="area dec">.4052</td> -<td class="circumf int">128</td> -<td class="circumf dec">.1770</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1313</td> -<td class="area dec">.8219</td> -<td class="circumf int">128</td> -<td class="circumf dec">.4911</td> -</tr> - -<tr> -<td class="diam">41.0</td> -<td class="area int">1320</td> -<td class="area dec">.2543</td> -<td class="circumf int">128</td> -<td class="circumf dec">.8053</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1326</td> -<td class="area dec">.7024</td> -<td class="circumf int">129</td> -<td class="circumf dec">.1195</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1333</td> -<td class="area dec">.1663</td> -<td class="circumf int">129</td> -<td class="circumf dec">.4336</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1339</td> -<td class="area dec">.6458</td> -<td class="circumf int">129</td> -<td class="circumf dec">.7478</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1346</td> -<td class="area dec">.1410</td> -<td class="circumf int">130</td> -<td class="circumf dec">.0619</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1352</td> -<td class="area dec">.6520</td> -<td class="circumf int">130</td> -<td class="circumf dec">.3761</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1359</td> -<td class="area dec">.1786</td> -<td class="circumf int">130</td> -<td class="circumf dec">.6903</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1365</td> -<td class="area dec">.7210</td> -<td class="circumf int">131</td> -<td class="circumf dec">.0044</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1372</td> -<td class="area dec">.2791</td> -<td class="circumf int">131</td> -<td class="circumf dec">.3186</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1378</td> -<td class="area dec">.8529</td> -<td class="circumf int">131</td> -<td class="circumf dec">.6227</td> -</tr> - -<tr> -<td class="diam">42.0</td> -<td class="area int">1385</td> -<td class="area dec">.4424</td> -<td class="circumf int">131</td> -<td class="circumf dec">.9469</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1392</td> -<td class="area dec">.0476</td> -<td class="circumf int">132</td> -<td class="circumf dec">.2611</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1398</td> -<td class="area dec">.6685</td> -<td class="circumf int">132</td> -<td class="circumf dec">.5752</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1405</td> -<td class="area dec">.3051</td> -<td class="circumf int">132</td> -<td class="circumf dec">.8894</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1411</td> -<td class="area dec">.9574</td> -<td class="circumf int">133</td> -<td class="circumf dec">.2035</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1418</td> -<td class="area dec">.6254</td> -<td class="circumf int">133</td> -<td class="circumf dec">.5177</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1425</td> -<td class="area dec">.3092</td> -<td class="circumf int">133</td> -<td class="circumf dec">.8318</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1432</td> -<td class="area dec">.0086</td> -<td class="circumf int">134</td> -<td class="circumf dec">.1460</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1438</td> -<td class="area dec">.7238</td> -<td class="circumf int">134</td> -<td class="circumf dec">.4602</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1445</td> -<td class="area dec">.4546</td> -<td class="circumf int">134</td> -<td class="circumf dec">.7743</td> -</tr> - -<tr> -<td class="diam">43.0</td> -<td class="area int">1452</td> -<td class="area dec">.2012</td> -<td class="circumf int">135</td> -<td class="circumf dec">.0885</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1458</td> -<td class="area dec">.9635</td> -<td class="circumf int">135</td> -<td class="circumf dec">.4026</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1465</td> -<td class="area dec">.7415</td> -<td class="circumf int">135</td> -<td class="circumf dec">.7168</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1472</td> -<td class="area dec">.5352</td> -<td class="circumf int">136</td> -<td class="circumf dec">.0310</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1479</td> -<td class="area dec">.3446</td> -<td class="circumf int">136</td> -<td class="circumf dec">.3451</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1486</td> -<td class="area dec">.1697</td> -<td class="circumf int">136</td> -<td class="circumf dec">.6593</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1493</td> -<td class="area dec">.0105</td> -<td class="circumf int">136</td> -<td class="circumf dec">.9734</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1499</td> -<td class="area dec">.8670</td> -<td class="circumf int">137</td> -<td class="circumf dec">.2876</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1506</td> -<td class="area dec">.7393</td> -<td class="circumf int">137</td> -<td class="circumf dec">.6018</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1513</td> -<td class="area dec">.6272</td> -<td class="circumf int">137</td> -<td class="circumf dec">.9159</td> -</tr> - -<tr> -<td class="diam">44.0<span class="pagenum" id="Page277">[277]</span></td> -<td class="area int">1520</td> -<td class="area dec">.5308</td> -<td class="circumf int">138</td> -<td class="circumf dec">.2301</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1527</td> -<td class="area dec">.4502</td> -<td class="circumf int">138</td> -<td class="circumf dec">.5442</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1534</td> -<td class="area dec">.3853</td> -<td class="circumf int">138</td> -<td class="circumf dec">.8584</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1541</td> -<td class="area dec">.3360</td> -<td class="circumf int">139</td> -<td class="circumf dec">.1726</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1548</td> -<td class="area dec">.3025</td> -<td class="circumf int">139</td> -<td class="circumf dec">.4867</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1555</td> -<td class="area dec">.2847</td> -<td class="circumf int">139</td> -<td class="circumf dec">.8009</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1562</td> -<td class="area dec">.2826</td> -<td class="circumf int">140</td> -<td class="circumf dec">.1153</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1569</td> -<td class="area dec">.2063</td> -<td class="circumf int">140</td> -<td class="circumf dec">.4292</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1576</td> -<td class="area dec">.3255</td> -<td class="circumf int">140</td> -<td class="circumf dec">.7434</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1583</td> -<td class="area dec">.3706</td> -<td class="circumf int">141</td> -<td class="circumf dec">.0575</td> -</tr> - -<tr> -<td class="diam">45.0</td> -<td class="area int">1590</td> -<td class="area dec">.4313</td> -<td class="circumf int">141</td> -<td class="circumf dec">.3717</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1597</td> -<td class="area dec">.5077</td> -<td class="circumf int">141</td> -<td class="circumf dec">.6858</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1604</td> -<td class="area dec">.5999</td> -<td class="circumf int">142</td> -<td class="circumf dec">.0000</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1611</td> -<td class="area dec">.7077</td> -<td class="circumf int">142</td> -<td class="circumf dec">.3142</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1618</td> -<td class="area dec">.8313</td> -<td class="circumf int">142</td> -<td class="circumf dec">.6283</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1625</td> -<td class="area dec">.9705</td> -<td class="circumf int">142</td> -<td class="circumf dec">.9425</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1633</td> -<td class="area dec">.1255</td> -<td class="circumf int">143</td> -<td class="circumf dec">.2566</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1640</td> -<td class="area dec">.2962</td> -<td class="circumf int">143</td> -<td class="circumf dec">.5708</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1647</td> -<td class="area dec">.4826</td> -<td class="circumf int">143</td> -<td class="circumf dec">.8849</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1654</td> -<td class="area dec">.6847</td> -<td class="circumf int">144</td> -<td class="circumf dec">.1991</td> -</tr> - -<tr> -<td class="diam">46.0</td> -<td class="area int">1661</td> -<td class="area dec">.9025</td> -<td class="circumf int">144</td> -<td class="circumf dec">.5133</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1669</td> -<td class="area dec">.1360</td> -<td class="circumf int">144</td> -<td class="circumf dec">.8274</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1676</td> -<td class="area dec">.3853</td> -<td class="circumf int">145</td> -<td class="circumf dec">.1416</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1683</td> -<td class="area dec">.6502</td> -<td class="circumf int">145</td> -<td class="circumf dec">.4557</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1690</td> -<td class="area dec">.9308</td> -<td class="circumf int">145</td> -<td class="circumf dec">.7699</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1698</td> -<td class="area dec">.2272</td> -<td class="circumf int">146</td> -<td class="circumf dec">.0841</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1705</td> -<td class="area dec">.5392</td> -<td class="circumf int">146</td> -<td class="circumf dec">.3982</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1712</td> -<td class="area dec">.8670</td> -<td class="circumf int">146</td> -<td class="circumf dec">.7124</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1720</td> -<td class="area dec">.2105</td> -<td class="circumf int">147</td> -<td class="circumf dec">.0265</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1727</td> -<td class="area dec">.5697</td> -<td class="circumf int">147</td> -<td class="circumf dec">.3407</td> -</tr> - -<tr> -<td class="diam">47.0</td> -<td class="area int">1734</td> -<td class="area dec">.9445</td> -<td class="circumf int">147</td> -<td class="circumf dec">.6550</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1742</td> -<td class="area dec">.3351</td> -<td class="circumf int">147</td> -<td class="circumf dec">.9690</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1749</td> -<td class="area dec">.7414</td> -<td class="circumf int">148</td> -<td class="circumf dec">.2832</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1757</td> -<td class="area dec">.1635</td> -<td class="circumf int">148</td> -<td class="circumf dec">.5973</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1764</td> -<td class="area dec">.6012</td> -<td class="circumf int">148</td> -<td class="circumf dec">.9115</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1772</td> -<td class="area dec">.0546</td> -<td class="circumf int">149</td> -<td class="circumf dec">.2257</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1779</td> -<td class="area dec">.5237</td> -<td class="circumf int">149</td> -<td class="circumf dec">.5398</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1787</td> -<td class="area dec">.0086</td> -<td class="circumf int">149</td> -<td class="circumf dec">.8540</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1794</td> -<td class="area dec">.5091</td> -<td class="circumf int">150</td> -<td class="circumf dec">.1681</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1802</td> -<td class="area dec">.0254</td> -<td class="circumf int">150</td> -<td class="circumf dec">.4823</td> -</tr> - -<tr> -<td class="diam">48.0</td> -<td class="area int">1809</td> -<td class="area dec">.5574</td> -<td class="circumf int">150</td> -<td class="circumf dec">.7964</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1817</td> -<td class="area dec">.1050</td> -<td class="circumf int">151</td> -<td class="circumf dec">.1105</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1824</td> -<td class="area dec">.6684</td> -<td class="circumf int">151</td> -<td class="circumf dec">.4248</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1832</td> -<td class="area dec">.2475</td> -<td class="circumf int">151</td> -<td class="circumf dec">.7389</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1839</td> -<td class="area dec">.8423</td> -<td class="circumf int">152</td> -<td class="circumf dec">.0531</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1847</td> -<td class="area dec">.4528</td> -<td class="circumf int">152</td> -<td class="circumf dec">.3672</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1855</td> -<td class="area dec">.0790</td> -<td class="circumf int">152</td> -<td class="circumf dec">.6814</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1862</td> -<td class="area dec">.7210</td> -<td class="circumf int">152</td> -<td class="circumf dec">.9956</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1870</td> -<td class="area dec">.3786</td> -<td class="circumf int">153</td> -<td class="circumf dec">.3097</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1878</td> -<td class="area dec">.0519</td> -<td class="circumf int">153</td> -<td class="circumf dec">.6239</td> -</tr> - -<tr> -<td class="diam">49.0</td> -<td class="area int">1885</td> -<td class="area dec">.7409</td> -<td class="circumf int">153</td> -<td class="circumf dec">.9380</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1893</td> -<td class="area dec">.4457</td> -<td class="circumf int">154</td> -<td class="circumf dec">.2522</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1901</td> -<td class="area dec">.1662</td> -<td class="circumf int">154</td> -<td class="circumf dec">.5664</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1908</td> -<td class="area dec">.9024</td> -<td class="circumf int">154</td> -<td class="circumf dec">.8805</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1916</td> -<td class="area dec">.6543</td> -<td class="circumf int">155</td> -<td class="circumf dec">.1947</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">1924</td> -<td class="area dec">.4218</td> -<td class="circumf int">155</td> -<td class="circumf dec">.5088</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">1932</td> -<td class="area dec">.2051</td> -<td class="circumf int">155</td> -<td class="circumf dec">.8230</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">1940</td> -<td class="area dec">.0042</td> -<td class="circumf int">156</td> -<td class="circumf dec">.1372</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">1947</td> -<td class="area dec">.8189</td> -<td class="circumf int">156</td> -<td class="circumf dec">.4513</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">1955</td> -<td class="area dec">.6493</td> -<td class="circumf int">156</td> -<td class="circumf dec">.7655</td> -</tr> - -<tr> -<td class="diam">50.0</td> -<td class="area int">1963</td> -<td class="area dec">.4954</td> -<td class="circumf int">157</td> -<td class="circumf dec">.0796</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">1971</td> -<td class="area dec">.3572</td> -<td class="circumf int">157</td> -<td class="circumf dec">.3938</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">1979</td> -<td class="area dec">.2348</td> -<td class="circumf int">157</td> -<td class="circumf dec">.7080</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">1987</td> -<td class="area dec">.1280</td> -<td class="circumf int">158</td> -<td class="circumf dec">.0221</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">1995</td> -<td class="area dec">.0370</td> -<td class="circumf int">158</td> -<td class="circumf dec">.3363</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">2002</td> -<td class="area dec">.9617</td> -<td class="circumf int">158</td> -<td class="circumf dec">.6504</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">2010</td> -<td class="area dec">.9020</td> -<td class="circumf int">158</td> -<td class="circumf dec">.9646</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">2018</td> -<td class="area dec">.8581</td> -<td class="circumf int">159</td> -<td class="circumf dec">.2787</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">2026</td> -<td class="area dec">.8299</td> -<td class="circumf int">159</td> -<td class="circumf dec">.5929</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">2034</td> -<td class="area dec">.8174</td> -<td class="circumf int">159</td> -<td class="circumf dec">.9071</td> -</tr> - -<tr> -<td class="diam">51.0</td> -<td class="area int">2042</td> -<td class="area dec">.6206</td> -<td class="circumf int">160</td> -<td class="circumf dec">.2212</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">2050</td> -<td class="area dec">.8895</td> -<td class="circumf int">160</td> -<td class="circumf dec">.5354</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">2058</td> -<td class="area dec">.8742</td> -<td class="circumf int">160</td> -<td class="circumf dec">.8495</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">2066</td> -<td class="area dec">.9245</td> -<td class="circumf int">161</td> -<td class="circumf dec">.1637</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">2074</td> -<td class="area dec">.9905</td> -<td class="circumf int">161</td> -<td class="circumf dec">.4779</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">2083</td> -<td class="area dec">.0723</td> -<td class="circumf int">161</td> -<td class="circumf dec">.7920</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">2091</td> -<td class="area dec">.1697</td> -<td class="circumf int">162</td> -<td class="circumf dec">.1062</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">2099</td> -<td class="area dec">.2829</td> -<td class="circumf int">162</td> -<td class="circumf dec">.4203</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">2107</td> -<td class="area dec">.4118</td> -<td class="circumf int">162</td> -<td class="circumf dec">.7345</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">2115</td> -<td class="area dec">.5563</td> -<td class="circumf int">163</td> -<td class="circumf dec">.0487</td> -</tr> - -<tr> -<td class="diam">52.0</td> -<td class="area int">2123</td> -<td class="area dec">.7166</td> -<td class="circumf int">163</td> -<td class="circumf dec">.3628</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">2131</td> -<td class="area dec">.8926</td> -<td class="circumf int">163</td> -<td class="circumf dec">.6770</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">2140</td> -<td class="area dec">.0843</td> -<td class="circumf int">163</td> -<td class="circumf dec">.9911</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">2148</td> -<td class="area dec">.2917</td> -<td class="circumf int">164</td> -<td class="circumf dec">.3053</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">2156</td> -<td class="area dec">.5149</td> -<td class="circumf int">164</td> -<td class="circumf dec">.6195</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">2164</td> -<td class="area dec">.7537</td> -<td class="circumf int">164</td> -<td class="circumf dec">.9336</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">2173</td> -<td class="area dec">.0082</td> -<td class="circumf int">165</td> -<td class="circumf dec">.2479</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">2181</td> -<td class="area dec">.2785</td> -<td class="circumf int">165</td> -<td class="circumf dec">.5619</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">2189</td> -<td class="area dec">.5644</td> -<td class="circumf int">165</td> -<td class="circumf dec">.8761</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">2197</td> -<td class="area dec">.8661</td> -<td class="circumf int">166</td> -<td class="circumf dec">.1903</td> -</tr> - -<tr> -<td class="diam">53.0</td> -<td class="area int">2206</td> -<td class="area dec">.1834</td> -<td class="circumf int">166</td> -<td class="circumf dec">.5044</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">2214</td> -<td class="area dec">.5165</td> -<td class="circumf int">166</td> -<td class="circumf dec">.8186</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">2222</td> -<td class="area dec">.8653</td> -<td class="circumf int">167</td> -<td class="circumf dec">.1327</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">2231</td> -<td class="area dec">.2298</td> -<td class="circumf int">167</td> -<td class="circumf dec">.4469</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">2239</td> -<td class="area dec">.6100</td> -<td class="circumf int">167</td> -<td class="circumf dec">.7610</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">2248</td> -<td class="area dec">.0059</td> -<td class="circumf int">168</td> -<td class="circumf dec">.0752</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">2256</td> -<td class="area dec">.4175</td> -<td class="circumf int">168</td> -<td class="circumf dec">.3894</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">2264</td> -<td class="area dec">.8448</td> -<td class="circumf int">168</td> -<td class="circumf dec">.7035</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">2273</td> -<td class="area dec">.2879</td> -<td class="circumf int">169</td> -<td class="circumf dec">.0177</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">2281</td> -<td class="area dec">.7466</td> -<td class="circumf int">169</td> -<td class="circumf dec">.3318</td> -</tr> - -<tr> -<td class="diam">54.0</td> -<td class="area int">2290</td> -<td class="area dec">.2210</td> -<td class="circumf int">169</td> -<td class="circumf dec">.6460</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">2298</td> -<td class="area dec">.7112</td> -<td class="circumf int">169</td> -<td class="circumf dec">.9602</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">2307</td> -<td class="area dec">.2171</td> -<td class="circumf int">170</td> -<td class="circumf dec">.2743</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">2315</td> -<td class="area dec">.7386</td> -<td class="circumf int">170</td> -<td class="circumf dec">.5885</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">2324</td> -<td class="area dec">.2759</td> -<td class="circumf int">170</td> -<td class="circumf dec">.9026</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">2332</td> -<td class="area dec">.8289</td> -<td class="circumf int">171</td> -<td class="circumf dec">.2168</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">2341</td> -<td class="area dec">.3976</td> -<td class="circumf int">171</td> -<td class="circumf dec">.5310</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">2349</td> -<td class="area dec">.9820</td> -<td class="circumf int">171</td> -<td class="circumf dec">.8451</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">2358</td> -<td class="area dec">.5821</td> -<td class="circumf int">172</td> -<td class="circumf dec">.1593</td> -</tr> - -<tr> -<td class="diam">  .9</td> -<td class="area int">2367</td> -<td class="area dec">.1979</td> -<td class="circumf int">172</td> -<td class="circumf dec">.4735</td> -</tr> - -<tr> -<td class="diam">55.0</td> -<td class="area int">2375</td> -<td class="area dec">.8294</td> -<td class="circumf int">172</td> -<td class="circumf dec">.7876</td> -</tr> - -<tr> -<td class="diam">  .1</td> -<td class="area int">2384</td> -<td class="area dec">.4767</td> -<td class="circumf int">173</td> -<td class="circumf dec">.1017</td> -</tr> - -<tr> -<td class="diam">  .2</td> -<td class="area int">2393</td> -<td class="area dec">.1396</td> -<td class="circumf int">173</td> -<td class="circumf dec">.4159</td> -</tr> - -<tr> -<td class="diam">  .3</td> -<td class="area int">2401</td> -<td class="area dec">.8183</td> -<td class="circumf int">173</td> -<td class="circumf dec">.7301</td> -</tr> - -<tr> -<td class="diam">  .4</td> -<td class="area int">2410</td> -<td class="area dec">.5126</td> -<td class="circumf int">174</td> -<td class="circumf dec">.0442</td> -</tr> - -<tr> -<td class="diam">  .5</td> -<td class="area int">2419</td> -<td class="area dec">.2227</td> -<td class="circumf int">174</td> -<td class="circumf dec">.3584</td> -</tr> - -<tr> -<td class="diam">  .6</td> -<td class="area int">2427</td> -<td class="area dec">.9485</td> -<td class="circumf int">174</td> -<td class="circumf dec">.6726</td> -</tr> - -<tr> -<td class="diam">  .7</td> -<td class="area int">2436</td> -<td class="area dec">.6899</td> -<td class="circumf int">174</td> -<td class="circumf dec">.9867</td> -</tr> - -<tr> -<td class="diam">  .8</td> -<td class="area int">2145</td> -<td class="area dec">.4471</td> -<td class="circumf int">175</td> -<td class="circumf dec">.3009</td> -</tr> - -<tr class="bb"> -<td class="diam">  .9</td> -<td class="area int">2454</td> -<td class="area dec">.2200</td> -<td class="circumf int">175</td> -<td class="circumf dec">.6150</td> -</tr> - -</table> - -<p><span class="pagenum" id="Page278">[278]</span></p> - -<h3 class="center">UNITED STATES STANDARD SIZES OF WROUGHT IRON WELDED PIPE.</h3> - -<table class="ironpipe" summary="Pipes"> - -<tr class="bt bb"> -<th colspan="2" class="br">Inside<br />diam-<br />eter<br />nom.</th> -<th colspan="2" class="br">Actual<br />outside<br />Diam-<br />eter.</th> -<th class="br">Thick-<br />ness.</th> -<th colspan="2" class="br">Actual<br />Inside<br />Diam-<br />eter.</th> -<th colspan="2" class="br">External<br />circum-<br />ference.</th> -<th colspan="2" class="br">Internal<br />circum-<br />ference.</th> -<th colspan="2" class="br">Length<br />of pipe<br />per<br />square<br />foot of<br />outside<br />surface.</th> -<th colspan="2" class="br">Length<br />of pipe<br />per<br />square<br />foot of<br />inside<br />surface.</th> -<th colspan="2" class="br">External<br />area.</th> -<th colspan="2" class="br">Actual<br />internal<br />area.</th> -<th colspan="2" class="br">Length<br />of pipe<br />con-<br />taining<br />one<br />cubic<br />foot.</th> -<th colspan="2" class="br">Weight<br />per<br />foot of<br />length.</th> -<th colspan="2" class="br">No. of<br />threads<br />per<br />Inch<br />of<br />screw.</th> -<th>Length<br />perfect<br />screw.</th> -</tr> - -<tr> -<td class="int"> </td> -<td class="frac br"><sup>1</sup>⁄<sub>8</sub></td> -<td> </td> -<td class="dec br">.405</td> -<td class="center br">.068</td> -<td class="int">0</td> -<td class="frac br">.269</td> -<td class="int">1</td> -<td class="frac br">.272</td> -<td class="int">0</td> -<td class="frac br">.848</td> -<td class="int">9</td> -<td class="frac br">.440</td> -<td class="int">14</td> -<td class="frac br">.15</td> -<td> </td> -<td class="dec br">.129</td> -<td> </td> -<td class="dec br">.0572</td> -<td class="int">2500</td> -<td class="dec br">.</td> -<td> </td> -<td class="dec br">.243</td> -<td class="int">27</td> -<td class="frac br"> </td> -<td class="center">0.19</td> -</tr> - -<tr> -<td class="int"> </td> -<td class="frac br"><sup>1</sup>⁄<sub>4</sub></td> -<td> </td> -<td class="dec br">.54</td> -<td class="center br">.088</td> -<td class="int">0</td> -<td class="frac br">.364</td> -<td class="int">1</td> -<td class="frac br">.696</td> -<td class="int">1</td> -<td class="frac br">.144</td> -<td class="int">7</td> -<td class="frac br">.075</td> -<td class="int">10</td> -<td class="frac br">.50</td> -<td> </td> -<td class="dec br">.229</td> -<td> </td> -<td class="dec br">.1041</td> -<td class="int">1385</td> -<td class="dec br">.</td> -<td> </td> -<td class="dec br">.422</td> -<td class="int">18</td> -<td class="frac br"> </td> -<td class="center">0.29</td> -</tr> - -<tr> -<td class="int"> </td> -<td class="frac br"><sup>3</sup>⁄<sub>8</sub></td> -<td> </td> -<td class="dec br">.675</td> -<td class="center br">.091</td> -<td class="int">0</td> -<td class="frac br">.493</td> -<td class="int">2</td> -<td class="frac br">.121</td> -<td class="int">1</td> -<td class="frac br">.552</td> -<td class="int">5</td> -<td class="frac br">.657</td> -<td class="int">7</td> -<td class="frac br">.67</td> -<td> </td> -<td class="dec br">.358</td> -<td> </td> -<td class="dec br">.1916</td> -<td class="int">751</td> -<td class="frac br">.5</td> -<td> </td> -<td class="dec br">.561</td> -<td class="int">18</td> -<td class="frac br"> </td> -<td class="center">0.30</td> -</tr> - -<tr> -<td class="int"> </td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td> </td> -<td class="dec br">.840</td> -<td class="center br">.109</td> -<td class="int">0</td> -<td class="frac br">.622</td> -<td class="int">2</td> -<td class="frac br">.652</td> -<td class="int">1</td> -<td class="frac br">.957</td> -<td class="int">4</td> -<td class="frac br">.502</td> -<td class="int">6</td> -<td class="frac br">.13</td> -<td> </td> -<td class="dec br">.554</td> -<td> </td> -<td class="dec br">.3048</td> -<td class="int">472</td> -<td class="frac br">.4</td> -<td> </td> -<td class="dec br">.845</td> -<td class="int">14</td> -<td class="frac br"> </td> -<td class="center">0.39</td> -</tr> - -<tr> -<td class="int"> </td> -<td class="frac br"><sup>3</sup>⁄<sub>4</sub></td> -<td class="int">1</td> -<td class="frac br">.050</td> -<td class="center br">.113</td> -<td class="int">0</td> -<td class="frac br">.824</td> -<td class="int">3</td> -<td class="frac br">.299</td> -<td class="int">2</td> -<td class="frac br">.589</td> -<td class="int">3</td> -<td class="frac br">.637</td> -<td class="int">4</td> -<td class="frac br">.635</td> -<td> </td> -<td class="dec br">.866</td> -<td> </td> -<td class="dec br">.5333</td> -<td class="int">270</td> -<td class="frac br">.0</td> -<td class="int">1</td> -<td class="frac br">.126</td> -<td class="int">14</td> -<td class="frac br"> </td> -<td class="center">0.40</td> -</tr> - -<tr> -<td class="int">1</td> -<td class="frac br"> </td> -<td class="int">1</td> -<td class="frac br">.315</td> -<td class="center br">.134</td> -<td class="int">1</td> -<td class="frac br">.047</td> -<td class="int">4</td> -<td class="frac br">.134</td> -<td class="int">3</td> -<td class="frac br">.292</td> -<td class="int">2</td> -<td class="frac br">.903</td> -<td class="int">3</td> -<td class="frac br">.679</td> -<td class="int">1</td> -<td class="frac br">.357</td> -<td> </td> -<td class="dec br">.8627</td> -<td class="int">166</td> -<td class="frac br">.9</td> -<td class="int">1</td> -<td class="frac br">.670</td> -<td class="int">11</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="center">0.51</td> -</tr> - -<tr> -<td class="int">1</td> -<td class="frac br"><sup>1</sup>⁄<sub>4</sub></td> -<td class="int">1</td> -<td class="frac br">.660</td> -<td class="center br">.140</td> -<td class="int">1</td> -<td class="frac br">.38</td> -<td class="int">5</td> -<td class="frac br">.215</td> -<td class="int">4</td> -<td class="frac br">.335</td> -<td class="int">2</td> -<td class="frac br">.301</td> -<td class="int">2</td> -<td class="frac br">.768</td> -<td class="int">2</td> -<td class="frac br">.164</td> -<td class="int">1</td> -<td class="frac br">.496</td> -<td class="int">96</td> -<td class="frac br">.25</td> -<td class="int">2</td> -<td class="frac br">.258</td> -<td class="int">11</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="center">0.54</td> -</tr> - -<tr> -<td class="int">1</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="int">1</td> -<td class="frac br">.90</td> -<td class="center br">.145</td> -<td class="int">1</td> -<td class="frac br">.61</td> -<td class="int">5</td> -<td class="frac br">.969</td> -<td class="int">5</td> -<td class="frac br">.061</td> -<td class="int">2</td> -<td class="frac br">.010</td> -<td class="int">2</td> -<td class="frac br">.371</td> -<td class="int">2</td> -<td class="frac br">.835</td> -<td class="int">2</td> -<td class="frac br">.038</td> -<td class="int">70</td> -<td class="frac br">.65</td> -<td class="int">2</td> -<td class="frac br">.694</td> -<td class="int">11</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="center">0.55</td> -</tr> - -<tr> -<td class="int">2</td> -<td class="frac br"> </td> -<td class="int">2</td> -<td class="frac br">.375</td> -<td class="center br">.154</td> -<td class="int">2</td> -<td class="frac br">.067</td> -<td class="int">7</td> -<td class="frac br">.461</td> -<td class="int">6</td> -<td class="frac br">.494</td> -<td class="int">1</td> -<td class="frac br">.611</td> -<td class="int">1</td> -<td class="frac br">.848</td> -<td class="int">4</td> -<td class="frac br">.430</td> -<td class="int">3</td> -<td class="frac br">.355</td> -<td class="int">42</td> -<td class="frac br">.36</td> -<td class="int">3</td> -<td class="frac br">.667</td> -<td class="int">11</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="center">0.58</td> -</tr> - -<tr> -<td class="int">2</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="int">2</td> -<td class="frac br">.875</td> -<td class="center br">.204</td> -<td class="int">2</td> -<td class="frac br">.467</td> -<td class="int">9</td> -<td class="frac br">.032</td> -<td class="int">7</td> -<td class="frac br">.754</td> -<td class="int">1</td> -<td class="frac br">.328</td> -<td class="int">1</td> -<td class="frac br">.547</td> -<td class="int">6</td> -<td class="frac br">.491</td> -<td class="int">4</td> -<td class="frac br">.783</td> -<td class="int">30</td> -<td class="frac br">.11</td> -<td class="int">5</td> -<td class="frac br">.773</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">0.89</td> -</tr> - -<tr> -<td class="int">3</td> -<td class="frac br"> </td> -<td class="int">3</td> -<td class="frac br">.50</td> -<td class="center br">.217</td> -<td class="int">3</td> -<td class="frac br">.066</td> -<td class="int">10</td> -<td class="frac br">.996</td> -<td class="int">9</td> -<td class="frac br">.636</td> -<td class="int">1</td> -<td class="frac br">.091</td> -<td class="int">1</td> -<td class="frac br">.245</td> -<td class="int">9</td> -<td class="frac br">.621</td> -<td class="int">7</td> -<td class="frac br">.388</td> -<td class="int">19</td> -<td class="frac br">.40</td> -<td class="int">7</td> -<td class="frac br">.547</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">0.95</td> -</tr> - -<tr> -<td class="int">3</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="int">4</td> -<td class="frac br">.0</td> -<td class="center br">.226</td> -<td class="int">3</td> -<td class="frac br">.548</td> -<td class="int">12</td> -<td class="frac br">.566</td> -<td class="int">11</td> -<td class="frac br">.146</td> -<td> </td> -<td class="dec br">.955</td> -<td class="int">1</td> -<td class="frac br">.077</td> -<td class="int">12</td> -<td class="frac br">.566</td> -<td class="int">9</td> -<td class="frac br">.837</td> -<td class="int">14</td> -<td class="frac br">.56</td> -<td class="int">9</td> -<td class="frac br">.055</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.00</td> -</tr> - -<tr> -<td class="int">4</td> -<td class="frac br"> </td> -<td class="int">4</td> -<td class="frac br">.50</td> -<td class="center br">.237</td> -<td class="int">4</td> -<td class="frac br">.026</td> -<td class="int">14</td> -<td class="frac br">.137</td> -<td class="int">12</td> -<td class="frac br">.648</td> -<td> </td> -<td class="dec br">.849</td> -<td class="int">0</td> -<td class="frac br">.949</td> -<td class="int">15</td> -<td class="frac br">.901</td> -<td class="int">12</td> -<td class="frac br">.730</td> -<td class="int">11</td> -<td class="frac br">.31</td> -<td class="int">10</td> -<td class="frac br">.728</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.05</td> -</tr> - -<tr> -<td class="int">4</td> -<td class="frac br"><sup>1</sup>⁄<sub>2</sub></td> -<td class="int">5</td> -<td class="frac br">.0</td> -<td class="center br">.247</td> -<td class="int">4</td> -<td class="frac br">.506</td> -<td class="int">15</td> -<td class="frac br">.708</td> -<td class="int">14</td> -<td class="frac br">.153</td> -<td> </td> -<td class="dec br">.765</td> -<td class="int">0</td> -<td class="frac br">.848</td> -<td class="int">19</td> -<td class="frac br">.635</td> -<td class="int">15</td> -<td class="frac br">.939</td> -<td class="int">9</td> -<td class="frac br">.03</td> -<td class="int">12</td> -<td class="frac br">.492</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.10</td> -</tr> - -<tr> -<td class="int">5</td> -<td class="frac br"> </td> -<td class="int">5</td> -<td class="frac br">.563</td> -<td class="center br">.259</td> -<td class="int">5</td> -<td class="frac br">.045</td> -<td class="int">17</td> -<td class="frac br">.475</td> -<td class="int">15</td> -<td class="frac br">.849</td> -<td> </td> -<td class="dec br">.629</td> -<td class="int">0</td> -<td class="frac br">.757</td> -<td class="int">24</td> -<td class="frac br">.299</td> -<td class="int">19</td> -<td class="frac br">.990</td> -<td class="int">7</td> -<td class="frac br">.20</td> -<td class="int">14</td> -<td class="frac br">.564</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.16</td> -</tr> - -<tr> -<td class="int">6</td> -<td class="frac br"> </td> -<td class="int">6</td> -<td class="frac br">.625</td> -<td class="center br">.280</td> -<td class="int">5</td> -<td class="frac br">.065</td> -<td class="int">20</td> -<td class="frac br">.813</td> -<td class="int">19</td> -<td class="frac br">.054</td> -<td> </td> -<td class="dec br">.577</td> -<td class="int">0</td> -<td class="frac br">.630</td> -<td class="int">34</td> -<td class="frac br">.471</td> -<td class="int">28</td> -<td class="frac br">.889</td> -<td class="int">4</td> -<td class="frac br">.98</td> -<td class="int">18</td> -<td class="frac br">.767</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.26</td> -</tr> - -<tr> -<td class="int">7</td> -<td class="frac br"> </td> -<td class="int">7</td> -<td class="frac br">.625</td> -<td class="center br">.301</td> -<td class="int">7</td> -<td class="frac br">.023</td> -<td class="int">23</td> -<td class="frac br">.954</td> -<td class="int">22</td> -<td class="frac br">.063</td> -<td> </td> -<td class="dec br">.505</td> -<td class="int">0</td> -<td class="frac br">.544</td> -<td class="int">45</td> -<td class="frac br">.663</td> -<td class="int">38</td> -<td class="frac br">.737</td> -<td class="int">3</td> -<td class="frac br">.72</td> -<td class="int">23</td> -<td class="frac br">.410</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.36</td> -</tr> - -<tr> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="int">8</td> -<td class="frac br">.625</td> -<td class="center br">.322</td> -<td class="int">7</td> -<td class="frac br">.981</td> -<td class="int">27</td> -<td class="frac br">.096</td> -<td class="int">25</td> -<td class="frac br">.076</td> -<td> </td> -<td class="dec br">.444</td> -<td class="int">0</td> -<td class="frac br">.478</td> -<td class="int">58</td> -<td class="frac br">.426</td> -<td class="int">50</td> -<td class="frac br">.039</td> -<td class="int">2</td> -<td class="frac br">.88</td> -<td class="int">28</td> -<td class="frac br">.348</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.46</td> -</tr> - -<tr> -<td class="int">9</td> -<td class="frac br"> </td> -<td class="int">9</td> -<td class="frac br">.688</td> -<td class="center br">.344</td> -<td class="int">9</td> -<td class="frac br">.00</td> -<td class="int">30</td> -<td class="frac br">.433</td> -<td class="int">28</td> -<td class="frac br">.277</td> -<td> </td> -<td class="dec br">.394</td> -<td class="int">0</td> -<td class="frac br">.425</td> -<td class="int">73</td> -<td class="frac br">.715</td> -<td class="int">63</td> -<td class="frac br">.633</td> -<td class="int">2</td> -<td class="frac br">.26</td> -<td class="int">34</td> -<td class="frac br">.677</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.57</td> -</tr> - -<tr class="bb"> -<td class="int">10</td> -<td class="frac br"> </td> -<td class="int">10</td> -<td class="frac br">.750</td> -<td class="center br">.366</td> -<td class="int">10</td> -<td class="frac br">.018</td> -<td class="int">33</td> -<td class="frac br">.772</td> -<td class="int">31</td> -<td class="frac br">.475</td> -<td> </td> -<td class="dec br">.355</td> -<td class="int">0</td> -<td class="frac br">.381</td> -<td class="int">90</td> -<td class="frac br">.762</td> -<td class="int">78</td> -<td class="frac br">.838</td> -<td class="int">1</td> -<td class="frac br">.80</td> -<td class="int">40</td> -<td class="frac br">.641</td> -<td class="int">8</td> -<td class="frac br"> </td> -<td class="center">1.68</td> -</tr> - -</table> - -<p class="fsize90">Thread taper three-fourths inch to one foot.</p> - -<p class="fsize90">All pipe below 1<sup>1</sup>⁄<sub>2</sub> inches is butt-welded, and -proved to 300 pounds per square inch; 1<sup>1</sup>⁄<sub>2</sub> inch and above is lap-welded and proved -to 500 pounds per square inch.</p> - -<p><span class="pagenum" id="Page279">[279]</span></p> - -<h3 class="center">STANDARDS FOR WIRE GAUGES IN USE IN THE UNITED STATES.<br /> -Dimensions of Sizes in Decimal Parts of an Inch.</h3> - -<table class="gauges" summary="Gauges"> - -<tr class="bt bb"> -<th class="br">Number<br />of Wire<br />Gauge.</th> -<th class="br">American<br />or<br />Brown<br />&<br />Sharpe.</th> -<th class="br">Birming-<br />ham,<br />or<br />Stubs’<br />Wire.</th> -<th class="br">Washburn<br />& Moen<br />Mfg. Co.,<br />Worces-<br />ter, Ms.</th> -<th class="br">Impe-<br />rial<br />Wire<br />Gauge.</th> -<th class="br">Stubs’<br />Steel<br />Wire.</th> -<th class="br">U. S.<br />Stand.<br />for<br />Plate.</th> -<th>Number<br />of Wire<br />Gauge.</th> -</tr> - -<tr> -<td class="gauge br">000000</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="numbers">.464</td> -<td class="center br">....</td> -<td class="numbers">.46875</td> -<td class="gauge">000000</td> -</tr> - -<tr> -<td class="gauge br">00000</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="numbers">.432</td> -<td class="center br">....</td> -<td class="numbers">.4375</td> -<td class="gauge">00000</td> -</tr> - -<tr> -<td class="gauge br">0000</td> -<td class="numbers">.46</td> -<td class="numbers">.454</td> -<td class="numbers">.3938</td> -<td class="numbers">.400</td> -<td class="center br">....</td> -<td class="numbers">.40625</td> -<td class="gauge">0000</td> -</tr> - -<tr> -<td class="gauge br">000</td> -<td class="numbers">.40964</td> -<td class="numbers">.425</td> -<td class="numbers">.3625</td> -<td class="numbers">.372</td> -<td class="center br">....</td> -<td class="numbers">.375</td> -<td class="gauge">000</td> -</tr> - -<tr> -<td class="gauge br">00</td> -<td class="numbers">.3648</td> -<td class="numbers">.38</td> -<td class="numbers">.3310</td> -<td class="numbers">.348</td> -<td class="center br">....</td> -<td class="numbers">.34375</td> -<td class="gauge">00</td> -</tr> - -<tr> -<td class="gauge br">0</td> -<td class="numbers">.32486</td> -<td class="numbers">.34</td> -<td class="numbers">.3065</td> -<td class="numbers">.324</td> -<td class="center br">....</td> -<td class="numbers">.3125</td> -<td class="gauge">0</td> -</tr> - -<tr> -<td class="gauge br">1</td> -<td class="numbers">.2893</td> -<td class="numbers">.3</td> -<td class="numbers">.2830</td> -<td class="numbers">.300</td> -<td class="numbers">.227</td> -<td class="numbers">.28125</td> -<td class="gauge">1</td> -</tr> - -<tr> -<td class="gauge br">2</td> -<td class="numbers">.25763</td> -<td class="numbers">.284</td> -<td class="numbers">.2625</td> -<td class="numbers">.276</td> -<td class="numbers">.219</td> -<td class="numbers">.265625</td> -<td class="gauge">2</td> -</tr> - -<tr> -<td class="gauge br">3</td> -<td class="numbers">.22942</td> -<td class="numbers">.259</td> -<td class="numbers">.2437</td> -<td class="numbers">.252</td> -<td class="numbers">.212</td> -<td class="numbers">.25</td> -<td class="gauge">3</td> -</tr> - -<tr> -<td class="gauge br">4</td> -<td class="numbers">.20431</td> -<td class="numbers">.238</td> -<td class="numbers">.2253</td> -<td class="numbers">.232</td> -<td class="numbers">.207</td> -<td class="numbers">.234375</td> -<td class="gauge">4</td> -</tr> - -<tr> -<td class="gauge br">5</td> -<td class="numbers">.18194</td> -<td class="numbers">.22</td> -<td class="numbers">.2070</td> -<td class="numbers">.212</td> -<td class="numbers">.204</td> -<td class="numbers">.21875</td> -<td class="gauge">5</td> -</tr> - -<tr> -<td class="gauge br">6</td> -<td class="numbers">.16202</td> -<td class="numbers">.203</td> -<td class="numbers">.1920</td> -<td class="numbers">.192</td> -<td class="numbers">.201</td> -<td class="numbers">.203125</td> -<td class="gauge">6</td> -</tr> - -<tr> -<td class="gauge br">7</td> -<td class="numbers">.14428</td> -<td class="numbers">.18</td> -<td class="numbers">.1770</td> -<td class="numbers">.176</td> -<td class="numbers">.199</td> -<td class="numbers">.1875</td> -<td class="gauge">7</td> -</tr> - -<tr> -<td class="gauge br">8</td> -<td class="numbers">.12849</td> -<td class="numbers">.165</td> -<td class="numbers">.1620</td> -<td class="numbers">.160</td> -<td class="numbers">.197</td> -<td class="numbers">.171875</td> -<td class="gauge">8</td> -</tr> - -<tr> -<td class="gauge br">9</td> -<td class="numbers">.11443</td> -<td class="numbers">.148</td> -<td class="numbers">.1483</td> -<td class="numbers">.144</td> -<td class="numbers">.194</td> -<td class="numbers">.15625</td> -<td class="gauge">9</td> -</tr> - -<tr> -<td class="gauge br">10</td> -<td class="numbers">.10189</td> -<td class="numbers">.134</td> -<td class="numbers">.1350</td> -<td class="numbers">.128</td> -<td class="numbers">.191</td> -<td class="numbers">.140625</td> -<td class="gauge">10</td> -</tr> - -<tr> -<td class="gauge br">11</td> -<td class="numbers">.090742</td> -<td class="numbers">.12</td> -<td class="numbers">.1205</td> -<td class="numbers">.116</td> -<td class="numbers">.188</td> -<td class="numbers">.125</td> -<td class="gauge">11</td> -</tr> - -<tr> -<td class="gauge br">12</td> -<td class="numbers">.080808</td> -<td class="numbers">.109</td> -<td class="numbers">.1055</td> -<td class="numbers">.104</td> -<td class="numbers">.185</td> -<td class="numbers">.109375</td> -<td class="gauge">12</td> -</tr> - -<tr> -<td class="gauge br">13</td> -<td class="numbers">.071961</td> -<td class="numbers">.095</td> -<td class="numbers">.0915</td> -<td class="numbers">.092</td> -<td class="numbers">.182</td> -<td class="numbers">.09375</td> -<td class="gauge">13</td> -</tr> - -<tr> -<td class="gauge br">14</td> -<td class="numbers">.064084</td> -<td class="numbers">.083</td> -<td class="numbers">.0800</td> -<td class="numbers">.080</td> -<td class="numbers">.180</td> -<td class="numbers">.078125</td> -<td class="gauge">14</td> -</tr> - -<tr> -<td class="gauge br">15</td> -<td class="numbers">.057068</td> -<td class="numbers">.072</td> -<td class="numbers">.0720</td> -<td class="numbers">.072</td> -<td class="numbers">.178</td> -<td class="numbers">.0703125</td> -<td class="gauge">15</td> -</tr> - -<tr> -<td class="gauge br">16</td> -<td class="numbers">.05082</td> -<td class="numbers">.065</td> -<td class="numbers">.0625</td> -<td class="numbers">.064</td> -<td class="numbers">.175</td> -<td class="numbers">.0625</td> -<td class="gauge">16</td> -</tr> - -<tr> -<td class="gauge br">17</td> -<td class="numbers">.045257</td> -<td class="numbers">.058</td> -<td class="numbers">.0540</td> -<td class="numbers">.056</td> -<td class="numbers">.172</td> -<td class="numbers">.05625</td> -<td class="gauge">17</td> -</tr> - -<tr> -<td class="gauge br">18</td> -<td class="numbers">.040303</td> -<td class="numbers">.049</td> -<td class="numbers">.0475</td> -<td class="numbers">.048</td> -<td class="numbers">.168</td> -<td class="numbers">.05</td> -<td class="gauge">18</td> -</tr> - -<tr> -<td class="gauge br">19</td> -<td class="numbers">.03589</td> -<td class="numbers">.042</td> -<td class="numbers">.0410</td> -<td class="numbers">.040</td> -<td class="numbers">.164</td> -<td class="numbers">.04375</td> -<td class="gauge">19</td> -</tr> - -<tr> -<td class="gauge br">20</td> -<td class="numbers">.031961</td> -<td class="numbers">.035</td> -<td class="numbers">.0348</td> -<td class="numbers">.036</td> -<td class="numbers">.161</td> -<td class="numbers">.0375</td> -<td class="gauge">20</td> -</tr> - -<tr> -<td class="gauge br">21</td> -<td class="numbers">.028462</td> -<td class="numbers">.032</td> -<td class="numbers">.03175</td> -<td class="numbers">.032</td> -<td class="numbers">.157</td> -<td class="numbers">.034375</td> -<td class="gauge">21</td> -</tr> - -<tr> -<td class="gauge br">22</td> -<td class="numbers">.025347</td> -<td class="numbers">.028</td> -<td class="numbers">.0286</td> -<td class="numbers">.028</td> -<td class="numbers">.155</td> -<td class="numbers">.03125</td> -<td class="gauge">22</td> -</tr> - -<tr> -<td class="gauge br">23</td> -<td class="numbers">.022571</td> -<td class="numbers">.025</td> -<td class="numbers">.0258</td> -<td class="numbers">.024</td> -<td class="numbers">.153</td> -<td class="numbers">.028125</td> -<td class="gauge">23</td> -</tr> - -<tr> -<td class="gauge br">24</td> -<td class="numbers">.0201</td> -<td class="numbers">.022</td> -<td class="numbers">.0230</td> -<td class="numbers">.022</td> -<td class="numbers">.151</td> -<td class="numbers">.025</td> -<td class="gauge">24</td> -</tr> - -<tr> -<td class="gauge br">25</td> -<td class="numbers">.0179</td> -<td class="numbers">.02</td> -<td class="numbers">.0204</td> -<td class="numbers">.020</td> -<td class="numbers">.148</td> -<td class="numbers">.021875</td> -<td class="gauge">25</td> -</tr> - -<tr> -<td class="gauge br">26</td> -<td class="numbers">.01594</td> -<td class="numbers">.018</td> -<td class="numbers">.0181</td> -<td class="numbers">.018</td> -<td class="numbers">.146</td> -<td class="numbers">.01875</td> -<td class="gauge">26</td> -</tr> - -<tr> -<td class="gauge br">27</td> -<td class="numbers">.014195</td> -<td class="numbers">.016</td> -<td class="numbers">.0173</td> -<td class="numbers">.0164</td> -<td class="numbers">.143</td> -<td class="numbers">.0171875</td> -<td class="gauge">27</td> -</tr> - -<tr> -<td class="gauge br">28</td> -<td class="numbers">.012641</td> -<td class="numbers">.014</td> -<td class="numbers">.0162</td> -<td class="numbers">.0149</td> -<td class="numbers">.139</td> -<td class="numbers">.015625</td> -<td class="gauge">28</td> -</tr> - -<tr> -<td class="gauge br">29</td> -<td class="numbers">.011257</td> -<td class="numbers">.013</td> -<td class="numbers">.0150</td> -<td class="numbers">.0136</td> -<td class="numbers">.134</td> -<td class="numbers">.0140625</td> -<td class="gauge">29</td> -</tr> - -<tr> -<td class="gauge br">30</td> -<td class="numbers">.010025</td> -<td class="numbers">.012</td> -<td class="numbers">.0140</td> -<td class="numbers">.0124</td> -<td class="numbers">.127</td> -<td class="numbers">.0125</td> -<td class="gauge">30</td> -</tr> - -<tr> -<td class="gauge br">31</td> -<td class="numbers">.008928</td> -<td class="numbers">.01</td> -<td class="numbers">.0132</td> -<td class="numbers">.0116</td> -<td class="numbers">.120</td> -<td class="numbers">.0109375</td> -<td class="gauge">31</td> -</tr> - -<tr> -<td class="gauge br">32</td> -<td class="numbers">.00795</td> -<td class="numbers">.009</td> -<td class="numbers">.0128</td> -<td class="numbers">.0108</td> -<td class="numbers">.115</td> -<td class="numbers">.01015625</td> -<td class="gauge">32</td> -</tr> - -<tr> -<td class="gauge br">33</td> -<td class="numbers">.00708</td> -<td class="numbers">.008</td> -<td class="numbers">.0118</td> -<td class="numbers">.0100</td> -<td class="numbers">.112</td> -<td class="numbers">.009375</td> -<td class="gauge">33</td> -</tr> - -<tr> -<td class="gauge br">34</td> -<td class="numbers">.006304</td> -<td class="numbers">.007</td> -<td class="numbers">.0104</td> -<td class="numbers">.0092</td> -<td class="numbers">.110</td> -<td class="numbers">.00859375</td> -<td class="gauge">34</td> -</tr> - -<tr> -<td class="gauge br">35</td> -<td class="numbers">.005614</td> -<td class="numbers">.005</td> -<td class="numbers">.0095</td> -<td class="numbers">.0084</td> -<td class="numbers">.108</td> -<td class="numbers">.0078125</td> -<td class="gauge">35</td> -</tr> - -<tr> -<td class="gauge br">36</td> -<td class="numbers">.005</td> -<td class="numbers">.004</td> -<td class="numbers">.0090</td> -<td class="numbers">.0076</td> -<td class="numbers">.106</td> -<td class="numbers">.00703125</td> -<td class="gauge">36</td> -</tr> - -<tr> -<td class="gauge br">37</td> -<td class="numbers">.004453</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="numbers">.0068</td> -<td class="numbers">.103</td> -<td class="numbers">.006640625</td> -<td class="gauge">37</td> -</tr> - -<tr> -<td class="gauge br">38</td> -<td class="numbers">.003965</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="numbers">.0060</td> -<td class="numbers">.101</td> -<td class="numbers">.00625</td> -<td class="gauge">38</td> -</tr> - -<tr> -<td class="gauge br">39</td> -<td class="numbers">.003531</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="numbers">.0052</td> -<td class="numbers">.099</td> -<td class="center br">....</td> -<td class="gauge">39</td> -</tr> - -<tr class="bb"> -<td class="gauge br">40</td> -<td class="numbers">.003144</td> -<td class="center br">....</td> -<td class="center br">....</td> -<td class="numbers">.0048</td> -<td class="numbers">.097</td> -<td class="center br">....</td> -<td class="gauge">40</td> -</tr> - -</table> - -<p><span class="pagenum" id="Page280">[280]</span></p> - -<h3 class="center">UNITED STATES STANDARD SIZES OF BOLTS.</h3> - -<table class="bolts" summary="Bolts"> - -<tr class="bt bb"> -<th colspan="2" class="bl br">DIAM-<br />ETER.</th> -<th colspan="2" class="br"><span class="smcap">Distance<br />Across<br />Flats,<br />Square<br />and<br />Hex.</span></th> -<th colspan="2" class="br"><span class="smcap">Distance<br />Across<br />Corners,<br />Hex.</span></th> -<th colspan="2" class="br"><span class="smcap">Thickness<br />of Head.</span></th> -</tr> - -<tr> -<td class="integer bl"> </td> -<td class="fraction"><sup>1</sup>⁄<sub>4</sub>″</td> -<td class="integer"> </td> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub>″</td> -<td class="integer"> </td> -<td class="fraction"><sup>9</sup>⁄<sub>16</sub>″</td> -<td class="integer"> </td> -<td class="fraction"><sup>1</sup>⁄<sub>4</sub>″</td> -</tr> - -<tr> -<td class="integer bl"> </td> -<td class="fraction"><sup>3</sup>⁄<sub>8</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>11</sup>⁄<sub>16</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>25</sup>⁄<sub>32</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>11</sup>⁄<sub>32</sub></td> -</tr> - -<tr> -<td class="integer bl"> </td> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>7</sup>⁄<sub>8</sub></td> -<td class="integer">1</td> -<td class="fraction"> </td> -<td class="integer"> </td> -<td class="fraction"><sup>7</sup>⁄<sub>16</sub></td> -</tr> - -<tr> -<td class="integer bl"> </td> -<td class="fraction"><sup>5</sup>⁄<sub>8</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>1</sup>⁄<sub>16</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>7</sup>⁄<sub>32</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>17</sup>⁄<sub>32</sub></td> -</tr> - -<tr> -<td class="integer bl"> </td> -<td class="fraction"><sup>3</sup>⁄<sub>4</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>1</sup>⁄<sub>4</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>7</sup>⁄<sub>16</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>5</sup>⁄<sub>8</sub></td> -</tr> - -<tr> -<td class="integer bl"> </td> -<td class="fraction"><sup>7</sup>⁄<sub>8</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>7</sup>⁄<sub>16</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>21</sup>⁄<sub>32</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>21</sup>⁄<sub>32</sub></td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"> </td> -<td class="integer">1</td> -<td class="fraction"><sup>5</sup>⁄<sub>8</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>7</sup>⁄<sub>8</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>13</sup>⁄<sub>16</sub></td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"><sup>1</sup>⁄<sub>8</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>13</sup>⁄<sub>16</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>3</sup>⁄<sub>32</sub></td> -<td class="integer"> </td> -<td class="fraction"><sup>29</sup>⁄<sub>32</sub></td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"><sup>1</sup>⁄<sub>4</sub></td> -<td class="integer">2</td> -<td class="fraction"> </td> -<td class="integer">2</td> -<td class="fraction"><sup>5</sup>⁄<sub>16</sub></td> -<td class="integer">1</td> -<td class="fraction"> </td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"><sup>3</sup>⁄<sub>8</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>3</sup>⁄<sub>16</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>3</sup>⁄<sub>32</sub></td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>3</sup>⁄<sub>8</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>3</sup>⁄<sub>4</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>3</sup>⁄<sub>16</sub></td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"><sup>5</sup>⁄<sub>8</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>9</sup>⁄<sub>16</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>15</sup>⁄<sub>16</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>9</sup>⁄<sub>32</sub></td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"><sup>3</sup>⁄<sub>4</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>3</sup>⁄<sub>4</sub></td> -<td class="integer">3</td> -<td class="fraction"><sup>3</sup>⁄<sub>16</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>3</sup>⁄<sub>8</sub></td> -</tr> - -<tr> -<td class="integer bl">1</td> -<td class="fraction"><sup>7</sup>⁄<sub>8</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>15</sup>⁄<sub>16</sub></td> -<td class="integer">3</td> -<td class="fraction"><sup>13</sup>⁄<sub>32</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>15</sup>⁄<sub>32</sub></td> -</tr> - -<tr> -<td class="integer bl">2</td> -<td class="fraction"> </td> -<td class="integer">3</td> -<td class="fraction"><sup>1</sup>⁄<sub>8</sub></td> -<td class="integer">3</td> -<td class="fraction"><sup>5</sup>⁄<sub>8</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>9</sup>⁄<sub>16</sub></td> -</tr> - -<tr> -<td class="integer bl">2</td> -<td class="fraction"><sup>1</sup>⁄<sub>4</sub></td> -<td class="integer">3</td> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub></td> -<td class="integer">4</td> -<td class="fraction"><sup>1</sup>⁄<sub>16</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>3</sup>⁄<sub>4</sub></td> -</tr> - -<tr> -<td class="integer bl">2</td> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub></td> -<td class="integer">3</td> -<td class="fraction"><sup>7</sup>⁄<sub>8</sub></td> -<td class="integer">4</td> -<td class="fraction"><sup>1</sup>⁄<sub>2</sub></td> -<td class="integer">1</td> -<td class="fraction"><sup>15</sup>⁄<sub>16</sub></td> -</tr> - -<tr> -<td class="integer bl">2</td> -<td class="fraction"><sup>3</sup>⁄<sub>4</sub></td> -<td class="integer">4</td> -<td class="fraction"><sup>1</sup>⁄<sub>4</sub></td> -<td class="integer">4</td> -<td class="fraction"><sup>7</sup>⁄<sub>8</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>1</sup>⁄<sub>8</sub></td> -</tr> - -<tr class="bb"> -<td class="integer bl">3</td> -<td class="fraction"> </td> -<td class="integer">4</td> -<td class="fraction"><sup>5</sup>⁄<sub>8</sub></td> -<td class="integer">5</td> -<td class="fraction"><sup>11</sup>⁄<sub>32</sub></td> -<td class="integer">2</td> -<td class="fraction"><sup>5</sup>⁄<sub>16</sub></td> -</tr> - -</table> - - -<h3 class="center">UNITED STATES STANDARD SCREW -THREAD GAUGE.</h3> - -<div class="container w30em" id="Fig316"> -<img src="images/illo280.jpg" alt="Gauge" /> -<p class="caption">Fig. 316.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page281">[281]</span></p> - -<h2 class="nobreak">Some Things Personal.</h2> - -</div><!--chapter--> - -<p>In the preparation of this work the idea of self-help has never been forgotten; -nothing has been held back or omitted which would, in the author’s opinion, tend -to advance the student in the draughtsman’s art.</p> - -<p>The volume contains the experience in practical drawing, as related to engineering -and mechanics, of over one hundred years, i. e., the author’s, Mr. Perrott’s and Mr. Lucas’ -experiences added together exceed that period.</p> - -<p>Hence, the work should be really helpful; it has been aimed also to be entertaining -and with easy tasks; all the illustrations of the book are recommended as -models for practice—they have been selected with that view.</p> - -<p>Moreover, as between author and publishers, the latter have agreed to issue the -work in the most thorough style possible—as to paper, printing and binding—and to -sell it at a very generously low price, considering all things.</p> - -<p>With the closing words “hail and farewell,” the author bids adieu (God be with -you) to the reader and the student.</p> - -<hr class="chap x-ebookmaker-drop" /> - -<p><span class="pagenum" id="Page282">[282]</span></p> - -<div class="container w30em"> -<img src="images/illo282.jpg" alt="" /> -<p class="caption">BEACON LIGHT.</p> -</div> - -<hr class="chap x-ebookmaker-drop" /> - -<div class="chapter"> - -<p><span class="pagenum" id="Page283">[283]</span></p> - -<h2 class="nobreak">Hawkins’ <span class="horsplit"><span class="top noline">Self</span><span class="bot">Help</span></span> -Mechanical Drawing.<br /> -<span class="high">Index.</span></h2> - -</div><!--chapter--> - -<ul class="index"> - -<li><span class="righttext fsize70">PAGE</span></li> - -<li><b>Acute Angle</b>, def. <span class="righttext"><a href="#Page42">42</a></span></li> - -<li><b>Acute-Angled Triangle</b>, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li><b>Addendum Circle</b>, illus. <span class="righttext"><a href="#Page200">200</a></span></li> - -<li><b>Alphabets</b>, Gothic, desc. <span class="righttext"><a href="#Page171">171</a></span></li> - -<li><b>Altitude</b>, def. <span class="righttext"><a href="#Page41">41</a></span></li> - -<li><b>Altitude of a Polygon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>American Machinist</b>, Quotation from <span class="righttext"><a href="#Page141">141</a></span></li> - -<li><b>Angle</b>, def. <span class="righttext"><a href="#Page41">41</a>, <a href="#Page83">83</a></span></li> -<li class="level1">To bisect an <span class="righttext"><a href="#Page89">89</a></span></li> -<li class="level1">To draw an <span class="righttext"><a href="#Page89">89</a></span></li> - -<li><b>Angle-Iron</b>, illus. <span class="righttext"><a href="#Page75">75</a></span></li> - -<li><b>Angle-Plate</b>, illus. <span class="righttext"><a href="#Page75">75</a></span></li> - -<li><b>Angular Perspective Drawing</b>, illus. <span class="righttext"><a href="#Page260">260</a>, -<a href="#Page265">265</a></span></li> - -<li><b>Apex</b>, def. <span class="righttext"><a href="#Page42">42</a></span></li> - -<li><b>Apex of an Angle</b>, def. <span class="righttext"><a href="#Page42">42</a></span></li> - -<li><b>Arc</b>, def. <span class="righttext"><a href="#Page42">42</a></span></li> -<li class="level1">Complement of an <span class="righttext"><a href="#Page99">99</a></span></li> -<li class="level1">Cosecant of an <span class="righttext"><a href="#Page99">99</a></span></li> -<li class="level1">Cotangent of an <span class="righttext"><a href="#Page99">99</a></span></li> -<li class="level1">Sine of an <span class="righttext"><a href="#Page99">99</a></span></li> -<li class="level1">Supplement of an <span class="righttext"><a href="#Page99">99</a></span></li> -<li class="level1">Tangent of an <span class="righttext"><a href="#Page99">99</a></span></li> -<li class="level1">Versed Sine of an <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Arc of Circle</b>, To find the center of an <span class="righttext"><a href="#Page90">90</a></span></li> - -<li><b>Arcs</b>, Drawing<span class="pagenum" id="Page284">[284]</span> -<span class="righttext"><a href="#Page146">146</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page146">146</a></span></li> - -<li><b>Arrow-Heads</b>, how made <span class="righttext"><a href="#Page172">172</a>, <a href="#Page176">176</a></span></li> - -<li><b>Axiom</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Axis</b>, Conjugate, def. <span class="righttext"><a href="#Page96">96</a></span></li> -<li class="level1">Of a Figure, def. <span class="righttext"><a href="#Page43">43</a></span></li> -<li class="level1">Of a Solid, def. <span class="righttext"><a href="#Page42">42</a></span></li> -<li class="level1">Transverse, def. <span class="righttext"><a href="#Page96">96</a></span></li> - -<li class="startletter"><b>Backlash in Gearing</b> <span class="righttext"><a href="#Page215">215</a></span></li> - -<li><b>Backward Projection</b> <span class="righttext">desc. <a href="#Page152">152</a>, illus. -<a href="#Page152">152-3</a></span></li> - -<li><b>Base</b>, def. <span class="righttext"><a href="#Page43">43</a></span></li> -<li class="level1">Of a Polygon, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Beacon Light</b>, illus. <span class="righttext"><a href="#Page282">282</a></span></li> - -<li><b>Beam Compasses</b> <span class="righttext">desc. <a href="#Page124">124</a>, illus. -<a href="#Page124">124</a></span></li> - -<li><b>Bending Machine</b>, Hydraulic <span class="righttext">desc. <a href="#Page221">221</a>, illus. -<a href="#Page220">220-1</a></span></li> - -<li><b>Benjamin, Prof. Chas.</b>, “How and What to Study” <span class="righttext"><a href="#Page23">23</a></span></li> - -<li><b>Bevel-Gear</b>, desc. <span class="righttext"><a href="#Page201">201</a></span></li> - -<li><b>Bevel Mortise Wheel</b>, desc. <span class="righttext"><a href="#Page203">203</a></span></li> - -<li><b>Bevel Wheel</b> <span class="righttext">desc. <a href="#Page199">199</a>, illus. -<a href="#Page203">203</a></span></li> - -<li><b>Bisect</b>, def. <span class="righttext"><a href="#Page43">43</a></span></li> - -<li><b>Bisector</b>, def. <span class="righttext"><a href="#Page43">43</a></span></li> - -<li><b>Blackboard</b>, illus. and desc. <span class="righttext"><a href="#Page27">27</a></span></li> - -<li><b>Blackboard Drawing</b> <span class="righttext"><a href="#Page28">28</a></span></li> - -<li><b>Blue Printing</b> <span class="righttext">desc. <a href="#Page186">186</a>, illus. -<a href="#Page187">187</a></span></li> -<li class="level1">Test pieces <span class="righttext"><a href="#Page188">188</a></span></li> - -<li><b>Blue Prints</b>, Office rules for <span class="righttext"><a href="#Page196">196</a></span></li> - -<li><b>Black Process Copying</b> <span class="righttext"><a href="#Page188">188</a></span></li> - -<li><b>Boiler-Plate</b>, Riveted, illus. <span class="righttext"><a href="#Page76">76</a></span></li> - -<li><b>Bolt</b>, Square-head, illus. <span class="righttext"><a href="#Page76">76</a></span></li> - -<li><b>Bolt and Nut</b>, Square-head <span class="righttext">desc. <a href="#Page144">144</a>, illus. -<a href="#Page145">145</a></span></li> -<li class="level1">Hexagon <span class="righttext">desc. <a href="#Page144">144</a>, illus. <a href="#Page76">76</a>, -<a href="#Page144">144</a></span></li> - -<li><b>Bow-Dividers</b> <span class="righttext">desc. <a href="#Page123">123</a>, illus. <a href="#Page122">122</a></span></li> - -<li><b>Bow-Pencil</b>, desc. <span class="righttext"><a href="#Page123">123</a></span></li> - -<li><b>Bows</b>, Use of <span class="righttext"><a href="#Page242">242</a></span></li> - -<li><b>Brick</b>, Section Lining, illus. <span class="righttext"><a href="#Page182">182</a></span></li> - -<li><b>Broken Lines</b>, How to Draw <span class="righttext"><a href="#Page33">33</a></span></li> -<li class="level1">Def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Bumping Post</b>, illus. <span class="righttext"><a href="#Page226">226</a></span></li> - -<li class="startletter"><b>Calipers</b>, illus. <span class="righttext"><a href="#Pagevi">vi</a></span></li> - -<li><b>Cast-Iron</b>, Section-Lining, illus. <span class="righttext"><a href="#Page182">182</a></span></li> - -<li><b>Caulking Tool</b>, illus.<span class="pagenum" id="Page285">[285]</span> -<span class="righttext"><a href="#Page76">76</a></span></li> - -<li><b>Center Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Center Lines</b>, In Drawings <span class="righttext"><a href="#Page240">240-1</a></span></li> -<li class="level1">In Shop Drawings <span class="righttext"><a href="#Page192">192</a></span></li> - -<li><b>Chalk-Crayon</b> <span class="righttext">desc. <a href="#Page27">27</a>, illus. <a href="#Page27">27</a>, -<a href="#Page37">37</a></span></li> - -<li><b>Chalk-Work</b> <span class="righttext"><a href="#Page27">27</a></span></li> -<li class="level1">Instruments for Drawing, illus. <span class="righttext"><a href="#Page29">29</a></span></li> - -<li><b>Channel-Iron</b>, illus. <span class="righttext"><a href="#Page75">75</a></span></li> - -<li><b>Checking Drawings</b> <span class="righttext"><a href="#Page194">194</a></span></li> - -<li><b>Circle</b>, def. <span class="righttext"><a href="#Page43">43</a></span></li> -<li class="level1">To describe about a square <span class="righttext"><a href="#Page93">93</a></span></li> -<li class="level2">about a triangle <span class="righttext"><a href="#Page93">93</a></span></li> -<li class="level2">through two points <span class="righttext"><a href="#Page90">90</a></span></li> -<li class="level2">through three points <span class="righttext"><a href="#Page90">90</a></span></li> -<li class="level1">To find the center <span class="righttext"><a href="#Page90">90</a></span></li> -<li class="level1">To inscribe in a square <span class="righttext"><a href="#Page94">94</a></span></li> -<li class="level2">in a triangle <span class="righttext"><a href="#Page94">94</a></span></li> - -<li><b>Circles</b>, Drawing <span class="righttext">desc. <a href="#Page146">146</a>, illus. -<a href="#Page146">146</a></span></li> - -<li><b>Circumference of a Circle</b> <span class="righttext"><a href="#Page43">43</a></span></li> - -<li><b>Circumscribe</b>, def. <span class="righttext"><a href="#Page43">43</a></span></li> - -<li><b>Circular Pitch Line</b>, illus. <span class="righttext"><a href="#Page200">200</a></span></li> - -<li><b>Classifying Drawings</b>, Office Rules for <span class="righttext"><a href="#Page191">191</a></span></li> - -<li><b>Clearance in Wheel Teeth</b> <span class="righttext"><a href="#Page215">215</a></span></li> - -<li><b>Cog-Wheel</b> <span class="righttext">def. <a href="#Page201">201</a>, illus. <a href="#Page201">201</a></span></li> -<li class="level1">Section Lining, illus. <span class="righttext"><a href="#Page183">183</a></span></li> - -<li><b>Coin</b>, Perspective View of a, illus. <span class="righttext"><a href="#Page248">248</a></span></li> - -<li><b>Color and Tints</b> <span class="righttext"><a href="#Page185">185</a></span></li> - -<li><b>Compass</b>, Mariners’, illus. <span class="righttext"><a href="#Page268">268</a></span></li> - -<li><b>Compasses</b>, Beam, desc. and illus. <span class="righttext"><a href="#Page124">124</a></span></li> -<li class="level1">Desc. and illus. <span class="righttext"><a href="#Page121">121</a></span></li> -<li class="level1">For holding chalk, illus. <span class="righttext"><a href="#Page29">29</a></span></li> -<li class="level1">How to hold, illus. <span class="righttext"><a href="#Page136">136</a></span></li> - -<li><b>Complement of an Arc</b> <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Composition</b>, Section-Lining, illus. <span class="righttext"><a href="#Page182">182</a></span></li> - -<li><b>Concave</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Cone</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Conjugate Axis</b>, def. <span class="righttext"><a href="#Page96">96</a></span></li> - -<li><b>Construction</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> -<li class="level1">Line, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Contents</b>, Table of <span class="righttext"><a href="#Page24">24</a></span></li> - -<li><b>Contour</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Convergence</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Convex</b>, def.<span class="pagenum" id="Page286">[286]</span> -<span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Copying Drawings</b>, Black Process <span class="righttext"><a href="#Page188">188</a></span></li> -<li class="level1">Blue Printing <span class="righttext"><a href="#Page186">186</a></span></li> -<li class="level1">Tracing <span class="righttext"><a href="#Page184">184</a></span></li> - -<li><b>Copyright</b> <span class="righttext"><a href="#Pageviii">viii</a></span></li> - -<li><b>Corner</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Corollary</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Co-secant of an Arc</b>, def. <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Co-sine of an Arc</b>, def. <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Co-tangent of an Arc</b>, def. <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Crane</b>, desc. <span class="righttext"><a href="#Page219">219</a></span></li> -<li class="level1">Working drawing of, illus. <span class="righttext"><a href="#Page218">218</a></span></li> - -<li><b>Cross-Hatches</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Cross-hatching Drawings</b> <span class="righttext"><a href="#Page182">182</a></span></li> - -<li><b>Crown Wheel</b>, illus. <span class="righttext"><a href="#Page208">208</a></span></li> - -<li><b>Curve</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Curved Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Curved Lines</b>, Drawing, desc. <span class="righttext"><a href="#Page69">69</a></span></li> -<li class="level1">Drawing Figures of <span class="righttext"><a href="#Page70">70</a>, <a href="#Page72">72</a>, -<a href="#Page73">73</a></span></li> -<li class="level1">How to Draw <span class="righttext"><a href="#Page35">35</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page70">70</a></span></li> - -<li><b>Curved Surface</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Curve or Scroll</b>, illus. <span class="righttext"><a href="#Page117">117</a></span></li> - -<li><b>Cut Gears</b>, desc. <span class="righttext"><a href="#Page215">215</a></span></li> - -<li><b>Cylinder</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Cylindrical</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Cylindrical Projection</b>, illus. <span class="righttext"><a href="#Page161">161</a></span></li> - -<li class="startletter"><b>Dash Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Decimal Equivalents</b>, Table of <span class="righttext"><a href="#Page269">269</a></span></li> - -<li><b>Dedication</b> <span class="righttext"><a href="#Pageix">ix</a></span></li> - -<li><b>Definitions</b>, Preliminary <span class="righttext"><a href="#Page41">41</a></span></li> - -<li><b>Degree</b>, def. <span class="righttext"><a href="#Page41">41</a>, <a href="#Page44">44</a></span></li> - -<li><b>Describe</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Design</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> -<li class="level1">Symmetry in, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li><b>Designing Gears</b> <span class="righttext"><a href="#Page209">209</a></span></li> - -<li><b>Detail Drawings</b>, Office Rules for <span class="righttext"><a href="#Page191">191</a></span></li> - -<li><b>Develop</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Diagonal</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Diagonals of a Polygon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Diameter</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Diameter</b>, Of a Circle<span class="pagenum" id="Page287">[287]</span> -<span class="righttext"><a href="#Page43">43</a></span></li> - -<li><b>Diameters of Wheels</b>, How to Measure <span class="righttext"><a href="#Page199">199</a></span></li> - -<li><b>Diametral Pitch</b>, desc. <span class="righttext"><a href="#Page200">200</a></span></li> -<li class="level1">Of Gears <span class="righttext"><a href="#Page212">212</a></span></li> - -<li><b>Dimensioning Drawings</b> <span class="righttext">desc. <a href="#Page176">176</a>, illus. -<a href="#Page177">177</a>, <a href="#Page179">179</a></span></li> - -<li><b>Dimension Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Dimensions on Drawings</b>, Office Rules for <span class="righttext"><a href="#Page192">192</a></span></li> - -<li><b>Dividers and Compasses</b>, desc. <span class="righttext"><a href="#Page119">119</a></span></li> - -<li><b>Dividers</b>, illus. <span class="righttext"><a href="#Page82">82</a>, <a href="#Page119">119</a></span></li> -<li class="level1">Bisecting, desc. <span class="righttext"><a href="#Page119">119</a></span></li> -<li class="level1">Bow, illus. <span class="righttext"><a href="#Page122">122</a></span></li> -<li class="level1">“Point” <span class="righttext"><a href="#Page242">242</a></span></li> -<li class="level1">Proportional <span class="righttext">desc. <a href="#Page119">119</a>, illus. -<a href="#Page120">120</a></span></li> -<li class="level1">Spring Bow, desc. <span class="righttext"><a href="#Page124">124</a></span></li> - -<li><b>Dodecahedron</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Dot-and-Dash Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Dotted Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Draughtsmen</b>, Useful Tables for -<span class="righttext"><a href="#Page269">269</a>-<a href="#Page280">280</a></span></li> - -<li><b>Drawing</b>, Blackboard <span class="righttext"><a href="#Page28">28</a></span></li> -<li class="level1">Free hand <span class="righttext"><a href="#Page55">55</a></span></li> -<li class="level1">Linear Perspective <span class="righttext"><a href="#Page247">247</a></span></li> -<li class="level1">Parallel Perspective <span class="righttext"><a href="#Page260">260-1</a></span></li> -<li class="level1">Projection, desc. <span class="righttext"><a href="#Page148">148</a></span></li> -<li class="level1">Scale Perspective <span class="righttext"><a href="#Page257">257</a></span></li> -<li class="level1">Spur Gear, illus. <span class="righttext"><a href="#Page163">163</a>, -<a href="#Page211">211</a></span></li> -<li class="level1">Spur Wheel, desc. <span class="righttext"><a href="#Page162">162</a></span></li> -<li class="level1">Straight Line Figures <span class="righttext">desc. <a href="#Page65">65</a>, illus. -<a href="#Page66">66-7-8</a></span></li> -<li class="level1">Symbols <span class="righttext"><a href="#Page193">193</a></span></li> -<li class="level1">The Pitch Line <span class="righttext"><a href="#Page209">209</a></span></li> -<li class="level1">To Scale, desc. <span class="righttext"><a href="#Page126">126</a></span></li> -<li class="level1">Working, def. <span class="righttext"><a href="#Page51">51</a></span></li> - -<li><b>Drawing-Board</b> <span class="righttext">desc. <a href="#Page107">107</a>, illus. <a href="#Page102">102</a>, -<a href="#Page106">106</a>, <a href="#Page108">108</a></span></li> -<li class="level1">Expansion and Contraction of <span class="righttext"><a href="#Page108">108</a></span></li> -<li class="level1">How to Construct <span class="righttext"><a href="#Page107">107</a></span></li> -<li class="level1">Trestles, illus. <span class="righttext"><a href="#Page110">110</a>, -<a href="#Page111">111</a></span></li> - -<li><b>Drawing Instruments</b>, desc. <span class="righttext"><a href="#Page103">103</a></span></li> -<li class="level1">How to Select <span class="righttext"><a href="#Page104">104</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page105">105</a></span></li> -<li class="level1">Outfit Recommended <span class="righttext"><a href="#Page104">104</a></span></li> - -<li><b>Drawing Materials</b>, desc. <span class="righttext"><a href="#Page103">103</a></span></li> - -<li><b>Drawing Office Rules</b> <span class="righttext"><a href="#Page191">191</a></span></li> - -<li><b>Drawing Paper</b>, desc. <span class="righttext"><a href="#Page132">132</a></span></li> -<li class="level1">Erasing lines<span class="pagenum" id="Page288">[288]</span> -<span class="righttext"><a href="#Page140">140</a></span></li> -<li class="level1">Fixing of, illus. <span class="righttext"><a href="#Page102">102</a></span></li> -<li class="level1">Fixing on the Board <span class="righttext"><a href="#Page139">139</a></span></li> -<li class="level1">Pasting <span class="righttext"><a href="#Page184">184</a></span></li> -<li class="level1">“Points” <span class="righttext"><a href="#Page243">243</a></span></li> -<li class="level1">Patent Office Sizes <span class="righttext"><a href="#Page234">234</a></span></li> -<li class="level1">Sizes of <span class="righttext"><a href="#Page133">133</a></span></li> - -<li><b>Drawing Pencils</b>, desc. and illus. <span class="righttext"><a href="#Page118">118</a></span></li> -<li class="level1">How to Use <span class="righttext"><a href="#Page56">56</a></span></li> - -<li><b>Drawing Pen</b>, Filling with ink, illus. <span class="righttext"><a href="#Page130">130</a></span></li> - -<li><b>Drawing Pens</b>, desc. and illus. <span class="righttext"><a href="#Page129">129</a></span></li> - -<li><b>Drawing-Pins</b>, desc. <span class="righttext"><a href="#Page110">110</a></span></li> - -<li><b>Drawing Scales</b>, desc. <span class="righttext"><a href="#Page126">126</a></span></li> - -<li><b>Drawings</b>, Cleaning, desc. <span class="righttext"><a href="#Page169">169</a></span></li> -<li class="level1">Color and Finish, note <span class="righttext"><a href="#Page185">185</a></span></li> -<li class="level1">Dimensioning, desc. <span class="righttext"><a href="#Page176">176</a></span></li> -<li class="level1">Inking in, desc. <span class="righttext"><a href="#Page167">167</a></span></li> -<li class="level1">Lettering, desc. <span class="righttext"><a href="#Page171">171</a></span></li> -<li class="level1">Patent Office Rules for <span class="righttext"><a href="#Page233">233</a></span></li> -<li class="level1">Reproducing <span class="righttext"><a href="#Page186">186</a></span></li> -<li class="level1">Section-Lining, desc. <span class="righttext"><a href="#Page182">182</a></span></li> -<li class="level1">Shading <span class="righttext">desc. <a href="#Page180">180</a>, illus. <a href="#Page180">180</a>, -<a href="#Page225">225</a></span></li> -<li class="level1">Size of, Office Rules <span class="righttext"><a href="#Page191">191</a></span></li> -<li class="level1">Tint and Color, desc. <span class="righttext"><a href="#Page184">184</a></span></li> - -<li><b>Drawing-Table</b>, desc. <span class="righttext"><a href="#Page111">111</a></span></li> -<li class="level1">Folding Legs, illus. <span class="righttext"><a href="#Page104">104</a></span></li> - -<li class="startletter"><b>Edge</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Elevation</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Elevation and Section</b>, Spur Wheel <span class="righttext">desc. <a href="#Page216">216</a>, illus. -<a href="#Page212">212</a></span></li> - -<li><b>Ellipse, An</b>, desc. <span class="righttext"><a href="#Page96">96</a>, <a href="#Page118">118</a></span></li> -<li class="level1">To describe when length and breadth are given <span class="righttext"><a href="#Page96">96</a></span></li> - -<li><b>Envelopes</b>, Portfolio, desc. <span class="righttext"><a href="#Page142">142</a></span></li> - -<li><b>Equiangular Triangle</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Equilateral Triangle</b>, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li><b>Erasing</b>, “Points” on <span class="righttext"><a href="#Page242">242</a></span></li> - -<li><b>Eye</b>, illus. and desc. <span class="righttext"><a href="#Page253">253</a></span></li> -<li class="level1">Effect of Light on <span class="righttext"><a href="#Page253">253</a></span></li> - -<li class="startletter"><b>Face</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Faced Surfaces</b>, Points, etc. <span class="righttext"><a href="#Page242">242</a></span></li> - -<li><b>Figures</b>, Drawing Straight-line <span class="righttext"><a href="#Page65">65</a></span></li> -<li class="level1">Numerals, examples of<span class="pagenum" id="Page289">[289]</span> -<span class="righttext"><a href="#Page173">173</a></span></li> -<li class="level1">Straight-line, illus. <span class="righttext"><a href="#Page66">66</a></span></li> - -<li><b>File Handle</b>, desc. and illus. <span class="righttext"><a href="#Page144">144</a></span></li> - -<li><b>Finger and Thumb Lines</b>, illus. <span class="righttext"><a href="#Page64">64</a></span></li> - -<li><b>Finished Surfaces</b>, How to indicate <span class="righttext"><a href="#Page193">193</a></span></li> -<li class="level1">“Points” <span class="righttext"><a href="#Page242">242</a></span></li> - -<li><b>Finishing</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Flanged-tooth Wheel</b>, desc. <span class="righttext"><a href="#Page205">205</a></span></li> - -<li><b>Flat Pattern</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Foreshortening</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Forward Projection</b> <span class="righttext">desc. <a href="#Page151">151</a>, <a href="#Page152">152</a>, -illus. <a href="#Page155">155</a></span></li> - -<li><b>Free-hand</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Free-hand Drawing</b> <span class="righttext"><a href="#Page55">55</a>, <a href="#Page78">78</a></span></li> -<li class="level1">First Lesson in <span class="righttext"><a href="#Page30">30</a></span></li> -<li class="level1">Penciling, illus. <span class="righttext"><a href="#Page54">54</a></span></li> - -<li><b>Free-hand Illustration</b>, a Water Wheel <span class="righttext"><a href="#Page78">78</a></span></li> - -<li><b>Friction-Clutch and Pulley</b>, desc. <span class="righttext"><a href="#Page224">224</a></span></li> - -<li><b>Friction Gear-Wheels</b>, desc. <span class="righttext"><a href="#Page201">201</a></span></li> - -<li><b>Full Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li class="startletter"><b>Gear</b>, def. <span class="righttext"><a href="#Page199">199</a></span></li> - -<li><b>Gearing</b>, desc. <span class="righttext"><a href="#Page199">199</a></span></li> -<li class="level1">Drawing <span class="righttext">desc. <a href="#Page162">162</a>, illus. -<a href="#Page163">163</a></span></li> - -<li><b>Gearing and Design</b> <span class="righttext"><a href="#Page197">197</a></span></li> - -<li><b>Gears</b>, A Train of, desc. <span class="righttext"><a href="#Page208">208</a></span></li> -<li class="level1">Speed of <span class="righttext"><a href="#Page208">208</a></span></li> - -<li><b>Gear-Wheels</b>, Spur, illus. <span class="righttext"><a href="#Page198">198</a></span></li> - -<li><b>Generated</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Geometric</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Geometrical Axioms</b> <span class="righttext"><a href="#Page84">84</a></span></li> - -<li><b>Geometrical Drawing</b>, desc. <span class="righttext"><a href="#Page81">81</a></span></li> -<li class="level1">Problems in <span class="righttext"><a href="#Page86">86</a></span></li> - -<li><b>Geometrical Signs</b> <span class="righttext"><a href="#Page84">84</a></span></li> - -<li><b>Geometry</b>, defs. <span class="righttext"><a href="#Page249">249</a></span></li> -<li class="level1">Elements of <span class="righttext"><a href="#Page81">81</a></span></li> - -<li><b>Gothic Letters</b>, illus. <span class="righttext"><a href="#Page173">173</a></span></li> - -<li><b>Grooved Friction Wheels</b>, desc. <span class="righttext"><a href="#Page201">201</a></span></li> - -<li><b>Ground-Plane</b> <span class="righttext">def. <a href="#Page249">249</a>, <a href="#Page255">255</a>, illus. -<a href="#Page249">249</a></span></li> - -<li class="startletter"><b>Half-Tint</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Hand-Wheel</b>, illus. <span class="righttext"><a href="#Page77">77</a></span></li> - -<li><b>Hanger</b>, illus.<span class="pagenum" id="Page290">[290]</span> -<span class="righttext"><a href="#Page179">179</a></span></li> - -<li><b>Helical Wheel</b> <span class="righttext">desc. <a href="#Page199">199</a>, illus. -<a href="#Page207">207</a></span></li> - -<li><b>Hemisphere</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Heptagon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Hexagon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> -<li class="level1">To Construct a <span class="righttext"><a href="#Page95">95</a></span></li> - -<li><b>Hexagon-Head Bolt</b>, illus. <span class="righttext"><a href="#Page144">144</a></span></li> - -<li><b>Hexahedron</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Horizontal</b>, def. <span class="righttext"><a href="#Page45">45</a>, <a href="#Page250">250</a></span></li> - -<li><b>Horizontal Line</b>, in Drawing, illus. <span class="righttext"><a href="#Page250">250</a></span></li> -<li class="level1">How to Draw <span class="righttext"><a href="#Page32">32</a></span></li> -<li class="level1">In Perspective <span class="righttext"><a href="#Page252">252</a></span></li> - -<li><b>Hypothesis</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li class="startletter"><b>Icosahedron</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>India Ink</b>, desc. and illus. <span class="righttext"><a href="#Page131">131</a></span></li> -<li class="level1">Dish or Tile, illus. <span class="righttext"><a href="#Page131">131</a></span></li> - -<li><b>India Rubber Eraser</b>, illus. <span class="righttext"><a href="#Page132">132</a></span></li> -<li class="level1">Use of <span class="righttext"><a href="#Page240">240</a></span></li> - -<li><b>Ink</b>, Preparing, for Drawings, desc. <span class="righttext"><a href="#Page167">167</a></span></li> -<li class="level1">Test for Good, desc. <span class="righttext"><a href="#Page167">167</a></span></li> - -<li><b>Ink Eraser</b>, Steel, desc. and illus. <span class="righttext"><a href="#Page132">132</a></span></li> - -<li><b>Inking</b>, illus. <span class="righttext"><a href="#Page166">166</a>, <a href="#Page169">169</a></span></li> -<li class="level1">Long Lines, illus. <span class="righttext"><a href="#Page170">170</a></span></li> -<li class="level1">Rules of Procedure <span class="righttext"><a href="#Page168">168</a></span></li> -<li class="level1">Short Work, illus. <span class="righttext"><a href="#Page169">169</a></span></li> - -<li>“<b>Inking in</b>” Drawings, desc. <span class="righttext"><a href="#Page167">167</a></span></li> -<li class="level1">“Points,” etc. <span class="righttext"><a href="#Page239">239</a>, <a href="#Page243">243</a></span></li> -<li class="level1">Patent Office Drawings <span class="righttext"><a href="#Page234">234</a></span></li> - -<li><b>Inscribe</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Instrumental</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> - -<li><b>Instruments</b> for Chalk-work, illus. <span class="righttext"><a href="#Page29">29</a></span></li> - -<li><b>Internal Gear</b>, desc. <span class="righttext"><a href="#Page201">201</a></span></li> - -<li><b>Internal-Gear Wheel</b>, illus. <span class="righttext"><a href="#Page207">207</a></span></li> - -<li><b>Introduction</b> <span class="righttext"><a href="#Page15">15</a></span></li> - -<li><b>Isosceles Triangle</b>, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li class="startletter"><b>Lantern-Wheel</b>, desc. <span class="righttext"><a href="#Page201">201</a></span></li> - -<li><b>Lathe-Dog</b>, illus. <span class="righttext"><a href="#Page76">76</a></span></li> - -<li><b>Lemma</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Lettering</b>, Blow-Off Valve, illus. <span class="righttext"><a href="#Page175">175</a></span></li> -<li class="level1">Drawings, desc. <span class="righttext"><a href="#Page171">171</a></span></li> - -<li><b>Light</b>, and Sense of Seeing<span class="pagenum" id="Page291">[291]</span> -<span class="righttext"><a href="#Page254">254</a></span></li> -<li class="level1">Experiment with, illus. <span class="righttext"><a href="#Page255">255</a></span></li> -<li class="level1">Laws of <span class="righttext"><a href="#Page252">252</a></span></li> - -<li><b>Line</b>, def. <span class="righttext"><a href="#Page82">82</a></span></li> -<li class="level1">To Divide into Equal Parts <span class="righttext"><a href="#Page89">89</a></span></li> - -<li><b>Linear Perspective Drawing</b> <span class="righttext"><a href="#Page247">247</a></span></li> - -<li><b>Lines</b>, def. <span class="righttext"><a href="#Page45">45</a></span></li> -<li class="level1">Note <span class="righttext"><a href="#Page65">65</a></span></li> -<li class="level1">Parallel, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Link Motion</b>, Stephenson’s, illus. <span class="righttext"><a href="#Page225">225</a></span></li> - -<li><b>Longitudinal</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Lucas, Theo.</b>, Acknowledgement <span class="righttext"><a href="#Page23">23</a>, -<a href="#Page266">266</a></span></li> - -<li class="startletter"><b>Marking Measurements</b> on Drawings -<span class="righttext"><a href="#Page243">243</a></span></li> - -<li><b>Mechanical Drawing</b> <span class="righttext"><a href="#Page137">137</a>, <a href="#Page247">247</a></span></li> -<li class="level1">Elevation <span class="righttext"><a href="#Page138">138</a></span></li> -<li class="level1">Examples <span class="righttext"><a href="#Page143">143</a></span></li> -<li class="level1">Procedure <span class="righttext"><a href="#Page141">141</a></span></li> - -<li><b>Minerva</b>, Free-hand Sketch of <span class="righttext"><a href="#Pageiii">iii</a></span></li> - -<li><b>Miter-Wheel</b> <span class="righttext">desc. <a href="#Page199">199</a>, <a href="#Page204">204</a>, illus. -<a href="#Page204">204</a></span></li> - -<li><b>Model</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li class="startletter"><b>Nonagon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Numbering</b> Drawings, Office Rules for <span class="righttext"><a href="#Page194">194-5</a></span></li> - -<li><b>Numerals</b>, illus. <span class="righttext"><a href="#Page173">173</a></span></li> - -<li class="startletter"><b>Oblique</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Oblique Lines</b> <span class="righttext">How to Draw, <a href="#Page32">32</a>, <a href="#Page58">58</a>, -illus. <a href="#Page59">59</a>, <a href="#Page63">63</a></span></li> - -<li><b>Oblong</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Obtuse Angle</b>, def. <span class="righttext"><a href="#Page42">42</a></span></li> - -<li><b>Obtuse-Angled Triangle</b>, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li><b>Octahedron</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Octagon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> -<li class="level1">To Describe on a given straight line <span class="righttext"><a href="#Page95">95</a></span></li> -<li class="level1">To Inscribe in a circle <span class="righttext"><a href="#Page96">96</a></span></li> - -<li><b>Oil Can</b>, illus. <span class="righttext"><a href="#Page77">77</a></span></li> - -<li><b>Optic Nerve</b>, illus. <span class="righttext"><a href="#Page253">253</a></span></li> - -<li><b>Optics</b>, in Drawing, def. <span class="righttext"><a href="#Page252">252</a></span></li> - -<li><b>Outline Picture</b>, desc. <span class="righttext"><a href="#Page152">152</a></span></li> - -<li><b>Oval</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> -<li class="level1">How to Draw an <span class="righttext"><a href="#Page71">71</a></span></li> - -<li><b>Overall</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li class="startletter"><b>Paper</b>, Fastening Drawing on<span class="pagenum" id="Page292">[292]</span> -<span class="righttext"><a href="#Page184">184</a></span></li> -<li class="level1">Rule or Scale <span class="righttext"><a href="#Page242">242</a></span></li> -<li class="level1">Sensitized, desc. <span class="righttext"><a href="#Page188">188</a></span></li> -<li class="level1">The Right Side of <span class="righttext"><a href="#Page241">241</a></span></li> - -<li><b>Parallel</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Parallel Lines</b>, def. <span class="righttext"><a href="#Page83">83</a>, <a href="#Page252">252</a></span></li> -<li class="level1">To Draw <span class="righttext"><a href="#Page88">88</a></span></li> -<li class="level1">In Perspective <span class="righttext"><a href="#Page251">251</a></span></li> - -<li><b>Parallel Perspective Drawing</b>, illus. <span class="righttext"><a href="#Page260">260</a> to -<a href="#Page263">263</a></span></li> - -<li><b>Parallel Rule</b> <span class="righttext">desc. <a href="#Page115">115</a>, illus. -<a href="#Page114">114-5</a></span></li> - -<li><b>Parallelogram</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> -<li class="level1">To Construct <span class="righttext"><a href="#Page93">93</a></span></li> - -<li><b>Pasting Drawing Paper</b>, “Points” <span class="righttext"><a href="#Page243">243</a></span></li> - -<li><b>Patent Office Drawings</b> <span class="righttext"><a href="#Page235">235</a>, illus. -<a href="#Page236">236</a></span></li> -<li class="level1">Rules of Great Britain <span class="righttext"><a href="#Page236">236</a></span></li> -<li class="level1">Rules of U. S. <span class="righttext"><a href="#Page233">233</a></span></li> - -<li><b>Patterns</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> -<li class="level1">Numbering, from drawings <span class="righttext"><a href="#Page194">194</a></span></li> - -<li><b>Pedestal</b>, illus. <span class="righttext"><a href="#Page178">178-9</a></span></li> - -<li><b>Pen</b>, Hand holding, illus. <span class="righttext"><a href="#Page166">166</a>, <a href="#Page169">169</a>, -<a href="#Page170">170</a></span></li> - -<li><b>Pencil</b>, Function of a <span class="righttext"><a href="#Page142">142</a></span></li> -<li class="level1">How to Cut, illus. <span class="righttext"><a href="#Page57">57</a></span></li> -<li class="level1">How to Hold, illus. <span class="righttext"><a href="#Page54">54</a>, <a href="#Page59">59</a>, -<a href="#Page60">60</a></span></li> -<li class="level1">How to Use <span class="righttext"><a href="#Page56">56</a></span></li> - -<li><b>Pencil-Compasses</b>, desc. <span class="righttext"><a href="#Page143">143</a></span></li> -<li class="level1">How to Hold <span class="righttext"><a href="#Page143">143</a></span></li> - -<li><b>Penciling</b>, desc. and illus. <span class="righttext"><a href="#Page139">139</a></span></li> -<li class="level1">“Points” <span class="righttext"><a href="#Page143">143</a>, <a href="#Page240">240</a></span></li> - -<li><b>Pencil Lines</b>, How to Make <span class="righttext"><a href="#Page119">119</a></span></li> - -<li><b>Pencils</b>, Sharpening Points of <span class="righttext"><a href="#Page143">143</a>, -<a href="#Page241">241</a></span></li> - -<li><b>Penknife</b>, illus. <span class="righttext"><a href="#Page52">52</a></span></li> - -<li><b>Pens</b>, Drawing, illus. <span class="righttext"><a href="#Page129">129</a></span></li> -<li class="level1">Lettering and Figuring, illus. <span class="righttext"><a href="#Page172">172</a></span></li> - -<li><b>Pentagon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> -<li class="level1">To Inscribe in a circle <span class="righttext"><a href="#Page94">94</a></span></li> - -<li><b>Perimeter</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> -<li class="level1">Of a Polygon, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Periphery of a Wheel</b>, def. <span class="righttext"><a href="#Page200">200</a></span></li> - -<li><b>Perpendicular</b>, def. <span class="righttext"><a href="#Page47">47</a>, <a href="#Page252">252</a></span></li> - -<li><b>Perpendicular Lines</b>, How to Draw <span class="righttext"><a href="#Page31">31</a>, <a href="#Page61">61</a>, -<a href="#Page62">62</a></span></li> - -<li><b>Perrott, Geo.</b>, Acknowledgement <span class="righttext"><a href="#Page23">23</a>, -<a href="#Page266">266</a></span></li> - -<li><b>Personal</b>, Note from the Author <span class="righttext"><a href="#Page266">266</a></span></li> - -<li><b>Perspective Drawing</b><span class="pagenum" id="Page293">[293]</span> <span class="righttext">def. -<a href="#Page47">47</a>, illus. <a href="#Page250">250</a></span></li> -<li class="level1">Definitions of Terms used in <span class="righttext"><a href="#Page249">249</a></span></li> -<li class="level1">Geometrical Terms used in <span class="righttext"><a href="#Page248">248</a></span></li> -<li class="level1">Of a Bridge, illus. <span class="righttext"><a href="#Page249">249</a></span></li> -<li class="level1">Scale or Approximate <span class="righttext"><a href="#Page257">257</a></span></li> -<li class="level1">Vanishing Point, illus. <span class="righttext"><a href="#Page251">251</a></span></li> -<li class="level1">Water Reflection, illus. <span class="righttext"><a href="#Page246">246</a></span></li> - -<li><b>Perspective</b>, Linear, def. <span class="righttext"><a href="#Page247">247</a></span></li> - -<li><b>Perspective Plane</b>, def. <span class="righttext"><a href="#Page250">250</a></span></li> - -<li><b>Picture Plane</b>, desc. <span class="righttext"><a href="#Page255">255</a></span></li> -<li class="level1">In Drawing, illus. <span class="righttext"><a href="#Page249">249</a>, -<a href="#Page250">250</a></span></li> -<li class="level1">In Perspective, illus. <span class="righttext"><a href="#Page258">258</a></span></li> - -<li><b>Pinion-Wheel</b>, desc. <span class="righttext"><a href="#Page201">201</a></span></li> - -<li><b>Piston Rod</b>, desc. <span class="righttext"><a href="#Page223">223</a></span></li> - -<li><b>Pitch Circle</b> in Gearing <span class="righttext"><a href="#Page200">200</a></span></li> - -<li><b>Pitch Line</b>, Drawing the <span class="righttext"><a href="#Page209">209</a></span></li> -<li class="level1">In Gearing <span class="righttext"><a href="#Page200">200</a></span></li> - -<li><b>Plan</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Plan of the Work</b> <span class="righttext"><a href="#Page21">21</a></span></li> - -<li><b>Plane</b>, in Perspective, def. <span class="righttext"><a href="#Page249">249</a></span></li> - -<li><b>Plane of the Picture</b>, def. <span class="righttext"><a href="#Page250">250</a></span></li> - -<li><b>Plane Surface</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Point</b>, def. <span class="righttext"><a href="#Page82">82</a></span></li> - -<li><b>Point of Sight</b>, in Perspective Drawing <span class="righttext"><a href="#Page251">251</a></span></li> - -<li><b>Points</b>, relating to Chalk Drawings <span class="righttext"><a href="#Page36">36</a></span></li> -<li class="level1">To be observed in Sketching <span class="righttext"><a href="#Page141">141-2</a></span></li> -<li class="level1">Useful Hints and <span class="righttext"><a href="#Page170">170</a>, -<a href="#Page239">239</a></span></li> - -<li><b>Polygon</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Polyhedron</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Postulate</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Pounce</b>, How to Use, desc. <span class="righttext"><a href="#Page170">170</a>, -<a href="#Page186">186</a></span></li> - -<li><b>Preface</b> <span class="righttext"><a href="#Page13">13</a></span></li> - -<li><b>Preparatory Practice</b> in Drawing <span class="righttext"><a href="#Page30">30</a></span></li> - -<li><b>Prism</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Problems</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> -<li class="level1">Geometrical <span class="righttext"><a href="#Page86">86</a></span></li> - -<li><b>Produce</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Profile</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Projection</b>, Backward, illus. <span class="righttext"><a href="#Page153">153-4</a></span></li> -<li class="level1">Def. <span class="righttext"><a href="#Page49">49</a></span></li> -<li class="level1">Cylindrical Outline, desc. <span class="righttext"><a href="#Page159">159</a></span></li> -<li class="level1">Cylindrical Surface, illus. <span class="righttext"><a href="#Page161">161</a></span></li> -<li class="level1">Forward<span class="pagenum" id="Page294">[294]</span> <span class="righttext">desc. -<a href="#Page152">152</a>, illus. <a href="#Page155">155</a></span></li> -<li class="level1">Hexagon Nut, illus. <span class="righttext"><a href="#Page160">160</a></span></li> -<li class="level1">Marking Dimensions <span class="righttext"><a href="#Page150">150</a></span></li> -<li class="level1">Lines of Sight <span class="righttext"><a href="#Page150">150</a></span></li> -<li class="level1">Scaling and Measuring in <span class="righttext"><a href="#Page149">149</a></span></li> -<li class="level1">Sight-Lines, illus. <span class="righttext"><a href="#Page151">151</a></span></li> -<li class="level1">Sloping Surface, desc. <span class="righttext"><a href="#Page159">159</a></span></li> -<li class="level1">Spur-Wheel, desc. <span class="righttext"><a href="#Page162">162</a></span></li> - -<li><b>Projection Drawing</b>, desc. <span class="righttext"><a href="#Page148">148</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page149">149</a>, <a href="#Page151">151</a>, -<a href="#Page153">153</a>, <a href="#Page154">154</a>, <a href="#Page155">155</a>, <a href="#Page157">157</a>, -<a href="#Page158">158</a>, <a href="#Page160">160</a>, <a href="#Page161">161</a>, <a href="#Page163">163</a></span></li> -<li class="level1">Principles of <span class="righttext"><a href="#Page148">148</a></span></li> -<li class="level1">Spur-Wheel, illus. <span class="righttext"><a href="#Page163">163</a>, -<a href="#Page212">212</a></span></li> - -<li><b>Proportional Dividers</b>, illus. <span class="righttext"><a href="#Page120">120</a></span></li> - -<li><b>Proportions</b> of Teeth of Wheels <span class="righttext"><a href="#Page210">210</a></span></li> - -<li><b>Proposition</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Protractor</b>, desc. <span class="righttext"><a href="#Page128">128</a></span></li> - -<li><b>Pulley and Friction Clutch</b>, illus. <span class="righttext"><a href="#Page224">224</a></span></li> - -<li><b>Punching Press</b> <span class="righttext">illus. <a href="#Page222">222</a>, desc. -<a href="#Page223">223</a></span></li> - -<li class="startletter"><b>Quadrant</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Quadrilateral</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Quadrisect</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li class="startletter"><b>Rack and Pinion</b>, desc. <span class="righttext"><a href="#Page205">205</a></span></li> - -<li><b>Radius of a Circle</b> <span class="righttext"><a href="#Page43">43</a></span></li> - -<li><b>Reading Working Drawings</b>, desc. <span class="righttext"><a href="#Page229">229</a></span></li> - -<li><b>Rectangle</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> -<li class="level1">To Construct a <span class="righttext"><a href="#Page92">92</a></span></li> - -<li><b>Reproducing Drawings</b>, desc. <span class="righttext"><a href="#Page186">186</a></span></li> - -<li><b>Reverse Curve</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Rhomboid</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Rhombus</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Right-Angle</b>, def. <span class="righttext"><a href="#Page42">42</a></span></li> -<li class="level1">Triangle, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li><b>Robinson, A. W., M. E.</b>, note, Office Rules <span class="righttext"><a href="#Page191">191</a></span></li> - -<li><b>Rolling-Circle</b> in Gear-Wheel <span class="righttext"><a href="#Page200">200</a></span></li> - -<li><b>Rule</b>, Area of a Circle, To find the <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Circumference of a Circle, To find the <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Cylinder, To find the contents of a <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Diameter of a Circle, To find the <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page82">82</a></span></li> -<li class="level1">Inscribed Square, To find side of an <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Parallelogram, To find the area of a <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Pyramid or Cone, To find the contents of a <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Radius of a circle, To find the<span class="pagenum" id="Page295">[295]</span> -<span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Sphere, To find the contents of a <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Square, To find the side of an equal <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Trapezoid, To find the area of a <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Triangle, To find the area of a <span class="righttext"><a href="#Page271">271</a></span></li> -<li class="level1">Two-foot <span class="righttext">desc. <a href="#Page127">127</a>, <a href="#Page128">128</a>, illus. -<a href="#Page128">128</a></span></li> -<li class="level1">Wedge, To find the contents of a <span class="righttext"><a href="#Page271">271</a></span></li> - -<li><b>Rules</b> for Drawing Office <span class="righttext"><a href="#Page191">191</a></span></li> -<li class="level1">Wheels, To find proportions of <span class="righttext"><a href="#Page209">209</a></span></li> - -<li class="startletter"><b>Sand Paper</b>, Removing surface of paper -<span class="righttext"><a href="#Page168">168</a></span></li> - -<li><b>Scale</b>, Drawing to, desc. <span class="righttext"><a href="#Page126">126</a></span></li> - -<li><b>Scale Drawings</b>, To read <span class="righttext"><a href="#Page230">230</a></span></li> - -<li><b>Scale</b>, Flat, illus. <span class="righttext"><a href="#Page127">127</a></span></li> -<li class="level1">Triangular, illus. <span class="righttext"><a href="#Page127">127</a></span></li> - -<li><b>Scalene Triangle</b>, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li><b>Scale or Approximate Perspective</b> <span class="righttext"><a href="#Page257">257</a></span></li> - -<li><b>Scale Rule</b>, for Proportions of Teeth <span class="righttext"><a href="#Page214">214</a></span></li> - -<li><b>Scales</b>, Drawing, desc. <span class="righttext"><a href="#Page126">126</a></span></li> - -<li><b>Scholium</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Screw-Thread</b>, U. S. Standard Gauge <span class="righttext"><a href="#Page280">280</a></span></li> - -<li><b>Scroll or Curve</b>, desc. <span class="righttext"><a href="#Page117">117</a></span></li> -<li class="level1">Universal Curve, illus. <span class="righttext"><a href="#Page134">134</a></span></li> - -<li><b>Secant of an Arc</b> <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Section</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> -<li class="level1">Drawing <span class="righttext">illus. <a href="#Page163">163</a>, desc. -<a href="#Page160">160</a></span></li> - -<li><b>Sectional</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Section-Liner</b>, illus. <span class="righttext"><a href="#Page116">116</a></span></li> - -<li><b>Section Lines</b> in Drawings <span class="righttext"><a href="#Page240">240</a></span></li> - -<li><b>Section-Lining</b>, Cast-iron, etc., illus. <span class="righttext"><a href="#Page182">182</a></span></li> -<li class="level1">Cog-Wheel, illus. <span class="righttext"><a href="#Page183">183</a></span></li> - -<li><b>Section-Lining Drawings</b> <span class="righttext">desc. <a href="#Page182">182</a>, illus. -<a href="#Page183">183</a></span></li> -<li class="level1">Wheel Hub, illus. <span class="righttext"><a href="#Page184">184</a></span></li> - -<li><b>Selecting Drawing Instruments</b> <span class="righttext"><a href="#Page103">103</a>, -<a href="#Page240">240</a></span></li> - -<li><b>Semi-Circle</b>, def. <span class="righttext"><a href="#Page43">43</a></span></li> - -<li><b>Sensitized Paper</b>, desc. <span class="righttext"><a href="#Page188">188</a></span></li> - -<li><b>Set-Square</b>, illus. <span class="righttext"><a href="#Page102">102</a>, <a href="#Page114">114</a></span></li> - -<li><b>Shading Curves</b>, illus. <span class="righttext"><a href="#Page181">181</a></span></li> - -<li><b>Shading Drawings</b> <span class="righttext"><a href="#Page180">180</a></span></li> - -<li><b>Shadow</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Shadow Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> - -<li><b>Shadow Lines</b>, “Points” <span class="righttext"><a href="#Page241">241</a></span></li> - -<li><b>Sharpening Pencils</b><span class="pagenum" id="Page296">[296]</span> -<span class="righttext"><a href="#Page57">57</a></span></li> - -<li><b>Shop Drawings</b>, Office Rules <span class="righttext"><a href="#Page192">192</a></span></li> - -<li><b>Sight</b>, Point of, in Perspective Drawing <span class="righttext"><a href="#Page252">252</a></span></li> -<li class="level1">Sense of <span class="righttext"><a href="#Page254">254</a></span></li> - -<li><b>Sight Lines</b> in Projection, illus. <span class="righttext"><a href="#Page157">157</a></span></li> - -<li><b>Sine</b> of an Arc <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Skew-Gearing</b>, desc. <span class="righttext"><a href="#Page203">203</a></span></li> - -<li><b>Sketch Books</b>, desc. <span class="righttext"><a href="#Page142">142</a></span></li> -<li class="level1">Office Practice <span class="righttext"><a href="#Page194">194</a></span></li> - -<li><b>Sketches</b>, details <span class="righttext"><a href="#Page142">142</a></span></li> - -<li><b>Sketch</b>, Free-hand, Advantage of <span class="righttext"><a href="#Page55">55</a></span></li> - -<li><b>Sketching</b> <span class="righttext">desc. <a href="#Page141">141</a>, note <a href="#Page17">17</a></span></li> -<li class="level1">Points to be observed in <span class="righttext"><a href="#Page141">141</a></span>-2</li> - -<li><b>Sloping Surface</b> in Projection <span class="righttext">desc. <a href="#Page159">159</a>, illus. -<a href="#Page166">166</a></span></li> - -<li><b>Solid</b>, def. <span class="righttext"><a href="#Page49">49</a>, <a href="#Page83">83</a></span></li> - -<li><b>Solid Pattern</b>, def. <span class="righttext"><a href="#Page47">47</a></span></li> - -<li><b>Speed of Gears</b> <span class="righttext"><a href="#Page208">208</a></span></li> - -<li><b>Sphere</b>, def. <span class="righttext"><a href="#Page49">49</a></span></li> - -<li><b>Spiral Curve</b>, def. <span class="righttext"><a href="#Page44">44</a></span></li> - -<li><b>Spring Bows</b> <span class="righttext">illus. <a href="#Page122">122</a>, <a href="#Page123">123</a>, desc. -<a href="#Page124">124</a></span></li> - -<li><b>Spur-Gear</b> <span class="righttext">desc. <a href="#Page201">201</a>, illus. <a href="#Page211">211</a></span></li> - -<li><b>Spur Mortise-Wheel</b>, illus. <span class="righttext"><a href="#Page202">202</a></span></li> - -<li><b>Spur-Wheel</b>, desc. <span class="righttext"><a href="#Page199">199</a>, <a href="#Page216">216</a></span></li> -<li class="level1">How to Draw <span class="righttext"><a href="#Page209">209</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page198">198</a></span></li> -<li class="level1">Projection <span class="righttext">desc. <a href="#Page162">162</a>, illus. -<a href="#Page163">163</a></span></li> -<li class="level1">Teeth of cast-iron, desc. <span class="righttext"><a href="#Page202">202</a></span></li> - -<li><b>Square</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> -<li class="level1">To Convert into an Octagon <span class="righttext"><a href="#Page95">95</a></span></li> -<li class="level1">To Describe about a Circle <span class="righttext"><a href="#Page94">94</a></span></li> -<li class="level1">To Inscribe in a Circle <span class="righttext"><a href="#Page93">93</a></span></li> - -<li><b>Standards</b>, for U. S. <span class="righttext"><a href="#Page278">278</a></span></li> -<li class="level1">Office Rules for <span class="righttext"><a href="#Page193">193</a></span></li> - -<li><b>Steady Rest</b>, Scale, illus. <span class="righttext"><a href="#Page228">228</a></span></li> - -<li><b>Straight Line</b>, def. <span class="righttext"><a href="#Page46">46</a></span></li> -<li class="level1">To Draw a Perpendicular to a <span class="righttext"><a href="#Page86">86</a></span></li> -<li class="level1">Drawing Figures of <span class="righttext"><a href="#Page66">66-7-8</a></span></li> -<li class="level1">How to Draw a <span class="righttext"><a href="#Page57">57</a>, <a href="#Page59">59</a></span></li> -<li class="level1">To Bisect a <span class="righttext"><a href="#Page86">86</a></span></li> - -<li><b>Steel</b>, Section-Lining, illus. <span class="righttext"><a href="#Page182">182</a></span></li> - -<li><b>Steel Gears</b>, Economy of <span class="righttext"><a href="#Page216">216</a></span></li> - -<li><b>Surface</b>, def. <span class="righttext"><a href="#Page49">49</a>, <a href="#Page82">82</a></span></li> - -<li><b>Symbols</b>, representing Materials <span class="righttext"><a href="#Page193">193</a></span></li> - -<li class="startletter"><b>Table</b> of Areas of Circles<span class="pagenum" id="Page297">[297]</span> -<span class="righttext"><a href="#Page273">273-277</a></span></li> -<li class="level1">Bolts, Standard Sizes of <span class="righttext"><a href="#Page280">280</a></span></li> -<li class="level1">Circular Measure <span class="righttext"><a href="#Page272">272</a></span></li> -<li class="level1">Circumferences of Circles <span class="righttext"><a href="#Page273">273-277</a></span></li> -<li class="level1">Contents <span class="righttext"><a href="#Page24">24</a></span></li> -<li class="level1">Decimal Equivalents <span class="righttext"><a href="#Page269">269</a></span></li> -<li class="level1">Diameters of Circles <span class="righttext"><a href="#Page273">273-277</a></span></li> -<li class="level1">Land Measure <span class="righttext"><a href="#Page272">272</a></span></li> -<li class="level1">Metric Equivalents <span class="righttext"><a href="#Page270">270</a></span></li> -<li class="level1">Pipe, Standard Sizes of Welded <span class="righttext"><a href="#Page279">279</a></span></li> -<li class="level1">Roman Figures <span class="righttext"><a href="#Page272">272</a></span></li> -<li class="level1">Solid Measure <span class="righttext"><a href="#Page272">272</a></span></li> -<li class="level1">Wire Gauges <span class="righttext"><a href="#Page278">278</a></span></li> -<li class="level1">Useful for Draughtsmen <span class="righttext"><a href="#Page266">266-280</a></span></li> - -<li><b>Tangent</b> of an Arc, def. <span class="righttext"><a href="#Page99">99</a></span></li> -<li class="level1">To Draw a, to a Circle <span class="righttext"><a href="#Page91">91</a></span></li> - -<li><b>Tee-Iron</b>, illus. <span class="righttext"><a href="#Page75">75</a></span></li> - -<li><b>Tee-Square</b>, Adjustable, desc. and illus. <span class="righttext"><a href="#Page113">113</a></span></li> -<li class="level1">Desc. <span class="righttext"><a href="#Page112">112</a></span></li> -<li class="level1">How to Use, illus. <span class="righttext"><a href="#Page111">111</a>, -<a href="#Page147">147</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page102">102</a>, <a href="#Page112">112</a></span></li> -<li class="level1">Points about <span class="righttext"><a href="#Page242">242</a></span></li> - -<li><b>Teeth in Bevel Gears</b>, desc. <span class="righttext"><a href="#Page204">204</a></span></li> - -<li><b>Terms and Definitions</b>, Preliminary <span class="righttext"><a href="#Page41">41</a></span></li> - -<li><b>Test-Pieces</b>, Use of, in Blue Prints <span class="righttext"><a href="#Page188">188</a></span></li> - -<li><b>Tetrahedron</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Theorem</b>, def. <span class="righttext"><a href="#Page83">83</a></span></li> - -<li><b>Thumb-Tack</b> <span class="righttext">illus. <a href="#Page109">109</a>, desc. <a href="#Page110">110</a></span></li> - -<li><b>Tints and Colors</b>, desc. <span class="righttext"><a href="#Page184">184</a></span></li> - -<li><b>Title and Date</b>, on Sketches <span class="righttext"><a href="#Page142">142</a></span></li> - -<li><b>Title, Date, Scale, etc.</b>, Office Rules for <span class="righttext"><a href="#Page192">192</a></span></li> - -<li><b>Title Page</b> <span class="righttext"><a href="#Pagevii">vii</a></span></li> - -<li><b>Tracing-Cloth</b>, desc. <span class="righttext"><a href="#Page186">186</a></span></li> - -<li><b>Tracings</b>, Office Rules for Keeping <span class="righttext"><a href="#Page195">195</a></span></li> -<li class="level1">Tinted and Shaded, desc. <span class="righttext"><a href="#Page184">184</a></span></li> - -<li><b>Trammels</b>, desc. and illus. <span class="righttext"><a href="#Page125">125</a></span></li> - -<li><b>Trapezium</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Trapezoid</b>, def. <span class="righttext"><a href="#Page48">48</a></span></li> - -<li><b>Trestles</b>, Drawing-Board, desc. and illus. <span class="righttext"><a href="#Page110">110</a></span></li> - -<li><b>Triangle</b>, def. <span class="righttext"><a href="#Page50">50</a></span></li> -<li class="level1">To Describe a Circle about a <span class="righttext"><a href="#Page93">93</a></span></li> - -<li><b>Triangle, or Set-Square</b>, desc. and illus. <span class="righttext"><a href="#Page114">114</a></span></li> -<li class="level1">How to Use<span class="pagenum" id="Page298">[298]</span> <span class="righttext">desc. -<a href="#Page147">147</a>, illus. <a href="#Page166">166</a></span></li> - -<li><b>Triangles</b>, illus. <span class="righttext"><a href="#Page102">102</a></span></li> -<li class="level1">To Construct <span class="righttext"><a href="#Page92">92</a></span></li> - -<li><b>Trigonometry</b>, principles and def. <span class="righttext"><a href="#Page98">98</a></span></li> - -<li><b>Trisect</b>, def. <span class="righttext"><a href="#Page50">50</a></span></li> - -<li><b>Trundle Wheel</b> <span class="righttext">desc. <a href="#Page201">201</a>, illus. <a href="#Page208">208</a></span></li> - -<li><b>Two-foot Rule</b>, illus. <span class="righttext"><a href="#Page128">128</a></span></li> - -<li class="startletter"><b>U. S. Standards</b>, Pipes <span class="righttext"><a href="#Page279">279</a></span></li> - -<li><b>Upright Lines</b>, How to Draw <span class="righttext"><a href="#Page61">61</a></span></li> - -<li><b>Useful Tables for Draughtsmen</b> -<span class="righttext"><a href="#Page269">269</a>-<a href="#Page280">280</a></span></li> - -<li class="startletter"><b>Valve</b>, Blow-off <span class="righttext">desc. <a href="#Page174">174</a>, illus. -<a href="#Page175">175</a></span></li> - -<li><b>Valve Gear</b>, or Link Motion, illus. <span class="righttext"><a href="#Page225">225</a></span></li> - -<li><b>Vanishing Point</b>, def. and illus. <span class="righttext"><a href="#Page251">251</a></span></li> -<li class="level1">In Drawing, illus. <span class="righttext"><a href="#Page250">250</a></span></li> -<li class="level1">In Perspective Drawing <span class="righttext"><a href="#Page252">252</a></span></li> - -<li><b>Varnish</b>, Shellac, for Drawings <span class="righttext"><a href="#Page241">241</a></span></li> - -<li><b>Versed Sine</b> of an Arc <span class="righttext"><a href="#Page99">99</a></span></li> - -<li><b>Vertex</b>, def. <span class="righttext"><a href="#Page51">51</a></span></li> -<li class="level1">Of an Angle, def. <span class="righttext"><a href="#Page42">42</a></span></li> - -<li><b>Vertical</b>, def. <span class="righttext"><a href="#Page51">51</a>, <a href="#Page251">251</a></span></li> - -<li><b>Vertical Lines</b>, in Perspective <span class="righttext"><a href="#Page257">257</a></span></li> - -<li><b>Vertical-Plane</b>, def. <span class="righttext"><a href="#Page249">249</a></span></li> - -<li><b>View</b>, def. <span class="righttext"><a href="#Page51">51</a></span></li> - -<li><b>Visual Ray</b> in Perspective Drawing <span class="righttext"><a href="#Page256">256</a></span></li> - -<li><b>Visual Rays of Light</b> <span class="righttext">desc. <a href="#Page252">252</a>, illus. -<a href="#Page255">255</a></span></li> - -<li><b>Vulcanite</b>, Section-Lining, illus. <span class="righttext"><a href="#Page182">182</a></span></li> - -<li class="startletter"><b>Water Reflection</b> in Perspective Drawing, illus. -<span class="righttext"><a href="#Page246">246</a></span></li> - -<li><b>Wheel</b>, Bevel, A, illus. <span class="righttext"><a href="#Page203">203</a></span></li> -<li class="level1">Crown, illus. <span class="righttext"><a href="#Page208">208</a></span></li> -<li class="level1">Helical, A, illus. <span class="righttext"><a href="#Page207">207</a></span></li> -<li class="level1">Hub, Section-Lining, illus. <span class="righttext"><a href="#Page184">184</a></span></li> -<li class="level1">Internal Gear, desc. <span class="righttext"><a href="#Page201">201</a>, -<a href="#Page207">207</a></span></li> -<li class="level1">Miter, A, illus. <span class="righttext"><a href="#Page204">204</a></span></li> -<li class="level1">Proportions of the Teeth of a <span class="righttext"><a href="#Page210">210</a></span></li> -<li class="level1">Spur <span class="righttext">illus. <a href="#Page198">198</a>, desc. <a href="#Page199">199</a>, -<a href="#Page201">201</a></span></li> -<li class="level1">Worm, desc. <span class="righttext"><a href="#Page201">201</a></span></li> - -<li><b>Wood</b>, Section-Lining, illus. <span class="righttext"><a href="#Page182">182</a></span></li> - -<li><b>Working Drawing</b>, Bending Machine <span class="righttext"><a href="#Page220">220-1</a></span></li> -<li class="level1">Def.<span class="pagenum" id="Page299">[299]</span> -<span class="righttext"><a href="#Page51">51</a></span></li> -<li class="level1">Illus. <span class="righttext"><a href="#Page218">218</a>, <a href="#Page220">220</a>, -<a href="#Page221">221</a>, <a href="#Page222">222</a>, <a href="#Page223">223</a>, <a href="#Page224">224</a>, -<a href="#Page225">225</a>, <a href="#Page226">226</a>, <a href="#Page228">228</a></span></li> -<li class="level1">Bumping Post, illus. <span class="righttext"><a href="#Page226">226</a></span></li> -<li class="level1">Points, etc. <span class="righttext"><a href="#Page243">243</a></span></li> -<li class="level1">Power Punching Press <span class="righttext"><a href="#Page222">222</a></span></li> -<li class="level1">Numbering a, Office Rules for <span class="righttext"><a href="#Page195">195</a></span></li> -<li class="level1">To Read a <span class="righttext"><a href="#Page229">229</a></span></li> - -<li><b>Working Drawings</b>, desc. <span class="righttext"><a href="#Page219">219</a>, <a href="#Page227">227</a></span></li> - -<li><b>Worm-Gear</b>, desc. <span class="righttext"><a href="#Page206">206</a></span></li> - -<li><b>Worm-Wheel</b> <span class="righttext">desc. <a href="#Page201">201</a>, illus. <a href="#Page206">206</a></span></li> -<li class="level1">Speed of a <span class="righttext"><a href="#Page216">216</a></span></li> - -<li><b>Wrench</b>, illus. <span class="righttext"><a href="#Page75">75</a></span></li> - -<li><b>Wrist-Lines</b>, illus. <span class="righttext"><a href="#Page64">64</a></span></li> - -<li><b>Wrought-Iron</b>, Section-Lining, illus. <span class="righttext"><a href="#Page182">182</a></span></li> - -</ul> - -<hr class="full" /> - -<div class="tnbot" id="TN"> - -<h2>Transcriber’s Notes</h2> - -<p>Inconsistent and unusual spelling, capitalisation and hyphenation have been retained, unless mentioned below. The -discrepancies between the General List of Contents and the structure of the text have not been corrected.</p> - -<p>Depending on the hard- and software used to read this text and their settings, not all elements may display as intended. -Where scales are given for illustrations, these can, of course, not be relied upon for measurements.</p> - -<p>The numbering of illustrations in the book is inconsistent. Illustrations that have no numbered captions may or may not -be counted; this has not been standardised, except as listed below. Missing illustration numbers have been added only where -they are referenced in the text. The illustrations referred to in the text as Figs. 242 and 243 are captioned Fig. 243 and -244.</p> - -<p>Page 65-69 and Figs. 66-71: the text uses upper case reference letters, the illustrations lower case, which has not been -standardised.</p> - -<p>Page 84, table of symbols: the source document uses letters (O and L) rather than symbols for circle and angle.</p> - -<p>Page 94, Bisect two of the angles <i>A C</i> of the triangle: presumably the unmarked point A is in the lower left-hand -corner of the illustration.</p> - -<p>Page 113, The tee-square, as shown, ...: there is no illustration with the relevant reference numbers; probably the -reference is to Fig. 151/152.</p> - -<p>Page 239, rough irregular lines, as in fig. 134, on page 131: there is no Fig. 134 on page 131; page 134 nor page 131 -show the rough irregular lines. Several other illustrations in the book do show such lines.</p> - -<p>Index: the order of entries is as printed in the source document.</p> - -<p class="blankbefore75">Changes made:</p> - -<p>Illustrations and Notes have been moved out of text paragraphs.</p> - -<p>Some obvious minor punctuation and typographical errors have been corrected silently.</p> - -<p>In some tables the ditto symbol („) has been replaced with the dittoed text; the use of × and x in -multiplications and dimensions has been standardised to ×.</p> - -<p>Page 48: Figure numbers 45-49 added to illustration.</p> - -<p>Page 89: and on <i>B</i> on <i>B I</i> changed to and on <i>B</i> on <i>B D</i>.</p> - -<p>Page 177: D = diam. of collar changed to d = diam. of collar.</p> - -<p>Page 193: Bbt.--Babbit. changed to Bbt.--Babbitt.</p> - -<p>Page 203: as described on page 191 changed to as described on page 199.</p> - -<p>Page 214: 4 tenths measured at the 2′ line changed to 4 tenths measured at the 2″ line.</p> - -</div><!--TN--> - -<div style='display:block; margin-top:4em'>*** END OF THE PROJECT GUTENBERG EBOOK SELF-HELP MECHANICAL DRAWING ***</div> -<div style='text-align:left'> - -<div style='display:block; margin:1em 0'> -Updated editions will replace the previous one—the old editions will -be renamed. -</div> - -<div style='display:block; margin:1em 0'> -Creating the works from print editions not protected by U.S. copyright -law means that no one owns a United States copyright in these works, -so the Foundation (and you!) can copy and distribute it in the United -States without permission and without paying copyright -royalties. Special rules, set forth in the General Terms of Use part -of this license, apply to copying and distributing Project -Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ -concept and trademark. Project Gutenberg is a registered trademark, -and may not be used if you charge for an eBook, except by following -the terms of the trademark license, including paying royalties for use -of the Project Gutenberg trademark. If you do not charge anything for -copies of this eBook, complying with the trademark license is very -easy. You may use this eBook for nearly any purpose such as creation -of derivative works, reports, performances and research. Project -Gutenberg eBooks may be modified and printed and given away--you may -do practically ANYTHING in the United States with eBooks not protected -by U.S. copyright law. Redistribution is subject to the trademark -license, especially commercial redistribution. -</div> - -<div style='margin:0.83em 0; font-size:1.1em; text-align:center'>START: FULL LICENSE<br /> -<span style='font-size:smaller'>THE FULL PROJECT GUTENBERG LICENSE<br /> -PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK</span> -</div> - -<div style='display:block; margin:1em 0'> -To protect the Project Gutenberg™ mission of promoting the free -distribution of electronic works, by using or distributing this work -(or any other work associated in any way with the phrase “Project -Gutenberg”), you agree to comply with all the terms of the Full -Project Gutenberg™ License available with this file or online at -www.gutenberg.org/license. -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works -</div> - -<div style='display:block; margin:1em 0'> -1.A. By reading or using any part of this Project Gutenberg™ -electronic work, you indicate that you have read, understand, agree to -and accept all the terms of this license and intellectual property -(trademark/copyright) agreement. If you do not agree to abide by all -the terms of this agreement, you must cease using and return or -destroy all copies of Project Gutenberg™ electronic works in your -possession. If you paid a fee for obtaining a copy of or access to a -Project Gutenberg™ electronic work and you do not agree to be bound -by the terms of this agreement, you may obtain a refund from the person -or entity to whom you paid the fee as set forth in paragraph 1.E.8. -</div> - -<div style='display:block; margin:1em 0'> -1.B. “Project Gutenberg” is a registered trademark. It may only be -used on or associated in any way with an electronic work by people who -agree to be bound by the terms of this agreement. There are a few -things that you can do with most Project Gutenberg™ electronic works -even without complying with the full terms of this agreement. See -paragraph 1.C below. There are a lot of things you can do with Project -Gutenberg™ electronic works if you follow the terms of this -agreement and help preserve free future access to Project Gutenberg™ -electronic works. See paragraph 1.E below. -</div> - -<div style='display:block; margin:1em 0'> -1.C. The Project Gutenberg Literary Archive Foundation (“the -Foundation” or PGLAF), owns a compilation copyright in the collection -of Project Gutenberg™ electronic works. Nearly all the individual -works in the collection are in the public domain in the United -States. If an individual work is unprotected by copyright law in the -United States and you are located in the United States, we do not -claim a right to prevent you from copying, distributing, performing, -displaying or creating derivative works based on the work as long as -all references to Project Gutenberg are removed. Of course, we hope -that you will support the Project Gutenberg™ mission of promoting -free access to electronic works by freely sharing Project Gutenberg™ -works in compliance with the terms of this agreement for keeping the -Project Gutenberg™ name associated with the work. You can easily -comply with the terms of this agreement by keeping this work in the -same format with its attached full Project Gutenberg™ License when -you share it without charge with others. -</div> - -<div style='display:block; margin:1em 0'> -1.D. The copyright laws of the place where you are located also govern -what you can do with this work. Copyright laws in most countries are -in a constant state of change. If you are outside the United States, -check the laws of your country in addition to the terms of this -agreement before downloading, copying, displaying, performing, -distributing or creating derivative works based on this work or any -other Project Gutenberg™ work. The Foundation makes no -representations concerning the copyright status of any work in any -country other than the United States. -</div> - -<div style='display:block; margin:1em 0'> -1.E. Unless you have removed all references to Project Gutenberg: -</div> - -<div style='display:block; margin:1em 0'> -1.E.1. The following sentence, with active links to, or other -immediate access to, the full Project Gutenberg™ License must appear -prominently whenever any copy of a Project Gutenberg™ work (any work -on which the phrase “Project Gutenberg” appears, or with which the -phrase “Project Gutenberg” is associated) is accessed, displayed, -performed, viewed, copied or distributed: -</div> - -<blockquote> - <div style='display:block; margin:1em 0'> - This eBook is for the use of anyone anywhere in the United States and most - other parts of the world at no cost and with almost no restrictions - whatsoever. You may copy it, give it away or re-use it under the terms - of the Project Gutenberg License included with this eBook or online - at <a href="https://www.gutenberg.org">www.gutenberg.org</a>. If you - are not located in the United States, you will have to check the laws - of the country where you are located before using this eBook. - </div> -</blockquote> - -<div style='display:block; margin:1em 0'> -1.E.2. If an individual Project Gutenberg™ electronic work is -derived from texts not protected by U.S. copyright law (does not -contain a notice indicating that it is posted with permission of the -copyright holder), the work can be copied and distributed to anyone in -the United States without paying any fees or charges. If you are -redistributing or providing access to a work with the phrase “Project -Gutenberg” associated with or appearing on the work, you must comply -either with the requirements of paragraphs 1.E.1 through 1.E.7 or -obtain permission for the use of the work and the Project Gutenberg™ -trademark as set forth in paragraphs 1.E.8 or 1.E.9. -</div> - -<div style='display:block; margin:1em 0'> -1.E.3. If an individual Project Gutenberg™ electronic work is posted -with the permission of the copyright holder, your use and distribution -must comply with both paragraphs 1.E.1 through 1.E.7 and any -additional terms imposed by the copyright holder. Additional terms -will be linked to the Project Gutenberg™ License for all works -posted with the permission of the copyright holder found at the -beginning of this work. -</div> - -<div style='display:block; margin:1em 0'> -1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ -License terms from this work, or any files containing a part of this -work or any other work associated with Project Gutenberg™. -</div> - -<div style='display:block; margin:1em 0'> -1.E.5. Do not copy, display, perform, distribute or redistribute this -electronic work, or any part of this electronic work, without -prominently displaying the sentence set forth in paragraph 1.E.1 with -active links or immediate access to the full terms of the Project -Gutenberg™ License. -</div> - -<div style='display:block; margin:1em 0'> -1.E.6. You may convert to and distribute this work in any binary, -compressed, marked up, nonproprietary or proprietary form, including -any word processing or hypertext form. However, if you provide access -to or distribute copies of a Project Gutenberg™ work in a format -other than “Plain Vanilla ASCII” or other format used in the official -version posted on the official Project Gutenberg™ website -(www.gutenberg.org), you must, at no additional cost, fee or expense -to the user, provide a copy, a means of exporting a copy, or a means -of obtaining a copy upon request, of the work in its original “Plain -Vanilla ASCII” or other form. Any alternate format must include the -full Project Gutenberg™ License as specified in paragraph 1.E.1. -</div> - -<div style='display:block; margin:1em 0'> -1.E.7. Do not charge a fee for access to, viewing, displaying, -performing, copying or distributing any Project Gutenberg™ works -unless you comply with paragraph 1.E.8 or 1.E.9. -</div> - -<div style='display:block; margin:1em 0'> -1.E.8. You may charge a reasonable fee for copies of or providing -access to or distributing Project Gutenberg™ electronic works -provided that: -</div> - -<div style='margin-left:0.7em;'> - <div style='text-indent:-0.7em'> - • You pay a royalty fee of 20% of the gross profits you derive from - the use of Project Gutenberg™ works calculated using the method - you already use to calculate your applicable taxes. The fee is owed - to the owner of the Project Gutenberg™ trademark, but he has - agreed to donate royalties under this paragraph to the Project - Gutenberg Literary Archive Foundation. Royalty payments must be paid - within 60 days following each date on which you prepare (or are - legally required to prepare) your periodic tax returns. Royalty - payments should be clearly marked as such and sent to the Project - Gutenberg Literary Archive Foundation at the address specified in - Section 4, “Information about donations to the Project Gutenberg - Literary Archive Foundation.” - </div> - - <div style='text-indent:-0.7em'> - • You provide a full refund of any money paid by a user who notifies - you in writing (or by e-mail) within 30 days of receipt that s/he - does not agree to the terms of the full Project Gutenberg™ - License. You must require such a user to return or destroy all - copies of the works possessed in a physical medium and discontinue - all use of and all access to other copies of Project Gutenberg™ - works. - </div> - - <div style='text-indent:-0.7em'> - • You provide, in accordance with paragraph 1.F.3, a full refund of - any money paid for a work or a replacement copy, if a defect in the - electronic work is discovered and reported to you within 90 days of - receipt of the work. - </div> - - <div style='text-indent:-0.7em'> - • You comply with all other terms of this agreement for free - distribution of Project Gutenberg™ works. - </div> -</div> - -<div style='display:block; margin:1em 0'> -1.E.9. If you wish to charge a fee or distribute a Project -Gutenberg™ electronic work or group of works on different terms than -are set forth in this agreement, you must obtain permission in writing -from the Project Gutenberg Literary Archive Foundation, the manager of -the Project Gutenberg™ trademark. Contact the Foundation as set -forth in Section 3 below. -</div> - -<div style='display:block; margin:1em 0'> -1.F. -</div> - -<div style='display:block; margin:1em 0'> -1.F.1. Project Gutenberg volunteers and employees expend considerable -effort to identify, do copyright research on, transcribe and proofread -works not protected by U.S. copyright law in creating the Project -Gutenberg™ collection. Despite these efforts, Project Gutenberg™ -electronic works, and the medium on which they may be stored, may -contain “Defects,” such as, but not limited to, incomplete, inaccurate -or corrupt data, transcription errors, a copyright or other -intellectual property infringement, a defective or damaged disk or -other medium, a computer virus, or computer codes that damage or -cannot be read by your equipment. -</div> - -<div style='display:block; margin:1em 0'> -1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right -of Replacement or Refund” described in paragraph 1.F.3, the Project -Gutenberg Literary Archive Foundation, the owner of the Project -Gutenberg™ trademark, and any other party distributing a Project -Gutenberg™ electronic work under this agreement, disclaim all -liability to you for damages, costs and expenses, including legal -fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT -LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE -PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE -TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE -LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR -INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH -DAMAGE. -</div> - -<div style='display:block; margin:1em 0'> -1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a -defect in this electronic work within 90 days of receiving it, you can -receive a refund of the money (if any) you paid for it by sending a -written explanation to the person you received the work from. If you -received the work on a physical medium, you must return the medium -with your written explanation. The person or entity that provided you -with the defective work may elect to provide a replacement copy in -lieu of a refund. If you received the work electronically, the person -or entity providing it to you may choose to give you a second -opportunity to receive the work electronically in lieu of a refund. If -the second copy is also defective, you may demand a refund in writing -without further opportunities to fix the problem. -</div> - -<div style='display:block; margin:1em 0'> -1.F.4. Except for the limited right of replacement or refund set forth -in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO -OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT -LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. -</div> - -<div style='display:block; margin:1em 0'> -1.F.5. Some states do not allow disclaimers of certain implied -warranties or the exclusion or limitation of certain types of -damages. If any disclaimer or limitation set forth in this agreement -violates the law of the state applicable to this agreement, the -agreement shall be interpreted to make the maximum disclaimer or -limitation permitted by the applicable state law. The invalidity or -unenforceability of any provision of this agreement shall not void the -remaining provisions. -</div> - -<div style='display:block; margin:1em 0'> -1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the -trademark owner, any agent or employee of the Foundation, anyone -providing copies of Project Gutenberg™ electronic works in -accordance with this agreement, and any volunteers associated with the -production, promotion and distribution of Project Gutenberg™ -electronic works, harmless from all liability, costs and expenses, -including legal fees, that arise directly or indirectly from any of -the following which you do or cause to occur: (a) distribution of this -or any Project Gutenberg™ work, (b) alteration, modification, or -additions or deletions to any Project Gutenberg™ work, and (c) any -Defect you cause. -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 2. Information about the Mission of Project Gutenberg™ -</div> - -<div style='display:block; margin:1em 0'> -Project Gutenberg™ is synonymous with the free distribution of -electronic works in formats readable by the widest variety of -computers including obsolete, old, middle-aged and new computers. It -exists because of the efforts of hundreds of volunteers and donations -from people in all walks of life. -</div> - -<div style='display:block; margin:1em 0'> -Volunteers and financial support to provide volunteers with the -assistance they need are critical to reaching Project Gutenberg™’s -goals and ensuring that the Project Gutenberg™ collection will -remain freely available for generations to come. In 2001, the Project -Gutenberg Literary Archive Foundation was created to provide a secure -and permanent future for Project Gutenberg™ and future -generations. To learn more about the Project Gutenberg Literary -Archive Foundation and how your efforts and donations can help, see -Sections 3 and 4 and the Foundation information page at www.gutenberg.org. -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 3. Information about the Project Gutenberg Literary Archive Foundation -</div> - -<div style='display:block; margin:1em 0'> -The Project Gutenberg Literary Archive Foundation is a non-profit -501(c)(3) educational corporation organized under the laws of the -state of Mississippi and granted tax exempt status by the Internal -Revenue Service. The Foundation’s EIN or federal tax identification -number is 64-6221541. Contributions to the Project Gutenberg Literary -Archive Foundation are tax deductible to the full extent permitted by -U.S. federal laws and your state’s laws. -</div> - -<div style='display:block; margin:1em 0'> -The Foundation’s business office is located at 809 North 1500 West, -Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up -to date contact information can be found at the Foundation’s website -and official page at www.gutenberg.org/contact -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation -</div> - -<div style='display:block; margin:1em 0'> -Project Gutenberg™ depends upon and cannot survive without widespread -public support and donations to carry out its mission of -increasing the number of public domain and licensed works that can be -freely distributed in machine-readable form accessible by the widest -array of equipment including outdated equipment. Many small donations -($1 to $5,000) are particularly important to maintaining tax exempt -status with the IRS. -</div> - -<div style='display:block; margin:1em 0'> -The Foundation is committed to complying with the laws regulating -charities and charitable donations in all 50 states of the United -States. Compliance requirements are not uniform and it takes a -considerable effort, much paperwork and many fees to meet and keep up -with these requirements. We do not solicit donations in locations -where we have not received written confirmation of compliance. To SEND -DONATIONS or determine the status of compliance for any particular state -visit <a href="https://www.gutenberg.org/donate/">www.gutenberg.org/donate</a>. -</div> - -<div style='display:block; margin:1em 0'> -While we cannot and do not solicit contributions from states where we -have not met the solicitation requirements, we know of no prohibition -against accepting unsolicited donations from donors in such states who -approach us with offers to donate. -</div> - -<div style='display:block; margin:1em 0'> -International donations are gratefully accepted, but we cannot make -any statements concerning tax treatment of donations received from -outside the United States. U.S. laws alone swamp our small staff. -</div> - -<div style='display:block; margin:1em 0'> -Please check the Project Gutenberg web pages for current donation -methods and addresses. Donations are accepted in a number of other -ways including checks, online payments and credit card donations. To -donate, please visit: www.gutenberg.org/donate -</div> - -<div style='display:block; font-size:1.1em; margin:1em 0; font-weight:bold'> -Section 5. General Information About Project Gutenberg™ electronic works -</div> - -<div style='display:block; margin:1em 0'> -Professor Michael S. Hart was the originator of the Project -Gutenberg™ concept of a library of electronic works that could be -freely shared with anyone. For forty years, he produced and -distributed Project Gutenberg™ eBooks with only a loose network of -volunteer support. -</div> - -<div style='display:block; margin:1em 0'> -Project Gutenberg™ eBooks are often created from several printed -editions, all of which are confirmed as not protected by copyright in -the U.S. unless a copyright notice is included. Thus, we do not -necessarily keep eBooks in compliance with any particular paper -edition. -</div> - -<div style='display:block; margin:1em 0'> -Most people start at our website which has the main PG search -facility: <a href="https://www.gutenberg.org">www.gutenberg.org</a>. -</div> - -<div style='display:block; margin:1em 0'> -This website includes information about Project Gutenberg™, -including how to make donations to the Project Gutenberg Literary -Archive Foundation, how to help produce our new eBooks, and how to -subscribe to our email newsletter to hear about new eBooks. -</div> - -</div> -</body> -</html> diff --git a/old/67166-h/images/cover.jpg b/old/67166-h/images/cover.jpg Binary files differdeleted file mode 100644 index 6aba549..0000000 --- a/old/67166-h/images/cover.jpg +++ /dev/null diff --git a/old/67166-h/images/illo003.jpg b/old/67166-h/images/illo003.jpg Binary files differdeleted file mode 100644 index bb0e5a9..0000000 --- a/old/67166-h/images/illo003.jpg +++ /dev/null diff --git a/old/67166-h/images/illo004.jpg b/old/67166-h/images/illo004.jpg Binary files differdeleted file mode 100644 index 349c02e..0000000 --- a/old/67166-h/images/illo004.jpg +++ /dev/null diff --git a/old/67166-h/images/illo006.png b/old/67166-h/images/illo006.png Binary files differdeleted file mode 100644 index 26eb447..0000000 --- a/old/67166-h/images/illo006.png +++ /dev/null diff --git a/old/67166-h/images/illo007.png b/old/67166-h/images/illo007.png Binary files differdeleted file mode 100644 index 556ab36..0000000 --- a/old/67166-h/images/illo007.png +++ /dev/null diff --git a/old/67166-h/images/illo010.jpg b/old/67166-h/images/illo010.jpg Binary files differdeleted file mode 100644 index 26e0d96..0000000 --- a/old/67166-h/images/illo010.jpg +++ /dev/null diff --git a/old/67166-h/images/illo011.png b/old/67166-h/images/illo011.png Binary files differdeleted file mode 100644 index ab771c1..0000000 --- a/old/67166-h/images/illo011.png +++ /dev/null diff --git a/old/67166-h/images/illo018.jpg b/old/67166-h/images/illo018.jpg Binary files differdeleted file mode 100644 index fa52495..0000000 --- a/old/67166-h/images/illo018.jpg +++ /dev/null diff --git a/old/67166-h/images/illo019.png b/old/67166-h/images/illo019.png Binary files differdeleted file mode 100644 index 946ee6f..0000000 --- a/old/67166-h/images/illo019.png +++ /dev/null diff --git a/old/67166-h/images/illo025.png b/old/67166-h/images/illo025.png Binary files differdeleted file mode 100644 index 01b5867..0000000 --- a/old/67166-h/images/illo025.png +++ /dev/null diff --git a/old/67166-h/images/illo027a.jpg b/old/67166-h/images/illo027a.jpg Binary files differdeleted file mode 100644 index 6da436a..0000000 --- a/old/67166-h/images/illo027a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo027b028.jpg b/old/67166-h/images/illo027b028.jpg Binary files differdeleted file mode 100644 index a3de2d7..0000000 --- a/old/67166-h/images/illo027b028.jpg +++ /dev/null diff --git a/old/67166-h/images/illo029.jpg b/old/67166-h/images/illo029.jpg Binary files differdeleted file mode 100644 index 90a80c0..0000000 --- a/old/67166-h/images/illo029.jpg +++ /dev/null diff --git a/old/67166-h/images/illo031.png b/old/67166-h/images/illo031.png Binary files differdeleted file mode 100644 index 944fd9d..0000000 --- a/old/67166-h/images/illo031.png +++ /dev/null diff --git a/old/67166-h/images/illo032.png b/old/67166-h/images/illo032.png Binary files differdeleted file mode 100644 index 95f0103..0000000 --- a/old/67166-h/images/illo032.png +++ /dev/null diff --git a/old/67166-h/images/illo033a.png b/old/67166-h/images/illo033a.png Binary files differdeleted file mode 100644 index 82b9331..0000000 --- a/old/67166-h/images/illo033a.png +++ /dev/null diff --git a/old/67166-h/images/illo033b.png b/old/67166-h/images/illo033b.png Binary files differdeleted file mode 100644 index c5227be..0000000 --- a/old/67166-h/images/illo033b.png +++ /dev/null diff --git a/old/67166-h/images/illo034a.png b/old/67166-h/images/illo034a.png Binary files differdeleted file mode 100644 index 6c5fd15..0000000 --- a/old/67166-h/images/illo034a.png +++ /dev/null diff --git a/old/67166-h/images/illo034b.png b/old/67166-h/images/illo034b.png Binary files differdeleted file mode 100644 index b5f36f8..0000000 --- a/old/67166-h/images/illo034b.png +++ /dev/null diff --git a/old/67166-h/images/illo035a.png b/old/67166-h/images/illo035a.png Binary files differdeleted file mode 100644 index aa8a097..0000000 --- a/old/67166-h/images/illo035a.png +++ /dev/null diff --git a/old/67166-h/images/illo035b.png b/old/67166-h/images/illo035b.png Binary files differdeleted file mode 100644 index ecbcc02..0000000 --- a/old/67166-h/images/illo035b.png +++ /dev/null diff --git a/old/67166-h/images/illo036.png b/old/67166-h/images/illo036.png Binary files differdeleted file mode 100644 index 6716be7..0000000 --- a/old/67166-h/images/illo036.png +++ /dev/null diff --git a/old/67166-h/images/illo037.jpg b/old/67166-h/images/illo037.jpg Binary files differdeleted file mode 100644 index 2b394d4..0000000 --- a/old/67166-h/images/illo037.jpg +++ /dev/null diff --git a/old/67166-h/images/illo039.png b/old/67166-h/images/illo039.png Binary files differdeleted file mode 100644 index 9260e45..0000000 --- a/old/67166-h/images/illo039.png +++ /dev/null diff --git a/old/67166-h/images/illo040.jpg b/old/67166-h/images/illo040.jpg Binary files differdeleted file mode 100644 index 97eb8de..0000000 --- a/old/67166-h/images/illo040.jpg +++ /dev/null diff --git a/old/67166-h/images/illo041.png b/old/67166-h/images/illo041.png Binary files differdeleted file mode 100644 index f3013ca..0000000 --- a/old/67166-h/images/illo041.png +++ /dev/null diff --git a/old/67166-h/images/illo042a.png b/old/67166-h/images/illo042a.png Binary files differdeleted file mode 100644 index d85139d..0000000 --- a/old/67166-h/images/illo042a.png +++ /dev/null diff --git a/old/67166-h/images/illo042b.png b/old/67166-h/images/illo042b.png Binary files differdeleted file mode 100644 index 5fb60c9..0000000 --- a/old/67166-h/images/illo042b.png +++ /dev/null diff --git a/old/67166-h/images/illo042c.png b/old/67166-h/images/illo042c.png Binary files differdeleted file mode 100644 index 9b89247..0000000 --- a/old/67166-h/images/illo042c.png +++ /dev/null diff --git a/old/67166-h/images/illo042d.png b/old/67166-h/images/illo042d.png Binary files differdeleted file mode 100644 index e3667d5..0000000 --- a/old/67166-h/images/illo042d.png +++ /dev/null diff --git a/old/67166-h/images/illo043.png b/old/67166-h/images/illo043.png Binary files differdeleted file mode 100644 index 63a1307..0000000 --- a/old/67166-h/images/illo043.png +++ /dev/null diff --git a/old/67166-h/images/illo047a.png b/old/67166-h/images/illo047a.png Binary files differdeleted file mode 100644 index dd945b6..0000000 --- a/old/67166-h/images/illo047a.png +++ /dev/null diff --git a/old/67166-h/images/illo047b.png b/old/67166-h/images/illo047b.png Binary files differdeleted file mode 100644 index ef9f3d6..0000000 --- a/old/67166-h/images/illo047b.png +++ /dev/null diff --git a/old/67166-h/images/illo048a.png b/old/67166-h/images/illo048a.png Binary files differdeleted file mode 100644 index 940ce71..0000000 --- a/old/67166-h/images/illo048a.png +++ /dev/null diff --git a/old/67166-h/images/illo048b.png b/old/67166-h/images/illo048b.png Binary files differdeleted file mode 100644 index 7b2b85d..0000000 --- a/old/67166-h/images/illo048b.png +++ /dev/null diff --git a/old/67166-h/images/illo048c.png b/old/67166-h/images/illo048c.png Binary files differdeleted file mode 100644 index 78f6fec..0000000 --- a/old/67166-h/images/illo048c.png +++ /dev/null diff --git a/old/67166-h/images/illo048d.png b/old/67166-h/images/illo048d.png Binary files differdeleted file mode 100644 index b210c9f..0000000 --- a/old/67166-h/images/illo048d.png +++ /dev/null diff --git a/old/67166-h/images/illo048e.jpg b/old/67166-h/images/illo048e.jpg Binary files differdeleted file mode 100644 index 763f0fe..0000000 --- a/old/67166-h/images/illo048e.jpg +++ /dev/null diff --git a/old/67166-h/images/illo050a.png b/old/67166-h/images/illo050a.png Binary files differdeleted file mode 100644 index d26c1cf..0000000 --- a/old/67166-h/images/illo050a.png +++ /dev/null diff --git a/old/67166-h/images/illo050b.png b/old/67166-h/images/illo050b.png Binary files differdeleted file mode 100644 index b464df1..0000000 --- a/old/67166-h/images/illo050b.png +++ /dev/null diff --git a/old/67166-h/images/illo050c.png b/old/67166-h/images/illo050c.png Binary files differdeleted file mode 100644 index 0c736f1..0000000 --- a/old/67166-h/images/illo050c.png +++ /dev/null diff --git a/old/67166-h/images/illo050d.png b/old/67166-h/images/illo050d.png Binary files differdeleted file mode 100644 index b3a2395..0000000 --- a/old/67166-h/images/illo050d.png +++ /dev/null diff --git a/old/67166-h/images/illo050e.png b/old/67166-h/images/illo050e.png Binary files differdeleted file mode 100644 index a38b09d..0000000 --- a/old/67166-h/images/illo050e.png +++ /dev/null diff --git a/old/67166-h/images/illo052.jpg b/old/67166-h/images/illo052.jpg Binary files differdeleted file mode 100644 index a6749a0..0000000 --- a/old/67166-h/images/illo052.jpg +++ /dev/null diff --git a/old/67166-h/images/illo053.png b/old/67166-h/images/illo053.png Binary files differdeleted file mode 100644 index a578f96..0000000 --- a/old/67166-h/images/illo053.png +++ /dev/null diff --git a/old/67166-h/images/illo054.png b/old/67166-h/images/illo054.png Binary files differdeleted file mode 100644 index f2e1c3c..0000000 --- a/old/67166-h/images/illo054.png +++ /dev/null diff --git a/old/67166-h/images/illo057.jpg b/old/67166-h/images/illo057.jpg Binary files differdeleted file mode 100644 index 0ecc4d1..0000000 --- a/old/67166-h/images/illo057.jpg +++ /dev/null diff --git a/old/67166-h/images/illo059.png b/old/67166-h/images/illo059.png Binary files differdeleted file mode 100644 index 8b7650d..0000000 --- a/old/67166-h/images/illo059.png +++ /dev/null diff --git a/old/67166-h/images/illo060.png b/old/67166-h/images/illo060.png Binary files differdeleted file mode 100644 index fc155b3..0000000 --- a/old/67166-h/images/illo060.png +++ /dev/null diff --git a/old/67166-h/images/illo062.png b/old/67166-h/images/illo062.png Binary files differdeleted file mode 100644 index b16e8ed..0000000 --- a/old/67166-h/images/illo062.png +++ /dev/null diff --git a/old/67166-h/images/illo063.png b/old/67166-h/images/illo063.png Binary files differdeleted file mode 100644 index 23223d3..0000000 --- a/old/67166-h/images/illo063.png +++ /dev/null diff --git a/old/67166-h/images/illo064a.png b/old/67166-h/images/illo064a.png Binary files differdeleted file mode 100644 index 537ad08..0000000 --- a/old/67166-h/images/illo064a.png +++ /dev/null diff --git a/old/67166-h/images/illo064b.png b/old/67166-h/images/illo064b.png Binary files differdeleted file mode 100644 index 0380bb0..0000000 --- a/old/67166-h/images/illo064b.png +++ /dev/null diff --git a/old/67166-h/images/illo064c.png b/old/67166-h/images/illo064c.png Binary files differdeleted file mode 100644 index 53e6b46..0000000 --- a/old/67166-h/images/illo064c.png +++ /dev/null diff --git a/old/67166-h/images/illo064d.png b/old/67166-h/images/illo064d.png Binary files differdeleted file mode 100644 index d27c650..0000000 --- a/old/67166-h/images/illo064d.png +++ /dev/null diff --git a/old/67166-h/images/illo064e.png b/old/67166-h/images/illo064e.png Binary files differdeleted file mode 100644 index 2bc6754..0000000 --- a/old/67166-h/images/illo064e.png +++ /dev/null diff --git a/old/67166-h/images/illo064e1.png b/old/67166-h/images/illo064e1.png Binary files differdeleted file mode 100644 index 46f8c64..0000000 --- a/old/67166-h/images/illo064e1.png +++ /dev/null diff --git a/old/67166-h/images/illo066.png b/old/67166-h/images/illo066.png Binary files differdeleted file mode 100644 index ada970f..0000000 --- a/old/67166-h/images/illo066.png +++ /dev/null diff --git a/old/67166-h/images/illo067.png b/old/67166-h/images/illo067.png Binary files differdeleted file mode 100644 index 61e6861..0000000 --- a/old/67166-h/images/illo067.png +++ /dev/null diff --git a/old/67166-h/images/illo068.png b/old/67166-h/images/illo068.png Binary files differdeleted file mode 100644 index f7732f3..0000000 --- a/old/67166-h/images/illo068.png +++ /dev/null diff --git a/old/67166-h/images/illo069a.png b/old/67166-h/images/illo069a.png Binary files differdeleted file mode 100644 index 5db8349..0000000 --- a/old/67166-h/images/illo069a.png +++ /dev/null diff --git a/old/67166-h/images/illo069b.png b/old/67166-h/images/illo069b.png Binary files differdeleted file mode 100644 index 298f75f..0000000 --- a/old/67166-h/images/illo069b.png +++ /dev/null diff --git a/old/67166-h/images/illo070.png b/old/67166-h/images/illo070.png Binary files differdeleted file mode 100644 index 282a415..0000000 --- a/old/67166-h/images/illo070.png +++ /dev/null diff --git a/old/67166-h/images/illo071.png b/old/67166-h/images/illo071.png Binary files differdeleted file mode 100644 index fb869a6..0000000 --- a/old/67166-h/images/illo071.png +++ /dev/null diff --git a/old/67166-h/images/illo072.png b/old/67166-h/images/illo072.png Binary files differdeleted file mode 100644 index a6edd54..0000000 --- a/old/67166-h/images/illo072.png +++ /dev/null diff --git a/old/67166-h/images/illo073.png b/old/67166-h/images/illo073.png Binary files differdeleted file mode 100644 index 209eef7..0000000 --- a/old/67166-h/images/illo073.png +++ /dev/null diff --git a/old/67166-h/images/illo075a.png b/old/67166-h/images/illo075a.png Binary files differdeleted file mode 100644 index e97ca0a..0000000 --- a/old/67166-h/images/illo075a.png +++ /dev/null diff --git a/old/67166-h/images/illo075b.png b/old/67166-h/images/illo075b.png Binary files differdeleted file mode 100644 index f97ea81..0000000 --- a/old/67166-h/images/illo075b.png +++ /dev/null diff --git a/old/67166-h/images/illo075c.png b/old/67166-h/images/illo075c.png Binary files differdeleted file mode 100644 index 46c5fa8..0000000 --- a/old/67166-h/images/illo075c.png +++ /dev/null diff --git a/old/67166-h/images/illo075d.png b/old/67166-h/images/illo075d.png Binary files differdeleted file mode 100644 index c4d30b1..0000000 --- a/old/67166-h/images/illo075d.png +++ /dev/null diff --git a/old/67166-h/images/illo075e.png b/old/67166-h/images/illo075e.png Binary files differdeleted file mode 100644 index 6bc9506..0000000 --- a/old/67166-h/images/illo075e.png +++ /dev/null diff --git a/old/67166-h/images/illo076a.jpg b/old/67166-h/images/illo076a.jpg Binary files differdeleted file mode 100644 index 803aca3..0000000 --- a/old/67166-h/images/illo076a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo076b.jpg b/old/67166-h/images/illo076b.jpg Binary files differdeleted file mode 100644 index a2f181e..0000000 --- a/old/67166-h/images/illo076b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo077.jpg b/old/67166-h/images/illo077.jpg Binary files differdeleted file mode 100644 index 472ac7f..0000000 --- a/old/67166-h/images/illo077.jpg +++ /dev/null diff --git a/old/67166-h/images/illo078.jpg b/old/67166-h/images/illo078.jpg Binary files differdeleted file mode 100644 index 459488b..0000000 --- a/old/67166-h/images/illo078.jpg +++ /dev/null diff --git a/old/67166-h/images/illo079.png b/old/67166-h/images/illo079.png Binary files differdeleted file mode 100644 index fae8374..0000000 --- a/old/67166-h/images/illo079.png +++ /dev/null diff --git a/old/67166-h/images/illo080.png b/old/67166-h/images/illo080.png Binary files differdeleted file mode 100644 index bdb80e7..0000000 --- a/old/67166-h/images/illo080.png +++ /dev/null diff --git a/old/67166-h/images/illo082a.jpg b/old/67166-h/images/illo082a.jpg Binary files differdeleted file mode 100644 index 2316eda..0000000 --- a/old/67166-h/images/illo082a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo082b.jpg b/old/67166-h/images/illo082b.jpg Binary files differdeleted file mode 100644 index 28b7266..0000000 --- a/old/67166-h/images/illo082b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo083a.png b/old/67166-h/images/illo083a.png Binary files differdeleted file mode 100644 index 1318fdb..0000000 --- a/old/67166-h/images/illo083a.png +++ /dev/null diff --git a/old/67166-h/images/illo083b.png b/old/67166-h/images/illo083b.png Binary files differdeleted file mode 100644 index d979411..0000000 --- a/old/67166-h/images/illo083b.png +++ /dev/null diff --git a/old/67166-h/images/illo086a.png b/old/67166-h/images/illo086a.png Binary files differdeleted file mode 100644 index 485f3f5..0000000 --- a/old/67166-h/images/illo086a.png +++ /dev/null diff --git a/old/67166-h/images/illo086b.png b/old/67166-h/images/illo086b.png Binary files differdeleted file mode 100644 index d4af063..0000000 --- a/old/67166-h/images/illo086b.png +++ /dev/null diff --git a/old/67166-h/images/illo087a.png b/old/67166-h/images/illo087a.png Binary files differdeleted file mode 100644 index 1b7fbf7..0000000 --- a/old/67166-h/images/illo087a.png +++ /dev/null diff --git a/old/67166-h/images/illo087b.png b/old/67166-h/images/illo087b.png Binary files differdeleted file mode 100644 index 01e772d..0000000 --- a/old/67166-h/images/illo087b.png +++ /dev/null diff --git a/old/67166-h/images/illo087c.png b/old/67166-h/images/illo087c.png Binary files differdeleted file mode 100644 index 7015962..0000000 --- a/old/67166-h/images/illo087c.png +++ /dev/null diff --git a/old/67166-h/images/illo088a.png b/old/67166-h/images/illo088a.png Binary files differdeleted file mode 100644 index f957e04..0000000 --- a/old/67166-h/images/illo088a.png +++ /dev/null diff --git a/old/67166-h/images/illo088b.png b/old/67166-h/images/illo088b.png Binary files differdeleted file mode 100644 index bc20473..0000000 --- a/old/67166-h/images/illo088b.png +++ /dev/null diff --git a/old/67166-h/images/illo088c.png b/old/67166-h/images/illo088c.png Binary files differdeleted file mode 100644 index cffa4ff..0000000 --- a/old/67166-h/images/illo088c.png +++ /dev/null diff --git a/old/67166-h/images/illo088d.png b/old/67166-h/images/illo088d.png Binary files differdeleted file mode 100644 index 3107b5d..0000000 --- a/old/67166-h/images/illo088d.png +++ /dev/null diff --git a/old/67166-h/images/illo089a.png b/old/67166-h/images/illo089a.png Binary files differdeleted file mode 100644 index a5b191d..0000000 --- a/old/67166-h/images/illo089a.png +++ /dev/null diff --git a/old/67166-h/images/illo089b.png b/old/67166-h/images/illo089b.png Binary files differdeleted file mode 100644 index 0948b4a..0000000 --- a/old/67166-h/images/illo089b.png +++ /dev/null diff --git a/old/67166-h/images/illo089c.png b/old/67166-h/images/illo089c.png Binary files differdeleted file mode 100644 index 85b9c1a..0000000 --- a/old/67166-h/images/illo089c.png +++ /dev/null diff --git a/old/67166-h/images/illo089d.png b/old/67166-h/images/illo089d.png Binary files differdeleted file mode 100644 index a2fd585..0000000 --- a/old/67166-h/images/illo089d.png +++ /dev/null diff --git a/old/67166-h/images/illo090a.png b/old/67166-h/images/illo090a.png Binary files differdeleted file mode 100644 index f0c3203..0000000 --- a/old/67166-h/images/illo090a.png +++ /dev/null diff --git a/old/67166-h/images/illo090b.png b/old/67166-h/images/illo090b.png Binary files differdeleted file mode 100644 index 7b33be6..0000000 --- a/old/67166-h/images/illo090b.png +++ /dev/null diff --git a/old/67166-h/images/illo090c.png b/old/67166-h/images/illo090c.png Binary files differdeleted file mode 100644 index 0ba8142..0000000 --- a/old/67166-h/images/illo090c.png +++ /dev/null diff --git a/old/67166-h/images/illo091a.png b/old/67166-h/images/illo091a.png Binary files differdeleted file mode 100644 index 03814dd..0000000 --- a/old/67166-h/images/illo091a.png +++ /dev/null diff --git a/old/67166-h/images/illo091b.png b/old/67166-h/images/illo091b.png Binary files differdeleted file mode 100644 index c71601e..0000000 --- a/old/67166-h/images/illo091b.png +++ /dev/null diff --git a/old/67166-h/images/illo091c.png b/old/67166-h/images/illo091c.png Binary files differdeleted file mode 100644 index f334275..0000000 --- a/old/67166-h/images/illo091c.png +++ /dev/null diff --git a/old/67166-h/images/illo092a.png b/old/67166-h/images/illo092a.png Binary files differdeleted file mode 100644 index bdc7232..0000000 --- a/old/67166-h/images/illo092a.png +++ /dev/null diff --git a/old/67166-h/images/illo092b.png b/old/67166-h/images/illo092b.png Binary files differdeleted file mode 100644 index 254f075..0000000 --- a/old/67166-h/images/illo092b.png +++ /dev/null diff --git a/old/67166-h/images/illo092c.png b/old/67166-h/images/illo092c.png Binary files differdeleted file mode 100644 index 084f2ca..0000000 --- a/old/67166-h/images/illo092c.png +++ /dev/null diff --git a/old/67166-h/images/illo092d.png b/old/67166-h/images/illo092d.png Binary files differdeleted file mode 100644 index 8383ac2..0000000 --- a/old/67166-h/images/illo092d.png +++ /dev/null diff --git a/old/67166-h/images/illo093a.png b/old/67166-h/images/illo093a.png Binary files differdeleted file mode 100644 index 5b2af27..0000000 --- a/old/67166-h/images/illo093a.png +++ /dev/null diff --git a/old/67166-h/images/illo093b.png b/old/67166-h/images/illo093b.png Binary files differdeleted file mode 100644 index dd37189..0000000 --- a/old/67166-h/images/illo093b.png +++ /dev/null diff --git a/old/67166-h/images/illo093c.png b/old/67166-h/images/illo093c.png Binary files differdeleted file mode 100644 index ce287a2..0000000 --- a/old/67166-h/images/illo093c.png +++ /dev/null diff --git a/old/67166-h/images/illo094a.png b/old/67166-h/images/illo094a.png Binary files differdeleted file mode 100644 index 61d0927..0000000 --- a/old/67166-h/images/illo094a.png +++ /dev/null diff --git a/old/67166-h/images/illo094b.png b/old/67166-h/images/illo094b.png Binary files differdeleted file mode 100644 index cca314b..0000000 --- a/old/67166-h/images/illo094b.png +++ /dev/null diff --git a/old/67166-h/images/illo094c.png b/old/67166-h/images/illo094c.png Binary files differdeleted file mode 100644 index af2772c..0000000 --- a/old/67166-h/images/illo094c.png +++ /dev/null diff --git a/old/67166-h/images/illo095a.png b/old/67166-h/images/illo095a.png Binary files differdeleted file mode 100644 index 8e66ef4..0000000 --- a/old/67166-h/images/illo095a.png +++ /dev/null diff --git a/old/67166-h/images/illo095b.png b/old/67166-h/images/illo095b.png Binary files differdeleted file mode 100644 index 93682c9..0000000 --- a/old/67166-h/images/illo095b.png +++ /dev/null diff --git a/old/67166-h/images/illo095c.png b/old/67166-h/images/illo095c.png Binary files differdeleted file mode 100644 index 30b520b..0000000 --- a/old/67166-h/images/illo095c.png +++ /dev/null diff --git a/old/67166-h/images/illo095d.png b/old/67166-h/images/illo095d.png Binary files differdeleted file mode 100644 index 1cc3d0c..0000000 --- a/old/67166-h/images/illo095d.png +++ /dev/null diff --git a/old/67166-h/images/illo096a.png b/old/67166-h/images/illo096a.png Binary files differdeleted file mode 100644 index 1aebb9c..0000000 --- a/old/67166-h/images/illo096a.png +++ /dev/null diff --git a/old/67166-h/images/illo096b.png b/old/67166-h/images/illo096b.png Binary files differdeleted file mode 100644 index 0635f57..0000000 --- a/old/67166-h/images/illo096b.png +++ /dev/null diff --git a/old/67166-h/images/illo096c.png b/old/67166-h/images/illo096c.png Binary files differdeleted file mode 100644 index 02d0b32..0000000 --- a/old/67166-h/images/illo096c.png +++ /dev/null diff --git a/old/67166-h/images/illo097.png b/old/67166-h/images/illo097.png Binary files differdeleted file mode 100644 index 25dc504..0000000 --- a/old/67166-h/images/illo097.png +++ /dev/null diff --git a/old/67166-h/images/illo099.png b/old/67166-h/images/illo099.png Binary files differdeleted file mode 100644 index 1f6b2e4..0000000 --- a/old/67166-h/images/illo099.png +++ /dev/null diff --git a/old/67166-h/images/illo101.png b/old/67166-h/images/illo101.png Binary files differdeleted file mode 100644 index d1313a1..0000000 --- a/old/67166-h/images/illo101.png +++ /dev/null diff --git a/old/67166-h/images/illo102.png b/old/67166-h/images/illo102.png Binary files differdeleted file mode 100644 index a40abb2..0000000 --- a/old/67166-h/images/illo102.png +++ /dev/null diff --git a/old/67166-h/images/illo104.jpg b/old/67166-h/images/illo104.jpg Binary files differdeleted file mode 100644 index a70154d..0000000 --- a/old/67166-h/images/illo104.jpg +++ /dev/null diff --git a/old/67166-h/images/illo105.jpg b/old/67166-h/images/illo105.jpg Binary files differdeleted file mode 100644 index ab09506..0000000 --- a/old/67166-h/images/illo105.jpg +++ /dev/null diff --git a/old/67166-h/images/illo106.png b/old/67166-h/images/illo106.png Binary files differdeleted file mode 100644 index 51a17b0..0000000 --- a/old/67166-h/images/illo106.png +++ /dev/null diff --git a/old/67166-h/images/illo108.png b/old/67166-h/images/illo108.png Binary files differdeleted file mode 100644 index 47ea58f..0000000 --- a/old/67166-h/images/illo108.png +++ /dev/null diff --git a/old/67166-h/images/illo109.jpg b/old/67166-h/images/illo109.jpg Binary files differdeleted file mode 100644 index 1ccecc8..0000000 --- a/old/67166-h/images/illo109.jpg +++ /dev/null diff --git a/old/67166-h/images/illo110.jpg b/old/67166-h/images/illo110.jpg Binary files differdeleted file mode 100644 index f93dac8..0000000 --- a/old/67166-h/images/illo110.jpg +++ /dev/null diff --git a/old/67166-h/images/illo111a.jpg b/old/67166-h/images/illo111a.jpg Binary files differdeleted file mode 100644 index b6af9fa..0000000 --- a/old/67166-h/images/illo111a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo111b.jpg b/old/67166-h/images/illo111b.jpg Binary files differdeleted file mode 100644 index e2bfc90..0000000 --- a/old/67166-h/images/illo111b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo112a.jpg b/old/67166-h/images/illo112a.jpg Binary files differdeleted file mode 100644 index e691899..0000000 --- a/old/67166-h/images/illo112a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo112b.jpg b/old/67166-h/images/illo112b.jpg Binary files differdeleted file mode 100644 index 1dd353a..0000000 --- a/old/67166-h/images/illo112b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo113.png b/old/67166-h/images/illo113.png Binary files differdeleted file mode 100644 index 94f3407..0000000 --- a/old/67166-h/images/illo113.png +++ /dev/null diff --git a/old/67166-h/images/illo114a.jpg b/old/67166-h/images/illo114a.jpg Binary files differdeleted file mode 100644 index 0288b7b..0000000 --- a/old/67166-h/images/illo114a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo114b.jpg b/old/67166-h/images/illo114b.jpg Binary files differdeleted file mode 100644 index 6c9179a..0000000 --- a/old/67166-h/images/illo114b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo115.jpg b/old/67166-h/images/illo115.jpg Binary files differdeleted file mode 100644 index d89be42..0000000 --- a/old/67166-h/images/illo115.jpg +++ /dev/null diff --git a/old/67166-h/images/illo116.png b/old/67166-h/images/illo116.png Binary files differdeleted file mode 100644 index eca64ce..0000000 --- a/old/67166-h/images/illo116.png +++ /dev/null diff --git a/old/67166-h/images/illo117.png b/old/67166-h/images/illo117.png Binary files differdeleted file mode 100644 index 0f16b45..0000000 --- a/old/67166-h/images/illo117.png +++ /dev/null diff --git a/old/67166-h/images/illo118.jpg b/old/67166-h/images/illo118.jpg Binary files differdeleted file mode 100644 index de844d0..0000000 --- a/old/67166-h/images/illo118.jpg +++ /dev/null diff --git a/old/67166-h/images/illo119.jpg b/old/67166-h/images/illo119.jpg Binary files differdeleted file mode 100644 index 8d1e87b..0000000 --- a/old/67166-h/images/illo119.jpg +++ /dev/null diff --git a/old/67166-h/images/illo120.jpg b/old/67166-h/images/illo120.jpg Binary files differdeleted file mode 100644 index 151d315..0000000 --- a/old/67166-h/images/illo120.jpg +++ /dev/null diff --git a/old/67166-h/images/illo121.jpg b/old/67166-h/images/illo121.jpg Binary files differdeleted file mode 100644 index 053e937..0000000 --- a/old/67166-h/images/illo121.jpg +++ /dev/null diff --git a/old/67166-h/images/illo122.jpg b/old/67166-h/images/illo122.jpg Binary files differdeleted file mode 100644 index 793ef54..0000000 --- a/old/67166-h/images/illo122.jpg +++ /dev/null diff --git a/old/67166-h/images/illo123.jpg b/old/67166-h/images/illo123.jpg Binary files differdeleted file mode 100644 index 81808da..0000000 --- a/old/67166-h/images/illo123.jpg +++ /dev/null diff --git a/old/67166-h/images/illo124.jpg b/old/67166-h/images/illo124.jpg Binary files differdeleted file mode 100644 index 91b8249..0000000 --- a/old/67166-h/images/illo124.jpg +++ /dev/null diff --git a/old/67166-h/images/illo125.jpg b/old/67166-h/images/illo125.jpg Binary files differdeleted file mode 100644 index b97e74d..0000000 --- a/old/67166-h/images/illo125.jpg +++ /dev/null diff --git a/old/67166-h/images/illo127a.jpg b/old/67166-h/images/illo127a.jpg Binary files differdeleted file mode 100644 index 45d1c9c..0000000 --- a/old/67166-h/images/illo127a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo127b.jpg b/old/67166-h/images/illo127b.jpg Binary files differdeleted file mode 100644 index bf9a799..0000000 --- a/old/67166-h/images/illo127b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo128a.jpg b/old/67166-h/images/illo128a.jpg Binary files differdeleted file mode 100644 index 8ff542c..0000000 --- a/old/67166-h/images/illo128a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo128b.jpg b/old/67166-h/images/illo128b.jpg Binary files differdeleted file mode 100644 index e64f466..0000000 --- a/old/67166-h/images/illo128b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo129a.jpg b/old/67166-h/images/illo129a.jpg Binary files differdeleted file mode 100644 index 8f3b8ee..0000000 --- a/old/67166-h/images/illo129a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo129b.jpg b/old/67166-h/images/illo129b.jpg Binary files differdeleted file mode 100644 index 8c04a9a..0000000 --- a/old/67166-h/images/illo129b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo130a.jpg b/old/67166-h/images/illo130a.jpg Binary files differdeleted file mode 100644 index 6af124c..0000000 --- a/old/67166-h/images/illo130a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo130b.jpg b/old/67166-h/images/illo130b.jpg Binary files differdeleted file mode 100644 index e043775..0000000 --- a/old/67166-h/images/illo130b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo131a.jpg b/old/67166-h/images/illo131a.jpg Binary files differdeleted file mode 100644 index 402be64..0000000 --- a/old/67166-h/images/illo131a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo131b.jpg b/old/67166-h/images/illo131b.jpg Binary files differdeleted file mode 100644 index 5d1fe62..0000000 --- a/old/67166-h/images/illo131b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo132a.jpg b/old/67166-h/images/illo132a.jpg Binary files differdeleted file mode 100644 index 58e917d..0000000 --- a/old/67166-h/images/illo132a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo132b.jpg b/old/67166-h/images/illo132b.jpg Binary files differdeleted file mode 100644 index 32b4907..0000000 --- a/old/67166-h/images/illo132b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo132c.jpg b/old/67166-h/images/illo132c.jpg Binary files differdeleted file mode 100644 index c3a63e4..0000000 --- a/old/67166-h/images/illo132c.jpg +++ /dev/null diff --git a/old/67166-h/images/illo134.png b/old/67166-h/images/illo134.png Binary files differdeleted file mode 100644 index 993356a..0000000 --- a/old/67166-h/images/illo134.png +++ /dev/null diff --git a/old/67166-h/images/illo135.png b/old/67166-h/images/illo135.png Binary files differdeleted file mode 100644 index cbda140..0000000 --- a/old/67166-h/images/illo135.png +++ /dev/null diff --git a/old/67166-h/images/illo136.png b/old/67166-h/images/illo136.png Binary files differdeleted file mode 100644 index 822c2c5..0000000 --- a/old/67166-h/images/illo136.png +++ /dev/null diff --git a/old/67166-h/images/illo139.jpg b/old/67166-h/images/illo139.jpg Binary files differdeleted file mode 100644 index 0f5fda7..0000000 --- a/old/67166-h/images/illo139.jpg +++ /dev/null diff --git a/old/67166-h/images/illo143.png b/old/67166-h/images/illo143.png Binary files differdeleted file mode 100644 index d2a263f..0000000 --- a/old/67166-h/images/illo143.png +++ /dev/null diff --git a/old/67166-h/images/illo144a.png b/old/67166-h/images/illo144a.png Binary files differdeleted file mode 100644 index b58f8f5..0000000 --- a/old/67166-h/images/illo144a.png +++ /dev/null diff --git a/old/67166-h/images/illo144b.png b/old/67166-h/images/illo144b.png Binary files differdeleted file mode 100644 index 0654662..0000000 --- a/old/67166-h/images/illo144b.png +++ /dev/null diff --git a/old/67166-h/images/illo145.png b/old/67166-h/images/illo145.png Binary files differdeleted file mode 100644 index cc11132..0000000 --- a/old/67166-h/images/illo145.png +++ /dev/null diff --git a/old/67166-h/images/illo146a.png b/old/67166-h/images/illo146a.png Binary files differdeleted file mode 100644 index ef10ea5..0000000 --- a/old/67166-h/images/illo146a.png +++ /dev/null diff --git a/old/67166-h/images/illo146b.png b/old/67166-h/images/illo146b.png Binary files differdeleted file mode 100644 index 147e997..0000000 --- a/old/67166-h/images/illo146b.png +++ /dev/null diff --git a/old/67166-h/images/illo149a.png b/old/67166-h/images/illo149a.png Binary files differdeleted file mode 100644 index 60faed2..0000000 --- a/old/67166-h/images/illo149a.png +++ /dev/null diff --git a/old/67166-h/images/illo149b.png b/old/67166-h/images/illo149b.png Binary files differdeleted file mode 100644 index 13cc705..0000000 --- a/old/67166-h/images/illo149b.png +++ /dev/null diff --git a/old/67166-h/images/illo149c.png b/old/67166-h/images/illo149c.png Binary files differdeleted file mode 100644 index 2c5c0a5..0000000 --- a/old/67166-h/images/illo149c.png +++ /dev/null diff --git a/old/67166-h/images/illo151.png b/old/67166-h/images/illo151.png Binary files differdeleted file mode 100644 index c8c9f9b..0000000 --- a/old/67166-h/images/illo151.png +++ /dev/null diff --git a/old/67166-h/images/illo153.png b/old/67166-h/images/illo153.png Binary files differdeleted file mode 100644 index 789cf9d..0000000 --- a/old/67166-h/images/illo153.png +++ /dev/null diff --git a/old/67166-h/images/illo154.png b/old/67166-h/images/illo154.png Binary files differdeleted file mode 100644 index 25a21d3..0000000 --- a/old/67166-h/images/illo154.png +++ /dev/null diff --git a/old/67166-h/images/illo155.png b/old/67166-h/images/illo155.png Binary files differdeleted file mode 100644 index de9c448..0000000 --- a/old/67166-h/images/illo155.png +++ /dev/null diff --git a/old/67166-h/images/illo157.png b/old/67166-h/images/illo157.png Binary files differdeleted file mode 100644 index 0caa763..0000000 --- a/old/67166-h/images/illo157.png +++ /dev/null diff --git a/old/67166-h/images/illo158.png b/old/67166-h/images/illo158.png Binary files differdeleted file mode 100644 index b1b0496..0000000 --- a/old/67166-h/images/illo158.png +++ /dev/null diff --git a/old/67166-h/images/illo160.png b/old/67166-h/images/illo160.png Binary files differdeleted file mode 100644 index 7a78866..0000000 --- a/old/67166-h/images/illo160.png +++ /dev/null diff --git a/old/67166-h/images/illo161.png b/old/67166-h/images/illo161.png Binary files differdeleted file mode 100644 index 3f0aa94..0000000 --- a/old/67166-h/images/illo161.png +++ /dev/null diff --git a/old/67166-h/images/illo163.png b/old/67166-h/images/illo163.png Binary files differdeleted file mode 100644 index 961f4bc..0000000 --- a/old/67166-h/images/illo163.png +++ /dev/null diff --git a/old/67166-h/images/illo165.png b/old/67166-h/images/illo165.png Binary files differdeleted file mode 100644 index f27435a..0000000 --- a/old/67166-h/images/illo165.png +++ /dev/null diff --git a/old/67166-h/images/illo166.png b/old/67166-h/images/illo166.png Binary files differdeleted file mode 100644 index 13722a2..0000000 --- a/old/67166-h/images/illo166.png +++ /dev/null diff --git a/old/67166-h/images/illo169.png b/old/67166-h/images/illo169.png Binary files differdeleted file mode 100644 index aa5413d..0000000 --- a/old/67166-h/images/illo169.png +++ /dev/null diff --git a/old/67166-h/images/illo170.png b/old/67166-h/images/illo170.png Binary files differdeleted file mode 100644 index 0ad40fd..0000000 --- a/old/67166-h/images/illo170.png +++ /dev/null diff --git a/old/67166-h/images/illo171.png b/old/67166-h/images/illo171.png Binary files differdeleted file mode 100644 index 06286b4..0000000 --- a/old/67166-h/images/illo171.png +++ /dev/null diff --git a/old/67166-h/images/illo172.png b/old/67166-h/images/illo172.png Binary files differdeleted file mode 100644 index 958868f..0000000 --- a/old/67166-h/images/illo172.png +++ /dev/null diff --git a/old/67166-h/images/illo173.png b/old/67166-h/images/illo173.png Binary files differdeleted file mode 100644 index 0ad50fc..0000000 --- a/old/67166-h/images/illo173.png +++ /dev/null diff --git a/old/67166-h/images/illo175.jpg b/old/67166-h/images/illo175.jpg Binary files differdeleted file mode 100644 index cca8d36..0000000 --- a/old/67166-h/images/illo175.jpg +++ /dev/null diff --git a/old/67166-h/images/illo176a.png b/old/67166-h/images/illo176a.png Binary files differdeleted file mode 100644 index fd491c7..0000000 --- a/old/67166-h/images/illo176a.png +++ /dev/null diff --git a/old/67166-h/images/illo176b.png b/old/67166-h/images/illo176b.png Binary files differdeleted file mode 100644 index 079b9f3..0000000 --- a/old/67166-h/images/illo176b.png +++ /dev/null diff --git a/old/67166-h/images/illo176c.png b/old/67166-h/images/illo176c.png Binary files differdeleted file mode 100644 index 41c568d..0000000 --- a/old/67166-h/images/illo176c.png +++ /dev/null diff --git a/old/67166-h/images/illo176d.png b/old/67166-h/images/illo176d.png Binary files differdeleted file mode 100644 index f89fcbf..0000000 --- a/old/67166-h/images/illo176d.png +++ /dev/null diff --git a/old/67166-h/images/illo177a.png b/old/67166-h/images/illo177a.png Binary files differdeleted file mode 100644 index 7b30e9d..0000000 --- a/old/67166-h/images/illo177a.png +++ /dev/null diff --git a/old/67166-h/images/illo177b.png b/old/67166-h/images/illo177b.png Binary files differdeleted file mode 100644 index 9798325..0000000 --- a/old/67166-h/images/illo177b.png +++ /dev/null diff --git a/old/67166-h/images/illo179.png b/old/67166-h/images/illo179.png Binary files differdeleted file mode 100644 index 47e3c2f..0000000 --- a/old/67166-h/images/illo179.png +++ /dev/null diff --git a/old/67166-h/images/illo180.png b/old/67166-h/images/illo180.png Binary files differdeleted file mode 100644 index 9053715..0000000 --- a/old/67166-h/images/illo180.png +++ /dev/null diff --git a/old/67166-h/images/illo181a.png b/old/67166-h/images/illo181a.png Binary files differdeleted file mode 100644 index 0aa4120..0000000 --- a/old/67166-h/images/illo181a.png +++ /dev/null diff --git a/old/67166-h/images/illo181b.png b/old/67166-h/images/illo181b.png Binary files differdeleted file mode 100644 index ac76ff1..0000000 --- a/old/67166-h/images/illo181b.png +++ /dev/null diff --git a/old/67166-h/images/illo182a.png b/old/67166-h/images/illo182a.png Binary files differdeleted file mode 100644 index 308074b..0000000 --- a/old/67166-h/images/illo182a.png +++ /dev/null diff --git a/old/67166-h/images/illo182b.png b/old/67166-h/images/illo182b.png Binary files differdeleted file mode 100644 index fc0f330..0000000 --- a/old/67166-h/images/illo182b.png +++ /dev/null diff --git a/old/67166-h/images/illo182c.png b/old/67166-h/images/illo182c.png Binary files differdeleted file mode 100644 index d4b2fc5..0000000 --- a/old/67166-h/images/illo182c.png +++ /dev/null diff --git a/old/67166-h/images/illo182d.png b/old/67166-h/images/illo182d.png Binary files differdeleted file mode 100644 index f4adcde..0000000 --- a/old/67166-h/images/illo182d.png +++ /dev/null diff --git a/old/67166-h/images/illo182e.png b/old/67166-h/images/illo182e.png Binary files differdeleted file mode 100644 index b84459a..0000000 --- a/old/67166-h/images/illo182e.png +++ /dev/null diff --git a/old/67166-h/images/illo182f.png b/old/67166-h/images/illo182f.png Binary files differdeleted file mode 100644 index a0153d7..0000000 --- a/old/67166-h/images/illo182f.png +++ /dev/null diff --git a/old/67166-h/images/illo182g.png b/old/67166-h/images/illo182g.png Binary files differdeleted file mode 100644 index e6982cb..0000000 --- a/old/67166-h/images/illo182g.png +++ /dev/null diff --git a/old/67166-h/images/illo182h.png b/old/67166-h/images/illo182h.png Binary files differdeleted file mode 100644 index c22a90a..0000000 --- a/old/67166-h/images/illo182h.png +++ /dev/null diff --git a/old/67166-h/images/illo183a.png b/old/67166-h/images/illo183a.png Binary files differdeleted file mode 100644 index a3a41b0..0000000 --- a/old/67166-h/images/illo183a.png +++ /dev/null diff --git a/old/67166-h/images/illo183b.jpg b/old/67166-h/images/illo183b.jpg Binary files differdeleted file mode 100644 index 1266f17..0000000 --- a/old/67166-h/images/illo183b.jpg +++ /dev/null diff --git a/old/67166-h/images/illo184.png b/old/67166-h/images/illo184.png Binary files differdeleted file mode 100644 index 88d56e4..0000000 --- a/old/67166-h/images/illo184.png +++ /dev/null diff --git a/old/67166-h/images/illo187.jpg b/old/67166-h/images/illo187.jpg Binary files differdeleted file mode 100644 index 16c9765..0000000 --- a/old/67166-h/images/illo187.jpg +++ /dev/null diff --git a/old/67166-h/images/illo189.png b/old/67166-h/images/illo189.png Binary files differdeleted file mode 100644 index e66337e..0000000 --- a/old/67166-h/images/illo189.png +++ /dev/null diff --git a/old/67166-h/images/illo197.png b/old/67166-h/images/illo197.png Binary files differdeleted file mode 100644 index ca644cf..0000000 --- a/old/67166-h/images/illo197.png +++ /dev/null diff --git a/old/67166-h/images/illo198.png b/old/67166-h/images/illo198.png Binary files differdeleted file mode 100644 index f50e749..0000000 --- a/old/67166-h/images/illo198.png +++ /dev/null diff --git a/old/67166-h/images/illo200.png b/old/67166-h/images/illo200.png Binary files differdeleted file mode 100644 index cb63414..0000000 --- a/old/67166-h/images/illo200.png +++ /dev/null diff --git a/old/67166-h/images/illo201.png b/old/67166-h/images/illo201.png Binary files differdeleted file mode 100644 index 3e0d32f..0000000 --- a/old/67166-h/images/illo201.png +++ /dev/null diff --git a/old/67166-h/images/illo202.png b/old/67166-h/images/illo202.png Binary files differdeleted file mode 100644 index e0a644c..0000000 --- a/old/67166-h/images/illo202.png +++ /dev/null diff --git a/old/67166-h/images/illo203.png b/old/67166-h/images/illo203.png Binary files differdeleted file mode 100644 index d9d8633..0000000 --- a/old/67166-h/images/illo203.png +++ /dev/null diff --git a/old/67166-h/images/illo204.png b/old/67166-h/images/illo204.png Binary files differdeleted file mode 100644 index e5081dd..0000000 --- a/old/67166-h/images/illo204.png +++ /dev/null diff --git a/old/67166-h/images/illo205.png b/old/67166-h/images/illo205.png Binary files differdeleted file mode 100644 index 1f53222..0000000 --- a/old/67166-h/images/illo205.png +++ /dev/null diff --git a/old/67166-h/images/illo206.png b/old/67166-h/images/illo206.png Binary files differdeleted file mode 100644 index 20070cd..0000000 --- a/old/67166-h/images/illo206.png +++ /dev/null diff --git a/old/67166-h/images/illo207a.jpg b/old/67166-h/images/illo207a.jpg Binary files differdeleted file mode 100644 index 0902ff5..0000000 --- a/old/67166-h/images/illo207a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo207b.png b/old/67166-h/images/illo207b.png Binary files differdeleted file mode 100644 index 8e4d2a4..0000000 --- a/old/67166-h/images/illo207b.png +++ /dev/null diff --git a/old/67166-h/images/illo208.png b/old/67166-h/images/illo208.png Binary files differdeleted file mode 100644 index 52be734..0000000 --- a/old/67166-h/images/illo208.png +++ /dev/null diff --git a/old/67166-h/images/illo211.png b/old/67166-h/images/illo211.png Binary files differdeleted file mode 100644 index 210c94c..0000000 --- a/old/67166-h/images/illo211.png +++ /dev/null diff --git a/old/67166-h/images/illo212.png b/old/67166-h/images/illo212.png Binary files differdeleted file mode 100644 index aa299b8..0000000 --- a/old/67166-h/images/illo212.png +++ /dev/null diff --git a/old/67166-h/images/illo214.png b/old/67166-h/images/illo214.png Binary files differdeleted file mode 100644 index e0fa207..0000000 --- a/old/67166-h/images/illo214.png +++ /dev/null diff --git a/old/67166-h/images/illo217.png b/old/67166-h/images/illo217.png Binary files differdeleted file mode 100644 index 028bd0c..0000000 --- a/old/67166-h/images/illo217.png +++ /dev/null diff --git a/old/67166-h/images/illo218.png b/old/67166-h/images/illo218.png Binary files differdeleted file mode 100644 index 5b099e5..0000000 --- a/old/67166-h/images/illo218.png +++ /dev/null diff --git a/old/67166-h/images/illo220.png b/old/67166-h/images/illo220.png Binary files differdeleted file mode 100644 index b1b9a87..0000000 --- a/old/67166-h/images/illo220.png +++ /dev/null diff --git a/old/67166-h/images/illo221.png b/old/67166-h/images/illo221.png Binary files differdeleted file mode 100644 index 9a26df5..0000000 --- a/old/67166-h/images/illo221.png +++ /dev/null diff --git a/old/67166-h/images/illo222.png b/old/67166-h/images/illo222.png Binary files differdeleted file mode 100644 index 869989e..0000000 --- a/old/67166-h/images/illo222.png +++ /dev/null diff --git a/old/67166-h/images/illo223.png b/old/67166-h/images/illo223.png Binary files differdeleted file mode 100644 index bd3987c..0000000 --- a/old/67166-h/images/illo223.png +++ /dev/null diff --git a/old/67166-h/images/illo224.png b/old/67166-h/images/illo224.png Binary files differdeleted file mode 100644 index a79fb6f..0000000 --- a/old/67166-h/images/illo224.png +++ /dev/null diff --git a/old/67166-h/images/illo225.png b/old/67166-h/images/illo225.png Binary files differdeleted file mode 100644 index c0d3758..0000000 --- a/old/67166-h/images/illo225.png +++ /dev/null diff --git a/old/67166-h/images/illo226.png b/old/67166-h/images/illo226.png Binary files differdeleted file mode 100644 index 889919f..0000000 --- a/old/67166-h/images/illo226.png +++ /dev/null diff --git a/old/67166-h/images/illo228.png b/old/67166-h/images/illo228.png Binary files differdeleted file mode 100644 index 1c942e5..0000000 --- a/old/67166-h/images/illo228.png +++ /dev/null diff --git a/old/67166-h/images/illo231.png b/old/67166-h/images/illo231.png Binary files differdeleted file mode 100644 index 3c871a9..0000000 --- a/old/67166-h/images/illo231.png +++ /dev/null diff --git a/old/67166-h/images/illo235.png b/old/67166-h/images/illo235.png Binary files differdeleted file mode 100644 index eca14cc..0000000 --- a/old/67166-h/images/illo235.png +++ /dev/null diff --git a/old/67166-h/images/illo237.png b/old/67166-h/images/illo237.png Binary files differdeleted file mode 100644 index 6833c10..0000000 --- a/old/67166-h/images/illo237.png +++ /dev/null diff --git a/old/67166-h/images/illo238.png b/old/67166-h/images/illo238.png Binary files differdeleted file mode 100644 index 72d13dc..0000000 --- a/old/67166-h/images/illo238.png +++ /dev/null diff --git a/old/67166-h/images/illo244.jpg b/old/67166-h/images/illo244.jpg Binary files differdeleted file mode 100644 index 9b6e82c..0000000 --- a/old/67166-h/images/illo244.jpg +++ /dev/null diff --git a/old/67166-h/images/illo245.png b/old/67166-h/images/illo245.png Binary files differdeleted file mode 100644 index 2ddce65..0000000 --- a/old/67166-h/images/illo245.png +++ /dev/null diff --git a/old/67166-h/images/illo246.jpg b/old/67166-h/images/illo246.jpg Binary files differdeleted file mode 100644 index b582531..0000000 --- a/old/67166-h/images/illo246.jpg +++ /dev/null diff --git a/old/67166-h/images/illo248.jpg b/old/67166-h/images/illo248.jpg Binary files differdeleted file mode 100644 index b345e5a..0000000 --- a/old/67166-h/images/illo248.jpg +++ /dev/null diff --git a/old/67166-h/images/illo249.png b/old/67166-h/images/illo249.png Binary files differdeleted file mode 100644 index 3d91fb4..0000000 --- a/old/67166-h/images/illo249.png +++ /dev/null diff --git a/old/67166-h/images/illo250a.png b/old/67166-h/images/illo250a.png Binary files differdeleted file mode 100644 index fa512eb..0000000 --- a/old/67166-h/images/illo250a.png +++ /dev/null diff --git a/old/67166-h/images/illo250b.png b/old/67166-h/images/illo250b.png Binary files differdeleted file mode 100644 index e70e061..0000000 --- a/old/67166-h/images/illo250b.png +++ /dev/null diff --git a/old/67166-h/images/illo251a.jpg b/old/67166-h/images/illo251a.jpg Binary files differdeleted file mode 100644 index afe9154..0000000 --- a/old/67166-h/images/illo251a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo251b.png b/old/67166-h/images/illo251b.png Binary files differdeleted file mode 100644 index 3313fb8..0000000 --- a/old/67166-h/images/illo251b.png +++ /dev/null diff --git a/old/67166-h/images/illo253a.jpg b/old/67166-h/images/illo253a.jpg Binary files differdeleted file mode 100644 index 6c380c4..0000000 --- a/old/67166-h/images/illo253a.jpg +++ /dev/null diff --git a/old/67166-h/images/illo253b.png b/old/67166-h/images/illo253b.png Binary files differdeleted file mode 100644 index 90a6521..0000000 --- a/old/67166-h/images/illo253b.png +++ /dev/null diff --git a/old/67166-h/images/illo255.jpg b/old/67166-h/images/illo255.jpg Binary files differdeleted file mode 100644 index d17036a..0000000 --- a/old/67166-h/images/illo255.jpg +++ /dev/null diff --git a/old/67166-h/images/illo258.png b/old/67166-h/images/illo258.png Binary files differdeleted file mode 100644 index 44ba09a..0000000 --- a/old/67166-h/images/illo258.png +++ /dev/null diff --git a/old/67166-h/images/illo259.png b/old/67166-h/images/illo259.png Binary files differdeleted file mode 100644 index 784067c..0000000 --- a/old/67166-h/images/illo259.png +++ /dev/null diff --git a/old/67166-h/images/illo260a.png b/old/67166-h/images/illo260a.png Binary files differdeleted file mode 100644 index 375bc52..0000000 --- a/old/67166-h/images/illo260a.png +++ /dev/null diff --git a/old/67166-h/images/illo260b.png b/old/67166-h/images/illo260b.png Binary files differdeleted file mode 100644 index 3244573..0000000 --- a/old/67166-h/images/illo260b.png +++ /dev/null diff --git a/old/67166-h/images/illo261.png b/old/67166-h/images/illo261.png Binary files differdeleted file mode 100644 index 3d78fd8..0000000 --- a/old/67166-h/images/illo261.png +++ /dev/null diff --git a/old/67166-h/images/illo262.png b/old/67166-h/images/illo262.png Binary files differdeleted file mode 100644 index 19fd9cb..0000000 --- a/old/67166-h/images/illo262.png +++ /dev/null diff --git a/old/67166-h/images/illo263.png b/old/67166-h/images/illo263.png Binary files differdeleted file mode 100644 index dd8e0ef..0000000 --- a/old/67166-h/images/illo263.png +++ /dev/null diff --git a/old/67166-h/images/illo264.png b/old/67166-h/images/illo264.png Binary files differdeleted file mode 100644 index b0c7507..0000000 --- a/old/67166-h/images/illo264.png +++ /dev/null diff --git a/old/67166-h/images/illo265.png b/old/67166-h/images/illo265.png Binary files differdeleted file mode 100644 index 1664ff1..0000000 --- a/old/67166-h/images/illo265.png +++ /dev/null diff --git a/old/67166-h/images/illo267.png b/old/67166-h/images/illo267.png Binary files differdeleted file mode 100644 index f9847b7..0000000 --- a/old/67166-h/images/illo267.png +++ /dev/null diff --git a/old/67166-h/images/illo268.png b/old/67166-h/images/illo268.png Binary files differdeleted file mode 100644 index fde4e5d..0000000 --- a/old/67166-h/images/illo268.png +++ /dev/null diff --git a/old/67166-h/images/illo280.jpg b/old/67166-h/images/illo280.jpg Binary files differdeleted file mode 100644 index 1a1fed8..0000000 --- a/old/67166-h/images/illo280.jpg +++ /dev/null diff --git a/old/67166-h/images/illo282.jpg b/old/67166-h/images/illo282.jpg Binary files differdeleted file mode 100644 index 53be00b..0000000 --- a/old/67166-h/images/illo282.jpg +++ /dev/null |
