path: root/66078-0.txt

*** START OF THE PROJECT GUTENBERG EBOOK 66078 ***

Transcriber’s notes:

The text of this e-book has mostly been preserved in its original form
including some inconsistency of hyphenation and use of diacritics
(aeriform/aëriform). Three spelling typos have been corrected
(arrangment → arrangement, pully → pulley, dye → die) as have typos
in equations on pages 40 and 43. Some missing punctuation has been
corrected silently (periods, commas, incorrect quotes). Footnotes have
been positioned below the relevant paragraphs.

In this plain text version, italic text is denoted by _underscores_
and bold text by *asterisks*. A caret (^) indicates that the following
character is superscripted, e.g. D^2 (D squared).



                                   A

                        TREATISE ON MECHANICS,

                                  BY

                  CAPTAIN HENRY KATER, V. PRES: R.S.

                              ----and----

               DIONYSIUS LARDNER, D.C.L. F.R.S. &c. &c.

                  A NEW EDITION REVISED & CORRECTED.
                                 1852.

        [Illustration: _H. Corbould del._     _E. Finder fc._]

                                London:
    PRINTED FOR LONGMAN, BROWN, GREEN & LONGMANS. PATERNOSTER ROW:




ADVERTISEMENT.


This Treatise on Mechanics, which was originally published in 1830,
is the work of Dr. Lardner, with the exception of the twenty-first
chapter, which was written by the late Captain Kater. The present
edition has been revised and corrected by Dr. Lardner.

 _London, January, 1852._




CONTENTS.


  CHAP. I.

  PROPERTIES OF MATTER.

  Organs of Sense.--Sensations.--Properties or Qualities.--Observation.
  --Comparison and Generalisation.--Particular and general Qualities.--
  Magnitude.--Size.--Volume.--Lines.--Surfaces.--Edges.--Area.--Length.
  --Impenetrability.--Apparent Penetration.--Figure.--Different from
  Volume.--Atoms.--Molecules.--Matter separable.--Particles.--Force.--
  Cohesion of Atoms.--Hypothetical Phrases unnecessary.--Attraction.     1


  CHAP. II.

  PROPERTIES OF MATTER, CONTINUED.

  Divisibility.--Unlimited Divisibility.--Wollaston’s micrometric
  Wire. --Method of making it.--Thickness of a Soap Bubble.--Wings of
  Insects. --Gilding of Wire for Embroidery.--Globules of the Blood.--
  Animalcules.--Their minute Organisation.--Ultimate Atoms.--Crystals.--
  Porosity.--Volume.--Density.--Quicksilver passing through Pores of
  Wood.--Filtration.--Porosity of Hydrophane.--Compressibility.--
  Elasticity.--Dilatability.--Heat.--Contraction of Metal used to
  restore the Perpendicular to Walls of a Building.--Impenetrability of
  Air.--Compressibility of it.--Elasticity of it.--Liquids not absolutely
  incompressible.--Experiments.--Elasticity of Fluids.-- Aeriform
  Fluids.--Domestic Fire Box.--Evolution of Heat by compressed Air.      9


  CHAP. III.

  INERTIA.

  Inertia.--Matter Incapable of spontaneous Change.--Impediments to
  Motion.--Motion of the Solar System.--Law of Nature.--Language used
  to express Inertia sometimes faulty.--Familiar Examples of Inertia.   27


  CHAP. IV.

  ACTION AND REACTION.

  Inertia in a single Body.--Consequences of Inertia in two or more
  Bodies.--Examples.--Effects of Impact.--Motion not estimated by
  Speed or Velocity alone.--Examples.--Rule for estimating the
  Quantity of Motion.--Action and Reaction.--Examples of.--Velocity
  of two Bodies after Impact.--Rule for finding the common Velocity
  after Impact.--Magnet and Iron.--Feather and Cannon Ball impinging.
  --Newton’s Laws of Motion.--Inutility of.--Familiar Effects
  resulting from Consequences of Inertia.                               34


  CHAP. V.

  COMPOSITION AND RESOLUTION OF FORCE.

  Motion and Pressure.--Force.--Attraction.--Parallelogram of Forces.
  --Resultant.--Components.--Composition of Force.--Resolution of
  Force.--Illustrative Experiments.--Composition of Pressures.--
  Theorems regulating Pressures also regulate Motion.--Examples.--
  Resolution of Motion.--Forces in Equilibrium.--Composition of Motion
  and Pressure.--Illustrations.--Boat in a Current.--Motions of Fishes.
  --Flight of Birds.--Sails of a Vessel.--Tacking.--Equestrian Feats.
  --Absolute and relative Motion.                                       48


  CHAP. VI.

  ATTRACTION.

  Impulse.--Mechanical State of Bodies.--Absolute Rest.--Uniform and
  rectilinear Motion.--Attractions.--Molecular or atomic.--Interstitial
  Spaces in Bodies.--Repulsion and Attraction.--Cohesion.--In Solids
  and Fluids.--Manufacture of Shot.--Capillary Attractions.--Shortening
  of Rope by Moisture.--Suspension of Liquids in capillary Tubes.--
  Capillary Siphon.--Affinity between Quicksilver and Gold.--Examples
  of Affinity.--Sulphuric Acid and Water.--Oxygen and Hydrogen.--Oxygen
  and Quicksilver.--Magnetism.--Electricity and Electro-Magnetism.--
  Gravitation.--Its Law.--Examples of.--Depends on the Mass.--
  Attraction between the Earth and detached Bodies on its Surface.--
  Weight.--Gravitation of the Earth.--Illustrated by Projectiles.--
  Plumb-Line.--Cavendish’s Experiments.                                 63


  CHAP. VII.

  TERRESTRIAL GRAVITY.

  Phenomena of falling Bodies.--Gravity greater at the Poles than
  Equator.--Heavy and light Bodies fall with equal Speed to the Earth.
  --Experiment.--Increased Velocity of falling Bodies.--Principles of
  uniformly accelerated Motion.--Relations between the Height, Time,
  and Velocity.--Attwood’s Machine.--Retarded Motion.                   84


  CHAP. VIII.

  OF THE MOTION OF BODIES ON INCLINED PLANES AND CURVES.

  Force perpendicular to a Plane.--Oblique Force.--Inclined Plane.--
  Weight produces Pressure and Motion.--Motion uniformly accelerated.--
  Space moved through in a given Time.--Increased Elevation produces
  increased Force.--Perpendicular and horizontal Plane.--Final
  Velocity.--Motion down a Curve.--Depends upon Velocity and Curvature.
  --Centrifugal Force.--Circle of Curvature.--Radius of Curvature.--
  Whirling Table.--Experiments.--Solar System.--Examples of centrifugal
  Force.                                                                85


  CHAP. IX.

  THE CENTRE OF GRAVITY.

  Terrestrial Attraction the combined Action of parallel Forces.--
  Single equivalent Force.--Examples.--Method of finding the Centre of
  Gravity.--Line of Direction.--Globe.--Oblate Spheroid.--Prolate
  Spheroid.--Cube.--Straight Wand.--Flat Plate.--Triangular Plate.--
  Centre of Gravity not always within the Body.--A Ring.--Experiments.
  --Stable, instable, and neutral Equilibrium.--Motion and Position of
  the Arms and Feet.--Effect of the Knee-Joint.--Positions of a Dancer.
  --Porter under a Load.--Motion of a Quadruped.--Rope Dancing.--
  Centre of Gravity of two Bodies separated from each other.--
  Mathematical and experimental Examples.--The Conservation of the
  Motion of the Centre of Gravity.--Solar System.--Centre of Gravity
  sometimes called Centre of Inertia.                                  107


  CHAP. X.

  THE MECHANICAL PROPERTIES OF AN AXIS.

  An Axis.--Planets and common spinning Top.--Oscillation or Vibration.
  --Instantaneous and continued Forces.--Percussion.--Continued Force.
  --Rotation.--Impressed Forces.--Properties of a fixed Axis.--Movement
  of the Force round the Axis.--Leverage of the Force.--Impulse
  perpendicular to, but not crossing, the Axis.--Radius of Gyration.--
  Centre of Gyration.--Moment of Inertia.--Principal Axes.--Centre of
  Percussion.                                                          128


  CHAP. XI.

  OF THE PENDULUM.

  Isochronism.--Experiments.--Simple Pendulum.--Examples illustrative
  of.--Length of.--Experiments of Kater, Biot, Sabine, and others.--
  Huygens’ Cycloidal Pendulum.                                         145


  CHAP. XII.

  OF SIMPLE MACHINES.

  Statics.--Dynamics.--Force.--Power.--Weight.--Lever.--Cord.--
  Inclined Plane.                                                      160


  CHAP. XIII.

  OF THE LEVER.

  Arms.--Fulcrum.--Three Kinds of Levers.--Crow Bar.--Handspike.--Oar.
  --Nutcrackers.--Turning Lathe.--Steelyard.--Rectangular Lever.--
  Hammer.--Load between two Bearers.--Combination of Levers.--
  Equivalent Lever.                                                    167


  CHAP. XIV.

  OF WHEEL-WORK.

  Wheel and Axle.--Thickness of the Rope.--Ways of applying the Power.
  --Projecting Pins.--Windlass.--Winch.--Axle.--Horizontal Wheel.--
  Tread-Mill.--Cranes.--Water-Wheels.--Paddle-Wheel.--Rachet-Wheel.--
  Rack.--Spring of a Watch.--Fusee.--Straps or Cords.--Examples of.--
  Turning Lathe.--Revolving Shafts.--Spinning Machinery.--Saw-Mill.--
  Pinion.--Leaves.--Crane.--Spur-Wheels.--Crown-Wheels.--Bevelled
  Wheels.--Hunting-Cog.--Chronometers.--Hair-Spring.--Balance-Wheel.   178


  CHAP. XV.

  OF THE PULLEY.

  Cord.--Sheave.--Fixed Pulley.--Fire Escapes.--Single moveable
  Pulley.--Systems of Pulleys.--Smeaton’s Tackle.--White’s Pulley.--
  Advantage of.--Runner.--Spanish Bartons.                             199


  CHAP. XVI.

  ON THE INCLINED PLANE, WEDGE, AND SCREW.

  Inclined Plane.--Effect of a Weight on.--Power of.--Roads.--Power
  Oblique to the Plane.--Plane sometimes moves under the Weight.--
  Wedge.--Sometimes formed of two inclined Planes.--More powerful
  as its Angle is acute.--Where used.--Limits to the Angle.--Screw.
  --Hunter’s Screw.--Examples.--Micrometer Screw.                      209


  CHAP. XVII.

  ON THE REGULATION AND ACCUMULATION OF FORCE.

  Uniformity of Operation.--Irregularity of prime Mover.--Water-Mill.
  --Wind-Mill.--Steam Pressure.--Animal Power.--Spring.--Regulators.
  --Steam-Engine.--Governor.--Self-acting Damper.--Tachometer.--
  Accumulation of Power.--Examples.--Hammer.--Flail.--Bow-string.--
  Fire Arms.--Air-Gun.--Steam-Gun.--Inert Matter a Magazine for
  Force.--Fly-Wheel.--Condensed Air.--Rolling Metal.--Coining-Press.   224


  CHAP. XVIII.

  MECHANICAL CONTRIVANCES FOR MODIFYING MOTION.

  Division of Motion into rectilinear and rotatory.--Continued and
  reciprocating.--Examples.--Flowing Water.--Wind.--Animal Motion.--
  Falling of a Body.--Syringe-Pump.--Hammer.--Steam-Engine.--Fulling
  Mill.--Rose-Engine.--Apparatus of Zureda.--Leupold’s Application
  of it.--Hooke’s universal Joint.--Circular and alternate Motion.--
  Examples.--Watt’s Methods of connecting the Motion of the Piston
  with that of the Beam.--Parallel Motion.                             245


  CHAP. XIX.

  OF FRICTION AND THE RIGIDITY OF CORDAGE.

  Friction and Rigidity.--Laws of Friction.--Rigidity of Cordage.--
  Strength of Materials.--Resistance from Friction.--Independent of
  the Magnitude of Surfaces.--Examples.--Vince’s Experiments.--Effect
  of Velocity.--Means for diminishing Friction.--Friction Wheels.--
  Angle of Repose.--Best Angle of Draught.--Rail-Roads.--Stiffness
  of Ropes.                                                            260


  CHAP. XX.

  ON THE STRENGTH OF MATERIALS.

  Difficulty of determining the Laws which govern the Strength of
  Materials.--Forces tending to separate the Parts of a Solid.--Laws
  by   which Solids resist Compression.--Euler’s theory.--Transverse
  Strength of Solids.--Strength diminished by the Increase of Height.
  --Lateral or   Transverse Strain.--Limits of Magnitude.--Relative
  Strength of small Animals greater than large ones.                   272


  CHAP. XXI.

  ON BALANCES AND PENDULUMS.

  Weight.--Time.--The Balance.--Fulcrum.--Centre of Gravity of.--
  Sensibility of.--Positions of the Fulcrum.--Beam variously
  constructed.--Troughton’s Balance.--Robinson’s Balance.--Kater’s
  Balance.--Method of adjusting a Balance.--Use of it.--Precautions
  necessary.--Of Weights.--Adjustment of.--Dr. Black’s Balance.--
  Steelyard.--Roman Statera or Steelyard.--Convenience of.--C. Paul’s
  Steelyard.--Chinese Steelyard.--Danish Balance.--Bent Lever Balance.
  --Brady’s Balance.--Weighing Machine for Turnpike Roads.--Instruments
  for Weighing by means of a Spring.--Spring Steelyard.--Salter’s
  Spring Balance.--Marriott’s Dial Weighing Machine.--Dynamometer.--
  Compensation Pendulums.--Barton’s Gridiron Pendulum.--Table of linear
  Expansion.--Second Table.--Harrison’s Pendulum.--Troughton’s
  Pendulum.--Benzenberg’s Pendulum.--Ward’s Compensation Pendulum.--
  Compensation Tube of Julien le Roy.--Deparcieux’s Compensation.--
  Kater’s Pendulum.--Reed’s Pendulum.--Ellicott’s Pendulum.--Mercurial
  Pendulum.--Graham’s Pendulum.--Compensation Pendulum of Wood and
  Lead.--Smeaton’s Pendulum.--Brown’s Mode of Adjustment.              278




THE

ELEMENTS OF MECHANICS.




CHAP. I.

PROPERTIES OF MATTER--MAGNITUDE--IMPENETRABILITY--FIGURE--FORCE.


(1.) Placed in the material world, Man is continually exposed to the
action of an infinite variety of objects by which he is surrounded. The
body, to which the thinking and living principles have been united,
is an apparatus exquisitely contrived to receive and to transmit
impressions. Its various parts are organised with obvious reference to
the several external agents by which it is to be effected. Each organ
is designed to convey to the mind immediate notice of some peculiar
action, and is accordingly endued with a corresponding susceptibility.
This adaptation of such organs to the particular influences of
material agents, is rendered still more conspicuous when we consider
that, however delicate its structure, each organ is wholly insensible
to every influence except that to which it appears to be specially
appropriated. The eye, so intensely susceptible of impressions from
light, is not at all affected by those of sound; while the fine
mechanism of the ear, so sensitively alive to every effect of the
latter class, is altogether insensible to the former. The splendour of
excessive light may occasion blindness, and deafness may result from
the roar of a cannonade; but neither the sight nor the hearing can be
injured by the most extreme action of that principle which is designed
to affect the other.

Thus the organs of sense are instruments by which the mind is enabled
to determine the existence and the qualities of external things. The
effects which these objects produce upon the mind through the organs,
are called _sensations_, and these sensations are the immediate
elements of all human knowledge. MATTER is the general name which
has been given to that substance, which, under forms infinitely
various, affects the senses. Metaphysicians have differed in defining
this principle. Some have even doubted of its existence. But these
discussions are beyond the sphere of mechanical philosophy, the
conclusions of which are in nowise affected by them. Our investigations
here relate, not to matter as an abstract existence, but to those
qualities which we discover in it by the senses, and of the existence
of which we are sure, however the question as to matter itself may be
decided. When we speak of “bodies,” we mean those things, whatever they
be, which excite in our minds certain sensations; and the powers to
excite those sensations are called “properties,” or “qualities.”

(2.) To ascertain by observation the properties of bodies, is the
first step towards obtaining a knowledge of nature. Hence man becomes
a natural philosopher the moment he begins to feel and to perceive.
The first stage of life is a state of constant and curious excitement.
Observation and attention, ever awake, are engaged upon a succession
of objects new and wonderful. The large repository of the memory is
opened, and every hour pours into it unbounded stores of natural facts
and appearances, the rich materials of future knowledge. The keen
appetite for discovery implanted in the mind for the highest ends,
continually stimulated by the presence of what is novel, renders torpid
every other faculty, and the powers of reflection and comparison are
lost in the incessant activity and unexhausted vigour of observation.
After a season, however, the more ordinary classes of phenomena cease
to excite by their novelty. Attention is drawn from the discovery of
what is new, to the examination of what is familiar. From the external
world the mind turns in upon itself, and the feverish astonishment
of childhood gives place to the more calm contemplation of incipient
maturity. The vast and heterogeneous mass of phenomena collected by
past experience is brought under review. The great work of comparison
begins. Memory produces her stores, and reason arranges them. Then
succeed those first attempts at generalisation which mark the dawn of
science in the mind.

To compare, to classify, to generalise, seem to be instinctive
propensities peculiar to man. They separate him from inferior animals
by a wide chasm. It is to these powers that all the higher mental
attributes may be traced, and it is from their right application that
all progress in science must arise. Without these powers, the phenomena
of nature would continue a confused heap of crude facts, with which the
memory might be loaded, but from which the intellect would derive no
advantage. Comparison and generalisation are the great digestive organs
of the mind, by which only nutrition can be extracted from this mass of
intellectual food, and without which, observation the most extensive,
and attention the most unremitting, can be productive of no real or
useful advancement in knowledge.

(3.) Upon reviewing those properties of bodies which the senses
most frequently present to us, we observe that very few of them are
essential to, and inseparable from, matter. The greater number may be
called _particular_ or _peculiar qualities_, being found in some bodies
but not in others. Thus the property of attracting iron is peculiar to
the loadstone, and not observable in other substances. One body excites
the sensation of green, another of red, and a third is deprived of all
colour. A few characteristic and essential qualities are, however,
inseparable from matter in whatever state, or under whatever form it
exist. Such properties alone can be considered as tests of materiality.
Where their presence is neither manifest to sense, nor demonstrable by
reason, _there_ matter is not. The principal of these qualities are
_magnitude_ and _impenetrability_.

(4.) _Magnitude._--Every body occupies space, that is, it has
magnitude. This is a property observable by the senses in all bodies
which are not so minute as to elude them, and which the understanding
can trace to the smallest particle of matter. It is impossible, by any
stretch of imagination, even to conceive a portion of matter so minute
as to have no magnitude.

The _quantity_ of space which a body occupies is sometimes called its
_magnitude_. In colloquial phraseology, the word _size_ is used to
express this notion; but the most correct term, and that which we shall
generally adopt is _volume_. Thus we say, the volume of the earth is so
many cubic miles, the volume of this room is so many cubic feet.

The external limits of the magnitude of a body are _lines_ and
_surfaces_, lines being the limits which separate the several surfaces
of the same body. The linear limits of a body are also called _edges_.
Thus the line which separates the top of a chest from one of its sides
is called an edge.

The _quantity_ of a surface is called its _area_, and the _quantity_
of a line is called its _length_. Thus we say, the _area_ of a field
is so many acres, the _length_ of a rope is so many yards. The word
“magnitude” is, however, often used indifferently for volume, area,
and length. If the objects of investigation were of a more complex
and subtle character, as in metaphysics, this unsteady application of
terms might be productive of confusion, and even of error; but in this
science the meaning of the term is evident, from the way in which it is
applied, and no inconvenience is found to arise.

(5.) _Impenetrability._--This property will be most clearly explained
by defining the positive quality from which it takes its name, and
of which it merely signifies the absence. A substance would be
_penetrable_ if it were such as to allow another to pass through the
space which it occupies, without disturbing its component parts. Thus,
if a comet striking the earth could enter it at one side, and, passing
through it, emerge from the other without separating or deranging any
bodies on or within the earth, then the earth would be penetrable by
the comet. When bodies are said to be impenetrable, it is therefore
meant that one cannot pass through another without displacing some or
all of the component parts of that other. There are many instances of
apparent penetration; but in all these, the parts of the body which
seem to be penetrated are displaced. Thus, if the point of a needle be
plunged in a vessel of water, all the water which previously filled the
space into which the needle enters will be displaced, and the level of
the water will rise in the vessel to the same height as it would by
pouring in so much more water as would fill the space occupied by the
needle.

(6.) _Figure._--If the hand be placed upon a solid body, we become
sensible of its impenetrability, by the obstruction which it opposes to
the entrance of the hand within its dimensions. We are also sensible
that this obstruction commences at certain places; that it has certain
determinate limits; that these limitations are placed in certain
directions relatively to each other. The mutual relation which is found
to subsist between these boundaries of a body, gives us the notion of
its _figure_. The _figure_ and _volume_ of a body should be carefully
distinguished. Each is entirely independent of the other. Bodies having
very different _volumes_ may have the same _figure_; and in like manner
bodies differing in _figure_ may have the same _volume_. The figure of
a body is what in popular language is called its _shape_ or _form_. The
volume of a body is that which is commonly called its _size_. It will
hence be easily understood, that one body (a globe, for example) may
have ten times the volume of another (globe), and yet have the same
figure; and that two bodies (as a die and a globe) may have _figures_
altogether different, and yet have equal _volumes_. What we have here
observed of volumes will also be applicable to lengths and areas. The
arc of a circle and a straight line may have the same length, although
they have different figures; and, on the other hand, two arcs of
different circles may have the same figure, but very unequal lengths.
The surface of a ball is curved, that of the table plane; and yet the
_area_ of the surface of the ball may be equal to that of the table.

(7.) _Atoms--Molecules._--Impenetrability must not be confounded
with inseparability. Every body which has been brought under human
observation is separable into parts; and these parts, however small,
are separable into others, still more minute. To this process of
division no practical limit has ever been found. Nevertheless, many
of the phenomena which the researches of those who have successfully
examined the laws of nature have developed, render it highly probable
that all bodies are composed of elementary parts which are indivisible
and unalterable. The component parts, which may be called _atoms_, are
so minute, as altogether to elude the senses, even when aided by the
most powerful scientific instruments. The word _molecule_ is often used
to signify component parts of a body so small as to escape sensible
observation, but not ultimate atoms, each molecule being supposed to
be formed of several atoms, arranged according to some determinate
figure. _Particle_ is used also to express small component parts, but
more generally is applied to those which are not too minute to be
discoverable by observation.

(8.) _Force._--If the particles of matter were endued with no property
in relation to one another, except their mutual impenetrability, the
universe would be like a mass of sand, without variety of state or
form. Atoms, when placed in juxtaposition, would neither cohere, as in
solid bodies, nor repel each other, as in aeriform substances. On the
contrary, we find that in some cases the atoms which compose bodies
are not simply placed together, but a certain effect is manifested in
their strong coherence. If they were merely placed in juxtaposition,
their separation would be effected as easily as any one of them could
be removed from one place to another. Take a piece of iron, and
attempt to separate its parts: the effort will be strongly resisted,
and it will be a matter of much greater facility to move the whole
mass. It appears, therefore, that in such cases the parts which are in
juxtaposition _cohere_ and resist their mutual separation. This effect
is denominated _force_; and the constituent atoms are said to cohere
with a greater or less degree of force, according as they oppose a
greater or less resistance to their mutual separation.

The coherence of particles in juxtaposition is an effect of the same
class as the mutual approach of particles placed at a distance from
each other. It is not difficult to perceive that the same influence
which causes the bodies A and B to approach each other, when placed at
some distance asunder, will, when they unite, retain them together,
and oppose a resistance to their separation. Hence this effect of
the mutual approximation of bodies towards each other is also called
_force_.

Force is generally defined to be “whatever produces or opposes the
production of motion in matter.” In this sense, it is a name for
the unknown cause of a known effect. It would, however, be more
philosophical to give the name, not to the _cause_, of which we are
ignorant, but to the _effect_, of which we have sensible evidence.
To observe and to classify is the whole business of the natural
philosopher. When _causes_ are referred to, it is implied, that effects
of the same class arise from the agency of the same cause. However
probable this assumption may be, it is altogether unnecessary. All
the objects of science, the enlargement of mind, the extension and
improvement of knowledge, the facility of its acquisition, are obtained
by generalisation alone, and no good can arise from tainting our
conclusions with the possible errors of hypotheses.

It may be here, once for all, observed, that the phraseology of
causation and hypotheses has become so interwoven with the language
of science, that it is impossible to avoid the frequent use of it.
Thus, we say, “the magnet _attracts_ iron;” the expression _attract_
intimating the cause of the observed effect. In such cases, however,
we must be understood to mean the _effect itself_, finding it less
inconvenient to continue the use of the received phrases, modifying
their signification, than to introduce new ones.

Force, when manifested by the mutual approach or cohesion of bodies, is
also called _attraction_, and it is variously denominated, according to
the circumstances under which it is observed to act. Thus, the force
which holds together the atoms of solid bodies is called _cohesive
attraction_. The force which draws bodies to the surface of the earth,
when placed above it, is called the _attraction of gravitation_. The
force which is exhibited by the mutual approach, or adhesion, of the
loadstone and iron, is called _magnetic attraction_, and so on.

When force is manifested by the motion of bodies from each other, it
is called _repulsion_. Thus, if a piece of glass, having been briskly
rubbed with a silk handkerchief, touch successively two feathers, these
feathers, if brought near each other, will move asunder. This effect is
called _repulsion_, and the feathers are said to _repel_ each other.

(9.) The influence which forces have upon the form, state, arrangement,
and motions of material substances is the principal object of physical
science. In its strict sense, MECHANICS is a term of very extensive
signification. According to the more popular usage, however, it has
been generally applied to that part of physical science which includes
the investigation of the phenomena of motion and rest, pressure and
other effects developed by the mutual action of solid masses. The
consideration of similar phenomena, exhibited in bodies of the liquid
form, is consigned to HYDROSTATICS, and that of aeriform fluids to
PNEUMATICS.




CHAP. II.

DIVISIBILITY--POROSITY--DENSITY--COMPRESSIBILITY--ELASTICITY--DILATABILITY.


(10.) Besides the qualities of magnitude and impenetrability, there are
several other general properties of bodies contemplated in mechanical
philosophy, and to which we shall have frequent occasion to refer.
Those which we shall notice in the present chapter are,

  1. Divisibility.
  2. Porosity--Density.
  3. Compressibility--Elasticity.
  4. Dilatability.

(11.) _Divisibility._--Observation and experience prove that all bodies
of sensible magnitude, even the most solid, consist of parts which are
separable. To the practical subdivision of matter there seems to be no
assignable limit. Numerous examples of the division of matter, to a
degree almost exceeding belief, may be found in experimental enquiries
instituted in physical science; the useful arts furnish many instances
not less striking; but, perhaps, the most conspicuous proofs which can
be produced, of the extreme minuteness of which the parts of matter
are susceptible, arise from the consideration of certain parts of the
organised world.

(12.) The relative places of stars in the heavens, as seen in the
field of view of a telescope, are marked by fine lines of wire placed
before the eye-glass, and which cross each other at right angles. The
stars appearing in the telescope as mere lucid points without sensible
magnitude, it is necessary that the wires which mark their places
should have a corresponding tenuity. But these wires being magnified
by the eye-glass would have an apparent thickness, which would render
them inapplicable to this purpose, unless their real dimensions were of
a most uncommon degree of minuteness. To obtain wire for this purpose,
Dr. Wollaston invented the following process:--A piece of fine
platinum wire, _a b_, is extended along the axis of a cylindrical
mould, A B, _fig. 1._ Into this mould, at A, molten silver
is poured. Since the heat necessary for the fusion of platinum is much
greater than that which retains silver in the liquid form, the wire
_a b_ remains solid, while the mould A B is filled with
the silver. When the metal has become solid by being cooled, and has
been removed from the mould, a cylindrical bar of silver is obtained,
having a platinum wire in its axis. This bar is then wire-drawn, by
forcing it successively through holes C, D, E, F, G, H, diminishing
in magnitude, the first hole being a little less than the wire at
the beginning of the process. By these means the platinum _a b_
is wire-drawn at the same time and in the same proportion with the
silver, so that whatever be the original proportion of the thickness
of the wire _a b_ to that of the mould A B, the same will
be the proportion of the platinum wire to the whole at the several
thicknesses C, D, &c. If we suppose the mould A B to be ten times
the thickness of the wire _a b_, then the silver wire, throughout
the whole process, will be ten times the thickness of the platinum
wire which it includes within it. The silver wire may be drawn to a
thickness not exceeding the 300th of an inch. The platinum will thus
not exceed the 3000th of an inch. The wire is then dipped in nitric
acid, which dissolves the silver, but leaves the platinum solid. By
this method Dr. Wollaston succeeded in obtaining wire, the diameter of
which did not exceed the 18000th of an inch. A quantity of this wire,
equal in bulk to a common die used in games of chance, would extend
from Paris to Rome.

(13.) Newton succeeded in determining the thickness of very thin laminæ
of transparent substances by observing the colours which they reflect.
A soap bubble is a thin shell of water, and is observed to reflect
different colours from different parts of its surface. Immediately
before the bubble bursts, a black spot may be observed near the top. At
this part the thickness has been proved not to exceed the 2,500,000th
of an inch.

The transparent wings of certain insects are so attenuated in their
structure that 50,000 of them placed over each other would not form a
pile a quarter of an inch in height.

(14.) In the manufacture of embroidery it is necessary to obtain very
fine gilt silver threads. To accomplish this, a cylindrical bar of
silver, weighing 360 ounces, is covered with about two ounces of gold.
This gilt bar is then wire-drawn, as in the first example, until it
is reduced to a thread so fine that 3400 feet of it weigh less than
an ounce. The wire is then flattened by passing it between rollers
under a severe pressure, a process which increases its length, so that
about 4000 feet shall weigh one ounce. Hence, one foot will weigh the
4000th part of an ounce. The proportion of the gold to the silver in
the original bar was that of 2 to 360, or 1 to 180. Since the same
proportion is preserved after the bar has been wire-drawn, it follows
that the quantity of gold which covers one foot of the fine wire is the
180th part of the 4000th of an ounce; that is the 720,000th part of an
ounce.

The quantity of gold which covers one inch of this wire will be twelve
times less than that which covers one foot. Hence, this quantity will
be the 8,640,000th part of an ounce. If this inch be again divided
into 100 equal parts, every part will be distinctly visible without
the aid of microscopes. The gold which covers this small but visible
portion is the 864,000,000th part of an ounce. But we may proceed even
further; this portion of the wire may be viewed by a microscope which
magnifies 500 times, so that the 500th part of it will thus become
visible. In this manner, therefore, an ounce of gold may be divided
into 432,000,000,000 visible parts, each of which will possess all the
characters and qualities found in the largest masses of the metal.
It will retain its solidity, texture, and colour; it will resist the
same agents, and enter into combination with the same substances. If
the gilt wire be dipped in nitric acid, the silver within the coating
will be dissolved, but the hollow tube of gold which surrounded it will
still cohere and remain suspended.

(15.) The organised world offers still more remarkable examples of the
inconceivable subtilty of matter.

The blood which flows in the veins of animals is not, as it seems,
an uniformly red liquid. It consists of flat discs of a red colour,
floating in a transparent fluid called _serum_. In different species
these discs differ both in figure and in magnitude. In man and all
animals which suckle their young, they are perfectly circular or nearly
so. In birds, reptiles, and fishes, they are of oval form. In the human
species, the diameter of these discs is about the 3500th of an inch.
Hence it follows, that in a drop of blood which would remain suspended
from the point of a fine needle, there must be about 3,000,000 of such
discs.

Small as these discs are, the animal kingdom presents beings whose
whole bodies are still more minute. Animalcules have been discovered,
whose magnitude is such, that a million of them do not exceed the
bulk of a grain of sand; and yet each of these creatures is composed
of members as curiously organised as those of the largest species;
they have life and spontaneous motion, and are endued with sense and
instinct. In the liquids in which they live, they are observed to
move with astonishing speed and activity; nor are their motions blind
and fortuitous, but evidently governed by choice, and directed to an
end. They use food and drink, from which they derive nutrition, and
are therefore furnished with a digestive apparatus. They have great
muscular power, and are furnished with limbs and muscles of strength
and flexibility. They are susceptible of the same appetites, and
obnoxious to the same passions, the gratification of which is attended
with the same results as in our own species. Spallanzani observes, that
certain animalcules devour others so voraciously, that they fatten and
become indolent and sluggish by over-feeding. After a meal of this
kind, if they be confined in distilled water, so as to be deprived of
all food, their condition becomes reduced; they regain their spirit
and activity, and amuse themselves in the pursuit of the more minute
animals, which are supplied to them; they swallow these without
depriving them of life, for, by the aid of the microscope, the one
has been observed moving within the body of the other. These singular
appearances are not matters of idle and curious observation. They lead
us to enquire what parts are necessary to produce such results. Must we
not conclude that these creatures have heart, arteries, veins, muscles,
sinews, tendons, nerves, circulating fluids, and all the concomitant
apparatus of a living organised body? And if so, how inconceivably
minute must those parts be! If a globule of their blood bears the same
proportion to their whole bulk as a globule of our blood bears to our
magnitude, what powers of calculation can give an adequate notion of
its minuteness?

(16.) These and many other phenomena observed in the immediate
productions of nature, or developed by mechanical and chemical
processes, prove that the materials of which bodies are formed are
susceptible of minuteness which infinitely exceeds the powers of
sensible observation, even when those powers have been extended by all
the aids of science. Shall we then conclude that matter is infinitely
divisible, and that there are no original constituent atoms of
determinate magnitude and figure at which all subdivision must cease?
Such an inference would be unwarranted, even had we no other means of
judging the question, except those of direct observation; for it would
be imposing that limit on the works of nature which she has placed
upon our powers of observing them. Aided by reason, however, and a due
consideration of certain phenomena which come within our immediate
powers of observation, we are frequently able to determine other
phenomena which are beyond those powers. The diurnal motion of the
earth is not perceived by us, because all things around us participate
in it, preserve their relative position, and appear to be at rest. But
reason tells us that such a motion must produce the alternations of
day and night, and the rising and setting of all the heavenly bodies;
appearances which are plainly observable, and which betray the cause
from which they arise. Again, we cannot place ourselves at a distance
from the earth, and behold the axis on which it revolves, and observe
its peculiar obliquity to the orbit in which the earth moves; but we
see and feel the vicissitudes of the seasons, an effect which is the
immediate consequence of that inclination, and by which we are able to
detect it.

(17.) So it is in the present case. Although we are unable by direct
observation to prove the existence of constituent material atoms of
determinate figure, yet there are many observable phenomena which
render their existence in the highest degree probable, if not morally
certain. The most remarkable of this class of effects is observed in
the crystallisation of salts. When salt is dissolved in a sufficient
quantity of pure water, it mixes with the water in such a manner as
wholly to disappear to the sight and touch, the mixture being one
uniform transparent liquid like the water itself, before its union
with the salt. The presence of the salt in the water may, however, be
ascertained by weighing the mixture, which will be found to exceed
the original weight of the water by the exact amount of the weight
of the salt. It is a well-known fact, that a certain degree of heat
will convert water into vapour, and that the same degree of heat does
not produce the same effect upon salt. The mixture of salt and water
being exposed to this temperature, the water will gradually evaporate,
disengaging itself from the salt with which it has been combined. When
so much of the water has evaporated, that what remains is insufficient
to keep in solution the whole of the salt, a part of the latter thus
disengaged from the water will return to the solid state. The saline
constituent will not in this case collect in irregular solid molecules;
but will exhibit itself in particles of regular figure, terminated by
plane surfaces, the figure being always the same for the same species
of salt, but different for different species. These particles are
called _crystals_. There are several circumstances in the formation of
these _crystals_ which merit attention.

If one of them be detached from the others, and the progress of its
formation observed, it will be found gradually to increase, always
preserving its original figure. Since its increase must be caused
by the continued accession of saline molecules, disengaged by the
evaporation of the water, it follows that these molecules must be so
formed, that by attaching themselves successively to the crystal, they
maintain the regularity of its bounding planes, and preserve their
mutual inclinations unvaried.

Suppose a crystal to be taken from the liquid during the process of
crystallisation, and a piece broken from it so as to destroy the
regularity of its form: if the crystal thus broken be restored to the
liquid, it will be observed gradually to resume its regular form, the
atoms of salt successively dismissed by the vaporising water filling
up the irregular cavities produced by the fracture. Hence it follows,
that the saline particles which compose the surface of the crystal,
and those which form the interior of its mass, are similar, and exert
similar attractions on the atoms disengaged by the water.

All these details of the process of crystallisation are very evident
indications of a determinate figure in the ultimate atoms of the
substances which are crystallised. But besides the substances which are
thus reduced by art to the form of crystals, there are larger classes
which naturally exist in that state. There are certain planes, called
_planes of cleavage_, in the directions of which natural crystals are
easily divided. These planes, in substances of the same kind, always
have the same relative position, but differ in different substances.
The surfaces of the planes of cleavage are quite invisible before the
crystal is divided; but when the parts are separated, these surfaces
exhibit a most intense polish, which no effort of art can equal.

We may conceive crystallised substances to be regular mechanical
structures formed of atoms of a certain figure, on which the figure of
the whole structure must depend. The planes of cleavage are parallel to
the sides of the constituent atoms; and their directions, therefore,
form so many conditions for the determination of their figure. The
shape of the atoms being thus determined, it is not difficult to assign
all the various ways in which they may be arranged, so as to produce
figures which are accordingly found to correspond with the various
forms of crystals of the same substance.

(18.) When these phenomena are duly considered and compared, little
doubt can remain that all substances susceptible of crystallisation,
consist of atoms of determinate figure. This is the case with all solid
bodies whatever, which have come under scientific observation, for
they have been severally found in or reduced to a crystallised form.
Liquids crystallise in freezing, and if aëriform fluids could by any
means be reduced to the solid form, they would probably also manifest
the same effect. Hence it appears reasonable to presume, that all
bodies are composed of atoms; that the different qualities with which
we find different substances endued, depend on the magnitude and figure
of these atoms; that these atoms are indestructible and immutable by
any natural process, for we find the qualities which depend on them
unchangeably the same under all the influences to which they have been
submitted since their creation; that these atoms are so minute in their
magnitude, that they cannot be observed by any means which human art
has yet contrived; but still that magnitudes can be assigned which they
do not exceed.

It is proper, however, to observe here, that the various theorems
of mechanical science do not rest upon any hypothesis concerning
these atoms as a basis. These theorems are not inferred from this
or any other supposition, and therefore their truth would not be in
anywise disturbed, even though it should be established that matter is
physically divisible _in infinitum_. The basis of mechanical science
is _observed facts_, and, since the reasoning is demonstrative, the
conclusions have the same degree of certainty as the facts from which
they are deduced.

(19.) _Porosity._--The _volume_ of a body is the quantity of space
included within its external surfaces. The _mass_ of a body, is the
collection of atoms or material particles of which it consists. Two
atoms or particles are said to be in contact, when they have approached
each other until arrested by their mutual impenetrability. If the
component particles of a body were in contact, the _volume_ would be
completely occupied by the _mass_. But this is not the case. We shall
presently prove, that the component particles of no known substance are
in absolute contact. Hence it follows that the volume consists partly
of material particles, and partly of interstitial spaces, which spaces
are either absolutely void and empty, or filled by some substance of a
different kind from the body in question. These interstitial spaces are
called _pores_.

In bodies which are constituted uniformly throughout their entire
dimensions, the component particles and the pores are uniformly
distributed through the volume; that is, a given space in one part
of the volume will contain the same quantity of matter and the same
quantity of pores as an equal space in another part.

(20.) The proportion of the quantity of matter to the magnitude is
called the _density_. Thus if of two substances, one contain in a
given space twice as much matter as the other, it is said to be “twice
as dense.” The density of bodies is, therefore, proportionate to the
closeness or proximity of their particles; and it is evident, that the
greater the density, the less will be the porosity.

The pores of a body are frequently filled with another body of a more
subtle nature. If the pores of a body on the surface of the earth, and
exposed to the atmosphere, be greater than the atoms of air, then the
air may pervade the pores. This is found to be the case with many sorts
of wood which have an open grain. If a piece of such wood, or of chalk,
or of sugar, be pressed to the bottom of a vessel of water, the air
which fills the pores will be observed to escape in bubbles and to rise
to the surface, the water entering the pores, and taking its place.

If a tall vessel or tube, having a wooden bottom, be filled with
quicksilver, the liquid metal will be forced by its own weight through
the pores of the wood, and will be seen escaping in a silver shower
from the bottom.

(21.) The process of filtration, in the arts, depends on the presence
of pores of such a magnitude as to allow a passage to the liquid, but
to refuse it to those impurities from which it is to be disengaged.
Various substances are used as filtres; but, whatever be used, this
circumstance should always be remembered, that no substance can be
separated from a liquid by filtration, except one whose particles
are larger than those of the liquid. In general, filtres are used to
separate _solid_ impurities from a liquid. The most ordinary filtres
are soft stone, paper, and charcoal.

(22.) All organised substances in the animal and vegetable kingdoms
are, from their very natures, porous in a high degree. Minerals are
porous in various degrees. Among the silicious stones is one called
_hydrophane_, which manifests its porosity in a very remarkable manner.
The stone, in its ordinary state, is semi-transparent. If, however,
it be plunged in water, when it is withdrawn it is as translucent
as glass. The pores, in this case, previously filled with air, are
pervaded by the water, between which and the stone there subsists
a physical relation, by which the one renders the other perfectly
transparent.

Larger mineral masses exhibit degrees of porosity not less striking.
Water percolates through the sides and roofs of caverns and grottoes,
and being impregnated with calcareous and other earths, forms
stalactites, or pendant protuberances, which present a curious
appearance.

(23.) _Compressibility._--That quality, in virtue of which a body
allows its volume to be diminished without diminishing its mass, is
called _compressibility_. This effect is produced by bringing the
constituent particles more close together, and thereby increasing the
density and diminishing the pores. This effect may be produced in
several ways; but the name “compressibility” is only applied to it
when it is caused by the agency of mechanical force, as by pressure or
percussion.

All known bodies, whatever be their nature, are capable of having their
dimensions reduced without diminishing their mass; and this is one of
the most conclusive proofs that all bodies are porous, or that the
constituent atoms are not in contact; for the space by which the volume
may be diminished must, before the diminution, consist of pores.

(24.) _Elasticity._--Some bodies, when compressed by mechanical agency,
will resume their former dimensions with a certain energy when relieved
from the operation of the force which has compressed them. This
property is called _elasticity_; and it follows, from this definition,
that all elastic bodies must be compressible, although the converse is
not true, compressibility not necessarily implying elasticity.

(25.) _Dilatability._--This quality is the opposite of compressibility.
It is the capability observed in bodies to have their volume enlarged
without increasing their mass. This effect may be produced in several
ways. In ordinary circumstances, a body may exist under the constant
action of a pressure by which its volume and density are determined. It
may happen, that on the occasional removal of that pressure, the body
will _dilate_ by a quality inherent in its constitution. This is the
case with common air. Dilatation may also be the effect of heat, as
will presently appear.

The several qualities of bodies which we have noticed in this chapter,
when viewed in relation to each other, present many circumstances
worthy of attention.

(26.) It is a physical law, of high generality, that an increase
in the temperature, or degree of heat by which a body is affected,
is accompanied by an increase of volume; and that a diminution of
temperature is accompanied by a diminution of volume. The exceptions
to this law will be noticed and explained in our treatise on HEAT.
Hence it appears that the reduction of temperature is an effect which,
considered mechanically, is equivalent to compression or condensation,
since it diminishes the volume without altering the mass; and since
this is an effect of which all bodies whatever are susceptible, it
follows that all bodies whatever have _pores_. (23.)

The fact, that the elevation of temperature produces an increase of
volume, is manifested by numerous experiments.

(27.) If a flaccid bladder be tied at the mouth, so as to stop the
escape of air, and be then held before a fire, it will gradually swell,
and assume the appearance of being fully inflated. The small quantity
of air contained in the bladder is, in this case, so much dilated by
the heat, that it occupies a considerably increased space, and fills
the bladder, of which it before only occupied a small part. When the
bladder is removed from the fire, and allowed to resume its former
temperature, the air returns to its former dimensions, and the bladder
becomes again flaccid.

(28.) Let A B, _fig. 2._ be a glass tube, with a bulb at the
end A; and let the bulb A, and a part of the tube, be filled with any
liquid, coloured so as to be visible. Let C be the level of the liquid
in the tube. If the bulb be now exposed to heat, by being plunged in
hot water, the level of the liquid C will rapidly rise towards B. This
effect is produced by the dilatation of the liquid in the bulb, which
filling a greater space, a part of it is forced into the tube. This
experiment may easily be made with a common glass tube and a little
port wine.

Thermometers are constructed on this principle, the rise of the liquid
in the tube being used as an indication of the degree of heat which
causes it. A particular account of these useful instruments will be
found in our treatise on HEAT.

(29.) The change of dimension of solids produced by changes of
temperature being much less than that of bodies in the liquid or
aeriform state, is not so easily observable. A remarkable instance
occurs in the process of shoeing the wheels of carriages. The rim of
iron with which the wheel is to be bound, is made in the first instance
of a diameter somewhat less than that of the wheel; but being raised by
the application of fire to a very high temperature, its volume receives
such an increase, that it will be sufficient to embrace and surround
the wheel. When placed upon the wheel it is cooled, and suddenly
contracting its dimensions, binds the parts of the wheel firmly
together, and becomes securely seated in its place upon the fellies.

(30.) It frequently happens that the stopper of a glass bottle or
decanter becomes fixed in its place so firmly, that the exertion of
force sufficient to withdraw it would endanger the vessel. In this
case, if a cloth wetted with hot-water be applied to the neck of the
bottle, the glass will expand, and the neck will be enlarged, so as to
allow the stopper to be easily withdrawn.

(31.) The contraction of metal consequent upon change of temperature
was applied some time ago in Paris to restore the walls of a tottering
building to their proper position. In the _Conservatoire des Arts
et Métiers_, the walls of a part of the building were forced out of
the perpendicular by the weight of the roof, so that each wall was
leaning outwards. M. Molard conceived the notion of applying the
irresistible force with which metals contract in cooling, to draw the
walls together. Bars of iron were placed in parallel directions across
the building, and at right-angles to the direction of the walls. Being
passed through the walls, nuts were screwed on their ends, outside the
building. Every alternate bar was then heated by lamps, and the nuts
screwed close to the walls. The bars were then cooled, and the lengths
being diminished by contraction, the nuts on their extremities were
drawn together, and with them the walls were drawn through an equal
space. The same process was repeated with the intermediate bars, and
so on alternately until the walls were brought into a perpendicular
position.

(32.) Since there is a continual change of temperature in all bodies on
the surface of the globe, it follows, that there is also a continual
change of magnitude. The substances which surround us are constantly
swelling and contracting, under the vicissitudes of heat and cold. They
grow smaller in winter, and dilate in summer. They swell their bulk
on a warm day, and contract it on a cold one. These curious phenomena
are not noticed, only because our ordinary means of observation are
not sufficiently accurate to appreciate them. Nevertheless, in some
familiar instances the effect is very obvious. In warm weather the
flesh swells, the vessels appear filled, the hand is plump, and the
skin distended. In cold weather, when the body has been exposed to the
open air, the flesh appears to contract, the vessels shrink, and the
skin shrivels.

(33.) The phenomena attending change of temperature are conclusive
proofs of the universal porosity of material substances, but they are
not the only proofs. Many substances admit of compression by the mere
agency of mechanical force.

Let a small piece of cork be placed floating on the surface of water
in a basin or other vessel, and an empty glass goblet be inverted over
the cork, so that its edge just meets the water. A portion of air will
then be confined in the goblet, and detached from the remainder of
the atmosphere. If the goblet be now pressed downwards, so as to be
entirely immersed, it will be observed, that the water will not fill
it, being excluded by the _impenetrability_ of the air inclosed in it.
This experiment, therefore, is decisive of the fact, that air, one of
the most subtle and attenuated substances we know of, possesses the
quality of impenetrability. It absolutely excludes any other body from
the space which it occupies at any given moment.

But although the water does not fill the goblet, yet if the position
of the cork which floats upon its surface be noticed, it will be
found that the level of the water within has risen above its edge or
rim. In fact, the water has partially filled the goblet, and the air
has been forced to contract its dimensions. This effect is produced by
the pressure of the incumbent water forcing the surface in the goblet
against the air, which yields until it is so far compressed that it
acquires a force able to withstand this pressure. Thus it appears
that air is capable of being reduced in its dimensions by mechanical
pressure, independently of the agency of heat. It is _compressible_.

That this effect is the consequence of the pressure of the liquid will
be easily made manifest by showing that, as the pressure is increased,
the air is proportionally contracted in its dimensions; and as it is
diminished, the dimensions are on the other hand enlarged. If the
depth of the goblet in the water be increased, the cork will be seen
to rise in it, showing that the increased pressure, at the greater
depth, causes the air in the goblet to be more condensed. If, on the
other hand, the goblet be raised toward the surface, the cork will be
observed to descend toward the edge, showing that as it is relieved
from the pressure of the liquid, the air gradually approaches to its
primitive dimensions.

(34.) These phenomena also prove, that air has the property of
_elasticity_. If it were simply compressible, and not elastic, it would
retain the dimensions to which it was reduced by the pressure of the
liquid; but this is not found to be the result. As the compressing
force is diminished, so in the same proportion does the air, by its
elastic virtue, exert a force by which it resumes its former dimensions.

That it is the air alone which excludes the water from the goblet,
in the preceding experiments, can easily be proved. When the goblet
is sunk deep in the vessel of water, let it be inclined a little to
one side until its mouth is presented towards the side of the vessel;
let this inclination be so regulated, that the surface of the water
in the goblet shall just reach its edge. Upon a slight increase of
inclination, air will be observed to escape from the goblet, and to
rise in bubbles to the surface of the water. If the goblet be then
restored to its position, it will be found that the cork will rise
higher in it than before the escape of the air. The water in this case
rises and fills the space which the air allowed to escape has deserted.
The same process may be repeated until all the air has escaped, and
then the goblet will be completely filled by the water.

(35.) Liquids are compressible by mechanical force in so slight a
degree, that they are considered in all hydrostatical treatises
as incompressible fluids. They are, however, not absolutely
incompressible, but yield slightly to very intense pressure. The
question of the compressibility of liquids was raised at a remote
period in the history of science. Nearly two centuries ago, an
experiment was instituted at the Academy _del Cimento_ in Florence,
to ascertain whether water be compressible. With this view, a hollow
ball of gold was filled with the liquid, and the aperture exactly
and firmly closed. The globe was then submitted to a very severe
pressure, by which its figure was slightly changed. Now it is proved
in geometry, that a globe has this peculiar property, that any
change whatever in its figure must necessarily diminish its volume
or contents. Hence it was inferred, that if the water did not issue
through the pores of the gold, or burst the globe, its compressibility
would be established. The result of the experiment was, that the water
_did_ ooze through the pores, and covered the surface of the globe,
presenting the appearance of dew, or of steam cooled by the metal.
But this experiment was inconclusive. It is quite true, that if the
water _had not_ escaped upon the change of figure of the globe, the
_compressibility_ of the liquid would have been established. The escape
of the water does not, however, prove its _incompressibility_. To
accomplish this, it would be necessary first to measure accurately the
volume of water which transuded by compression, and next to measure
the diminution of volume which the vessel suffered by its change of
figure. If this diminution were greater than the volume of water which
escaped, it would follow that the water remaining in the globe had
been compressed, notwithstanding the escape of the remainder. But this
could never be accomplished with the delicacy and exactitude necessary
in such an experiment; and, consequently, as far as the question of
the compressibility of water was concerned, nothing was proved. It
forms, however, a very striking illustration of the porosity of so
dense a substance as gold, and proves that its pores are larger than
the elementary particles of water, since these are capable of passing
through them.

(36.) It has since been proved, that water, and other liquids, are
compressible. In the year 1761, Canton communicated to the Royal
Society the results of some experiments which proved this fact. He
provided a glass tube with a bulb, such as that described in (28), and
filled the bulb and a part of the tube with water well purified from
air. He then placed this in an apparatus called a condenser, by which
he was enabled to submit the surface of the liquid in the tube to very
intense pressure of condensed air. He found that the level of the
liquid in the tube fell in a perceptible degree upon the application of
the pressure. The same experiment established the fact, that liquids
are _elastic_; for upon removing the pressure, the liquid rose to its
original level, and therefore resumed its former dimensions.

(37.) Elasticity does not always accompany compressibility. If lead or
iron be submitted to the hammer, it may be hardened and diminished in
its volume; but it will not resume its former volume after each stroke
of the hammer.

(38.) There are some bodies which maintain the state of density in
which they are commonly found by the continual agency of mechanical
pressure; and such bodies are endued with a quality, in virtue of which
they would enlarge their dimensions without limit, if the pressure
which confines them were removed. Such bodies are called _elastic
fluids_ or _gases_, and always exist in the form of common air, in
whose mechanical properties they participate. They are hence often
called _aeriform fluids_.

Those who are provided with an air-pump can easily establish this
property experimentally. Take a flaccid bladder, such as that already
described in (27.), and place it under the glass receiver of an
air-pump: by this instrument we shall be able to remove the air which
surrounds the bladder under the receiver, so as to relieve the small
quantity of air which is inclosed in the bladder from the pressure
of the external air: when this is accomplished, the bladder will be
observed to swell, as if it were inflated, and will be perfectly
distended. The air contained in it, therefore, has a tendency to
dilate, which takes effect when it ceases to be resisted by the
pressure of surrounding air.

(39.) It has been stated that the increase or diminution of temperature
is accompanied by an increase or diminution of volume. Related to this,
there is another phenomenon too remarkable to pass unnoticed, although
this is not the proper place to dwell upon it: it is the converse of
the former; viz. that an increase or diminution of bulk is accompanied
by a diminution or increase of temperature. As the application of heat
from some foreign source produces an increase of dimensions, so if the
dimensions be increased from any other cause, a corresponding portion
of the heat which the body had before the enlargement, will be absorbed
in the process, and the temperature will be thereby diminished. In the
same way, since the abstraction of heat causes a diminution of volume,
so if that diminution be caused by any other means, the body will _give
out_ the heat which in the other case was abstracted, and will rise in
its temperature.

Numerous and well-known facts illustrate these observations. A smith by
hammering a piece of bar iron, and thereby compressing it, will render
it _red hot_. When air is violently compressed, it becomes so hot as
to ignite cotton and other substances. An ingenious instrument for
producing a light for domestic uses has been constructed, consisting
of a small cylinder, in which a solid piston moves air-tight: a little
tinder, or dry sponge, is attached to the bottom of the piston, which
is then violently forced into the cylinder: the air between the bottom
of the cylinder and the piston becomes intensely compressed, and
evolves so much heat as to light the tinder.

In all the cases where friction or percussion produces heat or fire,
it is because they are means of compression. The effects of flints, of
pieces of wood rubbed together, the warmth produced by friction on the
flesh, are all to be attributed to the same cause.




CHAP. III.

INERTIA.


(40.) The quality of matter which is of all others the most important
in mechanical investigations, is that which has been called _Inertia_.

Matter is incapable of spontaneous change. This is one of the earliest
and most universal results of human observation: it is equivalent to
stating that mere matter is deprived of life; for spontaneous action
is the only test of the presence of the living principle. If we see a
mass of matter undergo any change, we never seek for the cause of that
change in the body itself; we look for some external cause producing
it. This inability for voluntary change of state or qualities is a
more general principle than inertia. At any given moment of time a
body must be in one or other of two states, rest or motion. _Inertia_,
or _inactivity_, signifies the total absence of power to change this
state. A body endued with inertia cannot of itself, and independent of
all external influence, commence to move from a state of rest; neither
can it when moving arrest its progress and become quiescent.

(41.) The same property by which a body is unable by any power of its
own to pass from a state of rest to one of motion, or _vice versâ_,
also renders it incapable of increasing or diminishing any motion which
it may have received from an external cause. If a body be moving in a
certain direction at the rate of ten miles per hour, it cannot by any
energy of its own change its rate of motion to eleven or nine miles an
hour. This is a direct consequence of that manifestation of inertia
which has just been explained. For the same power which would cause a
body moving at ten miles an hour to increase its rate to eleven miles,
would also cause the same body at rest to commence moving at the rate
of one mile an hour; and the same power which would cause a body moving
at the rate of ten miles an hour to move at the rate of nine miles in
the hour, would cause the same body moving at the rate of one mile
an hour to become quiescent. It therefore appears, that to increase
or diminish the motion of a body is an effect of the same kind as to
change the state of rest into that of motion, or _vice versâ_.

(42.) The effects and phenomena which hourly fall under our observation
afford unnumbered examples of the inability of lifeless matter to put
itself into motion, or to increase any motion which may have been
communicated to it. But it does not happen that we have the same
direct and frequent evidence of its inability to destroy or diminish
any motion which it may have received. And hence it arises, that while
no one will deny to matter the former effect of inertia, few will at
first acknowledge the latter. Indeed, even so late as the time of
KEPLER, philosophers themselves held it as a maxim, that “matter is
more inclined to rest than to motion;” we ought not, therefore, to be
surprised if in the present day those who have not been conversant with
physical science are slow to believe that a body once put in motion
would continue for ever to move with the same velocity, if it were not
stopped by some external cause.

Reason, assisted by observation, will, however, soon dispel this
illusion. Experience shows us in various ways, that the same causes
which destroy motion in one direction are capable of producing as
much motion in the opposite direction. Thus, if a wheel, spinning on
its axis with a certain velocity, be stopped by a hand seizing one of
the spokes, the effort which accomplishes this is exactly the same as,
had the wheel been previously at rest, would have put it in motion in
the opposite direction with the same velocity. If a carriage drawn
by horses be in motion, the same exertion of power in the horses is
necessary to stop it, as would be necessary to _back_ it, if it were
at rest. Now, if this be admitted as a general principle, it must be
evident that a body which can destroy or diminish its own motion must
also be capable of putting itself into motion from a state of rest,
or of increasing any motion which it has received. But this latter is
contrary to all experience, and therefore we are compelled to admit
that a body cannot diminish or destroy any motion which it has received.

Let us enquire why we are more disposed to admit the inability of
matter to produce than to destroy motion in itself. We see most of
those motions which take place around us on the surface of the earth
subject to gradual decay, and if not renewed from time to time, at
length cease. A stone rolled along the ground, a wheel revolving on
its axis, the heaving of the deep after a storm, and all other motions
produced in bodies by external causes, decay, when the exciting
cause is suspended; and if that cause do not renew its action, they
ultimately cease.

But is there no exciting cause, on the other hand, which thus gradually
deprives those bodies of their motion?--and if that cause were
removed, or its intensity diminished, would not the motion continue,
or be more slowly retarded? When a stone is rolled along the ground,
the inequalities of its shape as well as those of the ground are
impediments, which retard and soon destroy its motion. Render the
stone round, and the ground level, and the motion will be considerably
prolonged. But still small asperities will remain on the stone, and on
the surface over which it rolls: substitute for the stone a ball of
highly-polished steel, moving on a highly-polished steel plane, truly
level, and the motion will continue without sensible diminution for
a very long period; but even here, and in every instance of motions
produced by art, minute asperities must exist on the surfaces which
move in contact with each other, which must resist, gradually diminish,
and ultimately destroy the motion.

Independently of the obstructions to the continuation of motion arising
from friction, there is another impediment to which all motions on the
surface of the earth are liable--the resistance of the air. How much
this may affect the continuation of motion appears by many familiar
effects. On a calm day carry an open umbrella with its concave side
presented in the direction in which you are moving, and a powerful
resistance will be opposed to your progress, which will increase with
every increase of the speed with which you move.

(43.) We are not, however, without direct experience to prove, that
motions when unresisted will for ever continue. In the heavens we find
an apparatus, which furnishes a sublime verification of this principle.
There, removed from all casual obstructions and resistances, the vast
bodies of the universe roll on in their appointed paths with unerring
regularity, preserving without diminution all that motion which they
received at their creation from the hand which launched them into
space. This alone, unsupported by other reasons, would be sufficient
to establish the quality of inertia; but viewed in connection with the
other circumstances previously mentioned, no doubt can remain that this
is an universal law of nature.

(44.) It has been proved, that inability to change the _quantity_ of
motion is a consequence of _inertia_. The inability to change the
_direction_ of motion is another consequence of this quality. The same
cause which increases or diminishes motion, would also give motion
to a body at rest; and therefore we infer that the same inability
which prevents a body from moving itself, will also prevent it from
increasing or diminishing any motion which it has received. In the
same manner we can show, that any cause which changes the direction of
motion would also give motion to a body at rest; and therefore if a
body change the direction of its own motion, the same body might move
itself from a state of rest; and therefore the power of changing the
direction of any motion which it may have received is inconsistent with
the quality of inertia.

(45.) If a body, moving from A, _fig. 3._ to B, receive at
B a blow in the direction C B E, it will immediately
change its direction to that of another line B D. The cause which
produces this change of direction would have put the body in motion in
the direction B E, had it been quiescent at B when it sustained
the blow.

(46.) Again, suppose G H to be a hard plane surface; and let the
body be supposed to be perfectly inelastic. When it strikes the surface
at B, it will commence to move along it in the direction B H. This
change of direction is produced by the resistance of the surface. If
the body, instead of meeting the surface in the direction A B, had
moved in the direction E B, perpendicular to it, all motion would
have been destroyed, and the body reduced to a state of rest.

(47.) By the former example it appears that the deflecting cause would
have put a quiescent body in motion, and by the latter it would have
reduced a moving body to a state of rest. Hence the phenomenon of a
change of direction is to be referred to the same class as the change
from rest to motion, or from motion to rest. The quality of inertia
is, therefore, inconsistent with any change in the direction of motion
which does not arise from an external cause.

(48.) From all that has been here stated, we may infer generally, that
an inanimate parcel of matter is incapable of changing its state of
rest or motion; that, in whatever state it be, in that state it must
for ever continue, unless disturbed by some external cause; that
if it be in motion, that motion must always be _uniform_, or must
proceed at the same rate, equal spaces being moved over in the same
time: any increase of its rate must betray some impelling cause; any
diminution must proceed from an impeding cause, and neither of these
causes can exist in the body itself; that such motion must not only be
constantly at the same uniform rate, but also must be always in the
same direction, any deflection from one uniform direction necessarily
arising from some external influence.

The language sometimes used to explain the property of inertia in
popular works, is eminently calculated to mislead the student. The
terms resistance and stubbornness to move are faulty in this respect.
Inertia implies absolute passiveness, a perfect indifference to rest
or motion. It implies as strongly the absence of all resistance to
the reception of motion, as it does the absence of all power to move
itself. The term _vis inertiæ_ or _force of inactivity_, so frequently
used even by authors pretending to scientific accuracy, is still more
reprehensible. It is a contradiction in terms; the term _inactivity_
implying the absence of all force.

       *       *       *       *       *

(49.) Before we close this chapter, it may be advantageous to point out
some practical and familiar examples of the general law of inertia.
The student must, however, recollect, that the great object of
science is generalisation, and that his mind is to be elevated to the
contemplation of the _laws_ of nature, and to receive a habit the very
reverse of that which disposes us to enjoy the descent from generals to
particulars. Instances, taken from the occurrences of ordinary life,
may, however, be useful in verifying the general law, and in impressing
it upon the memory; and for this reason, we shall occasionally in the
present treatise refer to such examples; always, however, keeping
them in subservience to the general principles of which they are
manifestations, and on which the attention of the student should never
cease to be fixed.

(50.) If a carriage, a horse, or a boat, moving with speed, be suddenly
retarded or stopped, by any cause which does not at the same time
affect passengers, riders, or any loose bodies which are carried, they
will be precipitated in the direction of the motion; because by reason
of their inertia, they persevere in the motion which they shared in
common with that which transported them, and are not deprived of that
motion by the same cause.

(51.) If a passenger leap from a carriage in rapid motion, he will fall
in the direction in which the carriage is moving at the moment his feet
meet the ground; because his body, on quitting the vehicle, retains, by
its inertia, the motion which it had in common with it. When he reaches
the ground, this motion is destroyed by the resistance of the ground to
the feet, but is retained in the upper and heavier part of the body; so
that the same effect is produced as if the feet had been tripped.

(52.) When a carriage is once put in motion with a determinate speed
on a level road, the only force necessary to sustain the motion is
that which is sufficient to overcome the friction of the road; but
at starting a greater expenditure of force is necessary, inasmuch as
not only the friction is to be overcome, but the force with which the
vehicle is intended to move must be communicated to it. Hence we see
that horses make a much greater exertion at starting than subsequently,
when the carriage is in motion; and we may also infer the inexpediency
of attempting to start at full speed, especially with heavy carriages.

(53.) _Coursing_ owes all its interest to the instinctive consciousness
of the nature of inertia which seems to govern the measures of the
hare. The greyhound is a comparatively heavy body moving at the same
or greater speed in pursuit. The hare _doubles_, that is, suddenly
changes the direction of her course, and turns back at an oblique angle
with the direction in which she had been running. The greyhound, unable
to resist the tendency of its body to persevere in the rapid motion it
had acquired, is urged forward many yards before it is able to check
its speed and return to the pursuit. Meanwhile the hare is gaining
ground in the other direction, so that the animals are at a very
considerable distance asunder when the pursuit is recommenced. In this
way a hare, though much less fleet than a greyhound, will often escape
it.

In racing, the horses shoot far beyond the winning-post before their
course can be arrested.




CHAP. IV.

ACTION AND REACTION.


(54.) The effects of inertia or inactivity, considered in the last
chapter, are such as may be manifested by a single insulated body,
without reference to, or connection with, any other body whatever. They
might all be recognised if there were but one body existing in the
universe. There are, however, other important results of this law, to
the development of which two bodies at least are necessary.

(55.) If a mass A, _fig._ 4., moving towards C, impinge upon an equal
mass, which is quiescent at B, the two masses will move together
towards C after the impact. But it will be observed, that their speed
after the impact will be only half that of A before it. Thus, after the
impact, A loses half its velocity; and B, which was before quiescent,
receives exactly this amount of motion. It appears, therefore, in this
case, that B receives exactly as much motion as A loses: so that the
real quantity of motion from B to C is the same as the quantity of
motion from A to B.

Now, suppose that B consisted of two masses, each equal to A, it would
be found that in this case the velocity of the triple mass after impact
would be one-third of the velocity from A to B. Thus, after impact, A
loses two-thirds of its velocity and, B consisting of two masses each
equal to A, each of these two receives one-third of A’s motion; so that
the whole motion received by B is two-thirds of the motion of A before
impact. By the impact, therefore, exactly as much motion is received by
B as is lost by A.

A similar result will be obtained, whatever proportion may subsist
between the masses A and B. Suppose B to be ten times A; then the whole
motion of A must, after the impact, be distributed among the parts of
the united masses of A and B: but these united masses are, in this
case, eleven times the mass of A. Now, as they all move with a common
motion, it follows that A’s former motion must be equally distributed
among them; so that each part shall have an eleventh part of it.
Therefore the velocity after impact will be the eleventh part of the
velocity of A before it. Thus A loses by the impact ten-eleventh parts
of its motion, which are precisely what B receives.

Again, if the masses of A and B be 5 and 7, then the united mass after
impact will be 12. The motion of A before impact will be equally
distributed between these twelve parts, so that each part will have
a twelfth of it; but five of these parts belong to the mass A, and
seven to B. Hence B will receive seven-twelfths, while A retains
five-twelfths.

(56.) In general, therefore, when a mass A in motion impinges on a mass
B at rest, to find the motion of the united mass after impact, “divide
the whole motion of A into as many equal parts as there are equal
component masses in A and B together, and then B will receive by the
impact as many parts of this motion as it has equal component masses.”

This is an immediate consequence of the property of inertia, explained
in the last chapter. If we were to suppose that by their mutual impact
A were to give to B either more or less motion than that which it (A)
loses, it would necessarily follow, that either A or B must have a
power of producing or of resisting motion, which would be inconsistent
with the quality of inertia already defined. For if A give to B _more_
motion than it loses, all the overplus or excess must be excited in B
by the _action_ of A; and, therefore, A is not inactive, but is capable
of exciting motion which it does not possess. On the other hand, B
cannot receive from A _less_ motion than A loses, because then B must
be admitted to have the power by its resistance of destroying all the
deficiency; a power essentially active, and inconsistent with the
quality of inertia.

(57.) If we contemplate the effects of impact, which we have now
described, as facts ascertained by experiment (which they may be),
we may take them as further verification of the universality of the
quality of inertia. But, on the other hand, we may view them as
phenomena which may certainly be predicted from the previous knowledge
of that quality; and this is one of many instances of the advantage
which science possesses over knowledge _merely_ practical. Having
obtained by observation or experience a certain number of simple facts,
and thence deduced the general qualities of bodies, we are enabled,
by demonstrative reasoning, to discover _other facts_ which have
never fallen under our observation, or, if so, may have never excited
attention. In this way philosophers have discovered certain small
motions and slight changes which have taken place among the heavenly
bodies, and have directed the attention of astronomical observers to
them, instructing them with the greatest precision as to the exact
moment of time and the point of the firmament to which they should
direct the telescope, in order to witness the predicted event.

(58.) Since by the quality of inertia a body can neither generate
nor destroy motion, it follows that when two bodies act upon each
other in any way whatever, the total quantity of motion in a given
direction, after the action takes place, must be the same as before
it, for otherwise some motion would be produced by the action of the
bodies, which would contradict the principle that they are inert. The
word “action” is here applied, perhaps improperly, but according to the
usage of mechanical writers, to express a certain phenomenon or effect.
It is, therefore, not to be understood as implying any active principle
in the bodies to which it is attributed.

(59.) In the cases of collision of which we have spoken, one of the
masses B was supposed to be quiescent before the impact. We shall now
suppose it to be moving in the same direction as A, that is, towards C,
but with a less velocity, so that A shall overtake it, and impinge upon
it. After the impact, the two masses will move towards C with a common
velocity, the amount of which we now propose to determine.

If the masses A and B be equal, then their motions or velocities added
together must be the motion of the united mass after impact, since no
motion can either be created or destroyed by that event. But as A and B
move with a common motion, this sum must be equally distributed between
them, and therefore each will move with a velocity equal to half the
sum of their velocities before the impact. Thus, if A have the velocity
7, and B have 5, the velocity of the united mass after impact is 6,
being the half of 12, the sum of 7 and 5.

If A and B be not equal, suppose them divided into equal component
parts, and let A consist of 8, and B of 6, equal masses: let the
velocity of A be 17, so that the motion of each of the 8 parts being
17, the motion of the whole will be 136. In the same manner, let the
velocity of B be 10, the motion of each part being 10, the whole motion
of the 6 parts will be 60. The sum of the two motions, therefore,
towards C is 196; and since none of this can be lost by the impact,
nor any motion added to it, this must also be the whole motion of the
united masses after impact. Being equally distributed among the 14
component parts of which these united masses consist, each part will
have a fourteenth of the whole motion. Hence, 196 being divided by 14,
we obtain the quotient 14, which is the velocity with which the whole
moves.

(60.) In general, therefore, when two masses moving in the same
direction impinge one upon the other, and after impact move together,
their common velocity may be determined by the following rule: “Express
the masses and velocities by numbers in the usual way, and multiply
the numbers expressing the masses by the numbers which express the
velocities; the two products thus obtained being added together, and
their sum divided by the sum of the numbers expressing the masses, the
quotient will be the number expressing the required velocity.”

(61.) From the preceding details, it appears that _motion_ is not
adequately estimated by _speed_ or _velocity_. For example, a certain
mass A, moving at a determinate rate, has a certain quantity of motion.
If another equal mass B be added to A, and a similar velocity be given
to it, as much more motion will evidently be called into existence. In
other words, the _two_ equal masses A and B united have _twice_ as much
motion as the single mass A had when moving alone, and with the same
speed. The same reasoning will show that _three_ equal masses will with
the same speed have _three times_ the motion of any one of them. In
general, therefore, the velocity being the same, the quantity of motion
will always be increased or diminished in the same proportion as the
mass moved is increased or diminished.

(62.) On the other hand, the quantity of motion does not depend on the
mass _only_, but also on the speed. If a certain determinate mass move
with a certain determinate speed, another equal mass which moves with
twice the speed, that is, which moves over twice the space in the same
time, will have twice the quantity of motion. In this manner, the mass
being the same, the quantity of motion will increase or diminish in the
same proportion as the velocity.

(63.) The true estimate, then, of the quantity of motion is found
by multiplying together the numbers which express the mass and the
velocity. Thus, in the example which has been last given of the impact
of masses, the quantities of motion before and after impact appear to
be as follow:

          Before Impact.          |        After Impact.
                                  |
  Mass of A      8                | Mass of A        8
  Velocity of A 17                | Common velocity 14
                 -----------------+               --------------
  Quantity of  } 8 × 17[1] or 136 | Quantity of  } 8 × 14 or 112
   motion of A }                  |  motion of A }
                 -----------------+               --------------
  Mass of B      6                | Mass of B        6
  Velocity of B 10                | Common velocity 14
                 -----------------+               --------------
  Quantity of  }     6 × 10 or 60 | Quantity of  }   6 × 14 = 84
   motion of B }                  |  motion of B }
                 -----------------+               --------------

  * The sign × placed between two numbers meant that they are to be
  multiplied together.

By this calculation it appears that in the impact A has lost a quantity
of motion expressed by 24, and that B has received exactly that amount.
The effect, therefore, of the impact is a _transfer_ of motion from A
to B; but no new motion is produced in the direction A C which did
not exist before. This is obviously consistent with the property of
inertia, and indeed an inevitable result of it.

These results may be generalised and more clearly and concisely
expressed by the aid of the symbols of arithmetic.

Let _a_ express the velocity of A.

Let _b_ express the velocity of B.

Let _x_ express the velocity of the united masses of A and B after
impact, each of these velocities being expressed in feet per second,
and the masses of A and B being expressed by the weight in pounds.

We shall then have the momenta or moving forces of A and B before
impact, expressed by A × _a_ and B × _b_, and the moving force of the
united mass after impact will be expressed by (A + B) × _x_.

The moving force of A after impact is A × _x_, and therefore the force
it loses by the collision will be (A × _a_ - A × _x_). The force of B
after impact will be B × _x_, and therefore the force it gains will be
B × _x_ - B × _b_. But since the force lost by A must be equal to the
force gained by B, we shall have

  A × _a_ - A × _x_ = B × _x_ - B × _b_

from which it is easy to infer

  (A + B) × _x_ = A × _a_ + B × _b_

and if it be required to express the velocity of the united masses
after impact, we have

  _x_ = (A × _a_ + B × _b_)/(A + B)

When it is said that A × _a_ and B × _b_ express the moving forces of
A and B, it must be understood that the _unit_ of momentum or moving
force is in the case here supposed, the force with which a mass of
matter weighing 1 lb. would move if its velocity were 1 foot per
second, and accordingly the forces with which A and B move before
impact are as many times this as there are units respectively in the
numbers signified by the general symbols A × _a_ and B × _b_.

In like manner, the force of the united masses after impact is as many
times greater than that of 1 lb. moving through 1 foot per second
as there are units in the numbers expressed by (A + B) × _x_.

(64.) These phenomena present an example of a law deduced from the
property of inertia, and generally expressed thus--“action and reaction
are equal, and in contrary directions.” The student must, however, be
cautious not to receive these terms in their ordinary acceptation.
After the full explanation of inertia given in the last chapter, it
is, perhaps, scarcely necessary here to repeat, that in the phenomena
manifested by the motion of two bodies, there can be neither “action”
nor “reaction,” properly so called. The bodies are absolutely incapable
either of action or resistance. The sense in which these words must
be received, as used in the _law_, is merely an expression of the
_transfer_ of a certain quantity of motion from one body to another,
which is called an _action_ in the body which loses the motion, and a
_reaction_ in the body which receives it. The _accession_ of motion to
the latter is said to proceed from the _action_ of the former; and the
_loss_ of the same motion in the former is ascribed to the _reaction_
of the latter. The whole phraseology is, however, most objectionable
and unphilosophical, and is calculated to create wrong notions.

(65.) The bodies impinging were, in the last case, supposed to move in
the same direction. We shall now consider the case in which they move
in opposite directions.

First, let the masses A and B be supposed to be equal, and moving in
opposite directions, with the same velocity. Let C, _fig. 5._, be
the point at which they meet. The equal motions in opposite directions
will, in this case, destroy each other, and both masses will be
reduced to a state of rest. Thus, the mass A loses all its motion in
the direction A C, which it may be supposed to transfer to B at
the moment of impact. But B having previously had an equal quantity
of motion in the direction B C, will now have two equal motions
impressed upon it, in directions immediately opposite; and these
motions neutralising each other, the mass becomes quiescent. In this
case, therefore, as in all the former examples, each body transfers
to the other all the motion which it loses, consistently with the
principle of “action and reaction.”

The masses A and B being still supposed equal, let them move towards
C with different velocities. Let A move with the velocity 10, and B
with the velocity 6. Of the 10 parts of motion with which A is endued,
6 being transferred to B, will destroy the equal velocity 6, which B
has in the direction B C. The bodies will then move together in
the direction C B, the four remaining parts of A’s motion being
equally distributed between them. Each body will, therefore, have two
parts of A’s original motion, and 2 therefore will be their common
velocity after impact. In this case, A loses 8 of the 10 parts of its
motion in the direction A C. On the other hand, B loses the entire
of its 6 parts of motion in the direction B C, and receives 2
parts in the direction A C. This is equivalent to receiving 8
parts of A’s motion in the direction A C. Thus, according to the
law of “action and reaction,” B receives exactly what A loses.

Finally, suppose that both the masses and velocities of A and B are
unequal. Let the mass of A be 8, and its velocity 9: and let the mass
of B be 6, and its velocity 5. The quantity of motion of A will be 72,
and that of B, in the opposite direction, will be 30. Of the 72 parts
of motion, which A has in the direction A C, 30 being transferred
to B, will destroy all its 30 parts of motion in the direction
B C, and the two masses will move in the direction C B, with
the remaining 42 parts of motion, which will be equally distributed
among their 14 component masses. Each component part will, therefore,
receive 3 parts of motion; and accordingly 3 will be the common
velocity of the united mass after impact.

(66.) When two masses moving in opposite directions impinge and move
together, their common velocity after impact may be found by the
following rule:--“Multiply the numbers expressing the masses by those
which express the velocities respectively, and subtract the lesser
product from the greater; divide the remainder by the sum of the
numbers expressing the masses, and the quotient will be the common
velocity; the direction will be that of the mass which has the greater
quantity of motion.”

It may be shown without difficulty, that the example which we have
just given obeys the law of “action and reaction.”

           Before impact.          |          After impact.
                                   |
  Mass of A                8       | Mass of A                8
  Velocity of A            9       | Common velocity          3
                       ------------+                      -----------
  Quantity of motion } 8 × 9 or 72 | Quantity of motion } 8 × 3 or 24
   in direction A C  }             |  in direction A C  }
                       ------------+                      -----------
  Mass of B                6       | Mass of B                6
  Velocity of B            5       | Common velocity          3
                       ------------+                      -----------
  Quantity of motion } 6 × 5 or 30 | Quantity of motion } 6 × 3 or 18
   in direction B C  }             |  in direction A C  }
                       ------------+                      -----------

Hence it appears that the quantity of motion in the direction A C
of which A has been deprived by the impact is 48, the difference
between 72 and 24. On the other hand, B loses by the impact the
quantity 30 in the direction B C, which is equivalent to receiving
30 in the direction A C. But it also acquires a quantity 18 in
the direction A C, which, added to the former 30, gives a total
of 48 received by B in the direction A C. Thus the same quantity
of motion which A loses in the direction A C, is received by B in
the same direction. The law of “action and reaction” is, therefore,
fulfilled.

This result may in like manner be generalised. Retaining the former
symbols, the moving forces of A and B before impact will be A × _a_ and
B × _b_ and their forces after impact will be A × _x_ and B × _x_. The
force lost by A will therefore be A × _a_ - A × _x_. The mass B will
have lost all the force B × _b_ which it had in its former direction,
and will have received the force B × _x_ in the opposite direction.
Therefore the actual force imparted to B by the collision will be B
× _b_ + B × _x_. But since the force lost by A must be equal to that
imparted to B, we shall have

  A × _a_ - A × _x_ = B × _b_ + B × _x_

and therefore

  (A + B) × _x_ = A × _a_ - B × _b_

and if the common velocity after impact be required, we have

  _x_ = (A × _a_ - B × _b_)/(A + B)

As a general rule, therefore, to find the common velocity after impact.
Multiply the weights by the previous velocities and take their sum if
the bodies move in the same direction, and their difference if they
move in opposite directions, and divide the one or the other by the sum
of their weights. The greatest will be the velocity after impact.

(67.) The examples of the equality of action and reaction in the
collision of bodies may be exhibited experimentally by a very simple
apparatus. Let A, _fig. 6._, and B be two balls of soft clay, or
any other substance which is inelastic, or nearly so, and let these
be suspended from C by equal strings, so that they may be in contact;
and let a graduated arc, of which the centre is C, be placed so that
the balls may oscillate over it. One of the balls being moved from its
place of rest along the arc, and allowed to descend upon the other
through a certain number of degrees, will strike the other with a
velocity corresponding to that number of degrees, and both balls will
then move together with a velocity which may be estimated by the number
of degrees of the arc through which they rise.

(68.) In all these cases in which we have explained the law of “action
and reaction,” the transfer of motion from one body to the other has
been made by impact or collision. The phenomenon has been selected only
because it is the most ordinary way in which bodies are seen to affect
each other. The law is, however, universal, and will be fulfilled
in whatever manner the bodies may affect each other. Thus A may be
connected with B by a flexible string, which, at the commencement of
A’s motion, is slack. Until the string becomes stretched, that is,
until A’s distance from B becomes equal to the length of the string,
A will continue to have all the motion first impressed upon it. But
when the string is stretched, a part of that motion is transferred to
B, which is then drawn after A; and whatever motion B in this way
receives, A must lose. All that has been observed of the effect of
motion transferred by impact will be equally applicable in this case.

Again, if B, _fig. 4._, be a magnet moving in the direction
B C with a certain quantity of motion, and while it is so moving a
mass of iron be placed at rest at A, the attraction of the magnet will
draw the iron after it towards C, and will thus communicate to the iron
a certain quantity of motion in the direction of C. All the motion thus
communicated to the iron A must be lost by the magnet B.

If the magnet and the iron were both placed quiescent at B and A, the
attraction of the magnet would cause the iron to move from A towards B;
but the magnet in this case not having any motion, cannot be literally
said to _transfer_ a motion to the iron. At the moment, however, when
the iron begins to move from A towards B, the magnet will be observed
to begin also to move from B towards A; and if the velocities of the
two bodies be expressed by numbers, and respectively multiplied by the
numbers expressing their masses, the quantities of motion thus obtained
will be found to be exactly equal. We have already explained why a
quantity of motion received in the direction B A, is equivalent
to the same quantity lost in the direction A B. Hence it appears,
that the magnet in receiving as much motion in the direction B A,
as it gives in the direction A B, suffers an effect which is
equivalent to losing as much motion directed towards C as it has
communicated to the iron in the same direction.

In the same manner, if the body B had any property in virtue of which
it might _repel_ A, it would itself be repelled with the same quantity
of motion. In a word, whatever be the manner in which the bodies may
affect each other, whether by collision, traction, attraction, or
repulsion, or by whatever other name the phenomenon may be designated,
still it is an inevitable consequence, that any motion, in a given
direction, which one of the bodies may receive, must be accompanied by
a loss of motion in the same direction, and to the same amount, by
the other body, or the acquisition of as much motion in the contrary
direction; or, finally, by a loss in the same direction, and an
acquisition of motion in the contrary direction, the combined amount of
which is equal to the motion received by the former.

(69.) From the principle, that the force of a body in motion depends on
the mass and the velocity, it follows, that any body, however small,
may be made to move with the same force as any other body, however
great, by giving to the smaller body a velocity which bears to that of
the greater the same proportion as the mass of the greater bears to the
mass of the smaller. Thus a feather, ten thousand of which would have
the same weight as a cannon-ball, would move with the same force if
it had ten thousand times the velocity; and in such a case, these two
bodies encountering in opposite directions, would mutually destroy each
other’s motion.

(70.) The consequences of the property of inertia, which have been
explained in the present and preceding chapters, have been given by
Newton, in his PRINCIPIA, and, after him, in most English treatises on
mechanics, under the form of three propositions, which are called the
“laws of motion.” They are as follow:--


I.

“Every body must persevere in its state of rest, or of uniform motion
in a straight line, unless it be compelled to change that state by
forces impressed upon it.”


II.

“Every change of motion must be proportional to the impressed force,
and must be in the direction of that straight line in which the force
is impressed.”


III.

“Action must always be equal and contrary to reaction; or the actions
of two bodies upon each other must be equal, and directed towards
contrary sides.”

When _inertia_ and _force_ are defined, the first law becomes an
identical proposition. The second law cannot be rendered perfectly
intelligible until the student has read the chapter on the composition
and resolution of forces, for, in fact, it is intended as an expression
of the whole body of results in that chapter. The third law has
been explained in the present chapter, as far as it can be rendered
intelligible in the present stage of our progress.

We have noticed these formularies more from a respect for the
authorities by which they have been proposed and adopted, than from any
persuasion of their utility. Their full import cannot be comprehended
until nearly the whole of elementary mechanics has been acquired, and
then all such summaries become useless.

       *       *       *       *       *

(71.) The consequences deduced from the consideration of the quality
of inertia in this chapter, will account for many effects which fall
under our notice daily, and with which we have become so familiar, that
they have almost ceased to excite curiosity. One of the facts of which
we have most frequent practical illustration is, that the quantity of
motion or _moving force_, as it is sometimes called, is estimated by
the velocity of the motion, and the weight or mass of the thing moved
conjointly.

If the same force impel two balls, one of one pound weight, and the
other of two pounds, it follows, since the balls can neither give force
to themselves, nor resist that which is impressed upon them, that they
will move with the same force. But the lighter ball will move with
twice the speed of the heavier. The impressed force which is manifested
by giving velocity to a double mass in the one, is engaged in giving a
double velocity to the other.

If a cannon-ball were forty times the weight of a musket-ball, but the
musket-ball moved with forty times the velocity of the cannon-ball,
both would strike any obstacle with the same force, and would overcome
the same resistance; for the one would acquire from its velocity as
much force as the other derives from its weight.

A very small velocity may be accompanied by enormous force, if the mass
which is moved with that velocity be proportionally great. A large
ship, floating near the pier wall, may approach it with so small a
velocity as to be scarcely perceptible, and yet the force will be so
great as to crush a small boat.

A grain of shot flung from the hand, and striking the person, will
occasion no pain, and indeed will scarcely be felt, while a block of
stone having the same velocity would occasion death.

If a body in motion strike a body at rest, the striking body must
sustain as great a shock from the collision as if it had been at rest,
and struck by the other body with the same force. For the loss of force
which it sustains in the one direction, is an effect of the same kind
as if, being at rest, it had received as much force in the opposite
direction. If a man, walking rapidly or running, encounters another
standing still, he suffers as much from the collision as the man
against whom he strikes.

If a leaden bullet be discharged against a plank of hard wood, it will
be found that the round shape of the ball is destroyed, and that it
has itself suffered a force by the impact, which is equivalent to the
effect which it produces upon the plank.

When two bodies moving in opposite directions meet, each body sustains
as great a shock as if, being at rest, it had been struck by the other
body with the united forces of the two. Thus, if two equal balls,
moving at the rate of ten feet in a second, meet, each will be struck
with the same force as if, being at rest, the other had moved against
it at the rate of twenty feet in a second. In this case one part of the
shock sustained arises from the loss of force in one direction, and
another from the reception of force in the opposite direction.

For this reason, two persons walking in opposite directions receive
from their encounter a more violent shock than might be expected. If
they be of nearly equal weight, and one be walking at the rate of three
and the other four miles an hour, each sustains the same shock as if he
had been at rest, and struck by the other running at the rate of seven
miles an hour.

This principle accounts for the destructive effects arising from ships
running foul of each other at sea. If two ships of 500 tons burden
encounter each other, sailing at ten knots an hour, each sustains the
shock which, being at rest, it would receive from a vessel of 1000 tons
burden sailing ten knots an hour.

It is a mistake to suppose, that when a large and small body encounter,
the small body suffers a greater shock than the large one. The shock
which they sustain must be the same; but the large body may be better
able to bear it.

When the fist of a pugilist strikes the body of his antagonist, it
sustains as great a shock as it gives; but the fist being more fitted
to endure the blow, the injury and pain are inflicted on his opponent.
This is not the case, however, when fist meets fist. Then the parts
in collision are equally sensitive and vulnerable, and the effect is
aggravated by both having approached each other with great force. The
effect of the blow is the same as if one fist, being held at rest, were
struck by the other with the combined force of both.




CHAP. V.

THE COMPOSITION AND RESOLUTION OF FORCE.


(72.) Motion and pressure are terms too familiar to need explanation.
It may be observed, generally, that definitions in the first rudiments
of a science are seldom, if ever, comprehended. The force of words is
learned by their application; and it is not until a definition becomes
useless, that we are taught the meaning of the terms in which it is
expressed. Moreover, we are perhaps justified in saying, that in the
mathematical sciences the fundamental notions are of so uncompounded a
character, that definitions, when developed and enlarged upon, often
draw us into metaphysical subtleties and distinctions, which, whatever
be their merit or importance, would be here altogether misplaced. We
shall, therefore, at once take it for granted, that the words _motion_
and _pressure_ express phenomena or effects which are the subjects
of constant experience and hourly observation; and if the scientific
use of these words be more precise than their general and popular
application, that precision will soon be learned by their frequent use
in the present treatise.

(73.) FORCE is the name given in mechanics to whatever produces motion
or pressure. This word is also often used to express the motion or
pressure itself; and when the cause of the motion or pressure is not
known, this is the only correct use of the word. Thus, when a piece of
iron moves toward a magnet, it is usual to say that the cause of the
motion is “the attraction of the magnet;” but in effect we are ignorant
of the _cause_ of this phenomenon; and the name _attraction_ would
be better applied to the effect of which we have experience. In like
manner the _attraction_ and _repulsion_ of electrified bodies should be
understood, not as names for unknown causes, but as words expressing
observed appearances or effects.

When a certain phraseology has, however, gotten into general use, it
is neither easy nor convenient to supersede it. We shall, therefore,
be compelled, in speaking of motion and pressure, to use the language
of causation; but must advise the student that it is effects and not
causes which will be expressed.

(74.) If two forces act upon the same point of a body in different
directions, a single force may be assigned, which, acting on that
point, will produce the same result as the united effects of the other
two.

Let P, _fig. 7._, be the point on which the two forces act, and
let their directions be P A and P B. From the point P, upon
the line P A, take a length P _a_, consisting of as many inches
as there are ounces in the force P A; and, in like manner, take P
_b_, in the direction P B, consisting of as many inches as there
are ounces in the force P B. Through _a_ draw a line parallel to
P B, and through _b_ draw a line parallel to P A, and suppose
that these lines meet at _c_. Then draw P C. A single force,
acting in the direction P C, and consisting of as many ounces as
the line P c consists of inches, will produce upon the point P
the same effect as the two forces P A and P B produce acting
together.

(75.) The figure P _a c b_ is called in GEOMETRY a
_parallelogram_; the lines P _a_, P _b_, are called its _sides_, and
the line P _c_ is called its _diagonal_. Thus the method of finding an
equivalent for two forces, which we have just explained, is generally
called “the parallelogram of forces,” and is usually expressed thus:
“If two forces be represented in quantity and direction by the sides of
a parallelogram, an equivalent force will be represented in quantity
and direction by its diagonal.”

(76.) A single force, which is thus mechanically equivalent to two or
more other forces, is called their _resultant_, and relatively to it
they are called its _components_. In any mechanical investigation,
when the resultant is used for the components, which it always may
be, the process is called “the composition of force.” It is, however,
frequently expedient to substitute for a single force two or more
forces, to which it is mechanically equivalent, or of which it is the
resultant. This process is called “the resolution of force.”

(77.) To verify experimentally the theorem of the parallelogram
of forces is not difficult. Let two small wheels, M N,
_fig. 8._, with grooves in their edges to receive a thread, be
attached to an upright board, or to a wall. Let a thread be passed over
them, having weights A and B, hooked upon loops at its extremities.
From any part P of the thread between the wheels let a weight C be
suspended: it will draw the thread downwards, so as to form an angle
M P N, and the apparatus will settle itself at rest in some
determinate position. In this state it is evident that since the weight
C, acting in the direction P C, balances the weights A and B,
acting in the directions P M and P N, these two forces must
be mechanically equivalent to a force equal to the weight C, and acting
directly upwards from P. The weight C is therefore the quantity of the
resultant of the forces P M and P N; and the direction of the
resultant is that of a line drawn directly upwards from P.

To ascertain how far this is consistent with the theorem of “the
parallelogram of forces,” let a line P O be drawn upon the upright
board to which the wheels are attached, from the point P upward, in the
direction of the thread C P. Also, let lines be drawn upon the
board immediately under the threads P M and P N. From the
point P, on the line P O, take as many inches as there are ounces
in the weight C. Let the part of P O thus measured be P _c_, and
from _c_ draw _c a_ parallel to P N, and _c b_ parallel
to P M. If the sides P _a_ and P _b_ of the parallelogram thus
formed be measured, it will be found that P _a_ will consist of as many
inches as there are ounces in the weight A, and P _b_ of as many inches
as there are ounces in the weight B.

In this illustration, _ounces_ and _inches_ have been used as the
subdivisions of _weight_ and _length_. It is scarcely necessary to
state, that any other measures of these quantities would serve as well,
only observing that the same denominations must be preserved in all
parts of the same investigation.

(78.) Among the philosophical apparatus of the University of London,
is a very simple and convenient instrument which I constructed for
the experimental illustration of this important theorem. The wheels
M N are attached to the tops of two tall stands, the heights
of which may be varied at pleasure by an adjusting screw. A jointed
parallelogram, A B C D, _fig. 9._, is formed, whose
sides are divided into inches, and the joints at A and B are moveable,
so as to vary the lengths of the sides at pleasure. The joint C is
fixed at the extremity of a ruler, also divided into inches, while
the opposite joint A is attached to a brass loop, which surrounds the
diagonal ruler loosely, so as to slide freely along it. An adjusting
screw is provided in this loop so as to clamp it in any required
position.

In making the experiment, the sides A B and A D, C B
and C D are adjusted by the joints B and A to the same number
of inches respectively as there are ounces in the weights A and B,
_fig. 8._ Then the diagonal A C is adjusted by the loop and
screw at A, to as many inches as there are ounces in the weight C.
This done, the point A is placed behind P, _fig. 8._, and the
parallelogram is held upright, so that the diagonal A C shall be
in the direction of the vertical thread P C. The sides A B
and A D will then be found to take the direction of the threads
P M and P N. By changing the weights and the lengths of the
diagonal and sides of the parallelogram, the experiment may be easily
varied at pleasure.

(79.) In the examples of the composition of forces which we have here
given, the effects of the forces are the production of pressures, or,
to speak more correctly, the theorem which we have illustrated, is “the
composition of pressures.” For the point P is supposed to be at rest,
and to be drawn or pressed in the directions P M and P N.
In the definition which has been given of the word force, it is
declared to include motions as well as pressures. In fact, if motion be
resisted, the effect is converted into pressure. The same cause acting
upon a body, will either produce motion or pressure, according as the
body is free or restrained. If the body be free, motion ensues; if
restrained, pressure, or both these effects together. It is therefore
consistent with analogy to expect that the same theorems which regulate
pressures, will also be applicable to motions; and we find accordingly
a most exact correspondence.

(80.) If a body have a motion in the direction A B, and at the
point P it receive another motion, such as would carry it in the
direction P C, _fig. 10._, were it previously quiescent at
P, it is required to determine the direction which the body will take,
and the speed with which it will move, under these circumstances.

Let the velocity with which the body is moving from A to B be such,
that it would move through a certain space, suppose P N, in one
second of time, and let the velocity of the motion impressed upon it
at P be such, that if it had no previous motion it would move from P
to M in one second. From the point M draw a line parallel to P B,
and from N draw a line parallel to P C, and suppose these lines to
meet at some point, as O. Then draw the line P O. In consequence
of the two motions, which are at the same time impressed upon the body
at P, it will move in the straight line from P to O.

Thus the two motions, which are expressed in quantity and direction
by the sides of a parallelogram, will, when given to the same body,
produce a single motion, expressed in quantity and direction by its
diagonal; a theorem which is to motions exactly what the former was to
pressures.

There are various methods of illustrating experimentally the
composition of motion. An ivory ball, being placed upon a perfectly
level square table, at one of the corners, and receiving two equal
impulses, in the directions of the sides of the table, will move along
the diagonal. Apparatus for this experiment differ from each other only
in the way of communicating the impulses to the ball.

(81.) As two motions simultaneously communicated to a body are
equivalent to a single motion in an intermediate direction, so
also a single motion may be mechanically replaced, by two motions
in directions expressed by the sides of any parallelogram, whose
diagonal represents the single motion. This process is “the resolution
of motion,” and gives considerable clearness and facility to many
mechanical investigations.

(82.) It is frequently necessary to express the portion of a given
force, which acts in some given direction different from the
immediate direction of the force itself. Thus, if a force act from
A, _fig. 11._, in the direction A C, we may require to
estimate what part of that force acts in the direction A B. If the
force be a pressure, take as many inches A P from A, on the line
A C, as there are ounces in the force, and from P draw P M
perpendicular to A B; then the part of the force which acts along
A B will be as many ounces as there are inches in A M. The
force A B is mechanically equivalent to two forces, expressed by
the sides A M and A N of the parallelogram; but A N,
being perpendicular to A B, can have no effect on a body at A,
in the direction of A B, and therefore the effective part of the
force A P in the direction A B is expressed by A M.

(83.) Any number of forces acting on the same point of a body may
be replaced by a single force, which is mechanically equivalent to
them, and which is, therefore, their resultant. This composition may
be effected by the successive application of the parallelogram of
forces. Let the several forces be called A, B, C, D, E, &c. Draw the
parallelogram whose sides express the forces A and B, and let its
diagonal be A′. The force expressed by A′ will be equivalent to A and
B. Then draw the parallelogram whose sides express the forces A′ and
C, and let its diagonal be B′. This diagonal will express a force
mechanically equivalent to A′ and C. But A′ is mechanically equivalent
to A and B, and therefore B′ is mechanically equivalent to A, B, and
C. Next construct a parallelogram, whose sides express the forces B′
and D, and let its diagonal be C′. The force expressed by C′ will be
mechanically equivalent to the forces B′ and D; but the force B′ is
equivalent to A, B, C, and therefore C′ is equivalent to A, B, C, and
D. By continuing this process it is evident, that a single force may be
found, which will be equivalent to, and may be always substituted for,
any number of forces which act upon the same point.

If the forces which act upon the point neutralise each other, so that
no motion can ensue, they are said to be in equilibrium.

(84.) Examples of the composition of motion and pressure are
continually presenting themselves. They occur in almost every instance
of motion or force which falls under our observation. The difficulty is
to find an example which, strictly speaking, is a simple motion.

When a boat is rowed across a river, in which there is a current, it
will not move in the direction in which it is impelled by the oars.
Neither will it take the direction of the stream, but will proceed
exactly in that intermediate direction which is determined by the
composition of force.

Let A, _fig. 12._, be the place of the boat at starting; and
suppose that the oars are so worked as to impel the boat towards B
with a force which would carry it to B in one hour, if there were no
current in the river. But, on the other hand, suppose the rapidity of
the current is such, that without any exertion of the rowers the boat
would float down the stream in one hour to C. From C draw C D
parallel to A B, and draw the straight line A D diagonally.
The combined effect of the oars and the current will be, that the boat
will be carried along A D, and will arrive at the opposite bank in
one hour, at the point D.

If the object be, therefore, to reach the point B, starting from A,
the rowers must calculate, as nearly as possible, the velocity of the
current. They must imagine a certain point E at such a distance above
B that the boat would be floated by the stream from E to B in the time
taken in crossing the river in the direction A E, if there were no
current. If they row towards the point E, the boat will arrive at the
point B, moving in the line A B.

In this case the boat is impelled by two forces, that of the oars
in the direction A E, and that of the current in the direction
A C. The result will be, according to the parallelogram of forces,
a motion in the diagonal A B.

The wind and tide acting upon a vessel is a case of a similar kind.
Suppose that the wind is made to impel the vessel in the direction of
the keel; while the tide may be acting in any direction oblique to that
of the keel. The course of the vessel is determined exactly in the same
manner as that of the boat in the last example.

The action of the oars themselves, in impelling the boat, is an example
of the composition of force. Let A, _fig. 13._, be the head,
and B the stern of the boat. The boatman presents his face towards
B, and places the oars so that their blades press against the water
in the directions C E, D F. The resistance of the water
produces forces on the side of the boat, in the directions G L and
H L, which, by the composition of force, are equivalent to die
diagonal force K L, in the direction of the keel.

Similar observations will apply to almost every body impelled by
instruments projecting from its sides, and acting against a fluid. The
motions of fishes, the act of swimming, the flight of birds, are all
instances of the same kind.

(85.) The action of wind upon the sails of a vessel, and the force
thereby transmitted to the keel, modified by the rudder, is a problem
which is solved by the principles of the composition and resolution
of force; but it is of too complicated and difficult a nature to be
introduced with all its necessary conditions and limitations in this
place. The question may, however, be simplified, if we consider the
canvass of the sails to be stretched so completely as to form a plane
surface. Let A B, _fig. 14._, be the position of the sail,
and let the wind blow in the direction C D. If the line C D
be taken to express the force of the wind, let D E C F
be a parallelogram, of which it is the diagonal. The force C D is
equivalent to two forces, one in the direction F D of the plane
of the canvass, and the other E D perpendicular to the sail.
The effect, therefore, is the same as if there were _two winds_, one
blowing in the direction of F D or B A, that is against the
edge of the sail, and the other, E D, blowing full against its
face. It is evident that the former will produce no effect whatever
upon the sail, and that the latter will urge the vessel in the
direction D G.

Let us now consider this force D G as acting in the diagonal of
the parallelogram D H G I. It will be equivalent to two
forces, D H and D I, acting along the sides. One of these
forces, D H, is in the direction of the keel, and the other,
D I, at right angles to the length of the vessel, so as to urge
it _sideways_. The form of the vessel is evidently such as to offer a
great resistance to the latter force, and very little to the former.
It consequently proceeds with considerable velocity in the direction
D H of its keel, and makes way very slowly in the sideward
direction D I. The latter effect is called _lee-way_.

From this explanation it will be easily understood, how a wind which
is nearly opposed to the course of a vessel may, nevertheless, be made
to impel it by the effect of sails. The angle B D V, formed
by the sail and the direction of the keel, may be very oblique, as may
also be the angle C D B formed by the direction of the wind
and that of the sail. Therefore the angle C D V, made up of
these two, and which is that formed by the direction of the wind and
that of the keel, may be very oblique. In _fig. 15._ the wind
is nearly contrary to the direction of the keel, and yet there is an
impelling force expressed by the line D H, the line C D
expressing, as before, the whole force of the wind.

In this example there are two successive decompositions of force.
First, the original force of the wind C D is resolved into two,
E D and F D; and next the element E D, or its equal
D G, is resolved into D I and D H; so that the original
force is resolved into three, viz. F D, D I, D H,
which, taken together, are mechanically equivalent to it. The part
F D is entirely ineffectual; it glides off on the surface of the
canvass without producing any effect upon the vessel. The part D I
produces _lee-way_, and the part D H impels.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

(86.) If the wind, however, be directly contrary to the course which
it is required that the vessel should take, there is no position which
can be given to the sails which will impel the vessel. In this case
the required course itself is resolved into two, in which the vessel
sails alternately, a process which is called _tacking_. Thus, suppose
the vessel is required to move from A to E, _fig. 16._, the wind
setting from E to A. The motion A B being resolved into two, by
being assumed as the diagonal of a parallelogram, the sides A _a_, _a_
B of the parallelogram are successively sailed over, and the vessel by
this means arrives at B, instead of moving along the diagonal A B.
In the same manner she moves along B _b_, _b_ C, C _c_, _c_ D, D _d_,
_d_ E, and arrives at E. She thus sails continually at a sufficient
angle with the wind to obtain an impelling force, yet at a sufficiently
small angle to make way in her proposed course.

The consideration of the effect of the rudder, which we have omitted in
the preceding illustration, affords another instance of the resolution
of force. We shall not, however, pursue this example further.

(87.) A body falling from the top of the mast when the vessel is in
full sail, is an example of the composition of motion. It might be
expected, that during the descent of the body, the vessel having sailed
forward, would leave it behind, and that, therefore, it would fall
in the water behind the stern, or at least on the deck, considerably
behind the mast. On the other hand, it is found to fall at the foot
of the mast, exactly as it would if the vessel were not in motion. To
account for this, let A B, _fig. 17._, be the position of
the mast when the body at the top is disengaged. The mast is moving
onwards with the vessel in the direction A C, so that in the time
which the body would take to fall to the deck, the top of the mast
would move from A to C. But the body being on the mast at the moment it
is disengaged, has this motion A C in common with the mast; and
therefore in its descent it is affected by two motions, viz. that of
the vessel expressed by A C, and its descending motion expressed
by A B. Hence, by the composition of motion, it will be found
at the opposite angle D of the parallelogram, at the end of the fall.
During the fall, however, the mast has moved with the vessel, and has
advanced to C D, so that the body falls at the foot of the mast.

(88.) An instance of the composition of motion, which is worthy of
some attention, as it affords a proof of the diurnal motion of the
earth, is derived from observing the descent of a body from a very high
tower. To render the explanation of this more simple, we shall suppose
the tower to be on the equator of the earth. Let E P Q,
_fig. 18._, be a section of the earth through the equator, and
let P T be the tower. Let us suppose that the earth moves on its
axis in the direction E P Q. The foot P of the tower will,
therefore, in one day move over the circle E P Q, while the
top T moves over the greater circle T T′ R. Hence it is
evident, that the top of the tower moves with greater speed than the
foot, and therefore in the same time moves through a greater space. Now
suppose a body placed at the top; it participates in the motion which
the top of the tower has in common with the earth. If it be disengaged,
it also receives the descending motion T P. Let us suppose that
the body would take five seconds to fall from T to P, and that in the
same time the top T is moved by the rotation of the earth from T to
T′, the foot being moved from P to P′. The falling body is therefore
endued with two motions, one expressed by T T′, and the other by
T P. The combined effect of these will be found in the usual way
by the parallelogram. Take T _p_ equal to T T′; the body will
move from T to _p_ in the time of the fall, and will meet the ground
at _p_. But since T T′ is greater than P P′, it follows
that the point _p_ must be at a distance from P′ equal to the excess
of T T′ above P P′. Hence the body will not fall exactly
at the foot of the tower, but at a certain distance from it, in the
direction of the earth’s motion, that is, eastward. This is found, by
experiment, to be actually the case; and the distance from the foot of
the tower, at which the body is observed to fall, agrees with that
which is computed from the motion of the earth, to as great a degree of
exactness as could be expected from the nature of the experiment.

(89.) The properties of compounded motions cause some of the equestrian
feats exhibited at public spectacles to be performed by a kind of
exertion very different from that which the spectators generally
attribute to the performer. For example, the horseman standing on the
saddle leaps over a garter extended over the horse at right angles
to his motion; the horse passing under the garter, the rider lights
upon the saddle at the opposite side. The exertion of the performer,
in this case, is not that which he would use were he to leap from the
ground over a garter at the same height. In the latter case, he would
make an exertion to rise, and, at the same time, to project his body
forward. In the case, however, of the horseman, he merely makes that
exertion which is necessary to rise directly upwards to a sufficient
height to clear the garter. The motion which he has in common with the
horse, compounded with the elevation acquired by his muscular power,
accomplishes the leap.

To explain this more fully, let A B C, _fig. 19._, be
the direction in which the horse moves, A being the point at which
the rider quits the saddle, and C the point at which he returns to
it. Let D be the highest point which is to be cleared in the leap. At
A the rider makes a leap towards the point E, and this must be done
at such a distance from B, that he would rise from B to E in the time
in which the horse moves from A to B. On departing from A, the rider
has, therefore, two motions, represented by the lines A E and
A B, by which he will move from the point A to the opposite angle
D of the parallelogram. At D, the exertion of the leap being overcome
by the weight of his body, he begins to return downward, and would fall
from D to B in the time in which the horse moves from B to C. But at
D he still retains the motion which he had in common with the horse;
and therefore, in leaving the point D, he has two motions, expressed
by the lines D F and D B. The compounded effects of these
motions carry him from D to C. Strictly speaking, his motion from A to
D, and from D to C, is not in straight lines, but in a curve. It is not
necessary here, however, to attend to this circumstance.

(90.) If a billiard-ball strike the cushion of the table obliquely,
it will be reflected from it in a certain direction, forming an angle
with the direction in which it struck it. This affords an example of
the resolution and composition of motion. We shall first consider the
effect which would ensue if the ball struck the cushion perpendicularly.

Let A B, _fig. 20._, be the cushion, and C D the
direction in which the ball moves towards it. If the ball and the
cushion were perfectly inelastic, the resistance of the cushion would
destroy the motion of the ball, and it would be reduced to a state of
rest at D. If, on the other hand, the ball were perfectly elastic, it
would be reflected from the cushion, and would receive as much motion
from D to C after the impact, as it had from C to D before it. Perfect
elasticity, however, is a quality which is never found in these bodies.
They are always elastic, but imperfectly so. Consequently the ball
after the impact will be reflected from D towards C, but with a less
motion than that with which it approached from C to D.

Now let us suppose that the ball, instead of moving from C to D, moves
from E to D. The force with which it strikes D being expressed by
D E′, equal to E D, may be resolved into two, D F and
D C′. The resistance of the cushion destroys D C′, and the
elasticity produces a contrary force in the direction D C, but
less than D C or D C′, because that elasticity is imperfect.
The line D C expressing the force in the direction C D, let
D G (less than D C) express the reflective force in the
direction D C. The other element D F, into which the force
D E′ is resolved by the impact, is not destroyed or modified by
the cushion, and therefore, on leaving the cushion at D, the ball is
influenced by two forces, D F (which is equal to C E) and
D G. Consequently it will move in the diagonal D H.

(91.) The angle E D C is in this case called the “angle of
incidence,” and C D H is called “the angle of reflection.”
It is evident, from what has been just inferred, that the ball, being
imperfectly elastic, the angle of incidence must always be less than
the angle of reflection, and with the same obliquity of incidence,
the more imperfect the elasticity is, the less will be the angle of
reflection.

In the impact of a perfectly elastic body, the angle of reflection
would be equal to the angle of incidence. For then the line D G,
expressing the reflective force, would be taken equal to C D,
and the angle C D H would be equal to C D E. This
is found by experiment to be the case when light is reflected from a
polished surface of glass or metal.

Motion is sometimes distinguished into _absolute_ and _relative_. What
“relative motion” means is easily explained. If a man walk upon the
deck of a ship from stem to stern, he has a relative motion which is
measured by the space upon the deck over which he walks in a given
time. But while he is thus walking from stem to stern, the ship and
its contents, including himself, are impelled through the deep in
the opposite direction. If it so happen that the motion of the man,
from stem to stern, be exactly equal to the motion of the ship in the
contrary way, the man will be, relatively to the surface of the sea
and that of the earth, at rest. Thus, relatively to the ship, he is in
motion, while, relatively to the surface of the earth, he is at rest.
But still this is not absolute rest. The surface itself is moving by
the diurnal rotation of the earth upon its axis, as well as by the
annual motion in its orbit round the sun. These motions, and others to
which the earth is subject, must be all compounded by the theorem of
the parallelogram of forces before we can obtain the _absolute state_
of the body with respect to motion or rest.




CHAP. VI.

ATTRACTION.


(92.) Whatever produces, or tends to produce, a change in the state
of a particle or mass of matter with respect to motion or rest, is a
force. Rest, or uniform rectilinear motion, are therefore the only
states in which any body can exist which is not subject to the present
action of some force. We are not, however, entitled to conclude, that
because a body is observed in one or other of these states, it is
therefore uninfluenced by any forces. It may be under the immediate
action of forces which neutralise each other: thus two forces may be
acting upon it which are equal, and in opposite directions. In such
a case, its state of rest, or of uniform rectilinear motion, will be
undisturbed. The state of uniform rectilinear motion declares more with
respect to the body than the state of rest; for the former betrays the
action of a force upon the body at some antecedent period; this action
having been suspended, while its effect continues to be observed in the
motion which it has produced.

(93.) When the state of a body is changed from rest to uniform
rectilinear motion, the action of the force is only momentary, in which
case it is called an _impulse_. If a body in uniform rectilinear motion
receive an impulse in the direction in which it is moving, the effect
will be, that it will continue to move uniformly in the same direction,
but its velocity will be increased by the amount of speed which the
impulse would have given it had it been previously quiescent. Thus, if
the previous motion be at the rate of ten feet in a second, and the
impulse be such as would move it from a state of rest at five feet in
a second, the velocity, after the impulse, will be fifteen feet in a
second.

But if the impulse be received in a direction immediately opposed to
the previous motion, then it will diminish the speed by that amount of
velocity which it would give to the body had it been previously at
rest. In the example already given, if the impulse were opposed to the
previous motion, the velocity of the body after the impulse would be
five feet in a second. If the impulse received in the direction opposed
to the motion be such as would give to the body at rest a velocity
equal to that with which it is moving, then the effect will be, that
after the impulse no motion will exist; and if the impulse would give
it a still greater velocity, the body will be moved in the opposite
direction with an uniform velocity equal to the excess of that due to
the impulse over that which the body previously had.

When a body in a state of uniform motion receives an impulse in
a direction not coinciding with that of its motion, it will move
uniformly after the impulse in an intermediate direction, which may be
determined by the principles established for the composition of motion
in the last chapter.

Thus it appears, that whenever the state of a body is changed either
from rest to uniform rectilinear motion or _vice versa_, or from one
state of uniform rectilinear motion to another, differing from that
either in velocity or direction, or in both, the phenomenon is produced
by that peculiar modification of force whose action continues but for a
single instant, and which has been called _an impulse_.

(94.) In most cases, however, the mechanical state of a body is
observed to be subject to a continual change or tendency to change. We
are surrounded by innumerable examples of this. A body is placed on the
table. A continual pressure is excited on the surface of the table.
This pressure is only the consequence of the continual tendency of the
body to move downwards. If the body were excited by a force of the
nature of an impulse, the effect upon the table would be instantaneous,
and would immediately cease. It would, in fact, be _a blow_. But the
continuation of the pressure proves the continuation of the action of
the force.

If the table be removed from beneath the body, the force which excites
it being no longer resisted, will produce motion; it is manifested,
not as before, by a tendency to produce motion, but by the actual
exhibition of that phenomenon. Now if the exciting force were an
impulse, the body would descend to the ground with an uniform velocity.
On the other hand, as will hereafter appear, every moment of its fall
increases its speed, and that speed is greatest at the instant it meets
the ground.

A piece of iron placed at a distance from a magnet approaches it, but
not with an uniform velocity. The force of the magnet continues to act
during the approach of the iron, and each moment gives it increased
motion.

(95.) The forces which are thus in constant operation, proceed from
secret agencies which the human mind has never been able to detect. All
the analogies of nature prove that they are not the immediate results
of the divine will, but are secondary causes, that is, effects of
some more remote principles. To ascend to these secondary causes, and
thus as it were approach one step nearer to the Creator, is the great
business of philosophy; and the most certain means for accomplishing
this, is diligently to observe, to compare, and to classify the
phenomena, and to avoid assuming the existence of any thing which
has not either been directly observed, or which cannot be inferred
demonstratively from natural phenomena. Philosophy should follow
nature, and not lead her.

While the law of inertia, established by observation and reason,
declares the inability of matter, from any principle resident in it, to
change its state, all the phenomena of the universe prove that state
to be in constant but regular fluctuation. There is not in existence
a single instance of the phenomenon of absolute rest, or of motion
which is absolutely uniform and rectilinear. In bodies, or the parts
of bodies, there is no known instance of simple passive juxtaposition
unaccompanied by pressure or tension, or some other “tendency to
motion.” Innumerable secret powers are ever at work, compensating,
as it were, for inertia, and supplying the material world with a
substitute for the principles of action and will, which give such
immeasurable superiority to the character of life.

(96.) The forces which are thus in continual operation, whose existence
is demonstrated by their observed effects, but whose nature, seat, and
mode of operation are unknown to us, are called by the general name
_attractions_. These forces are classified according to the analogies
which prevail among their effects, in the same manner, and according
to the same principles, as organised beings are grouped in natural
history. In that department of natural science, when individuals are
distributed in classes, the object is merely to generalise, and thereby
promote the enlargement of knowledge; but nothing is or ought to be
thus assumed respecting the essence, or real internal constitution of
the individuals. According to their external and observable characters
and qualities they are classed; and this classification should never be
adduced as an evidence of any thing except that similitude of qualities
to which it owed its origin.

Phenomena are to the natural philosopher what organised beings are to
the naturalist. He groups and classifies them on the same principles,
and with a like object. And as the naturalist gives to each species a
name applicable to the individual beings which exhibit corresponding
qualities, so the philosopher gives to each force or attraction a name
corresponding to the phenomena of which it is the cause. The naturalist
is ignorant of the real essence or internal constitution of the thing
which he nominates, and of the manner in which it comes to possess or
exhibit those qualities which form the basis of his classification;
and the natural philosopher is equally ignorant of the nature, seat,
and mode of operation of the force which he assigns as the cause of an
observed class of effects.

These observations respecting the true import of the term “attraction”
seem the more necessary to be premised, because the general phraseology
of physical science, taken as language is commonly received, will seem
to convey something more. The names of the several attractions which
we shall have to notice, frequently refer the seat of the cause to
specific objects, and seem to imply something respecting its mode of
operation. Thus, when we say “the magnet attracts a piece of iron,” the
true philosophical import of the words is, “that a piece of iron placed
in the vicinity of the magnet, will move towards it, or placed in
contact, will adhere to it, so that some force is necessary to separate
them.” In the ordinary sense, however, something more than this simple
fact is implied. It is insinuated that the magnet is the seat of the
force which gives motion to the iron; that in the production of the
phenomenon, the magnet is an _agent_ exerting a certain influence, of
which the iron is the _subject_. Of all this, however, there is no
proof; on the contrary, since the magnet must move towards the iron
with just as much force as the iron moves towards the magnet, there is
as much reason to place the seat of the force in the iron, and consider
it as an agent affecting the magnet. But, in fact, the influence
which produces this phenomenon may not be resident in either the one
body or the other. It may be imagined to be a property of a medium in
which both are placed, or to arise from some third body, the presence
of which is not immediately observed. However attractive these and
like speculations may be, they cannot be allowed a place in physical
investigations, nor should consequences drawn from such hypotheses be
allowed to taint our conclusions with their uncertainty.

The student ought, therefore, to be aware, that whatever may seem
to be implied by the language used in this science in relation to
attractions, nothing is permitted to form the basis of reasoning
respecting them except _their effects_; and whatever be the common
signification of the terms used, it is to these effects, and to these
alone, they should be referred.

(97.) Attractions may be primarily distributed into two classes; one
consisting of those which exist between the molecules or constituent
parts of bodies, and the other between bodies themselves. The former
are sometimes called, for distinction, _molecular_ or _atomic_
attractions.

Without the agency of molecular forces, the whole face of nature would
be deprived of variety and beauty; the universe would be a confused
heap of material atoms dispersed through space, without form, shape,
coherence, or motion. Bodies would neither have the forms of solid,
liquid, or air; heat and light would no longer produce their wonted
effects; organised beings could not exist; life itself, as connected
with body, would be extinct. Atoms of matter, whether distant or in
juxtaposition, would have no tendency to change their places, and all
would be eternal stillness and rest. If, then, we are asked for a proof
of the existence of molecular forces, we may point to the earth and
to the heavens; we may name every object which can be seen or felt.
The whole material world is one great result of the influence of these
powerful agents.

(98.) It has been proved (11. _et seq._) that the constituent particles
of bodies are of inconceivable minuteness, and that they are not in
immediate contact (23), but separated from each other by interstitial
spaces, which, like the atoms themselves, although too small to be
directly observed, yet are incontestably proved to exist, by observable
phenomena, from which their existence demonstratively follows. The
resistance which every body opposes to compression, proves that a
repulsive influence prevails between the particles, and that this
repulsion is the cause which keeps the atoms separate, and maintains
the interstitial spaces just mentioned. Although this repulsion is
found to exist between the molecules of all substances whatever, yet
it has different degrees of energy in different bodies. This is proved
by the fact, that some substances admit of easy compression, while in
others, the exertion of considerable force is necessary to produce the
smallest diminution in bulk.

The space around each atom of a body, through which this repulsive
influence extends, is generally limited, and immediately beyond it, a
force of the opposite kind is manifested, viz. attraction. Thus, in
solid bodies, the particles resist separation as well as compression,
and the application of force is as necessary to break the body, or
divide it into separate parts, as to force its particles into closer
aggregation. It is by virtue of this attraction that solid bodies
maintain their figure, and that their parts are not separated and
scattered like those of fluids, merely by their own weight. This force
is called the _attraction of cohesion_.

The cohesive force acts in different substances with different degrees
of energy: in some its intensity is very great; but the sphere of its
influence apparently very limited. This is the case with all bodies
which are hard, strong, and brittle, which no force can extend or
stretch in any perceptible degree, and which require a great force to
break or tear them asunder. Such, for example, is cast iron, certain
stones, and various other substances. In some bodies the cohesive force
is weak, but the sphere of its action considerable. Bodies which are
easily extended, without being broken or torn asunder, furnish examples
of this. Such are Indian-rubber, or caoutchouc, several animal and
vegetable products, and, in general, all solids of a soft and viscid
kind.

Between these extremes, the cohesive force may be observed in various
degrees. In lead and other soft metals, its sphere of action is
greater, and its energy less, than in the former examples; but its
sphere less, and energy greater, than in the latter ones. It is from
the influence of this force, and that of the repulsion, whose sphere of
action is still closer to the component atoms, that all the varieties
of texture which we denominate hard, soft, tough, brittle, ductile,
pliant, &c. arise.

After having been broken, or otherwise separated, the parts of a solid
may be again united by their cohesion, provided any considerable
number of points be brought into sufficiently close contact. When this
is done by mechanical means, however, the cohesion is not so strong
as before their separation, and a comparatively small force will be
sufficient again to disunite them. Two pieces of lead freshly cut, with
smooth surfaces, will adhere when pressed together, and will require a
considerable force to separate them. In the same manner if a piece of
Indian-rubber be torn, the parts separated will again cohere, by being
brought together with a slight pressure. The union of the parts in
such instances is easy, because the sphere through which the influence
of cohesion extends is considerable; but even in bodies in which
this influence extends through a more limited space, the cohesion of
separate pieces will be manifested, provided their surfaces be highly
polished, so as to insure the near approach of a great number of their
particles. Thus, two polished surfaces of glass, metal, or stone, will
adhere when brought into contact.

In all these cases, if the bodies be disunited by mechanical force,
they will separate at exactly the parts at which they had been united,
so that after their separation no part of the one will adhere to the
other; proving that the force of cohesion of the surfaces brought into
contact is less than that which naturally held the particles of each
together.

(99.) When a body is in the liquid form, the weight of its particles
greatly predominates over their mutual cohesion, and consequently if
such a body be unconfined it will be scattered by its own weight; if
it be placed in any vessel, it will settle itself, by the force of its
weight, into the lowest parts, so that no space in the vessel below
the upper surface of the liquid will be unoccupied. The particles of
a solid body placed in the vessel have exactly the same tendency, by
reason of their weight; but this tendency is resisted and prevented
from taking effect by their strong cohesion.

Although this cohesion in solids is much greater than in liquids, and
productive of more obvious effects, yet the principle is not altogether
unobserved in liquids. Water converted into vapour by heat, is divided
into inconceivably minute particles, which ascend in the atmosphere.
When it is there deprived of a part of that heat which gave it the
vaporous form, the particles, in virtue of their cohesive force,
collect into round drops, in which form they descend to the earth.

In the same manner, if a liquid be allowed to fall gradually from the
lip of a vessel, it will not be dismissed in particles indefinitely
small, as if its mass were incoherent, like sand or powder, but will
fall in drops of considerable magnitude. In proportion as the cohesive
force is greater, these drops affect a greater size. Thus, oil and
viscid liquids fall in large drops; ether, alcohol, and others in small
ones.

Two drops of rain trickling down a window pane will coalesce when they
approach each other; and the same phenomenon is still more remarkable,
if a few drops of quicksilver be scattered on an horizontal plate of
glass.

It is the cohesive principle which gives rotundity to grains of shot:
the liquid metal is allowed to fall like rain from a great elevation.
In its descent the drops become truly globular, and before they reach
the end of their fall they are hardened by cooling, so that they retain
their shape.

It is also, probably, to the cohesive attraction that we should assign
the globular forms of all the great bodies of the universe; the sun,
planets, satellites, &c., which originally may have been in the liquid
state.

(100.) Molecular attraction is also exhibited between the particles of
liquids and solids. A drop of water will not descend freely when it
is in contact with a perpendicular glass plane: it will adhere to the
glass; its descent will be retarded; and if its weight be insufficient
to overcome the adhesive force, it will remain suspended.

If a plate of glass be placed upon the surface of water without being
permitted to sink, it will require more force to raise it from the
water than is sufficient merely to balance the weight of the glass.
This shows the adhesion of the water and glass, and also the cohesive
force with which the particles of the water resist separation.

If a needle be dipped in certain liquids, a drop will remain suspended
at its point when withdrawn from them: and, in general, when a solid
body has been immersed in a liquid and withdrawn, it is _wet_; that
is, some of the liquid has adhered to its surfaces. If no attraction
existed between the solid and liquid, the solid would be in the same
state after immersion as before. This is proved by liquids and solids
between which no attraction exists. If a piece of glass be immersed in
mercury, it will be in the same state when withdrawn as before it was
immersed. No mercury will adhere to it; it will not be _wet_.

When it rains, the person and vesture are affected only because this
attraction exists between them and water. If it rained mercury, none
would adhere to them.

(101.) When molecular attraction is exhibited by liquids pervading the
interstices of porous bodies, ascending in crevices or in the bores of
small tubes, it is called _capillary attraction_. Instances of this
are innumerable. Liquids are thus drawn into the pores of sponge,
sugar, lamp-wick, &c. The animal and vegetable kingdom furnish numerous
examples of this class of effects.

A weight being suspended by a dry rope, will be drawn upwards through
a considerable height, if the rope be moistened with a wet sponge. The
attraction of the particles composing the rope for the water is in this
case so powerful, that the tension produced by several hundred weight
cannot expel them.

A glass tube, of small bore, being dipped in water tinged by mixture
with a little ink, will retain a quantity of the liquid suspended when
withdrawn. The height of the liquid in the tube will be seen by looking
through it. It is found that the less the bore of the tube is, the
greater will be the height of the column sustained. A series of such
tubes fixed in the same frame, with their lower orifices at the same
level, and with bores gradually decreasing, being dipped in the liquid,
will exhibit columns gradually increasing.

A _capillary syphon_ is formed of a hank of cotton threads, one end of
which is immersed in the vessel containing the liquid, and the other is
carried into the vessel into which the liquid is to be transferred. The
liquid may be thus drawn from the one vessel into the other. The same
effect may be produced by a glass syphon with a small bore.

(102.) It frequently happens that a _molecular repulsion_ is exhibited
between a solid and a liquid. If a piece of wood be immersed in
quicksilver, the liquid will be depressed at that part of the surface
which is near the wood; and in like manner, if it be contained in a
glass vessel, it will be depressed at the edges. In a barometer tube,
the surface of the mercury is convex, owing partly to the repulsion
between the glass and mercury.

All solids, however, do not repel mercury. If any golden trinket be
dipped in that liquid, or even be exposed for a moment to contact
with it, the gold will be instantly intermingled with particles of
quicksilver, the metal changes its colour, and becomes white like
silver, and the mercury can only be extricated by a difficult process.
Chains, seals, rings, &c. should always be laid aside by those engaged
in experiments or other processes in which mercury is used.

(103.) Of all the forms under which molecular force is exhibited,
that in which it takes the name of _affinity_ is attended with the
most conspicuous effects. Affinity is in chemistry what inertia is
in mechanics, the basis of the science. The present treatise is not
the proper place for any detailed account of this important class
of natural phenomena. Those who seek such knowledge are referred
to our treatise on CHEMISTRY. Since, however, affinity sometimes
influences the mechanical state of bodies, and affects their mechanical
properties, it will be necessary here to state so much respecting it as
to render intelligible those references which we may have occasion to
make to such effects.

When the particles of different bodies are brought into close contact,
and more especially when, being in a fluid state, they are mixed
together, their union is frequently observed to produce a compound
body, differing in its qualities from either of the component bodies.
Thus the bulk of the compound is often greater or less than the united
volumes of the component bodies. The component bodies may be of the
ordinary temperature of the atmosphere, and yet the compound may be of
a much higher or lower temperature. The components may be liquid, and
the compound solid. The colour of the compound may bear no resemblance
whatever to that of the components. The species of molecular action
between the components, which produce these and similar, effects, is
called _affinity_.

(104.) We shall limit ourselves here to the statement of a few examples
of these phenomena.

If a pint of water and a pint of sulphuric acid be mixed, the compound
will be considerably less than a quart. The density of the mixture is,
therefore, greater than that which would result from the mere diffusion
of the particles of the one fluid through those of the other. The
particles have assumed a greater proximity, and therefore exhibit a
mutual attraction.

In this experiment, although the liquids before being mixed be of the
temperature of the surrounding air, the mixture will be so intensely
hot, that the vessel which contains it cannot be touched without pain.

If the two aeriform fluids, called oxygen and hydrogen, be mixed
together in a certain proportion, the compound will be water. In this
case, the components are different from the compound, not merely in
the one being _air_ and the other _liquid_, but in other respects
not less striking. The compound water extinguishes fire, and yet of
the components, hydrogen is one of the most inflammable substances
in nature, and the presence of oxygen is indispensably necessary to
sustain the phenomenon of combustion.

Oxygen gas, united with quicksilver, produces a compound of a black
colour, the quicksilver being white and the gas colourless. When
these substances are combined in another proportion, they give a red
compound.

(105.) Having noticed the principal molecular forces, we shall now
proceed to the consideration of those attractions which are exhibited
between bodies existing in masses. The influence of molecular
attractions is limited to insensible distances. On the contrary, the
forces which are now to be noticed act at considerable distances,
and to the influence of some there is no limit, the effect, however,
decreasing as the distance increases.

The effect of the loadstone on iron is well known, and is one of this
class of forces. For a detailed account of this force, and the various
phenomena of which it is the cause, the reader is referred to our
treatise on MAGNETISM.

When glass, wax, amber, and other substances are submitted to friction
with silken or woollen cloth, they are observed to attract feathers,
and other light bodies placed near them. A like effect is produced
in several other ways, and is attended with other phenomena, the
discussion of which forms a principal part of physical science. The
force thus exhibited is called electricity. For details respecting it,
and for its connection with magnetism, the reader is referred to our
treatises on ELECTRICITY and ELECTRO-MAGNETISM.

(106.) These attractions exist either between bodies of particular
kinds, or are developed by reducing the bodies which manifest them to
a certain state by friction, or some other means. There is, however,
an attraction, which is manifested between bodies of all species, and
under all circumstances whatever; an attraction, the intensity of which
is wholly independent of the nature of the bodies, and only depends on
their masses and mutual distances. Thus, if a mass of metal and a mass
of clay be placed in the vast abyss of space, at a mile asunder, they
will instantly commence to approach each other with certain velocities.
Again, if a mass of stone and of wood respectively equal to the former,
be placed at a like distance, they will also commence to approach
each other with the same velocities as the former. This universal
attraction, which only depends on the quantity of the masses and their
mutual distances, is called the “attraction of gravitation.” We shall
first explain the “law” of this attraction, and shall then point out
some of the principal phenomena by which its existence and its laws are
known.

(107.) The “law of gravitation” sometimes from its universality called
the “law of nature,” may be explained as follows:

Let us suppose two masses, A and B, placed beyond the influence or
attraction of any other bodies, in a state of rest, and at any proposed
distance from each other. By their mutual attraction they will approach
each other, but not with the same velocity. The velocity of A will be
greater than that of B, in the same proportion as its mass is less
than that of B. Thus, if the mass of B be twice that of A, while A
approaches B through a space of two feet, B will approach A through a
space of one foot. Hence it follows, that the force with which A moves
towards B is equal to the force with which B moves towards A (68). This
is only a consequence of the property of inertia, and is an example of
the equality of action and reaction, as explained in Chapter IV. The
velocity with which A and B approach each other is estimated by the
diminution of their distance, A B, by their mutual approach in a
given time. Thus, if in one second A move towards B through a space of
two feet, and in the same time B moves towards A through the space of
one foot, they will approach each other through a space of three feet
in a second, which will be their relative velocity (91).

If the mass of B be doubled, it will attract A with double the former
force, or, what is the same, will cause A to approach B with double the
former velocity. If the mass of B be trebled, it will attract A with
treble the first force, and, in general, while the distance A B
remains the same, the attractive force of B upon A will increase or
diminish in exactly the same proportion as the mass of B is increased
or diminished.

In the same manner, if the mass A be doubled, it will be attracted by
B with a double force, because B exerts the same degree of attraction
on every part of the mass A, and any addition which it may receive will
not diminish or otherwise affect the influence of B on its former mass.

To express this in general arithmetical symbols let _a_ and _b_ express
the space through which A and B respectively would be moved towards
each other by their mutual attraction. We would then have

  A × _a_ = B × _b_.

Thus, it is a general law of gravitation, that so long as the distance
between two bodies remains the same, each will attract and be attracted
by the other, in proportion to its mass; and any increase or decrease
of the mass will cause a corresponding increase or decrease in the
amount of the attraction.

(108.) We shall now explain the law, according to which the attraction
is changed, by changing the distance between the bodies. At the
distance of one mile the body B attracts A with a certain force. At the
distance of two miles, the masses not being changed, the attraction of
B upon A will be one-fourth of its amount at the distance of one mile.
At the distance of three miles, it will be one-ninth of its original
amount; at four miles, it is reduced to a sixteenth, and so on. The
following table exhibits the diminution of the attraction corresponding
to the successive increase of distance:

  +-----------+---+----+----+----+----+----+----+----+----+
  |Distance   | 1 | 2  | 3  | 4  | 5  | 6  | 7  | 8  | &c.|
  +-----------+---+----+----+----+----+----+----+----+----+
  |Attraction | 1 | 1/4| 1/9|1/16|1/25|1/36|1/49|1/64| &c.|
  +-----------+---+----+----+----+----+----+----+----+----+

In ARITHMETIC, that number which is found by multiplying any proposed
number by itself, is called its _square_. Thus 4, that is, 2 multiplied
by 2, is the square of 2; 9 that is, 3 times 3, is the square of 3, and
so on. On inspecting the above table, it will be apparent, therefore,
that the attraction of gravitation decreases in the same proportion as
the square of the distance from the attracting body increases, the mass
of both bodies in this case being supposed to remain the same; but if
the mass of either be increased or diminished, the attraction will be
increased or diminished in the same proportion.

(109.) Hence the _law of gravitation_ may be thus expressed: “The
mutual attraction of two bodies increases in the same proportion
as their masses are increased, and as the square of their distance
is decreased; and it decreases in proportion as their masses are
decreased, and as the square of their distance is increased.”

This law may be more clearly expressed by means of general symbols.
Let _f_ express the force with which a mass weighing 1 lb. will
attract another mass weighing 1 lb., at the distance of 1 foot.
The force with which they will mutually attract, when removed to the
distance expressed in feet by D, will be

  _f_/D^2

that is, the force _f_ divided by the square of the number D.

If one of the bodies, instead of weighing 1 lb., weigh the number
of pounds expressed by A, their mutual attraction will be increased A
times, and will therefore be expressed by

  (A × _f_)/D^2

In fine, if the other be also the number of pounds expressed by B,
their mutual attraction will be

  (A × B × _f_)/D^2

(110.) Having explained the law of gravitation, we shall now proceed to
show how the existence of this force is proved, and its law discovered.

The earth is known to be a globular mass of matter, incomparably
greater than any of the detached bodies which are found upon its
surface. If one of these bodies suspended at any proposed height
above the surface of the earth be disengaged, it will be observed to
descend perpendicularly to the earth, that is, in the direction of the
earth’s centre. The force with which it descends will also be found
to be in proportion to the mass, without any regard to the species of
the body. These circumstances are consistent with the account which
we have given of gravitation. But by that account we should expect,
that as the falling body is attracted with a certain force towards the
earth, the earth itself should be attracted towards it by the same
force; and instead of the falling body moving towards the earth, which
is the phenomenon observed, the earth and it should move towards each
other, and meet at some intermediate point. This, in fact, is the case,
although it is impossible to render the motion of the earth observable,
for reasons which will easily be understood.

Since all the bodies around us participate in this motion, it would
not be directly observable, even though its quantity were sufficiently
great to be perceived under other circumstances. But setting aside
this consideration, the space through which the earth moves in such a
case is too minute to be the subject of sensible observation. It has
been stated (107), that when two bodies attract each other, the space
through which the greater approaches the lesser, bears to that through
which the lesser approaches the greater, the same proportion as the
mass of the lesser bears to the mass of the greater. Now the mass of
the earth is more than 1000,000,000,000,000 times the mass of any body
which is observed to fall on its surface; and therefore if even the
largest body which can come under observation were to fall through an
height of 500 feet, the corresponding motion of the earth would be
through a space less than the 1000,000,000,000,000th part of 500 feet,
which is less than the 100,000,000,000th part of an inch.

The attraction between the earth and detached bodies on its surface is
not only exhibited by the descent of these bodies when unsupported,
but by their pressure when supported. This pressure is what is called
_weight_. The phenomena of weight, and the descent of heavy bodies,
will be fully investigated in the next chapter.

(111.) It is not alone by the direct fall of bodies that the
gravitation of the earth is manifested. The curvilinear motion of
bodies projected in directions different from the perpendicular, is
a combination of the effects of the uniform velocity which has been
given to the projectile by the impulse which it has received, and the
accelerated velocity which it receives from the earth’s attraction.
Suppose a body placed at any point P, _fig. 21._, above the
surface of the earth, and let P C be the direction of the earth’s
centre. If the body were allowed to move without receiving any impulse,
it would descend to the earth in the direction P A, with an
accelerated motion. But suppose that at the moment of its departure
from P, it receives an impulse in the direction P B, which would
carry it to B in the time the body would fall from P to A, then, by
the composition of motion, the body must at the end of that time be
found in the line B D, parallel to P A. If the motion in
the direction of P A were uniform, the body P would in this case
move in the straight line from P to D. But this is not the case. The
velocity of the body in the direction P A is at first so small as
to produce very little deflection of its motion from the line P B.
As the velocity, however, increases, this deflection increases, so that
it moves from P to D in a curve, which is convex, towards P B.

The greater the velocity of the projectile in the direction P A,
the greater sweep the curve will take. Thus it will successively take
the forms P D, P E, P F, &c., and that velocity can be
computed, which (setting aside the resistance of the air) would cause
the projectile to go completely round the earth, and return to the
point P from which it departed. In this case, the body P would continue
to revolve round the earth like the moon. Hence it is obvious, that the
phenomenon of the revolution of the moon round the earth, is nothing
more than the combined effects of the earth’s attraction, and the
impulse which it received when launched into space by the hand of its
Creator.

(112.) This is a great step in the analysis of the phenomenon of
gravitation. We have thus reduced to the same class two effects
apparently very dissimilar, the rectilinear descent of a heavy body,
and the nearly circular revolution of the moon round the earth. Hence
we are conducted to a generalisation still more extensive.

As the moon’s revolution round the earth, in an orbit nearly circular,
is caused by the combination of the earth’s attraction, and an original
projectile impulse, so also the singular phenomena of the planets’
revolution round the sun in orbits nearly circular, must be considered
an effect of the same class, as well as the revolution of the
satellites of those planets which are attended by such bodies. Although
the orbits in which the comets move deviate very much from circles, yet
this does not hinder the application of the same principle to them,
their deviation from circles not depending on the sun’s attraction, but
only on the direction and force of the original impulse which put them
in motion.

(113.) We therefore conclude that gravitation is the principle
which, as it were, animates the universe. All the great changes and
revolutions of the bodies which compose our system, can be traced
to or derived from this principle. It still remains to show how
that remarkable law, by which this force is declared to increase or
decrease in the same proportion as the square of the distance from
the attracting body is decreased or increased, may be verified and
established.

It has been shown, that the curvilinear path of a projectile
depends on, and can be derived, by mathematical reasoning, from the
consideration of the intensity of the earth’s attraction, and the
force of the original impulse, or the velocity of projection. In the
same manner, by a reverse process, when we know the curve in which a
projectile moves, we can infer the amount of the attracting force which
gives the curvature to its path. In this way, from our knowledge of the
curvature of the moon’s orbit, and the velocity with which she moves,
the intensity of the attraction which the earth exerts upon her can be
exactly ascertained. Upon comparing this with the force of gravitation
at the earth’s surface, it is found that the latter is as many times
greater than the former, as the square of the moon’s distance is
greater than the square of the distance of a body on the surface of the
earth from its centre.

(114.) If this were the only fact which could be brought to establish
the law of gravitation, it might be thought to be an accidental
relation, not necessarily characterising the attraction of gravitation.
Upon examining the orbits and velocities of the several planets, the
same result is, however, obtained. It is found that the forces with
which they are severally attracted by the sun are great, in exactly the
same proportion as the squares of the several numbers expressing their
distances are small. The mutual gravitation of bodies on the surface of
the earth towards each other is lost in the predominating force exerted
by the earth upon all of them. Nevertheless, in some cases, this effect
has not only been observed, but actually measured.

A plumb-line, under ordinary circumstances, hangs in a direction truly
vertical; but if it be near a large mass of matter, as a mountain,
it has been observed to be deflected from the true vertical, towards
the mountain. This effect was observed by Dr. Maskeline near the
mountain called Skehallien, in Scotland, and by French astronomers near
Chimboraco. For particulars of these observations, see our treatise on
GEODÆSY.

Cavendish succeeded in exhibiting the effects of the mutual gravitation
of metallic spheres. Two globes of lead A, B, each about a foot in
diameter, were placed at a certain distance asunder. A light rod,
to the ends of which were attached small metallic balls C, D, was
suspended at its centre E from a fine wire, and the rod was placed
as in _fig. 22._, so that the attractions of each of the leaden
globes had a tendency to turn the rod round the centre E in the same
direction. A manifest effect was produced upon the balls C, D, by the
gravitation of the spheres. In this experiment, care must be taken that
no magnetic substance is intermixed with the materials of the balls.

Having so far stated the principles on which the law of gravitation is
established, we shall dismiss this subject without further details,
since it more properly belongs to the subject of PHYSICAL ASTRONOMY; to
which we refer the reader for a complete demonstration of the law, and
for the detailed development of its various and important consequences.




CHAP. VII.

TERRESTRIAL GRAVITY.


(115.) GRAVITATION is the general name given to this attraction, by
whatever masses of matter it may be manifested. As exhibited in the
effects produced by the earth upon surrounding bodies, it is called
“terrestrial gravity.”

As the attraction of the earth is directed towards its centre, it might
be expected that two plumb-lines should appear not to be parallel, but
so inclined to each other as to converge to a point under the surface
of the earth. Thus, if A B and C D, _fig. 23._, be two
plumb-lines, each will be directed to the centre O, where, if their
directions were continued, they would meet. In like manner, if two
bodies were allowed to fall from A and C, they would descend in the
directions A B and C D, which converge to O. Observation,
on the contrary, shows, that plumb-lines suspended in places not far
distant from each other are truly parallel; and that bodies allowed
to fall descend in parallel lines. This apparent parallelism of the
direction of terrestrial gravity is accounted for by the enormous
proportion which the magnitude of the earth bears to the distance
between the two plumb-lines or the two falling bodies which are
compared. If the distance between the places B, D, were 1200 feet, the
inclination of the lines A B and C D would not amount to a
quarter of a minute, or the 240th part of a degree. But the distance,
in cases where the parallelism is assumed, is never greater than, and
seldom so great as, a few yards; and hence the inclination of the
directions A B and C D is too small to be appreciated by any
practical measure. In the investigation of the phenomena of falling
bodies, we shall, therefore, assume, that all the particles of the
same body are attracted in parallel directions, perpendicular to an
horizontal plane.

(116.) Since the intensity of terrestrial gravity increases as the
square of the distance decreases, it might be expected that, as a
falling body approaches the earth, the force which accelerates it
should be continually increasing, and, strictly speaking, it is so. But
any height through which we observe falling bodies to descend bears so
very small a proportion to the whole distance from the centre, that
the change of intensity of the force of gravity is quite beyond any
practical means of estimating it. The radius, or the distance from
the surface of the earth to its centre, is 4000 miles. Now, suppose
a body descended through the height of half a mile, a distance very
much beyond those used in experimental enquiries, the distances from
the centre, at the beginning and end of the fall, are then in the
proportion of 8000 to 8001, and therefore the proportion of the force
of attraction at the commencement to the force at the end, being that
of the squares of these numbers, is 64,000,000 to 64,016,001, which, in
the whole descent, is an increase of about one part in 4000; a quantity
practically insignificant. We shall, therefore, in explaining the laws
of falling bodies, assume that, in the entire descent, the body is
urged by a force of uniform intensity.

Although the force which attracts all parts of the same body during
its descent in a given place is the same, yet the force of gravity,
at different parts of the earth’s surface, has different intensities.
The intensity diminishes with the latitude, so that it is greater
towards the poles, and lesser towards the equator. The causes of
this variation, its law, and the experimental proofs of it, will be
explained, when we shall treat of centrifugal force, and the motion of
pendulums. It is sufficient merely to advert to it in this place.

(117.) Since the earth’s attraction acts separately and equally on
every particle of matter, without regard to the nature or species of
the body, it follows that all bodies, of whatever kind, or whatever
be their masses, must be moved with the same velocity. If two equal
particles of matter be placed at a certain distance above the surface
of the earth, they will fall in parallel lines, and with exactly the
same speed, because the earth attracts them equally. In the same
manner, a thousand particles would fall with equal velocities. Now,
these circumstances will in no wise be changed if those 1000 particles,
instead of existing separately, be aggregated into two solid masses,
one consisting of 990 particles, and the other of 10. We shall thus
have a heavy body and a light one, and, according to our reasoning,
they must fall to the earth with the same speed.

Common experience, however, is not always consistent with this
doctrine. What are called light substances, as feathers, gold-leaf,
paper, &c., are observed to fall slowly and irregularly, while
heavier masses, as solid pieces of metal, stones, &c., fall rapidly.
Nay, there are not a few instances in which the earth, instead of
attracting bodies, seems to repel them, as in the case of smoke,
vapours, balloons, and other substances which actually ascend. We are
to consider that the mass of the earth is not the only agent engaged in
these phenomena. The earth is surrounded by an atmosphere composed of
an elastic or aeriform fluid. This atmosphere has certain properties,
which will be explained in our treatise on PNEUMATICS, and which are
the causes of the anomalous circumstances alluded to. Light bodies
rise in the atmosphere, for the same reason that a piece of cork rises
from the bottom of a vessel of water; and other light bodies fall more
slowly than heavy ones, for the same reason that an egg in water falls
to the bottom more slowly than a leaden bullet. This treatise is not
the place to give a direct explanation of these phenomena. It will
be sufficient for our present purpose to show, that if there were no
atmosphere, all bodies, heavy and light, would fall at the same rate.
This may easily be accomplished by the aid of an air-pump. Having
by that instrument abstracted the air from a tall glass vessel, we
are enabled, by means of a wire passing air-tight through a hole in
the top, to let fall several bodies from the top of the vessel to the
bottom. These, whether they be feathers, paper, gold-leaf, pieces of
money, &c. all descend with the same speed, and strike the bottom at
the same moment.

(118.) Every one who has seen a heavy body fall from a height, has
witnessed the fact, that its velocity increases as it approaches
the ground. But if this were not observable by the eye, it would be
betrayed by the effects. It is well known, that the force with which a
body strikes the ground increases with the height from whence it has
fallen. This force, however, is proportional to the velocity which it
has at the moment it meets the ground, and therefore this velocity
increases with the height.

When the observations on attraction in the last chapter are well
understood, it will be evident that the velocity which a body has
acquired in falling from any height, is the accumulated effects of the
attraction of terrestrial gravity during the whole time of the fall.
Each instant of the fall a new impulse is given to the body, from which
it receives additional velocity; and its final velocity is composed
of the aggregation of all the small increments of velocity which are
thus communicated. As we are at present to suppose the intensity of the
attraction invariable, it will follow that the velocity communicated to
the body in each instant of time will be the same, and therefore that
the whole quantity of velocity produced or accumulated at the end of
any time is proportional to the length of that time. Thus, if a certain
velocity be produced in a body having fallen for one second, twice that
velocity will be produced when it has fallen for two seconds, thrice
that velocity in three seconds, and so on. Such is the fundamental
principle or characteristic of _uniformly accelerated motion_.

(119.) In examining the circumstances of the descent of a body, the
time of the fall and the velocity at each instant of that time are not
the only things to be attended to. The spaces through which it falls in
given intervals of time, counted either from the commencement of its
fall, or from any proposed epoch of the descent, are equally important
objects of enquiry. To estimate the space in reference to the time and
the final velocity, we must consider that this space has been moved
through with varying speed. From a state of rest at the beginning of
the fall, the speed gradually increases with the time, and the final
velocity is greater still than that which the body had at any preceding
instant during its descent. We cannot, therefore, _directly_ appreciate
the space moved through in this case by the time and final velocity.
But as the velocity increases uniformly with the time, we shall obtain
the average speed, by finding that which the body had in the middle of
the interval which elapsed between the beginning and end of the fall,
and thus the space through which the body has actually fallen is that
through which it would move in the same time with this average velocity
uniformly continued.

But since the velocity which the body receives in any time, counted
from the beginning of its descent, is in the proportion of that time,
it follows that the velocity of the body after half the whole time of
descent is half the final velocity. From whence it appears, that the
height from which a body falls in any proposed time is equal to the
space through which a body would move in the same time with half the
final velocity, and it is therefore equal to half the space which would
be moved through in the same time with the final velocity.

(120.) It follows from this reasoning, that between the three
quantities, the height, the time, and the final velocity, which enter
into the investigation of the phenomena of falling bodies, there are
two fixed relations: _First_, the time, counted from the beginning of
the fall and the final velocity, are proportional the one to the other;
so that as one increases, the other increases in the same proportion.
_Secondly_, the height being equal to half the space which would be
moved through in the _time_ of the fall, with the _final velocity_,
must have a fixed proportion to these two quantities, viz. the _time_
and the _final velocity_, or must be proportional to the product of the
two numbers which express them.

But since the time is always proportional to the final velocity, they
may be expressed by equal numbers, and the product of equal numbers
is the square of either of them. Hence, the product of the numbers
expressing the time and final velocity is equivalent to the square
of the number expressing the time, or to the square of the number
expressing the final velocity. Hence we infer, that the height is
always proportional to the square of the time of the fall, or to the
square of the final velocity.

(121.) The use of a few mathematical characters will render these
results more distinct, even to students not conversant with
mathematical science.

Let S = the height from which the body falls, expressed in feet.

    V = the velocity at the end of the fall in feet per second.

    T = the number of seconds in the time of the fall.

   _g_ = the number of feet through which a body would fall in one
           second.

It will therefore follow that the velocity acquired in one second will
be 2_g_, and the velocity acquired in T seconds will therefore be 2_g_
× T; so that

  V = 2_g_ × T        [1]

Since the space which a body falls through in T seconds is found by
multiplying the space it falls through in one second by T^2, we shall
have

  S = _g_ × T^2       [2]

from which, combined with [1] we deduce

  S = V^2/(4_g_)      [3]

  S = (1/2)V × T      [4]

By these formularies, if the height through which a body falls freely
in one second be known, the height through which it will fall in any
proposed time may be computed. For since the height is proportional
to the square of the time, the height through which it will fall in
_two_ seconds will be _four_ times that which it falls through in
_one_ second. In _three_ seconds it will fall through _nine_ times
that space; in _four_ seconds, _sixteen_ times; in _five_ seconds,
_twenty-five_ times, and so on. The following, therefore, is a general
rule to find the height through which a body will fall in any given
time: “Reduce the given time to seconds, take the square of the number
of seconds in it, and multiply the height through which a body falls in
one second by that number; the result will be the height sought.”

The following table exhibits the heights and corresponding times as far
as 10 seconds:

  +-------+---+---+---+----+----+----+----+----+----+-----+
  |Time   | 1 | 2 | 3 |  4 |  5 |  6 |  7 |  8 |  9 |  10 |
  +-------+---+---+---+----+----+----+----+----+----+-----+
  |Height | 1 | 4 | 9 | 16 | 25 | 36 | 49 | 64 | 81 | 100 |
  +-------+---+---+---+----+----+----+----+----+----+-----+

Each unit in the numbers of the first row expresses a second of time,
and each unit in those of the second row expresses the height through
which a body falls freely in a second.

(122.) If a body fall continually for several successive seconds,
the spaces which it falls through in each succeeding second have a
remarkable relation among each other, which may be easily deduced from
the preceding table. Taking the space moved through in the first second
still as our unit, four times that space will be moved through in the
first two seconds. Subtract from this 1, the space moved through in the
first second, and the remainder 3 is the space through which the body
falls in the _second_ second. In like manner if 4, the height fallen
through in the first two seconds, be subtracted from 9, the height
fallen through in the first three seconds, the remainder 5 will be the
space fallen through in the third second. To find the space fallen
through in the fourth second, subtract 9, the space fallen through in
the first three seconds, from 16, the space fallen through in the first
four seconds, and the result is 7, and so on. It thus appears that if
the space fallen through in the first second be called 1, the spaces
described in the second, third, fourth, fifth, &c. seconds, will be
expressed by the odd numbers respectively, 3, 5, 7, 9, &c. This places
in a striking point of view the accelerated motion of a falling body,
the spaces moved through in each succeeding second being continually
increased.

(123.) If velocity be estimated by the space through which the body
would move uniformly in one second, then the final velocity of a body
falling for one second will be 2; for with that final velocity the body
would in one second move through twice the height through which it has
fallen.

(124.) Since the final velocity increases in the same proportion as
the time, it follows that after two seconds it is twice its amount
after one, and after three seconds thrice that, and so on. Thus, the
following table exhibits the final velocities corresponding to the
times of descent:

  +---------------+---+---+---+---+----+----+----+----+----+----+
  |Time           | 1 | 2 | 3 | 4 |  5 |  6 |  7 |  8 |  9 | 10 |
  +---------------+---+---+---+---+----+----+----+----+----+----+
  |Final velocity | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 |
  +---------------+---+---+---+---+----+----+----+----+----+----+

The numbers in the second row express the spaces through which a body
with the final velocity would move in one second, the unit being, as
usual, the space through which a body falls freely in one second.

(125.) Having thus developed theoretically the laws which characterise
the descent of bodies, falling freely by the force of gravity, or by
any other uniform force of the same kind, it is necessary that we
should show how these laws can be exhibited by actual experiment.
There are some circumstances attending the fall of heavy bodies which
would render it difficult, if not impossible, to illustrate, by the
direct observation of this phenomenon, the properties which have
been explained in this chapter. A body falling freely by the force
of gravity, as we shall hereafter prove, descends in one second of
time through a height of about 16 feet[1]; in two seconds, it would,
therefore, fall through four times that space, or 64 feet; in three
seconds, through 9 times the height, or 144 feet; and in four seconds,
through 256 feet. In order, therefore, to be enabled to observe the
phenomena for only four seconds, we should command an height of at
least 256 feet. But further; the velocity at the end of the first
second would be at the rate of 32 feet per second; at the end of the
second second, it would be 64 feet per second; and towards the end of
the fall it would be about 120 feet per second. It is evident that this
great degree of rapidity would be a serious impediment to accurate
observation, even though we should be able to command the requisite
height. It appears therefore that the number expressed by _g_ in the
preceding formulæ is 16·083.

[1] More exactly through 16-1/12 feet, or 193 inches.

It occurred to Mr. George Attwood, a mathematician and natural
philosopher of the last century, that all the phenomena of falling
bodies might be experimentally exhibited and accurately observed, if
a force of the same kind as gravity, viz. an uniformly accelerating
force, be used, but of a much less intensity; so that while the motion
continues to be governed by the same laws, its quantity may be so much
diminished, that the final velocity, even after a descent of many
seconds, shall be so moderated as to admit of most deliberate and exact
observation. This being once accomplished, nothing more would remain
but to find the height through which a body would fall in one second,
or, what is the same, the proportion of the force of gravity to the
mitigated but uniform accelerating force thus substituted for it.

(126.) To realise this notion, Attwood constructed a wheel turning on
its axle with very little friction, and having a groove on its edge
to receive a string. Over this wheel, and in the groove, he placed a
fine silken cord, to the ends of which were attached equal cylindrical
weights. Thus placed, the weights perfectly balance each other, and no
motion ensues. To one of the weights he then added a small quantity, so
as to give it a slight preponderance. The loaded weight now began to
descend, drawing up on the other side the unloaded weight. The descent
of the loaded weight, under these circumstances, is a motion exactly
of the _same kind_ as the descent of a heavy body falling freely by
the force of gravity; that is, it increases according to the same
laws, though at a very diminished rate. To explain this, suppose that
the loaded weight descends from a state of rest through one inch in
a second, it will descend through 4 inches in two seconds, through 9
in three, through 16 in four, and so on. Thus in 20 seconds, it would
descend through 400 inches, or 33 feet 4 inches, a height which, if it
were necessary, could easily be commanded.

It might, perhaps, be thought, that since the weights suspended at the
ends of the thread are in equilibrium, and therefore have no tendency
either to move or to resist motion, the additional weight placed upon
one of them ought to descend as rapidly as it would if it were allowed
to fall freely and unconnected with them. It is very true that this
weight will receive from the attraction of the earth the same force
when placed upon one of the suspended weights, as it would if it were
disengaged from them; but in the consequences which ensue, there is
this difference. If it were unconnected with the suspended weights,
the whole force impressed upon it would be expended in accelerating
its descent; but being connected with the equal weights which sustain
each other in equilibrium, by the silken cord passing over the wheel,
the force which is impressed upon the added weight is expended, not
as before, in giving velocity to the added weight alone, but to it
together with the two equal weights appended to the string, one of
which descends with the added weight, and the other rises on the
opposite side of the wheel. Hence, setting aside any effect which the
wheel itself produces, the velocity of the descent must be lessened
just in proportion as the mass among which the impressed force is to
be distributed is increased; and therefore the _rate_ of the fall
bears to that of a body falling freely the same proportion as the added
weight bears to the sum of the masses of the equal suspended weights
and the added weight. Thus the smaller the added weight is, and the
greater the equal suspended weights are, the slower will the rate of
descent be.

To render the circumstances of the fall conveniently observable, a
vertical shaft (see _fig. 24._) is usually provided, which is
placed behind the descending weight. This pillar is divided to inches
and halves, and of course may be still more minutely graduated, if
necessary. A stage to receive the falling weight is moveable on this
pillar, and capable of being fixed in any proposed position by an
adjusting screw. A pendulum vibrating seconds, the beat of which ought
to be very audible, is placed near the observer. The loaded weight
being thus allowed to descend for any proposed time, or from any
required height, all the circumstances of the descent may be accurately
observed, and the several laws already explained in this chapter may be
experimentally verified.

(127.) The laws which govern the descent of bodies by gravity, being
reversed, will be applicable to the ascent of bodies projected upwards.
If a body be projected directly upwards with any given velocity, it
will rise to the height from which it should have fallen to acquire
that velocity. The earth’s attraction will, in this case, gradually
deprive the body of the velocity which is communicated to it at the
moment at which it is projected. Consequently, the phenomenon will be
that of _retarded motion_. At each part of its ascent it will have the
same velocity which it would have if it descended to the same place
from the highest point to which it rises. Hence it is clear, that all
the particulars relative to the ascent of bodies may be immediately
inferred from those of their descent, and therefore this subject
demands no further notice.

To complete the investigation of the phenomena of falling bodies, it
would now only remain to explain the method of ascertaining the exact
height through which a body would descend in one second, if unresisted
by the atmosphere, or any other disturbing cause. As the solution
of this problem, however, requires the aid of principles not yet
explained, it must for the present be postponed.




CHAP. VIII.

OF THE MOTION OF BODIES ON INCLINED PLANES AND CURVES.


(128.) In the last chapter, we investigated the phenomena of bodies
descending freely in the vertical direction, and determined the laws
which govern, not their motion alone, but that of bodies urged by any
uniformly accelerating force whatever. We shall now consider some of
the most ordinary cases in which the free descent of bodies is impeded,
and the effects of their gravitation modified.

(129.) If a body, urged by any forces whatever, be placed upon a
hard unyielding surface, it will evidently remain at rest, if the
resultant (76) of all the forces which are applied to it be directed
perpendicularly against the surface. In this case, the effect produced
is pressure, but no motion ensues. If only one force act upon the
body, it will remain at rest, provided the direction of that force be
perpendicular to the surface.

But the effect will be different, if the resultant of the forces which
are applied to the body be oblique to the surface. In that case this
resultant, which, for simplicity, may be taken as a single force, may
be considered as mechanically equivalent to two forces (76), one in the
direction of the surface, and the other perpendicular to it. The latter
element will be resisted, and will produce a pressure; the former will
cause the body to move. This will perhaps be more clearly apprehended
by the aid of a diagram.

Let A B, _fig. 25._, be the surface, and let P be a particle
of matter placed upon it, and urged by a force in the direction
P D, perpendicular to A B. It is manifest, that this force
can only press the particle P against A B, but cannot give it any
motion.

But let us suppose, that the force which urges P is in a direction
P F, oblique to A B. Taking P F as the diagonal of a
parallelogram, whose sides are P D and P C (74), the force
P F is mechanically equivalent to two forces, expressed by the
lines P D and P C. But P D, being perpendicular to
A B, produces pressure without motion, and P C, being in
the direction of A B, produces motion without pressure. Thus
the effect of the force P F is distributed between motion and
pressure in a certain proportion, which depends on the obliquity of
its direction to that of the surface. The two extreme cases are, 1.
When it is in the direction of the surface; it then produces motion
without pressure: and, 2. When it is perpendicular to the surface; it
then produces pressure without motion. In all intermediate directions,
however, it will produce both these effects.

(130.) It will be very apparent, that the more oblique the direction
of the force P F is to A B, the greater will be that part
of it which produces motion, and the less will be that which produces
pressure. This will be evident by inspecting _fig. 26._ In this
figure the line P F, which represents the force, is equal to
P F in _fig. 25._ But P D, which expresses the pressure,
is less in _fig. 26._ than in _fig. 25._, while P C,
which expresses the motion, is greater. So long, then, as the obliquity
of the directions of the surface and the force remain unchanged, so
long will the distribution of the force between motion and pressure
remain the same; and therefore, if the force itself remain the same,
the parts of it which produce motion and pressure will be respectively
equal.

(131.) These general principles being understood, no difficulty can
arise in applying them to the motion of bodies urged on inclined planes
or curves by the force of gravity. If a body be placed on an unyielding
horizontal plane, it will remain at rest, producing a pressure on the
plane equal to the total amount of its weight. For in this case the
force which urges the body, being that of terrestrial gravity, its
direction is vertical, and therefore perpendicular to the horizontal
plane.

But if the body P, _fig. 25._, be placed upon a plane A B,
oblique to the direction of the force of gravity, then, according to
what has been proved (129), the weight of the body will be distributed
into two parts, P C and P D; one, P D, producing a
pressure on the plane A B, and the other, P C, producing
motion down the plane. Since the obliquity of the perpendicular
direction P F of the weight to that of the plane A B must be
the same on whatever part of the plane the weight may be placed, it
follows (130), that the proportion P C of the weight which urges
the body down the plane must be the same throughout its whole descent.

(132.) Hence it may easily be inferred, that the force down the
plane is uniform; for since the weight of the body P is always the
same, and since its proportion to that part which urges it down the
plane is the same, it follows that the quantity of this part cannot
vary. The motion of a heavy body down an inclined plane is therefore
an uniformly-accelerated motion, and is characterised by all the
properties of uniformly-accelerated motion, explained in the last
chapter.

Since P F represents the force of gravity, that is, the force
with which the body would descend freely in the vertical direction,
and P C the force with which it moves down the plane, it follows
that a body would fall freely in the vertical direction from P to F
in the same time as on the plane it would move from P to C. In this
manner, therefore, when the height through which a body would fall
vertically is known, the space through which it would descend in the
same time down any given inclined plane may be immediately determined.
For let A B, _fig. 25._, be the given inclined plane, and let
P F be the space through which the body would fall in one second.
From F draw F C perpendicular to the plane, and the space P C
is that through which the body P will fall in one second on the plane.

(133.) As the angle B A H, which measures the elevation
of the plane, is increased, the obliquity of the vertical direction
P F with the plane is also increased. Consequently, according to
what has been proved (130), it follows, that as the elevation of the
plane is increased, the force which urges the body down the plane is
also increased, and as the elevation is diminished, the force suffers a
corresponding diminution. The two extreme cases are, 1. When the plane
is raised until it becomes perpendicular, in which case the weight is
permitted to fall freely, without exerting any pressure upon the plane;
and, 2. When the plane is depressed until it becomes horizontal, in
which case the whole weight is supported, and there is no motion.

From these circumstances it follows, that by means of an inclined plane
we can obtain an uniformly-accelerating force of any magnitude less
than that of gravity.

We have here omitted, and shall for the present in every instance
omit, the effects of _friction_, by which the motion down the plane
is retarded. Having first investigated the mechanical properties of
bodies supposed to be free from friction, we shall consider friction
separately, and show how the present results are modified by it.

(134.) The accelerating forces on different inclined planes may be
compared by the principle explained in (131). Let _figs. 25._
and _26._ be two inclined planes, and take the lines P F in each
figure equal, both expressing the force of gravity, then P C will
be the force which in each case urges the body down the plane.

As the force down an inclined plane is less than that which urges a
body falling freely in the vertical direction, the space through which
the body must fall to attain a certain final velocity must be just so
much greater as the accelerating force is less. On this principle we
shall be able to determine the final velocity in descending through any
space on a plane, compared with the final velocity attained in falling
freely in the vertical direction. Suppose the body P, _fig. 27._,
placed at the top of the plane, and from H draw the perpendicular
H C. If B H represent the force of gravity, B C will
represent the force down the plane (131). In order that the body
moving down the plane shall have a final velocity equal to that of
one which has fallen freely from B to H, it will be necessary that it
should move from B down the plane, through a space which bears the same
proportion to B H as B H does to B C. But since the
triangle A B H is in all respects similar to H B C,
only made upon a larger scale, the line A B bears the same
proportion to B H as B H bears to B C. Hence, in falling
on the inclined plane from B to A, the final velocity is the same as in
falling freely from B to H.

It is evident that the same will be true at whatever level an
horizontal line be drawn. Thus, if I K be horizontal, the final
velocity in falling on the plane from B to I will be the same as the
final velocity in falling freely from B to K.

(135.) The motion of a heavy body down a curve differs in an important
respect from the motion down an inclined plane. Every part of the
plane being equally inclined to the vertical direction, the effect of
gravity in the direction of the plane is uniform; and, consequently,
the phenomena obey all the established laws of uniformly-accelerated
motion. If, however, we suppose the line B A, on which the
body P descends, to be curved as in _fig. 28._, the obliquity
of its direction at different parts, to the direction P F of
gravity, will evidently vary. In the present instance, this obliquity
is greater towards B and less towards A, and hence the part of the
force of gravity which gives motion to the body is greater towards
B than towards A (130). The force, therefore, which urges the body,
instead of being uniform as in the inclined plane, is here gradually
diminished. The rate of this diminution depends entirely on the nature
of the curve, and can be deduced from the properties of the curve by
mathematical reasoning. The details of such an investigation are not,
however, of a sufficiently elementary character to allow of being
introduced with advantage into this treatise. We must therefore limit
ourselves to explain such of the results as may be necessary for the
development of the other parts of the science.

(136.) When a heavy body is moved down an inclined plane by the force
of gravity, the plane has been proved to sustain a pressure, arising
from a certain part of the weight P D, _fig. 25._, which
acts perpendicularly to the plane. This is also the case in moving
down a curve such as B A, _fig. 28._ In this case, also, the
whole weight is distributed between that part which is directed down
the curve, and that which, being perpendicular to the curve, produces
a pressure upon it. There is, however, another cause which produces
pressure upon the curve, and which has no operation in the case of
the inclined plane. By the property of inertia, when a body is put in
motion in any direction, it must persevere in that direction, unless
it be deflected from it by an efficient force. In the motion down an
inclined plane the direction is never changed, and therefore by its
inertia the falling body retains all the motion impressed upon it
continually in the same direction; but when it descends upon a curve,
its direction is constantly varying, and the resistance of the curve
being the deflecting cause, the curve must sustain a pressure equal to
that force, which would thus be capable of continually deflecting the
body from the rectilinear path in which it would move in virtue of its
inertia. This pressure entirely depends on the curvature of the path
in which the body is constrained to move, and on its inertia, and is
therefore altogether independent of the weight, and would, in fact,
exist if the weight were without effect.

(137.) This pressure has been denominated _centrifugal force_, because
it evinces a tendency of the moving body to _fly from_ the centre of
the curve in which it is moved. Its quantity depends conjointly on the
velocity of the motion and the curvature of the path through which
the body is moved. As circles may be described with every degree of
curvature, according to the length of the radius, or the distance from
their circumference to their centre, it follows that, whatever be the
curve in which the body moves, a circle can always be assigned which
has the same curvature as is found at any proposed point of the given
curve. Such a circle is called “the circle of curvature” at that point
of the curve; and as all curves, except the circle, vary their degrees
of curvature at different points, it follows that different parts of
the same curve will have different circles of curvature. It is evident
that the greater the radius of a circle is, the less is its curvature:
thus the circle with the radius A B, _fig. 29._, is more
curved than that whose radius is C D, and that in the exact
proportion of the radius C D to the radius A B. The radius of
the circle of curvature for any part of a curve is called “the radius
of curvature” of that part.

(138.) The centrifugal pressure increases as the radius of curvature
increases; but it also has a dependence on the velocity with which the
moving body swings round the centre of the circle of curvature. This
velocity is estimated either by the actual space through which the body
moves, or by the _angular velocity_ of a line drawn from the centre of
the circle to the moving body. That body carries one end of this line
with it, while the other remains fixed at the centre. As this angular
swing round the centre increases, the centrifugal pressure increases.
To estimate the rate at which this pressure in general varies, it is
necessary to multiply the square of the number expressing the angular
velocity by that which expresses the radius of curvature, and the force
increases in the same proportion as the product thus obtained.

(139.) We have observed that the same causes which produce pressure
on a body restrained, will produce motion if the body be free.
Accordingly, if a body be moved by any efficient cause in a curve, it
will, by reason of the centrifugal force, _fly off_, and the moving
force with which it will thus retreat from the centre round which
it is whirled will be a measure of the centrifugal force. Upon this
principle an apparatus called a _whirling table_ has been constructed,
for the purpose of exhibiting experimental illustrations of the laws
of centrifugal force. By this machine we are enabled to place any
proposed weights at any given distances from centres round which they
are whirled, either with the same angular velocity, or with velocities
having a certain proportion. Threads attached to the whirling weights
are carried to the centres round which they respectively revolve, and
there, passing over pulleys, are connected with weights which may be
varied at pleasure. When the whirling weights fly from their respective
centres, by reason of the centrifugal force, they draw up the weights
attached to the other ends of the threads, and the amount of the
centrifugal force is estimated by the weight which it is capable of
raising.

With this instrument the following experiments may be exhibited:--

Exp. 1. Equal weights whirled with the same velocity at equal distances
from the centre raise the same weight, and therefore have the same
centrifugal force.

Exp. 2. Equal weights whirled with the same angular velocity at
distances from the centre in the proportion of one to two, will raise
weights in the same proportion. Therefore the centrifugal forces are in
that proportion.

Exp. 3. Equal weights whirled at equal distances with angular
velocities which are as one to two, will raise weights as one to four,
that is, as the squares of the angular velocities. Therefore the
centrifugal forces are in that proportion.

Exp. 4. Equal weights whirled at distances which are as two to three,
with angular velocities which are as one to two, will raise weights
which are as two to twelve; that is, as the products of the distances
two and three, and the squares one and four, of the angular velocities.
Hence, the centrifugal forces are in this proportion.

The centrifugal force must also increase as the mass of the body moved
increases; for, like attraction, each particle of the moving body is
separately and equally affected by it. Hence a double mass, moving
at the same distance, and with the same velocity, will have a double
force. The following experiment verifies this:--

Exp. 5. If weights, which are as one to two, be whirled at equal
distances with the same velocity, they will raise weights which are as
one to two.

The law which governs centrifugal force may then be expressed in
general symbols briefly thus:--

Let _c_ = the centrifugal force with which a weight of one lb.
revolving in a circle in one second, the radius of which is one foot,
would act on a string connecting it with the centre. The force with
which it would act on a string, the length of which is R feet, would
be _c_ × R; and if instead of revolving in one second it revolved in T
seconds, the force would be

  (_c_ × R)/T^2;

and if the revolving mass were W lbs. the force would be

  C = (_c_ × W × R)/T^2.

This formula includes the entire theory of centrifugal force.

But it can be shown that the number expressed by _c_ is 1·226, and
consequently

  C = (1·226 × W × R)/T^2.

It is often more convenient to use the number of revolutions made in
a given time than the time of one revolution. Let N then express the
number of revolutions, or fraction of a revolution, made in one second,
and we shall have

  T = 1/N.

Therefore

  C = 1·226 × W × R × N^2.

(140.) The consideration of centrifugal force proves, that if a body
be observed to move in a curvilinear path, some efficient cause must
exist which prevents it from flying off, and which compels it to
revolve round the centre. If the body be connected with the centre by
a thread, cord, or rod, then the effect of the centrifugal force is
to give tension to the thread, cord, or rod. If an unyielding curved
surface be placed on the convex side of the path, then the force will
produce pressure on this surface. But if a body is observed to move
in a curve without any visible material connection with its centre,
and without any obstruction on the convex side of its path to resist
its retreat, as is the case with the motions of the planets round
the sun, and the satellites round the planets, it is usual to assign
the cause to the attraction of the body which occupies the centre:
in the present instance the sun is that body, and it is customary to
say that the _attraction_ of the sun, neutralising the effects of the
centrifugal force of the planets, _retains them_ in their orbits. We
have elsewhere animadverted on the inaccurate and unphilosophical style
of this phraseology, in which terms are admitted which intimate not
only an unknown cause, but assign its seat, and intimate something of
its nature. All that we are entitled to declare in this case is, that
a motion is continually impressed upon the planet; that this motion is
directed towards the sun; that it counteracts the centrifugal force;
but from whence this motion proceeds, whether it be a virtue resident
in the sun, or a property of the medium or space in which both sun and
planets are placed, or whatever other influence may be its proximate
cause, we are altogether ignorant.

       *       *       *       *       *

(141.) Numerous examples of the effects of centrifugal force may be
produced.

If a stone or other weight be placed in a sling, which is whirled round
by the hand in a direction perpendicular to the ground, the stone will
not fall out of the sling, even when it is at the top of its circuit,
and, consequently, has no support beneath it. The centrifugal force, in
this case, acting from the hand, which is the centre of rotation, is
greater than the weight of the body, and therefore prevents its fall.

In like manner, a glass of water may be whirled so rapidly that even
when the mouth of the glass is presented downwards, the water will
still be retained in it by the centrifugal force.

If a bucket of water be suspended by a number of threads, and these
threads be twisted by turning round the bucket many times in the same
direction, on allowing the cords to untwist, the bucket will be whirled
rapidly round, and the water will be observed to rise on its sides and
sink at its centre, owing to the centrifugal force with which it is
driven from the centre. This effect might be carried so far, that all
the water would flow over and leave the bucket nearly empty.

(142.) A carriage, or horseman, or pedestrian, passing a corner moves
in a curve, and suffers a centrifugal force, which increases with
the velocity, and which impresses on the body a force directed from
the corner. An animal causes its weight to resist this force, by
voluntarily inclining its body towards the corner. In this case, let
A B, _fig. 30._, be the body; C D is the direction of
the weight perpendicular to the ground, and C F is the direction
of the centrifugal force parallel to the ground and _from_ the corner.
The body A B is inclined to the corner, so that the diagonal force
(74), which is mechanically equivalent to the weight and centrifugal
force, shall be in the direction C A, and shall therefore produce
the pressure of the feet upon the ground.

As the velocity is increased, the centrifugal force is also increased,
and therefore a greater inclination of the body is necessary to resist
it. We accordingly find that the more rapidly a corner is turned, the
more the animal inclines his body towards it.

A carriage, however, not having voluntary motion, cannot make this
compensation for the disturbing force which is called into existence
by the gradual change of direction of the motion; consequently it
will, under certain circumstances, be overturned, falling of course
outwards, or _from_ the corner. If A B be the carriage, and
C, _fig. 31._, the place at which the weight is principally
collected, this point C will be under the influence of two forces: the
weight, which may be represented by the perpendicular C D, and the
centrifugal force, which will be represented by a line C F, which
shall have the same proportion to C D as the centrifugal force
has to the weight. Now the combined effect of these two forces will be
the same as the effect of a single force, represented by C G.
Thus, the pressure of the carriage on the road is brought nearer to the
outer wheel B. If the centrifugal force bear the same proportion to the
weight as C F (or D B), _fig. 32._, bears to C D,
the whole pressure is thrown upon the wheel B.

If the centrifugal force bear to the weight a greater proportion than
D B has to C D, then the line C F, which represents it,
_fig. 33._, will be greater than D B. The diagonal C G,
which represents the combined effects of the weight and centrifugal
force, will in this case pass outside the wheel B, and therefore this
resultant will be unresisted. To perceive how far it will tend to
overturn the carriage, let the force C G be resolved into two, one
in the direction of C B, and the other C K, perpendicular to
C B. The former C B will be resisted by the road, but the
latter C K will tend to lift the carriage over the external wheel.
If the velocity and the curvature of the course be continued for a
sufficient time to enable this force C K to elevate the weight,
so that the line of direction shall fall on B, the carriage will be
overthrown.

It is evident from what has been now stated, that the chances of
overthrow under these circumstances depend on the proportion of
B D to C D, or what is to the same purpose, of the distance
between the wheels to the height of the principal seat of the load.
It will be shown in the next chapter, that there is a certain point,
called the centre of gravity, at which the entire weight of the vehicle
and its load may be conceived to be concentrated. This is the point
which in the present investigation we have marked C. The security of
the carriage, therefore, depends on the greatness of the distance
between the wheels and the smallness of the elevation of the centre of
gravity above the road; for either or both of these circumstances will
increase the proportion of B D to C D.

(143.) In the equestrian feat exhibited in the ring at the
amphitheatre, when the horse moves round with the performer standing on
the saddle, both the horse and rider incline continually towards the
centre of the ring, and the inclination increases with the velocity of
the motion: by this inclination their weights counteract the effect
of the centrifugal force, exactly as in the case already mentioned
(142.)

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

(144.) If a body be allowed to fall by its weight down a convex
surface, such as A B, _fig. 34._, it would continue upon the
surface until it arrive at B but for the effect of the centrifugal
force: this, giving it a motion from the centre of the curve, will
cause it to quit the curve at a certain point C, which can be easily
found by mathematical computation.

(145.) The most remarkable and important manifestation of centrifugal
force is observed in the effects produced by the rotation of the earth
upon its axis. Let the circle in _fig. 35._ represent a section
of the earth, A B being the axis on which it revolves. This
rotation causes the matter which composes the mass of the earth to
revolve in circles round the different points of the axis as centres
at the various distances at which the component parts of this mass
are placed. As they all revolve with the same angular velocity, they
will be affected by centrifugal forces, which will be greater or less
in proportion as their distances from the centre are greater or less.
Consequently the parts of the earth which are situated about the
equator, D, will be more strongly affected by centrifugal force than
those about the poles, A B. The effect of this difference has been
that the component matter about the equator has actually been driven
farther from the centre than that about the poles, so that the figure
of the earth has swelled out at the sides, and appears proportionally
depressed at the top and bottom, resembling the shape of an orange. An
exaggerated representation of this figure is given in _fig. 36._;
the real difference between the distances of the poles and equator
from the centre being too small to be perceptible in a diagram. The
exact proportion of C A to C D has never yet been certainly
ascertained. Some observations make C D exceed C A by 1/277,
and others by only 1/333. The latter, however, seems the more probable.
It may be considered to be included between these limits.

The same cause operates more powerfully in other planets which revolve
more rapidly on their axes. Jupiter and Saturn have forms which are
considerably more elliptical.

(146.) The centrifugal force of the earth’s rotation also affects
detached bodies on its surface. If such bodies were not held upon the
surface by the earth’s attraction, they would be immediately flung
off by the whirling motion in which they participate. The centrifugal
force, however, really diminishes the effects of the earth’s attraction
on those bodies, or, what is the same, diminishes their weights. If
the earth did not revolve on its axis, the weight of bodies in all
places equally distant from the centre would be the same; but this is
not so when the bodies, as they do, move round with the earth. They
acquire from the centrifugal force a tendency to fly from the axis,
which increases with their distance from that axis, and is therefore
greater the nearer they are to the equator, and less as they approach
the pole. But there is another reason why the centrifugal force is more
efficient, in the opposition which it gives to gravity near the equator
than near the poles. This force does not act from the centre of the
earth, but is directed from the earth’s axis. It is, therefore, not
directly opposed to gravity, except on the equator itself. On leaving
the equator, and proceeding towards the poles, it is less and less
opposed to gravity, as will be plain on inspecting _fig. 35._,
where the lines P C all represent the direction of gravity, and
the lines P F represent the direction of the centrifugal force.

Since, then, as we proceed from the equator towards the poles, not only
the amount of the centrifugal force is continually diminished, but also
it acts less and less in opposition to gravity, it follows that the
weights of bodies are most diminished by it at the equator, and less so
towards the poles.

Since bodies are commonly weighed by balancing them against other
bodies of known weight, it may be asked, how the phenomena we have been
just describing can be ascertained as a matter of fact? for whatever
be the body against which it may be balanced, that body must suffer
just as much diminution of weight as every other, and consequently, all
being diminished in the same proportion, the balance will be preserved
though the weights be changed.

To render this effect observable, it will be necessary to compare the
effects of gravity with some phenomenon which is not affected by the
centrifugal force of the earth’s rotation, and which will be the same
at every part of the earth. The means of accomplishing this will be
explained in a subsequent chapter.




CHAP. IX.

THE CENTRE OF GRAVITY.


(147.) By the earth’s attraction, all the particles which compose
the mass of a body are solicited by equal forces in parallel
directions downwards. If these component particles were placed in mere
juxtaposition, without any mechanical connection, the force impressed
on any one of them could in nowise affect the others, and the mass
would, in such a case, be contemplated as an aggregation of small
particles of matter, each urged by an independent force. But the bodies
which are the subjects of investigation in mechanical science are not
found in this state. Solid bodies are coherent masses, the particles
of which are firmly bound together, so that any force which affects
one, being modified according to circumstances, will be transmitted
through the whole body. Liquids accommodate themselves to the shape of
the surfaces on which they rest, and forces affecting any one part are
transmitted to others, in a manner depending on the peculiar properties
of this class of bodies.

As all bodies, which are subjects of mechanical enquiry, on the surface
of the earth, must be continually influenced by terrestrial gravity,
it is desirable to obtain some easy and summary method of estimating
the effect of this force. To consider it, as is unavoidable in the
first instance, the combined action of an infinite number of equal and
parallel forces soliciting the elementary molecules downwards, would
be attended with manifest inconvenience. An infinite number of forces,
and an infinite subdivision of the mass, would form parts of every
mechanical problem.

To overcome this difficulty, and to obtain all the ease and simplicity
which can be desired in elementary investigations, it is only necessary
to determine some force, whose single effect shall be equivalent to the
combined effects of the gravitation of all the molecules of the body.
If this can be accomplished, that single force might be introduced into
all problems to represent the whole effect of the earth’s attraction,
and no regard need be had to any particles of the body, except that on
which this force acts.

(148.) To discover such a force, if it exist, we shall first enquire
what properties must necessarily characterise it. Let A B,
_fig. 37._, be a solid body placed near the surface of the
earth. Its particles are all solicited downwards, in the directions
represented by the arrows. Now, if there be any single force equivalent
to these combined effects, two properties may be at once assigned to
it: 1. It must be presented downwards, in the common direction of
those forces to which it is mechanically equivalent; and, 2. it must
be equal in intensity to their sum, or, what is the same, to the force
with which the whole mass would descend. We shall then suppose it to
have this intensity, and to have the direction of the arrow D E.
Now, if the single force, in the direction D E, be equivalent
to all the separate attractions which affect the particles, we may
suppose all these attractions removed, and the body A B influenced
only by a single attraction, acting in the direction D E. This
being admitted, it follows that if the body be placed upon a prop,
immediately under the direction of the line D E, or be suspended
from a fixed point immediately above its direction, it will remain
motionless. For the whole attracting force in the direction D E
will, in the one case, press the body on the prop, and, in the other
case, will give tension to the cord, rod, or whatever other means of
suspension be used.

(149.) But suppose the body were suspended from some point P, not in
the direction of the line D E. Let P C be the direction of
the thread by which the body is suspended. Its whole weight, according
to the supposition which we have adopted, must then act in the
direction C E. Taking C F to represent the weight; it may be
considered as mechanically equivalent to two forces (74), C I and
C H. Of these C H, acting directly from the point P, merely
produces pressure upon it, and gives tension to the cord P C; but
C I, acting at right angles to C P, produces motion round P
as a centre, and in the direction C I, towards a vertical line
P G, drawn through the point P. If the body A B had been on
the other side of the line P G, it would have moved in like manner
towards it, and therefore in the direction contrary to its present
motion.

Hence we must infer, that when the body is suspended from a fixed
point, it cannot remain at rest, if that fixed point be not placed in
the direction of the line D E; and, on the other hand, that if
the fixed point _be_ in the direction of that line, it cannot move. A
practical test is thus suggested, by which the line D E may be at
once discovered. Let a thread be attached to any point of the body, and
let it be suspended by this thread from a hook or other fixed point.
The direction of the thread, when the body becomes quiescent, will
be that of a single force equivalent to the gravitation of all the
component parts of the mass.

(150.) An enquiry is here suggested: does the direction of the
equivalent force thus determined depend on the position of the body
with respect to the surface of the earth, and how is the direction
of the equivalent force affected by a change in that position? This
question may be at once solved if the body be suspended by different
points, and the directions which the suspending thread takes in each
case relatively to the figure and dimensions of the body examined.

The body being suspended in this manner from any point, let a small
hole be bored through it, in the exact direction of the thread, so that
if the thread were continued below the point where it is attached to
the body, it would pass through this hole. The body being successively
suspended by several different points on its surface, let as many small
holes be bored through it in the same manner. If the body be then cut
through, so as to discover the directions which the several holes have
taken, they will be all found to cross each other at one point within
the body; or the same fact may be discovered thus: a thin wire, which
nearly fills the holes being passed through any one of them, it will be
found to intercept the passage of a similar wire through any other.

This singular fact teaches us, what indeed can be proved by
mathematical reasoning without experiment, that there is _one_ point in
every body through which the single force, which is equivalent to the
gravitation of all its particles, must pass, in whatever position the
body be placed. This point is called _the centre of gravity_.

(151.) In whatever situation a body may be placed, the centre of
gravity will have a tendency to descend in the direction of a
line perpendicular to the horizon, and which is called the _line
of direction_ of the weight. If the body be altogether free and
unrestricted by any resistance or impediment, the centre of gravity
will actually descend in this direction, and all the other points of
the body will move with the same velocity in parallel directions,
so that during its fall the position of the parts of the body, with
respect to the ground, will be unaltered. But if the body, as is most
usual, be subject to some resistance or restraint, it will either
remain unmoved, its weight being expended in exciting pressure on the
restraining points or surfaces, or it will move in a direction and
with a velocity depending on the circumstances which restrain it.

In order to determine these effects, to predict the pressure produced
by the weight if the body be quiescent, or the mixed effects of motion
and pressure, if it be not so, it is necessary in all cases to be
able to assign the place of the centre of gravity. When the magnitude
and figure of the body, and the density of the matter which occupies
its dimensions, are known, the place of the centre of gravity can be
determined with the greatest precision by mathematical calculation.
The process by which this is accomplished, however, is not of a
sufficiently elementary nature to be properly introduced into this
treatise. To render it intelligible would require the aid of some
of the most advanced analytical principles; and even to express the
position of the point in question, except in very particular instances,
would be impossible, without the aid of peculiar symbols.

(152.) There are certain particular forms of body in which, when they
are uniformly dense, the place of the centre of gravity can be easily
assigned, and proved by reasoning, which is generally intelligible;
but in all cases whatever, this point may be easily determined by
experiment.

(153.) If a body uniformly dense have such a shape that a point may be
found on either side of which in all directions around it the materials
of the body are similarly distributed, that point will obviously be
the centre of gravity. For if it be supported, the gravitation of the
particles on one side drawing them downwards, is resisted by an effect
of exactly the same kind and of equal amount on the opposite side, and
so the body remains balanced on the point.

The most remarkable body of this kind is a globe, the centre of which
is evidently its centre of gravity.

A figure, such as _fig. 38._, called an _oblate spheroid_, has its
centre of gravity at its centre, C. Such is the figure of the earth.
The same may be observed of the elliptical solid, _fig. 39._,
which is called a prolate spheroid.

A cube, and some other regular solids, bounded by plane surfaces, have
a point within them, such as above described, and which is, therefore,
their centre of gravity. Such are _fig. 40._

A straight wand of uniform thickness has its centre of gravity at the
centre of its length; and a cylindrical body has its centre of gravity
in its centre, at the middle of its length or axis. Such is the point
C, _fig. 41._

A flat plate of any uniform substance, and which has in every part
an equal thickness, has its centre of gravity at the middle of its
thickness, and under a point of its surface, which is to be determined
by its shape. If it be circular or elliptical, this point is its
centre. If it have any regular form, bounded by straight edges, it is
that point which is equally distant from its several angles, as C in
_fig. 42._

(154.) There are some cases in which, although the place of the centre
of gravity is not so obvious as in the examples just given, still
it may be discovered without any mathematical process, which is not
easily understood. Suppose A B C, _fig. 43._, to be
a flat triangular plate of uniform thickness and density. Let it be
imagined to be divided into narrow bars, by lines parallel to the side
A C, as represented in the figure. Draw B D from the angle
B to the middle point D of the side A C. It is not difficult to
perceive, that B D will divide equally all the bars into which the
triangle is conceived to be divided. Now if the flat triangular plate
A B C be placed in a horizontal position on a straight edge
coinciding with the line B D, it will be balanced: for the bars
parallel to A C will be severally balanced by the edge immediately
under their middle point; since that middle point is the centre of
gravity of each bar. Since, then, the triangle is balanced on the edge,
the centre of gravity must be somewhere immediately over it, and must,
therefore, be within the plate at some point under the line B D.

The same reasoning will prove that the centre of gravity of the plate
is under the line A E, drawn from the angle A to the middle
point E of the side B C. To perceive this, it is only necessary
to consider the triangle divided into bars parallel to B C,
and thence to show that it will be balanced on an edge placed under
A E. Since then the centre of gravity of the plate is under the
line B D, and also under A E, it must be under the point G,
at which these lines cross each other; and it is accordingly at a depth
beneath G, equal to half the thickness of the plate.

This may be experimentally verified by taking a piece of tin or card,
and cutting it into a triangular form. The point G being found by
drawing B D and A E, which divide two sides equally, it will
be balanced if placed upon the point of a pin at G.

The centre of gravity of a triangle being thus determined, we shall
be able to find the position of the centre of gravity of any plate of
uniform thickness and density which is bounded by straight edges, as
will be shown hereafter. (173.)

(155.) The centre of gravity is not always included within the volume
of the body, that is, it is not enclosed by its surfaces. Numerous
examples of this can be produced. If a piece of wire be bent into any
form, the centre of gravity will rarely be in the wire. Suppose it be
brought to the form of a ring. In that case, the centre of gravity of
the wire will be the centre of the circle, a point not forming any
part of the wire itself: nevertheless this point may be proved to have
the characteristic property of the centre of gravity; for if the ring
be suspended by any point, the centre of the ring must always settle
itself under the point of suspension. If this centre could be supposed
to be connected with the ring by very fine threads, whose weight would
be insignificant, and which might be united by a knot or otherwise at
the centre, the ring would be balanced upon a point placed under the
knot.

In like manner, if the wire be formed into an ellipse, or any other
curve similarly arranged round a centre point, that point will be its
centre of gravity.

(156.) To find the centre of gravity experimentally, the method
described in (149, 150) may be used. In this case two points of
suspension will be sufficient to determine it; for the directions of
the suspending cord being continued through the body, will cross each
other at the centre of gravity. These directions may also be found
by placing the body on a sharp point, and adjusting it so as to be
balanced upon it. In this case a line drawn through the body directly
upwards from the point will pass through the centre of gravity, and
therefore two such lines must cross at that point.

(157.) If the body have two flat parallel surfaces like sheet metal,
stiff paper, card, board, &c., the centre of gravity may be found by
balancing the body in two positions on an horizontal straight edge.
The point where the lines marked by the edge cross each other will
be immediately under the centre of gravity. This may be verified by
showing that the body will be balanced on a point thus placed, or that
if it be suspended, the point thus determined will always come under
the point of suspension.

The position of the centre of gravity of such bodies may also be found
by placing the body on an horizontal table having a straight edge.
The body being moved beyond the edge until it is in that position in
which the slightest disturbance will cause it to fall, the centre of
gravity will then be immediately over the edge. This being done in two
positions, the centre of gravity will be determined as before.

(158.) It has been already stated, that when the body is perfectly
free, the centre of gravity must necessarily move downwards, in a
direction perpendicular to an horizontal plane. When the body is not
free, the circumstances which restrain it generally permit the centre
of gravity to move in certain directions, but obstruct its motion in
others. Thus if a body be suspended from a fixed point by a flexible
cord, the centre of gravity is free to move in every direction except
those which would carry it farther from the point of suspension than
the length of the cord. Hence if we conceive a globe or sphere to
surround the point of suspension on every side to a distance equal to
that of the centre of gravity from the point of suspension, when the
cord is fully stretched, the centre of gravity will be at liberty to
move in every direction within this sphere.

There are an infinite variety of circumstances under which the motion
of a body may be restrained, and in which a most important and useful
class of mechanical problems originate. Before we notice others,
we shall, however, examine that which has just been described more
particularly.

Let P, _fig. 44._, be the point of suspension, and C the centre
of gravity, and suppose the body so placed that C shall be within the
sphere already described. The cord will therefore be slackened, and in
this state the body will be free. The centre of gravity will therefore
descend in the perpendicular direction until the cord becomes fully
extended; the tension will then prevent its further motion in the
perpendicular direction. The downward force must now be considered as
the diagonal of a parallelogram, and equivalent to two forces C D
and C E, in the directions of the sides, as already explained in
(149). The force C D will bring the centre of gravity into the
direction P F, perpendicularly under the point of suspension.
Since the force of gravity acts continually on C in its approach to
P F, it will move towards that line with accelerated speed, and
when it has arrived there it will have acquired a force to which no
obstruction is immediately opposed, and consequently by its inertia
it retains this force, and moves beyond P F on the other side.
But when the point C gets into the line P F, it is in the lowest
possible position; for it is at the lowest point of the sphere which
limits its motion. When it passes to the other side of P F, it
must therefore begin to ascend, and the force of gravity, which, in the
former case, accelerated its descent, will now for the same reason, and
with equal energy, oppose its ascent. This will be easily understood.
Let C′ be any point which it may have attained in ascending;
C′ G′, the force of gravity, is now equivalent to C′ D′ and
C′ E′. The latter as before produces tension; but the former
C′ D′ is in a direction immediately opposed to the motion, and
therefore retards it. This retardation will continue until all the
motion acquired by the body in its descent from the first position
has been destroyed, and then it will begin to return to P F, and
so it will continue to vibrate from the one side to the other until
the friction on the point P, and the resistance of the air, gradually
deprive it of its motion, and bring it to a state of rest in the
direction P F.

But for the effects of friction and atmospheric resistance, the body
would continue for ever to oscillate equally from side to side of the
line P F.

(159.) The phenomenon just developed is only an example of an extensive
class. Whenever the circumstances which restrain the body are of such
a nature that the centre of gravity is prevented from descending below
a certain level, but not, on the other hand, restrained from rising
above it, the body will remain at rest if the centre of gravity be
placed at the lowest limit of its level; any disturbance will cause
it to oscillate around this state, and it cannot return to a state of
rest until friction or some other cause have deprived it of the motion
communicated by the disturbing force.

(160.) Under the circumstances which we have just described, the body
could not maintain itself in a state of rest in any position except
that in which the centre of gravity is, at the lowest point of the
space in which it is free to move. This, however, is not always the
case. Suppose it were suspended by an inflexible rod instead of a
flexible string; the centre of gravity would then not only be prevented
from receding from the point of suspension, but also from approaching
it; in fact, it would be always kept at the same distance from it.
Thus, instead of being capable of moving anywhere within the sphere,
it is now capable of moving on its surface only. The reasoning used in
the last case may also be applied here, to prove that when the centre
of gravity is on either side of the perpendicular P F, it will
fall towards P F and oscillate, and that if it be placed in the
line P F, it will remain in equilibrium. But in this case there is
another position, in which the centre of gravity may be placed so as to
produce equilibrium. If it be placed at the highest point of the sphere
in which it moves, the whole force acting on it will then be directed
on the point of suspension, perpendicularly downwards, and will be
entirely expended in producing pressure on that point; consequently,
the body will in this case be in equilibrium. But this state of
equilibrium is of a character very different from that in which the
centre of gravity was at the lowest part of the sphere. In the present
case any displacement, however slight, of the centre of gravity, will
carry it to a lower level, and the force of gravity will then prevent
its return to its former state, and will impel it downwards until it
attain the lowest point of the sphere, and round that point it will
oscillate.

(161.) The two states of equilibrium which have been just noticed, are
called stable and instable equilibrium. The character of the former is,
that any disturbance of the state produces oscillation about it; but
any disturbance of the latter state produces a total overthrow, and
finally causes oscillation around the state of stable equilibrium.

Let A B, _fig. 45._, be an elliptical board resting on
its edge on an horizontal plane. In the position here represented,
the extremity P of the lesser axis being the point of support, the
board is in stable equilibrium; for any motion on either side must
cause the centre of gravity C to ascend in the directions C O,
and oscillation will ensue. If, however, it rest upon the smaller
end, as in _fig. 46._, the position would still be a state of
equilibrium, because the centre of gravity is directly above the point
of support; but it would be instable equilibrium, because the slightest
displacement of the centre of gravity would cause it to descend.

Thus an egg or a lemon may be balanced on the end, but the least
disturbance will overthrow it. On the contrary, it will easily rest on
the side, and any disturbance will produce oscillation.

(162.) When the circumstances under which the body is placed allow the
centre of gravity to move only in an horizontal line, the body is in a
state which may be called _neutral equilibrium_. The slightest force
will move the centre of gravity, but will neither produce oscillation
nor overthrow the body, as in the last two cases.

An example of this state is furnished by a cylinder placed upon an
horizontal plane. As the cylinder is rolled upon the plane, the centre
of gravity C, _fig. 47._, moves in a line parallel to the plane
A B, and distant from it by the radius of the cylinder. The body
will thus rest indifferently in any position, because the line of
direction always falls upon a point P at which the body rests upon the
plane.

If the plane were inclined, as in _fig. 48._, a body might be
so shaped, that while it would roll the centre of gravity would move
horizontally. In this case the body would rest indifferently on any
part of the plane, as if it were horizontal, provided the friction be
sufficient to prevent the body from sliding down the plane.

If the centre of gravity of a cylinder happen not to coincide with
its centre by reason of the want of uniformity in the materials of
which it is composed, it will not be in a state of neutral equilibrium
on an horizontal plane, as in _fig. 47._ In this case let G,
_fig. 49._, be the centre of gravity. In the position here
represented, where the centre of gravity is immediately _below_ the
centre C, the state will be stable equilibrium, because a motion
on either side would cause the centre of gravity to ascend; but in
_fig. 50._, where G is immediately above C, the state is instable
equilibrium, because a motion on either side would cause G to descend,
and the body would turn into the position _fig. 49._

(163.) A cylinder of this kind will, under certain circumstances, roll
up an inclined plane. Let A B, _fig. 51._, be the inclined
plane, and let the cylinder be so placed that the line of direction
from G shall be _above_ the point P at which the cylinder rests upon
the plane. The whole weight of the body acting in the direction
G D will obviously cause the cylinder to roll towards A, provided
the friction be sufficient to prevent sliding; but although the
cylinder in this case ascends, the centre of gravity G really descends.

When G is so placed that the line of direction G D shall fall on
the point P, the cylinder will be in equilibrium, because its weight
acts upon the point on which it rests. There are two cases represented
in _fig. 52._ and _fig. 53._, in which G takes this position.
_Fig. 52._ represents the state of stable, and _fig. 53._ of
instable equilibrium.

(164.) When a body is placed upon a base, its stability depends upon
the position of the line of direction and the height of the centre of
gravity above the base. If the line of direction fall within the base,
the body will stand firm; if it fall on the edge of the base, it will
be in a state in which the slightest force will overthrow it on that
side at which the line of direction falls; and if the line of direction
fall without the base, the body must turn over that edge which is
nearest to the line of direction.

In _fig. 54._ and _fig. 55._, the line of direction G P
falls within the base, and it is obvious that the body will stand firm;
for any attempt to turn it over either edge would cause the centre of
gravity to ascend. But in _fig. 56._ the line of direction falls
upon the edge, and if the body be turned over, the centre of gravity
immediately commences to descend. Until it be turned over, however, the
centre of gravity is supported by the edge.

In _fig. 57._ the line of direction falls outside the base, the
centre of gravity has a tendency to descend from G towards A, and the
body will accordingly fall in that direction.

(165.) When the line of direction falls within the base, bodies will
always stand firm, but not with the same degree of stability. In
general, the stability depends on the height through which the centre
of gravity must be elevated before the body can be overthrown. The
greater this height is, the greater in the same proportion will be the
stability.

Let B A C, _fig. 58._, be a pyramid, the centre of
gravity being at G. To turn this over the edge B, the centre of
gravity; must be carried over the arch G E, and must therefore
be raised through the height H E. If, however, the pyramid were
taller relatively to its base, as in _fig. 59._, the height
H E would be proportionally less; and if the base were very small
in reference to the height, as in _fig. 60._, the height H E
would be very small, and a slight force would throw it over the edge B.

It is obvious that the same observations may be applied to all figures
whatever, the conclusions just deduced depending only on the distance
of the line of direction from the edge of the base, and the height of
the centre of gravity above it.

(166.) Hence we may perceive the principle on which the stability of
loaded carriages depends. When the load is placed at a considerable
elevation above the wheels, the centre of gravity is elevated, and the
carriage becomes proportionally insecure. In coaches for the conveyance
of passengers, the luggage is therefore sometimes placed below the body
of the coach; light parcels of large bulk may be placed on the top with
impunity.

When the centre of gravity of a carriage is much elevated, there is
considerable danger of overthrow, if a corner be turned sharply and
with a rapid pace; for the centrifugal force then acting on the centre
of gravity will easily raise it through the small height which is
necessary to turn the carriage over the external wheels (142).

(167.) The same waggon will have greater stability when loaded with
a heavy substance which occupies a small space, such as metal, than
when it carries the same weight of a lighter substance, such as hay;
because the centre of gravity in the latter case will be much more
elevated.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

If a large table be placed upon a single leg in its centre, it will
be impracticable to make it stand firm; but if the pillar on which it
rests terminate in a tripod, it will have the same stability as if it
had three legs attached to the points directly over the places where
the feet of the tripod rest.

(168.) When a solid body is supported by more points than one, it is
not necessary for its stability that the line of direction should fall
on one of those points. If there be only two points of support, the
line of direction must fall between them. The body is in this case
supported as effectually as if it rested on an edge coinciding with a
straight line drawn from one point of support to the other. If there
be three points of support, which are not ranged in the same straight
line, the body will be supported in the same manner as it would be by
a base coinciding with the triangle formed by straight lines joining
the three points of support. In the same manner, whatever be the
number of points on which the body may rest, its virtual base will be
found by supposing straight lines drawn, joining the several points
successively. When the line of direction falls within this base, the
body will always stand firm, and otherwise not. The degree of stability
is determined in the same manner as if the base were a continued
surface.

(169.) Necessity and experience teach an animal to adapt its postures
and motions to the position of the centre of gravity of his body. When
a man stands, the line of direction of his weight must fall within the
base formed by his feet. If A B, C D, _fig. 61._, be the
feet, this base is the space A B D C. It is evident,
that the more his toes are turned outwards, the more contracted the
base will be in the direction E F, and the more liable he will be
to fall backwards or forwards. Also, the closer his feet are together,
the more contracted the base will be in the direction G H, and the
more liable he will be to fall towards either side.

When a man walks, the legs are alternately lifted from the ground, and
the centre of gravity is either unsupported or thrown from the one
side to the other. The body is also thrown a little forward, in order
that the tendency of the centre of gravity to fall in the direction of
the toes may assist the muscular action in propelling the body. This
forward inclination of the body increases with the speed of the motion.

But for the flexibility of the knee-joint the labour of walking would
be much greater than it is; for the centre of gravity would be more
elevated by each step. The line of motion of the centre of gravity in
walking is represented by _fig. 62._, and deviates but little
from a regular horizontal line, so that the elevation of the centre
of gravity is subject to very slight variation. But if there were no
knee-joint, as when a man has wooden legs, the centre of gravity would
move as in _fig. 63._, so that at each step the weight of the body
would be lifted through a considerable height, and therefore the labour
of walking would be much increased.

If a man stand on one leg, the line of direction of his weight must
fall within the space on which his foot treads. The smallness of this
space, compared with the height of the centre of gravity, accounts for
the difficulty of this feat.

The position of the centre of gravity of the body changes with the
posture and position of the limbs. If the arm be extended from one
side, the centre of gravity is brought nearer to that side than it was
when the arm hung perpendicularly. When dancers, standing on one leg,
extend the other at right angles to it, they must incline the body in
the direction opposite to that in which the leg is extended, in order
to bring the centre of gravity over the foot which supports them.

When a porter carries a load, his position must be regulated by the
centre of gravity of his body and the load taken together. If he bore
the load on his back, the line of direction would pass beyond his
heels, and he would fall backwards. To bring the centre of gravity
over his feet he accordingly leans forward, _fig. 64._

If a nurse carry a child in her arms, she leans back for a like reason.

When a load is carried on the head, the bearer stands upright, that the
centre of gravity may be over his feet.

In ascending a hill, we appear to incline forward; and in descending,
to lean backward, but in truth, we are standing upright with respect to
a level plane. This is necessary to keep the line of direction between
the feet, as is evident from _fig. 65._

A person sitting on a chair which has no back cannot rise from it
without either stooping forward to bring the centre of gravity over
the feet, or drawing back the feet to bring them under the centre of
gravity.

A quadruped never raises both feet on the same side simultaneously,
for the centre of gravity would then be unsupported. Let
A B C D, _fig. 66._, be the feet. The base on
which it stands is A B C D, and the centre of gravity
is nearly over the point O, where the diagonals cross each other. The
legs A and C being raised together, the centre of gravity is supported
by the legs B and D, since it falls between them; and when B and D
are raised it is, in like manner, supported by the feet A and C. The
centre of gravity, however, is often unsupported for a moment; for the
leg B is raised from the ground before A comes to it, as is plain from
observing the track of a horse’s feet, the mark of A being upon or
before that of B. In the more rapid paces of all animals the centre of
gravity is at intervals unsupported.

The feats of rope-dancers are experiments on the management of the
centre of gravity. The evolutions of the performer are found to be
facilitated by holding in his hand a heavy pole. His security in
this case depends, not on the centre of gravity of his body, but on
that of his body and the pole taken together. This point is near the
centre of the pole, so that, in fact, he may be said to hold in his
hands the point on the position of which the facility of his feats
depends. Without the aid of the pole the centre of gravity would be
within the trunk of the body, and its position could not be adapted to
circumstances with the same ease and rapidity.

(170.) The centre of gravity of a mass of fluid is that point which
would have the properties which have been proved to belong to the
centre of gravity of a solid, if the fluid were solidified without
changing in any respect the quantity or arrangement of its parts. This
point also possesses other properties, in reference to fluids, which
will be investigated in HYDROSTATICS and PNEUMATICS.

(171.) The centre of gravity of two bodies separated from one another,
is that point which would possess the properties ascribed to the centre
of gravity, if the two bodies were united by an inflexible line, the
weight of which might be neglected. To find this point mathematically
is a very simple problem. Let A and B, _fig. 67._, be the two
bodies, and _a_ and _b_ their centres of gravity. Draw the right line
_a b_, and divide it at C, in such a manner that _a_ C shall have
the same proportion to _b_ C as the mass of the body B has to the mass
of the body A.

This may easily be verified experimentally. Let A and B be two bodies,
whose weight is considerable, in comparison with that of the rod
_a b_, which joins them. Let a fine silken string, with its
ends attached to them, be hung upon a pin; and on the same pin let a
plumb-line be suspended. In whatever position the bodies may be hung,
it will be observed that the plumb-line will cross the rod _a b_
at the same point, and that point will divide the line _a b_ into
parts _a_ C and _b_ C, which are in the proportion of the mass of B to
the mass of A.

(172.) The centre of gravity of three separate bodies is defined in the
same manner as that of two, and may be found by first determining the
centre of gravity of two; and then supposing their masses concentrated
at that point, so as to form one body, and finding the centre of
gravity of that and the third.

In the same manner the centre of gravity of any number of bodies may be
determined.

(173.) If a plate of uniform thickness be bounded by straight edges,
its centre of gravity may be found by dividing it into triangles by
diagonal lines, as in _fig. 68._, and having determined by (154)
the centres of gravity of the several triangles, the centre of gravity
of the whole plate will be their common centre of gravity, found as
above.

(174.) Although the centre of gravity takes its name from the
familiar properties which it has in reference to detached bodies of
inconsiderable magnitude, placed on or near the surface of the earth,
yet it possesses properties of a much more general and not less
important nature. One of the most remarkable of these is, that the
centre of gravity of any number of separate bodies is never affected
by the mutual attraction, impact, or other influence which the bodies
may transmit from one to another. This is a necessary consequence of
the equality of action and reaction explained in Chapter IV. For if A
and B, _fig. 67._, attract each other, and change their places
to A′ and B′, the space a a′ will have to _b b′_ the same
proportion as B has to A, and therefore by what has just been proved
(171) the same proportion as _a_ C has to _b_ C. It follows, that the
remainders _a′_ C and _b′_ C will be in the proportion of B to A, and
that C will continue to be the centre of gravity of the bodies after
they have approached by their mutual attraction.

Suppose, for example, that A and B were 12lbs. and 8lbs. respectively,
and that _a b_ were 40 feet. The point C must (171) divide
_a b_ into two parts, in the proportion of 8 to 12, or of 2 to
3. Hence it is obvious that _a_ C will be 16 feet, and _b_ C 24 feet.
Now, suppose that A and B attract each other, and that A approaches
B through two feet. Then B must approach A through three feet. Their
distances from C will now be 14 feet and 21 feet, which, being in the
proportion of B to A, the point C will still be their centre of gravity.

Hence it follows, that if a system of bodies, placed at rest, be
permitted to obey their mutual attractions, although the bodies will
thereby be severally moved, yet their common centre of gravity must
remain quiescent.

(175.) When one of two bodies is moving in a straight line, the other
being at rest, their common centre of gravity must move in a parallel
straight line. Let A and B, _fig. 69._, be the centres of gravity
of the bodies, and let A move from A to _a_, B remaining at rest.
Draw the lines A B and _a_ B. In every position which the body B
assumes during its motion, the centre of gravity C divides the line
joining them into parts A C, B C, which are in the proportion
of the mass B to the mass A. Now, suppose any number of lines drawn
from B to the line A _a_; a parallel C _c_ to A _a_ through C divides
all these lines in the same proportion; and therefore, while the body A
moves from A to _a_, the common centre of gravity moves from C to _c_.

If both the bodies A and B moved uniformly in straight lines, the
centre of gravity would have a motion compounded (74) of the two
motions with which it would be affected, if each moved while the other
remained at rest. In the same manner, if there were three bodies, each
moving uniformly in a straight line, their common centre of gravity
would have a motion compounded of that motion which it would have if
one remained at rest while the other two moved, and that which the
motion of the first would give it if the last two remained at rest; and
in the same manner it may be proved, that when any number of bodies
move each in a straight line, their common centre of gravity will have
a motion compounded of the motions which it receives from the bodies
severally.

It may happen that the several motions which the centre of gravity
receives from the bodies of the system will neutralise each other; and
this does, in fact, take place for such motions as are the consequences
of the mutual action of the bodies upon one another.

(176.) If a system of bodies be not under the immediate influence of
any forces, and their mutual attraction be conceived to be suspended,
they must severally be either at rest or in uniform rectilinear
motion in virtue of their inertia. Hence, their common centre of
gravity must also be either at rest or in uniform rectilinear motion.
Now, if we suppose their mutual attractions to take effect, the
state of their common centre of gravity will not be changed, but the
bodies will severally receive motions compounded of their previous
uniform rectilinear motions and those which result from their mutual
attractions. The combined effects will cause each body to revolve in
an orbit round the common centre of gravity, or will precipitate it
towards that point. But still that point will maintain its former state
undisturbed.

This constitutes one of the general laws of mechanical science, and is
of great importance in physical astronomy. It is known by the title
“the conservation of the motion of the centre of gravity.”

(177.) The solar system is an instance of the class of phenomena to
which we have just referred. All the motions of the bodies which
compose it can be traced to certain uniform rectilinear motions,
received from some former impulse, or from a force whose action has
been suspended, and those motions which necessarily result from the
principle of gravitation. But we shall not here insist further on this
subject, which more properly belongs to another department of the
science.

(178.) If a solid body suffer an impact in the direction of a line
passing through its centre of gravity, all the particles of the body
will be driven forward with the same velocity in lines parallel to the
direction of the impact, and the whole force of the motion will be
equal to that of the impact. The common velocity of the parts of the
body will in this case be determined by the principles explained in
Chapter IV. The impelling force being equally distributed among all the
parts, the velocity will be found by dividing the numerical value of
that force by the number expressing the mass.

If any number of impacts be given simultaneously to different points
of a body, a certain complex motion will generally ensue. The mass
will have a relative motion round the centre of gravity as if it were
fixed, while that point will move forward uniformly in a straight line,
carrying the body with it. The relative motion of the mass round the
centre of gravity may be found by considering the centre of gravity
as a fixed point, round which the mass is free to move, and then
determining the motion which the applied forces would produce. This
motion being supposed to continue uninterrupted, let all the forces be
imagined to be applied in their proper directions and quantities to the
centre of gravity. By the principles for the composition of force they
will be mechanically equivalent to a single force through that point.
In the direction of this single force the centre of gravity will move
and have the same velocity as if the whole mass were there concentrated
and received the impelling forces.

(179.) These general properties, which are entirely independent of
gravity, render the “centre of gravity” an inadequate title for this
important point. Some physical writers have, consequently, called it
the “centre of inertia.” The “centre of gravity,” however, is the name
by which it is still generally designated.




CHAP. X.

THE MECHANICAL PROPERTIES OF AN AXIS.


(180.) When a body has a motion of rotation, the line round which it
revolves is called an _axis_. Every point of the body must in this
case move in a circle, whose centre lies in the axis, and whose radius
is the distance of the point from the axis. Sometimes while the body
revolves, the axis itself is moveable, and not unfrequently in a state
of actual motion. The motions of the earth and planets, or that of
a common spinning-top, are examples of this. The cases, however, which
will be considered in the present chapter, are chiefly those in which
the axis is immovable, or at least where its motion has no relation to
the phenomena under investigation. Instances of this are so frequent
and obvious, that it seems scarcely necessary to particularise them.
Wheel-work of every description, the moving parts of watches and
clocks, turning lathes, mill-work, doors and lids on hinges, are all
obvious examples. In tools or other instruments which work on joints or
pivots, such as scissors, shears, pincers, although the joint or pivot
be not absolutely fixed, it is to be considered so in reference to the
mechanical effect.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

In some cases, as in most of the wheels of watches and clocks,
fly-wheels and chucks of the turning lathe, and the arms of wind-mills,
the body turns continually in the same direction, and each of its
points traverses a complete circle during every revolution of the
body round its axis. In other instances the motion is alternate or
reciprocating, its direction being at intervals reversed. Such is
the case in pendulums of clocks, balance-wheels of chronometers, the
treddle of the lathe, doors and lids on hinges, scissors, shears,
pincers, &c. When the alternation is constant and regular, it is called
_oscillation_ or _vibration_, as in pendulums and balance-wheels.

(181.) To explain the properties of an axis of rotation it will be
necessary to consider the different kinds of forces to the action of
which a body moveable on such an axis may be submitted, to show how
this action depends on their several quantities and directions, to
distinguish the cases in which the forces neutralise each other and
mutually equilibrate from those in which motion ensues, to determine
the effect which the axis suffers, and, in the cases where motion is
produced, to estimate the effects of those centrifugal forces (137.)
which are created by the mass of the body whirling round the axis.

Forces in general have been distinguished by the duration of their
action into instantaneous and continued forces. The effect of an
instantaneous force is produced in an infinitely short time. If
the body which sustains such an action be previously quiescent and
free, it will move with a uniform velocity in the direction of the
impressed force. (93.) If, on the other hand, the body be not free,
but so restrained that the impulse cannot put it in motion, then the
fixed points or lines which resist the motion sustain a corresponding
shock at the moment of the impulse. This effect, which is called
_percussion_, is, like the force which causes it, instantaneous.

A continued force produces a continued effect. If the body be free and
previously quiescent, this effect is a continual increase of velocity.
If the body be so restrained that the applied force cannot put it in
motion, the effect is a continued pressure on the points or lines which
sustain it. (94.)

It may happen, however, that although the body be not absolutely free
to move in obedience to the force applied to it, yet still it may not
be altogether so restrained as to resist the effect of that force and
remain at rest. If the point at which a force is applied be free to
move in a certain direction not coinciding with that of the applied
force, that force will be resolved into two elements; one of which is
in the direction in which the point is free to move, and the other at
right angles to that direction. The point will move in obedience to
the former element, and the latter will produce percussion or pressure
on the points or lines which restrain the body. In fact, in such cases
the resistance offered by the circumstances which confine the motion
of the body modifies the motion which it receives, and as every change
of motion must be the consequence of a force applied (44.), the fixed
points or lines which offer the resistance must suffer a corresponding
effect.

It may happen that the forces impressed on the body, whether they
be continued or instantaneous, are such as, were it free, would
communicate to it a motion which the circumstances which restrain it
do not forbid it to receive. In such a case the fixed points or lines
which restrain the body sustain no force, and the phenomena will be
the same in all respects as if these points or lines were not fixed.

It will be easy to apply these general reflections to the case in which
a solid body is moveable on a fixed axis. Such a body is susceptible
of no motion except one of rotation on that axis. If it be submitted
to the action of instantaneous forces, one or other of the following
effects must ensue. 1. The axis may resist the forces, and prevent any
motion. 2. The axis may modify the effect of the forces sustaining a
corresponding percussion, and the body receiving a motion of rotation.
3. The forces applied may be such as would cause the body to spin round
the axis even were it not fixed, in which case the body will receive a
motion of rotation, but the axis will suffer no percussion.

What has been just observed of the effect of instantaneous forces is
likewise applicable to continued ones. 1. The axis may entirely resist
the effect of such forces, in which case it will suffer a pressure
which may be estimated by the rules for the composition of force. 2.
It may modify the effect of the applied forces, in which case it must
also sustain a pressure, and the body must receive a motion of rotation
which is subject to constant variation, owing to the incessant action
of the forces. 3. The forces may be such as would communicate to the
body the same rotatory motion if the axis were not fixed. In this case
the forces will produce no pressure on the axis.

The impressed forces are not the only causes which affect the axis of
a body during the phenomenon of rotation. This species of motion calls
into action other forces depending on the inertia of the mass, which
produce effects upon the axis, and which play a prominent part in the
theory of rotation. While the body revolves on its axis, the component
particles of its mass move in circles, the centres of which are placed
in the axis. The radius of the circle in which each particle moves is
the line drawn from that particle perpendicular to the axis. It has
been already proved that a particle of matter, moving round a centre,
is attended with a centrifugal force proportionate to the radius of the
circle in which it moves and to the square of its angular velocity.
When a solid body revolves on its axis, all its parts are whirled round
together, each performing a complete revolution in the same time. The
angular velocity is consequently the same for all, and the difference
of the centrifugal forces of different particles must entirely depend
upon their distances from the axis. The tendency of each particle to
fly from the axis, arising from the centrifugal force, is resisted by
the cohesion of the parts of the mass, and in general this tendency is
expended in exciting a pressure or strain upon the axis. It ought to
be recollected, however, that this pressure or strain is altogether
different from that already mentioned, and produced by the forces which
give motion to the body. The latter depends entirely upon the quantity
and directions of the applied forces in relation to the axis: the
former depends on the figure and density of the body, and the velocity
of its motion.

These very complex effects render a simple and elementary exposition
of the mechanical properties of a fixed axis a matter of considerable
difficulty. Indeed, the complete mathematical development of this
theory long eluded the skill of the most acute geometers, and it was
only at a comparatively late period that it yielded to the searching
analysis of modern science.

(182.) To commence with the most simple case, we shall consider the
body as submitted to the action of a single force. The effect of this
force will vary according to the relation of its direction to that of
the axis. There are two ways in which a body may be conceived to be
moveable around an axis. 1. By having pivots at two points which rest
in sockets, so that when the body is moved it must revolve round the
right line joining the pivots as an axis. 2. A thin cylindrical rod may
pass through the body, on which it may turn in the same manner as a
wheel upon its axle.

If the force be applied to the body in the direction of the axis, it
is evident that no motion can ensue, and the effect produced will be a
pressure on that pivot towards which the force is directed. If in this
case the body revolved on a cylindrical rod, the tendency of the force
would be to make it slide along the rod without revolving round it.

Let us next suppose the force to be applied not in the direction of
the axis itself, but parallel to it. Let A B, _fig. 70._,
be the axis, and let C D be the direction of the force applied.
The pivots being supposed to be at A and B, draw A G and B F
perpendicular to A B. The force C D will be equivalent to
three forces, one acting from B towards A, equal in quantity to the
force C D. This force will evidently produce a corresponding
pressure on the pivot A. The other two forces will act in the
directions A G and B F, and will have respectively to the
force C D the same proportion as A E has to A B. Such
will be the mechanical effect of a force C D parallel to the axis.
And as these effects are all directed on the pivots, no motion can
ensue.

If the body revolve on a cylindrical rod, the forces A G and
B F would produce a strain upon the axis, while the third force
in the direction B A would have a tendency to make the body slide
along it.

(183.) If the force applied to the body be directed upon the axis,
and at right angles to it, no motion can be produced. In this case,
if the body be supported by pivots at A and B, the force K L,
perpendicular to the line A B, will be distributed between the
pivots, producing a pressure on each proportional to its distance from
the other. The pressure on A having to the pressure on B the same
proportion as L B has to L A.

If the force K H be directed obliquely to the axis, it will be
equivalent to two forces (76.), one K L perpendicular to the axis,
and the other K M parallel to it. The effect of each of these may
be investigated as in the preceding cases.

In all these observations the body has been supposed to be submitted
to the action of one force only. If several forces act upon it, the
direction of each of them crossing the axis either perpendicularly
or obliquely, or taking the direction of the axis or any parallel
direction, their effects may be similarly investigated. In the same
manner we may determine the effects of any number of forces whose
combined results are mechanically equivalent to forces which either
intersect the axis or are parallel to it.

(184.) If any force be applied whose direction lies in a plane oblique
to the axis, it can always be resolved into two elements (76.), one of
which is parallel to the axis, and the other in a plane perpendicular
to it. The effect of the former has been already determined, and
therefore we shall at present confine our attention to the latter.

Suppose the axis to be perpendicular to the paper, and to pass through
the point G, _fig. 71._ and let A B C be a section of
the body. It will be convenient to consider the section vertical and
the axis horizontal, omitting, however, any notice of the effect of the
weight of the body.

Let a weight W be suspended by a cord Q W from any point Q. This
weight will evidently have a tendency to turn the body round in the
direction A B C. Let another cord be attached to any other
point P, and, being carried over a wheel R, let a dish S be attached to
it, and let fine sand be poured into this dish until the tendency of
S to turn the body round the axis in the direction of C B A
balances the opposite tendency of W. Let the weights of W and S be
then exactly ascertained, and also let the distances G I and
G H of the cords from the axis be exactly measured. It will be
found that, if the number of ounces in the weight S be multiplied by
the number of inches in G H, and also the number of ounces in W
by the number of inches in G I, equal products will be obtained.
This experiment may be varied by varying the position of the wheel R,
and thereby changing the direction of the string P R, in which
cases it will be always found necessary to vary the weight of S in
such a manner, that when the number of ounces in it is multiplied by
the number of inches in the distance of the string from the axis, the
product obtained shall be equal to that of the weight W by the distance
G I. We have here used ounces and inches as the measures of weight
and distance; but it is obvious that any other measures would be
equally applicable.

From what has been just stated it follows, that the energy of the
weight of S to move the body on its axis, does not depend alone upon
the actual amount of that weight, but also upon the distance of the
string from the axis. If, while the position of the string remains
unaltered, the weight of S be increased or diminished, the resisting
weight W must be increased or diminished in the same proportion. But
if, while the weight of S remains unaltered, the distance of the string
P R from the axis G be increased or diminished, it will be found
necessary to increase or diminish the resisting weight W in exactly the
same proportion. It therefore appears that the increase or diminution
of the distance of the direction of a force from the axis has the
same effect upon its power to give rotation as a similar increase
or diminution of the force itself. The power of a force to produce
rotation is, therefore, accurately estimated, not by the force alone,
but by the product found by multiplying the force by the distance of
its direction from the axis. It is frequently necessary in mechanical
science to refer to this power of a force, and, accordingly, the
product just mentioned has received a particular denomination. It is
called the _moment_ of the force round the axis.

(185.) The distance of the direction of a force from the axis is
sometimes called the _leverage_ of the force. The _moment_ of a force
is therefore found by multiplying the force by its leverage, and the
energy of a given force to turn a body round an axis is proportional to
the leverage of that force.

From all that has been observed it may easily be inferred that, if
several forces affect a body moveable on an axis, having tendencies
to turn it in different directions, they will mutually neutralise
each other and produce equilibrium, if the sum of the moments of those
forces which tend to turn the body in one direction be equal to the
sum of the moments of those which tend to turn it in the opposite
direction. Thus, if the forces A, B, C, ... tend to turn the body from
right to left, and the distances of their directions from the axis be
_a_, _b_, _c_, ... and the forces A′, B′, C′, ... tend to move it from
left to right, and the distances of their directions from the axis be
_a′_, _b′_, _c′_, ...; then these forces will produce equilibrium,
if the products found by multiplying the ounces in A, B, C, ...
respectively by the inches in _a_, _b_, _c_, ... when added together
be equal to the products found by multiplying the ounces in A′, B′,
C′, ... by the inches in _a′_, _b′_, _c′_, ... respectively when added
together. But if either of these sets of products when added together
exceed the other, the corresponding set of forces will prevail, and the
body will revolve on its axis.

(186.) When a body receives an impulse in a direction perpendicular to
the axis, but not crossing it, a uniform rotatory motion is produced.
The velocity of this motion depends on the force of the impulse, the
distance of the direction of the impulse from the axis, and the manner
in which the mass of the body is distributed round the axis. It is to
be considered that the whole force of the impulse is shared amongst the
various parts of the mass, and is transmitted to them from the point
where the impulse is applied by reason of the cohesion and tenacity
of the parts, and the impossibility of one part yielding to a force
without carrying all the other parts with it. The force applied acts
upon those particles nearer to the axis than its own direction under
advantageous circumstances; for, according to what has been already
explained, their power to resist the effect of the applied force is
small in the same proportion with their distance. On the other hand,
the applied force acts upon particles of the mass, at a greater
distance than its own direction, under circumstances proportionably
disadvantageous; for their resistance to the applied force is great in
proportion to their distances from the axis.

Let C D, _fig. 72._, be a section of the body made by a plane
passing through the axis A B. Suppose the impulse to be applied at
P, perpendicular to this plane, and at the distance P O from the
axis. The effect of the impulse being distributed through the mass will
cause the body to revolve on A B, with a uniform velocity. There
is a certain point G, at which, if the whole mass were concentrated,
it would receive from the impulse the same velocity round the axis.
The distance O G is called the _radius of gyration_ of the axis
A B, and the point G is called the _centre of gyration_ relatively
to that axis. The effect of the impulse upon the mass concentrated at
G is great in exactly the same proportion as O G is small. This
easily follows from the property of moments which has been already
explained; from whence it may be inferred, that the greater the radius
of gyration is, the less will be the velocity which the body will
receive from a given impulse.

(187.) Since the radius of gyration depends on the manner in which the
mass is arranged round the axis, it follows that for different axes
in the same body there will be different radii of gyration. Of all
axes taken in the same body parallel to each other, that which passes
through the centre of gravity has the least radius of gyration. If the
radius of gyration of any axis passing through the centre of gravity be
given, that of any parallel axis can be found; for the square of the
radius of gyration of any axis is equal to the square of the distance
of that axis from the centre of gravity added to the square of the
radius of gyration of the parallel axis through the centre of gravity.

(188.) The product of the numerical expressions for the mass of the
body and the square of the radius of gyration is a quantity much used
in mechanical science, and has been called the _moment of inertia_. The
moments of inertia, therefore, for different axes in the same body are
proportional to the squares of the corresponding radii of gyration; and
consequently increase as the distances of the axes from the centre of
gravity increase. (187.)

(189.) From what has been explained in (187.), it follows, that the
moment of inertia of any axis may be computed by common arithmetic, if
the moment of inertia of a parallel axis through the centre of gravity
be previously known. To determine this last, however, would require
analytical processes altogether unsuitable to the nature and objects of
the present treatise.

The velocity of rotation which a body receives from a given impulse
is great in exactly the same proportion as the moment of inertia is
small. Thus the moment of inertia may be considered in rotatory motion
analogous to the mass of the body in rectilinear motion.

From what has been explained in (187.) it follows that a given impulse
at a given distance from the axis will communicate the greatest
angular velocity when the axis passes through the centre of gravity,
and that the velocity which it will communicate round other axes
will be diminished in the same proportion as the squares of their
distances from the centre of gravity added to the square of the radius
of gyration for a parallel axis through the centre of gravity are
augmented.

(190.) If any point whatever be assumed in a body, and right lines
be conceived to diverge in all directions from that point, there are
generally two of these lines, which being taken as axes of rotation,
one has a greater and the other a less moment of inertia than any of
the others. It is a remarkable circumstance, that, whatever be the
nature of the body, whatever be its shape, and whatever be the position
of the point assumed, these two axes of greatest and least moment will
always be at right angles to each other.

These axes and a third through the same point, and at right angles to
both of them, are called the _principal axes_ of that point from which
they diverge. To form a distinct notion of their relative position,
let the axis of greatest moment be imagined to lie horizontally from
north to south, and the axis of least moment from east to west; then
the third principal axis will be presented perpendicularly upwards and
downwards. The first two being called the principal axes of greatest
and least moment, the third may be called the _intermediate principal
axis_.

(191.) Although the moments of the three principal axes be in general
unequal, yet bodies may be found having certain axes for which these
moments may be equal. In some cases the moment of the intermediate axis
is equal to that of the principal axis of greatest moment: in others it
is equal to that of the principal axis of least moment, and in others
the moments of all the three principal axes are equal to each other.

If the moments of any two of three principal axes be equal, the moments
of all axes through the same point and in their plane will also be
equal; and if the moments of the three principal axes through a point
be equal, the moments of all axes whatever, through the same point,
will be equal.

(192.) If the moments of the principal axes through the centre of
gravity be known, the moments for all other axes through that point may
be easily computed. To effect this it is only necessary to multiply
the moments of the principal axes by the squares of the co-sines of
the angles formed by them respectively with the axis whose moment is
sought. The products being added together will give the required moment.

(193.) By combining this result with that of (189.), it will be evident
that the moment of all axes whatever may be determined, if those of the
principal axes through the centre of gravity be known.

(194.) It is obvious that the principal axis of least moment through
the centre of gravity has a less moment of inertia than any other axis
whatever. For it has, by its definition (190.) a less moment of inertia
than any other axis through the centre of gravity, and every other
axis through the centre of gravity has a less moment of inertia than a
parallel axis through any other point (187.) and (189.)

(195.) If two of the principal axes through the centre of gravity have
equal moments of inertia, all axes in any plane parallel to the plane
of these axes, and passing through the point where a perpendicular from
the centre of gravity meets that plane, must have equal moments of
inertia. For by (191.) all axes in the plane of those two have equal
moments, and by (189.) the axes in the parallel plane have moments
which exceed these by the same quantity, being equally distant from
them. (187.)

Hence it is obvious that if the three principal axes through the centre
of gravity have equal moments, all axes situated in any given plane,
and passing through the point where the perpendicular from the centre
of gravity meets that plane, will have equal moments, being equally
distant from parallel axes through the centre of gravity.

(196.) If the three principal axes through the centre of gravity have
unequal moments, there is no point whatever for which all axes will
have equal moments; but if the principal axis of least moment and
the intermediate principal axis through the centre of gravity have
equal moments, then there will be two points on the principal axis
of greatest moment, equally distant at opposite sides of the centre
of gravity, at which all axes will have equal moments. If the three
principal axes through the centre of gravity have equal moments, no
other point of the body can have principal axes of equal moment.

(197.) When a body revolves on a fixed axis, the parts of its mass are
whirled in circles round the axis; and since they move with a common
angular velocity, they will have centrifugal forces proportional to
their distances from the axis. If the component parts of the mass were
not united together by cohesive forces of energies greater than these
centrifugal forces, they would be separated, and would fly off from
the axis; but their cohesion prevents this, and causes the effects of
the different centrifugal forces, which affect the different parts of
the mass, to be transmitted so as to modify each other, and finally
to produce one or more forces mechanically equivalent to the whole,
and which are exerted upon the axis and resisted by it. We propose
now to explain these effects, as far as it is possible to render them
intelligible without the aid of mathematical language.

It is obvious that any number of equal parts of the mass, which are
uniformly arranged in a circle round the axis, have equal centrifugal
forces acting from the centre of the circle in every direction. These
mutually neutralise each other, and therefore exert no force on the
axis. The same may be said of all parts of the mass which are regularly
and equally distributed on every side of the axis.

Also if equal masses be placed at equal distances on opposite sides
of the axis, their centrifugal forces will destroy each other. Hence
it appears that the pressure which the axis of rotation sustains from
the centrifugal forces of the revolving mass, arises from the unequal
distribution of the matter around it.

From this reasoning it will be easily perceived that in the following
examples the axis of rotation will sustain no pressure.

A globe revolving on any of its diameters, the density being the same
at equal distances from the centre.

A spheroid or a cylinder revolving on its axis, the density being equal
at equal distances from the axis.

A cube revolving on an axis which passes through the centre of two
opposite bases, being of uniform density.

A circular plate of uniform thickness and density revolving on one of
its diameters as an axis.

(198.) In all these examples it will be observed that the axis of
rotation passes through the centre of gravity. The general theorem, of
which they are only particular instances, is, “if a body revolve on a
principal axis, passing through the centre of gravity, the axis will
sustain no pressure from the centrifugal force of the revolving mass.”
This is a property in which the principal axes through the centre
of gravity are unique. There is no other axis on which a body could
revolve without pressure.

If two of the principal axes through the centre of gravity have equal
moments, every axis in their plane has the same moment, and is to be
considered equally as a principal axis. In this case the body would
revolve on any of these axes without pressure.

A homogeneous spheroid furnishes an example of this. If any of the
diameters of the earth’s equator were a fixed axis, the earth would
revolve on it without producing pressure.

If the three principal axes through the centre of gravity have equal
moments, all axes through the centre of gravity are to be considered as
principal axes. In this case the body would revolve without pressure on
any axis through the centre of gravity.

A globe, in which the density of the mass at equal distances from the
centre is the same, is an example of this. Such a body would revolve
without pressure on any axis through its centre.

(199.) Since no pressure is excited on the axis in these cases, the
state of the body will not be changed, if during its rotation the axis
cease to be fixed. The body will notwithstanding continue to revolve
round the axis, and the axis will maintain its position.

Thus a spinning-top of homogeneous material and symmetrical form will
revolve steadily in the same position, until the friction of its point
with the surface on which it rests deprives it of motion. This is a
phenomenon which can only be exhibited when the axis of rotation is a
principal axis through the centre of gravity.

(200.) If the body revolve round any axis through the centre of
gravity, which is not a principal axis, the centrifugal pressure is
represented by two forces, which are equal and parallel, but which act
in opposite directions on different points of the axis. The effect of
these forces is to produce a strain upon the axis, and give the body a
tendency to move round another axis at right angles to the former.

(201.) If the fixed axis on which a body revolves be a principal axis
through any point different from the centre of gravity, then a pressure
will be produced by the centrifugal force of the revolving mass, and
this pressure will act at right angles to the axis on the point to
which it is a principal axis, and in the plane through that axis and
the centre of gravity. The amount of the pressure will be proportional
to the mass of the body, the distance of the centre of gravity from the
axis, and the square of the velocity of rotation.

(202.) Since the whole pressure is in this case excited on a single
point, the stability of the axis will not be disturbed, provided that
point alone be fixed. So that even though the axis should be free to
turn on that point, no motion will ensue as long as no external forces
act upon the body.

(203.) If the axis of rotation be not a principal axis, the centrifugal
forces will produce an effect which cannot be represented by a single
force. The effect may be understood by conceiving two forces to act
on _different points_ of the axis at right angles to it and to each
other. The quantities of these pressures and their directions depend
on the figure and density of the mass and the position of the axis,
in a manner which cannot be explained without the aid of mathematical
language and principles.

(204.) The effects upon the axis which have been now explained are
those which arise from the motion of rotation, from whatever cause that
motion may have arisen. The forces which produce that motion, however,
are attended with effects on the axis which still remain to be noticed.
When these forces, whether they be of the nature of instantaneous
actions or continued forces, are entirely resisted by the axis, their
directions must severally be in a plane passing through the axis, or
they must, by the principles of the composition of force [(74.) et
seq.], be mechanically equivalent to forces in that plane. In every
other case the impressed forces _must_ produce motion, and, except in
certain cases, must also produce effects upon the axis.

By the rules for the composition of force it is possible in all cases
to resolve the impressed forces into others which are either in planes
through the axis, or in planes perpendicular to it, or, finally, some
in planes through it, and others in planes perpendicular to it. The
effect of those which are in planes through the axis has been already
explained; and we shall now confine our attention to those impelling
forces which act at right angles to the axis, and which produce motion.

It will be sufficient to consider the effect of a single force at right
angles to the axis; for whatever be the number of forces which act
either simultaneously or successively, the effect of the whole will
be decided by combining their separate effects. The effect which a
single force produces depends on two circumstances, 1. The position of
the axis with respect to the figure and mass of the body, and 2. The
quantity and direction of the force itself.

In general the shock which the axis sustains from the impact may be
represented by two impacts applied to it at different points, one
parallel to the impressed force, and the other perpendicular to it,
but both perpendicular to the axis. There are certain circumstances,
however, under which this effect will be modified.

If the impulse which the body receives be in a direction perpendicular
to a plane through the axis and the centre of gravity, and at a
distance from the axis which bears to the radius of gyration (186.)
the same proportion as that line bears to the distance of the centre
of gravity from the axis, there are certain cases in which the impulse
will produce no percussion. To characterise these cases generally would
require analytical formulæ which cannot conveniently be translated
into ordinary language. That point of the plane, however, where the
direction of the impressed force meets it, when no percussion on the
axis is produced, is called the _centre of percussion_.

If the axis of rotation be a principal axis, the centre of percussion
must be in the right line drawn through the centre of gravity,
intersecting the axis at right angles, and at the distance from the
axis already explained.

If the axis of rotation be parallel to a principal axis through the
centre of gravity, the centre of percussion will be determined in the
same manner.

(205.) There are many positions which the axis may have in which there
will be no centre of percussion; that is, there will be no direction in
which an impulse could be applied without producing a shock upon the
axis. One of these positions is when it is a principal axis through
the centre of gravity. This is the only case of rotation round an axis
in which no effect arises from the centrifugal force; and therefore it
follows that the only case in which the axis sustains no effect from
the motion produced, is one in which it must necessarily suffer an
effect from that which produces the motion.

If the body be acted upon by continued forces, their effect is at each
instant determined by the general principles for the composition of
force.




CHAP. XI.

ON THE PENDULUM.


(206.) When a body is placed on a horizontal axis which does not
pass through its centre of gravity, it will remain in permanent
equilibrium only when the centre of gravity is immediately below the
axis. If this point be placed in any other situation, the body will
oscillate from side to side, until the atmospherical resistance and the
friction of the axis destroy its motion. (159, 160.) Such a body is
called a _pendulum_. The swinging motion which it receives is called
_oscillation_ or _vibration_.

(207.) The use of the pendulum, not only for philosophical purposes,
but in the ordinary economy of life, renders it a subject of
considerable importance. It furnishes the most exact means of measuring
time, and of determining with precision various natural phenomena. By
its means the variation of the force of gravity in different latitudes
is discovered, and the law of that variation experimentally exhibited.
In the present chapter, we propose to explain the general principles
which regulate the oscillation of pendulums. Minute details concerning
their construction will be given in the twenty-first chapter of this
volume.

(208.) A simple pendulum is composed of a heavy molecule attached
to the end of a flexible thread, and suspended by a fixed point O,
_fig. 73._ When the pendulum is placed in the position O C,
the molecule being vertically below the point of suspension, it will
remain in equilibrium; but if it be drawn into the position O A
and there liberated, it will descend towards C, moving through the arc
A C with accelerated motion. Having arrived at C and acquired
a certain velocity, it will, by reason of its inertia, continue to
move in the same direction. It will therefore commence to ascend the
arc C A′ with the velocity so acquired. During its ascent, the
weight of the molecule retards its motion in exactly the same manner
as it had accelerated it in descending from A to C; and when the
molecule has ascended through the arc C A′ equal to C A,
its entire velocity will be destroyed, and it will cease to move in
that direction. It will thus be placed at A′ in the same manner as in
the first instance it had been placed at A, and consequently it will
descend from A′ to C with accelerated motion, in the same manner as
it first moved from A to C. It will then ascend from C to A, and so
on, continually. In this case the thread, by which the molecule is
suspended, is supposed to be perfectly flexible, inextensible, and
of inconsiderable weight. The point of suspension is supposed to be
without friction, and the atmosphere to offer no resistance to the
motion.

It is evident from what has been stated, that the times of moving from
A to A′ and from A′ to A are equal, and will continue to be equal so
long as the pendulum continues to vibrate. If the number of vibrations
performed by the pendulum were registered, and the time of each
vibration known, this instrument would become a chronometer.

The rate at which the motion of the pendulum is accelerated in its
descent towards its lowest position is not uniform, because the force
which impels it is continually decreasing, and altogether disappears
at the point C. The impelling force arises from the effect of gravity
on the suspended molecule, and this effect is always produced in the
vertical direction A V. The greater the angle O A V is,
the less efficient the force of gravity will be in accelerating the
molecule: this angle evidently increases as the molecule approaches
C, which will appear by inspecting _fig. 73._ At C, the force of
gravity acting in the direction C B is totally expended in giving
tension to the thread, and is inefficient in moving the molecule. It
follows, therefore, that the impelling force is greatest at A, and
continually diminishes from A to C, where it altogether vanishes. The
same observations will be applicable to the retarding force from C to
A′, and to the accelerating force from A′ to C, and so on.

When the length of the thread and the intensity of the force of
gravity are given, the time of vibration depends on the length of the
arc A C, or on the magnitude of the angle A O C. If,
however, this angle do not exceed a certain limit of magnitude, the
time of vibration will be subject to no sensible variation, however
that angle may vary. Thus the time of oscillation will be the same,
whether the angle A O C be 2°, or 1° 30′, or 1°, or any
lesser magnitude. This property of a pendulum is expressed by the word
_isochronism_. The strict demonstration of this property depends on
mathematical principles, the details of which would not be suitable
to the present treatise. It is not difficult, however, to explain
generally how it happens that the same pendulum will swing through
greater and smaller arcs of vibration in the same time. If it swing
from A, the force of gravity at the commencement of its motion impels
it with an effect depending on the obliquity of the lines O A and
A V. If it commence its motion from _a_, the impelling effect from
the force of gravity will be considerably less than at A; consequently,
the pendulum begins to move at a slower rate, when it swings from
_a_ than when it moves from A: the greater magnitude of the swing is
therefore compensated by the increased velocity, so that the greater
and the smaller arcs of vibration are moved through in the same time.

(209.) To establish this property experimentally, it is only necessary
to suspend a small ball of metal, or other heavy substance, by a
flexible thread, and to put it in a state of vibration, the entire
arc of vibration not exceeding 4° or 5°, the friction on the point
of suspension and other causes will gradually diminish the arc of
vibration, so that after the lapse of some hours it will be so small,
that the motion will scarcely be discerned without microscopic aid. If
the vibration of this pendulum be observed in reference to a correct
timekeeper, at the commencement, at the middle, and towards the end of
its motion, the rate will be found to suffer no sensible change.

This remarkable law of isochronism was one of the earliest discoveries
of Galileo. It is said, that when very young, he observed a chandelier
suspended from the roof of a church in Pisa swinging with a pendulous
motion, and was struck with the uniformity of the rate even when the
extent of the swing was subject to evident variation.

(210.) It has been stated in (117.) that the attraction of gravity
affects all bodies equally, and moves them with the same velocity,
whatever be the nature or quantity of the materials of which they are
composed. Since it is the force of gravity which moves the pendulum, we
should therefore expect that the circumstances of that motion should
not be affected either by the quantity or quality of the pendulous
body. And we find this, in fact, to be the case; for if small pieces
of different heavy substances such as lead, brass, ivory, &c., be
suspended by fine threads of equal length, they will vibrate in the
same time, provided their weights bear a considerable proportion to the
atmospherical resistance, or that they be suspended _in vacuo_.

(211.) Since the time of vibration of a pendulum, which oscillates in
small arcs, depends neither on the magnitude of the arc of vibration
nor on the quality or weight of the pendulous body, it will be
necessary to explain the circumstances on which the variation of this
time depends.

The first and most striking of these circumstances is the length of
the suspending thread. The rudest experiments will demonstrate the
fact, that every increase in the length of this thread will produce a
corresponding increase in the time of vibration; but according to what
law does this increase proceed? If the length of the thread be doubled
or trebled, will the time of vibration also be increased in a double
or treble proportion? This problem is capable of exact mathematical
solution, and the result shows that the time of vibration increases not
in the proportion of the increased length of the thread, but as the
square root of that length; that is to say, if the length of the thread
be increased in a four-fold proportion, the time of vibration will be
augmented in a two-fold proportion. If the thread be increased to nine
times its length, the time of vibration will be trebled, and so on.
This relation is exactly the same as that which was proved to subsist
between the spaces through which a body falls freely, and the times
of fall. In the table, page 89, if the figures representing the
height be understood to express the length of different pendulums, the
figures immediately above them will express the corresponding times of
vibration.

This law of the proportion of the lengths of pendulums to the squares
of the time of vibration may be experimentally established in the
following manner:--

Let A, B, C, _fig. 74._, be three small pieces of metal each
attached by threads to two points of suspension, and let them be placed
in the same vertical line under the point O; suppose them so adjusted
that the distances O A, O B, and O C shall be in the
proportion of the numbers 1, 4, and 9. Let them be removed from the
vertical in a direction at right angles to the plane of the paper, so
that the threads shall be in the same plane, and therefore the three
pendulums will have the same angle of vibration. Being now liberated,
the pendulum A will immediately gain upon B, and B upon C, so that A
will have completed one vibration before B or C. At the end of the
second vibration of A, the pendulum B will have arrived at the end of
its first vibration, so that the suspending threads of A and B will
then be separated by the whole angle of vibration; at the end of the
fourth vibration of A the suspending threads of A and B will return
to their first position, B having completed two vibrations; thus the
proportion of the times of vibration of B and A will be 2 to 1, the
proportion of their lengths being 4 to 1. At the end of the third
vibration of A, C will have completed one vibration, and the suspending
strings will coincide in the position distant by the whole angle of
vibration from their first position. So that three vibrations of A are
performed in the same time as one of C: the proportion of the time of
vibration of C and A are, therefore, 3 to 1, the proportion of their
lengths being 9 to 1, conformably to the law already explained.

(212.) In all the preceding observations we have assumed that the
material of the pendulous body is of inconsiderable magnitude, its
whole weight being conceived to be collected in a physical point.
This is generally called a simple pendulum; but since the conditions
of a suspending thread without weight, and a heavy molecule without
magnitude, cannot have practical existence, the simple pendulum must
be considered as imaginary, and merely used to establish hypothetical
theorems, which, though inapplicable in practice, are nevertheless the
means of investigating the laws which govern the real phenomena of
pendulous bodies.

A pendulous body being of determinate magnitude, its several parts
will be situated at different distances from the axis of suspension.
If each component part of such a body were separately connected with
the axis of suspension by a fine thread, it would, being unconnected
with the other particles, be an independent simple pendulum, and
would oscillate according to the laws already explained. It therefore
follows that those particles of the body which are nearest to the
axis of suspension would, if liberated from their connection with the
others, vibrate more rapidly than those which are more remote. The
connection, however, which the particles of the body have, by reason
of their solidity, compels them all to vibrate in the same time.
Consequently, those particles which are nearer the axis are retarded
by the slower motion of those which are more remote; while the more
remote particles, on the other hand, are urged forward by the greater
tendency of the nearer particles to rapid vibration. This will be more
readily comprehended, if we conceive two particles of matter A and B,
_fig. 75._, to be connected with the same axis O by an inflexible
wire O C, the weight of which may be neglected. If B were removed,
A would vibrate in a certain time depending upon the distance O A.
If A were removed, and B placed upon the wire at a distance B O
equal to four times A O, B would vibrate in twice the former time.
Now if both be placed on the wire at the distances just mentioned,
the tendency of A to vibrate more rapidly will be transmitted to B
by means of the wire, and will urge B forward more quickly than if
A were not present: on the other hand, the tendency of B to vibrate
more slowly will be transmitted by the wire to A, and will cause it to
move more slowly than if B were not present. The inflexible quality
of the connecting wire will in this case compel A and B to vibrate
simultaneously, the time of vibration being greater than that of A, and
less than that of B, if each vibrated unconnected with the other.

If, instead of supposing two particles of matter placed on the wire,
a greater number were supposed to be placed at various distances from
O, it is evident the same reasoning would be applicable. They would
mutually affect each other’s motion; those placed nearest to point
O accelerating the motion of those more remote, and being themselves
retarded by the latter. Among these particles one would be found
in which all these effects would be mutually neutralised, all the
particles nearer O being retarded in reference to that motion which
they would have if unconnected with the rest, and those more remote
being in the same respect accelerated. The point at which such a
particle is placed is called _the centre of oscillation_.

What has been here observed of the effects of particles of matter
placed upon rigid wire will be equally applicable to the particles of
a solid body. Those which are nearer to the axis are urged forward by
those which are more remote, and are in their turn retarded by them;
and as with the particles placed upon the wire, there is a certain
particle of the body at which the effects are mutually neutralised, and
which vibrates in the same time as it would if it were unconnected with
the other parts of the body, and simply connected by a fine thread to
the axis. By this centre of oscillation the calculations respecting the
vibration of a solid body are rendered as simple as those of a molecule
of inconsiderable magnitude. All the properties which have been
explained as belonging to a simple pendulum may thus be transferred
to a vibrating body of any magnitude and figure, by considering it as
equivalent to a single particle of matter vibrating at its centre of
oscillation.

(213.) It follows from this reasoning, that the virtual length of
a pendulum is to be estimated by the distance of its centre of
oscillation from the axis of suspension, and therefore that the times
of vibration of different pendulums are in the same proportion as the
square roots of the distances of their centres of oscillation from
their axes.

The investigation of the position of the centre of oscillation is, in
most cases, a subject of intricate mathematical calculation. It depends
on the magnitude and figure of the pendulous body, the manner in which
the mass is distributed through its volume, or the density of its
several parts, and the position of the axis on which it swings.

The place of the centre of oscillation may be determined when the
position of the centre of gravity and the centre of gyration are known;
for the distance of the centre of oscillation from the axis will always
be obtained by dividing the square of the radius of gyration (186.)
by the distance of the centre of gravity from the axis. Thus if 6 be
the radius of gyration, and 9 the distance of gravity from the axis,
36 divided by 9, which is 4, will be the distance of the centre of
oscillation from the axis. Hence it may be inferred generally, that
the greater the proportion which the radius of gyration bears to the
distance of the centre of gravity from the axis, the greater will be
the distance of the centre of oscillation.

It follows from this reasoning, that the length of a pendulum is not
limited by the dimensions of its volume. If the axis be so placed
that the centre of gravity is near it, and the centre of gyration
comparatively removed from it, the centre of oscillation may be placed
far beyond the limits of the pendulous body. Suppose the centre of
gravity is at a distance of one inch from the axis, and the centre
of gyration 12 inches, the centre of oscillation will then be at the
distance of 144 inches, or 12 feet. Such a pendulum may not in its
greatest dimensions exceed one foot, and yet its time of vibration
would be equal to that of a simple pendulum whose length is 12 feet.

By these means pendulums of small dimensions may be made to vibrate as
slowly as may be desired. The instruments called _metronomes_, used
for marking the time of musical performances, are constructed on this
principle.

(214.) The centre of oscillation is distinguished by a very remarkable
property in relation to the axis of suspension. If A, _fig. 76._,
be the point of suspension, and O the corresponding centre of
oscillation, the time of vibration of the pendulum will not be
changed if it be raised from its support, inverted, and suspended from
the point O. It follows, therefore, that if O be taken as the point
of suspension, A will be the corresponding centre of oscillation.
These two points are, therefore, convertible. This property may be
verified experimentally in the following manner. A pendulum being put
into a state of vibration, let a small heavy body be suspended by
a fine thread, the length of which is so adjusted that it vibrates
simultaneously with the pendulum. Let the distance from the point of
suspension to the centre of the vibrating body be measured, and take
this distance on the pendulum from the axis of suspension downwards;
the place of the centre of oscillation will thus be obtained, since
the distance so measured from the axis is the length of the equivalent
simple pendulum. If the pendulum be now raised from its support,
inverted, and suspended from the centre of oscillation thus obtained,
it will be found to vibrate simultaneously with the body suspended by
the thread.

(215.) This property of the interchangeable nature of the centres
of oscillation and suspension has been, at a late period, adopted
by Captain Kater, as an accurate means of determining the length of
a pendulum. Having ascertained with great accuracy two points of
suspension at which the same body will vibrate in the same time, the
distance between these points being accurately measured, is the length
of the equivalent simple pendulum. See Chapter XXI.

(216.) The manner in which the time of vibration of a pendulum
depends on its length being explained, we are next to consider how
this time is affected by the attraction of gravity. It is obvious
that, since the pendulum is moved by this attraction, the rapidity
of its motion will be increased, if the impelling force receive any
augmentation; but it still is to be decided, in what exact proportion
the time of oscillation will be diminished by any proposed increase
in the intensity of the earth’s attraction. It can be demonstrated
mathematically, that the time of one vibration of a pendulum has the
same proportion to the time of falling freely in the perpendicular
direction, through a height equal to half the length of the pendulum,
as the circumference of a circle has to its diameter. Since, therefore,
the times of vibration of pendulums are in a fixed proportion to the
times of falling freely through spaces equal to the halves of their
lengths, it follows that these times have the same relation to the
force of attraction as the times of falling freely through their
lengths have to that force. If the intensity of the force of gravity
were increased in a four-fold proportion, the time of falling through
a given height would be diminished in a two-fold proportion; if the
intensity were increased to a nine-fold proportion, the time of falling
through a given space would be diminished in a three-fold proportion,
and so on; the rate of diminution of the time being always as the
square root of the increased force. By what has been just stated this
law will also be applicable to the vibration of pendulums. Any increase
in the intensity of the force of gravity would cause a given pendulum
to vibrate more rapidly, and the increased rapidity of the vibration
would be in the same proportion as the square root of the increased
intensity of the force of gravity.

(217.) The laws which regulate the times of vibration of pendulums in
relation to one another being well understood, the whole theory of
these instruments will be completed, when the method of ascertaining
the actual time of vibration of any pendulum, in reference to its
length, has been explained. In such an investigation, the two elements
to be determined are, 1. the exact time of a single vibration, and,
2. the exact distance of the centre of oscillation from the point of
suspension.

The former is ascertained by putting a pendulum in motion in the
presence of a good chronometer, and observing precisely the number of
oscillations which are made in any proposed number of hours. The entire
time during which the pendulum swings, being divided by the number of
oscillations made during that time, the exact time of one oscillation
will be obtained.

The distance of the centre of oscillation from the point of suspension
may be rendered a matter of easy calculation, by giving a certain
uniform figure and material to the pendulous body.

(218.) The time of vibration of one pendulum of known length being
thus obtained, we shall be enabled immediately to solve either of the
following problems.

“To find the length of a pendulum which shall vibrate in a given time.”

“To find the time of vibration of a pendulum of a given length.”

The former is solved as follows: the time of vibration of the known
pendulum is to the time of vibration of the required pendulum, as the
square root of the length of the known pendulum is to the square root
of the length of the required pendulum. This length is therefore found
by the ordinary rules of arithmetic.

The latter may be solved as follows: the length of the known pendulum
is to the length of the proposed pendulum, as the square of the time
of vibration of the known pendulum is to the square of the time of
vibration of the proposed pendulum. The latter time may therefore be
found by arithmetic.

(219.) Since the rate of a pendulum has a known relation to the
intensity of the earth’s attraction, we are enabled, by this
instrument, not only to detect certain variations in that attraction in
various parts of the earth, but also to discover the actual amount of
the attraction at any given place.

The actual amount of the earth’s attraction at any given place is
estimated by the height through which a body would fall freely at that
place in any given time, as in one second. To determine this, let the
length of a pendulum which would vibrate in one second at that place
be found. As the circumference of a circle is to its diameter[2] (a
known proportion), so will one second be to the time of falling through
a height equal to half the length of this pendulum. This time is
therefore a matter of arithmetical calculation. It has been proved in
(120.), that the heights, through which a body falls freely, are in the
same proportion as the squares of the times; from whence it follows,
that the square of the time of falling through a height equal to half
the length of the pendulum is to one second as half the length of
that pendulum is to the height through which a body would fall in one
second. This height, therefore, may be immediately computed, and thus
the actual amount of the force of gravity at any given place may be
ascertained.

[2] This ratio is that of 31,416 to 10,000 very nearly.

(220.) To compare the force of gravity in different parts of the earth,
it is only necessary to swing the same pendulum in the places under
consideration, and to observe the rapidity of its vibrations. The
proportion of the force of gravity in the several places will be that
of the squares of the velocity of the vibration. Observations to this
effect have been made at several places, by Biot, Kater, Sabine, and
others.

The earth being a mass of matter of a form nearly spherical, revolving
with considerable velocity on an axis, its component parts are affected
by a centrifugal force; in virtue of which, they have a tendency to fly
off in a direction perpendicular to the axis. This tendency increases
in the same proportion as the distance of any part from the axis
increases, and consequently those parts of the earth which are near the
equator, are more strongly affected by this influence than those near
the pole. It has been already explained (145.) that the figure of the
earth is affected by this cause, and that it has acquired a spheroidal
form. The centrifugal force, acting in opposition to the earth’s
attraction, diminishes its effects; and consequently, where this force
is more efficient, a pendulum will vibrate more slowly. By these means
the rate of vibration of a pendulum becomes an indication of the amount
of the centrifugal force. But this latter varies in proportion to the
distance of the place from the earth’s axis; and thus the rate of a
pendulum indicates the relation of the distances of different parts of
the earth’s surface from its axis. The figure of the earth may be thus
ascertained, and that which theory assigns to it, it may be practically
proved to have.

This, however, is not the only method by which the figure of the earth
may be determined. The meridians being sections of the earth through
its axis, if their figure were exactly determined, that of the earth
would be known. Measurements of arcs of meridians on a large scale have
been executed, and are still being made in various parts of the earth,
with a view to determine the curvature of a meridian at different
latitudes. This method is independent of every hypothesis concerning
the density and internal structure of the earth, and is considered by
some to be susceptible of more accuracy than that which depends on the
observations of pendulums.

(221.) It has been stated that, when the arc of vibration of a pendulum
is not very small, a variation in its length will produce a sensible
effect on the time of vibration. To construct a pendulum such that the
time of vibration may be independent of the extent of the swing, was a
favourite speculation of geometers. This problem was solved by Huygens,
who showed that the curve called a _cycloid_, previously discovered and
described by Galileo, possessed the isochronal property; that is, that
a body moving in it by the force of gravity, would vibrate in the same
time, whatever be the length of the arc described.

Let O A, _fig. 77._, be a horizontal line, and let O B
be a circle placed below this line, and in contact with it. If this
circle be rolled upon the line from O towards A, a point upon its
circumference, which at the beginning of the motion is placed at O,
will during the motion trace the curve O C A. This curve is
called a _cycloid_. If the circle be supposed to roll in the opposite
direction towards A′, the same point will trace another cycloid
O C′ A′. The points C and C′ being the lowest points of the
curves, if the perpendiculars C D and C′ D′ be drawn, they
will respectively be equal to the diameter of the circle. By a known
property of this curve, the arcs O C and O C′ are equal to
twice the diameter of the circle. From the point O suppose a flexible
thread to be suspended, whose length is twice the diameter of the
circle, and which sustains a pendulous body P at its extremity. If
the curves O C and O C′, from the plane of the paper, be
raised so as to form surfaces to which the thread may be applied, the
extremity P will extend to the points C and C′, when the entire thread
has been applied to either of the curves. As the thread is deflected
on either side of its vertical position, it is applied to a greater
or lesser portion of either curve, according to the quantity of its
deflection from the vertical. If it be deflected on each side until
the point P reaches the points C and C′, the extremity would trace a
cycloid C P C′ precisely equal and similar to those already
mentioned. Availing himself of this property of the curve, Huygens
constructed his cycloidal pendulum. The time of vibration was subject
to no variation, however the arc of vibration might change, provided
only that the length of the string O P continued the same. If
small arcs of the cycloid be taken on either side of the point P, they
will not sensibly differ from arcs of a circle described with the
centre O and the radius O P; for, in slight deflections from the
vertical position, the effect of the curves O C and O C′ on
the thread O P is altogether inconsiderable. It is for this reason
that when the arcs of vibration of a circular pendulum are small, they
partake of the property of isochronism peculiar to those of a cycloid.
But when the deflection of P from the vertical is great, the effect of
the curves O C and O C′ on the thread produces a considerable
deviation of the point P from the arc of the circle whose centre is
O and whose radius is O P, and consequently the property of
isochronism will no longer be observed in the circular pendulum.




CHAP. XII.

OF SIMPLE MACHINES.


(222.) A MACHINE is an instrument by which force or motion may be
transmitted and modified as to its quantity and direction. There are
two ways in which a machine may be applied, and which give rise to
a division of mechanical science into parts denominated STATICS and
DYNAMICS; the one including the theory of equilibrium, and the other
the theory of motion. When a machine is considered statically, it is
viewed as an instrument by which forces of determinate quantities
and direction are made to balance other forces of other quantities
and other directions. If it be viewed dynamically, it is considered
as a means by which certain motions of determinate quantity and
direction may be made to produce other motions in other directions
and quantities. It will not be convenient, however, in the present
treatise, to follow this division of the subject. We shall, on the
other hand, as hitherto, consider the phenomena of equilibrium and
motion together.

The effects of machinery are too frequently described in such a manner
as to invest them with the appearance of paradox, and to excite
astonishment at what appears to contradict the results of the most
common experience. It will be our object here to take a different
course, and to attempt to show that those effects which have been held
up as matters of astonishment are the necessary, natural, and obvious
results of causes adapted to produce them in a manner analogous to the
objects of most familiar experience.

(223.) In the application of a machine there are three things to
be considered. 1. The force or resistance which is required to be
sustained, opposed, or overcome. 2. The force which is used to sustain,
support, or overcome that resistance. 3. The machine itself by which
the effect of this latter force is transmitted to the former. Of
whatever nature be the force or the resistance which is to be sustained
or overcome, it is technically called the _weight_, since, whatever it
be, a weight of equivalent effect may always be found. The force which
is employed to sustain or overcome it is technically called the _power_.

(224.) In expressing the effect of machinery it is usual to say that
the power sustains the weight; but this, in fact, is not the case, and
hence arises that appearance of paradox which has already been alluded
to. If, for example, it is said that a power of one ounce sustains the
weight of one ton, astonishment is not unnaturally excited, because
the fact, as thus stated, if the terms be literally interpreted, is
physically impossible. No power less than a ton can, in the ordinary
acceptation of the word, support the weight of a ton. It will, however,
be asked how it happens that a machine _appears_ to do this? how it
happens that by holding a silken thread, which an ounce weight would
snap, many hundred weight may be sustained? To explain this it will
only be necessary to consider the effect of a machine, when the power
and weight are in equilibrium.

(225.) In every machine there are some fixed points or props; and the
arrangement of the parts is always such, that the pressure, excited by
the power or weight, or both, is distributed among these props. If the
weight amount to twenty hundred, it is possible so to distribute it,
that any proportion, however great, of it may be thrown on the fixed
points or props of the machine; the remaining part only can properly be
said to be supported by the power, and this part can never be greater
than the power. Considering the effect in this way, it appears that
the power supports just so much of the weight and no more as is equal
to its own force, and that all the remaining part of the weight is
sustained by the machine. The force of these observations will be more
apparent when the nature and properties of the mechanic powers and
other machines have been explained.

(226.) When a machine is considered dynamically, its effects are
explained on different principles. It is true that, in this case, a
very small power may elevate a very great weight; but nevertheless,
in so doing, whatever be the machine used, the total expenditure of
power, in raising the weight through any height, is never less than
that which would be expended if the power were immediately applied to
the weight without the intervention of any machine. This circumstance
arises from an universal property of machines by which the velocity of
the weight is always less than that of the power, in exactly the same
proportion as the power itself is less than the weight; so that when
a certain power is applied to elevate a weight, the rate at which the
elevation is effected is always slow in the same proportion as the
weight is great. From a due consideration of this remarkable law, it
will easily be understood, that a machine can never diminish the total
expenditure of power necessary to raise any weight or to overcome any
resistance. In such cases, all that a machine ever does or ever can
do, is to enable the power to be expended at a slow rate, and in a
more advantageous direction than if it were immediately applied to the
weight or the resistance.

Let us suppose that P is a power amounting to an ounce, and that W is
a weight amounting to 50 ounces, and that P elevates W by means of a
machine. In virtue of the property already stated, it follows, that
while P moves through 50 feet, W will be moved through 1 foot; but
in moving P through 50 feet, 50 distinct efforts are made, by each
of which 1 ounce is moved through 1 foot, and by which collectively
50 distinct ounces might be successively raised through 1 foot. But
the weight W is 50 ounces, and has been raised through 1 foot; from
whence it appears, that the expenditure of power is equal to that which
would be necessary to raise the weight without the intervention of any
machine.

This important principle may be presented under another aspect, which
will perhaps render it more apparent. Suppose the weight W were
actually divided into 50 equal parts, or suppose it were a vessel of
liquid weighing 50 ounces, and containing 50 equal measures; if these
50 measures were successively lifted through a height of 1 foot; the
efforts necessary to accomplish this would be the same as those used
to move the power P through 50 feet, and it is obvious, that the total
expenditure of force would be the same as that which would be necessary
to lift the entire contents of the vessel through 1 foot.

When the nature and properties of the mechanic powers and other
machines have been explained, the force of these observations will be
more distinctly perceived. The effects of props and fixed points in
sustaining a part of the weight, and sometimes the whole, both of the
weight and power, will then be manifest, and every machine will furnish
a verification of the remarkable proportion between the velocities
of the weight and power, which has enabled us to explain what might
otherwise be paradoxical and difficult of comprehension.

(227.) The most simple species of machines are those which are commonly
denominated the MECHANIC POWERS. These have been differently enumerated
by different writers. If, however, the object be to arrange in distinct
classes, and in the smallest possible number of them, those machines
which are alike in principle, the mechanic powers may be reduced to
three.

  1. The lever.
  2. The cord.
  3. The inclined plane.

To one or other of these classes all simple machines whatever may be
reduced, and all complex machines may be resolved into simple elements
which come under them.

(228.) The first class includes every machine which is composed of
a solid body revolving on a fixed axis, although the name lever has
been commonly confined to cases where the machine affects certain
particular forms. This is by far the most useful class of machines, and
will require in subsequent chapters very detailed development. The
general principle, upon which equilibrium is established between the
power and weight in machines of this class has been already explained
in (183.) The power and weight are always supposed to be applied in
directions at right angles to the axis. If lines be drawn from the axis
perpendicular to the directions of power and weight, equilibrium will
subsist, provided the power multiplied by the perpendicular distance
of its direction from the axis, be equal to the weight multiplied by
the perpendicular distance of its direction from the axis. This is a
principle to which we shall have occasion to refer in explaining the
various machines of this class.

(229.) If the moment of the power (184.) be greater than that of the
weight, the effect of the power will prevail over that of the weight,
and elevate it; but if, on the other hand, the moment of the power be
less than that of the weight, the power will be insufficient to support
the weight, and will allow it to fall.

(230.) The second class of simple machines includes all those cases
in which force is transmitted by means of flexible threads, ropes,
or chains. The principle, by which the effects of these machines are
estimated, is, that the tension throughout the whole length of the same
cord, provided it be perfectly flexible, and free from the effects
of friction, must be the same. Thus, if a force acting at one end be
balanced by a force acting at the other end, however the cord may be
bent, or whatever course it may be compelled to take, by any causes
which may affect it between its ends, these forces must be equal,
provided the cord be free to move over any obstacles which may deflect
it.

Within this class of machines are included all the various forms of
_pulleys_.

(231.) The third class of simple machines includes all those cases in
which the weight or resistance is supported or moved on a hard surface
inclined to the vertical direction.

The effects of such machines are estimated by resolving the whole
weight of the body into two elements by the parallelogram of forces.
One of these elements is perpendicular to the surface, and supported
by its resistance; the other is parallel to the surface, and supported
by the power. The proportion, therefore, of the power to the weight
will always depend on the obliquity of the surface to the direction of
the weight. This will be easily understood by referring to what has
been already explained in Chapter VIII.

Under this class of machines come the inclined plane, commonly so
called, the wedge, the screw, and various others.

(232.) In order to simplify the development of the elementary theory
of machines, it is expedient to omit the consideration of many
circumstances, of which, however, a strict account must be taken before
any practically useful application of that theory can be attempted.
A machine, as we must for the present contemplate it, is a thing
which can have no real or practical existence. Its various parts are
considered to be free from friction: all surfaces which move in contact
are supposed to be infinitely smooth and polished. The solid parts are
conceived to be absolutely inflexible. The weight and inertia of the
machine itself are wholly neglected, and we reason upon it as if it
were divested of these qualities. Cords and ropes are supposed to have
no stiffness, to be infinitely flexible. The machine, when it moves, is
supposed to suffer no resistance from the atmosphere, and to be in all
respects circumstanced as if it were _in vacuo_.

It is scarcely necessary to state, that, all these suppositions
being false, none of the consequences deduced from them can be true.
Nevertheless, as it is the business of art to bring machines as near
to this state of ideal perfection as possible, the conclusions which
are thus obtained, though false in a strict sense, yet deviate from
the truth in but a small degree. Like the first outline of a picture,
they resemble in their general features that truth to which, after many
subsequent corrections, they must finally approximate.

After a first approximation has been made on the several false
suppositions which have been mentioned, various effects, which have
been previously neglected, are successively taken into account.
Roughness, rigidity, imperfect flexibility, the resistance of air and
other fluids, the effects of the weight and inertia of the machine,
are severally examined, and their laws and properties detected. The
modifications and corrections, thus suggested as necessary to be
introduced into our former conclusions, are applied, and a second
approximation, but still _only_ an approximation, to truth is made.
For, in investigating the laws which regulate the several effects
just mentioned, we are compelled to proceed upon a new group of false
suppositions. To determine the laws which regulate the friction of
surfaces, it is necessary to assume that every part of the surfaces of
contact are uniformly rough; that the solid parts which are imperfectly
rigid, and the cords which are imperfectly flexible, are constituted
throughout their entire dimensions of a uniform material; so that the
imperfection does not prevail more in one part than another. Thus,
all irregularity is left out of account, and a general average of the
effects taken. It is obvious, therefore, that by these means we have
still failed in obtaining a result exactly conformable to the real
state of things; but it is equally obvious, that we have obtained
one much more conformable to that state than had been previously
accomplished, and sufficiently near it for most practical purposes.

This apparent imperfection in our instruments and powers of
investigation is not peculiar to mechanics: it pervades all departments
of natural science. In astronomy, the motions of the celestial bodies,
and their various changes and appearances as developed by theory,
assisted by observation and experience, are only approximations to the
real motions and appearances which take place in nature. It is true
that these approximations are susceptible of almost unlimited accuracy;
but still they are, and ever will continue to be, only approximations.
Optics and all other branches of natural science are liable to the same
observations.




CHAP. XIII.

OF THE LEVER.


(233.) An inflexible, straight bar, turning on an axis, is commonly
called a _lever_. The _arms_ of the lever are those parts of the bar
which extend on each side of the axis.

The axis is called the _fulcrum_ or _prop_.

(234.) Levers are commonly divided into three kinds, according to the
relative positions of the power, the weight, and the fulcrum.

In a lever of the first kind, as in _fig. 78._, the fulcrum is
between the power and weight.

In a lever of the second kind, as in _fig. 79._, the weight is
between the fulcrum and power.

In a lever of the third kind, as in _fig. 80._, the power is
between the fulcrum and weight.

(235.) In all these cases, the power will sustain the weight in
equilibrium, provided its moment be equal to that of the weight. (184.)
But the moment of the power is, in this case, equal to the product
obtained by multiplying the power by its distance from the fulcrum; and
the moment of the weight by multiplying the weight by its distance from
the fulcrum. Thus, if the number of ounces in P, being multiplied by
the number of inches in P F, be equal to the number of ounces in
W, multiplied by the number of inches in W F, equilibrium will be
established. It is evident from this, that as the distance of the power
from the fulcrum increases in comparison to the distance of the weight
from the fulcrum, in the same degree exactly will the proportion of the
power to the weight diminish. In other words, the proportion of the
power to the weight will be always the same as that of their distances
from the fulcrum taken in a reverse order.

In cases where a small power is required to sustain or elevate a great
weight, it will therefore be necessary either to remove the power to a
great distance from the fulcrum, or to bring the weight very near it.

(236.) Numerous examples of levers of the first kind may be given. A
crow-bar, applied to elevate a stone or other weight, is an instance.
The fulcrum is another stone placed near that which is to be raised,
and the power is the hand placed at the other end of the bar.

A handspike is a similar example.

A poker applied to raise fuel is a lever of the first kind, the fulcrum
being the bar of the grate.

Scissors, shears, nippers, pincers, and other similar instruments are
composed of two levers of the first kind; the fulcrum being the joint
or pivot, and the weight the resistance of the substance to be cut or
seized; the power being the fingers applied at the other end of the
levers.

The brake of a pump is a lever of the first kind; the pump-rods and
piston being the weight to be raised.

(237.) Examples of levers of the second kind, though not so frequent as
those just mentioned, are not uncommon.

An oar is a lever of the second kind. The reaction of the water against
the blade is the fulcrum. The boat is the weight, and the hand of the
boatman the power.

The rudder of a ship or boat is an example of this kind of lever, and
explained in a similar way.

The chipping knife is a lever of the second kind. The end attached
to the bench is the fulcrum, and the weight the resistance of the
substance to be cut, placed beneath it.

A door moved upon its hinges is another example.

Nut-crackers are two levers of the second kind; the hinge which unites
them being the fulcrum, the resistance of the shell placed between
them being the weight, and the hand applied to the extremity being the
power.

A wheelbarrow is a lever of the second kind; the fulcrum being the
point at which the wheel presses on the ground, and the weight being
that of the barrow and its load, collected at their centre of gravity.

The same observation may be applied to all two-wheeled carriages, which
are partly sustained by the animal which draws them.

(238.) In a lever of the third kind, the weight, being more distant
from the fulcrum than the power, must be proportionably less than
it. In this instrument, therefore, the power acts upon the weight to
a mechanical disadvantage, inasmuch as a greater power is necessary
to support or move the weight than would be required if the power
were immediately applied to the weight, without the intervention of a
machine. We shall, however, hereafter show that the advantage which
is lost in force is gained in despatch, and that in proportion as the
weight is less than the power which moves it, so will the speed of its
motion be greater than that of the power.

Hence a lever of the third kind is only used in cases where the
exertion of great power is a consideration subordinate to those of
rapidity and despatch.

The most striking example of levers of the third kind is found in the
animal economy. The limbs of animals are generally levers of this
description. The socket of the bone is the fulcrum; a strong muscle
attached to the bone near the socket is the power; and the weight
of the limb, together with whatever resistance is opposed to its
motion, is the weight. A slight contraction of the muscle in this case
gives a considerable motion to the limb: this effect is particularly
conspicuous in the motion of the arms and legs in the human body; a
very inconsiderable contraction of the muscles at the shoulders and
hips giving the sweep to the limbs from which the body derives so much
activity.

The treddle of the turning lathe is a lever of the third kind. The
hinge which attaches it to the floor is the fulcrum, the foot applied
to it near the hinge is the power, and the crank upon the axis of the
fly-wheel, with which its extremity is connected, is the weight.

Tongs are levers of this kind, as also the shears used in shearing
sheep. In these cases the power is the hand placed immediately below
the fulcrum or point where the two levers are connected.

(239.) When the power is said to support the weight by means of a lever
or any other machine, it is only meant that the power keeps the machine
in equilibrium, and thereby enables it to sustain the weight. It is
necessary to attend to this distinction, to remove the difficulty which
may arise from the paradox of a small power sustaining a great weight.

In a lever of the first kind, the fulcrum F, _fig. 78._, or axis,
sustains the united forces of the power and weight.

In a lever of the second kind, if the power be supposed to act over
a wheel R, _fig. 79._, the fulcrum F sustains a pressure equal
to the difference between the power and weight, and the axis of the
wheel R sustains a pressure equal to twice the power; so that the total
pressures on F and R are equivalent to the united forces of the power
and weight.

In a lever of the third kind similar observations are applicable. The
wheel R, _fig. 80._, sustains a pressure equal to twice the power,
and the fulcrum F sustains a pressure equal to the difference between
the power and weight.

These facts may be experimentally established by attaching a string
to the lever immediately over the fulcrum, and suspending the lever
by that string from the arm of a balance. The counterpoising weight,
when the fulcrum is removed, will, in the first case, be equal to the
sum of the weight and power, and in the last two cases equal to their
difference.

(240.) We have hitherto omitted the consideration of the effect of the
weight of the lever itself. If the centre of gravity of the lever be
in the vertical line through the axis, the weight of the instrument
will have no other effect than to increase the pressure on the axis by
its own amount. But if the centre of gravity be on the same side of
the axis with the weight, as at G, it will oppose the effect of the
power, a certain part of which must therefore be allowed to support
it. To ascertain what part of the power is thus expended, it is to
be considered that the moment of the weight of the lever collected
at G, is found by multiplying that weight by the distance G F.
The moment of that part of the power which supports this must be
equal to it; therefore, it is only necessary to find how much of the
power multiplied by P F will be equal to the weight of the lever
multiplied by G F. This is a question in common arithmetic.

If the centre of gravity of the lever be at a different side of the
axis from the weight, as at G′, the weight of the instrument will
co-operate with the power in sustaining the weight W. To determine what
portion of the weight W is thus sustained by the weight of the lever,
it is only necessary to find how much of W, multiplied by the distance
W F, is equal to the weight of the lever multiplied by G′ F.

In these cases the pressure on the fulcrum, as already estimated, will
always be increased by the weight of the lever.

(241.) The sense in which a small power is said to sustain a great
weight, and the manner of accomplishing this, being explained, we
shall now consider how the power is applied in moving the weight. Let
P W, _fig. 81._, be the places of the power and weight, and
F that of the fulcrum, and let the power be depressed to P′ while the
weight is raised to W′. The space P P′ evidently bears the same
proportion to W W′, as the arm P F to W F. Thus if
P F be ten times W F, P P′ will be ten times W W′.
A power of one pound at P being moved from P to P′, will carry a weight
of ten pounds from W to W′. But in this case it ought not to be said,
that a lesser weight moves a greater, for it is not difficult to show,
that the total expenditure of force in the motion of one pound from P
to P′ is exactly the same as in the motion of ten pounds from W to W′.
If the space P P′ be ten inches, the space W W′ will be one
inch. A weight of one pound is therefore moved through ten successive
inches, and in each inch the force expended is that which would be
sufficient to move one pound through one inch. The total expenditure
of force from P to P′ is ten times the force necessary to move one
pound through one inch, or what is the same, it is that which would be
necessary to move ten pounds through one inch. But this is exactly what
is accomplished by the opposite end W of the lever; for the weight W is
ten pounds, and the space W W′ is one inch.

If the weight W of ten pounds could be conveniently divided into ten
equal parts of one pound each, each part might be separately raised
through one inch, without the intervention of the lever or any other
machine. In this case, the same quantity of power would be expended,
and expended in the same manner as in the case just mentioned.

It is evident, therefore, that when a machine is applied to raise a
weight or to overcome resistance, as much force must be really used as
if the power were immediately applied to the weight or resistance. All
that is accomplished by the machine is to enable the power to do that
by a succession of distinct efforts which should be otherwise performed
by a single effort. These observations will be found to be applicable
to all machines whatever.

(242.) Weighing machines of almost every kind, whether used for
commercial or philosophical purposes, are varieties of the lever. The
common balance, which, of all weighing machines, is the most perfect
and best adapted for ordinary use, whether in commerce or experimental
philosophy, is a lever with equal arms. In the steel-yard one weight
serves as a counterpoise and measure of others of different amount, by
receiving a leverage variable according to the varying amount of the
weight against which it acts. A detailed account of such instruments
will be found in Chapter XXI.

(243.) We have hitherto considered the power and weight as acting on
the lever, in directions perpendicular to its length and parallel to
each other. This does not always happen. Let A B, _fig. 83._,
be a lever whose fulcrum is F, and let A R be the direction of the
power, and B S the direction of the weight. If the lines R A
and S B be continued, and perpendiculars F C and F D
drawn from the fulcrum to those lines, the moment of the power will be
found by multiplying the power by the line F C, and the moment of
the weight by multiplying the weight by F D. If these moments be
equal, the power will sustain the weight in equilibrium. (185).

It is evident, that the same reasoning will be applicable when the
arms of the lever are not in the same direction. These arms may be of
any figure or shape, and may be placed relatively to each other in any
position.

(244.) In the rectangular lever the arms are perpendicular to each
other, and the fulcrum F, _fig. 84._, is at the right angle. The
moment of the power, in this case, is P multiplied by A F, and
that of the weight W multiplied by B F. When the instrument is in
equilibrium these moments must be equal.

When the hammer is used for drawing a nail, it is a lever of this kind:
the claw of the hammer is the shorter arm; the resistance of the nail
is the weight; and the hand applied to the handle the power.

(245.) When a beam rests on two props A B, _fig. 85._, and
supports, at some intermediate place C, a weight W, this weight is
distributed between the props in a manner which may be determined by
the principles already explained. If the pressure on the prop B be
considered as a power sustaining the weight W, by means of the lever of
the second kind B A, then this power multiplied by B A must
be equal to the weight multiplied by C A. Hence the pressure on
B will be the same fraction of the weight as the part A C is of
A B. In the same manner it may be proved, that the pressure on A
is the same fraction of the weight as B C is of B A. Thus, if
A C be one third, and therefore B C two thirds of B A,
the pressure on B will be one third of the weight, and the pressure on
A two thirds of the weight.

It follows from this reasoning, that if the weight be in the middle,
equally distant from B and A, each prop will sustain half the weight.
The effect of the weight of the beam itself may be determined by
considering it to be collected at its centre of gravity. If this point,
therefore, be equally distant from the props, the weight of the beam
will be equally distributed between them.

According to these principles, the manner in which a load borne
on poles between two bearers is distributed between them may be
ascertained. As the efforts of the bearers and the direction of the
weight are always parallel; the position of the poles relatively to the
horizon makes no difference in the distribution of the weights between
the bearers. Whether they ascend or descend, or move on a level plane,
the weight will be similarly shared between them.

If the beam extend beyond the prop, as in _fig. 86._, and the
weight be suspended at a point not placed between them, the props must
be applied at different sides of the beam. The pressures which they
sustain may be calculated in the same manner as in the former case.
The pressure of the prop B may be considered as a power sustaining the
weight W by means of the lever B C. Hence, the pressure of B,
multiplied by B A, must be equal to the weight W multiplied by
A C. Therefore, the pressure on B bears the same proportion to the
weight as A C does to A B. In the same manner, considering B
as a fulcrum, and the pressure of the prop A as the power, it may be
proved that the pressure of A bears the same proportion to the weight
as the line B C does to A B. It therefore appears, that the
pressure on the prop A is greater than the weight.

(246.) When great power is required, and it is inconvenient to
construct a long lever, a combination of levers may be used. In
_fig. 87._ such a system of levers is represented, consisting of
three levers of the first kind. The manner in which the effect of the
power is transmitted to the weight may be investigated by considering
the effect of each lever successively. The power at P produces an
upward force at P′, which bears to P the same proportion as P′ F
to P F. Therefore, the effect at P′ is as many times the power
as the line P F is of P′ F. Thus, if P F be ten times
P′ F, the upward force at P′ is ten times the power. The arm
P′ F′ of the second lever is pressed upwards by a force equal
to ten times the power at P. In the same manner this may be shown to
produce an effect at P″ as many times greater than P′ as P′ F′
is greater than P″ F′. Thus, if P′ F′ be twelve times P″ F′, the
effect at P″ will be twelve times that of P′. But this last was ten
times the power, and therefore the P″ will be one hundred and twenty
times the power. In the same manner it may be shown that the weight is
as many times greater than the effect at P″ as P″ F″ is greater than
W F″. If P″ F″ be five times W F″, the weight will be five
times the effect at P″. But this effect is one hundred and twenty times
the power, and therefore the weight would be six hundred times the
power.

In the same manner the effect of any compound system of levers may be
ascertained by taking the proportion of the weight to the power in
each lever separately, and multiplying these numbers together. In the
example given, these proportions are 10, 12, and 5, which multiplied
together give 600. In _fig. 87._ the levers composing the system
are of the first kind; but the principles of the calculation will not
be altered if they be of the second or third kind, or some of one kind
and some of another.

(247.) That number which expresses the proportion of the weight to the
equilibrating power in any machine, we shall call the _power of the
machine_. Thus, if, in a lever, a power of one pound support a weight
of ten pounds, the power of the machine is _ten_. If a power of 2lbs.
support a weight of 11lbs., the power of the machine is 5-1/2, 2 being
contained in 11 5-1/2 times.

(248.) As the distances of the power and weight from the fulcrum of
a lever may be varied at pleasure, and any assigned proportion given
to them, a lever may always be conceived having a power equal to that
of any given machine. Such a lever may be called, in relation to that
machine, the _equivalent lever_.

As every complex machine consists of a number of simple machines acting
one upon another, and as each simple machine may be represented by an
equivalent lever, the complex machine will be represented by a compound
system of equivalent levers. From what has been proved in (246.), it
therefore follows that the power of a complex machine may be calculated
by multiplying together the powers of the several simple machines of
which it is composed.




CHAP. XIV.

OF WHEEL-WORK.


(249.) When a lever is applied to raise a weight, or overcome a
resistance, the space through which it acts at any one time is small,
and the work must be accomplished by a succession of short and
intermitting efforts. In _fig. 81._, after the weight has been
raised from W to W′, the lever must again return to its first position,
to repeat the action. During this return the motion of the weight is
suspended, and it will fall downwards unless some provision be made to
sustain it. The common lever is, therefore, only used in cases where
weights are required to be raised through small spaces, and under these
circumstances its great simplicity strongly recommends it. But where
a continuous motion is to be produced, as in raising ore from the
mine, or in weighing the anchor of a vessel, some contrivance must be
adopted to remove the intermitting action of the lever, and render
it continual. The various forms given to the lever, with a view to
accomplish this, are generally denominated the _wheel and axle_.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

In _fig. 88._, A B is a horizontal axle, which rests in
pivots at its extremities, or is supported in gudgeons, and capable of
revolving. Round this axis a rope is coiled, which sustains the weight
W. On the same axis a wheel C is fixed, round which a rope is coiled
in a contrary direction, to which is appended the power P. The moment
of the power is found by multiplying it by the radius of a wheel, and
the moment of the weight, by multiplying it by the radius of its axle.
If these moments be equal (185.), the machine will be in equilibrium.
Whence it appears that the power of the machine (247.) is expressed by
the proportion which the radius of the wheel bears to the radius of
the axle; or, what is the same, of the diameter of the wheel to the
diameter of the axle. This principle is applicable to the wheel and
axle in every variety of form under which it can be presented.

(250.) It is evident that as the power descends continually, and the
rope is uncoiled from the wheel, the weight will be raised continually,
the rope by which it is suspended being at the same time coiled upon
the axle.

When the machine is in equilibrium, the forces of both the weight and
power are sustained by the axle, and distributed between its props, in
the manner explained in (245.)

When the machine is applied to raise a weight, the velocity with which
the power moves is as many times greater than that with which the
weight rises, as the weight itself is greater than the power. This is
a principle which has already been noticed, and which is common to all
machines whatsoever. It may hence be proved, that in the elevation of
the weight a quantity of power is expended equal to that which would be
necessary to elevate the weight if the power were immediately applied
to it, without the intervention of any machine. This has been explained
in the case of the lever in (241.), and may be explained in the
present instance in nearly the same words.

In one revolution of the machine the length of rope uncoiled from
the wheel is equal to the circumference of the wheel, and through
this space the power must therefore move. At the same time the length
of rope coiled upon the axle is equal to the circumference of the
axle, and through this space the weight must be raised. The spaces,
therefore, through which the power and weight move in the same time,
are in the proportion of the circumferences of the wheel and axle; but
these circumferences are in the same proportion as their diameters.
Therefore the velocity of the power will bear to the velocity of the
weight the same proportion as the diameter of the wheel bears to the
diameter of the axle, or, what is the same, as the weight bears to the
power (249).

(251.) We have here omitted the consideration of the thickness of the
rope. When this is considered, the force must be conceived as acting in
the direction of the centre of the rope, and therefore the thickness
of the rope which supports the power ought to be added to the diameter
of the wheel, and the thickness of the rope which supports the weight
to the diameter of the axle. It is the more necessary to attend to
this circumstance, as the strength of the rope necessary to support
the weight causes its thickness to bear a considerable proportion to
the diameter of the axle; while the rope which sustains the power not
requiring the same strength, and being applied to a larger circle,
bears a very inconsiderable proportion to its diameter.

(252.) In numerous forms of the wheel and axle, the weight or
resistance is applied by a rope coiled upon the axle; but the manner in
which the power is applied is very various, and not often by means of a
rope. The circumference of a wheel sometimes carries projecting pins,
as represented in _fig. 88._, to which the hand is applied to
turn the machine. An instance of this occurs in the wheel used in the
steerage of a vessel.

In the common _windlass_, the power is applied by means of a _winch_,
which is a rectangular lever, as represented in _fig. 89._ The arm
B C of the winch represents the radius of the wheel, and the power
is applied to C D at right angles to B C.

In some cases no wheel is attached to the axle; but it is pierced with
holes directed towards its centre, in which long levers are incessantly
inserted, and a continuous action produced by several men working at
the same time; so that while some are transferring the levers from hole
to hole, others are working the windlass.

The axle is sometimes placed in a vertical position, the wheel or
levers being moved horizontally. The _capstan_ is an example of this:
a vertical axis is fixed in the deck of the ship; the circumference is
pierced with holes presented towards its centre. These holes receive
long levers, as represented in _fig. 90._ The men who work the
capstan walk continually round the axle, pressing forward the levers
near their extremities.

In some cases the wheel is turned by the weight of animals placed at
its circumference, who move forward as fast as the wheel descends,
so as to maintain their position continually at the extremity of the
horizontal diameter. The _treadmill_, _fig. 91._, and certain
_cranes_, such as _fig. 92._, are examples of this.

In water-wheels, the power is the weight of water contained in
buckets at the circumference, as in _fig. 93._, which is called
an over-shot wheel: and sometimes by the impulse of water against
float-boards at the circumference, as in the under-shot wheel,
_fig. 94._ Both these principles act in the breast-wheel,
_fig. 95._

In the paddle-wheel of a steam-boat, the power is the resistance which
the water offers to the motion of the paddle-boards.

In windmills, the power is the force of the wind acting on various
parts of the arms, and may be considered as different powers
simultaneously acting on different wheels having the same axle.

(253.) In most cases in which the wheel and axle is used, the action of
the power is liable to occasional suspension or intermission, in which
case some contrivance is necessary to prevent the recoil of the weight.
A ratchet wheel R, _fig. 88._, is provided for this purpose, which
is a contrivance which permits the wheel to turn in one direction;
but a catch which falls between the teeth of a fixed wheel prevents
its motion in the other direction. The effect of the power or weight
is sometimes transmitted to the wheel or axle by means of a straight
bar, on the edge of which teeth are raised, which engage themselves in
corresponding teeth on the wheel or axle. Such a bar is called a rack;
and an instance of its use may be observed in the manner of working the
pistons of an air-pump.

(254.) The power of the wheel and axle being expressed by the number
of times the diameter of the axle is contained in that of the wheel,
there are obviously only two ways by which this power may be increased;
viz. either by increasing the diameter of the wheel, or diminishing
that of the axle. In cases where great power is required, each of these
methods is attended with practical inconvenience and difficulty. If the
diameter of the wheel be considerably enlarged, the machine will become
unwieldy, and the power will work through an unmanageable space. If,
on the other hand, the power of the machine be increased by reducing
the thickness of the axle, the strength of the axle will become
insufficient for the support of that weight, the magnitude of which had
rendered the increase of the power of the machine necessary. To combine
the requisite strength with moderate dimensions and great mechanical
power is, therefore, impracticable in the ordinary form of the wheel
and axle. This has, however, been accomplished by giving different
thicknesses to different parts of the axle, and carrying a rope, which
is coiled on the thinner part, through a wheel attached to the weight,
and coiling it in the opposite direction on the thicker part, as in
_fig. 96._ To investigate the proportion of the power to the
weight in this case, let _fig. 97._ represent a section of the
apparatus at right angles to the axis. The weight is equally suspended
by the two parts of the rope, S and S′, and therefore each part is
stretched by a force equal to half the weight. The moment of the force,
which stretches the rope S, is half the weight multiplied by the radius
of the thinner part of the axle. This force being at the same side of
the centre with the power, co-operates with it in supporting the force
which stretches S′, and which acts at the other side of the centre. By
the principle established in (185.), the moments of P and S must be
equal to that of S′; and therefore if P be multiplied by the radius of
the wheel, and added to half the weight multiplied by the radius of the
thinner part of the axle, we must obtain a sum equal to half the weight
multiplied by the radius of the thicker part of the axle. Hence it is
easy to perceive, that the power multiplied by the radius of the wheel
is equal to half the weight multiplied by the difference of the radii
of the thicker and thinner parts of the axle; or, what is the same, the
power multiplied by the diameter of the wheel, is equal to the weight
multiplied by half the difference of the diameters of the thinner and
thicker parts of the axle.

A wheel and axle constructed in this manner is equivalent to an
ordinary one, in which the wheel has the same diameter, and whose axle
has a diameter equal to half the difference of the diameters of the
thicker and thinner parts. The power of the machine is expressed by the
proportion which the diameter of the wheel bears to half the difference
of these diameters; and therefore this power, when the diameter of the
wheel is given, does not, as in the ordinary wheel and axle, depend
on the smallness of the axle, but on the smallness of the difference
of the thinner and thicker parts of it. The axle may, therefore,
be constructed of such a thickness as to give it all the requisite
strength, and yet the difference of the diameters of its different
parts may be so small as to give it all the requisite power.

(255.) It often happens that a varying weight is to be raised, or
resistance overcome by a uniform power. If, in such a case, the weight
be raised by a rope coiled upon a uniform axle, the action of the
power would not be uniform, but would vary with the weight. It is,
however, in most cases desirable or necessary that the weight or
resistance, even though it vary, shall be moved uniformly. This will
be accomplished if by any means the leverage of the weight is made
to increase in the same proportion as the weight diminishes, and to
diminish in the same proportion as the weight increases: for in that
case the moment of the weight will never vary, whatever it gains by the
increase of weight being lost by the diminished leverage, and whatever
it loses by the diminished weight being gained by the increased
leverage. An axle, the surface of which is curved in such a manner,
that the thickness on which the rope is coiled continually increased
or diminishes in the same proportion as the weight or resistance
diminishes or increases, will produce this effect.

It is obvious that all that has been said respecting a variable
weight or resistance, is also applicable to a variable power, which,
therefore, may, by the same means, be made to produce a uniform effect.
An instance of this occurs in a watch, which is moved by a spiral
spring. When the watch has been wound up, this spring acts with its
greatest intensity, and as the watch goes down, the elastic force of
the spring gradually loses its energy. This spring is connected by a
chain with an axle of varying thickness, called a _fusee_. When the
spring is at its greatest intensity, the chain acts upon the thinnest
part of the fusee, and as it is uncoiled it acts upon a part of the
fusee which is continually increasing in thickness, the spring at the
same time losing its elastic power in exactly the same proportion. A
representation of the fusee, and the cylindrical box which contains
the spring, is given in _fig. 98._, and of the spring itself in
_fig. 99._

(256.) When great power is required, wheels and axles may be combined
in a manner analogous to a compound system of levers, explained
in (246.) In this case the power acts on the circumference of the
first wheel, and its effect is transmitted to the circumference
of the first axle. That circumference is placed in connection with
the circumference of the second wheel, and the effect is thereby
transmitted to the circumference of the second axle, and so on. It
is obvious from what was proved in (248.), that the power of such a
combination of wheels and axles will be found by multiplying together
the powers of the several wheels of which it is composed. It is
sometimes convenient to compute this power by numbers expressing the
proportions of the circumferences or diameters of the several wheels,
to the circumferences or diameters of the several axles respectively.
This computation is made by first multiplying the numbers together
which express the circumferences or diameters of the wheels, and then
multiplying together the numbers which express the circumferences or
diameters of the several axles. The proportion of the two products
will express the power of the machine. Thus, if the circumferences or
diameters be as the numbers 10, 14, and 15, their product will be 2100;
and if the circumferences or diameters of the axles be expressed by the
numbers 3, 4, and 5, their product will be 60, and the power of the
machine will be expressed by the proportion of 2100 and 60, or 35 to 1.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

(257.) The manner in which the circumferences of the axles act upon
the circumferences of the wheels in compound wheel-work is various.
Sometimes a strap or cord is applied to a groove in the circumference
of the axle, and carried round a similar groove in the circumference
of the succeeding wheel. The friction of this cord or strap with the
groove is sufficient to prevent its sliding and to communicate the
force from the axle to the wheel, or _vice versa_. This method of
connecting wheel-work is represented in _fig. 100._

Numerous examples of wheels and axles driven by straps or cords occur
in machinery applied to almost every department of the arts and
manufactures. In the turning lathe, the wheel worked by the treddle is
connected with the mandrel by a catgut cord passing through grooves
in the wheel and axle. In all great factories, revolving shafts are
carried along the apartments, on which, at certain intervals, straps
are attached passing round their circumferences and carried round
the wheels which give motion to the several machines. If the wheels,
connected by straps or cords, are required to revolve in the same
direction, these cords are arranged as in _fig. 100._; but if they
are required to revolve in contrary directions, they are applied as in
_fig. 101._

One of the chief advantages of the method of transmitting motion
between wheels and axles by straps or cords, is that the wheel and
axle may be placed at any distance from each other which may be found
convenient, and may be made to turn either in the same or contrary
directions.

(258.) When the circumference of the wheel acts immediately on the
circumference of the succeeding axle, some means must necessarily be
adopted to prevent the wheel from moving in contact with the axle
without compelling the latter to turn. If the surfaces of both were
perfectly smooth, so that all friction were removed, it is obvious that
either would slide over the surface of the other, without communicating
motion to it. But, on the other hand, if there were any asperities,
however small, upon these surfaces, they would become mutually inserted
among each other, and neither the wheel nor axle could move without
causing the asperities with which its edge is studded to encounter
those asperities which project from the surface of the other; and
thus, until these projections should be broken off, both wheel and
axle must be moved at the same time. It is on this account that if the
surfaces of the wheels and axles are by any means rendered rough, and
pressed together with sufficient force, the motion of either will turn
the other, provided the load or resistance be not greater than the
force necessary to break off these small projections which produce the
friction.

In cases where great power is not required, motion is communicated in
this way through a train of wheel-work, by rendering the surface of the
wheel and axle rough, either by facing them with buff leather, or with
wood cut across the grain. This method is sometimes used in spinning
machinery, where one large buffed wheel, placed in a horizontal
position, revolves in contact with several small buffed rollers, each
roller communicating motion to a spindle. The position of the wheel W,
and the rollers R R, &c., are represented in _fig. 102._ Each
roller can be thrown out of contact with the wheel, and restored to it
at pleasure.

The communication of motion between wheels and axles by friction has
the advantage of great smoothness and evenness, and of proceeding with
little noise; but this method can only be used in cases where the
resistance is not very considerable, and therefore is seldom adopted in
works on a large scale. Dr. Gregory mentions an instance of a saw mill
at Southampton, where the wheels act upon each other by the contact of
the end grain of wood. The machinery makes very little noise, and wears
very well, having been used not less than 20 years.

(259.) The most usual method of transmitting motion through a train of
wheel-work is by the formation of teeth upon their circumferences, so
that these indentures of each wheel fall between the corresponding ones
of that in which it works, and ensure the action so long as the strain
is not so great as to fracture the tooth.

In the formation of teeth very minute attention must be given to their
figure, in order that the motion may be communicated from wheel to
wheel with smoothness and uniformity. This can only be accomplished
by shaping the teeth according to curves of a peculiar kind, which
mathematicians have invented, and assigned rules for drawing. The ill
consequences of neglecting this will be very apparent, by considering
the nature of the action which would be produced if the teeth were
formed of square projecting pins, as in _fig. 103._ When the
tooth A comes into contact with B, it acts obliquely upon it, and,
as it moves, the corner of B slides upon the plane surface of A in
such a manner as to produce much friction, and to grind away the side
of A and the end of B. As they approach the position C D, they
sustain a jolt the moment their surfaces come into full contact; and
after passing the position of C D, the same scraping and grinding
effect is produced in the opposite direction, until by the revolution
of the wheels the teeth become disengaged. These effects are avoided by
giving to the teeth the curved forms represented in _fig. 104._
By such means the surfaces of the teeth roll upon each other with very
inconsiderable friction, and the direction in which the pressure is
excited is always that of a line M N, touching the two wheels, and
at right angles to the radii. Thus the pressure being always the same,
and acting with the same leverage, produces a uniform effect.

(260.) When wheels work together, their teeth must necessarily be of
the same size, and therefore the proportion of their circumferences may
always be estimated by the number of teeth which they carry. Hence it
follows, that in computing the power of compound wheel-work, the number
of teeth may always be used to express the circumferences respectively,
or the diameters which are proportional to these circumferences. When
teeth are raised upon an axle, it is generally called a _pinion_, and
in that case the teeth are called _leaves_. The rule for computing the
train of wheel-work given in (256.) will be expressed as follows: when
the wheel and axle carry teeth, multiply together the number of teeth
in each of the wheels, and next the number of leaves in each of the
pinions; the proportion of the two products will express the power of
the machine. If some of the wheels and axles carry teeth, and others
not, this computation may be made by using for those circumferences
which do not bear teeth the number of teeth which would fill them.
_Fig. 105._ represents a train of three wheels and pinions. The
wheel F which bears the power, and the axle which bears the weight,
have no teeth; but it is easy to find the number of teeth which they
would carry.

(261.) It is evident that each pinion revolves much more frequently in
a given time than the wheel which it drives. Thus, if the pinion C be
furnished with ten teeth, and the wheel E, which it drives, have sixty
teeth, the pinion C must turn six times, in order to turn the wheel
E once round. The velocities of revolution of every wheel and pinion
which work in one another will therefore have the same proportion as
their number of teeth taken in a reverse order, and by this means the
relative velocity of wheels and pinions may be determined according to
any proposed rate.

Wheel-work, like all other machinery, is used to transmit and modify
force in every department of the arts and manufactures; but it is also
used in cases where motion alone, and not force, is the object to be
attained. The most remarkable example of this occurs in watch and
clock-work, where the object is merely to produce uniform motions of
rotation, having certain proportions, and without any regard to the
elevation of weights, or the overcoming of resistances.

(262.) A _crane_ is an example of combination of wheel-work used for
the purpose of raising or lowering great weights. _Fig. 106._
represents a machine of this kind. A B is a strong vertical beam,
resting on a pivot, and secured in its position by beams in the floor.
It is capable, however, of turning on its axis, being confined between
rollers attached to the beams and fixed in the floor. C D is a
projecting arm called a _gib_, formed of beams which are mortised into
A B. The wheel-work is mounted in two cast-iron crosses, bolted on
each side of the beams, one of which appears at E F G H.
The winch at which the power is applied is at I. This carries a pinion
immediately behind H. This pinion works in a wheel K, which carries
another pinion upon its axle. This last pinion works in a larger wheel
L, which carries upon its axis a barrel M, on which a chain or rope
is coiled. The chain passes over a pulley D at the top of the gib. At
the end of the chain a hook O is attached, to support the weight W.
During the elevation of the weight it is convenient that its recoil
should be hindered in case of any occasional suspension of the power.
This is accomplished by a ratchet wheel attached to the barrel M, as
explained in (253.); but when the weight W is to be lowered, the catch
must be removed from this ratchet wheel. In this case the too rapid
descent of the weight is in some cases checked by pressure excited on
some part of the wheel-work, so as to produce sufficient friction to
retard the descent in any required degree, or even to suspend it, if
necessary. The vertical beam at B resting on a pivot, and being fixed
between rollers, allows the gib to be turned round in any direction; so
that a weight raised from one side of the crane may be carried round,
and deposited on another side, at any distance within the range of the
gib. Thus, if a crane be placed upon a wharf near a vessel, weights may
be raised, and when elevated, the gib may be turned round so as to let
them descend into the hold.

The power of this machine may be computed upon the principles already
explained. The magnitude of the circle, in which the power at I moves,
may be determined by the radius of the winch, and therefore the number
of teeth which a wheel of that size would carry may be found. In
like manner we may determine the number of leaves in a pinion whose
magnitude would be equal to the barrel M. Let the first number be
multiplied by the number of teeth in the wheel K, and that product
by the number of teeth in the wheel L. Next let the number of leaves
in the pinion H be multiplied by the number of leaves in the pinion
attached to the axle of the wheel K, and let that product be multiplied
by the number of leaves in a pinion, whose diameter is equal to that of
the barrel M. These two products will express the power of the machine.

(263.) Toothed wheels are of three kinds, distinguished by the position
which the teeth bear with respect to the axis of the wheel. When they
are raised upon the edge of the wheel as in _fig. 105._, they are
called _spur wheels_, or _spur gear_. When they are raised parallel to
the axis, as in _fig. 107._, it is called a _crown wheel_. When
the teeth are raised on a surface inclined to the plane of the wheel,
as in _fig. 108._, they are called _bevelled wheels_.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

If a motion round one axis is to be communicated to another axis
parallel to it, spur gear is generally used. Thus, in _fig. 105._,
the three axes are parallel to each other. If a motion round one
axis is to be communicated to another at right angles to it, a crown
wheel, working in a spur pinion, as in _fig. 107._, will serve.
Or the same object may be obtained by two bevelled wheels, as in
_fig. 108._

If a motion round one axis is required to be communicated to another
inclined to it at any proposed angle, two bevelled wheels can always be
used. In _fig. 109._ let A B and A C be the two axles;
two bevelled wheels, such as D E and E F, on these axles will
transmit the motion or rotation from one to the other, and the relative
velocity may, as usual, be regulated by the proportional magnitude of
the wheels.

(264.) In order to equalise the wear of the teeth of a wheel and
pinion, which work in one another, it is necessary that every leaf
of the pinion should work in succession through every tooth of the
wheel, and not continually act upon the same set of teeth. If the
teeth could be accurately shaped according to mathematical principles,
and the materials of which they are formed be perfectly uniform, this
precaution would be less necessary; but as slight inequalities, both
of material and form, must necessarily exist, the effects of these
should be as far as possible equalised, by distributing them through
every part of the wheel. For this purpose it is usual, especially
in mill-work, where considerable force is used, so to regulate the
proportion of the number of teeth in the wheel and pinion, that the
same leaf of the pinion shall not be engaged twice with any one tooth
of the wheel, until after the action of a number of teeth, expressed
by the product of the number of teeth in the wheel and pinion. Let us
suppose that the pinion contains ten leaves, which we shall denominate
by the numbers 1, 2, 3, &c., and that the wheel contains 60 teeth
similarly denominated. At the commencement of the motion suppose the
leaf 1 of the pinion engages the tooth 1 of the wheel; then after
one revolution the leaf 1 of the pinion will engage the tooth 11 of
the wheel, and after two revolutions the leaf 1 of the pinion will
engage the tooth 21 of the wheel; and in like manner, after 3, 4, and
5 revolutions of the pinion, the leaf 1 will engage successively the
teeth 31, 41, and 51 of the wheel. After the sixth revolution, the
leaf 1 of the pinion will again engage the tooth 1 of the wheel. Thus
it is evident, that in the case here supposed the leaf 1 of the pinion
will continually be engaged with the teeth 1, 11, 21, 31, 41, and 51
of the wheel, and no others. The like may be said of every leaf of the
pinion. Thus the leaf 2 of the pinion will be successively engaged with
the teeth 2, 12, 22, 32, 42, and 52 of the wheel, and no others. Any
accidental inequalities of these teeth will therefore continually act
upon each other, until the circumference of the wheel be divided into
parts of ten teeth each, unequally worn. This effect would be avoided
by giving either the wheel or pinion one tooth more or one tooth less.
Thus, suppose the wheel, instead of having sixty teeth, had sixty-one,
then after six revolutions of the pinion the leaf 1 of the pinion would
be engaged with the tooth 61 of the wheel; and after one revolution of
the wheel, the leaf 2 of the pinion would be engaged with the tooth 1
of the wheel. Thus, during the first revolution of the wheel the leaf
1 of the pinion would be successively engaged with the teeth 1, 11,
21, 31, 41, 51, and 61 of the wheel: at the commencement of the second
revolution of the wheel the leaf 2 of the pinion would be engaged with
the tooth 1 of the wheel; and during the second revolution of the wheel
the leaf 1 of the pinion would be successively engaged with the teeth
10, 20, 30, 40, 50, and 60 of the wheel. In the same manner it may be
shown, that in the third revolution of the wheel the leaf 1 of the
pinion would be successively engaged with the teeth 9, 19, 29, 39, 49,
and 59 of the wheel: during the fourth revolution of the wheel the
leaf 1 of the pinion would be successively engaged with the teeth 8,
18, 28, 38, 48, and 58 of the wheel. By continuing this reasoning it
will appear, that during the tenth revolution of the wheel the leaf
1 of the pinion will be engaged successively with the teeth 2, 12,
22, 32, 42, and 52 of the wheel. At the commencement of the eleventh
revolution of the wheel the leaf 1 of the pinion will be engaged with
the tooth 1 of the wheel, as at the beginning of the motion. It is
evident, therefore, that during the first ten revolutions of the wheel
each leaf of the pinion has been successively engaged with every tooth
of the wheel, and that during these ten revolutions the pinion has
revolved sixty-one times. Thus the leaves of the pinion have acted six
hundred and ten times upon the teeth of the wheel, before two teeth can
have acted twice upon each other.

The odd tooth which produces this effect is called by millwrights the
_hunting cog_.

(265.) The most familiar case in which wheel-work is used to produce
and regulate motion merely, without any reference to weights to be
raised or resistances to be overcome, is that of chronometers. In watch
and clock work the object is to cause a wheel to revolve with a uniform
velocity, and at a certain rate. The motion of this wheel is indicated
by an index or hand placed upon its axis, and carried round with it.
In proportion to the length of the hand the circle over which its
extremity plays is enlarged, and its motion becomes more perceptible.
This circle is divided, so that very small fractions of a revolution
of the hand may be accurately observed. In most chronometers it is
required to give motion to two hands, and sometimes to three. These
motions proceed at different rates, according to the subdivisions of
time generally adopted. One wheel revolves in a minute, bearing a
hand which plays round a circle divided into sixty equal parts; the
motion of the hand over each part indicating one second, and a complete
revolution of the hand being performed in one minute. Another wheel
revolves once, while the former revolves sixty times; consequently the
hand carried by this wheel revolves once in sixty minutes, or one hour.
The circle on which it plays is, like the former, divided into sixty
equal parts, and the motion of the hand over each division is performed
in one minute. This is generally called the _minute hand_, and the
former the _second hand_.

A third wheel revolves once, while that which carries the minute hand
revolves twelve times; consequently this last wheel, which carries
the _hour hand_, revolves at a rate twelve times less than that of
the minute hand, and therefore seven hundred and twenty times less
than the second hand. We shall now endeavour to explain the manner in
which these motions are produced and regulated. Let A, B, C, D, E,
_fig. 110._, represent a train of wheels, and _a_, _b_, _c_, _d_
represent their pinions, _e_ being a cylinder on the axis of the wheel
E, round which a rope is coiled, sustaining a weight W. Let the effect
of this weight transmitted through the train of wheels be opposed by
a power P acting upon the wheel A, and let this power be supposed
to be of such a nature as to cause the weight W to descend with a
uniform velocity, and at any proposed rate. The wheel E carries on its
circumference eighty-four teeth. The wheel D carries eighty teeth;
the wheel C is also furnished with eighty teeth, and the wheel B with
seventy-five. The pinions _d_ and _c_ are each furnished with twelve
leaves, and the pinions _b_ and _a_ with ten.

If the power at P be so regulated as to allow the wheel A to revolve
once in a minute, with a uniform velocity, a hand attached to the axis
of this wheel will serve as the _second hand_. The pinion _a_ carrying
ten teeth must revolve seven times and a half to produce one revolution
of B, consequently fifteen revolutions of the wheel A will produce two
revolutions of the wheel B; the wheel B, therefore, revolves twice in
fifteen minutes. The pinion _b_ must revolve eight times to produce
one revolution of the wheel C, and therefore the wheel C must revolve
once in four quarters of an hour, or in one hour. If a hand be attached
to the axis of this wheel, it will have the motion necessary for the
minute hand. The pinion _c_ must revolve six times and two thirds to
produce one revolution of the wheel D, and therefore this wheel must
revolve once in six hours and two thirds. The pinion _d_ revolves seven
times for one revolution of the wheel E, and therefore the wheel E will
revolve once in forty-six hours and two thirds.

On the axis of the wheel C a second pinion may be placed, furnished
with seven leaves, which may lead a wheel of eighty-four teeth, so
that this wheel shall turn once during twelve turns of the wheel C. If
a hand be fixed upon the axis, this hand will revolve once for twelve
revolutions of the minute hand fixed upon the axis of the wheel C;
that is, it will revolve once in twelve hours. If it play upon a dial
divided into twelve equal parts, it will move over each part in an
hour, and will serve the purpose of the hour hand of the chronometer.

We have here supposed that the second hand, the minute hand, and the
hour hand move on separate dials. This, however, is not necessary. The
axis of the hour hand is commonly a tube, inclosing within it that of
the minute hand, so that the same dial serves for both. The second
hand, however, is generally furnished with a separate dial.

(266.) We shall now explain the manner in which a power is applied
to the wheel A, so as to regulate and equalise the effect of the
weight W. Suppose the wheel A furnished with thirty teeth, as in
_fig. 111._; if nothing check the motion, the weight W would
descend with an accelerated velocity, and would communicate an
accelerated motion to the wheel A. This effect, however, is interrupted
by the following contrivance:--L M is a pendulum vibrating on the
centre L, and so regulated that the time of its oscillation is one
second. The pallets I and K are connected with the pendulum, so as to
oscillate with it. In the position of the pendulum represented in the
figure, the pallet I stops the motion of the wheel A, and entirely
suspends the action of the weight W, _fig. 110._, so that for
a moment the entire machine is motionless. The weight M, however,
falls by its gravity towards the lowest position, and disengages the
pallet I from the tooth of the wheel. The weight W begins then to take
effect, and the wheel A turns from A towards B. Meanwhile the pendulum
M oscillates to the other side, and the pallet K falls under a tooth
of the wheel A, and checks for a moment its further motion. On the
returning vibration the pallet K becomes again disengaged, and allows
the tooth of the wheel to escape, and by the influence of the weight W
another tooth passes before the motion of the wheel A is again checked
by the interposition of the pallet I.

From this explanation it will appear that, in two vibrations of the
pendulum, one tooth of the wheel A passes the pallet I, and therefore,
if the wheel A be furnished with 30 teeth, it will be allowed to make
one revolution during 60 vibrations of the pendulum. If, therefore, the
pendulum be regulated so as to vibrate seconds, this wheel will revolve
once in a minute. From the action of the pallets in checking the motion
of the wheel A, and allowing its teeth alternately to _escape_, this
has been called the _escapement_ wheel; and the wheel and pallets
together are generally called the _escapement_, or _’scapement_.

We have already explained, that by reason of the friction on the
points of support, and other causes, the swing of the pendulum would
gradually diminish, and its vibration at length cease. This, however,
is prevented by the action of the teeth of the scapement wheel upon the
pallets, which is just sufficient to communicate that quantity of force
to the pendulum which is necessary to counteract the retarding effects,
and to maintain its motion. It thus appears, that although the effect
of the gravity of the weight W in giving motion to the machine is at
intervals suspended, yet this part of the force is not lost, being,
during these intervals, employed in giving to the pendulum all that
motion which it would lose by the resistances to which it is inevitably
exposed.

In stationary clocks, and in other cases in which the bulk of the
machine is not an objection, a descending weight is used as the
moving power. But in watches and portable chronometers, this would be
attended with evident inconvenience. In such cases, a spiral spring,
called the _mainspring_, is the moving power. The manner in which this
spring communicates rotation to an axis, and the ingenious method of
equalising the effect of its variable elasticity by giving to it a
leverage, which increases as the elastic force diminishes, have been
already explained. (255.)

A similar objection lies against the use of a pendulum in portable
chronometers. A spiral spring of a similar kind, but infinitely
more delicate, called a _hair spring_, is substituted in its place.
This spring is connected with a nicely-balanced wheel, called _the
balance wheel_, which plays in pivots. When this wheel is turned to
a certain extent in one direction, the hair spring is coiled up, and
its elasticity causes the wheel to recoil, and return to a position
in which the energy of the spring acts in the opposite direction.
The balance wheel then returns, and continually vibrates in the same
manner. The axis of this wheel is furnished with pallets similar to
those of the pendulum, which are alternately engaged with the teeth of
a crown wheel, which takes the place of the scapement wheel already
described.

A general view of the work of a common watch is represented in
_fig. 111._ _bis._ A is the balance wheel bearing pallets _p_
_p_ upon its axis; C is the crown wheel, whose teeth are suffered to
escape alternately by those pallets in the manner already described
in the scapement of a clock. On the axis of the crown wheel is placed
a pinion _d_, which drives another crown wheel K. On the axis of this
is placed the pinion _c_, which plays in the teeth of the third wheel
L. The pinion _b_ on the axis of L is engaged with the wheel M, called
the centre wheel. The axle of this wheel is carried up through the
centre of the dial. A pinion _a_ is placed upon it, which works in
the great wheel N. On this wheel the mainspring immediately acts.
O P is the mainspring stripped of its barrel. The axis of the
wheel M passing through the centre of the dial is squared at the end
to receive the minute hand. A second pinion Q is placed upon this
axle which drives a wheel T. On the axle of this wheel a pinion _g_
is placed, which drives the hour wheel V. This wheel is placed upon a
tubular axis, which incloses within it the axis of the wheel M. This
tubular axis passing through the centre of the dial, carries the hour
hand. The wheels A, B, C, D, E, _fig. 110._, correspond to the wheels
C, K, L, M, N, _fig. 112._; and the pinions _a_, _b_, _c_, _d_,
_e_, _fig. 109._, correspond to the pinions _d_, _c_, _b_, _a_,
_fig. 111_. From what has already been explained of these wheels,
it will be obvious that the wheel M, _fig. 111._, revolves once
in an hour, causing the minute hand to move round the dial once in
that time. This wheel at the same time turns the pinion Q which leads
the wheel T. This wheel again turns the pinion _g_ which leads the
hour wheel V. The leaves and teeth of these pinions and wheels are
proportioned, as already explained, so that the wheel V revolves once
during twelve revolutions of the wheel M. The hour hand, therefore,
which is carried by the tubular axle of the wheel V, moves once round
the dial in twelve hours.

Our object here has not been to give a detailed account of watch and
clock work, a subject for which we must refer the reader to the proper
department of this work. Such a general account has only been attempted
as may explain how tooth and pinion work may be applied to regulate
motion.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]




CHAP. XV.

OF THE PULLEY.


(267.) The next class of simple machines, which present themselves
to our attention, is that which we have called the _cord_. If a rope
were perfectly flexible, and were capable of being bent over a sharp
edge, and of moving upon it without friction, we should be enabled by
its means to make a force in any one direction overcome resistance, or
communicate motion in any other direction. Thus if P, _fig. 112._,
be such an edge, a perfectly flexible rope passing over it would be
capable of transmitting a force S F to a resistance Q R,
so as to support or overcome R, or by a motion in the direction of
S F to produce another motion in the direction R Q. But as
no materials of which ropes can be constructed can give them perfect
flexibility, and as in proportion to the strength by which they are
enabled to transmit force their rigidity increases, it is necessary,
in practice, to adopt means to remove or mitigate those effects which
attend imperfect flexibility, and which would otherwise render cords
practically inapplicable as machines.

When a cord is used to transmit a force from one direction to another,
its stiffness renders some force necessary in bending it over the
angle P, which the two directions form; and if the angle be sharp,
the exertion of such a force may be attended with the rupture of the
cord. If, instead of bending the rope at one point over a single angle,
the change of direction were produced by successively deflecting it
over several angles, each of which would be less sharp than a single
one could be, the force requisite for the deflection, as well as the
liability of rupturing the cord, would be considerably diminished. But
this end will be still more perfectly attained if the deflection of the
cord be produced by bending it over the surface of a curve.

If a rope were applied only to sustain, and not to move a weight,
this would be sufficient to remove the inconveniences arising from
its rigidity. But when motion is to be produced, the rope, in passing
over the curved surface, would be subject to excessive friction, and
consequently to rapid wear. This inconvenience is removed by causing
the surface on which the rope runs to move with it, so that no more
friction is produced than would arise from the curved surface rolling
upon the rope.

(268.) All these ends are attained by the common pulley, which consists
of a wheel called a _sheave_, fixed in a block and turning on a pivot.
A groove is formed in the edge of the wheel in which the rope runs,
the wheel revolving with it. Such an apparatus is represented in
_fig. 113._

We shall, for the present, omit the consideration of that part of the
effects of the stiffness and friction of the machine which is not
removed by the contrivance just explained, and shall consider the rope
as perfectly flexible and moving without friction.

From the definition of a flexible cord, it follows, that its tension,
or the force by which it is stretched throughout its entire length,
must be uniform. From this principle, and this alone, all the
mechanical properties of pulleys may be derived.

Although, as already explained, the whole mechanical efficacy of this
machine depends on the qualities of the cord, and not on those of the
block and sheave, which are only introduced to remove the accidental
effects of stiffness and friction; yet it has been usual to give the
name pulley to the block and sheave, and a combination of blocks,
sheaves, and ropes is called a _tackle_.

(269.) When the rope passes over a single wheel, which is fixed in
its position, as in _fig. 113._, the machine is called a _fixed
pulley_. Since the tension of the cord is uniform throughout its
length, it follows, that in this machine the power and weight are
equal. For the weight stretches that part of the cord which is between
the weight and pulley, and the power stretches that part between the
power and the pulley. And since the tension throughout the whole length
is the same, the weight must be equal to the power.

Hence it appears that no mechanical advantage is gained by this
machine. Nevertheless, there is scarcely any engine, simple or complex,
attended with more convenience. In the application of power, whether
of men or animals, or arising from natural forces, there are always
some directions in which it may be exerted to much greater convenience
and advantage than others, and in many cases the exertion of these
powers is limited to a single direction. A machine, therefore, which
enables us to give the most advantageous direction to the moving power,
whatever be the direction of the resistance opposed to it, contributes
as much practical convenience as one which enables a small power to
balance or overcome a great weight. In directing the power against the
resistance, it is often necessary to use two fixed pulleys. Thus, in
elevating a weight A, _fig. 114._, to the summit of a building,
by the strength of a horse moving below, two fixed pulleys B and C may
be used. The rope is carried from A over the pulley B; and, passing
downwards, is brought under C, and finally drawn by the animal on
the horizontal plane. In the same manner sails are spread, and flags
hoisted on the yards and masts of a ship, by sailors pulling a rope on
the deck.

By means of the fixed pulley a man may raise himself to a considerable
height, or descend to any proposed depth. If he be placed in a chair
or bucket attached to one end of a rope which is carried over a fixed
pulley, by laying hold of this rope on the other side, as represented
in _fig. 115._, he may, at will, descend to a depth equal to half
of the entire length of the rope, by continually yielding rope on the
one side, and depressing the bucket or chair by his weight on the
other. Fire-escapes have been constructed on this principle, the fixed
pulley being attached to some part of the building.

(270.) A _single moveable pulley_ is represented in _fig. 116._
A cord is carried from a fixed point F, and passing through a block
B, attached to a weight W, passes over a fixed pulley C, the power
being applied at P. We shall first suppose the parts of the cord on
each side the wheel B to be parallel; in this case, the whole weight W
being sustained by the parts of the cords B C and B F, and
these parts being equally stretched (268.), each must sustain half the
weight, which is therefore the tension of the cord. This tension is
resisted by the power at P, which must, therefore, be equal to half the
weight. In this machine, therefore, the weight is twice the power.

(271.) If the parts of the cord B C and B F be not parallel,
as in _fig. 117._, a greater power than half the weight is
therefore necessary to sustain it. To determine the power necessary
to support a given weight, in this case take the line B A in the
vertical direction, consisting of as many inches as the weight consists
of ounces; from A draw A D parallel to B C, and A E
parallel to B F; the force of the weight represented by A B
will be equivalent to two forces represented by B D and B E.
(74.) The number of inches in these lines respectively will represent
the number of ounces which are equivalent to the tensions of the parts
B F and B C of the cord. But as these tensions are equal,
B D and B E must be equal, and each will express the amount
of the power P, which stretches the cord at P C.

It is evident that the four lines, A E, E B, B D, and
D A, are equal. And as each of them represents the power, the
weight which is represented by A B must be less than twice the
power which is represented by A E and E B taken together. It
follows, therefore, that as parts of the ropes which support the weight
depart from parallelism the machine becomes less and less efficacious;
and there are certain obliquities at which the equilibrating power
would be much greater than the weight.

(272.) The mechanical power of pulleys admits of being almost
indefinitely increased by combination. Systems of pulleys may be
divided into two classes; those in which a single rope is used, and
those which consist of several distinct ropes. _Fig. 118._ and
_119._ represent two systems of pulleys, each having a single rope.
The weight is in each case attached to a moveable block, B, in which
are fixed two or more wheels; A is a fixed block, and the rope is
successively passed over the wheels above and below, and, after passing
over the last wheel above, is attached to the power. The tension of
that part of the cord to which the power is attached is produced by
the power, and therefore equivalent to it, and the same tension must
extend throughout its whole length. The weight is sustained by all
those parts of the cord which pass from the lower block, and as the
force which stretches them all is the same, viz. that of the power,
the effect of the weight must be equally distributed among them, their
directions being supposed to be parallel. It will be evident, from
this reasoning, that the weight will be as many times greater than the
power as the number of cords which support the lower block. Thus, if
there be six cords, each cord will support a sixth part of the weight,
that is, the weight will be six times the tension of the cord, or six
times the power. In _fig. 118._ the cord is represented as being
finally attached to a hook on the upper block. But it may be carried
over an additional wheel fixed in that block, and finally attached
to a hook in the lower block, as in _fig. 119._, by which one
will be added to the power of the machine, the number of cords at
the lower block being increased by one. In the system represented in
_fig. 118._ the wheels are placed in the blocks one above the
other; in _fig. 119._ they are placed side by side. In all systems
of pulleys of this class, the weight of the lower block is to be
considered as a part of the weight to be raised, and in estimating the
power of the machine, this should always be attended to.

(273.) When the power of the machine, and therefore the number of
wheels, is considerable, some difficulty arises in the arrangement of
the wheels and cords. The celebrated Smeaton contrived a tackle, which
takes its name from him, in which there are ten wheels in each block:
five large wheels placed side by side, and five smaller ones similarly
placed above them in the lower block, and below them in the upper.
_Fig. 120._ represents Smeaton’s blocks without the rope. The
wheels are marked with the numbers 1, 2, 3, &c., in the order in which
the rope is to be passed over them. As in this pulley 20 distinct parts
of the rope support the lower block, the weight, including the lower
block, will be 20 times the equilibrating power.

(274.) In all these systems of pulleys, every wheel has a separate
axle, and there is a distinct wheel for every turn of the rope at each
block. Each wheel is attended with friction on its axle, and also with
friction between the sheave and block. The machine is by this means
robbed of a great part of its efficacy, since, to overcome the friction
alone, a considerable power is in most cases necessary.

An ingenious contrivance has been suggested, by which all the advantage
of a large number of wheels may be obtained without the multiplied
friction of distinct sheaves and axles. To comprehend the excellence
of this contrivance, it will be necessary to consider the rate at
which the rope passes over the several wheels of such a system, as
_fig. 118._ If one foot of the rope G F pass over the
pulley F, two feet must pass over the pulley E, because the distance
between F and E being shortened one foot, the total length of the rope
G F E must be shortened two feet. These two feet of rope
must pass in the direction E D, and the wheel D, rising one foot,
three feet of rope must consequently pass over it. These three feet of
rope passing in the direction D C, and the rope D C being
also shortened one foot by the ascent of the lower block, four feet of
rope must pass over the wheel C. In the same way it may be shown that
five feet must pass over B, and six feet over A. Thus, whatever be
the number of wheels in the upper and lower blocks, the parts of the
rope which pass in the same time over the wheels in the lower block
are in the proportion of the odd numbers 1, 3, 5, &c.; and those which
pass over the wheels in the upper block in the same time, are as the
even numbers 2, 4, 6, &c. If the wheels were all of equal size, as in
_fig. 119._, they would revolve with velocities proportional to
the rate at which the rope passes over them. So that, while the first
wheel below revolves once, the first wheel above will revolve twice;
the second wheel below three times; the second wheel above, four times,
and so on. If, however, the wheels differed in size in proportion to
the quantity of rope which must pass over them, they would evidently
revolve in the same time. Thus, if the first wheel above were twice the
size of the first wheel below, one revolution would throw off twice the
quantity of rope. Again, if the second wheel below were thrice the size
of the first wheel below, it would throw off in one revolution thrice
the quantity of rope, and so on. Wheels thus proportioned, revolving
in exactly the same time, might be all placed on one axle, and would
partake of one common motion, or, what is to the same effect, several
grooves might be cut upon the face of one solid wheel, with diameters
in the proportion of the odd numbers 1, 3, and 5, &c., for the lower
pulley, and corresponding grooves on the face of another solid wheel
represented by the even numbers 2, 4, 6, &c., for the upper pulley. The
rope being passed successively over the grooves of such wheels, would
be thrown off exactly in the same manner as if every groove were upon a
separate wheel, and every wheel revolved independently of the others.
Such is White’s pulley, represented in _fig. 121._

The advantage of this machine, when accurately constructed, is very
considerable. The friction, even when great resistances are to be
opposed, is very trifling; but, on the other hand, it has corresponding
disadvantages which greatly circumscribe its practical utility. In the
workmanship of the grooves great difficulty is found in giving them
the exact proportions. In doing which, the thickness of the rope must
be accurately allowed for; and consequently it follows, that the same
pulley can never act except with a rope of a particular diameter. A
very slight deviation from the true proportion of the grooves will
cause the rope to be unequally stretched, and will throw on some parts
of it an undue proportion of the weight, while other parts become
nearly, and sometimes altogether slack. Besides these defects, the rope
is so liable to derangement by being thrown out of the grooves, that
the pulley can scarcely be considered portable.

For these and other reasons, this machine, ingenious as it
unquestionably is, has never been extensively used.

(275.) In the several systems of pulleys just explained, the hook to
which the fixed block is attached supports the entire of both the power
and weight. When the machine is in equilibrium, the power only supports
so much of the weight as is equal to the tension of the cord, all the
remainder of the weight being thrown on the fixed point, according to
what was observed in (225.)

If the power be moved so as to raise the weight, it will move with a
velocity as many times greater than that of the weight as the weight
itself is greater than the power. Thus in _fig. 118._ if the
weight attached to the lower block ascend one foot, six feet of line
will pass over the pulley A, according to what has been already proved.
Thus, the power will descend through six feet, while the weight rises
one foot. But, in this case, the weight is six times the power. All the
observations in (226.) will therefore be applicable to the cases of
great weights raised by small powers by means of the system of pulleys
just described.

(276.) When two or more ropes are used, pulleys may be combined in
various ways so as to produce any degree of mechanical effect. If
to any of the systems already described a single moveable pulley
be added, the power of the machine would be doubled. In this case,
the second rope is attached to the hook of the lower block, as in
_fig. 122._, and being carried through a moveable pulley
attached to the weight, it is finally brought up to a fixed point. The
tension of the second cord is equal to half the weight (270.); and
therefore the power P, by means of the first cord, will have only half
the tension which it would have if the weight were attached to the
lower block. A moveable pulley thus applied is called a _runner_.

[Illustration: _C. Varley, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

(277.) Two systems of pulleys, called _Spanish bartons_, having
each two ropes, are represented in _fig. 123._ The tension of
the rope P A B C in the first system is equal to
the power; and therefore the parts B A and B C support a
portion of the weight equal to twice the power. The rope E A
supports the tensions of A P and A B; and therefore the
tension of A E D is twice the power. Thus, the united
tensions of the ropes which support the pulley B is four times the
power, which is therefore the amount of the weight. In the second
system, the rope P A D is stretched by the power. The rope
A E B C acts against the united tensions A P and
A D; and therefore the tension of A E or E B is twice
the power. Thus, the weight acts against three tensions; two of which
are equal to twice the power, and the remaining one is equal to the
power. The weight is therefore equal to five times the power.

A single rope may be so arranged with one moveable pulley as to support
a weight equal to three times the power. In _fig. 124._ this
arrangement is represented, where the numbers sufficiently indicate the
tension of the rope, and the proportion of the weight and power. In
_fig. 125._ another method of producing the same effect with two
ropes is represented.

(278.) If several single moveable pulleys be made successively to act
upon each other, the effect is doubled by every additional pulley:
such a system as this is represented in _fig. 126._ The tension
of the first rope is equal to the power; the second rope acts against
twice the tension of the first, and therefore it is stretched with
a force equal to twice the power: the third rope acts against twice
this tension, and therefore it is stretched with a force equal
to four times the power, and so on. In the system represented in
_fig. 126._ there are three ropes, and the weight is eight times
the power. Another rope would render it sixteen times the power, and so
on.

In this system, it is obvious that the ropes will require to have
different degrees of strength, since the tension to which they are
subject increases in a double proportion from the power to the weight.

(279.) If each of the ropes, instead of being attached to fixed points
at the top, are carried over fixed pulleys, and attached to the several
moveable pulleys respectively, as in _fig. 127._, the power of
the machine will be greatly increased; for in that case the forces
which stretch the successive ropes increase in a treble instead of a
double proportion, as will be evident by attending to the numbers which
express the tensions in the figure. One rope would render the weight
three times the power, two ropes nine times, three ropes twenty-seven
times, and so on. An arrangement of pulleys is represented in _fig.
128._, by which each rope, instead of being finally attached to a fixed
point, as in _fig. 126._, is attached to the weight. The weight
is in this case supported by three ropes; one stretched with a force
equal to the power; another with a force equal to twice the power;
and a third with a force equal to four times the power. The weight is
therefore, in this case, seven times the power.

(280.) If the ropes, instead of being attached to the weight, pass
through wheels, as in _fig. 129._, and are finally attached to the
pulleys above, the power of the machine will be considerably increased.
In the system here represented the weight is twenty-six times the power.

(281.) In considering these several combinations of pulleys, we have
omitted to estimate the effects produced by the weights of the sheaves
and blocks. Without entering into the details of this computation,
it may be observed generally, that in the systems represented in
_figs. 126._, _127._ the weight of the wheel and blocks acts
against the power; but that in _figs. 128._ and _129._ they
assist the powers in supporting the weight. In the systems represented
in _fig. 123._ the weight of the pulleys, to a certain extent,
neutralise each other.

(282.) It will in all cases be found, that that quantity by which the
weight exceeds the power is supported by fixed points; and therefore,
although it be commonly stated that a small power supports a great
weight, yet in the pulley, as in all other machines, the power supports
no more of the weight than is exactly equal to its own amount. It
will not be necessary to establish this in each of the examples which
have been given: having explained it in one instance, the student
will find no difficulty in applying the same reasoning to others. In
_fig. 126._, the fixed pulley sustains a force equal to twice the
power, and by it the power giving tension to the first rope sustains a
part of the weight equal to itself. The first hook sustains a portion
of the weight equal to the tension of the first string, or to the
power. The second hook sustains a force equal to twice the power; and
the third hook sustains a force equal to four times the power. The
three hooks therefore sustain a portion of the weight equal to seven
times the power; and the weight itself being eight times the power, it
is evident that the part of the weight which remains to be supported by
the power is equal to the power itself.

(283.) When a weight is raised by any of the systems of pulleys which
have been last described, the proportion between the velocity of
the weight and the velocity of the power, so frequently noticed in
other machines, will always be observed. In the system of pulleys
represented in _fig. 126._ the weight being eight times the power,
the velocity of the power will be eight times that of the weight. If
the power be moved through eight feet, that part of the rope between
the fixed pulley and the first moveable pulley will be shortened by
eight feet. And since the two parts which lie above the first moveable
pulley must be equally shortened, each will be diminished by four feet;
therefore the first pulley will rise through four feet while the power
moves through eight feet. In the same way it may be shown, that while
the first pulley moves through four feet, the second moves through two;
and while the second moves through two, the third, to which the weight
is attached, is raised through one foot. While the power, therefore, is
carried through eight feet, the weight is moved through one foot.

By reasoning similar to this, it may be shown that the space through
which the power is moved in every case is as many times greater than
the height through which the weight is raised, as the weight is greater
than the power.

(284.) From its portable form, cheapness of construction, and the
facility with which it may be applied in almost every situation,
the pulley is one of the most useful of the simple machines. The
mechanical advantage, however, which it appears in theory to possess
is considerably diminished in practice, owing to the stiffness of the
cordage, and the friction of the wheels and blocks. By this means it
is computed that in most cases so great a proportion as two thirds of
the power is lost. The pulley is much used in building, where weights
are to be elevated to great heights. But its most extensive application
is found in the rigging of ships, where almost every motion is
accomplished by its means.

(285.) In all the examples of pulleys, we have supposed the parts of
the rope sustaining the weight and each of the moveable pulleys to be
parallel to each other. If they be subject to considerable obliquity,
the relative tensions of the different ropes must be estimated
according to the principle applied in (271.)




CHAP. XVI.

ON THE INCLINED PLANE, WEDGE, AND SCREW.


(286.) The inclined plane is the most simple of all machines. It is
a hard plane surface forming some angle with a horizontal plane,
that angle not being a right angle. When a weight is placed on such
a plane, a two-fold effect is produced. A part of the effect of the
weight is resisted by the plane, and produces a pressure upon it; and
the remainder urges the weight down the plane, and would produce a
pressure against any surface resisting its motion placed in a direction
perpendicular to the plane (131.)

Let A B, _fig. 130._, be such a plane, B C its
horizontal base, A C its height, and A B C its angle
of elevation. Let W be a weight placed upon it. This weight acts in
the vertical direction W D, and is equivalent to two forces,
W F perpendicular to the plane, and W E directed down the
plane (74.) If a plane be placed at right angles to the inclined
plane below W, it will resist the descent of the weight, and sustain
a pressure expressed by W E. Thus, the weight W resting in the
corner, instead of producing one pressure in the direction W D,
will produce two pressures, one expressed by W F upon the inclined
plane, and the other expressed by W E upon the resisting plane.
These pressures respectively have the same proportion to the entire
weight as W F and W E have to W D, or as D E and
W E have to W D, because D E is equal to W F. Now
the triangle W E D is in all respects similar to the triangle
A B C, the one differing from the other only in the scale on
which it is constructed. Therefore, the three lines A C, C B,
and B A, are in the same proportion to each other as the lines
W E, E D, and W D. Hence, A B has to A C the
same proportion as the whole weight has to the pressure directed toward
B, and A B has to B C the same proportion as the whole
weight has to the pressure on the inclined plane.

We have here supposed the weight to be sustained upon the inclined
plane by a hard plane fixed at right angles to it. But the power
necessary to sustain the weight will be the same in whatever way it is
applied, provided it act in the direction of the plane. Thus, a cord
may be attached to the weight, and stretched towards A, or the hands of
men may be applied to the weight below it, so as to resist its descent
towards B. But in whatever way it be applied, the amount of the power
will be determined in the same manner. Suppose the weight to consist
of as many pounds as there are inches in A B, then the power
requisite to sustain it upon the plane will consist of as many pounds
as there are inches in A C, and the pressure on the plane will
amount to as many pounds as there are inches in B C.

From what has been stated it may easily be inferred that the less the
elevation of the plane is, the less will be the power requisite to
sustain a given weight upon it, and the greater will be the pressure
upon it. Suppose the inclined plane A B to turn upon a hinge
at B, and to be depressed so that its angle of elevation shall be
diminished, it is evident that as this angle decreases the height of
the plane decreases, and its base increases. Thus, when it takes the
position B A′, the height A′ C′ is less than the former
height A C, while the base B C′ is greater than the former
base B C. The power requisite to support the weight upon the plane
in the position B A′ is represented by A′ C′, and is as much
less than the power requisite to sustain it upon the plane A B,
as the height A′ C′ is less than the height A C. On the
other hand, the pressure upon the plane in the position B A′ is
as much greater than the pressure upon the plane B A, as the base
B C′ is greater than the base B C.

(287.) The power of an inclined plane, considered as a machine, is
therefore estimated by the proportion which its length bears to its
height. This power is always increased by diminishing the elevation of
the plane.

Roads which are not level may be regarded as inclined planes, and
loads drawn upon them in carriages, considered in reference to the
powers which impel them, are subject to all the conditions which have
been established for inclined planes. The inclination of the road is
estimated by the height corresponding to some proposed length. Thus it
is said to rise one foot in fifteen, one foot in twenty, &c., meaning
that if fifteen or twenty feet of the road be taken as the length of
an inclined plane, such as A B, the corresponding height will be
one foot. Or the same may be expressed thus: that if fifteen or twenty
feet be measured upon the road, the difference of the levels of the two
extremities of the distance measured is one foot. According to this
method of estimating the inclination of roads, the power requisite to
sustain a load upon them (setting aside the effect of friction), is
always proportional to that elevation. Thus, if a road rise one foot in
twenty, a power of one ton will be sufficient to sustain twenty tons,
and so on.

On a horizontal plane the only resistance which the power has
to overcome is the friction of the load with the plane, and the
consideration of this being for the present omitted, a weight once put
in motion would continue moving for ever, without any further action of
the power. But if the plane be inclined, the power will be expended in
raising the weight through the perpendicular height of the plane. Thus,
in a road which rises one foot in ten, the power is expended in raising
the weight through one perpendicular foot for every ten feet of the
road over which it is moved. As the expenditure of power depends upon
the rate at which the weight is raised perpendicularly, it is evident
that the greater the inclination of the road is, the slower the motion
must be with the same force. If the energy of the power be such as to
raise the weight at the rate of one foot per minute, the weight may be
moved in each minute through that length of the road which corresponds
to a rise of one foot. Thus, if two roads rise one at the rate of a
foot in fifteen feet, and the other at the rate of one foot in twenty
feet, the same expenditure of power will move the weight through
fifteen feet of the one, and twenty feet of the other at the same rate.

From such considerations as these, it will readily appear that it may
often be more expedient to carry a road through a circuitous route
than to continue it in the most direct course; for though the measured
length of road may be considerably greater than in the former case, yet
more may be gained in speed with the same expenditure of power than is
lost by the increase of distance. By attending to these circumstances,
modern road-makers have greatly facilitated and expedited the
intercourse between distant places.

(288.) If the power act obliquely to the plane, it will have a twofold
effect; a part being expended in supporting or drawing the weight,
and a part in diminishing or increasing the pressure upon the plane.
Let W P, _fig. 130._, be the power. This will be equivalent
to two forces, W F′, perpendicular to the plane, and W E′
in the direction of the plane. (74.) In order that the power should
sustain the weight, it is necessary that that part W E′ of the
power which acts in the direction of the plane should be equal to that
part W E, _fig. 130._, of the weight which acts down the
plane. The other part W F′ of the power acting perpendicular to
the plane is immediately opposed to that part W F of the weight
which produces pressure. The pressure upon the plane will therefore
be diminished by the amount of W F′. The amount of the power
which will equilibrate with the weight may, in this case, be found
as follows. Take W E′ equal to W E, and draw E′ P
perpendicular to the plane, and meeting the direction of the power.
The proportion of the power to the weight will be that of W P to
W D. And the proportion of the pressure to the weight will be that
of the difference between W F and W F′ to W D. If the
amount of the power have a less proportion to the weight than W P
has to W D, it will not support the body on the plane, but will
allow it to descend. And if it have a greater proportion, it will draw
the weight up the plane towards A.

(289.) It sometimes happens that a weight upon one inclined plane is
raised or supported by another weight upon another inclined plane.
Thus, if A B and A B′, _fig. 131._, be two inclined
planes forming an angle at A, and W W′ be two weights placed
upon these planes, and connected by a cord passing over a pulley at
A, the one weight will either sustain the other, or one will descend,
drawing the other up. To determine the circumstances under which these
effects will ensue, draw the lines W D and W′ D′ in the
vertical direction, and take upon them as many inches as there are
ounces in the weights respectively. W D and W′ D′ being the
lengths thus taken, and therefore representing the weights, the lines
W E and W′ E′ will represent the effects of these weights
respectively down the planes. If W E and W′ E′ be equal, the
weights will sustain each other without motion. But if W E be
greater than W′ E′, the weight W will descend, drawing the weight
W′ up. And if W′ E′ be greater than W E, the weight W′ will
descend, drawing the weight W up. In every case the lines W F and
W′ F′ will represent the pressures upon the planes respectively.

It is not necessary, for the effect just described, that the inclined
planes should, as represented in the figure, form an angle with each
other. They may be parallel, or in any other position, the rope being
carried over a sufficient number of wheels placed so as to give it the
necessary deflection. This method of moving loads is frequently applied
in great public works where rail-roads are used. Loaded waggons descend
one inclined plane, while other waggons, either empty or so loaded as
to permit the descent of those with which they are connected, are drawn
up the other.

(290.) In the application of the inclined plane which we have hitherto
noticed, the machine itself is supposed to be fixed in its position,
while the weight or load is moved upon it. But it frequently happens
that resistances are to be overcome which do not admit of being thus
moved. In such cases, instead of moving the load upon the planes,
the plane is to be moved under or against the load. Let D E,
_fig. 132._, be a heavy beam secured in a vertical position
between guides F G and H I, so that it is free to move
upwards and downwards, but not laterally. Let A B C be an
inclined plane, the extremity of which is placed beneath the end of
the beam. A force applied to the back of this plane A C, in the
direction C B, will urge the plane under the beam so as to raise
the beam to the position represented in _fig. 133._ Thus, while
the inclined plane is moved through the distance C B, the beam is
raised through the height C A.

(291.) When the inclined plane is applied in this manner, it is called
a _wedge_. And if the power applied to the back were a continued
pressure, its proportion to the weight would be that of A C to
C B. It follows, therefore, that the more acute the angle B is,
the more powerful will be the wedge.

In some cases, the wedge is formed of two inclined planes, placed base
to base, as represented in _fig. 134._ The theoretical estimation
of the power of this machine is not applicable in practice with any
degree of accuracy. This is in part owing to the enormous proportion
which the friction in most cases bears to the theoretical value of
the power, but still more to the nature of the power generally used.
The force of a blow is of a nature so wholly different from continued
forces, such as the pressure of weights, or the resistance offered by
the cohesion of bodies, that it admits of no numerical comparison with
them. Hence we cannot properly state the proportion which the force
of a blow bears to the amount of a weight or resistance. The wedge is
almost invariably urged by percussion; while the resistances which it
has to overcome are as constantly forces of the other kind. Although,
however, no exact numerical comparison can be made, yet it may be
stated in a general way that the wedge is more and more powerful as its
angle is more acute.

[Illustration: _C. Varley, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

In the arts and manufactures, wedges are used where enormous force
is to be exerted through a very small space. Thus it is resorted to
for splitting masses of timber or stone. Ships are raised in docks
by wedges driven under their keels. The wedge is the principal agent
in the oil-mill. The seeds from which the oil is to be extracted are
introduced into hair bags, and placed between planes of hard wood.
Wedges inserted between the bags are driven by allowing heavy beams to
fall on them. The pressure thus excited is so intense, that the seeds
in the bags are formed into a mass nearly as solid as wood. Instances
have occurred in which the wedge has been used to restore a tottering
edifice to its perpendicular position.

All cutting and piercing instruments, such as knives, razors, scissors,
chisels, &c., nails, pins, needles, awls, &c. are wedges. The angle
of the wedge, in these cases, is more or less acute, according to
the purpose to which it is to be applied. In determining this, two
things are to be considered--the mechanical power, which is increased
by diminishing the angle of the wedge; and the strength of the tool,
which is always diminished by the same cause. There is, therefore,
a practical limit to the increase of the power, and that degree of
sharpness only is to be given to the tool which is consistent with the
strength requisite for the purpose to which it is to be applied. In
tools intended for cutting wood, the angle is generally about 30°. For
iron it is from 50° to 60°; and for brass, from 80° to 90°. Tools which
act by pressure may be made more acute than those which are driven by a
blow; and in general the softer and more yielding the substance to be
divided is, and the less the power required to act upon it, the more
acute the wedge may be constructed.

In many cases the utility of the wedge depends on that which is
entirely omitted in its theory, viz. the friction which arises between
its surface and the substance which it divides. This is the case when
pins, bolts, or nails are used for binding the parts of structures
together; in which case, were it not for the friction, they would
recoil from their places, and fail to produce the desired effect. Even
when the wedge is used as a mechanical engine, the presence of friction
is absolutely indispensable to its practical utility. The power, as
has already been stated, generally acts by successive blows, and is
therefore subject to constant intermission, and but for the friction
the wedge would recoil between the intervals of the blows with as much
force as it had been driven forward. Thus the object of the labour
would be continually frustrated. The friction in this case is of the
same use as a ratchet wheel, but is much more necessary, as the power
applied to the wedge is more liable to intermission than in the cases
where ratchet wheels are generally used.

(292.) When a road directly ascends the side of a hill, it is to be
considered as an inclined plane; but it will not lose its mechanical
character, if, instead of directly ascending towards the top of the
hill, it winds successively round it, and gradually ascends so as after
several revolutions to reach the top. In the same manner a path may be
conceived to surround a pillar by which the ascent may be facilitated
upon the principle of the inclined plane. Winding stairs constructed in
the interior of great columns partake of this character; for although
the ascent be produced by successive steps, yet if a floor could
be made sufficiently rough to prevent the feet from slipping, the
ascent would be accomplished with equal facility. In such a case the
winding path would be equivalent to an inclined plane, bent into such
a form as to accommodate it to the peculiar circumstances in which it
would be required to be used. It will not be difficult to trace the
resemblance between such an adaptation of the inclined plane and the
appearances presented by the thread of a _screw_: and it may hence be
easily understood that a screw is nothing more than an inclined plane
constructed upon the surface of a cylinder.

This will, perhaps, be more apparent by the following contrivance:
Let A B, _fig. 135._, be a common round ruler, and let
C D E be a piece of white paper cut in the form of an
inclined plane, whose height C D is equal to the length of the
ruler A B, and let the edge C E of the paper be marked with
a broad black line: let the edge C D be applied to the ruler
A B, and being attached thereto, let the paper be rolled round
the ruler; the ruler will then present the appearance of a screw,
_fig. 136._ the thread of the screw being marked by the black
line C E, winding continually round the ruler. Let D F,
_fig. 135._, be equal to the circumference of the ruler, and draw
F G parallel to D C, and G H parallel to D E, the
part C G F D of the paper will exactly surround the
ruler once: the part C G will form one convolution of the thread,
and may be considered as the length of one inclined plane surrounding
the cylinder, C H being the corresponding height, and G H
the base. The power of the screw does not, as in the ordinary cases of
the inclined plane, act parallel to the plane or thread, but at right
angles to the length of the cylinder A B, or, what is to the same
effect, parallel to the base H G; therefore the proportion of the
power to the weight will be, according to principles already explained,
the same as that of C H to the space through which the power
moves parallel to H G in one revolution of the screw. H C is
evidently the distance between the successive positions of the thread
as it winds round the cylinder; and it appears from what has been just
stated, that the less this distance is, or, in other words, the finer
the thread is, the more powerful the machine will be.

(293.) In the application of the screw the weight or resistance is
not, as in the inclined plane and wedge, placed upon the surface of
the plane or thread. The power is usually transmitted by causing the
screw to move in a concave cylinder, on the interior surface of which
a spiral cavity is cut, corresponding exactly to the thread of the
screw, and in which the thread will move by turning round the screw
continually in the same direction. This hollow cylinder is usually
called the _nut_ or _concave screw_. The screw surrounded by its
spiral thread is represented in _fig. 137._; and a section of the
same playing in the nut is represented in _fig. 138._

There are several ways in which the effect of the power may be conveyed
to the resistance by this apparatus.

First, let us suppose that the nut A B is fixed. If the screw be
continually turned on its axis, by a lever E F inserted in one
end of it, it will be moved in the direction C D, advancing every
revolution through a space equal to the distance between two contiguous
threads. By turning the lever in an opposite direction, the screw will
be moved in the direction D C.

If the screw be fixed, so as to be incapable either of moving
longitudinally or revolving on its axis, the nut A B may be turned
upon the screw by a lever, and will move on the screw towards C or
towards D, according to the direction in which the lever is turned.

In the former case we have supposed the nut to be absolutely
immoveable, and in the latter case the screw to be absolutely
immoveable. It may happen, however, that the nut, though capable of
revolving, is incapable of moving longitudinally; and that the screw,
though incapable of revolving, is capable of moving longitudinally. In
that case, by turning the nut A B upon the screw by the lever, the
screw will be urged in the direction C D or D C, according to
the way in which the nut is turned.

The apparatus may, on the contrary, be so arranged, that the nut,
though incapable of revolving, is capable of moving longitudinally;
and the screw, though capable of revolving, is incapable of moving
longitudinally. In this case, by turning the screw in the one direction
or in the other, the nut A B will be urged in the direction
C D or D C.

All these various arrangements may be observed in different
applications to the machine.

(294.) A screw may be cut upon a cylinder by placing the cylinder in
a turning lathe, and giving it a rotatory motion upon its axis. The
cutting point is then presented to the cylinder, and moved in the
direction of its length, at such a rate as to be carried through the
distance between the intended thread, while the cylinder revolves
once. The relative motions of the cutting point and the cylinder being
preserved with perfect uniformity, the thread will be cut from one end
to the other. The shape of the threads may be either square, as in
_fig. 137._, or triangular, as in _fig. 139._

(295.) The screw is generally used in cases where severe pressure
is to be excited through small spaces; it is therefore the agent in
most presses. In _fig. 140._, the nut is fixed, and by turning
the lever, which passes through the head of the screw, a pressure is
excited upon any substance placed upon the plate immediately under
the end of the screw. In _fig. 141._, the screw is incapable of
revolving, but is capable of advancing in the direction of its length.
On the other hand, the nut is capable of revolving, but does not
advance in the direction of the screw. When the nut is turned by means
of the screw inserted in it, the screw advances in the direction of its
length, and urges the board which is attached to it upwards, so as to
press any substance placed between it and the fixed board above.

In cases where liquids or juices are to be expressed from solid bodies,
the screw is the agent generally employed. It is also used in coining,
where the impression of a die is to be made upon a piece of metal, and
in the same way in producing the impression of a seal upon wax or other
substance adapted to receive it. When soft and light materials, such
as cotton, are to be reduced to a convenient bulk for transportation,
the screw is used to compress them, and they are thus reduced into hard
dense masses. In printing, the paper is urged by a severe and sudden
pressure upon the types, by means of a screw.

(296.) As the mechanical power of the screw depends upon the relative
magnitude of the circumference through which the power revolves, and
the distance between the threads, it is evident, that, to increase
the efficacy of the machine, we must either increase the length
of the lever by which the power acts, or diminish the magnitude of
the thread. Although there is no limit in theory to the increase of
the mechanical efficacy by these means, yet practical inconvenience
arises which effectually prevents that increase being carried beyond
a certain extent. If the lever by which the power acts be increased,
the same difficulty arises as was already explained in the wheel and
axle (254.); the space through which the power should act would be so
unwieldy, that its application would become impracticable. If, on the
other hand, the power of the machine be increased by diminishing the
size of the thread, the strength of the thread will be so diminished,
that a slight resistance will tear it from the cylinder. The cases
in which it is necessary to increase the power of the machine, being
those in which the greatest resistances are to be overcome, the object
will evidently be defeated, if the means chosen to increase that power
deprive the machine of the strength which is necessary to sustain the
force to which it is to be submitted.

(297.) These inconveniences are removed by a contrivance of Mr. Hunter,
which, while it gives to the machine all the requisite strength and
compactness, allows it to have an almost unlimited degree of mechanical
efficacy.

This contrivance consists in the use of two screws, the threads of
which may have any strength and magnitude, but which have a very small
difference of breadth. While the working point is urged forward by
that which has the greater thread, it is drawn back by that which has
the less; so that during each revolution of the screw, instead of
being advanced through a space equal to the magnitude of either of
the threads, it moves through a space equal to their difference. The
mechanical power of such a machine will be the same as that of a single
screw having a thread, whose magnitude is equal to the difference of
the magnitudes of the two threads just mentioned.

Thus, without inconveniently increasing the sweep of the power, on the
one hand, or, on the other, diminishing the thread until the necessary
strength is lost, the machine will acquire an efficacy limited by
nothing but the smallness of the difference between the two threads.

This principle was first applied in the manner represented in
_fig. 142._ A is the greater thread, playing in the fixed nut; B
is the lesser thread, cut upon a smaller cylinder, and playing in a
concave screw, cut within the greater cylinder. During every revolution
of the screw, the cylinder A descends through a space equal to the
distance between its threads. At the same time the smaller cylinder
B ascends through a space equal to the distance between the threads
cut upon it: the effect is, that the board D descends through a space
equal to the difference between the threads upon A and the threads upon
B, and the machine has a power proportionate to the smallness of this
difference.

Thus, suppose the screw A has twenty threads in an inch, while the
screw B has twenty-one; during one revolution, the screw A will
descend through a space equal to the 20th part of an inch. If, during
this motion, the screw B did not turn within A, the board D would be
advanced through the 20th of an inch; but because the hollow screw
within A turns upon B, the screw B will, relatively to A, be raised in
one revolution through a space equal to the 21st part of an inch. Thus,
while the board D is depressed through the 20th of an inch by the screw
A, it is raised through the 21st of an inch by the screw B. It is,
therefore, on the whole, depressed through a space equal to the excess
of the 20th of an inch above the 21st of an inch, that is, through the
420th of an inch.

The power of this machine will, therefore, be expressed by the number
of times the 420th of an inch is contained in the circumference through
which the power moves.

(298.) In the practical application of this principle at present the
arrangement is somewhat different. The two threads are usually cut
on different parts of the same cylinder. If nuts be supposed to be
placed upon these, which are capable of moving in the direction of
the length, but not of revolving, it is evident that by turning the
screw once round, each nut will be advanced through a space equal to
the breadth of the respective threads. By this means the two nuts
will either approach each other, or mutually recede, according to the
direction in which the screw is turned, through a space equal to the
difference of the breadth of the threads, and they will exert a force
either in compressing or extending any substance placed between them,
proportionate to the smallness of that difference.

(299.) A toothed wheel is sometimes used instead of a nut, so that
the same quality by which the revolution of the screw urges the nut
forward is applied to make the wheel revolve. The screw is in this
case called an endless screw, because its action upon the wheel may be
continued without limit. This application of the screw is represented
in _fig. 143._ P is the winch to which the power is applied; and
its effect at the circumference of the wheel is estimated in the same
manner as the effect of the screw upon the nut. This effect is to be
considered as a power acting upon the circumference of the wheel; and
its proportion to the weight or resistance is to be calculated in the
same manner as the proportion of the power to the weight in the wheel
and axle.

(300.) We have hitherto considered the screw as an engine used to
overcome great resistances. It is also eminently useful in several
departments of experimental science, for the measurement of very
minute motions and spaces, the magnitude of which could scarcely be
ascertained by any other means. The very slow motion which may be
imparted to the end of a screw, by a very considerable motion in the
power, renders it peculiarly well adapted for this purpose. To explain
the manner in which it is applied--suppose a screw to be so cut as
to have fifty threads in an inch, each revolution of the screw will
advance its point through the fiftieth part of an inch. Now, suppose
the head of the screw to be a circle, whose diameter is an inch, the
circumference of the head will be something more than three inches:
this may be easily divided into a hundred equal parts distinctly
visible. If a fixed index be presented to this graduated circumference,
the hundredth part of a revolution of the screw may be observed, by
noting the passage of one division of the head under the index. Since
one entire revolution of the head moves the point through the fiftieth
of an inch, one division will correspond to the five thousandth of an
inch. In order to observe the motion of the point of the screw in this
case, a fine wire is attached to it, which is carried across the field
of view of a powerful microscope, by which the motion is so magnified
as to be distinctly perceptible.

A screw used for such purposes is called a _micrometer screw_. Such an
apparatus is usually attached to the limbs of graduated instruments,
for the purposes of astronomical and other observation. Without the
aid of this apparatus, no observation could be taken with greater
accuracy than the amount of the smallest division upon the limb. Thus,
if an instrument for measuring angles were divided into small arcs of
one minute, and an angle were observed which brought the index of the
instrument to some point between two divisions, we could only conclude
that the observed angle must consist of a certain number of degrees and
minutes, together with an additional number of seconds, which would
be unknown, inasmuch as there would be no means of ascertaining the
fraction of a minute between the index and the adjacent division of
the instrument. But if a screw be provided, the point of which moves
through a space equal to one division of the instrument, with sixty
revolutions of the head, and that the head itself be divided into
one hundred equal parts, each complete revolution of the screw will
correspond to the sixtieth part of a minute, or to one second, and each
division on the head of the screw will correspond to the hundredth part
of a second. The index being attached to this screw, let the head
be turned until the index be moved from its observed position to the
adjacent division of the limb. The number of complete revolutions of
the screw necessary to accomplish this will be the number of seconds;
and the number of parts of a revolution over the complete number of
revolutions will be the hundredth parts of a second necessary to be
added to the degrees and minutes primarily observed.

It is not, however, only to such instruments that the micrometer screw
is applicable; any spaces whatever may be measured by it. An instance
of its mechanical application may be mentioned in a steel-yard,
an instrument for ascertaining the amount of weights by a given
weight, sliding on a long graduated arm of a lever. The distance from
the fulcrum, at which this weight counterpoises the weight to be
ascertained, serves as a measure to the amount of that weight. When the
sliding weight happens to be placed between two divisions of the arm, a
micrometer screw is used to ascertain the fraction of the division.

Hunter’s screw, already described, seems to be well adapted to
micrometrical purposes; since the motion of the point may be rendered
indefinitely slow, without requiring an exquisitely fine thread, such
as in the single screw would be necessary.




CHAP. XVII.

ON THE REGULATION AND ACCUMULATION OF FORCE.


(301.) It is frequently indispensable, and always desirable, that the
operation of a machine should be regular and uniform. Sudden changes
in its velocity, and desultory variations in the effective energy
of its power, are often injurious or destructive to the apparatus
itself, and when applied to manufactures never fail to produce
unevenness in the work. To invent methods for insuring the regular
motion of machinery, by removing those causes of inequality which may
be avoided, and by compensating others, has therefore been a problem to
which much attention and ingenuity have been directed. This is chiefly
accomplished by controlling, and, as it were, measuring out the power
according to the exigencies of the machine, and causing its effective
energy to be always commensurate with the resistance which it has to
overcome.

[Illustration: _C. Varley, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

Irregularity in the motion of machinery may proceed from one or more
of the following causes:--1. irregularity in the prime mover; 2.
occasional variation in the amount of the load or resistance; and, 3.
because, in the various positions which the parts of the machine assume
during its motion, the power may not be transmitted with equal effect
to the working point.

The energy of the prime mover is seldom if ever regular. The force of
water varies with the copiousness of the stream. The power which impels
the windmill is proverbially capricious. The pressure of steam varies
with the intensity of the furnace. Animal power, the result of will,
temper, and health is difficult of control. Human labour is most of
all unmanageable; hence no machine works so irregularly as one which
is manipulated. In some cases the moving force is subject, by the very
conditions of its existence, to constant variation, as in the example
of a spring, which gradually loses its energy as it recoils. (255.) In
many instances the prime mover is liable to regular intermission, and
is actually suspended for certain intervals of time. This is the case
in the single acting steam-engine, where the pressure of the steam
urges the descent of the piston, but is suspended during its ascent.

The load or resistance to which the machine is applied is not less
fluctuating. In mills there are a multiplicity of parts which are
severally liable to be occasionally disengaged, and to have their
operation suspended. In large factories for spinning, weaving,
printing, &c. a great number of separate spinning machines, looms,
presses, or other engines, are usually worked by one common mover, such
as a water-wheel or steam-engine. In these cases the number of machines
employed from time to time necessarily varies with the fluctuating
demand for the articles produced, and from other causes. Under such
circumstances the velocity with which every part of the machinery is
moved would suffer corresponding changes, increasing its rapidity with
every augmentation of the moving power or diminution of the resistance,
or being retarded in its speed by the contrary circumstances.

But even when the prime mover and the resistance are both regular, or
rendered so by proper contrivances, still it will rarely happen that
the machine by which the energy of the one is transmitted to the other
conveys this with unimpaired effect in all the phases of its operation.
To give a general notion of this cause of inequality to those who have
not been familiar with machinery would not be easy, without having
recourse to an example. For the present we shall merely state, that the
several moving parts of every machine assume in succession a variety of
positions; that at regular periods they return to their first position,
and again undergo the same succession of changes. In the different
positions through which they are carried in every period of motion,
the efficacy of the machine to transmit the power to the resistance
is different, and thus the effective energy of the machine in acting
upon the resistance would be subject to continual fluctuation. This
will be more clearly understood when we come to explain the methods of
counteracting the defect or equalising the action of the power upon the
resistance.

Such are the chief causes of the inequalities incidental to the
motion of machinery, and we now propose to describe a few of the many
ingenious contrivances which the skill of engineers has produced to
remove the consequent inconveniences.

(302.) Setting aside, for the present, the last cause of inequality,
and considering the machinery, whatever it be, to transmit the power to
the resistance without irregular interruption, it is evident that every
contrivance, having for its object to render the velocity uniform,
can only accomplish this by causing the variations of the power and
resistance to be proportionate to each other. This may be done either
by increasing or diminishing the power as the resistance increases or
diminishes; or by increasing or diminishing the resistance as the power
increases or diminishes.

According to the facilities or convenience presented by the peculiar
circumstances of the case either of these methods is adopted.

The contrivances for effecting this are called _regulators_. Most
regulators act upon that part of the machine which commands the supply
of the power by means of levers, or some other mechanical contrivance,
so as to check the quantity of the moving principle conveyed to the
machine when the velocity has a tendency to increase; and, on the
other hand, to increase that supply upon any undue abatement of its
speed. In a water-mill this is done by acting upon the shuttle; in a
wind-mill, by an adjustment of the sail-cloth; and in a steam-engine,
by opening or closing, in a greater or less degree, the valve by which
the cylinder is supplied with steam.

(303.) Of all the contrivances for regulating machinery, that which is
best known and most commonly used is the _governor_. This regulator,
which had been long in use in mill-work and other machinery, has of
late years attracted more general notice by its beautiful adaptation
in the steam-engines of Watt. It consists of heavy balls B B,
_fig. 144._, attached to the extremities of rods B F.
These rods play upon a joint at E, passing through a mortise in the
vertical stem D D′. At F they are united by joints to the short
rods F H, which are again connected by joints at H to a ring
which slides upon the vertical shaft D D′. From this description
it will be apparent that when the balls B are drawn from the axis,
their upper arms E F are caused to increase their divergence in
the same manner as the blades of a scissors are opened by separating
the handles. These, acting upon the ring by means of the short links
F H, draw it down the vertical axis from D towards E. A contrary
effect is produced when the balls B are brought closer to the axis, and
the divergence of the rods B E diminished. A horizontal wheel W is
attached to the vertical axis D D′, having a groove to receive a
rope or strap upon its rim. This strap passes round the wheel or axis
by which motion is transmitted to the machinery to be regulated, so
that the spindle or shaft D D′ will always be made to revolve with
a speed proportionate to that of the machinery.

As the shaft D D′ revolves, the balls B are carried round it
with a circular motion, and consequently acquire a centrifugal force
which causes them to recede from the axle, and therefore to depress
the ring H. On the edge or rim of this ring is formed a groove, which
is embraced by the prongs of a fork I, at the extremity of one arm of
a lever whose fulcrum is at G. The extremity K of the other arm is
connected by some means with the part of the machine which supplies
the power. In the present instance we shall suppose it a steam-engine,
in which case the rod K I communicates with a flat circular valve
V, placed in the principal steam-pipe, and so arranged that, when K is
elevated as far as by their divergence the balls B have power over it,
the passage of the pipe will be closed by the valve V, and the passage
of steam entirely stopped; and, on the other hand, when the balls
subside to their lowest position, the valve will be presented with its
edge in the direction of the tube, so as to intercept no part of the
steam.

The property which renders this instrument so admirably adapted to
the purpose to which it is applied is, that when the divergence of
the balls is not very considerable, they must always revolve with the
same velocity, whether they move at a greater or lesser distance from
the vertical axis. If any circumstance increases that velocity, the
balls instantly recede from the axis, and closing the valve V, check
the supply of steam, and thereby diminishing the speed of the motion,
restore the machine to its former rate. If, on the contrary, that
fixed velocity be diminished, the centrifugal force being no longer
sufficient to support the balls, they descend towards the axle, open
the valve V, and, increasing the supply of steam, restore the proper
velocity of the machine.

When the governor is applied to a water-wheel it is made to act upon
the shuttle through which the water flows, and controls its quantity as
effectually, and upon the same principle, as has just been explained in
reference to the steam-engine. When applied to a windmill it regulates
the sail-cloth so as to diminish the efficacy of the power upon the
arms as the force of the wind increases, or _vice versâ_.

In cases where the resistance admits of easy and convenient change, the
governor may act so as to accommodate it to the varying energy of the
power. This is often done in corn-mills, where it acts upon the shuttle
which metes out the corn to the millstones. When the power which drives
the mill increases, a proportionally increased feed of corn is given
to the stones, so that the resistance being varied in the ratio of the
power, the same velocity will be maintained.

(304.) In some cases the centrifugal force of the revolving balls is
not sufficiently great to control the power or the resistance, and
regulators of a different kind must be resorted to. The following
contrivance is called the _water-regulator_:--

A common pump is worked by the machine, whose motion is to be
regulated, and water is thus raised and discharged into a cistern.
It is allowed to flow from this cistern through a pipe of a given
magnitude. When the water is pumped up with the same velocity as it is
discharged by this pipe, it is evident that the level of the water in
the cistern will be stationary, since it receives from the pump the
exact quantity which it discharges from the pipe. But if the pump
throw in more water in a given time than is discharged by the pipe,
the cistern will begin to be filled, and the level of the water will
rise. If, on the other hand, the supply from the pump be less than
the discharge from the pipe, the level of the water in the cistern
will subside. Since the rate at which water is supplied from the
pump will always be proportional to the velocity of the machine, it
follows that every fluctuation in this velocity will be indicated by
the rising or subsiding of the level of the water in the cistern, and
that level never can remain stationary, except at that exact velocity
which supplies the quantity of water discharged by the pipe. This pipe
may be constructed so as by an adjustment to discharge the water at
any required rate; and thus the cistern may be adapted to indicate a
constant velocity of any proposed amount.

If the cistern were constantly watched by an attendant, the velocity of
the machine might be abated by regulating the power when the level of
the water is observed to rise, or increased when it falls; but this is
much more effectually and regularly performed by causing the surface
of the water itself to perform the duty. A float or large hollow metal
ball is placed upon the surface of the water in the cistern. This ball
is connected with a lever acting upon some part of the machinery, which
controls the power or regulates the amount of resistance, as already
explained in the case of the governor. When the level of the water
rises, the buoyancy of the ball causes it to rise also with a force
equal to the difference between its own weight and the weight of as
much water as it displaces. By enlarging the floating ball, a force may
be obtained sufficiently great to move those parts of the machinery
which act upon the power or resistance, and thus either to diminish
the supply of the moving principle or to increase the amount of the
resistance, and thereby retard the motion and reduce the velocity to
its proper limit. When the level of the water in the cistern falls,
the floating ball being no longer supported on the liquid surface,
descends with the force of its own weight, and producing an effect upon
the power or resistance contrary to the former, increases the effective
energy of the one, or diminishes that of the other, until the velocity
proper to the machine be restored.

The sensibility of these regulators is increased by making the surface
of water in the cistern as small as possible; for then a small change
in the rate at which the water is supplied by the pump will produce a
considerable change in the level of the water in the cistern.

Instead of using a float, the cistern itself may be suspended from
the lever which controls the supply of the power, and in this case a
sliding weight may be placed on the other arm, so that it will balance
the cistern when it contains that quantity of water which corresponds
to the fixed level already explained. If the quantity of water in
the cistern be increased by an undue velocity of the machine, the
weight of the cistern will preponderate, draw down the arm of the
lever, and check the supply of the power. If, on the other hand, the
supply of water be too small, the cistern will no longer balance the
counterpoise, the arm by which it is suspended will be raised, and the
energy of the power will be increased.

(305.) In the steam-engine the self-regulating principle is carried
to an astonishing pitch of perfection. The machine itself raises in
due quantity the cold water necessary to condense the steam. It pumps
off the hot water produced by the steam, which has been cooled, and
lodges it in a reservoir for the supply of the boiler. It carries from
this reservoir exactly that quantity of water which is necessary to
supply the wants of the boiler, and lodges it therein according as it
is required. It breathes the boiler of redundant steam, and preserves
that which remains fit, both in quantity and quality, for the use of
the engine. It blows its own fire, maintaining its intensity, and
increasing or diminishing it according to the quantity of steam which
it is necessary to raise; so that when much work is expected from the
engine, the fire is proportionally brisk and vivid. It breaks and
prepares its own fuel, and scatters it upon the bars at proper times
and in due quantity. It opens and closes its several valves at the
proper moments, works its own pumps, turns its own wheels, and is only
not alive. Among so many beautiful examples of the self-regulating
principle, it is difficult to select. We shall, however, mention one or
two, and for others refer the reader to our treatise on this subject.[3]

[3] Lardner on the Steam-Engine, Steam-Navigation, Roads, and Railways.
8th edition. 1851.

It is necessary in this machine that the water in the boiler be
maintained constantly at the same level, and, therefore, that as
much be supplied, from time to time, as is consumed by evaporation.
A pump which is wrought by the engine itself supplies a cistern C,
_fig. 145._, with hot water. At the bottom of this cistern is a
valve V opening into a tube which descends into the boiler. This valve
is connected by a wire with the arm of a lever on the fulcrum D, the
other arm E of which is also connected by a wire with a stone float F,
which is partially immersed in the water of the boiler, and is balanced
by a sliding weight A. The weight A only counterpoises the stone float
F by the aid of its buoyance in the water; for if the water be removed,
the stone F will preponderate, and raise the weight A. When the water
in the boiler is at its proper level, the length of the wire connecting
the valve V with the lever is so adjusted that this valve shall be
closed, the wire at the same time being fully extended. When, by
evaporation, the water in the boiler begins to be diminished, the level
falls, and the stone weight F, being no longer supported, overcomes
the counterpoise A, raises the arm of the lever, and, pulling the
wire, opens the valve V. The water in the cistern C then flows through
the tube into the boiler, and continues to flow until the level be so
raised that the stone weight F is again elevated, the valve V closed,
and the further supply of water from the cistern C suspended.

In order to render the operation of this apparatus easily
intelligible, we have here supposed an imperfection which does not
exist. According to what has just been stated, the level of the water
in the boiler descends from its proper height, and subsequently returns
to it. But, in fact, this does not happen. The float F and valve V
adjust themselves, so that a constant supply of water passes through
the valve, which proceeds exactly at the same rate as that at which the
water in the boiler is consumed.

(306.) In the same machine there occurs a singularly happy example of
self-adjustment, in the method by which the strength of the fire is
regulated. The governor regulates the supply of steam to the engine,
and proportions it to the work to be done. With this work, therefore,
the demands upon the boiler increase or diminish, and with these
demands the production of steam in the boiler ought to vary. In fact,
the rate at which steam is generated in the boiler, ought to be equal
to that at which it is consumed in the engine, otherwise one of two
effects must ensue: either the boiler will fail to supply the engine
with steam, or steam will accumulate in the boiler, being produced in
undue quantity, and, escaping at the safety valve, will thus be wasted.
It is, therefore, necessary to control the agent which generates the
steam, namely, the fire, and to vary its intensity from time to time,
proportioning it to the demands of the engine. To accomplish this,
the following contrivance has been adopted:--Let T, _fig. 146._,
be a tube inserted in the top of the boiler, and descending nearly
to the bottom. The pressure of the steam confined in the boiler,
acting upon the surface of the water, forces it to a certain height
in the tube T. A weight F, half immersed in the water in the tube, is
suspended by a chain, which passes over the wheels P P′, and is
balanced by a metal plate D, in the same manner as the stone float,
_fig. 145._, is balanced by the weight A. The plate D passes
through the mouth of the flue E as it issues finally from the boiler;
so that when the plate D falls it stops the flue, suspending thereby
the draught of air through the furnace, mitigating the intensity of
the fire, and checking the production of steam. If, on the contrary,
the plate D be drawn up, the draught is increased, the fire is rendered
more active, and the production of steam in the boiler is stimulated.
Now, suppose that the boiler produces steam faster than the engine
consumes it, either because the load on the engine has been diminished,
and, therefore, its consumption of steam reduced, or because the
fire has become too intense; the consequence is, that the steam,
beginning to accumulate in the boiler, will press upon the surface of
the water with increased force, and the water will be raised in the
tube T. The weight F will, therefore, be lifted, and the plate D will
descend, diminish, or stop the draught, mitigate the fire, and retard
the production of steam, and will continue to do so until the rate
at which steam is produced shall be commensurate to the wants of the
engine. If, on the other hand, the production of steam be inadequate
to the exigency of the machine, either because of an increased load,
or of the insufficient force of the fire, the steam in the boiler will
lose its elasticity, and the surface of the water not sustaining its
wonted pressure, the water in the tube T will fall; consequently the
weight F will descend, and the plate D will be raised. The flue being
thus opened, the draught will be increased, and the fire rendered
more intense. Thus the production of steam becomes more rapid, and is
rendered sufficiently abundant for the purposes of the engine. This
apparatus is called the _self-acting damper_.

(307.) When a perfectly uniform rate of motion has not been attained,
it is often necessary to indicate small variations of velocity. The
following contrivance, called a _tachometer_[4], has been invented
to accomplish this. A cup, _fig. 147._, is filled to the level
C D with quicksilver, and is attached to a spindle, which is
whirled by the machine in the same manner as the governor already
described. It is well known that the centrifugal force produced by this
whirling motion will cause the mercury to recede from the centre and
rise upon the sides of the cup, so that its surface will assume the
concave appearance represented in _fig. 148._ In this case the
centre of the surface will obviously have fallen below its original
level, _fig. 147._, and the edges will have risen above that
level. As this effect is produced by the velocity of the machine, so
it is proportionate to that velocity, and subject to corresponding
variations. Any method of rendering visible small changes in the
central level of the surface of the quicksilver will indicate minute
variations in the velocity of the machine.

[4] From the Greek words _tachos_ speed, and _metron_ measure.

A glass tube A, open at both ends, and expanding at one extremity into
a bell B, is immersed with its wider end in the mercury, the surface
of which will stand at the same level in the bell B, and in the cup
C D. The tube is so suspended as to be unconnected with the cup.
This tube is then filled to a certain height A, with spirits tinged
with some colouring matter, to render it easily observable. When the
cup is whirled by the machine to which it is attached, the level of
the quicksilver in the bell falls, leaving more space for the spirits,
which, therefore, descends in the tube. As the motion is continued,
every change of velocity causes a corresponding change in the level
of the mercury, and, therefore, also in the level A of the spirits.
It will be observed, that, in consequence of the capacity of the bell
B being much greater than that of the tube A, a very small change in
the level of the quicksilver in the bell will produce a considerable
change in the height of the spirits in the tube. Thus this ingenious
instrument becomes a very delicate indicator of variations in the
motion of machinery.

(308.) The governor, and other methods of regulating the motion of
machinery which have been just described, are adapted principally to
cases in which the proportion of the resistance to the load is subject
to certain fluctuations or gradual changes, or at least to cases in
which the resistance is not at any time entirely withdrawn, nor the
energy of the power actually suspended. Circumstances, however,
frequently occur in which, while the power remains in full activity,
the resistance is at intervals suddenly removed and as suddenly again
returns. On the other hand, cases also present themselves, in which,
while the resistance is continued, the impelling power is subject to
intermission at regular periods. In the former case, the machine would
be driven with a ruinous rapidity during those periods at which it is
relieved from its load, and on the return of the load every part would
suffer a violent strain, from its endeavour to retain the velocity
which it had acquired, and the speedy destruction of the engine could
not fail to ensue. In the latter case, the motion would be greatly
retarded or entirely suspended during those periods at which the moving
power is deprived of its activity, and, consequently, the motion which
it would communicate would be so irregular as to be useless for the
purposes of manufactures.

It is also frequently desirable, by means of a weak but continued
power, to produce a severe but instantaneous effect. Thus a blow may
be required to be given by the muscular action of a man’s arm with a
force to which, unaided by mechanical contrivance, its strength would
be entirely inadequate.

In all these cases, it is evident that the object to be attained is,
an effectual method of accumulating the energy of the power so as
to make it available after the action by which it has been produced
has ceased. Thus, in the case in which the load is at periodical
intervals withdrawn from the machine, if the force of the power could
be imparted to something by which it would be preserved, so as to be
brought against the load when it again returned, the inconvenience
would be removed. In like manner, in the case where the power itself
is subject to intermission, if a part of the force which it exerts in
its intervals of action could be accumulated and preserved, it might
be brought to bear upon the machine during its periods of suspension.
By the same means of accumulating force, the strength of an infant,
by repeated efforts, might produce effects which would be vainly
attempted by the single and momentary action of the strongest man.

(309.) The property of inertia, explained and illustrated in the third
and fourth chapters of this volume furnishes an easy and effectual
method of accomplishing this. A mass of matter retains, by virtue of
its inertia, the whole of any force which may have been given to it,
except that part of which friction and the atmospheric resistance
deprives it. By contrivances which are well known and present no
difficulty, the part of the moving force thus lost may be rendered
comparatively small, and the moving mass may be regarded as retaining
nearly the whole of the force impressed upon it. To render this method
of accumulating force fully intelligible, let us first imagine a
polished level plane on which a heavy globe of metal, also polished, is
placed. It is evident that the globe will remain at rest on any part of
the plane without a tendency to move in any direction. As the friction
is nearly removed by the polish of the surfaces, the globe will be
easily moved by the least force applied to it. Suppose a slight impulse
given to it, which will cause it to move at the rate of one foot in
a second. Setting aside the effects of friction, it will continue to
move at this rate for any length of time. The same impulse repeated
will increase its speed to two feet per second. A third impulse to
three feet, and so on. Thus 10,000 repetitions of the impulse will
cause it to move at the rate of 10,000 feet per second. If the body to
which these impulses were communicated were a cannon ball, it might,
by a constant repetition of the impelling force, be at length made to
move with as much force as if it were projected from the most powerful
piece of ordnance. The force with which the ball in such a case would
strike a building might be sufficient to reduce it to ruins, and yet
such force would be nothing more than the accumulation of a number
of weak efforts not beyond the power of a child to exert, which are
stored up, and preserved, as it were, by the moving mass, and thereby
brought to bear, at the same moment, upon the point to which the force
is directed. It is the sum of a number of actions exerted successively,
and, during a long interval, brought into operation at one and the same
moment.

But the case which is here supposed cannot actually occur; because
we have not usually any practical means of moving a body for any
considerable time in the same direction without much friction, and
without encountering numerous obstacles which would impede its
progress. It is not, however, essential to the effect which is to be
produced, that the motion should be in a straight line. If a leaden
weight be attached to the end of a light rod or cord, and be whirled by
the force of the arm in a circle, it will gradually acquire increased
speed and force, and at length may receive an impetus which would
cause it to penetrate a piece of board as effectually as if it were
discharged from a musket.

The force of a hammer or sledge depends partly on its weight, but much
more on the principle just explained. Were it allowed merely to fall
by the force of its weight upon the head of a nail, or upon a bar of
heated iron which is to be flattened, an inconsiderable effect would be
produced. But when it is wielded by the arm of a man, it receives at
every moment of its motion increased force, which is finally expended
in a single instant on the head of the nail, or on the bar of iron.

The effects of flails in threshing, of clubs, whips, canes, and
instruments for striking, axes, hatchets, cleavers, and all instruments
which cut by a blow, depend on the same principle, and are similarly
explained.

The bow-string which impels the arrow does not produce its effect at
once. It continues to act upon the shaft until it resumes its straight
position, and then the arrow takes flight with the force accumulated
during the continuance of the action of the string, from the moment it
was disengaged from the finger of the bow-man.

Fire-arms themselves act upon a similar principle, as also the air-gun
and steam-gun. In these instruments the ball is placed in a tube, and
suddenly exposed to the pressure of a highly elastic fluid, either
produced by explosion as in fire-arms, by previous condensation as in
the air-gun, or by the evaporation of highly heated liquids as in the
steam-gun. But in every case this pressure continues to act upon it
until it leaves the mouth of the tube, and then it departs with the
whole force communicated to it during its passage along the tube.

(310.) From all these considerations it will easily be perceived that
a mass of inert matter may be regarded as a magazine in which force
may be deposited and accumulated, to be used in any way which may be
necessary. For many reasons, which will be sufficiently obvious, the
form commonly given to the mass of matter used for this purpose in
machinery is that of a wheel, in the rim of which it is principally
collected. Conceive a massive ring of metal, _fig. 149._,
connected with a central box or nave by light spokes, and turning on
an axis with little friction. Such an apparatus is called a fly-wheel.
If any force be applied to it, with that force (making some slight
deduction for friction) it will move, and will continue to move until
some obstacle be opposed to its motion, which will receive from it a
part of the force it has acquired. The uses of this apparatus will be
easily understood by examples of its application.

Suppose that a heavy stamper or hammer is to be raised to a certain
height, and thence to be allowed to fall, and that the power used
for this purpose is a water-wheel. While the stamper ascends, the
power of the wheel is nearly balanced by its weight, and the motion
of the machine is slow. But the moment the stamper is disengaged and
allowed to fall, the power of the wheel, having no resistance, nor any
object on which to expend itself, suddenly accelerates the machine,
which moves with a speed proportioned to the amount of the power,
until it again engages the stamper, when its velocity is as suddenly
checked. Every part suffers a strain, and the machine moves again
slowly until it discharges its load, when it is again accelerated,
and so on. In this case, besides the certainty of injury and wear, and
the probability of fracture from the sudden and frequent changes of
velocity, nearly the whole force exerted by the power in the intervals
between the commencement of each descent of the stamper and the next
ascent is lost. These defects are removed by a fly-wheel. When the
stamper is discharged, the energy of the power is expended in moving
the wheel, which, by reason of its great mass, will not receive an
undue velocity. In the interval between the descent and ascent of the
stamper, the force of the power is lodged in the heavy rim of the
fly-wheel. When the stamper is again taken up by the machine, this
force is brought to bear upon it, combined with the immediate power
of the water-wheel, and the stamper is elevated with nearly the same
velocity as that with which the machine moved in the interval of its
descent.

(311.) In many cases, when the moving power is not subject to
variation, the efficacy of the machine to transmit it to the working
point is subject to continual change. The several parts of every
machine have certain periods of motion, in which they pass through a
variety of positions, to which they continually return after stated
intervals. In these different positions the effect of the power
transmitted to the working point is different; and cases even occur
in which this effect is altogether annihilated, and the machine is
brought into a predicament in which the power loses all influence
over the weight. In such cases the aid of a fly-wheel is effectual
and indispensable. In those phases of the machine, which are most
favourable to the transmission of force, the fly-wheel shares the
effect of the power with the load, and retaining the force thus
received directs it upon the load at the moments when the transmission
of power by the machine is either feeble or altogether suspended. These
general observations will, perhaps, be more clearly apprehended by an
example of an application of the fly-wheel, in a case such as those now
alluded to.

Let A B C D E F, _fig. 150._, be a
_crank_, which is a double winch ((252.) and _fig. 89._), by
which an axle, A B E F, is to be turned. Attached
to the middle of C D by a joint is a rod, which is connected
with a beam, worked with an alternate motion on a centre, like
the brake of a pump, and driven by any constant power, such as a
steam-engine. The bar C D is to be carried with a circular motion
round the axis A E. Let the machine, viewed in the direction
A B E F of the axis, be conceived to be represented
in _fig. 151._, where A represents the centre round which the
motion is to be produced, and G the point where the connecting rod
G H is attached to the arm of the crank. The circle through which
G is to be urged by the rod is represented by the dotted line. In
the position represented in _fig. 151._, the rod acting in the
direction H G has its full power to turn the crank G A round
the centre A. As the crank comes into the position represented in
_fig. 152._, this power is diminished, and when the point G comes
immediately below A, as in _fig. 153._, the force in the direction
H G has no effect in turning the crank round A, but, on the
contrary, is entirely expended in pulling the crank in the direction
A G, and, therefore, only acts upon the pivots or gudgeons which
support the axle. At this crisis of the motion, therefore, the whole
effective energy of the power is annihilated.

After the crank has passed to the position represented in
_fig. 154._, the direction of the force which acts upon the
connecting rod is changed, and now the crank is drawn upward in the
direction G H. In this position the moving force has some efficacy
to produce rotation round A, which efficacy continually increases
until the crank attains the position shown in _fig. 155._, when
its power is greatest. Passing from this position its efficacy is
continually diminished, until the point G comes immediately above the
axis A, _fig. 156._ Here again the power loses all its efficacy
to turn the axle. The force in the direction G H or H G can
obviously produce no other effect than a strain upon the pivots or
gudgeons.

In the critical situations represented in _fig. 153._, and
_fig. 156._, the machine would be incapable of moving, were
the immediate force of the power the only impelling principle. But
having been previously in motion by virtue of the inertia of its
various parts, it has a tendency to continue in motion; and if the
resistance of the load and the effects of friction be not too great,
this disposition to preserve its state of motion will extricate the
machine from the dilemma in which it is involved in the cases just
mentioned, by the peculiar arrangement of its parts. In many cases,
however, the force thus acquired during the phases of the machine, in
which the power is active, is insufficient to carry it through the
dead points (_fig. 153._ and _fig. 156._); and in all cases
the motion would be very unequal, being continually retarded as it
approached these points, and continually accelerated after it passed
them. A fly-wheel attached to the axis A, or to some other part of the
machinery, will effectually remove this defect. When the crank assumes
the positions in _fig. 151._ and _fig. 155._, the power is
in full play upon it, and a share of the effect is imparted to the
massive rim of the fly-wheel. When the crank gets into the predicament
exhibited in _fig. 153._ and _fig. 156._, the momentum which
the fly-wheel received when the crank acted with most advantage,
immediately extricates the machine, and, carrying the crank beyond the
dead point, brings the power again to bear upon it.

The astonishing effects of a fly-wheel, as an accumulator of force,
have led some into the error of supposing that such an apparatus
increases the actual power of a machine. It is hoped, however, that
after what has been explained respecting the inertia of matter and the
true effects of machines, the reader will not be liable to a similar
mistake. On the contrary, as a fly cannot act without friction, and as
the amount of the friction, like that of inertia, is in proportion to
the weight, a portion of the actual moving force must unavoidably be
lost by the use of a fly. In cases, however, where a fly is properly
applied this loss of power is inconsiderable, compared with the
advantageous distribution of what remains.

[Illustration: _C. Varley, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

As an accumulator of force, a fly can never have more force than has
been applied to put it in motion. In this respect it is analogous to
an elastic spring, or the force of condensed air, or any other power
which derives its existence from causes purely mechanical. In bending
a spring a gradual expenditure of power is necessary. On the recoil
this power is exerted in a much shorter time than that consumed in its
production, but its total amount is not altered. Air is condensed by a
succession of manual efforts, one of which alone would be incapable of
projecting a leaden ball with any considerable force, and all of which
could not be immediately applied to the ball at the same instant. But
the reservoir of condensed air is a magazine in which a great number of
such efforts are stored up, so as to be brought at once into action.
If a ball be exposed to their effect, it may be projected with a
destructive force.

In mills for rolling metal the fly-wheel is used in this way. The
water-wheel or other moving power is allowed for some time to act upon
the fly-wheel alone, no load being placed upon the machine. A force
is thus gained which is sufficient to roll a large piece of metal, to
which without such means the mill would be quite inadequate. In the
same manner a force may be gained by the arm of a man acting on a fly
for a few seconds, sufficient to impress an image on a piece of metal
by an instantaneous stroke. The fly is, therefore, the principal agent
in coining presses.

(312.) The power of a fly is often transmitted to the working point
by means of a screw. At the extremities of the cross arm A B,
_fig. 157._, which works the screw, two heavy balls of metal are
placed. When the arm A B is whirled round, those masses of metal
acquire a momentum, by which the screw, being driven downward, urges
the die with an immense force against the substance destined to receive
the impression.

Some engines used in coining have flies with arms four feet long,
bearing one hundred weight at each of their extremities. By turning
such an arm at the rate of one entire circumference in a second, the
die will be driven against the metal with the same force as that with
which 7500 pounds weight would fall from the height of 16 feet; an
enormous power, if the simplicity and compactness of the machine be
considered.

The place to be assigned to a fly-wheel relatively to the other parts
of the machinery is determined by the purpose for which it is used. If
it be intended to equalise the action, it should be near the working
point. Thus, in a steam-engine, it is placed on the crank which turns
the axle by which the power of the engine is transmitted to the object
it is finally designed to affect. On the contrary, in handmills, such
as those commonly used for grinding coffee, &c., it is placed upon the
axis of the winch by which the machine is worked.

The open work of fenders, fire-grates, and similar ornamental articles
constructed in metal, is produced by the action of a fly, in the
manner already described. The cutting tool, shaped according to the
pattern to be executed, is attached to the end of the screw; and the
metal being held in a proper position beneath it, the fly is made to
urge the tool downwards with such force as to stamp out pieces of the
required figure. When the pattern is complicated, and it is necessary
to preserve with exactness the relative situation of its different
parts, a number of punches are impelled together, so as to strike the
entire piece of metal at the same instant, and in this manner the most
elaborate open work is executed by a single stroke.




CHAP. XVIII.

MECHANICAL CONTRIVANCES FOR MODIFYING MOTION.


(313.) The classes of simple machines denominated mechanic powers,
have relation chiefly to the peculiar principle which determines the
action of the power on the weight or resistance. In explaining this
arrangement various other reflections have been incidentally mixed up
with our investigations; yet still much remains to be unfolded before
the student can form a just notion of those means by which the complex
machinery used in the arts and manufactures so effectually attains the
ends, to the accomplishment of which it is directed.

By a power of a given energy to oppose a resistance of a different
energy, or by a moving principle having a given velocity to generate
another velocity of a different amount, is only one of the many objects
to be effected by a machine. In the arts and manufactures the _kind_
of motion produced is generally of greater importance than its _rate_.
The latter may affect the quantity of work done in a given time, but
the former is essential to the performance of the work in any quantity
whatever. In the practical application of machines, the object to be
attained is generally to communicate to the working point some peculiar
sort of motion suitable to the uses for which the machine is intended;
but it rarely happens that the moving power has this sort of motion.
Hence, the machine must be so contrived that, while that part on which
this power acts is capable of moving in obedience to it, its connection
with the other parts shall be such that the working point may receive
that motion which is necessary for the purposes to which the machine is
applied.

To give a perfect solution of this problem it would be necessary to
explain, first, all the varieties of moving powers which are at
our disposal; secondly, all the variety of motions which it may be
necessary to produce; and, thirdly, to show all the methods by which
each variety of prime mover may be made to produce the several species
of motion in the working point. It is obvious that such an enumeration
would be impracticable, and even an approximation to it would be
unsuitable to the present treatise. Nevertheless, so much ingenuity has
been displayed in many of the contrivances for modifying motion, and an
acquaintance with some of them is so essential to a clear comprehension
of the nature and operation of complex machines, that it would be
improper to omit some account of those at least which most frequently
occur in machinery, or which are most conspicuous for elegance and
simplicity.

The varieties of motion which most commonly present themselves in the
practical application of mechanics may be divided into _rectilinear_
and _rotatory_. In rectilinear motion the several parts of the
moving body proceed in parallel straight lines with the same speed.
In rotatory motion the several points revolve round an axis, each
performing a complete circle, or similar parts of a circle, in the same
time.

Each of these may again be resolved into continued and reciprocating.
In a continued motion, whether rectilinear or rotatory, the parts move
constantly in the same direction, whether that be in parallel straight
lines, or in rotation on an axis. In reciprocating motion the several
parts move alternately in opposite directions, tracing the same spaces
from end to end continually. Thus, there are four principal species of
motion which more frequently than any others act upon, or are required
to be transmitted by, machines:--

1. _Continued rectilinear motion._

2. _Reciprocating rectilinear motion._

3. _Continued circular motion._

4. _Reciprocating circular motion._

These will be more clearly understood by examples of each kind.

Continued rectilinear motion is observed in the flowing of a river, in
a fall of water, in the blowing of the wind, in the motion of an animal
upon a straight road, in the perpendicular fall of a heavy body, in the
motion of a body down an inclined plane.

Reciprocating rectilinear motion is seen in the piston of a common
syringe, in the rod of a common pump, in the hammer of a pavier, the
piston of a steam-engine, the stampers of a fulling mill.

Continued circular motion is exhibited in all kinds of wheel-work, and
is so common, that to particularise it is needless.

Reciprocating circular motion is seen in the pendulum of a clock, and
in the balance-wheel of a watch.

We shall now explain some of the contrivances by which a power having
one of these motions may be made to communicate either the same species
of motion changed in its velocity or direction, or any of the other
three kinds of motion.

(314.) By a continued rectilinear motion another continued rectilinear
motion in a different direction may be produced, by one or more fixed
pulleys. A cord passed over these, one end of it being moved by the
power, will transmit the same motion unchanged to the other end. If the
directions of the two motions cross each other, one fixed pulley will
be sufficient; see _fig. 113._, where the hand takes the direction
of the one motion, and the weight that of the other. In this case the
pulley must be placed in the angle at which the directions of the two
motions cross each other. If this angle be distant from the places at
which the objects in motion are situate, an inconvenient length of rope
may be necessary. In this case the same may be effected by the use of
two pulleys, as in _fig. 158._

If the directions of the two motions be parallel, two pulleys must
be used as in _fig. 158._, where P′ A′ is one motion, and
B W the other. In these cases the axles of the two wheels are
parallel.

It may so happen that the directions of the two motions neither cross
each other nor are parallel. This would happen, for example, if the
direction of one were upon the paper in the line P A, while the
other were perpendicular to the paper from the point O. In this case
two pulleys should be used, the axle of one O′ being perpendicular to
the paper, while the axle of the other O should be on the paper. This
will be evident by a little reflection.

In general, the axle of each pulley must be perpendicular to the
two directions in which the rope passes from its groove; and by due
attention to this condition it will be perceived, that a continued
rectilinear motion may be transferred from any one direction to any
other direction, by means of a cord and two pulleys, without changing
its velocity.

If it be necessary to change the velocity, any of the systems of
pulleys described in chap. XV. may be used in addition to the fixed
pulleys.

By the wheel and axle any one continued rectilinear motion may be
made to produce another in any other direction, and with any other
velocity. It has been already explained (250.) that the proportion of
the velocity of the power to that of the weight is as the diameter of
the wheel to the diameter of the axle. The thickness of the axle being
therefore regulated in relation to the size of the wheel, so that
their diameters shall have that proportion which subsists between the
proposed velocities, one condition of the problem will be fulfilled.
The rope coiled upon the axle may be carried, by means of one or more
fixed pulleys, into the direction of one of the proposed motions, while
that which surrounds the wheel is carried into the direction of the
other by similar means.

(315.) By the wheel and axle a continued rectilinear motion may be made
to produce a continued rotatory motion, or _vice versâ_. If the power
be applied by a rope coiled upon the wheel, the continued motion of
the power in a straight line will cause the machine to have a rotatory
motion. Again, if the weight be applied by a rope coiled upon the
axle, a power having a rotatory motion applied to the wheel will cause
the continued ascent of the weight in a straight line.

Continued rectilinear and rotatory motions may be made to produce each
other, by causing a toothed wheel to work in a straight bar, called a
_rack_, carrying teeth upon its edge. Such an apparatus is represented
in _fig. 159._

In some cases the teeth of the wheel work in the links of a chain. The
wheel is then called a _rag-wheel_, _fig. 160._

Straps, bands, or ropes, may communicate rotation to a wheel, by their
friction in a groove upon its edge.

A continued rectilinear motion is produced by a continued circular
motion in the case of a screw. The lever which turns the screw has
a continued circular motion, while the screw itself advances with a
continued rectilinear motion.

The continued rectilinear motion of a stream of water acting upon a
wheel produces continued circular motion in the wheel, _fig. 93_,
_94_, _95_. In like manner the continued rectilinear motion of the wind
produces a continued circular motion in the arms of a windmill.

Cranes for raising and lowering heavy weights convert a circular motion
of the power into a continued rectilinear motion of the weight.

(316.) Continued circular motion may produce reciprocating rectilinear
motion, by a great variety of ingenious contrivances.

Reciprocating rectilinear motion is used when heavy stampers are to
be raised to a certain height, and allowed to fall upon some object
placed beneath them. This may be accomplished by a wheel bearing on
its edge curved teeth, called _wipers_. The stamper is furnished with
a projecting arm or peg, beneath which the wipers are successively
brought by the revolution of the wheel. As the wheel revolves the
wiper raises the stamper, until its extremity passes the extremity of
the projecting arm of the stamper, when the latter immediately falls
by its own weight. It is then taken up by the next wiper, and so the
process is continued.

A similar effect is produced if the wheel be partially furnished with
teeth, and the stamper carry a rack in which these teeth work. Such an
apparatus is represented in _fig. 161._

It is sometimes necessary that the reciprocating rectilinear motion
shall be performed at a certain varying rate in both directions. This
may be accomplished by the machine represented in _fig. 162._
A wheel upon the axle C turns uniformly in the direction
A B D E. A rod _mn_ moves in guides, which only permit
it to ascend and descend perpendicularly. Its extremity _m_ rests
upon a path or groove raised from the face of the wheel, and shaped
into such a curve that as the wheel revolves the rod _mn_ shall be
moved alternately in opposite directions through the guides, with the
required velocity. The manner in which the velocity varies will depend
on the form given to the groove or channel raised upon the face of the
wheel, and this may be shaped so as to give any variation to the motion
of the rod _mn_ which may be required for the purpose to which it is to
be applied.

The _rose-engine_ in the turning-lathe is constructed on this
principle. It is also used in spinning machinery.

It is often necessary that the rod to which reciprocating motion is
communicated shall be urged by the same force in both directions. A
wheel partially furnished with teeth, acting on two racks placed on
different sides of it, and both connected with the bar or rod to which
the reciprocating motion is to be communicated, will accomplish this.
Such an apparatus is represented in _fig. 163._, and needs no
further explanation.

Another contrivance for the same purpose is shown in _fig. 164._,
where A is a wheel turned by a winch H, and connected with a rod or
beam moving in guides by the joint _ab_. As the wheel A is turned
by the winch H the beam is moved between the guides alternately
in opposite directions, the extent of its range being governed by
the length of the diameter of the wheel. Such an apparatus is used
for grinding and polishing plane surfaces, and also occurs in silk
machinery.

An apparatus applied by M. Zureda in a machine for pricking holes in
leather is represented in _fig. 165._ The wheel A B has its
circumference formed into teeth, the shape of which may be varied
according to the circumstances under which it is to be applied. One
extremity of the rod _ab_ rests upon the teeth of the wheel upon which
it is pressed by a spring at the other extremity. When the wheel
revolves, it communicates to this rod a reciprocating rectilinear
motion.

Leupold has applied this mechanism to move the pistons of pumps.[5]
Upon the vertical axis of a horizontal hydraulic wheel is fixed another
horizontal wheel, which is furnished with seven teeth in the manner
of a crown wheel (263.). These teeth are shaped like inclined planes,
the intervals between them being equal to the length of the planes.
Projecting arms attached to the piston rods rest upon the crown of this
wheel; and, as it revolves, the inclined surfaces of the teeth, being
forced under the arm, raise the rod upon the principle of the wedge.
To diminish the obstruction arising from friction, the projecting arms
of the piston rods are provided with rollers, which run upon the teeth
of the wheel. In one revolution of the wheel each piston makes as many
ascents and descents as there are teeth.

[5] Theatrum Machinarum, tom. ii. pl. 36. fig. 3.

(317.) Wheel-work furnishes numerous examples of continued circular
motion round one axis, producing continued circular motion round
another. If the axles be in parallel directions, and not too distant,
rotation may be transmitted from one to the other by two spur-wheels
(263.); and the relative velocities may be determined by giving a
corresponding proportion to the diameter of the wheels.

If a rotary motion is to be communicated from one axis to another
parallel to it, and at any considerable distance, it cannot in
practice be accomplished by wheels alone, for their diameters would
be too large. In this case a strap or chain is carried round the
circumferences of both wheels. If they are intended to turn in the same
direction, the strap is arranged as in _fig. 100._; but if in
contrary directions it is crossed, as in _fig. 101._ In this case,
as with toothed wheels, the relative velocities are determined by the
proportion of the diameters of the wheels.

If the axles be distant and not parallel, the cord, by which the motion
is transmitted, must be passed over grooved wheels, or fixed pulleys,
properly placed between the two axles.

It may happen that the strain upon the wheel, to which the motion is to
be transmitted, is too great to allow of a strap or cord being used. In
this case, a shaft extending from the one axis to another, and carrying
two bevelled wheels (263.), will accomplish the object. One of these
bevelled wheels is placed upon the shaft near to, and in connection
with, the wheel from which the motion is to be taken, and the other at
a part of it near to, and in connection with, that wheel to which the
motion is to be conveyed, _fig. 166._

The methods of transmitting rotation from one axis to another
perpendicular to it, by crown and by bevelled wheels, have been
explained in (263.).

The endless screw (299.) is a machine by which a rotatory motion round
one axis may communicate a rotatory motion round another perpendicular
to it. The power revolves round an axis coinciding with the length of
the screw, and the axis of the wheel driven by the screw is at right
angles to this.

The axis to which rotation is to be given, or from which it is to
be taken, is sometimes variable in its position. In such cases, an
ingenious contrivance, called a _universal joint_, invented by the
celebrated Dr. Hooke, may be used. The two shafts or axles A B,
_fig. 167._, between which the motion is to be communicated,
terminate in semicircles, the diameters of which, C D and
E F, are fixed in the form of a cross, their extremities moving
freely in bushes placed in the extremities of the semicircles.
Thus, while the central cross remains unmoved, the shaft A and its
semicircular end may revolve round C D as an axis; and the shaft
B and its semicircular end may revolve round E F as an axis. If
the shaft A be made to revolve without changing its direction, the
points C D will move in a circle whose centre is at the middle of
the cross. The motion thus given to the cross will cause the points
E F to move in another circle round the same centre, and hence the
shaft B will be made to revolve.

[Illustration: _C. Varley, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

This instrument will not transmit the motion if the angle under the
directions of the shafts be less than 140°. In this case a double
joint, as represented in _fig. 168._, will answer the purpose.
This consists of four semicircles united by two crosses, and its
principle and operation is the same as in the last case.

Universal joints are of great use in adjusting the position of large
telescopes, where, while the observer continues to look through the
tube, it is necessary to turn endless screws or wheels whose axes are
not in an accessible position.

The cross is not indispensably necessary in the universal joint. A
hoop, with four pins projecting from it at four points equally distant
from each other, or dividing the circle of the hoop into four equal
arcs, will answer the purpose. These pins play in the bushes of the
semicircles in the same manner as those of the cross.

The universal joint is much used in cotton-mills, where shafts are
carried to a considerable distance from the prime mover, and great
advantage is gained by dividing them into convenient lengths, connected
by a joint of this kind.

(318.) In the practical application of machinery, it is often necessary
to connect a part having a continued circular motion with another which
has a reciprocating or alternate motion, so that either may move the
other. There are many contrivances by which this may be effected.

One of the most remarkable examples of it is presented in the
scapements of watches and clocks. In this case, however, it can
scarcely be said with strict propriety that it is the rotation of
the scapement-wheel (266.) which _communicates_ the vibration to the
balance-wheel or pendulum. That vibration is produced in the one case
by the peculiar nature of the spiral spring fixed upon the axis of the
balance-wheel, and in the other case by the gravity of the pendulum.
The force of the scapement-wheel only _maintains_ the vibration,
and prevents its decay by friction and atmospheric resistance.
Nevertheless, between the two parts thus moving there exists a
mechanical connection, which is generally brought within the class of
contrivances now under consideration.

A beam vibrating on an axis, and driven by the piston of a
steam-engine, or any other power, may communicate rotary motion to
an axis by a connector and a crank. This apparatus has been already
described in (311.). Every steam-engine which works by a beam affords
an example of this. The working beam is generally placed over the
engine, the piston rod being attached to one end of it, while the
connecting rod unites the other end with the crank. In boat-engines,
however, this position would be inconvenient, requiring more room than
could easily be spared. The piston rod, in these cases, is, therefore,
connected with the end of the beam by long rods, and the beam is placed
beside and below the engine. The use of a fly-wheel here would also
be objectionable. The effect of the dead points explained in (311.)
is avoided without the aid of a fly, by placing two cranks upon the
revolving axle, and working them by two pistons. The cranks are so
placed that when either is at its dead point, the other is in its most
favourable position.

A wheel A, _fig. 169._, armed with wipers, acting upon a
sledge-hammer B, fixed upon a centre or axle C, will, by a continued
rotatory motion, give the hammer the reciprocating motion necessary
for the purposes to which it is applied. The manner in which this acts
must be evident on inspecting the figure.

The treddle of the lathe furnishes an obvious example of a vibrating
circular motion producing a continued circular one. The treddle acts
upon a crank, which gives motion to the principal wheel, in the same
manner as already described in reference to the working beam and crank
in the steam-engine.

By the following ingenious mechanism an alternate or vibrating force
may be made to communicate a circular motion continually in the same
direction. Let A B, _fig. 170._, be an axis receiving an
alternate motion from some force applied to it, such as a swinging
weight. Two ratchet wheels (253.) _m_ and _n_ are fixed on this axle,
their teeth being inclined in opposite directions. Two toothed wheels C
and D are likewise placed upon it, but so arranged that they turn upon
the axle with a little friction. These wheels carry two catches _p_,
_q_, which fall into the teeth of the ratchet wheels _m_, _n_, but fall
on opposite sides conformably to the inclination of the teeth already
mentioned. The effect of these catches is, that if the axis be made
to revolve in one direction, one of the two toothed wheels is always
compelled (by the catch _against_ which the motion is directed) to
revolve with it, while the other is permitted to remain stationary in
obedience to any force sufficiently great to overcome its friction with
the axle on which it is placed. The wheels C and D are both engaged by
bevelled teeth (263.) with the wheel E.

According to this arrangement, in whichever direction the axis
A B is made to revolve, the wheel E will continually turn in
the same direction, and, therefore, if the axle A B be made to
turn alternately in the one direction and the other, the wheel E will
not change the direction of its motion. Let us suppose that the axle
A B is turned against the catch _p_. The wheel C will then be
made to turn with the axle. This will drive the wheel E in the same
direction. The teeth on the opposite side of the wheel E being engaged
with those of the wheel D, the latter will be turned upon the axle,
the friction, which alone resists its motion in that direction, being
overcome. Let the motion of the axle A B be now reversed. Since
the teeth of the ratchet wheel _n_ are moved against the catch _q_, the
wheel D will be compelled to revolve with the axle. The wheel E will be
driven in the same direction as before, and the wheel C will be moved
on the axle A B, and in a contrary direction to the motion of the
axle, the friction being overcome by the force of the wheel E. Thus,
while the axle A B is turned alternately in the one direction and
the other, the wheel E is constantly moved in the same direction.

It is evident that the direction in which the wheel E moves may be
reversed by changing the position of the ratchet wheels and catches.

(319.) It is often necessary to communicate an alternate circular
motion, like that of a pendulum, by means of an alternate motion in
a straight line. A remarkable instance of this occurs in the steam
engine. The moving force in this machine is the pressure of steam,
which impels a piston from end to end alternately in a cylinder. The
force of this piston is communicated to the working beam by a strong
rod, which passes through a collar in one end of the piston. Since it
is necessary that the steam included in the cylinder should not escape
between the piston rod and the collar through which it moves, and yet,
that it should move as freely and be subject to as little resistance as
possible, the rod is turned so as to be truly cylindrical, and is well
polished. It is evident that, under these circumstances, it must not be
subject to any lateral or cross strain, which would bend it towards one
side or the other of the cylinder. But the end of the beam to which it
communicates motion, if connected immediately with the rod by a joint,
would draw it alternately to the one side and the other, since it moves
in the arc of a circle, the centre of which is at the centre of the
beam. It is necessary, therefore, to contrive some method of connecting
the rod and the end of the beam, so that while the one shall ascend
and descend in a straight line, the other may move in the circular arc.

The method which first suggests itself to accomplish this is, to
construct an arch-head upon the end of the beam, as in _fig. 171._
Let C be the centre on which the beam works, and let B D be an
arch attached to the end of the beam, being a part of a circle having C
for its centre. To the highest point B of the arch a chain is attached,
which is carried upon the face of the arch B A, and the other end
of which is attached to the piston rod. Under these circumstances it is
evident, that when the force of the steam impels the piston downwards,
the chain P A B will draw the end of the beam down, and will,
therefore, elevate the other end.

When the steam-engine is used for certain purposes, such as pumping,
this arrangement is sufficient. The piston in that case is not forced
upwards by the pressure of steam. During its ascent it is not subject
to the action of any force of steam, and the other end of the beam
falls by the weight of the pump-rods drawing the piston, at the
opposite end A, to the top of the cylinder. Thus the machine is in fact
passive during the ascent of the piston, and exerts its power only
during the descent.

If the machine, however, be applied to purposes in which a constant
action of the moving force is necessary, as is always the case in
manufactures, the force of the piston must drive the beam in its ascent
as well as in its descent. The arrangement just described cannot effect
this; for although a chain is capable of transmitting any force, by
which its extremities are drawn in opposite directions, yet it is, from
its flexibility, incapable of communicating a force which drives one
extremity of it towards the other. In the one case the piston first
_pulls_ down the beam, and then the beam _pulls_ up the piston. The
chain, because it is inextensible, is perfectly capable of both these
actions; and being flexible, it applies itself to the arch-head of the
beam, so as to maintain the direction of its force upon the piston
continually in the same straight line. But when the piston acts upon
the beam in both ways, in pulling it down and pushing it up, the chain
becomes inefficient, being from its flexibility incapable of the latter
action.

The problem might be solved by extending the length of the piston
rod, so that its extremity shall be above the beam, and using two
chains; one connecting the highest point of the rod with the lowest
point of the arch-head, and the other connecting the highest point
of the arch-head with a point on the rod below the point which
meets the arch-head when the piston is at the top of the cylinder,
_fig. 172._

The connection required may also be made by arming the arch-head with
teeth, _fig. 173._, and causing the piston rod to terminate in a
rack. In cases where, as in the steam-engine, smoothness of motion is
essential, this method is objectionable; and under any circumstances
such an apparatus is liable to rapid wear.

The method contrived by Watt, for connecting the motion of the piston
with that of the beam, is one of the most ingenious and elegant
solutions ever proposed for a mechanical problem. He conceived the
motion of two straight rods A B, C D, _fig. 174._,
moving on centres or pivots A and C, so that the extremities B and D
would move in the arcs of circles having their centres at A and C. The
extremities B and D of these rods he conceived to be connected with a
third rod B D united with them by pivots on which it could turn
freely. To the system of rods thus connected let an alternate motion
on the centres A and C be communicated: the points B and D will move
upwards and downwards in the arcs expressed by the dotted lines, but
the middle point P of the connecting rod B D will move upwards and
downwards without any sensible deviation from a straight line.

To prove this demonstratively would require some abstruse mathematical
investigation. It may, however, be rendered in some degree apparent
by reasoning of a looser and more popular nature. As the point B is
raised to E, it is also drawn aside towards the right. At the same
time the other extremity D of the rod B D is raised to E′, and
is drawn aside towards the left. The ends of the rod B D being
thus at the same time drawn equally towards opposite sides, its middle
point P will suffer no lateral derangement, and will move directly
upwards. On the other hand, if B be moved downwards to F, it will be
drawn laterally to the right, while D being moved to F′ will be drawn
to the left. Hence, as before, the middle point P sustains no lateral
derangement, but merely descends. Thus, as the extremities B and D move
upwards and downwards in circles, the middle point P moves upwards and
downwards in a straight line.[6]

[6] In a strictly mathematical sense, the path of the point P is a
curve, and not a straight line; but in the play given to it in its
application to the steam-engine, it moves through a part only of its
entire locus, and this part extending equally on each side of a point
of inflection, the radius of curvature is infinite, so that in practice
the deviation from a straight line, when proper proportions are
observed in the rods, is imperceptible.

The application of this geometrical principle in the steam-engine
evinces much ingenuity. The same arm of the beam usually works two
pistons, that of the cylinder and that of the _air-pump_. The apparatus
is represented on the arm of the beam in _fig. 175._ The beam
moves alternately upwards and downwards on its axis A. Every point of
it, therefore, describes a part of a circle of which A is the centre.
Let B be the point which divides the arm A G into two equal parts
A B and B G; and let C D be a straight rod, equal in
length to G B, and fixed on a centre or pivot C on which it is at
liberty to play. The end D of this rod is connected by a straight bar
with the point B, by pivots on which the rod B D turns freely. If
the beam be now supposed to rise and fall alternately, the points B and
D will move upwards and downwards in circular arcs, and, as already
explained with respect to the points B D, _fig. 174._, the
middle point P of the connecting rod B D will move upwards and
downwards without lateral deflection. To this point one of the piston
rods which are to be worked is attached.

To comprehend the method of working the other piston, conceive a rod
G P′, equal in length to B D, to be attached to the end G of
the beam by a pivot on which it moves freely; and let its extremity
P′ be connected with D by another rod P′ D, equal in length to
G B, and playing on points at P′ and D. The piston rod of the
cylinder is attached to the point P′, and this point has a motion
precisely similar to that of P, without any lateral derangement, but
with a range in the perpendicular direction twice as great. This will
be apparent by conceiving a straight line drawn from the centre A
of the beam to P′, which will also pass through P. Since G P′
is always parallel to B P, it is evident that the triangle
P′ G A is always similar to P B A, and has its
sides and angles similarly placed, but those sides are each twice the
magnitude of the corresponding sides of the other triangle. Hence
the point P′ must be subject to the same changes of position as the
point P, with this difference only, that in the same time it moves
over a space of twice the magnitude. In fact, the line traced by P′
is the same as that traced by P, but on a scale twice as large. This
contrivance is usually called the _parallel motion_, but the same name
is generally applied to all contrivances by which a circular motion is
made to produce a rectilinear one.




CHAP. XIX.

OF FRICTION AND THE RIGIDITY OF CORDAGE.


(320.) With a view to the simplification of the elementary theory of
machines, the consideration of several mechanical effects of great
practical importance has been postponed, and the attention of the
student has been directed exclusively to the way in which the moving
power is modified in being transmitted to the resistance independently
of such effects. A machine has been regarded as an instrument by
which a moving principle, inapplicable in its existing state to the
purpose for which it is required, may be changed either in its velocity
or direction, or in some other character, so as to be adapted to that
purpose. But in accomplishing this, the several parts of the machine
have been considered as possessing in a perfect degree qualities which
they enjoy only in an imperfect degree; and accordingly the conclusions
to which by such reasoning we are conducted are infected with errors,
the amount of which will depend on the degree in which the machinery
falls short of perfection in those qualities which theoretically are
imputed to it.

[Illustration: _C. Varley, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

Of the several parts of a machine, some are designed to move, while
others are fixed; and of those which move, some have motions differing
in quantity and direction from those of others. The several parts,
whether fixed or movable, are subject to various strains and pressures,
which they are intended to resist. These forces not only vary according
to the load which the machine has to overcome, but also according to
the peculiar form and structure of the machine itself. During the
operation the surfaces of the movable parts move in immediate contact
with the surfaces either of fixed parts or of parts having other
motions. If these surfaces were endued with perfect smoothness or
polish, and the several parts subject to strains possessed perfect
inflexibility and infinite strength, then the effects of machinery
might be practically investigated by the principles already explained.
But the materials of which every machine is formed are endued with
limited strength, and therefore the load which is placed upon it must
be restricted accordingly, else it will be liable to be distorted by
the flexure, or even to be destroyed by the fracture of those parts
which are submitted to an undue strain. The surfaces of the movable
parts, and those surfaces with which they move in contact, cannot in
practice be rendered so smooth but that such roughness and inequality
will remain as sensibly to impede the motion. To overcome such an
impediment requires no inconsiderable part of the moving power. This
part is, therefore, intercepted before its arrival at the working
point, and the resistance to be finally overcome is deprived of it. The
property thus depending on the imperfect smoothness of surfaces, and
impeding the motion of bodies whose surfaces are in immediate contact,
is called _friction_. Before we can form a just estimate of the effects
of machinery, it is necessary to determine the force lost by this
impediment, and the laws which under different circumstances regulate
that loss.

When cordage is engaged in the formation of any part of a machine, it
has hitherto been considered as possessing perfect flexibility. This is
not the case in practice; and the want of perfect flexibility, which
is called _rigidity_, renders a certain quantity of force necessary
to bend a cord or rope over the surface of an axle or the groove of
a wheel. During the motion of the rope a different part of it must
thus be continually bent, and the force which is expended in producing
the necessary flexure must be derived from the moving power, and is
thus intercepted on its way to the working point. In calculating the
effects of cordage, due regard must be had to this waste of power;
and therefore it is necessary to enquire into the laws which govern
the flexure of imperfectly flexible ropes, and the way in which these
affect the machines in which ropes are commonly used.

To complete, therefore, the elementary theory of machinery, we propose
in the present and following chapter to explain the principal laws
which determine the effects of friction, the rigidity of cordage, and
the strength of materials.

(321.) If a horizontal plane surface were perfectly smooth, and free
from the smallest inequalities, and a body having a flat surface also
perfectly smooth were placed upon it, any force applied to the latter
would put it in motion, and that motion would continue undiminished
as long as the body would remain upon the smooth horizontal surface.
But if this surface, instead of being every where perfectly even, had
in particular places small projecting eminences, a certain quantity
of force would be necessary to carry the moving body over these, and
a proportional diminution in its rate of motion would ensue. Thus, if
such eminences were of frequent occurrence, each would deprive the
body of a part of its speed, so that between that and the next it
would move with a less velocity than it had between the same and the
preceding one. This decrease being continued by a sufficient number of
such eminences encountering the body in succession, the velocity would
at last be so much diminished that the body would not have sufficient
force to carry it over the next eminence, and its motion would thus
altogether cease.

Now, instead of the eminences being at a considerable distance asunder,
suppose them to be contiguous, and to be spread in every direction
over the horizontal plane, and also suppose corresponding eminences to
be upon the surface of the moving body; these projections incessantly
encountering one another will continually obstruct the motion of the
body, and will gradually diminish its velocity, until it be reduced to
a state of rest.

Such is the cause of friction. The amount of this resisting force
increases with the magnitude of these asperities, or with the roughness
of the surfaces; but it does not solely depend on this. The surfaces
remaining the same, a little reflection on the method of illustration
just adopted, will show that the amount of friction ought also to
depend upon the force with which the surfaces moving one upon the
other are pressed together. It is evident, that as the weight of
the body supposed to move upon the horizontal plane is increased, a
proportionally greater force will be necessary to carry it over the
obstacles which it encounters, and therefore it will the more speedily
be deprived of its velocity and reduced to a state of rest.

(322.) Thus we might predict with probability, that which accurate
experimental enquiry proves to be true, that the resistance from
friction depends conjointly on the roughness of the surfaces and the
force of the pressure. When the surfaces are the same, a double
pressure will produce a double amount of friction, a treble pressure a
treble amount of friction, and so on.

Experiment also, however, gives a result which, at least at first view,
might not have been anticipated from the mode of illustration we have
adopted. It is found that the resistance arising from friction does not
at all depend on the magnitude of the surface of contact; but provided
the nature of the surfaces and the amount of pressure remain the same,
this resistance will be equal, whether the surfaces which move one upon
the other be great or small. Thus, if the moving body be a flat block
of wood, the face of which is equal to a square foot in magnitude, and
the edge of which does not exceed a square inch, it will be subject to
the same amount of friction, whether it move upon its broad face or
upon its narrow edge. If we consider the effect of the pressure in each
case, we shall be able to perceive why this must be the case. Let us
suppose the weight of the block to be 144 ounces. When it rests upon
its face, a pressure to this amount acts upon a surface of 144 square
inches, so that a pressure of one ounce acts upon each square inch. The
total resistance arising from friction will, therefore, be 144 times
that resistance which would be produced by a surface of one square inch
under a pressure of one ounce. Now, suppose the block placed upon its
edge, there is then a pressure of 144 ounces upon a surface equal to
one square inch. But it has been already shown, that when the surface
is the same, the friction must increase in proportion to the pressure.
Hence we infer that the friction produced in the present case is 144
times the friction which would be produced by a pressure of one ounce
acting on one square inch of surface, which is the same resistance as
that which the body was proved to be subject to when resting on its
face.

These two laws, that friction is independent of the magnitude of the
surface, and is proportional to the pressure when the quality of the
surfaces is the same, are useful in practice, and _generally_ true. In
very extreme cases they are, however, in error. When the pressure is
very intense, in proportion to the surface, the friction is somewhat
_less_ than it would be by these laws; and when it is very small in
proportion to the surface, it is somewhat _greater_.

(323.) There are two methods of establishing by experiment the laws of
friction, which have been just explained.

First. The surfaces between which the friction is to be determined
being rendered perfectly flat, let one be fixed in the horizontal
position on a table T T′, _fig. 176._; and let the other be
attached to the bottom of a box B C, adapted to receive weights,
so as to vary the pressure. Let a silken cord S P, attached to the
box, be carried parallel to the table over a wheel at P, and let a dish
D be suspended from it. If no friction existed between the surfaces,
the smallest weight appended to the cord would draw the box towards
P with a continually increasing speed. But the friction which always
exists interrupts this effect, and a small weight may act upon the
string without moving the box at all. Let weights be put in the dish D,
until a sufficient force is obtained to overcome the friction without
giving the box an accelerated motion. Such a weight is equivalent to
the amount of the friction.

The amount of the weight of the box being previously ascertained, let
this weight be now doubled by placing additional weights in the box.
The pressure will thus be doubled, and it will be found that the weight
of the dish D and its load, which before was able to overcome the
friction, is now altogether inadequate to it. Let additional weights
be placed in the dish until the friction be counteracted as before,
and it will be observed, that the whole weight necessary to produce
this effect is exactly twice the weight which produced it in the former
case. Thus it appears that a double amount of pressure produces a
double amount of friction; and in a similar way it may be proved, that
any proposed increase or decrease of the pressure will be attended with
a proportionate variation in the amount of the friction.

Second. Let one of the surfaces be attached to a flat plane A B,
_fig. 177._, which can be placed at any inclination with an
horizontal plane B C, the other surface being, as before, attached
to the box adapted to receive weights. The box being placed upon the
plane, let the latter be slightly elevated. The tendency of the box
to descend upon A B, will bear the same proportion to its entire
weight as the perpendicular A E bears to the length of the plane
A B (286.). Thus if the length A B be 36 inches, and the
height A E be three inches, that is a twelfth part of the length,
then the tendency of the weight to move down the plane is equal to a
twelfth part of its whole amount. If the weight were twelve ounces, and
the surfaces perfectly smooth, a force of one ounce acting up the plane
would be necessary to prevent the descent of the weight.

In this case also the pressure on the plane will be represented by
the length of the base B E (286.), that is, it will bear the
same proportion to the whole weight as B E bears to B A.
The relative amounts of the weight, the tendency to descend, and the
pressure, will always be exhibited by the relative lengths of A B,
A E, and B E.

This being premised, let the elevation of the plane A B be
gradually increased until the tendency of the weight to descend just
overcomes the friction, but not so much as to allow the box to descend
with accelerated speed. The proportion of the whole weight, which then
acts down the plane, will be found by measuring the height A E,
and the pressure will be determined by measuring the base B E. Now
let the weight in the box be increased, and it will be found that the
same elevation is necessary to overcome the friction; nor will this
elevation suffer any change, however the pressure or the magnitude of
the surfaces which move in contact may be varied.

Since, therefore, in all these cases, the height A E and the base
B E remain the same, it follows that the proportion between the
friction and pressure is undisturbed.

(324.) The law that friction is proportional to the pressure, has been
questioned by the late professor Vince of Cambridge, who deduced from
a series of experiments, that although the friction increases with the
pressure, yet that it increases in a somewhat less ratio; and from
this it would follow, that the variation of the surface of contact
must produce some effect upon the amount of friction. The law, as we
have explained it, however, is sufficiently near the truth for most
practical purposes.

(325.) There are several circumstances regarding the quality of the
surfaces which produce important effects on the quantity of friction,
and which ought to be noticed here.

This resistance is different in the surfaces of different substances.
When the surfaces are those of wood newly planed, it amounts to about
half the pressure, but is different in different kinds of wood. The
friction of metallic surfaces is about one fourth of the pressure.

In general the friction between the surfaces of bodies of different
kinds is less than between those of the same kind. Thus, between wood
and metal the friction is about one fifth of the pressure.

It is evident that the smoother the surfaces are the less will be the
friction. On this account, the friction of surfaces, when first brought
into contact, is often greater than after their attrition has been
continued for a certain time, because that process has a tendency to
remove and rub off those minute asperities and projections on which the
friction depends. But this has a limit, and after a certain quantity
of attrition the friction ceases to decrease. Newly planed surfaces
of wood have at first a degree of friction which is equal to half the
entire pressure, but after they are worn by attrition it is reduced to
a third.

If the surfaces in contact be placed with their grains in the same
direction, the friction will be greater than if the grains cross each
other.

Smearing the surfaces with unctuous matter diminishes the friction,
probably by filling the cavities between the minute projections which
produce the friction.

When the surfaces are first placed in contact, the friction is less
than when they are suffered to rest so for some time; this is proved
by observing the force which in each case is necessary to move the one
upon the other, that force being less if applied at the first moment
of contact than when the contact has continued. This, however, has a
limit. There is a certain time, different in different substances,
within which this resistance attains its greatest amount. In surfaces
of wood this takes place in about two minutes; in metals the time
is imperceptibly short; and when a surface of wood is placed upon a
surface of metal, it continues to increase for several days. The limit
is larger when the surfaces are great, and belong to substances of
different kinds.

The velocity with which the surfaces move upon one another produces but
little effect upon the friction.

(326.) There are several ways in which bodies may move one upon the
other, in which friction will produce different effects. The principal
of these are, first, the case where one body _slides_ over another; the
second, where a body having a round form _rolls_ upon another; and,
_thirdly_, where an axis revolves within a hollow cylinder, or the
hollow cylinder revolves upon the axis.

With the same amount of pressure and a like quality of surface, the
quantity of friction is greatest in the first case and least in the
second. The friction in the second case also depends on the diameter
of the body which rolls, and is small in proportion as that diameter
is great. Thus a carriage with large wheels is less impeded by the
friction of the road than one with small wheels.

In the third case, the leverage of the wheel aids the power in
overcoming the friction. Let _fig. 178._ represent a section of
the wheel and axle; let C be the centre of the axle, and let B E
be the hollow cylinder in the nave of the wheel in which the axle is
inserted. If B be the part on which the axle presses, and the wheel
turn in the direction N D M, the friction will act at B in
the direction B F, and with the leverage B C. The power acts
against this at D in the direction D A, and with the leverage
D C. It is therefore evident, that as D C is greater than
B C, in the same proportion does the power act with mechanical
advantage on the friction.

(327.) Contrivances for diminishing the effects of friction depend on
the properties just explained, the motion of rolling being as much
as possible substituted for that of sliding; and where the motion of
rolling cannot be applied, that of a wheel upon its axle is used. In
some cases both these motions are combined.

If a heavy load be drawn upon a plane in the manner of a sledge, the
motion will be that of sliding, the species which is attended with
the greatest quantity of friction; but if the load be placed upon
cylindrical rollers, the nature of the motion is changed, and becomes
that in which there is the least quantity of friction. Thus large
blocks of stone, or heavy beams of timber, which would require an
enormous power to move them on a level road, are easily advanced when
rollers are put under them.

When very heavy weights are to be moved through small spaces, this
method is used with advantage; but when loads ore to be transported to
considerable distances, the process is inconvenient and slow, owing to
the necessity of continually replacing the rollers in front of the load
as they are left behind by its progressive advancement.

The wheels of carriages may be regarded as rollers which are
continually carried forward with the load. In addition to the friction
of the rolling motion on the road, they have, it is true, the friction
of the axle in the nave; but, on the other hand, they are free from
the friction of the rollers with the under surface of the load, or
the carriage in which the load is transported. The advantages of
wheel carriages in diminishing the effects of friction is sometimes
attributed to the slowness with which that axle moves within the box,
compared with the rate at which the wheel moves over the road; but
this is erroneous. The quantity of friction does not in any case vary
considerably with the velocity of the motion, but least of all does it
in that particular kind of motion here considered.

In certain cases, where it is of great importance to remove the
effects of friction, a contrivance called _friction-wheels_, or
friction-rollers, is used. The axle of a friction-wheel, instead of
revolving within a hollow cylinder, which is fixed, rests upon the
edges of wheels which revolve with it; the species of motion thus
becomes that in which the friction is of least amount.

Let A B and D C, _fig. 179._, be two wheels revolving
on pivots P Q with as little friction as possible, and so placed
that the axle O of a third wheel E F may rest between their edges.
As the wheel E F revolves, the axle O, instead of grinding its
surface on the surface on which it presses, carries that surface with
it, causing the wheels A B, C D, to revolve.

In wheel carriages, the roughness of the road is more easily overcome
by large wheels than by small ones. The cause of this arises partly
from the large wheels not being so liable to sink into holes as small
ones, but more because, in surmounting obstacles, the load is elevated
less abruptly. This will be easily understood by observing the curves
in _fig. 180._, which represent the elevation of the axle in each
case.

(328.) If a carriage were capable of moving on a road without friction,
the most advantageous direction in which a force could be applied to
draw it would be parallel to the road. When the motion is impeded by
friction, it is better, however, that the line of draught should be
inclined to the road, so that the drawing force may be expended partly
in lessening the pressure on the road, and partly in advancing the load.

Let W, _fig. 181._, be a load which is to be moved upon the plane
surface A B. If the drawing force be applied in the direction
C D, parallel to the plane A B, it will have to overcome the
friction produced by the pressure of the whole weight of the load upon
the plane; but if it be inclined upwards in the direction C E,
it will be equivalent to two forces expressed (74.) by C G and
C F. The part C G has the effect of lightening the pressure
of the carriage upon the road, and therefore of diminishing the
friction in the same proportion. The part C F draws the load along
the plane. Since C F is less than C E or C D the whole
moving force, it is evident that a part of the force of draught is
lost by this obliquity; but, on the other hand, a part of the opposing
resistance is also removed. If the latter exceed the former, an
advantage will be gained by the obliquity; but if the former exceed the
latter, force will be lost.

By mathematical reasoning, founded on these considerations, it is
proved that the best angle of draught is exactly that obliquity which
should be given to the road in order to enable the carriage to move of
itself. This obliquity is sometimes called the _angle of repose_, and
is that angle which determines the proportion of the friction to the
pressure in the second method, explained in (323.). The more rough the
road is, the greater will this angle be; and therefore it follows, that
on bad roads the obliquity of the traces to the road should be greater
than on good ones. On a smooth Macadamised way, a very slight declivity
would cause a carriage to roll by its own weight: hence, in this case,
the traces should be nearly parallel to the road.

In rail roads, for like reasons, the line of draught should be parallel
to the road, or nearly so.

(329.) When ropes or cords form a part of machinery, the effects of
their imperfect flexibility are in a certain degree counteracted by
bending them over the grooves of wheels. But although this so far
diminishes these effects as to render ropes practically useful, yet
still, in calculating the powers of machinery, it is necessary to take
into account some consequences of the rigidity of cordage which even
by these means are not removed.

To explain the way in which the stiffness of a rope modifies the
operation of a machine, we shall suppose it bent over a wheel and
stretched by weights A B, _fig. 182._, at its extremities.
The weights A and B being equal, and acting at C and D in opposite
ways, balance the wheel. If the weight A receive an addition, it will
overcome the resistance of B, and turn the wheel in the direction
D E C. Now, for the present, let us suppose that the rope
is perfectly inflexible; the wheel and weights will be turned into
the position represented in _fig. 183._ The leverage by which
A acts will be diminished, and will become O F, having been
before O C; and the leverage by which B acts will be increased to
O G, having been before O D.

But the rope not being inflexible will yield partially to the effects
of the weights A and B, and the parts A C and B D will
be bent into the forms represented in _fig. 184._ The form of
the curvature which the rope on each side of the wheel receives is
still such that the descending weight A works with a diminished
leverage F O, while the ascending weight resists it with an
increased leverage G O. Thus so much of the moving power is lost,
by the stiffness of the rope, as is necessary to compensate this
disadvantageous change in the power of the machine.




CHAP. XX.

ON THE STRENGTH OF MATERIALS.


(330.) Experimental enquiries into the laws which regulate the strength
of solid bodies, or their power to resist forces variously applied
to tear or break them, are obstructed by practical difficulties, the
nature and extent of which are so discouraging that few have ventured
to encounter them at all, and still fewer have had the steadiness to
persevere until any result showing a general law has been obtained.
These difficulties arise, partly from the great forces which must be
applied, but more from the peculiar nature of the objects of those
experiments. The end to which such an enquiry must be directed is
the development of a _general law_; that is, such a rule as would be
rigidly observed if the materials, the strength of which is the object
of enquiry, were perfectly uniform in their texture, and subject to no
casual inequalities. In proportion as these inequalities are frequent,
experiments must be multiplied, that a long average may embrace cases
varying in both extremes, so as to eliminate each other’s effects in
the final result.

The materials of which structures and works of art are composed are
liable to so many and so considerable inequalities of texture, that
any rule which can be deduced, even by the most extensive series of
experiments, must be regarded as a mean result, from which individual
examples will be found to vary in so great a degree, that more than
usual caution must be observed in its practical application. The
details of this subject belong to engineering, more properly than
to the elements of mechanics. Nevertheless, a general view of the
most important principles which have been established respecting the
strength of materials will not be misplaced in this treatise.

A piece of solid matter may be submitted to the action of a force
tending to separate its parts in several ways; the principal of which
are,--

1. To a _direct pull_,--as when a rope or wire is stretched by a
weight. When a tie-beam resists the separation of the sides of a
structure, &c.

2. To a direct pressure or thrust,--as when a weight rests upon a
pillar.

3. To a transverse strain,--as when weights on the ends of a lever
press it on the fulcrum.

(331.) If a solid be submitted to a force which draws it in the
direction of its length, having a tendency to pull its ends in
opposite directions, its strength or power to resist such a force is
proportional to the magnitude of its transverse section. Thus, suppose
a square rod of metal A B, _fig. 185._, of the breadth and
thickness of one inch, be pulled by a force in the direction A B,
and that a certain force is found sufficient to tear it; a rod of the
same metal of twice the breadth and the same thickness will require
double the force to break it; one of treble the breadth and the same
thickness will require treble the force to break it, and so on.

The reason of this is evident. A rod of double or treble the thickness,
in this case, is equivalent to two or three equal and similar rods
which equally and separately resist the drawing force, and therefore
possess a degree of strength proportionate to their number.

It will easily be perceived, that whatever be the section, the same
reasoning will be applicable, and the power of resistance will, in
general, be proportional to its magnitude or area.

If the material were perfectly uniform throughout its dimensions, the
resistance to a direct pull would not be affected by the length of the
rod. In practice, however, the increase of length is found to lessen
the strength. This is to be attributed to the increased chance of
inequality.

(332.) No satisfactory results have been obtained either by theory or
experiment respecting the laws by which solids resist compression.
The power of a perpendicular pillar to support a weight placed upon
it evidently depends on its thickness, or the magnitude of its base,
and on its height. It is certain that when the height is the same,
the strength increases with every increase of the base, but it seems
doubtful whether the strength be exactly proportional to the base. That
is, if two columns of the same material have equal heights, and the
base of one be double the base of the other, the strength of one will
be greater, but it is not certain whether it will exactly double that
of the other. According to the theory of Euler, which is in a certain
degree verified by the experiments of Musschenbrock, the strength will
be increased in a greater proportion than the base, so that, if the
base be doubled, the strength will be more than doubled.

When the base is the same, the strength is diminished by increasing the
height, and this decrease of strength is proportionally greater than
the increase of height. According to Euler’s theory, the decrease of
strength is proportional to the square of the height; that is, when
the height is increased in a two-fold proportion, the strength is
diminished in a four-fold proportion.

(333.) The strain to which solids forming the parts of structures of
every kind are most commonly exposed is the lateral or transverse
strain, or that which acts at right angles to their lengths. If any
strain act obliquely to the direction of their length it may be
resolved into two forces (76.), one in the direction of the length, and
the other at right angles to the length. That part which acts in the
direction of the length will produce either compression or a direct
pull, and its effect must be investigated accordingly.

Although the results of theory, as well as those of experimental
investigations, present great discordances respecting the transverse
strength of solids, yet there are some particulars, in which they, for
the most part, agree; to this it is our object here to confine our
observations, declining all details relating to disputed points.

Let A B C D, _fig. 186._, be a beam, supported
at its ends A and B. Its strength to support a weight at E pressing
downwards at right angles to its length is evidently proportional to
its breadth, the other things being the same. For a beam of double or
treble breadth, and of the same thickness, is equivalent to two or
three equal and similar beams placed side by side. Since each of these
would possess the same strength, the whole taken together would possess
double or treble the strength of any one of them.

When the breadth and length are the same the strength obviously
increases with the depth, but not in the same proportion. The
increase of strength is found to be much greater in proportion than
the increase of depth. By the theory of Galileo, a double or treble
thickness ought to increase the strength in a four-fold or nine-fold
proportion, and experiments in most cases do not materially vary from
this rule.

If while the breadth and depth remain the same, the length of the
beam, or rather, the distance between the points of support, vary, the
strength will vary accordingly, decreasing in the same proportion as
the length increases.

From these observations it appears, that the transverse strength of
a beam depends more on its thickness than its breadth. Hence we find
that a broad thin board is much stronger when its edge is presented
upwards. On this principle the joists or rafters of floors and roofs
are constructed.

If two beams be in all respects similar, their strengths will be in the
proportion of the squares of their lengths. Let the length, breadth,
and depth of the one be respectively double the length, breadth,
and depth of the other. By the double breadth the beam doubles its
strength, but by doubling the length half this strength is lost. Thus
the increase of length and breadth counteract each other’s effects, and
as far as they are concerned the strength of the beam is not changed.
But by doubling the thickness the strength is increased in a four-fold
proportion, that is, as the square of the length. In the same manner it
may be shown, that when all the dimensions are trebled, the strength is
increased in a nine-fold proportion, and so on.

(334.) In all structures the materials have to support their own
weight, and therefore their available strength is to be estimated
by the excess of their absolute strength above that degree of
strength which is just sufficient to support their own weight. This
consideration leads to some conclusions, of which numerous and striking
illustrations are presented in the works of nature and art.

We have seen that the absolute strength with which a lateral strain is
resisted is in the proportion of the square of the linear dimensions of
similar parts of a structure, and therefore the amount of this strength
increases rapidly with every increase of the dimensions of a body. But
at the same time the weight of the body increases in a still more rapid
proportion. Thus, if the several dimensions be doubled, the strength
will be increased in a four-fold but the weight in an eight-fold
proportion. If the dimensions be trebled, the strength will be
multiplied nine times, but the weight twenty-seven times. Again, if the
dimensions be multiplied four times, the strength will be multiplied
sixteen times, and the weight sixty-four times, and so on.

Hence it is obvious, that although the strength of a body of small
dimensions may greatly exceed its weight, and, therefore, it may be
able to support a load many times its own weight; yet by a great
increase in the dimensions the weight increasing in a much greater
degree the available strength may be much diminished, and such a
magnitude may be assigned, that the weight of the body must exceed its
strength, and it not only would be unable to support any load, but
would actually fall to pieces by its own weight.

The strength of a structure of any kind is not, therefore, to be
determined by that of its model, which will always be much stronger in
proportion to its size. All works natural and artificial have limits
of magnitude which, while their materials remain the same, they cannot
surpass.

In conformity with what has just been explained, it has been observed,
that small animals are stronger in proportion than large ones; that the
young plant has more available strength in proportion than the large
forest tree; that children are less liable to injury from accident
than men, &c. But although to a certain extent these observations are
just, yet it ought not to be forgotten, that the mechanical conclusions
which they are brought to illustrate are founded on the supposition,
that the smaller and greater bodies which are compared are composed
of precisely similar materials. This is not the case in any of the
examples here adduced.




CHAP. XXI.

ON BALANCES AND PENDULUMS.


(335.) The preceding chapters have been confined almost wholly to
the consideration of the laws of mechanics, without entering into a
particular description of the machinery and instruments dependant upon
those laws. Such descriptions would have interfered too much with the
regular progress of the subject, and it therefore appeared preferable
to devote a chapter exclusively to this portion of the work.

Perhaps there are no ideas which man receives through the medium of
sense which may not be referred ultimately to matter and motion. In
proportion, therefore, as he becomes acquainted with the properties
of the one and the laws of the other, his knowledge is extended, his
comforts are multiplied; he is enabled to bend the powers of nature to
his will, and to construct machinery which effects with ease that which
the united labour of thousands would in vain be exerted to accomplish.

Of the properties of matter, one of the most important is its weight,
and the element which mingles inseparably with the laws of motion is
time.

In the present chapter it is our intention to describe such instruments
as are usually employed for determining the weight of bodies. To
attempt a description of the various machines which are used for the
measurement of time, would lead us into too wide a field for the
present occasion, and we shall, therefore, confine ourselves to an
account of the methods which have been practised to perfect, to perfect
that instrument which affords the most correct means of measuring time,
the pendulum.

The instrument by which we are enabled to determine, with greater
accuracy than by any other means, the relative weight of a body,
compared with the weight of another body assumed as a standard, is the
balance.

[Illustration: _H. Adlard, sc._

_London, Pubd. by Longman & Co._]


_Of the Balance._

The balance may be described as consisting of an inflexible rod or
lever, called the beam, furnished with three axes; one, the fulcrum or
centre of motion situated in the middle, upon which the beam turns,
and the other two near the extremities, and at equal distances from
the middle. These last are called the points of support, and serve to
sustain the pans or scales.

The points of support and the fulcrum are in the same right line, and
the centre of gravity of the whole should be a little below the fulcrum
when the position of the beam is horizontal.

The arms of the lever being equal, it follows that if equal weights be
put into the scales no effect will be produced on the position of the
balance, and the beam will remain horizontal.

If a small addition be made to the weight in one of the scales, the
horizontality of the beam will be disturbed; and after oscillating
for some time, it will, on attaining a state of rest, form an angle
with the horizon, the extent of which is a measure of the delicacy or
sensibility of the balance.

As the sensibility of a balance is of the utmost importance in
nice scientific enquiries, we shall enter somewhat at large into a
consideration of the circumstances by which this property is influenced.

In _fig. 187._ let A B represent the beam drawn from the
horizontal position by a very small weight placed in the scale
suspended from the point of support B; then the force tending to draw
the beam from the horizontal position may be expressed by P B,
multiplied by such very small weight acting upon the point B.

Let the centre of gravity of the whole be at G; then the force acting
against the former will be G P multiplied into the weight of the
beam and scales, and when these forces are equal, the beam will rest
in an inclined position. Hence we may perceive that as the centre of
gravity is nearer to or further from the fulcrum S, (every thing else
remaining the same) the sensibility of the balance will be increased or
diminished.

For, suppose the centre of gravity were removed to _g_, then to produce
an opposing force equal to that acting upon the extremity of the beam,
the distance _g p_ from the perpendicular line must be increased
until it becomes nearly equal to G P; but for this purpose
the end of the beam B must descend, which will increase the angle
H S B.

As all weights placed in the scales are referred to the line joining
the points of support, and as this line is above the centre of gravity
of the beam when not loaded, such weights will raise the centre of
gravity; but it will be seen that the sensibility of the balance, as
far as it depends upon this cause, will remain unaltered.

For, calling the distance S G unity, the distance of the centre of
gravity from the point S (to which the weight which has been added is
referred) will be expressed by the reciprocal of the weight of the beam
so increased; that is, if the weight of the beam be doubled by weights
placed in the scales, S _g_ will be one half of S G; and if the
weight of the beam be in like manner trebled, S _g_ will be one third
of S G, and so on. And as G P varies as S G, _g p_
will be inversely proportionate to the increased weight of the beam,
and consequently, the product obtained by multiplying _g p_ by the
weight of the beam and its load will be a constant quantity, and the
sensibility of the balance, as before stated, will suffer no alteration.

We will now suppose that the fulcrum S, _fig. 188._, is situated
below the line joining the points of support, and that the centre of
gravity of the beam when not loaded is at G. Also that when a very
small weight is placed in the scale suspended from the point B, the
beam is drawn from its horizontal position, the deviation being a
measure of the sensibility of the balance. Then, as before stated,
G P multiplied by the weight of the beam will be equal to
P′ B multiplied by the very small additional weight acting on the
point B.

Now if we place equal weights in both scales, such additional weights
will be referred to the point W, and the resulting distance of the
centre of gravity from the point W, calling W G unity, will be
expressed as before by the reciprocal of the increased weight of the
loaded beam. But G P will decrease in a greater proportion than
W G: thus, supposing the weight of the beam to be doubled, W _g_
would be one half of W G; but _g p_, as will be evident on
an inspection of the figure, will be less than half of G P; and
the same small weight which was before applied to the point B, if
now added, would depress the point B, until the distance _g p_
became such as that, when multiplied by the weight of the whole, the
product would be as before equal to P′ B, multiplied by the before
mentioned very small added weight. The sensibility of the balance,
therefore, in this case would be increased.

If the beam be sufficiently loaded, the centre of gravity will at
length be raised to the fulcrum S, and the beam will rest indifferently
in any position. If more weight be then added, the centre of gravity
will be raised above the fulcrum, and the beam will turn over.

Lastly, if the fulcrum S, _fig. 189._, is above the line joining
the two points of support, as any additional weights placed in the
scales will be referred to the point W, in the line joining A and B,
if the weight of the beam be doubled by such added weights, and the
centre of gravity be consequently raised to _g_, W _g_ will become
equal to half of W G. But _g p_, being greater than one half
of G P, the end of the beam B will rise until _g p_ becomes
such as to be equal, when multiplied by the whole increased weight of
the beam, to P B, multiplied by the small weight, which we suppose
to have been placed as in the preceding examples, in the scale.

From what has been said it will be seen that there are three positions
of the fulcrum which influence the sensibility of the balance: first,
when the fulcrum and the points of support are in a right line, when
the sensibility of the balance will remain the same, though the weight
with which the beam is loaded should be varied: secondly, when the
fulcrum is below the line joining the two points of support, in which
case the sensibility of the balance will be increased by additional
weights, until at length the centre of gravity is raised above the
fulcrum, when the beam will turn over; and, thirdly, when the fulcrum
is above the line joining the two points of support, in which case the
sensibility of the balance will be diminished as the weight with which
the beam is loaded is increased.

The sensibility of a balance, as here defined, is the angular deviation
of the beam occasioned by placing an additional constant small weight
in one of the scales; but it is frequently expressed by the proportion
which such small additional weight bears to the weight of the beam
and its load, and sometimes to the weight the value of which is to be
determined.

This proportion, however, will evidently vary with different weights,
except in the case where the centre of gravity of the beam is in the
line joining the points supporting the scales, the fulcrum being
above this line, and it is therefore necessary, in every other case,
when speaking of the sensibility of the balance, to designate the
weight with which it is loaded: thus, if a balance has a troy pound in
each scale, and the horizontality of the beam varies a certain small
quantity, just perceptible on the addition of one hundredth of a grain,
we say that the balance is sensible to 1/1152000 part of its load with
a pound in each scale, or that it will determine the weight of a troy
pound within 1/576000 part of the whole.

The nearer the centre of gravity of a balance is to its fulcrum
the slower will be the oscillations of the beam. The number of
oscillations, therefore, made by the beam in a given time (a minute
for example), affords the most accurate method of judging of the
sensibility of the balance, which will be the greater as the
oscillations are fewer.

Balances of the most perfect kind, and of such only it is our present
object to treat, are usually furnished with adjustments, by means of
which the length of the arms, or the distances of the fulcrum from the
points of support, may be equalised, and the fulcrum and the two points
of support be placed in a right line; but these adjustments, as will
hereafter be seen, are not absolutely necessary.

The beam is variously constructed, according to the purposes to
which the balance is to be applied. Sometimes it is made of a rod of
solid steel; sometimes of two hollow cones joined at their bases;
and, in some balances, the beam is a frame in the form of a rhombus:
the principal object in all, however, is to combine strength and
inflexibility with lightness.

A balance of the best kind, made by Troughton, is so contrived as to
be contained, when not in use, in a drawer below the case; and when
in use, it is protected from any disturbance from currents of air, by
being enclosed in the case above the drawer, the back and front of
which are of plate glass. There are doors in the sides, through which
the scale-pans are loaded, and there is a door at the top through which
the beam may be taken out.

A strong brass pillar, in the centre of the box, supports a square
piece, on the front and back of which rise two arches, nearly
semicircular, on which are fixed two horizontal planes of agate,
intended to support the fulcrum. Within the pillar is a cylindrical
tube, which slides up and down by means of a handle on the outside
of the case. To the top of this interior tube is fixed an arch, the
terminations of which pass beneath and outside of the two arches before
described. These terminations are formed into Y _s_, destined to
receive the ends of the fulcrum, which are made cylindrical for this
purpose, when the interior tube is elevated in order to relieve the
axis when the balance is not in use. On depressing the interior tube,
the Y _s_ quit the axis, and leave it in its proper position on the
agate planes. The beam is about eighteen inches long, and is formed of
two hollow cones of brass, joined at their bases. The thickness of the
brass does not exceed 0·02 of an inch, but by means of circular rings
driven into the cones at intervals they are rendered almost inflexible.
Across the middle of the beam passes a cylinder of steel, the lower
side of which is formed into an edge, having an angle of about thirty
degrees, which, being hardened and well polished, constitutes the
fulcrum, and rests upon the agate planes for the length of about 0·05
of an inch.

Each point of suspension is formed of an axis having two sharp concave
edges, upon which rest at right angles two other sharp concave
edges formed in the spur-shaped piece to which the strings carrying
the scale-pan are attached. The two points are adjustable, the one
horizontally, for the purpose of equalising the arms of the beam, and
the other vertically, for bringing the points of suspension and the
fulcrum into a right line.

Such is the form of Troughton’s balance: we shall now give the
description of a balance as constructed by Mr. Robinson of Devonshire
Street, Portland Place:--

The beam of this balance is only ten inches long. It is a frame of
bell-metal in the form of a rhombus. The fulcrum is an equilateral
triangular prism of steel one inch in length; but the edge on which
the beam vibrates is formed to an angle of 120°, in order to prevent
any injury from the weight with which it may be loaded. The chief
peculiarity in this balance consists in the knife-edge which forms
the fulcrum bearing upon an agate plane throughout its whole length,
whereas we have seen in the balance before described that the whole
weight is supported by portions only of the knife-edge, amounting
together to one tenth of an inch. The supports for the scales are
knife-edges each six tenths of an inch long. These are each furnished
with two pressing screws, by means of which they may be made parallel
to the central knife-edge.

Each end of the beam is sprung obliquely upwards and towards the
middle, so as to form a spring through which a pushing screw passes,
which serves to vary the distance of the point of support from the
fulcrum, and, at the same time, by its oblique action to raise or
depress it, so as to furnish a means of bringing the points of support
and the fulcrum into a right line.

A piece of wire, four inches long, on which a screw is cut, proceeds
from the middle of the beam downwards. This is pointed to serve as
an index, and a small brass ball moves on the screw, by changing the
situation of which the place of the centre of gravity may be varied at
pleasure.

The fulcrum, as before remarked, rests upon an agate plane throughout
its whole length, and the scale-pans are attached to planes of agate
which rest upon the knife-edges forming the points of support. This
method of supporting the scale-pans, we have reason to believe, is
due to Mr. Cavendish. Upon the lower half of the pillar to which the
agate plane is fixed, a tube slides up and down by means of a lever
which passes to the outside of the case. From the top of this tube
arms proceed obliquely towards the ends of the balance, serving to
support a horizontal piece, carrying at each extremity two sets of Y
_s_, one a little above the other. The upper Y _s_ are destined to
receive the agate planes to which the scale-pans are attached, and thus
to relieve the knife-edges from their pressure; the lower to receive
the knife-edges which, form the points of support, consequently these
latter Y _s_, when in action, sustain the whole beam.

When the lever is freed from a notch in which it is lodged, a spring
is allowed to act upon the tube we have mentioned, and to elevate it.
The upper Y _s_ first meet the agate planes carrying the scale-pans
and free them from the knife-edges. The lower Y _s_ then come into
action and raise the whole beam, elevating the central knife-edge above
the agate plane. This is the usual state of the balance when not in
use: when it is to be brought into action, the reverse of what we
have described takes place. On pressing down the lever, the central
knife-edge first meets the agate plane, and afterwards the two agate
planes carrying the scale-pans are deposited upon their supporting
knife-edges.

A balance of this construction was employed by the writer of this
article in adjusting the national standard pound. With a pound troy in
each scale, the addition of one hundredth of a grain caused the index
to vary one division, equal to one tenth of an inch, and Mr. Robinson
adjusts these balances so that with one thousand grains in each scale,
the index varies perceptibly on the addition of one thousandth of a
grain, or of one-millionth part of the weight to be determined.

It may not be uninteresting to subjoin, from the Philosophical
Transactions for 1826, the description of a balance perhaps the most
sensible that has yet been made, constructed for verifying the national
standard bushel. The author says,--

“The weight of the bushel measure, together with the 80 lbs. of
water it should contain, was about 250 lbs.; and as I could find
no balance capable of determining so large a weight with sufficient
accuracy, I was under the necessity of constructing one for this
express purpose.

“I first tried cast iron; but though the beam was made as light as was
consistent with the requisite degree of strength, the inertia of such
a mass appeared to be so considerable, that much time must have been
lost before the balance would have answered to the small differences I
wished to ascertain. Lightness was a property essentially necessary,
and bulk was very desirable, in order to preclude such errors as might
arise from the beam being partially affected by sudden alterations of
temperature. I therefore determined to employ wood, a material in which
the requisites I sought were combined. The beam was made of a plank
of mahogany, about 7O inches long, 22 inches wide, and 2-1/4 thick,
tapering from the middle to the extremities. An opening was cut in the
centre, and strong blocks screwed to each side of the plank, to form a
bearing for the back of a knife-edge which passed through the centre.
Blocks were also screwed to each side at the extremities of the beam on
which rested the backs of the knife-edges for supporting the pans. The
opening in the centre was made sufficiently large to admit the support
hereafter to be described, upon which the knife-edge rested.

“In all beams which I have seen, with the exception of those made by
Mr. Robinson, the whole weight is sustained by short portions at the
extremities of the knife-edge; and the weight being thus thrown upon a
few points, the knife-edge becomes more liable to change its figure and
to suffer injury.

“To remedy this defect, the central knife-edge of the beam I am
describing was made 6 inches, and the two others 5 inches long. They
were triangular prisms with equal sides of three fourths of an inch,
very carefully finished, and the edges ultimately formed to an angle of
120°.

“Each knife-edge was screwed to a thick plate of brass, the surfaces in
contact having been previously ground together; and these plates were
screwed to the beam, the knife-edges being placed in the same plane,
and as nearly equidistant and parallel to each other as could be done
by construction.

“The support upon which the central knife-edge rested throughout its
whole length was formed of a plate of polished hard steel, screwed to
a block of cast iron. This block was passed through the opening before
mentioned in the centre of the beam, and properly attached to a frame
of cast iron.

“The stirrups to which the scales were hooked rested upon plates of
polished steel to which they were attached, and the under surfaces of
which were formed by careful grinding into cylindrical segments. These
were in contact with the knife-edges their whole length, and were
known to be in their proper position by the correspondence of their
extremities with those of the knife-edges. A well imagined contrivance
was applied by Mr. Bate for raising the beam when loaded, in order
to prevent unnecessary wear of the knife-edge, and for the purpose of
adjusting the place of the centre of gravity, when the beam was loaded
with the weight required to be determined, a screw carrying a movable
ball projected vertically from the middle of die beam.

“The performance of this balance fully equalled my expectations. With
two hundred and fifty pounds in each scale, the addition of a single
grain occasioned an immediate variation in the index of one twentieth
of an inch, the radius being fifty inches.”

From the preceding account it appears that this balance is sensible to
1/1750000 part of the weight which was to be determined.

We shall now describe the method to be pursued in adjusting a balance.

1. To bring the points of suspension and the fulcrum into a right line.

Make the vibrations of the balance very slow by moving the weight which
influences the centre of gravity, and bring the beam into a horizontal
position, by means of small bits of paper thrown into the scales. Then
load the scales with nearly the greatest weight the beam is fitted to
carry. If the vibrations are performed in the same time as before, no
further adjustment is necessary; but if the beam vibrates quicker,
or if it oversets, cause it to vibrate in the same time as at first,
by moving the adjusting weight, and note the distance through which
the weight has passed. Move the weight then in the contrary direction
through double this distance, and then produce the former slow motion
by means of the screw acting vertically on the point of support. Repeat
this operation until the adjustment is perfect.

2. To make the arms of the beam of an equal length.

Put weights in the scales as before; bring the beam as nearly as
possible to a horizontal position, and note the division at which the
index stands; unhook the scales, and transfer them with their weights
to the other ends of the beam, when, if the index points to the same
division, the arms are of an equal length; but if not, bring the index
to the division which had been noted, by placing small weights in one
or the other scale. Take away half these weights, and bring the index
again to the observed division by the adjusting screw, which acts
horizontally on the point of support. If the scale-pans are known to be
of the same weight, it will not be necessary to change the scales, but
merely to transfer the weights from one scale-pan to the other.


_Of the Use of the Balance._

Though we have described the method of adjusting the balance, these
adjustments, as we have before remarked, may be dispensed with.
Indeed, in all delicate scientific operations, it is advisable never
to rely upon adjustments, which, after every care has been employed in
effecting them, can only be considered as approximations to the truth.
We shall, therefore, now describe the best method of ascertaining the
weight of a body, and which does not depend on the accuracy of these
adjustments.

Having levelled the case which contains the balance, and thrown the
beam out of action, place a weight in each scale-pan nearly equal to
the weight which is to be determined. Lower the beam very gently till
it is in action, and by means of the adjustment for raising or lowering
the centre of gravity, cause the beam to vibrate very slowly. Remove
these weights, and place the substance, the weight of which is to be
determined in one of the scale-pans; carefully counterpoise it by means
of any convenient substances put into the other scale-pan, and observe
the division at which the index stands; remove the body, the weight of
which is to be ascertained, and substitute standard weights for it so
as to bring the index to the same division as before. These weights
will be equal to the weight of the body.

If it be required to compare two weights together which are intended
to be equal, and to ascertain their difference, if any, the method
of proceeding will be nearly the same. The standard weight is to be
carefully counterpoised, and the division at which the index stands,
noted. And now it will be convenient to add in either of the scales
some small weight, such as one or two hundredths of a grain, and mark
the number of divisions passed over in consequence by the index, by
which the value of one division of the scale will be known. This should
be repeated a few times, and the mean taken for greater certainty.

Having noted the division at which the index rests, the standard
weight is to be removed, and the weight which is to be compared with
it substituted for it. The index is then again to be noted, and the
difference between this and the former indication will give the
difference between the weights in parts of a grain.

If the balance is adjusted so as to be very sensible, it will be long
before it comes to a state of rest. It may, therefore, sometimes be
advisable to take the mean of the extent of the vibrations of the index
as the point where it would rest, and this may be repeated several
times for greater accuracy. It must, however, be remembered, that it is
not safe to do this when the extent of the vibrations is beyond one or
two divisions of the scale; but with this limitation it is, perhaps, as
good a method as can be pursued.

Many precautions are necessary to ensure a satisfactory result. The
weights should never be touched by the hand; for not only would
this oxydate the weight, but by raising its temperature it would
appear lighter, when placed in the scale-pan, than it should do, in
consequence of the ascent of the heated air. For the larger weights a
wooden fork or tongs, according to the form of the weight, should be
employed; and for the smaller, a pair of forceps made of copper will be
found the most convenient. This metal possessing sufficient elasticity
to open the forceps on their being released from pressure, and yet not
opposing a resistance sufficient to interfere with that delicacy of
touch which is desirable in such operations.


_Of Weights._

It must be obvious, that the excellence of the balance would be of
little use, unless the weights employed were equally to be depended
upon. The weights may either be accurately adjusted, or the difference
between each weight and the standard may be determined, and,
consequently, its true value ascertained. It has been already shown how
the latter may be effected, in the instructions which have been given
for comparing two weights together; and we shall now show the readiest
mode of adjusting weights to an exact equality with a given standard.

The material of the weight may be either brass or platina, and its form
may be cylindrical: the diameter being nearly twice the height. A small
spherical knob is screwed into the centre, a space being left under
the screw to receive the portions of fine wire used in the adjustment.
It will be convenient to form a cavity in the bottom of each weight to
receive the knob of the weight upon which it may be placed.

Each weight is now to be compared with the standard, and should it
be too heavy, it is to be reduced till it becomes in a very small
degree too light, when the amount of the deficiency is to be carefully
determined.

Some very fine silver wire is now to be taken, and the weight of three
or four feet of it ascertained. From this it will be known what length
of the wire is equal to the error of the weight to be adjusted; and
this length being cut off is to be enclosed under the screw. To guard
against any possible error, it will be advisable before the screw
is firmly fixed in its place, again to compare the weight with the
standard.

The most approved method of making weights expressing the decimal parts
of a grain, is to determine, as before, with great care, the weight of
a certain length of fine wire, and then to cut off such portions as are
equal to the weights required.

Before we conclude this article we shall give a description, from the
Annals of Philosophy for 1825, of “a very sensible balance,” used by
the late Dr. Black:--

“A thin piece of fir wood, not thicker than a shilling, and a foot
long, three tenths of an inch broad in the middle, and one tenth and
a half at each end, is divided by transverse lines into twenty parts;
that is, ten parts on each side of the middle. These are the principal
divisions, and each of them is subdivided into halves and quarters.
Across the middle is fixed one of the smallest needles I could procure,
to serve as an axis, and it is fixed in its place by means of a little
sealing wax. The numeration of the divisions is from the middle to each
end of the beam. The fulcrum is a bit of plate brass, the middle of
which lies flat on my table when I use the balance, and the two ends
are bent up to a right angle so as to stand upright. These two ends
are ground at the same time on a flat hone, that the extreme surfaces
of them may be in the same plane; and their distance is such that the
needle, when laid across them, rests on them at a small distance from
the sides of the beam. They rise above the surface of the table only
one tenth and a half or two tenths of an inch, so that the beam is very
limited in its play. See _fig. 190._

“The weights I use are one globule of gold, which weighs one grain, and
two or three others which weigh one tenth of a grain each; and also
a number of small rings of fine brass wire, made in the manner first
mentioned by Mr. Lewis, by appending a weight to the wire, and coiling
it with the tension of that weight round a thicker brass wire in a
close spiral, after which, the extremity of the spiral being tied hard
with waxed thread, I put the covered wire into a vice, and applying
a sharp knife, which is struck with a hammer, I cut through a great
number of the coils at one stroke, and find them as exactly equal to
one another as can be desired. Those I use happen to be the 1/30 part
of a grain each, or 300 of them weigh ten grains; but I have others
much lighter.

“You will perceive that by means of these weights placed on different
parts of the beam, I can learn the weight of any little mass from one
grain, or a little more, to the 1/1200 of a grain. For if the thing to
be weighed weighs one grain, it will, when placed on one extremity of
the beam, counterpoise the large gold weight at the other extremity.
If it weighs half a grain it will counterpoise the heavy gold weight
placed at 5. If it weigh 6/10 of a grain, you must place the heavy
gold weight at 5, and one of the lighter ones at the extremity to
counterpoise it, and if it weighs only one or two, or three or four
hundredths of a grain, it will be counterpoised by one of the small
gold weights placed at the first or second, or third or fourth
division. If, on the contrary, it weighs one grain and a fraction, it
will be counterpoised by the heavy gold weight at the extremity, and
one or more of the lighter ones placed in some other part of the beam.

“This beam has served me hitherto for every purpose; but had I occasion
for a more delicate one, I could make it easily by taking a much
thinner and lighter slip of wood, and grinding the needle to give it an
edge. It would also be easy to make it carry small scales of paper for
particular purposes.”

The writer of this article has used a balance of this kind, and
finds that it is sensible to 1/1000 of a grain when loaded with ten
grains. It is necessary, however, where accuracy is required, to
employ a scale-pan. This may be made of thin card paper, shaped as in
_fig. 191._

A thread is to be passed through the two ends, by tightening which they
may be brought near each other.

The most convenient weights for this beam appear to be two of one grain
each, and one of one tenth of a grain. They should be made of straight
wire; and if the beam be notched at the divisions, they may be lodged
in these notches very conveniently. Ten divisions on each side of the
middle will be sufficient. The weight of the scale-pan must first be
carefully ascertained, in order that it may be deducted from the
weight, afterwards determined, of the scale-pan and the substance it
may contain.

If the scale-pan be placed at the tenth division of the beam, it is
evident that by means of the two grain weights, a greater weight cannot
be determined than one grain and nine tenths; but if the scale-pan be
placed at any other division of the beam, the resulting apparent weight
must be increased by multiplying it by ten, and dividing by the number
of the division at which the scale-pan is placed; and in this manner it
is evident that if the scale-pan be placed at the division numbered 1,
a weight amounting to nineteen grains may be determined.

We have been tempted to describe this little apparatus, because it is
extremely simple in its construction, may be easily made, and may be
very usefully employed on many occasions where extreme accuracy is not
necessary.


_Description of the Steelyard._

The steelyard is a lever, having unequal arms; and in its most simple
form it is so arranged, that one weight alone serves to determine a
great variety of others, by sliding it along the longer arm of the
lever, and thus varying its distance from the fulcrum.

It has been demonstrated, chapter xiii., that in the lever the
proportion of the power to the weight will be always the same as
that of their distances from the fulcrum, taken in a reverse order;
consequently, when a constant weight is used, and an equilibrium
established by sliding this weight on the longer arm of the lever, the
relative weight of the substance weighed, to the constant weight, will
be in the same proportion as the distance of the constant weight from
the fulcrum is to the length of the shorter arm.

Thus, suppose the length of the shorter arm, or the distance of
the fulcrum from the point from which the weight to be determined
is suspended, to be one inch; let the longer arm of the lever be
divided into parts of one inch each, beginning at the fulcrum. Now
let the constant weight be equal to one pound, and let the steelyard
be so constructed that the shorter arm shall be sufficiently heavy
to counterpoise the longer when the bar is unloaded. Then suppose a
substance, the weight of which is five pounds, to be suspended from the
shorter arm. It will be found that when the constant weight is placed
at the distance of five inches from the fulcrum, the weights will be in
equilibrium, and the bar consequently horizontal. In this steelyard,
therefore, the distance of each inch from the fulcrum indicates a
weight of one pound. An instrument of this form was used by the Romans,
and it is usually described as the Roman statera or steelyard. A
representation of it is given at _fig. 192._

The steelyard is in very general use for the coarser purposes of
commerce, but constructed differently from that which we have
described. The beam with the scales or hooks is seldom in equilibrium
upon the point F, when the weight P is removed; but the longer arm
usually preponderates, and the commencement of the graduations,
therefore, is not at F, but at some point between B and F. The common
steelyard, which we have represented at _fig. 193._, is usually
furnished with two points, from either of which the substance, the
weight of which is to be determined, may be suspended. The value of
the divisions is in this case increased in proportion as the length
of the shorter arm is decreased. Thus, in the steelyard which we have
described, if there be a second point of suspension at the distance of
half an inch from the fulcrum, each division of the longer arm will
indicate two pounds instead of one, and these divisions are usually
marked upon the opposite edge of the steelyard, which is made to turn
over.

This instrument is very convenient, because it requires but one weight;
and the pressure on the fulcrum is less than in the balance, when the
substance to be weighed is heavier than the constant weight. But,
on the contrary, when the constant weight exceeds the substance to
be weighed, the pressure on the fulcrum is greater in the steelyard
than in the balance, and the balance is, therefore, preferable in
determining small weights. There is also an advantage in the balance,
because the subdivision of weights can be effected with a greater
degree of precision than the subdivision of the arm of the steelyard.


_C. Paul’s Steelyard._

A steelyard has been constructed by Mr. C. Paul, inspector of weights
and measures at Geneva, which is much to be preferred to that in
common use. Mr. C. Paul states, that steelyards have two advantages
over balances: 1. That their axis of suspension is not loaded with
any other weight than that of the merchandise, the constant weight of
the apparatus itself excepted; while the axis of the balance, besides
the weight of the instrument, sustains a weight double to that of
the merchandise. 2. The use of the balance requires a considerable
assortment of weights, which causes a proportional increase in the
price of the apparatus, independently of the chances of error which it
multiplies, and of the time employed in producing an equilibrium.

1. In C. Paul’s steelyard the centres of the movement of suspension, or
the two constant centres, are placed on the exact line of the divisions
of the beam; an elevation almost imperceptible in the axis of the beam,
destined to compensate for the very slight flexion of the bar, alone
excepted.

2. The apparatus, by the construction of the beam, is balanced below
its centre of motion, so that when no weight is suspended the beam
naturally remains horizontal, and resumes that position when removed
from it, as also when the steelyard is loaded, and the weight is at
the division which ought to show how much the merchandise weighs. The
horizontal situation in this steelyard, as well as in the others, is
known by means of the tongue which rises vertically above the axis of
suspension.

3. It may be discovered, that the steelyard is deranged if, when not
loaded, the beam does not remain horizontal.

4. The advantage of a great and a small side (which in the other
augments the extent of their power of weighing) is supplied by a very
simple process, which accomplishes the same end with some additional
advantages. This process is to employ on the same division different
weights. The numbers of the divisions on the bar, point out the degree
of heaviness expressed by the corresponding weights. For example, when
the large weight of the large steelyard weighs 16 lbs., each
division it passes over on the bar is equivalent to a pound; the small
weight, weighing sixteen times less than the large one, will represent
on each of these divisions the sixteenth part of a pound, or one ounce;
and the opposite face of the bar is marked by pounds at each sixteenth
division. In this construction, therefore, we have the advantage
of being able, by employing both weights at once, to ascertain,
for example, almost within an ounce, the weight of 500 pounds of
merchandise. It will be sufficient to add what is indicated by the
small weight in ounces, to that of the large one in pounds, after an
equilibrium has been obtained by the position of the two weights, viz.
the large one placed at the next pound below its real weight, and the
small one at the division which determines the number of ounces to be
added.

5. As the beam is graduated only on one edge, it may have the form of
a thin bar, which renders it much less susceptible of being bent by
the action of the weight, and affords room for making the figures more
visible on both the faces.

6. In these steelyards the disposition of the axes is not only such
that the beam represents a mathematical lever without weight, but in
the principle of its division, the interval between every two divisions
is a determined and aliquot part of the distance between the two fixed
points of suspension; and each of the two weights employed has for its
absolute weight the unity of the weight it represents, multiplied by
the number of the divisions contained in the interval between the two
centres of motion.

Thus, supposing the arms of the steelyard divided in such a manner
that ten divisions are exactly contained in the distance between the
two constant centres of motion, a weight to express the pounds on each
division of the beam must really weigh ten pounds; that to point out
the ounces on the same divisions must weigh ten ounces, &c. So that the
same steelyard may be adapted to any system of measures whatever, and
in particular to the decimal system, by varying the absolute heaviness
of the weights, and their relation with each other.

But to trace out, in a few words, the advantages of the steelyards
constructed by C. Paul for commercial purposes, we shall only observe,--

1. That the buyer and seller are certain of the correctness of the
instrument, if the beam remains horizontal when it is unloaded and in
its usual position. 2. That these steelyards have one suspension less
than the old ones, and are so much more simple. 3. That by these means
we obtain, with the greatest facility, by employing two weights, the
exact weight of merchandise, with all the approximation that can be
desired, and even with a greater precision than that given by common
balances. There are few of these which, when loaded with 500 pounds
at each end, give decided indication of an ounce variation; and the
steelyards of C. Paul possess that advantage, and cost one half less
than balances of equal dominion. 4. In the last place, we may verify at
pleasure the justness of the weights, by the transposition which their
ratio to each other will permit; for example, by observing whether,
when the weight of one pound is brought back one division, and the
weight of one ounce carried forward sixteen divisions, the equilibrium
still remains.

It is on this simple and advantageous principle that C. Paul has
constructed his universal steelyard. It serves for weighing in the
usual manner, and according to any system of weights, all ponderable
bodies to the precision of half a grain in the weight of a hundred
ounces; that is to say, of a ten-thousandth part. It is employed,
besides, for ascertaining the specific gravity of solids, of liquids,
and of air, by processes extremely simple, and which do not require
many subdivisions in the weights.

We think the description above given will be sufficiently intelligible
without a representation of this instrument. An account of its
application to the determination of specific gravities will be found in
vol. iii. of the Philosophical Magazine.


_The Chinese Steelyard._

This instrument is used in China and the East Indies for weighing
gems, precious metals, &c. The beam is a small rod of ivory, about
a foot in length. Upon this are three lines of divisions, marked by
fine silver studs, all beginning from the end of the beam, whence the
first is extended 8 inches, the second 6-1/2, and the third 8-1/2. The
first is European weight, and the other two Chinese. At the other end
of the beam hangs a round scale, and at three several distances from
this end are holes, through which pass so many fine strings, serving as
different points of suspension. The first distance makes 1-3/5 inches,
the second 3-1/5, or double the former, and the third 4-4/5, or triple
the same. The instrument, when used, is held by one of the strings,
and a sealed weight of about 1-1/4 oz. troy, is slid upon the
beam until an equilibrium is produced; the weight of the body is then
indicated by the graduated scale above mentioned.


_The Danish Balance._

The Danish balance is a straight bar or lever, having a heavy weight
fixed to one end, and a hook or scale-pan to receive the substance,
the weight of which is to be determined, suspended from the other
end. The fulcrum is moveable, and is made to slide upon the bar, till
the beam rests in a horizontal position, when the place of the fulcrum
indicates the weight required. In order to construct a balance of this
kind, let the distance of the centre of gravity from that point to
which the substance to be weighed is suspended be found by experiment,
when the beam is unloaded. Multiply this distance by the weight of the
whole apparatus, and divide the product by the weight of the apparatus
increased by the weight of the body. This will give the distance from
the point of suspension, at which the fulcrum being placed, the whole
will be in equilibrio: for example, supposing the distance of the
centre of gravity from the point of suspension to be 10 inches, and
the weight of the whole apparatus to be ten pounds; suppose, also, it
were required to mark the divisions which should indicate weights of
one, two, or three pounds, &c. First, for the place of the division
indicating one pound we have (10 × 10)/(10 + 1) = 100/(10 + 1) = 9-1/11
inches, the place of the division marking one pound. For two pounds we
have 100/(10 + 2) = 8-1/3 inches, the place of the division indicating
two pounds; and for three pounds 100/(10 + 3) = 7-9/13 inches for the
place of the division indicating three pounds, and so on.

This balance is subject to the inconvenience of the divisions becoming
much shorter as the weight increases. The distance between the
divisions indicating one and two pounds being, in the example we have
given, about seven tenths of an inch, whilst that between 20 and 21
pounds is only one tenth of an inch; consequently a very small error
in the place of the divisions indicating the larger weights would
occasion very inaccurate results. The Danish balance is represented at
_fig. 194._


_The Bent Lever Balance._

This instrument is represented at _fig. 195._ The weight at C, is
fixed at the end of the bent lever A B C, which is supported
by its axis B on the pillar I H. A scale-pan E, is suspended from
the other end of the lever at A. Through the centre of motion B draw
the horizontal line K B G, upon which, from A and C let fall
the perpendiculars A K and C D. Then if B K and B D
are reciprocally proportional to the weights at A and C, they will be
in equilibrio, but if not, the weight C will move upwards or downwards
along the arc F G till that ratio is obtained. If the lever be so
bent that when A coincides with the line G K, C coincides with
the vertical B H, then as C moves from F to G, its momentum will
increase while that of the weight in the scale-pan E will decrease.
Hence the weight in E, corresponding to different positions of the
balance, may be expressed on the graduated arc F G.


_Brady’s Balance, or Weighing Apparatus._

This partakes of the properties both of the bent lever balance and of
the steelyard. It is represented, at _fig. 196._ A B C
is a frame of cast iron having a great part of its weight towards A. F
is a fulcrum, and E a moveable suspender, having a scale and hook
at its lower extremity. E K G are three distinct places, to
which the suspender E may be applied, and to which belong respectively
the three graduated scales of division expressing weights, _f_ C,
_c d_, and _a b_. When the scale and suspender are applied at
G, the apparatus is in equilibrio, with the edge A B horizontal,
and the suspender cuts the zero on the scale _a b_. Now, any
substance, the weight of which is to be ascertained, being put into
the scale, the whole apparatus turns about F, and the part towards B
descends till the equilibrium is again established, when the weight
of the body is read off from the scale _a b_, which registers to
ounces and extends to two pounds. If the weight of the body exceed two
pounds, and be less than eleven pounds, the suspender is placed at K;
and when the scale is empty, the number 2 is found to the right of the
index of the suspender. If now weights exceeding two pounds be placed
in the scale, the whole again turns about F, and the weight of the
body is shown on the graduated arc _c d_, which extends to eleven
pounds, and registers to every two ounces.

If the weight of the body exceed eleven pounds, the suspender is hung
on at E, and the weights are ascertained in the same manner on the
scale _f_ C to thirty pounds, the subdivisions being on this scale
quarters of pounds. The same principles would obviously apply to
weights greater or less than the above. To prevent mistake, the three
points of support G, K, E, are numbered 1, 2, 3; and the corresponding
arcs are respectively numbered in the same manner. When the hook is
used instead of the scale, the latter is turned upwards, there being a
joint at _m_ for that purpose.


_The Weighing Machine for Turnpike Roads._

This machine is for the purpose of ascertaining the weight of heavy
bodies, such as wheel carriages. It consists of a wooden platform
placed over a pit made in the line of the road, and which contains the
machinery. The pit is walled withinside, and the platform is fitted to
the walls of the pit, but without touching them, and it is therefore
at liberty to move freely up and down. The platform is supported by
levers placed beneath it, and is exactly level with the surface of the
road, so that a carriage is easily drawn on it, the wheels being upon
the platform whilst the horses are upon the solid ground beyond it. The
construction of this machine will be readily understood by reference to
_fig. 197._, in which the platform is supposed to be transparent
so as to allow of the levers being seen below it.

A, B, C, D, represent four levers tending towards the centre of the
platform, and each moveable on its fulcrum at A, B, C, D; the fulcrum
of each rests upon a piece securely fixed in the corner of the pit.
The platform is supported upon the cross pins _a_, _b_, _c_, _d_,
by means of pieces of iron which project from it near its corners, and
which are represented in the plate by the short dark lines crossing the
pins _a_, _b_, _c_, _d_. The four levers are connected under the centre
of the platform, but not so as to prevent their free motion, and are
supported by a long lever at the point F, the fulcrum of which rests
upon a piece of masonry at E: the end of this last lever passes below
the surface of the road into the turnpike house, and is there attached
to one arm of a balance, or, as in Salmon’s patent weighing machine, to
a strap passing round a cylinder which winds up a small weight round a
spiral, and indicates, by means of an index, the weight placed upon the
platform.

[Illustration: _Captn. Kater, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

Suppose the distance from A to F to be ten times as great as that from
A to _a_, then a force of one pound applied beneath F would balance
ten pounds applied at _a_, or upon the platform. Again: let the
distance from E to G be also ten times greater than the distance from
the fulcrum E to F; then a force of one pound applied to raise up the
end of the lever G would counterpoise a weight of ten pounds placed
upon F. Now, as we gain ten times the power by the first levers, and
ten times more by the lever E G, it follows, that a force of one
pound tending to elevate G, would balance 100 lbs. placed on the
platform; so that if the end of the lever G be attached to one arm of
a balance, a weight of 10 lbs. placed in a scale suspended from
the other arm, will express the value of 1000 lbs. placed upon
the platform. The levers are counterpoised, when the platform is not
loaded, by a weight H applied to the end of the last lever, continued
beyond the fulcrum for that purpose.


_Of Instruments for weighing by means of a Spring._

The spring is well adapted to the construction of a weighing machine,
from the property it possesses of yielding in proportion to the force
impressed, and consequently giving a scale of equal parts for equal
additions of weight. It is liable, however, to suffer injury, unless
the steel of which it is composed be very well tempered, from a want
of perfect elasticity, and, consequently, from not returning to its
original place after it has been forcibly compressed. This, however,
must be considered to arise, in a great measure, from imperfection
of workmanship, or of the material employed, or from its having been
subjected to too great a force.


_The Spring Steelyard._

The little instrument known by this name is in very general use, and
is particularly convenient where great accuracy is not necessary, as
a spring which will ascertain weights from one pound to fifty, is
contained in a cylinder only 4 inches long and 3/4 inch diameter.

This instrument is represented at _fig. 198._ It consists of a
tube of iron, of the dimensions just stated, closed at the bottom,
to which is attached an iron hook for supporting the substance to be
weighed; a rod of iron _a b_, four tenths of an inch wide and one
tenth thick, is firmly fixed in the circular plate _c d_, which
slides smoothly in the iron tube.

A strong steel spring is also fastened to this plate, and passed round
the rod _a b_ without touching it, and without coming in contact
with the interior of the cylindrical tube. The tube is closed at the
top by a circular piece of iron through which the piece _a b_
passes.

Upon the face of _a b_ the weight is expressed by divisions,
each of which indicates one pound, and five of such divisions in the
instrument now before us occupy two tenths of an inch. The divisions,
notwithstanding, are of sufficient size to enable them to be subdivided
by the eye.

To use this instrument, the substance to be weighed is suspended by the
hook, the instrument being held by a ring passing through the rod at
the other end. The spring then suffers a compression proportionate to
the weight, and the number of pounds is indicated by the division on
the rod which is cut by the top of the cylindrical tube.


_Salter’s improved Spring Balance._

A very neat form of the instrument last described has been recently
brought before the public by Mr. Salter, under the name of the Improved
Spring Balance. It is represented at _fig. 199._ The spring is
contained in the upper half of a cylinder behind the brass plate
forming the face of the instrument; and the rod is fixed to the lower
extremity of the spring, which is consequently extended, instead of
being compressed, by the application of the weight. The divisions, each
indicating half a pound, are engraved upon the face of the brass plate,
and are pointed out by an index attached to the rod.


_Marriott’s Patent Dial Weighing Machine._

The exterior of this instrument is represented at _fig. 200._, and
the interior at _fig. 201._ A B C is a shallow brass
box, having a solid piece as represented at A, to which the spring
D E F is firmly fixed by a nut at D. The other end of the
spring at F is pinned to the brass piece G H, to the part of which
at G is also fixed the iron racked plate I. A screw L serves as a stop
to keep this rack in its place. The teeth of the rack fit into those
of the pinion M, the axis of which passes through the centre of the
dial-plate, and carries an index which points out the weight. The brass
piece G H is merely a plate where it passes over the spring, and
the tail piece H, to which the weight is suspended, passes through an
opening in the side of the box.


_Of the Dynamometer._

This is an important instrument in mechanics, calculated to measure
the muscular strength exerted by men and animals. It consists
essentially of a spring steelyard, such as that we first described.
This is sometimes employed alone, and sometimes in combination with
various levers, which allow of the spring being made more delicate,
and consequently increase the extent of the divisions indicating the
weight.

The first instrument of this kind appears to have been invented by Mr.
Graham, but it was too bulky and inconvenient for use. M. le Roy made
one of a more simple construction. It consisted of a metal tube, about
a foot long, placed vertically upon a stand, and containing in the
inside a spiral spring, having above it a graduated rod terminating in
a globe. This rod entered the tube more or less in proportion to the
force applied to the globe, and the divisions indicated the quantity of
this force. Therefore, when a man pressed upon the globe with all his
strength, the divisions upon the rod showed the number of pounds weight
to which it was equal.

An instrument of this kind for determining the force of a blow struck
by a man with his fist was lately exhibited at the National Repository.
It was fixed to a wall, from which it projected horizontally. In
place of the globe there was a cushion to receive the blow, and as
the suddenness with which the spring returned rendered it impossible
to read the division upon the rod, another rod similarly divided was
forced in by the plate forming the basis of the cushion, and remained
stationary when the spring returned. The common spring steelyard,
however, which we first described, is in principle the same as M. le
Roy’s dynamometer, and is much more conveniently constructed for the
purpose we are considering. The ring at one end may be fixed to an
immovable object, and the hook at the other attached to a man, or to
an animal, and the extent to which the graduated rod is drawn out of
the cylinder shows at once the force which is applied. Though this is
perhaps the best, and certainly the most simple dynamometer, others
have been contrived, which are, however, but modifications of the
spring steelyard. One of these is represented at _fig. 202._ The
spiral spring acts in the manner before described, but its divisions
are increased in size, and therefore rendered more perceptible by means
of a rack fixed to the plate, acting against the spiral spring, the
teeth of which move a pinion upon which the arm I is fixed, pointing to
the graduated arc K.

Another dynamometer has been invented by Mr. Salmon; it is represented
at _fig. 203._ and is a combination of levers with the spring.
By means of these levers a much more delicate spring, and which is
therefore more sensible, may be employed than in the dynamometer last
described.

The manner in which these levers and spring act will be readily
understood by an inspection of the figure. Like the weighing machine
for carriages, the fulcrum of each lever is at one end, and the force
is diminished in passing to the spring, in the ratio of the length of
its arms. The spring moves a pinion by means of a rack, upon which
pinion a hand is placed, indicating by divisions upon a circular
dial-plate, the amount of the force employed.

The spring used in this machine is calculated to weigh only about
50 lbs. instead of about 5 cwt., as in the last described;
but by means of the levers which intervene between it and the force
applied, it will serve to estimate a force equal to 6 cwt., and
might obviously be made to go to a much greater extent, by varying the
ratio of the length of the arms of the levers.


ON COMPENSATION PENDULUMS.

(336.) It is said of Galileo that, when very young, he observed a
lamp suspended from the roof of a church at Pisa, swinging backwards
and forwards with a pendulous motion. This, if it had been remarked
at all by an uneducated mind, would, most probably, have been passed
by as a common occurrence, unworthy of the slightest notice; but to
the mind imbued with science no incident is insignificant; and a
circumstance apparently the most trivial, when subjected to the giant
force of expanded intellect, may become of immense importance to the
improvement and to the well-being of man. The fall of an apple, it is
said, suggested to Newton the theory of gravitation, and his powerful
mind speedily extended to all creation that great law which brings an
apple to the ground. The swinging of a lamp in a church at Pisa, viewed
by the piercing intellect of Galileo, gave rise to an instrument which
affords the most perfect measure of time, which serves to determine the
figure of the earth, and which is inseparably connected with all the
refinements of modern astronomy.

The properties of the pendulum, and the manner in which it serves
to measure time, have been fully explained in chapter xi.; and if
a substance could be found not susceptible of any change in its
dimensions from a change of temperature, nothing more would be
necessary, as the centre of oscillation would always remain at the
same distance from the point of suspension. As every known substance,
however, expands with heat, and contracts with cold, the length of the
pendulum will vary with every alteration of temperature, and thus the
time of its vibration will suffer a corresponding change. The effect
of a difference of temperature of 25°, or that which usually occurs
between winter and summer, would occasion a clock furnished with a
pendulum having an iron rod to gain or lose six seconds in twenty-four
hours.

It became, then, highly important to discover some means of
counteracting this variation to which the length of the pendulum was
liable, or, in other words, to devise a method by which the centre of
oscillation should, under every change of temperature, remain at the
same distance from the point of suspension: happily, the difference in
the rate of expansion of different metals presented a ready means of
effecting this.

Graham, in the year 1715, made several experiments to ascertain the
relative expansions of various metals, with a view of availing himself
of the difference of the expansions of two or more of them when opposed
to each other, to construct a compensating pendulum. But the difference
he found was so small, that he gave up all hope of being able to
accomplish his object in that way. Knowing, however, that mercury was
much more affected by a given change of temperature than any other
substance, he saw that if the mercury could be made to ascend while
the rod of the pendulum became longer, and _vice versâ_, the centre of
oscillation might always be kept at the same distance from the point
of suspension. This idea happily gave birth to the mercurial pendulum,
which is now in very general use.

[Illustration: _Captn. Kater, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

In the mean time, Graham’s suggestion excited the ingenuity of
Harrison, originally a carpenter at Barton in Lincolnshire, who, in
1726, produced a pendulum formed of parallel brass and steel rods,
known by the name of the gridiron pendulum.

In the mercurial pendulum, the bob or weight is the material affording
the compensation; but in the gridiron pendulum the object is attained
by the greater expansion of the brass rods, which raise the bob upwards
towards the point of suspension as much as the steel rods elongate
downwards.

In the present article, we shall describe such compensation pendulums
as appear to us likely to answer best in practice; and we trust we
shall be able to simplify the subject so as to render a knowledge
of mathematics in the construction of this important instrument
unnecessary.

The following table contains the linear expansion of various substances
in parts of their length, occasioned by a change of temperature
amounting to one degree. We have taken the liberty of extracting
it from a very valuable paper by F. Bailey, Esq., on the mercurial
compensation pendulum, published in the Memoirs of the Astronomical
Society of London for 1824.


TABLE I.

_Linear Expansion of various Substances for One Degree of Fahrenheit’s
Thermometer._

  +----------------------+-------------+-----------------------+
  |     Substances.      | Expansions. |        Authors.       |
  +----------------------+-------------+-----------------------+
  |White Deal,         { | ·0000022685 |  Captain Kater.       |
  |                    { | ·0000028444 |  Dr. Struve.          |
  |English Flint Glass,  | ·0000047887 |  Dulong and Petit.    |
  |Iron (cast),        { | ·0000061700 |  General Roy.         |
  |                    { | ·0000065668 |  Dulong and Petit.    |
  |Iron (wire),          | ·0000068613 |  Lavoisier and L.     |
  |Iron (bar),           | ·0000069844 |  Hasslar.             |
  |Steel (rod),          | ·0000063596 |  General Roy.         |
  |                      |             | {Commissioners of     |
  |Brass,                | ·0000104400 | {Weights and Measures |
  |                      |             | {--mean of several    |
  |                      |             | {experiments.         |
  |Lead,                 | ·0000159259 |  Smeaton.             |
  |Zinc,                 | ·0000163426 |  Ditto.               |
  |Zinc (hammered),      | ·0000172685 |  Ditto.               |
  |Mercury _in bulk_,    | ·00010010   |  Dulong and Petit.    |
  +----------------------+-------------+-----------------------+

From this table it is easy to determine the length of a rod of any
substance the expansion of which shall be equal to that of a rod of
given length of any other substance.

The lengths of such rods will be inversely proportionate to their
expansions. If, therefore, we divide the lesser expansion by the
greater (supposing the rod the length of which is given to be made of
the lesser expansible material), and multiply the given length by this
quotient, we shall have the required length of a rod, the expansion
of which will be equal to that of the rod given. For example:--The
expansion of a rod of steel being, from the above table, ·0000063596,
and that of brass, ·0000104400; if it were required to determine the
length of a rod of brass which should expand as much as a rod of steel
of 39 inches in length, we have ·0000063596/·0000104400 = ·6091, which,
multiplied by 39, gives 23·75 inches for the length of brass required.

We shall here, in order to facilitate calculation, give the ratio of
the lengths of such substances as may be employed in the construction
of compensation pendulums.


TABLE II.

  +---------------------------------------------------+
  | Steel rod and brass compensation, as 1:     ·6091 |
  | Iron wire rod and lead compensation,        ·4308 |
  | Steel rod and lead compensation,            ·3993 |
  | Iron wire rod and zinc compensation,        ·3973 |
  | Steel rod and zinc compensation,            ·3682 |
  | Glass rod and lead compensation,            ·3007 |
  | Glass rod and zinc compensation,            ·2773 |
  | Deal rod and lead compensation,             ·1427 |
  | Deal rod and zinc compensation,             ·1313 |
  | Steel rod and mercury in a steel cylinder,  ·0728 |
  | Steel rod and mercury in a glass cylinder,  ·0703 |
  | Glass rod and mercury in a glass cylinder,  ·0529 |
  +---------------------------------------------------+

It is evident that in this table the decimals express the length of a
rod of the compensating material, the expansion of which is equal to
that of a pendulum rod whose length is unity.

As we are not aware of the existence of any work which contains
instructions that might enable an artist or an amateur to make a
compensation pendulum, we shall endeavour to give such detailed
information as may free the subject from every difficulty.

The pendulum of a clock is generally suspended by a spring, fixed
to its upper extremity, and passing through a slit made in a piece
which is called the cock of the pendulum. The point of suspension is,
therefore, that part of the spring which meets the lower surface of the
cock. Now the distance of the centre of oscillation of the pendulum
from this point may be varied in two ways; the one by drawing up the
spring through this slit, and the other by raising the bob of the
pendulum. Either of these methods may be practised in the compensation
pendulum, but the former is subject to objections from which the latter
is exempt.

Suppose it were required to compensate a pendulum of 39 inches in
length, of steel, by means of the expansion of a brass rod. Here,
referring to _fig. 204._, we have S C 39 inches (which is
to remain constant) of steel; the pendulum spring, passing through
the cock at S, is attached to another rod of steel, which is fixed to
the cross piece R A at A. The other end of the cross piece at R
is fastened to a brass rod, the lower extremity of which is fixed to
the cock of the pendulum at B. Now the brass rod B R must expand
upwards, as much as the steel rod A C expands downwards; and the
length of the brass must be such as to effect this, leaving 39 inches
of the steel rod below the cock of the pendulum.

Let us first try 80 inches of steel. Multiplying this by ·6091, we have
48·73 inches for the length of brass, which compensates 80 inches of
steel. But as 48·73 inches of the steel, equal in length to the brass,
would in this case be above the cock of the pendulum, it would leave
only 31·27 inches below it, instead of 39 inches.

Let us now try 100 inches of steel. This, multiplied as before by
·6091, gives 60·91 inches, according to the expansions which we have
used, for the length of the brass rod, and leaves 39·09 inches below
the cock of the pendulum, which is sufficiently near for our present
purpose.

From what has been said we may perceive that the total length of the
material of which the pendulum rod is composed must be always equal to
the length of the pendulum added to the length of the compensation.

In this instance we have effected our object, by drawing the
pendulum-spring through the slit; but we will now show how the
same thing may be done by moving the bob of the pendulum. At
_fig. 205._, let S C, as before, be equal to 39 inches. Let
the steel rod S D turn off at right angles at D, and let a rod
of brass B R, of 61 inches in length, ascend perpendicularly from
this cross piece to R. To the upper part of the brass rod fix another
cross piece R A, and from the extremity A let a steel rod descend
to E, bending it as in the figure till it reaches C. Now the total
length of the pieces of steel expanding downwards is equal to S D,
D F, and F C (amounting together to 39 inches), to which must
be added a length of steel equal to that of the brass rod B R, (61
inches), making together 100 inches of steel as before, the expansion
of which downwards is compensated by that of the brass rod, of 61
inches in length, expanding upwards.

This form, however, is evidently inconvenient, from the great length
of brass and steel which is carried above the cock of the pendulum;
but it is the same thing whether the brass and steel be each in one
piece, or divided into several, provided the pieces of steel be all
so arranged as to expand downwards, and those of brass upwards. Thus,
at _fig. 206._, the portions of steel expanding downwards are
together equal, as before, to 100 inches, and the two brass pieces
expanding upwards are together equal to 61 inches. So that, in fact,
the two last forms of compensation which we have described differ in
no respect from each other in principle, but only in the arrangement
of the materials. The last is the half of the gridiron pendulum, the
remaining bars being merely duplicates of those we have described, and
serving no other purpose but to form a secure frame-work.


_Harrison’s Gridiron Pendulum._

After what has been said, little more is necessary than to give a
representation of this pendulum. This is done at _fig. 207._, in
which the darker lines represent the steel rods, and the lighter those
of brass. The central rod is fixed at its lower extremity to the middle
of the third cross piece from the bottom, and passes freely through
holes in the cross pieces which are above, whilst the other rods are
secured near their extremities to the cross pieces by pins passing
through them. In order to render the whole more secure, the bars pass
freely through holes made in two other cross pieces, the extremities of
which are fixed to the exterior steel wires. As different kinds of the
same metal vary in their rate of expansion, the pendulum when finished
may be found upon trial to be not duly compensated. In this case one or
more of the cross pieces is shifted higher or lower upon the bars, and
secured by pins passed through fresh holes.


_Troughton’s Tubular Pendulum._

This is an admirable modification of Harrison’s gridiron pendulum.
It is represented at _fig. 208._, where it may be seen that it
has the appearance of a simple pendulum, as the whole compensation is
concealed within a tube six tenths of an inch in diameter.

A steel wire, about one tenth of an inch in diameter, is fixed in the
usual manner to the spring by which the pendulum is suspended. This
wire passes to the bottom of an interior brass tube, in the centre of
which it is firmly screwed. The top of this tube is closed, the steel
rod passing freely through a hole in the centre. Into the top of this
interior tube two steel wires, of one tenth of an inch in diameter,
are screwed into holes made in that diameter, which is at right angles
to the motion of the pendulum. These wires pass down the tube without
touching either it or the central rod, through holes made in the piece
which closes the bottom of the interior tube. The lower extremities of
these wires, which project a little beyond the inner tube, are securely
fixed in a piece which closes the bottom of an exterior brass tube,
which is of such a diameter as just to allow the interior tube to pass
freely through it, and of a sufficient length to extend a little above
it. The top of the exterior tube is closed like that of the interior,
having also a hole in its centre, to allow the first steel rod to pass
freely through it. Into the top of the exterior tube, in that diameter
which coincides with the motion of the pendulum, a second pair of
steel wires of the same diameter as the former are screwed, their
distance from the central rod being equal to the distance of each from
the first pair. They consequently pass down within the interior tube,
and through holes made in the pieces closing the lower ends of both the
interior and exterior tubes. The lower ends of these wires are fastened
to a short cylindrical piece of brass of the same diameter as the
exterior tube, to which the bob is suspended by its centre.

[Illustration: _Captn. Kater, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

_Fig. 209._ is a full sized section of the rod; the three
concentric circles represent the two tubes, and the rectangular
position of the two pair of wires round the middle one is shown by the
five small circles.

_Fig. 210._ is the part which closes the upper end of the interior
tube. The two small circles are the two wires which proceed from it,
and the three large circles show the holes through which the middle
wire and the other pair of wires pass.

_Fig. 211._ is the bottom of the interior tube. The small circle
in the centre is where the central rod is fastened to it, the others
the holes for the other four wires to pass through.

_Fig. 212._ is the part which closes the top of the external tube.
In the large circle in the centre a small brass tube is fixed, which
serves as a covering for the upper part of the middle wire, and the two
small circles are to receive the wires of the last expansion.

_Fig. 213._ represents the bottom of the exterior tube, in which
the small circles show the places where the wires of the second
expansion are fastened, and the larger ones the holes for the other
pair of wires to pass through.

_Fig. 214._ is a cylindrical piece of brass, showing the manner in
which the lower ends of the wires of the last expansion are fastened
to it, and the hole in the middle is that by which it is pinned to
the centre of the bob. The upper ends of the two pair of wires are,
as we have observed, fastened by screwing them into the pieces which
stop up the ends of the tubes, but at the lower ends they are all
fixed as represented in _fig. 214._ The pieces represented by
_figs. 213._ and _214._ have each a jointed motion, by means
of which the fellow wires of each pair would be equally stretched,
although they were not exactly of the same length.

The action of this pendulum is evidently the same as that of the
gridiron pendulum, as we have three lengths of steel expanding
downwards, and two of brass expanding upwards. The weight of the
pendulum has a tendency to straighten the steel rods, and the tubular
form of the brass compensation effectually precludes the fear of its
bending; an advantage not possessed by the gridiron pendulum, in which
brass rods are employed.

Mr. Troughton, to the account he has given of this pendulum in
Nicholson’s Journal, for December, 1804, has added the lengths of
the different parts of which it was composed, and the expansions of
brass and steel from which these lengths were computed. The length of
the interior tube was 31·9 inches, and that of the exterior one 32·8
inches, to which must be added 0·4, the quantity by which in this
pendulum the centre of oscillation is higher than the centre of the
bob. These are all of brass. The parts which are of steel are,--the
middle wire, which, including 0·6, the length of the suspension spring,
is 39·3 inches. The first pair of wires 32·5 inches; and the second
pair, 33·2 inches. The expansions used were, for brass ·00001666,
and for steel ·00000661, in parts of their length for one degree of
temperature.


_Benzenberg’s Pendulum._

This pendulum is mentioned in Nicholson’s Journal for April, 1804, and
is taken from Voigt’s Magazin für den Neuesten Zustande der Naturkunde,
vol. iv. p. 787. The compensation appears to have been
effected by a single rod of lead in the centre, of about half an inch
thick; the descending rods were made of the best thick iron wire.

As this pendulum deserves attention from the ease with which it may
be made, and as others which have since been produced resemble it in
principle, we have given a representation of it at _fig. 215._,
where A B C D are two rods of iron wire riveted into the
cross pieces A C B D. E F is a rod of lead pinned
to the middle of the piece B D, and also at its upper extremity
to the cross piece G H, into which the second pair of iron wires
are fixed, which pass downwards freely through holes made in the cross
piece B D. The lower extremities of these last iron wires are
fastened into the piece K L, which carries the bob of the pendulum.

To determine the length of lead necessary for the compensation, we must
recollect, as before, that the distance from the point of suspension
to the centre of the bob (speaking always of a pendulum intended to
vibrate seconds) must be 39 inches. Let us suppose the total length
of the iron wire to be 60 inches; then, from the table which we have
given, we have ·4308 for the length of a rod of lead, the expansion
of which is equivalent to that of an iron rod whose length is unity.
Multiplying 60 inches by ·4308, we have 25·84 inches of lead, which
would compensate 60 inches of iron; but this, taken from 60 inches,
leaves only 34·16 instead of 39 inches. Trying again, in like manner,
68·5 inches of iron, we find 29·5 inches of lead for the length,
affording an equivalent compensation, and which, taken from 68·5
inches, leaves 39 inches.

The length of the rod of lead then required as a compensation in this
pendulum is about 29-1/2 inches.

The writer of this article would suggest another form for this
pendulum, which has the advantage of greater simplicity of construction.

S A, _fig. 216._, is a rod of iron wire, to which the
pendulum spring is attached. Upon this passes a cylindrical tube of
lead, 29-1/2 inches long, which is either pinned at its lower extremity
to the end of the iron rod S A, or rests upon a nut firmly screwed
upon the extremity of this rod.

A tube of sheet iron passes over the tube of lead, and is furnished at
top with a flanche, by which it is supported upon the leaden tube; or
it may be fastened to the top of this tube in any manner that may be
thought convenient.

The bob of the pendulum may be either passed upon the iron tube
(continued to a sufficient length) and secured by a pin passing through
the centre of the bob, or the iron tube may be terminated by an iron
wire serving the same purpose.

Here we have evidently the same expansions upwards and downwards as in
the gridiron form, given to this pendulum by Mr. Benzenberg, joined to
the compactness of Troughton’s tubular pendulum.


_Ward’s Compensation Pendulum._

In the year 1806, Mr. Henry Ward, of Blandford in Dorsetshire, received
the silver medal of the Society of Arts for the compensation pendulum
which we are about to describe.

_Fig. 217._ is a side view of the pendulum rod when together.
H H and I I are two flat rods of iron about an eighth of
an inch thick. K K is a bar of zinc placed between them, and is
nearly a quarter of an inch thick. The corners of the iron bars are
bevelled off, which gives them a much lighter appearance. These bars
are kept together by means of three screws, O O O, which
pass through oblong holes in the bars H H and K K, and screw
into the rod I I. The bar H H is fastened to the bar of zinc
K K, by the screw _m_, which is called the adjusting screw. This
screw is tapped into H H, and passes just through K K; but
that part of the screw which passes K K has its threads turned
off. The iron bar I I has a shoulder at its upper end, and rests
on the top of the zinc bar K K and is wholly supported by it.
There are several holes for the screw _m_, in order to adjust the
compensation.

The action of this pendulum is similar to that last described, the
zinc expanding upwards as much as the iron rods expand downwards, and
consequently the instance from the point of suspension to the centre
of oscillation remains the same.

[Illustration: _Captn. Kater, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

Mr. Ward states that the expansion of the zinc he used (hammered zinc)
was greater than that given in the tables. He found that the true
length of the zinc bar should be about 23 inches; our computation would
make it nearly 26.


_The Compensation Tube of Julien le Roy._

We mention this merely to state that it is similar in principal to the
apparatus represented at _fig. 204._, with merely this difference,
that, instead of the steel rod being fixed to a cross piece proceeding
from the brass bar B R, it is attached to a cap fixed upon a brass
tube (through which it passes) of the same length as that of the brass
rod B R. Cassini spoke well of this pendulum, and it was used in
the observatory of Cluny about the year 1748.


_Deparcieux’s Compensation._

This was contrived in the same year as that invented by Julien le Roy.
It is represented at _fig. 218._, where A B D F
is a steel bar, the ends of which are to be fixed to the lower
sides of pieces forming a part of the cock of the pendulum.
G E I H is of brass, and stands with its extremities
resting on the horizontal part B D of the steel frame. The upper
part E I of the brass frame passes above the cock of the pendulum,
and admits the tapped wire K, to which the pendulum spring is fixed
through a squared hole in the middle. A nut upon this tapped wire gives
the adjustment for time. The spring passes through the slit in the cock
in the usual manner.

It may be easily perceived that this pendulum is in principle the
same as that of Le Roy; the expansion of the total length of steel
A B S C downwards being compensated by the equivalent
expansion of the brass bar G E upwards. It is, however, preferable
to Le Roy’s, because the compensation is contained in the clock case.

Deparcieux had previously published, in the year 1739, an improvement
of an imperfectly compensating pendulum, proposed in the year 1733 by
Regnauld, a clockmaker of Chalons. In this pendulum Deparcieux employed
a lever with unequal arms to increase the effect of the expansion of
the brass rod, which was too short.

We may here remark, that all fixed compensations are liable to the same
objection, namely, that of not moving with the pendulum, and therefore
not taking precisely the same temperature.


_Captain Kater’s Compensation Pendulum._

In Nicholson’s Journal, for July, 1808, is the description of a
compensation pendulum by the writer of this article. In this pendulum
the rod is of white deal, three quarters of an inch wide, and a quarter
of an inch thick. It was placed in an oven, and suffered to remain
there for a long time until it became a little charred. The ends were
then soaked in melted sealing-wax; and the rod, being cleaned, was
coated several times with copal varnish. To the lower extremity of the
rod a cap of brass was firmly fixed, from which a strong steel screw
proceeded for the purpose of regulating the pendulum for time in the
usual manner.

A square tube of zinc was cast, seven inches long and three quarters
of an inch square; the internal dimensions being four tenths of an
inch. The lower part of the pendulum rod was cut away on the two sides,
so as to slide with perfect freedom within the tube of zinc. To the
bottom of this zinc tube a piece of brass a quarter of an inch thick
was soldered, in which a circular hole was made nearly four tenths of
an inch in diameter, having a screw on the inside. A cylinder of zinc,
furnished with a corresponding screw on its surface, fitted into this
aperture, and a thin plate of brass screwed upon the cylinder, served
as a clamp to prevent any shake after the length of zinc necessary for
compensation should have been determined. A hole was made through the
axis of the cylinder, through which passed the steel screw terminating
the pendulum rod.

An opening was made through the bob of the pendulum, extending to its
centre, to admit the square tube of zinc which was fixed at its upper
extremity to the centre of the bob. The pendulum rod passed through the
bob in the usual manner, and the whole was supported by a nut on the
steel screw at the extremity.

In this form the compensation acts immediately upon the centre of the
bob, elevating it along the rod as much as the rod elongates downwards:
the method of calculating the length of the required compensation is
precisely the same as that we have before given.

Assuming the length of the deal rod to be 43 inches, and multiplying
this by ·1313 from Table II., we have 5·64 inches for the length of
the zinc necessary to counteract the expansion of the deal. The length
of the steel screw between the termination of the pendulum rod and the
nut was two inches, and that of the suspension spring one inch. Now,
3 inches of steel multiplied by ·3682 would give 1·10 inches for the
length of zinc which would compensate the steel, and, adding this to
5·64 inches, we have 6·74 inches for the whole length of zinc required.

In this pendulum, the length of the compensating part may be varied by
means of the zinc cylinder furnished with a screw for that purpose.
The bob of this pendulum and its compensation are represented at
_fig. 219._

It has been objected to the use of wooden pendulum rods, that it
is difficult, if not impossible, to secure them from the action of
moisture, which would at once be fatal to their correct performance.
The pendulum now before us has, however, been going with but little
intermission since it was first constructed: it is attached to a
sidereal clock, not of a superior description, and exposed to very
considerable variations of moisture and dryness; yet the change in its
rate has been so very trifling as to authorize the belief that moisture
has little or no effect upon a wooden rod prepared in the manner we
have described. Its rate, under different temperatures, shows that it
is over-compensated; the length of the zinc remaining, as stated in
Nicholson’s Journal 7·42 inches, instead of which it appears, by our
present compensation, that it should be 6·78 inches.


_Reid’s Compensation Pendulum._

Mr. Adam Reid of Woolwich presented to the Society of Arts, in 1809, a
compensation pendulum, for which he was rewarded with fifteen guineas.
This pendulum is the same in principle with that last described;
the rod, however, is of steel instead of wood, and the compensation
possesses no means of adjustment. This pendulum is represented at
_fig. 220._, where S B is the steel rod, a little thicker
where it enters the bob C, and of a lozenge shape to prevent the bob
turning, but above and below it is cylindrical.

A tube of zinc D passes to the centre of the bob from below, and the
bob is supported upon it by a piece which crosses its centre, and which
meets the upper end of the tube.

The rod being passed through the bob and zinc tube, a nut is applied
upon a screw at the lower extremity of the rod in the usual manner. If
the compensation should be too much, the zinc tube is to be shortened
until it is correct.

The length of the zinc tube will be the same in this pendulum as in
that of Mr. Ward--about 23 inches, if his experiments are to be relied
upon.

The objection to this pendulum appears to be its great length, which
amounts to 62 inches. We conceive it would be preferable to place the
zinc above the bob, as in the modification which we have suggested of
Benzenberg’s pendulum.


_Ellicott’s Pendulum._

It appears that the idea of combining the expansions of different
metals with a lever, so as to form a compensation pendulum,
originated with Mr. Graham; for Mr. Short, in the Philosophical
Transactions for 1752, states that he was informed by Mr. Shelton, that
Mr. Graham, in the year 1737, made a pendulum, consisting of three
bars, one of steel between two of brass; and that the steel bar acted
upon a lever so as to raise the pendulum when lengthened by heat, and
to let it down when shortened by cold.

[Illustration: _Captn. Kater, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

This pendulum, however, was found upon trial to move by jerks, and was
therefore laid aside by the inventor to make way for the mercurial
pendulum.

Mr. Short also says that Mr. Fotheringham, a quaker of Lincolnshire,
caused a pendulum to be made, in the year 1738 or 1739, consisting of
two bars, one of brass and the other of steel, fastened together by
screws with levers to raise or let down the bob, and that these levers
were placed above the bob.

Mr. John Ellicott of London had made very, accurate experiments on the
relative expansions of seven different metals, which, however, will be
found to differ more or less from the results of the experiments of
others. It is not, however, from this to be concluded that Ellicott’s
determinations were erroneous; for the expansion of a metal will suffer
considerable change even by the processes to which it is necessarily
subjected in the construction of a pendulum. It is therefore desirable,
whenever a compensation pendulum is to be made, that the expansions
of the materials employed should be determined after the processes of
drilling, filing, and hammering have been gone through.

It had been objected to Harrison’s gridiron pendulum, that the
adjustments of the rods was inconvenient, and that the expansion of the
bob supported at its lower edge would, unless taken into the account,
vitiate the compensation. These considerations, it is supposed, gave
rise to Ellicott’s pendulum, which is nearly similar to those we have
just mentioned.

Ellicott’s pendulum is thus constructed:--A bar of brass and a bar of
iron are firmly fixed together at their upper ends, the bar of brass
lying upon the bar of iron, which is the rod of the pendulum. These
bars are held near each other by screws passing through oblong holes in
the brass, and tapped into the iron, and thus the brass is allowed to
expand or contract freely upon the iron with any change of temperature.
The brass bar passes to the centre of the bob of the pendulum, a little
above and below which the iron is left broader for the purpose of
attaching the levers to it, and the iron is made of a sufficient length
to pass quite through the bob of the pendulum.

The pivots of two strong steel levers turn in two holes drilled in
the broad part of the iron bar. The short arms of these levers are in
contact with the lower extremity of the brass bar, and their longer
arms support the bob of the pendulum by meeting the heads of two
screws which pass horizontally from each side of the bob towards its
centre. By advancing these screws towards the centre of the bob, the
longer arms of the lever are shortened, and thus the compensation may
be readily adjusted. At the lower end of the iron rod, under the bob,
a strong double spring is fixed, to support the greater part of the
weight of the bob by its pressure upwards against two points at equal
distances from the pendulum rod. Mr. Ellicott gave a description of
this pendulum to the Royal Society in 1752, but he says the thought was
executed in 1738. As this pendulum is very seldom met with, we think it
unnecessary to give a representation of it.


_Compensation by means of a Compound Bar of Steel and Brass._

Several compensations for pendulums have been proposed, by means of
a compound bar formed of steel and brass soldered together. In a
bar of this description, the brass expanding more than the steel,
the bar becomes curved by a change of temperature, the brass side
becoming convex and the steel concave with heat. Now, if a bar of
this description have its ends resting on supports on each side the
cock of the pendulum, the bar passing above the cock with the brass
uppermost, if the pendulum spring be attached to the middle of the bar,
and it pass in the usual manner through the slit of the cock, it is
evident that, by an increase of temperature, the bar will become curved
upwards, and the pendulum spring be drawn upwards through the slit, and
thus the elongation of the pendulum downwards will be compensated. The
compensation may be adjusted by varying the distance of the points of
support from the middle of the bar.

Such was one of the modes of compensation proposed by Nicholson. Others
of the same description (that is, with compound bars) have been brought
before the public by Mr. Thomas Doughty and Mr. David Ritchie; but as
they are supposed to be liable to many practical objections, we do not
think it requisite to describe them more particularly.

There is, however, a mode of compensation by means of a compound bar,
described by M. Biot in the first volume of his Traité de Physique,
which appears to possess considerable merit, of which he mentions
having first witnessed the successful employment by the inventor, a
clockmaker named Martin. At _fig. 221._, S C, is the rod of
the pendulum, made, in the usual manner, of iron or steel; this rod
passes through the middle of a compound bar of brass and steel (the
brass being undermost), which should be furnished with a short tube and
screws, by means of which, or by passing a pin through the tube and
rod, it may be securely fixed at any part of the pendulum rod.

Two small equal weights W W slide along the compound bar, and,
when their proper position has been determined, may be securely clamped.

The manner in which this compensation acts is thus:--Suppose the
temperature to increase, the brass expanding more than the steel, the
bar becomes curved, and its extremities carrying the weights W and W
are elevated, and thus the place of the centre of oscillation is made
to approach the point of suspension as much, when the compensation is
properly adjusted, as it had receded from it by the elongation of the
pendulum rod.

There are three methods of adjusting this compensation: the first, by
increasing or diminishing the weights W and W; the second, by varying
the distance of the weights W and W from the middle of the bar; and
the third, by varying the distance of the bar from the bob of the
pendulum, taking care not to pass the middle of the rod. The effect of
the compensation is greater as the weights W and W are greater or more
distant from the centre of the bar, and also as the bar is nearer to
the bob of the pendulum.

M. Biot says that he and M. Matthieu employed a pendulum of this kind
for a long time in making astronomical observations in which they were
desirous of attaining an extreme degree of precision, and that they
found its rate to be always perfectly regular.

In all the pendulums which we have described, the bob is supposed
to be fixed to the rod by a pin passing through its centre, and the
adjustment for time is to be made by means of a small weight sliding
upon the rod.


_Of the Mercurial Pendulum._

We have been guided, in our arrangement of the pendulums which we have
described, by the similarity in the mode of compensation employed; and
we have now to treat of that method of compensation which is effected
by the expansion of the material of which the bob itself of the
pendulum is composed.

On this subject, as we have before observed, an admirable paper, from
the pen of Mr. Francis Baily, may be found in the Memoirs of the
Astronomical Society of London, which leaves nothing to be desired
by the mathematical reader. But as our object is to simplify, and
to render our subjects as popular as may be, we must endeavour to
substitute for the perfect accuracy which Mr. Baily’s paper presents,
such rules as may be found not only readily intelligible, but
practically applicable, within the limits of those inevitable errors
which arise from a want of knowledge of the exact expansion of the
materials employed.

At _fig. 222._, let S B represent the rod of a pendulum, and
F C B a metallic tube or cylinder, supported by a nut
at the extremity of the pendulum rod, in the usual manner, and having
a greater expansibility than that of the rod. Now C, the centre of
gravity, supposing the rod to be without weight, will be in the middle
of the cylinder; and if C B, or half the cylinder, be of such
a length as to expand upwards as much as the pendulum rod S B
expands downwards, it is evident that the centre of gravity C will
remain, under any change of temperature, at the same distance from the
point of suspension S. M. Biot imagined that, in effecting this, a
compensation sufficiently accurate would be obtained; but Mr. Baily has
shown that this is by no means the fact.

Let us suppose the place of the centre of oscillation to be at O,
about three or four tenths of an inch, in a pendulum of the usual
construction, below the centre of gravity. Now, the object of the
compensation is to preserve the distance from S to O invariable, and
not the distance from S to C.

The distance of the centre of oscillation varies with the length of the
cylinder F B, and hence suffers an alteration in its distance from
the point of suspension by the elongation of the cylinder, although
the distance of the centre of gravity C from the point of suspension
remains unaltered.

We shall endeavour to render this perfectly familiar. Suppose a
metallic cylinder, 6 inches long, to be suspended by a thread 36 inches
long, thus forming a pendulum in which the distance of the centre
of gravity from the point of suspension is 39 inches: the centre of
oscillation in such a pendulum will be nearly one tenth of an inch
below the centre of gravity. Now let us imagine cylindrical portions of
equal lengths to be added to each end of the cylinder, until it reaches
the point of suspension; we shall then have a cylinder of 78 inches in
length, the centre of gravity of which will still be at the distance of
39 inches from the point of suspension. But it is well known that the
centre of oscillation of such a cylinder is at the distance of about
two thirds of its length from the point of suspension. The centre of
oscillation, therefore, has been removed, by the elongation of the
cylinder, about 13 inches below the centre of gravity, whilst the
centre of gravity has remained stationary.

Now the same thing as that which we have just described takes place,
though in a very minor degree, with our former cylinder, employed as a
compensating bob to a pendulum. The rod expands downwards, the centre
of gravity remains at the same distance from the point of suspension,
and the cylinder elongates both above and below this point; the
consequence of which is, that though the centre of gravity has remained
stationary, the distance of the centre of oscillation from the point
of suspension has increased. It is, therefore, evident that the length
of the compensation must be such as to carry the centre of gravity
a little nearer to the point of suspension than it was before the
expansion took place; by which means the centre of oscillation will be
restored to its former distance from the point of suspension.

Let us suppose the expansions to have taken place, and that the
centre of gravity, remaining at the same distance from the point of
suspension, the centre of oscillation is removed to a greater distance,
as we have before explained. It is well known that the product obtained
by multiplying the distance from the point of suspension to the centre
of gravity, by the distance from the centre of gravity to the centre
of oscillation, is a constant quantity; if, therefore, the distance
from the centre of gravity to the point of suspension be lessened, the
distance from the centre of gravity to the centre of oscillation will
be proportionally, though not equally, increased, and the centre of
oscillation will, therefore, be elevated. We see, then, if we elevate
the centre of gravity precisely the requisite quantity, by employing
a sufficient length of the compensating material, that although the
distance from the centre of gravity to the point of suspension is
lessened, yet the distance from the point of suspension to the centre
of oscillation will suffer no change.

The following rule for finding the length of the compensating material
in a pendulum of the kind we have been considering will be found
sufficiently accurate for all practical purposes:--

_Find in the manner before directed the length of the compensating
material, the expansion of which will be equal to that of the rod of
the pendulum. Double this length, and increase the product by its
one-tenth part, which will give the total length required._ We shall
give examples of this as we proceed.


_Graham’s Mercurial Pendulum._

It was in the year 1721 that Graham first put up a pendulum of this
description, and subjected it to the test of experiment; but it appears
to have been afterwards set aside to make way for Harrison’s gridiron
pendulum, or for others of a similar description. For some years past,
however, its merits have been more generally known, and it is not
surprising that it should be considered as preferable to others, both
from the simplicity of its construction, and the perfect ease with
which the compensation may be adjusted.

We have already alluded to Mr. Baily’s very able paper on this
pendulum, and we shall take the liberty of extracting from it the
following description:--

At _fig. 223._ is a drawing of the mercurial pendulum, as
constructed in the manner proposed by Mr. Baily.

“The rod S F is made of steel, and perfectly straight; its form
may be either cylindrical, of about a quarter of an inch in diameter,
or a flat bar, three eighths of an inch wide, and one eighth of an inch
thick: its length from S to F, that is, from the bottom of the spring
to the bottom of the rod at F, should be 34 inches. The lower part of
this rod, which passes through the top of the stirrup, and about half
an inch above and below the same, must be formed into a _coarse_ and
_deep_ screw, about two tenths of an inch in diameter, and having about
thirty turns in an inch. A steel nut with a milled head must be placed
at the end of the rod, in order to support the stirrup; and a similar
nut must also be placed on the rod _above_ the head of the stirrup,
in order to screw firmly down on the same, and thus secure it in its
position, after it has been adjusted _nearly_ to the required rate.
These nuts are represented at B and C. A small slit is cut in the rod,
where it passes through the head of the stirrup, through which a steel
pin E is screwed, in order to keep the stirrup from turning round on
the rod. The stirrup itself is also made of steel, and the side pieces
should be of the same form as the rod, in order that they may readily
acquire the same temperature. The top of the stirrup consists of a flat
piece of steel, shaped as in the drawing, somewhat more than three
eighths of an inch thick. Through the middle of the top (which at this
part is about one inch deep) a hole must be drilled sufficiently large
to enable the screw of the rod to pass _freely_, but without _shaking_.
The inside height of the stirrup from A to D may be 8-1/2 inches, and
the inside width between the bars about three inches. The bottom piece
should be about three eighths of an inch thick, and hollowed out nearly
a quarter of an inch deep, so as to admit the glass cylinder freely.
This glass cylinder should have a brass or iron cover G, which should
fit the mouth of it freely, with a shoulder projecting on each side, by
means of which it should be screwed to the side bars of the stirrup,
and thus be secured always in the same position. This cap should not
_press_ on the glass cylinder, so as to prevent its expansion. The
measures above given may require a slight modification, according to
the weight of the mercury employed, and the magnitude of the cylinder:
the final adjustment, however, may be safely left to the artist. Some
persons have recommended that a circular piece of thick plate glass
should float on the mercury, in order to preserve its surface uniformly
level.[7] The part at the bottom marked H is a piece of brass fastened
with screws to the front of the bottom of the stirrup, through a small
hole, in which a steel wire or common needle is passed, in order to
indicate (on a scale affixed to the case of the clock) the arc of
vibration. This wire should merely rest in the hole, whereby it may
be easily removed when it is required to detach the pendulum from the
clock, in order that the stirrup might then stand securely on its base.
One of the screw holes should be rather larger than the body of the
screw, in order to admit of a small adjustment, in case the steel wire
should not stand exactly perpendicular to the axis of motion. The scale
should be divided into _degrees_, and not _inches_, observing that with
a radius of 44 inches (the estimated distance from the bend of the
spring to the end of the steel wire) the length of each degree on the
scale must be 0·768 inch.”

[7] The variation produced in the height of the column of mercury
(supposed to be 6-1/2 inches high) by an alteration of ± 16° in the
temperature will be only ± 1/100 of an inch, or in other words, 1/100
of an inch will be the total variation from its _mean_ state, by an
alteration of 32° in the temperature. It is therefore probable that, in
most cases of moderate alteration in the temperature, the _centre_ only
of the column of mercury is subject to elevation and depression, whilst
the exterior parts remain attached to the sides of the glass vessel. It
was with a view to obviate this inconvenience that Henry Browne, Esq.
of Portland Place (I believe) first suggested the piece of floating
glass.

In order to determine the length of the mercurial column necessary
to form the compensation for this pendulum, we must proceed in the
following manner:--

Let us suppose the length of the steel rod and stirrup together to be
42 inches. The absolute expansion of the mercury is ·00010010; but it
is not the absolute expansion, but the vertical expansion in a glass
cylinder, which is required, and this will evidently be influenced by
the expansion of the base of this cylinder. It is easily demonstrable
that, if we multiply the linear expansion of any substance (always
supposed to be a very small part of its length) by 3, we may in all
cases take the result for the cubical or absolute expansion of such
substance. In like manner, if we multiply the linear expansion by 2, we
shall have the superficial expansion.

If we want the apparent expansion of mercury, the absolute or cubical
expansion of the glass vessel must be deducted from the absolute
expansion of the mercury, which will leave its excess or apparent
expansion. In like manner, deducting the superficial expansion of glass
from the absolute expansion of mercury, we shall have its relative
vertical expansion. Now, taking the rate of expansion of glass to be
·00000479, and multiplying it by 2, the relative vertical expansion
of the mercury in the glass cylinder will be ·00010010 - ·00000958 =
·00009052.

The expansion of a steel rod, according to our table, is ·0000063596;
which, divided by ·00009052, gives ·0703 for the length of a column of
mercury, the expansion of which is equal to that of a steel rod whose
length is unity.

We have now to multiply 42 inches by ·0703, which gives 2·95 inches;
and this, deducted from 42, leaves 39·1 inches; so that the length
of rod we have chosen is sufficiently near the truth. Now, double
2·95 inches, and add one tenth of its product, and we shall have 6·49
inches for the length of the mercurial column forming the requisite
compensation. Mr. Baily’s more accurate calculation gives 6·31 inches.

A mercurial compensation pendulum may be formed, having a cylinder
of steel or iron, with its top constructed in the same manner as the
top of the stirrup, so as to receive the screw of the rod. To find
the length of the mercurial column necessary in a pendulum of this
description (that is, with a cylinder made of steel), we must double
the linear expansion of steel, and take it from the absolute expansion
of mercury to obtain the relative vertical expansion of the mercury.
This will be ·00010010 - ·00001272 = ·00008738; and, proceeding as
before, we have ·0000063596/·00008738 = ·07279.

Let the length of the steel rod be, as before, 42 inches. Multiplying
this by ·07279, we have 3·057, which being doubled, and one tenth
of the product added, we obtain 6·72 inches for the length of the
compensating mercurial column; which Mr. Baily states to be 6·59.

A mercurial compensation pendulum having a rod of glass has been
employed by the writer of this article, who has had reason to think
well of its performance. Its cheapness and simplicity much recommend
it. It is merely a cylinder of glass of about 7 inches in depth, and
2-1/2 inches diameter, terminated by a long neck, which forms the
rod of the pendulum, the whole blown in one piece. A cap of brass is
clamped by means of screws to the top of the rod, and to this the
pendulum spring is pinned.

We have unquestionable authority for saying, that the mercurial
pendulum of the usual construction, that is, with a steel rod and glass
cylinder, is not affected by a change of temperature simultaneously in
all its parts. Now, the pendulum of which we are treating being formed
throughout of the same material in a single piece, and in every part
of the same thickness, it is presumed it cannot expand in a linear
direction, until the temperature has penetrated to the whole interior
surface of the glass, when it is rapidly diffused through the mass of
mercury. M. Biot mentions that a pendulum of this kind was formerly
used in France, and expresses his surprise that it was no longer
employed, as he had heard it very highly spoken of. The writer of this
article has also used a pendulum with a glass rod, which differs from
that we have just mentioned, in having the lower end of the rod firmly
fixed in a socket attached to the centre of a circular iron plate, on
the circumference of which a screw is cut, which fits into a collar of
iron, supporting the cylinder (to which it is cemented) by means of a
circular lip.

This arrangement, though perhaps less perfect than that we have just
described, the pendulum not being in one piece, has the advantage of
allowing a circular plate of glass to be placed upon the surface of
the mercury, as practised by Mr. Browne. To determine the length of
a column of mercury for a glass pendulum, let us suppose the glass,
including the cylinder, to be 41 inches in length. Multiplying this
by ·0529, the number taken from Table II. for a glass rod and mercury
in a glass cylinder, we have 2·17 inches for the uncorrected length
of mercury, which compensates 41 inches of glass. Suppose the steel
spring to be one inch and a half long: multiplying this by ·0703, the
appropriate decimal taken from Table II., we have 0·1, the length of
mercury due to the steel, making with the former 2·27 inches, which,
being doubled, and the product increased by its one-tenth part, we
obtain five inches for the length of the required column of mercury.


_Compensation Pendulum of Wood and Lead, on the Principle of the
Mercurial Pendulum._

If by any contrivance wood could be rendered impervious to moisture,
it would afford one of the most convenient substances known for a
compensation pendulum. It does not appear that sufficient experiments
have been made upon this subject to decide the question. Mr. Browne
of Portland Place, who has devoted much of his time and attention to
the most delicate enquiries of this kind, has, we believe, found that
if a teak rod is well gilded, it will not afterwards be affected by
moisture. At all events, it makes a far superior pendulum, when thus
prepared, to what it does when such preparation is omitted.

Mr. Baily, in the paper we have before alluded to, proposes an
economical pendulum to be constructed by means of a leaden cylinder and
a deal rod. He prefers lead to zinc, on account of its inferior price,
and the ease with which it may be formed into the required shape; and
as there is no considerable difference in their rates of expansion, it
is equally applicable to the purpose.

Let the length of the deal rod be taken at 46 inches. Then, to find the
length of the cylinder of lead to compensate this, we have, in Table
II., ·1427 for such a pendulum; which, being multiplied by 46, the
product doubled, and one tenth of the result added to it, gives 14·44
inches for the length of the leaden cylinder. Mr. Baily’s compensation
gives 14·3 inches.

[Illustration: _Captn. Kater, del._     _H. Adlard, sc._

_London, Pubd. by Longman & Co._]

The rod is recommended to be made of about three eighths of an inch
in diameter: the leaden cylinder is to be cast with a hole through
its centre, which will admit with perfect freedom the cylindrical end
of the rod. The cylinder is supported upon a nut, which screws on the
end of the rod in the usual manner. This pendulum is represented at
_fig. 224._

Mr. Baily proposes that the pendulum should be adjusted nearly to the
given rate by means of the screw at the bottom, and that the final
adjustment be made by means of a slider moving along the rod. Indeed,
this is a means of adjustment which we would recommend to be employed
in every pendulum.


_Smeaton’s Pendulum._

We shall conclude our account of compensation pendulums with a
description of that invented by Mr. Smeaton. The compensation for
temperature in this pendulum is effected by combining the two modes,
which have been so fully described in the preceding part of this
article.

The pendulum rod is of solid glass, and is furnished with a steel screw
and nut at the bottom in the usual manner. Upon the glass rod a hollow
cylinder of zinc, about the eighth of an inch thick, and about 12
inches long, passes freely, and rests upon the nut at the bottom of the
pendulum rod.

Over the zinc cylinder passes a tube made of sheet-iron. The edge of
this tube at the top is turned inwards, and is notched so as to allow
of this being effected. A flanche is thus formed, by which the iron
tube is supported, upon the zinc cylinder. The lower edge of the iron
tube is turned outwards, so as to form a base destined to support a
leaden cylinder, which we are about to describe.

A cylinder of lead, rather more than 12 inches long, is cast with a
hole through its axis, of such a diameter as to allow of its sliding
freely, but without shake, upon the iron tube over which it passes, and
by the lower extremity of which it is supported.

Now the zinc, resting upon the nut and expanding upwards, will raise
the whole of the remaining part of the compensation. This expansion
upwards will be slightly counteracted by the lesser expansion downwards
of the iron tube, which carries with it the leaden cylinder. The
cylinder of lead now acts upon the principle of the mercurial pendulum,
and, expanding upwards, contributes that which was wanting to restore
the centre of oscillation to its proper distance from the point of
suspension.

This pendulum, we have been informed, does well in practice, and we are
not aware that any description of it has been before published.

The method of calculating the length of the tubes required to form the
compensation is very simple; nothing more is necessary than to find the
length of zinc, the expansion of which is equal to that of the pendulum
rod.

Let the pendulum rod be composed of 43 inches of glass, the spring
being an inch and a half long, and the screw between the end of the
glass rod and the nut half an inch, making in the whole two inches of
steel and 43 inches of glass.

Now to find the length of zinc that will compensate the glass, we have,
from Table II., for glass and zinc ·2773, which, multiplied by 43,
gives 11·92 inches. In like manner we obtain as a compensation for two
inches of steel 0·74 of zinc, which, added to 11·92, gives 12·66 inches
for the total length of the zinc cylinder.

Now if the iron tube and the lead cylinder be each made of the same
length as the zinc, and arranged as we have described, the compensation
will be perfect.

To prove this, find, by means of the expansions given in Table I., the
actual expansion of each of the substances employed in the pendulum,
and we shall have the following results:--

  The expansion of 12·66 inches of zinc expanding
  upwards is                                        ·0002186

  Deduct that of 12·66 inches of iron expanding
  downwards                                         ·0000869
                                                    --------
  Remaining effect of expansion upwards, referred
  to the lower extremity of the iron tube           ·0001317

  Now, for the lead.--On the principle of the
  mercurial compensation, subtract one tenth part
  of the length of the cylinder, and take half
  the remainder, and we shall have six inches of
  lead, the expansion of which upwards is           ·0000955
                                                    --------
  Total expansion of the compensation upwards       ·0002272
                                                    --------
  To find the expansion of the rod, we have
  the expansion of 43 inches of glass               ·0002059

  Of two inches of steel                            ·0000127
                                                    --------
  Total expansion of the pendulum rod               ·0002186

Agreeing near enough with that of the compensation before found.

As we conceive we have been sufficiently explicit in our description
of this pendulum, in the construction of which no difficulty presents
itself, we think an engraved representation of it would be superfluous.

We have hitherto treated only of compensations for temperature; but
there is another kind of error, which has been sometimes insisted upon,
arising from a variation in the density of the atmosphere. If the
density of the atmosphere be increased, the pendulum will experience
a greater resistance, the arc of vibration will in consequence be
diminished, and the pendulum will vibrate faster. This, however, is in
some measure counteracted by the increased buoyancy of the atmosphere,
which, acting in opposition to gravity, occasions the pendulum to
vibrate slower. If the one effect exactly equalled the other, it is
evident no error would arise; and in a paper by Mr. Davies Gilbert,
President of the Royal Society of London, published in the Quarterly
Journal for 1826, he has proved that, by a happy chance, the arc in
which pendulums of clocks are usually made to vibrate is the arc at
which this compensation of error takes place. This arc, for a pendulum
having a brass bob, is 1° 56′ 30″ on each side of the perpendicular;
and for a mercurial pendulum, 1° 31′ 44″, or about one degree and a
half.

It is well known that, if a pendulum vibrates in a circular arc, the
times of vibration will vary nearly as the squares of the arcs; but
if the pendulum could be made to vibrate in a cycloid, the time of
its vibration in arcs of different extent would then remain the same.
Huygens and others, therefore, endeavoured to effect this by placing
the spring of the pendulum between cheeks of a cycloidal form.

When escapements are employed which do not insure an unvarying impulse
to the pendulum, the force may be unequally transmitted through the
train of the clock in consequence of unavoidable imperfections of
workmanship, and the arc of vibration may suffer some increase or
diminution from this cause. To discover a remedy for this is certainly
desirable.

The writer of this article some years ago imagined a mode, which he
believes has also been suggested by others, by which he conceived a
pendulum might be made to describe an arc approaching in form to that
of a cycloid. The pendulum spring was of a triangular form, and the
point or vertex was pinned into the top of the pendulum rod, the base
of the triangle forming the axis of suspension. Now it is evident that
when the pendulum is in motion, the spring will resist bending at the
axis of suspension, with a force in some sort proportionate to the base
of the triangle.

Suppose the pendulum to have arrived at the extent of its vibrations;
the spring will present a curved appearance; and if the distance from
the point of suspension to the centre of oscillation be then measured,
it will evidently, in consequence of the curvature of the spring, be
shorter than the distance from the point of suspension to the centre of
oscillation, measured when the pendulum is in a perpendicular position,
and consequently when the spring is perfectly straight.

The base of the triangle may be diminished, or the spring be made
thinner; either of which will lessen its effect. We cannot say how this
plan might answer upon further trial, as sufficient experiments were
not made at the time to authorize a decisive conclusion.

We have thus completed our account of compensation pendulums; but
before we conclude, it may not be unacceptable if we offer a few
remarks on some points which may be found of practical utility.

The cock of the pendulum should be firmly fixed either to the wall or
to the case of the clock, and not to the clock itself, as is sometimes
done, and which has occasioned much irregularity in its rate, from the
motion communicated to the point of suspension. We prefer a bracket or
shelf of cast iron or brass, upon which the clock may be fixed, and the
cock carrying the pendulum attached to its perpendicular back. This
bracket may either be screwed to the back of the clock-case, or, which
is the better mode, securely fixed to the wall; and if the latter be
adopted, the whole may be defended from the atmosphere, or from dust,
by the clock-case, which thus has no connection either with the clock
or with the pendulum.

The point of suspension should be distinctly defined and immovable.
This may be readily effected, after the pendulum shall have taken the
direction of gravity, by means of a strong screw entering the cock
(which should be very stout) on one side, and pressing a flat piece of
brass into firm contact with the spring.

The impulse should be given in that plane of the rod which coincides
with the plane of vibration passing through the axis of the rod. If the
impulse be given at any point either before or behind this plane, the
probable result will be a tremulous unsteady motion of the pendulum.

A few rough trials, and moving the weight, will bring the pendulum near
its intended time of vibration, which should be left a little too slow;
when the bob should be firmly fixed to the rod, if the form of the
pendulum will admit of it, by a pin or screw passing through its centre.

The more delicate adjustment may be completed by shifting the place of
the slider with which the pendulum is supposed to be furnished on the
rod.

Mr. Browne (of whom we have before spoken) practises the following very
delicate mode of adjustment for rate, which will be found extremely
convenient, as it is not necessary to stop the pendulum in order to
make the required alteration. Having ascertained, by experiment, the
effect produced on the rate of the clock, by placing a weight upon the
bob equal to a given number of grains, he prepares certain smaller
weights of sheet-lead, which are turned up at the corners, that they
may be conveniently laid hold of by a pair of forceps, and the effect
of these small weights on the rate of the clock will be, of course,
known by proportion. The rate being supposed to be in defect, the
weights necessary to correct this may be deposited, without difficulty,
upon the bob of the pendulum, or upon some convenient plane surface,
placed in order to receive them: and should it be necessary to remove
any one of the weights, this may readily be done by employing a
delicate pair of forceps, without producing the slightest disturbance
in the motion of the pendulum.




INDEX.


  A.

  Action and reaction, 34.

  Aeriform fluids, 26.

  Animalcules, 12.

  Atmosphere, impenetrability of, 22.
    Compressibility and elasticity of, 23.

  Atoms, 6.
    Coherence of, 7.

  Attraction, magnetic, of gravitation, 8, 50, 64.
    Molecular or atomic, 69.
    Cohesion, 70.

  Attwood, machine of, 92.

  Axes, principal, 138.

  Axis, mechanical properties of, 128.


  B.

  Balance, 279.
    Of Bates, 288.
    Use of, 289.
    Danish, 299.
    Bent-lever of Brady, 301.

  Bodies, 2.
    Lines, surfaces, edges, area, length of, 4.
    Figure, volume, shape of, 5.
    Porosity of, 17.
    Compressibility of, 18.
    Elasticity, dilatibility of, 19.
    Inertia of, 27.
    Rule for determining velocity of; motion of two bodies after
      impact, 38.


  C.

  Capillary attraction, 73.

  Capstan, 179.

  Cause and effect, 7.

  Circle of curvature, 99.

  Cog, hunting, 191.

  Components, 51.

  Cord, 163.

  Cordage, friction and rigidity of, 260.

  Crank, 241.

  Crystallisation, 14.

  Cycloid, 158.


  D.

  Damper, self-acting, 234.

  Deparcieux’s compensation pendulum, 319.

  Diagonal, 51.

  Dynamics, 160.

  Dynamometer, 305.


  E.

  Electricity, 76.

  Electro-magnetism, 76.

  Equilibrium, neutral, instable, and stable, 118.


  F.

  Figure, 5.

  Fly-wheel, 239.

  Force, 6.
    Composition and resolution of, 49.
    Centrifugal, 98.
    Moment of; leverage of, 135.
    Regulation and accumulation of, 224.

  Friction, effects of, 96.
    Laws of, 264.


  G.

  Governor, 227.

  Gravitation, attraction of, 77.
    Terrestrial, 84.

  Gravity, centre of, 107.

  Gyration, radius of, centre of, 137.


  H.

  Hooke’s universal joint, 252.

  Hydrophane, porosity of, 18.


  I.

  Impact, 39.

  Impulse, 65.

  Inclined plane, 163–209.

  Inclined roads, 211.

  Inertia, 27.
    Laws of, 32.
    Moment of, 137.


  J.

  Julien le Roy, compensation tube of, 319.


  L.

  Lever, 163.
    Fulcrum of; three kinds of, 167.
    Equivalent, 176.

  Line of direction, 110.

  Liquids, compressibility of, 24.

  Loadstone, 68.


  M.

  Machines, simple, 160.
    Power of, 175.
    Regulation of, 225.

  Magnet, 68.

  Magnetic attraction, 8.

  Magnetism, 76.

  Magnitude, 4.

  Marriott’s patent weighing machine, 305.

  Materials, strength of, 272.

  Matter, properties of, 2.
    Impenetrability of, 4.
    Atoms of; molecules of, 6.
    Divisibility of, 9.
    Examples of the subtilty of, 12.
    Limit to the divisibility of, 13.
    Porosity of; density of, 17.
    Compressibility of, 18.
    Elasticity and dilatability of, 19.
    Impenetrability of, 22.
    Inertia of, 27.

  Mechanical science, foundation of, 16.

  Metronomes, principles of, 153.

  Molecules, 6.

  Motion, laws of, 46.
    Uniformly accelerated, 87.
    Table illustrative of, 90.
    Retarded; of bodies on inclined planes and curves, 94.
    Rotary and progressive, 127.
    Mechanical contrivances for the modification of, 245.
    Continued rectilinear; reciprocatory rectilinear; continued
      circular; reciprocating circular, 246.


  N.

  Newton, method of, for determining the thickness of transparent
      substances, 10.
    Laws of motion of, 46.


  O.

  Oscillation, 129.
    Of the pendulum, 145.
    Centre of, 152.


  P.

  Parallelogram, 51.

  Particle, 6.

  Pendulum, oscillation or vibration of, 145.
    Isochronism of, 147.
    Centre of oscillation of, 152.
    Of Troughton, 284.
    Compensation, 307.
    Of Harrison, 313.
    Tubular, of Troughton, 314.
    Of Benzenberg, 316.
    Ward’s compensation, 318.
    Captain Kater’s compensation, 320.
    Reid’s; Ellicott’s compensation, 322.
    Steel and brass compensation, 324.
    Mercurial, 326.
    Graham’s mercurial, 329.
    Wood and lead, 334.
    Smeaton’s, 335.

  Percussion, 130.
    Centre of, 144.

  Planes of cleavage, 15.

  Porosity, 17.

  Power, 161.

  Properties, 2.

  Projectiles, curvilinear path of, 82.

  Pulley, 164.
    Tackle; fixed, 198.
    Single moveable, 200.
    Called a runner; Spanish bartons, 205.


  R.

  Rail-roads, 213.

  Regulating damper, 233.

  Regulators, 227.

  Repulsion, 8.
    Molecular, 74.

  Resultant, 51.

  Rose-engine, 250.


  S.

  Salters, spring balance of, 305.

  Screw, 209.
    Concave, 217.
    Micrometer, 223.

  Shape, 5.

  Siphon, capillary, 73.

  Spring, 304.

  Statics, 160.

  Steelyard, 294.
    C. Paul’s, 296.
    Chinese, 299.


  T.

  Table, whirling, 99.

  Tachometer, 234.

  Tread-mill, 179.


  V.

  Velocity, angular, 99.

  Vibration, 129.
    Of the pendulum, 145.
    Centre of, 152.

  Volume, 5–17.


  W.

  Watch, mainspring of; balance wheel of, 195.

  Water regulator, 229.

  Wedge, 209.
    Use of, 215.

  Weight, 161–291.

  Weighing machines, 278.
    For turnpike roads, 302.
    By means of a spring, 303.

  Wheels, spur, crown, bevelled, 189.
    Escapement, 194.

  Wheel and axle, 177.

  Wheel-work, 176.

  Winch, 179.

  Windlass, 178.

  Wollaston’s wire, 10.


  Z.

  Zureda, apparatus of; Leupold’s application of, 251.


  END OF MECHANICS.

  LONDON:
  SPOTTISWOODES and SHAW
  New-street-Square.

*** END OF THE PROJECT GUTENBERG EBOOK 66078 ***