path: root/47456-0.txt

*** START OF THE PROJECT GUTENBERG EBOOK 47456 ***

Transcriber's Note: Italic text is denoted by _underscores_ and bold
text by =equal signs= around the text. Small capitals in the printed
works have been transcribed as ALL CAPITALS.

More Transcriber's Notes may be found at the end of this document.


The picture opposite the title-page is a reprint of a page from the
volume of plates, made in 1771, to illustrate Diderot's Encyclopædia.
This page is one of six, each 8×12 ins. in the original, illustrating
the article in the encyclopædia on binding.

The picture in the upper part of the plate represents a binder's
workshop. The person at A is beating a book. The woman at B is sewing.
The man at C is cutting or trimming the edges of a book. The man at D
is working a press.

Of the figures below: 1 is a piece of marble on which books are beaten;
2 is a piece of marble of different shape for the same purpose; 3 is a
beating hammer; 4 is a sewing table or bench, on which books are sewn;
5 and 6 are balls of thread for sewing books; 7, 8, 9, 10, 11, and
12 are parts of a sewing bench; 13 and 14 are large and small paper
folders.

[Illustration:]




  Notes on

  Bookbinding for Libraries

  By

  John Cotton Dana

  Librarian Free Public Library,
  Newark, N. J.

  Revised and Enlarged Edition

  Library Bureau, Chicago
  1910


  COPYRIGHTED
  1910
  LIBRARY BUREAU




=Naudé On Binding=

"The fourth is, to retrench & cut off all the superfluous expences,
which many prodigally and to no purpose bestow upon the binding and
ornaments of their Books, and to employ it in purchasing such as they
want, that so they may not be obnoxious to that censure of _Seneca_,
who handsomly reproaches those, _Quibus voluminum suorum frontes maxime
placent titulique;_ & this the rather, that the binding is nothing but
an accident & form of appearing, without which (at least so splendid
and sumptuous) Books become altogether as useful, commode & rare; it
becoming the ignorant onely to esteem a Book for its cover; seeing it
is not with Books, as it is with men, who are onely known and respected
for their robes and their clothes, so that it is a great deal better,
and more necessary, for example, to have a good quantity of Books, well
& ordinarily bound, than to have a little Chamber or Cabinet full of
washed, gilded, ruled, and enriched with all manner of nicity, lux and
superfluity."

From John Evelyn's translation of Gabriel Naudé's "Instructions
Concerning Erecting of a Library." London. 1661. Chapter 5.




=Preface to Second and Revised Edition=


In the first edition of this book I said that it ought not to be taken
as a final authority, but as a set of suggestions which I hoped would
arouse interest in the subject of library binding and lead a few to
pursue the subject further. Some of the changes made for this edition
indicate that I have followed the topic a little further myself,--I
hope with advantage to my readers.

Several chapters are new. There are many minor changes and omissions.
The lists have been enlarged and brought into one.

I had looked into the subject of library binding and discovered the
ignorance concerning it of American librarians, including myself,
before I visited Mr. Chivers' beautiful bindery in Bath, England,
several years ago. That visit had much to do with the contents of this
little book. Mr. Chivers was quite of my opinion that the only way to
induce librarians in America to improve our binding was to persuade
us to look into the subject. If the book has led some to do this it
has accomplished its purpose. As to the fundamental points in it, they
largely come, I am pleased to confess, from England, by way of that
bindery in Bath.

At the risk of seeming to speak to commercial ends I quote in effect
some of the things said by Mr. Chivers in one of his circulars,
prefacing the quotation with the remark that the point I wish chiefly
to make in this book is the advantage of having certain books, when
new, bound once for all:

"The following statement is not an exaggeration: A library saves
half the cost of new popular books, and of replacements for which
much use may be anticipated, if it purchases them in Cedric Chivers'
patent bindings. New books supplied in these bindings are sold as
being bound once for all. It is thought that they are so bound as
to serve for quite fifty per cent. more issues than will a book
purchased in publisher's cloth, used for a time, and then rebound in
the ordinary way. Generally speaking such results and even better
results are obtained. Occasionally, however, a book does not come up
to these expectations. In such cases it is especially desired that its
failure be reported and, if necessary, that the book be returned for
examination. The paper used in modern books is of such varying quality
that it is sometimes difficult to tell without actually trying what is
the best manner of treating it."

Buy books well bound direct from publishers' sheets; mend ordinary
books very little; rebind them early; watch results; tabulate them, and
make use of experience. These are the main themes of this book.

  J. C. D.

  Free Public Library,
    Newark, N. J., May, 1909.




=Contents=


                                                                   PAGE

  Description of Frontispiece                                         4

  Quotation from Naudé                                                9

  Preface to Second and Revised Edition                              11

  Table of Contents                                                  13

  List of Illustrations                                              15

  CHAPTER

      I. Introductory                                                17

     II. Binding: the Process Described                              26

    III. The Literary Side of Library Rebinding                      36

     IV. Binding Materials Suitable for a Library                    41

      V. Rebinding for Libraries                                     44

     VI. Lettering and Numbering the Backs of Books                  53

    VII. Pamphlets                                                   58

   VIII. Magazine Binders                                            61

     IX. Repairing Books, General Rules                              68

      X. Repairing Books, Newark Methods                             74

     XI. Repairing Books, Materials and Tools                        86

    XII. Covering Books                                              90

   XIII. Leather, General Notes                                      93

    XIV. Paper and Paper Making                                     101

     XV. Binding Records                                            110

    XVI. Binding Records and Notes--Newark                          112

   XVII. Bindery Equipment                                          115

  XVIII. List of Technical Terms                                    119

    XIX. List of Makers of and Dealers in Bookbinders'
           Materials, Tools and Machinery                           161

     XX. A Few of the Best Books on Bookbinding,
           Paper and Leather                                        163

         Index                                                      169




=List of Illustrations=


                                                                   PAGE

  Old Picture of Bindery and Tools                       _Frontispiece_

  Sewing, Drawing Showing Four Methods                               26

  Sewing on Tapes                                                    32

  Method of Attaching Slips on Ends of Bands to Boards               34

  Plates, Two Methods of Inserting Them                              48

  Method of Lacing in Slips on Ends of Bands                         49

  French and Ordinary Joints                                         50

  Anatomy of a Joint                                                 51

  Type Faces Suitable for Lettering                                  55

  Type Cabinet                                                       56

  Backing Boards, metal                                             121

  Backing Boards, wood, steel-faced                                 121

  Backing Hammer                                                    122

  Backing Press                                                     123

  Beating Hammer                                                    124

  Boards, brass-bound                                               125

  Hand Wheel Drive Cutter                                           131

  Finishing Presses                                                 135

  Finishing Stand                                                   136

  Lettering Pallet                                                  149

  Flat Polisher                                                     151

  Rounding Hammer                                                   153

  Sewing Bench                                                      155

  Standing Press of Wood and Iron                                   158




CHAPTER I

=Introductory=


As the title indicates these notes have been compiled in the hope that
they may be of assistance to librarians in caring for the binding and
rebinding of library books. They hardly touch upon publishers' binding
or the decoration of bindings. The suggestions and advice they give
should not be taken as final, for the binding and rebinding question
is not yet settled. They may help some to carry out more successfully
their own inquiries and experiments. If good binders were more common
librarians would need little of the information here briefly set forth.
But under the present conditions of the bookbinder's art in this
country librarians themselves must often furnish considerable expert
knowledge, if they wish their work well done.

I have refrained from going much into the details of the process of
binding. The details can only be made clear by means of illustrations,
and have already been most admirably set forth in Douglas Cockerell's
book. I have tried to draw attention to the important points. The
librarian ought to know good results when he sees them, or at least
when he tests them on his books; the details of every step he can learn
if he will, by a little practice and a good deal of observation. No
librarian should try to bind or to conduct personally his own bindery.
Binding is a special trade, and skill and speed in it come only by
long practice. The librarian cannot become a skilled binder. He should
become familiar with the results of the binding he gets by a study
of his books. If he finds they do not wear well, but rot, break or
show loose pages, let him keep a few statistics, and if he learns he
is wasting money on cheap work or poor material, let him change his
material and his processes, and perhaps his binder. I hope this book
may lead some to test the work they are now getting, and may help some
to get more satisfactory workmanship and more enduring materials. It
is not a guide to the craft of binding. To get good binding, go to a
good binder; to learn about the binding craft, practice it and read
Cockerell; to discover if your binding is good, watch it and gather
statistics of its wear.

Much of the information, many reports of experiences and many
suggestions will be found in the lists of leathers, etc., and
definitions of terms used in binding. It seemed unwise to repeat them
as part of a connected text.

In considering the subject of economical binding and rebinding for
libraries, we find that we are entirely without standards. We have no
figures for comparisons. Librarians have, save in a very few cases,
made no study of the comparative value of bindings, either of original
cloth or of the rebindings they have had put on their books. If a few
librarians would note the number of times books can be issued without
rebinding after they are received in the original publisher's cloth,
and how many issues they will stand after they have been once, or
twice, rebound, they would, in a few months, have data from which they
could draw helpful conclusions in regard to the comparative value of
bindings and rebindings.

The test of a binding, whether publisher's original, special from the
sheets, or a rebinding, lies, for ordinary lending books, in the ratio
of its cost to the number of times the book it covers is lent for home
use before being discarded. This ratio has rarely been systematically
noted.

To the inquiry, does the method of rebinding which my library now
employs give the best possible return for the money spent? most
librarians must reply that they do not know.

Reference and college libraries are often also much in the dark. The
continued quite general use for permanent bindings of a leather which
tests have shown will not last over 25 or 30 years at the most is an
evidence of this.

In England, as is well known, a good many years of careful observation
and comparison of experiments have led a large number of librarians to
the conclusion which some American librarians also accept, that it is
the part of sound economy to have books carefully bound directly from
publishers' sheets, even though the prices of such bindings seem at
first unduly high.

I sent a letter of inquiry to a large number of libraries asking for
detailed information about the wear of books in publishers' bindings
and in the one or more rebindings which were placed on them. Replies
were received from 18 libraries, giving brief life histories of 74
books. Definite conclusions cannot be drawn from these reports, as
librarians differ much in their ways of treating books. Some rebind
them as soon as they show serious signs of wear; others keep them in
circulation long after they have begun to go to pieces. But the figures
indicate that it would pay these libraries, as it probably would all
others, to get most of the books which are to be subjected to much
handling strongly bound direct from publishers' sheets.

The reports show that 74 books cost, including first price, rebinding
and labor of handling for rebinding, an average of $1.38 each; that
they were lent an average of 79 times in the two states, new and
rebound; and that they were out of use an average of five weeks while
being rebound. A book of a nature similar to those reported on,
well-bound from publishers' sheets costs about $1.50; can be lent from
100 to 150 times and loses no time in being rebound.

Of these books 52 were rebound a second time at an average cost,
including labor in preparation, of 40 cents; were out of use an average
of five weeks; and were lent an average of 43 times each in this second
binding. The complete history of the books a second time rebound is as
follows:

  First cost                              .95
  Cost of first rebinding                 .36
  Cost of time in handling                .07
  Cost of second rebinding                .33
  Cost of time in handling                .07
                                         ----
    Total cost                           1.78

  Times lent in publishers' cloth          32
  Times lent in first rebinding            47
  Times lent in second rebinding           43
                                         ----
                                          122

  Time out of use first rebinding   5.5 weeks
  Time out of use second rebinding  5.0 weeks
    Total time out of use          10.5 weeks

These figures do not tell the whole story. The book bound strongly and
flexibly from publishers' sheets is from the first more convenient to
handle and pleasanter to read, and usually looks better throughout all
its one long life than do, on the average, those books which twice
or thrice in their histories get into a broken-backed, loose-leaved,
generally disreputable condition. Furthermore, and this is most
important, a book is most wanted in a library when it is new; if sent
out to be rebound for five and a half weeks after it has been lent 32
times it is out of use just when it is most in demand; and the library
loses in its effectiveness--that is, in the service it can render its
public for the money expended--much more than the mere difference in
the money cost of the two kinds of binding would indicate. The durable
first binding gives us a book which can be in constant service from 100
to 150 times from the day it goes to the shelves, just when it is most
needed. A book once or twice rebound in the first few months of its
life is a special source of annoyance--the paradox is permissible--by
its very absence.

Table of life histories:

[Transcriber's Note: The following text is the transcription of a
 table whose column headings were written vertically.

  Key to column headings:--

  A: Library,
  B: No. of books reported on,
  C: First cost of books,
  D: Times lent before rebinding,
  E: Cost of rebinding,
  F: Weeks out of use,
  G: Cost of handling,
  H: Times lent in rebinding,
  I: Cost of 2nd rebinding,
  J: Weeks out of use,
  K: Cost of handling, and
  L: Times lent in 2nd rebinding.]

  -----+-----+------+-----+-----+-----+-----+-----+-----+---+-----+-----
    A  |  B  |  C   |  D  |  E  |  F  |  G  |  H  |  I  | J |  K  |  L
  -----+-----+------+-----+-----+-----+-----+-----+-----+---+-----+-----
     1 |   9 | 9 00 |  30 | 4 50|  6  |     |  40 |     |   |     |
     2 |   2 | 2 00 |  40 |   70|  8  |   20|  70 |     |   |     |
     3 |   5 | 3 25 |  19 | 2 50|  6  |   50|  23 |     |   |     |
     4 |  10 | 9 80 |  15 | 4 50|  4  |   60|  25 | 4 50| 8 |  60 |  32
     5 |   1 | 1 00 |  28 |   35|  4  |   12|  50 |     |   |     |
     6 |  10 |10 00 |  28 | 2 50|  6  |   30|  31 | 2 50| 6 |  30 |  22
     7 |   4 | 4 00 |  20 | 1 80|  4  |   40|  25 | 1 80| 4 |  40 |  15
     8 |   1 | 1 00 |  70 |   54| 10  |   08| 100 |     |   |     |
     9 |   1 | 1 00 |  75 |   35| 10  |   08|  45 |   54|10 |  08 | 100
    10 |   3 | 3 00 |  29 | 1 05|  2  |   30|  80 | 1 05| 2 |  30 | 115
    11 |   1 |   99 |  37 |   40|  6  |   12|  36 |     |   |     |
    12 |   3 | 2 70 |  35 | 1 20|  6  |   36|  40 |     |   |     |
    13 |   1 |   96 |  18 |   35|  6  |   10|  64 |   35| 6 |  10 |  32
    14 |   2 | 1 80 |  22 |   50|  5  |   16|  14 |   70| 5 |  16 |  14
    15 |   4 | 2 72 |  19 | 1 40|  4  |   32|  19 | 1 40| 5 |  32 |  14
    16 |  15 |15 00 |  45 | 3 75|  4  | 1 50|  60 | 3 75| 4 |1 50 |  50
    17 |   1 | 1 00 |  15 |   25|  4  |   06|  60 |   15| 4 |  06 |  50
    18 |   1 |   98 |  30 |   35|  4  |   08|  62 |   35| 4 |  08 |  28
  -----+-----+------+-----+-----+-----+-----+-----+-----+---+-----+-----
  Totals  74 |70 20 | 575 |26 99| 99  | 5 22| 844 |17 09|58 |3 84 | 472
  Averages for      |     |     |     |     |     |     |   |     |
   each Book     95 |  32 |   36|5-1/2|   07|  47 |   33| 5 |  07 |  43
  ------------------+-----+-----+-----+-----+-----+-----+---+-----+-----

In the Newark library an examination of 56 books, chiefly novels, from
15 or 20 different publishers, shows that on the average they were lent
in publishers' binding only 25 times each before being rebound; and
that 42 books in the juvenile department were lent in the publishers'
binding an average of only 17 times each.

In bindings and rebindings one of the most essential things to be
secured is ease of opening. A book that opens out easily, and lies flat
without being pressed or held in position, will probably keep clean and
whole for more than twice as many lendings as one that is held together
tightly at the back. As a great many of the library books which call
for rebindings have to be trimmed at the back and overcast, it is
essential that the overcast sewing be of a flexible nature, one that
permits of the easy opening of the book. Probably few of the factors
in book construction and book injury have been more effective than the
tight binding, held open with difficulty, which is produced by nearly
all of the current overcasting or whipstitching.

Another point that cannot be too strongly insisted on is that books not
only differ from one another in their natures and so require different
treatment in binding; but also differ in the use they are to receive,
and require different bindings on that account.

It should be understood that bookbinding is a craft in the best sense
of that word. To bind a book well calls for good judgment and care
at every step. The librarian can draw up schedules with infinity
of detail, and make them as correct as he may please, basing them
on experience without end; and the binder, so far as material and
processes are concerned, may seem to follow these specifications
exactly, and still may produce poor bindings. To secure a good binding
the spirit of the binder must go into it. In drawing the thread, in
paring and placing the leather, in applying the paste and glue, and
in every other of the many processes involved, the man without good
will, as the man without skill, can spoil the whole binding. Librarians
should learn to esteem bookbinding highly. It is a craft which lies
close to them. It is preëminently their business to encourage it to
grow in excellence. They should develop their local binder's interest
in his calling, stand by him, urge him on to better work, and pay him
adequately for it.

One may frankly say that the character of binding done in nearly all
libraries in America has been, up to the present time, a discredit to
the library profession. We owe it to ourselves to take up this craft
and do what we can to elevate it.

One objection sometimes made to bindings of the highest grade is
that they last too long; and after the book is too greatly soiled
and tattered within to be longer kept, the binding itself still
holds, showing that more care has been put into its construction, and
consequently more cost, than it needed. The objection needs only to be
stated for its absurdity to be seen. The thorough binder, the skilled
craftsman, adapts his binding to the book and to the use, as far as he
can judge of it, which it is to receive.

He binds each book so well that it will hold together to the end of
time; or until its paper fairly drops to pieces. He can issue with each
volume no guarantee that it will not receive more than its proper
baptism of dirt from careless borrowers long before the paper in it
begins to give way and fray out. The binder's obligation is to bind the
book well. It is the librarian's business to see that the book is, as
to its interior, well treated. As to its binding lasting too long, why
should the librarian concern himself about the shell after the kernel
is eaten? It should be noted again, however, that a book well bound,
opening easily, and lying open without pressure from fingers or thumbs,
keeps clean many times longer than one that opens hard.

The sum of all my observations is, the best is the cheapest. If a
book is worth binding let it be bound by the best man available. If
possible, buy books so well bound from the publishers' sheets, that
they will never need to be bound again.




CHAPTER II

=Binding: The Process Described=


Books are now printed in large sheets from 4 to 64 pages at a time. In
many cases paper is drawn from a roll (as it is in the printing of a
newspaper), printed on both sides in large sections of 64 pages, and
cut and folded as it leaves the press. These sheets, of several pages
each, after being printed, are gathered into a complete book, sometimes
by a machine, and are then sewn together by a machine. This machine
for sewing is a comparatively recent invention. In most cases sewing
done on a machine is not as strong as the old-fashioned hand sewing.
The sections, or signatures, or folds of the book, as the several sets
of several pages each are called, are caught together only by thread;
strings or tapes are not used. This sewing is then reinforced by a
piece of cloth, usually thin, cheap muslin, or poor super, which is
pasted over the back and allowed to extend a little way down each side.
But sewing on a machine can be done with strings added and made very
strong.

[Illustration: Sewing

  A  Section of Fifteenth Century sewing on double bands
     with head and tail bands.

  B  Section of modern "flexible" sewing round single bands.

  C  Section of ordinary sewing with sunk bands.

  D  Section of tape sewing advocated for cheap work in
     place of C.

  From report of the Committee on Leather for Bookbinding. Edited for
  Society of Arts. London: Bell & Sons, 1905.]


Covers for books are now made by machines into which are fed pieces
of cardboard and a roll of cloth. The machine cuts the cloth into the
proper size, pastes it and folds it over the boards into a cover,
leaving a loose place between the two boards to be filled by the body
of the book. This cover is then printed in a machine much like a
printing press; the gold of the title on the back or sides or both,
and the colors or blank impressions, for ornament, all being impressed
on it with great rapidity. The completed cover, called a case, is then
pasted to the sides of the book. A book thus bound has nothing to hold
cover and inside together save a strip of thin muslin, with a strip
of paper which goes over it, passing from the back of the book to the
inside of the board covers. This strip grows weak after a little use
and frequently breaks, or pulls away from the cover, or from the back,
or from both. Books printed on cheap paper and folded and sewed and
bound by machinery in the manner thus very briefly outlined can be
produced and sold at present for 10 cents each, or even less.

Books printed with more care, on better paper, with a better quality of
cloth on the cover, and a more elaborate title in real gold instead of
some cheaper imitation of it, books, that is, like the novels issued by
the better class of publishers, can be produced in quantities of from
one to three thousand, for from 15 to 30 cents each. Few of the novels
put on the market today cost the publishers, for their making alone,
as much as the latter price. To this must be added a royalty to the
author, generally 10% of the retail price, the cost of the management
of the business and the advertising. In the case of small editions,
one or two thousand, this brings the original cost of the average work
up to 50 or 75 cents. Suppose this book to be offered at retail at
$1.25. There must then be deducted from this retail price the discount
to the jobber, 25 to 40 +10%, and the royalty, and the advertising,
and the cost of production, etc., leaving a profit to the publisher of
from 5 to 20 cents on each volume. A well-made and widely advertised
novel which does not sell more than a thousand copies is not a very
profitable product for a publisher to put out.

The school text-books issued by the more reputable publishing houses
are generally very well made. They are printed on good paper, usually
rather highly calendered, with good ink, are bound with extra care, and
have good material in their covers. The competition between school book
publishers makes it necessary for them in self-defense to produce books
which will wear well in the hands of the average pupil.

Up to a few years ago all books were sewn by hand, the covers were made
by hand, and hand work was employed in putting book and cover together.

The process of sewing by hand may be briefly described as follows: Two
or more strings or tapes are stretched between the edge of a board and
a stick held horizontally above it by two uprights. The book folded
and ready for sewing, after having been either pressed or beaten with
a hammer to make it lie smooth, is held in a vise and two saw cuts
are made in the back at about the same distance from each other and
from the ends. Two smaller saw cuts are also made in the back of the
book, one between each of the larger ones and the opposite ends of the
back. The first signature--the fold or section made of a large sheet
folded--of the book is laid on the board so that the larger saw cuts
are opposite the two strings. A thread is passed through the small
cut at one end, into the middle of the fold, then out again by the
first string, around the string, and in again to the middle of the
fold, then along the inside of the fold to the next string, around
that string, along inside the fold, then out again at the other small
cut. The second signature is then laid on top of the first. The thread
is passed into the small cut, along and around the two strings, as
with the first signature, and out at the other end, where it is tied
to the end of the thread which has been left sticking out of the
first saw cut for this purpose. This process is continued until the
book is all fastened together and to the strings. As the sewing goes
on, the several signatures are caught together at the smaller holes
at each end by passing the thread, as it comes out of the hole, down
and under the loop made by the passing of the thread between the two
signatures previously sewn. In the case of a book containing a large
number of signatures the thread does not extend the whole length of
each fold, but passes from one to another as it goes the length of
the book, gathering on two signatures at once. Sometimes, by using
four strings instead of two, the string is made to pass through and
to sew on three signatures at a time. Examples of this two-on and
three-on method can be seen in almost any large book bound prior to 15
or 20 years ago. In very careful binding by hand in the early days of
book-making, the strings were not set into saw cuts, but were simply
laid across the back of the book. The thread came out of the signature
and passed around the strings, and went in again. The strings, with
the thread thus wrapped around them, made a welt across the back of
the book. These welts, when covered by the leather of the binding,
showed as raised bands. These raised bands are imitated by pasting bits
of leather on the back in much so-called fine binding today. In some
cases the old process is employed and the bands have a real reason
for existence. Books are sometimes sewn on tapes or strips of vellum.
These, laid across the back, sometimes make ridges which are treated as
bands in the completed book.

In old bindings, to give the book a better appearance at top and
bottom, what is called a headband was put on with thread, the thread
passing through the signatures and from one signature to another
in such a way as still more securely to hold these together. Today
the headband is still used; but usually it is simply pasted in and
is little more than an ornament. Sometimes the book's back is still
further reinforced by pasting or gluing to it a piece of vellum,
leather or heavy cloth before the process of putting on the cover
begins.

Set rules for sewing books should not be laid down. Each book is
treated by the skillful binder, or should be, in accordance with the
character of its paper, the number of inserts, the thickness of the
paper, the size of the signatures, the size of the leaves, the use it
is to receive, and other facts. The good binder binds each book well
according to its kind.

[Illustration: Showing a Method of Sewing on Tapes

The catching up of the alternate groups of threads as they cross the
bands renders the sewing firmer. There are other methods of achieving
this end.

From report of the Committee on Leather for Bookbinding. Edited for
Society of Arts. London: Bell & Sons, 1905.]

After the book is properly sewn, the strings on which it is gathered
are cut off a short distance from the sides. Pieces of cardboard are
cut of the proper size for a cover. The ends of the strings are laced
into them or fastened down upon them with paste or glue. The leather
for the cover is then pasted or glued to the back and the outside of
the boards. The ends are turned over the boards and at the top and
bottom of the book are turned down and pasted to themselves, thus
forming a roll or crown which lies up close to the headband. The sides
are then covered, if the book is not to be bound in full leather, with
cloth or paper or other material. The outside sheets of the books,
called end-sheets, are then pasted to the inside of the cover and the
book is practically complete.

The back of the book is always covered with glue after the sewing and
before the leather or cloth is put on. This glue is thin and hot, and
is put on to hold together the backs of the signatures. In rounding,
the binder manipulates the book with the hands, and taps it with a
hammer until the proper shape is secured. This is done after the coat
of glue has been applied. In edition work this is done on a machine.
In backing the book is held between two metal, or metal-edged, plates
close up to the back, the back having been stiffened previously with a
coat of glue which has not set very firmly; and with a hammer the backs
of the signatures are pounded down and out, making a slight ledge or
groove along the outer edges against which set later the boards of the
covers.

If the book is to be tight back the cloth or leather is glued direct
to the backs of the signatures thus rounded, though often a thin piece
of cloth, super, is first glued on, extending over onto the sides. If
it is to be loose back a double fold of paper is attached to the back,
one sheet to the back and one to the cover material. The leather or
cloth then stands out from the book, when it is open, being attached
to it only at the joints. It is in loose back binding, as said above,
that cloth or leather is sometimes glued fast and with great care to
the back before the cover goes on, thus taking the place of the leather
of the cover in the tight back book. In the best binding this backing
extends over through or past the joint and onto the sides or covers;
and is also firmly attached, at the joint, to the leather of the back.
In the Newark library we use for this a thin soft muslin of the best
quality.

[Illustration: Showing Method of Attaching Tape Slips or Ends of Bands
to a Split Board Leaving a "French Joint"

From report of the Committee on Leather for Bookbinding. Edited for
Society of Arts. London: Bell & Sons, 1905.]

This description of the process of binding is a suggestive outline
only. Enough has been said, however, to show that the books sewn by
hand and fastened carefully to the cover as described will, if properly
made, wear much longer than a book bound by machinery, if bound as
above described. But, just as a machine properly handled can produce
paper of greater uniformity of thickness and of a quality superior in
many respects to the best hand-made paper, so the machines used in
binding can, if properly handled, bind books even more strongly than
can any save the most careful workman. The possible differences between
machine-made books can easily be noted in the cheap novels of the day,
which are poorly bound, and well-made law books and encyclopædias.
These latter are often faithfully put together and will stand almost as
much wear as any books ever produced.




CHAPTER III

=The Literary Side of Library Rebinding=


After satisfactory materials and methods of binding for a library have
been discovered and adopted, there still remain many questions which
can be well answered only by one having a wide knowledge of books. Nor
is a general knowledge of books alone enough to qualify one to answer
wisely these questions. Close acquaintance with the library's policy in
regard to book-saving and book-buying and of its attitude toward the
demand for popular and ephemeral fiction; knowledge of its reference
work; of the amount of handling its books receive by the public, and
of its financial condition and policy--all this and much besides the
person in charge of binding should have before she can make wise
decisions. And particularly she needs knowledge of paper, editions,
prices and similar matters.

Take fiction for example. More than half of the binding bills of most
free public libraries are probably chargeable to novels. One of these
comes to the hands of the person in charge of binding in such condition
that at the first glance it seems desirable to rebind it. Let us
suppose that it is still in publisher's cloth; is quite soiled outside,
but still fairly clean within; that the cover has parted from the book
in front; that several leaves are loose and two of them frayed at the
edges; that at the back the outside sheets of several signatures are
nearly worn through or broken; and that the label is off. Should it
be rebound; or what should be done with it? Before deciding its fate,
questions like the following must be answered.

If this is not the only copy of this book now in the library, are the
other copies in good condition?

If they are, can the library spare this copy because the demand for
this particular title is past? And is it not better economy to throw
it away or sell it--as it will probably never be wanted again--than to
spend money in binding it?

That is to say, if it is bound, will it not stand idle on the shelf?

If it continues to be somewhat popular, and this copy would get some
use if it were replaced, still, is it a book the use of which it is the
library's policy to encourage?

If not, has it not served its purpose and should it not be put away,
rather than entail on the library another expense item in cost of
binding?

If it is the only copy in the library, is it a book the library wishes
to retain or has it been in effect on trial, and has proved not to be
worth keeping?

If so, would not the binding of it be a use of money far less
justifiable than its original purchase?

Or is it perhaps of interest now simply as a part of the history of
fiction and so still worth keeping?

But, if kept for this purpose, does it need binding at all? Will not
a little mending make it hold together sufficiently well? Perhaps the
best plan would be to reclassify it for the literature section, wrap it
in paper, mark the wrapper, and put on the shelf.

If it is a good book, in constant demand, the question is still not a
simple one. Is it on poor paper, so poor that in our style of rebinding
it will last but a short time? If so, would not a new copy be a better
investment than the rebinding of this one?

If the paper is good enough for rebinding, will it stand mending and
further wear without making its ultimate binding very difficult?

If there are other editions of this book obtainable, does this sample
indicate that this particular edition is the best one to buy hereafter?

These and many other questions confront the librarian every time a
book, of any kind, comes up for binding. Because they are not wisely
answered the shelves of every library show examples of the unwise
expenditure of money. To take a specific example in this same field
of fiction. The library has several sets of Cooper. In each of them
is the Chainbearer. Consider any one of the library's copies of this
book: No one reads it. But mere shifting on the shelf gradually wears
it out. It goes through the bindery, and, being by Cooper, and a novel,
it is bound, in the same style as the Spy which happens to go with it,
in half leather. The Spy is used; the leather on it keeps soft and
pliable and wears a year or two, until the book is too dirty to keep
it longer. But the Chainbearer stands untouched and its leather hardens
and breaks. It must be bound again within three or four years, even
though it has not been lent once in that period. If it had received
a plain cloth binding, that binding would have cost less and lasted
indefinitely. If it had been thrown away the library would have been
the gainer.

The problem is not less complex when books in classes other than
fiction are up for consideration. Many of them are rarely used; why
rebind them at all, no matter how broken? To tie a string about them
or to wrap in paper and mark them would often be wiser economy. Often
they are single volumes from long sets, an edition, for example, of
some history bound about 1800. The binding is calf. In rebinding, to
match the set is very unwise, for all calf now on the market will rot
in a few years. It must be bound, let us suppose, as it is occasionally
called for; yet it will not, like a popular novel, wear out or become
unbearably dirty in a half century.

Shall it be put in morocco? This would be a mistake, for it is doubtful
if present-day morocco will last 50 years, probably not half that time.
The only alternative is cloth, and that with no leather title label on
the back. One of the best things is, for a large book, heavy duck back,
light gray or light green, lettered in printers' ink, with sides of any
good book cloth. This spoils the looks of the set. Moreover, the cloth
catches dust and dirt, and grows soft and flabby. But it is today one
of the few safe bindings. If the book is small, full art canvas or
imperial morocco cloth is better.

So, as I have said, paper, leather, cloth, sewing, joints, gold,
and many other things the librarian must know; and to these must
add knowledge of literary values, popularity of books and authors,
editions, prices and a score of other things before he can be sure, if
he ever can be sure, that he is really binding economically, in the
long run.




CHAPTER IV

=Binding Materials Suitable for a Library=


The Newark Library has tried many experiments in the choice of
materials. It finds that thin, imported, acid-free pigskin, first
used in this country by Mr. Chivers, is the best material for backs.
It wears well; does not rot; is easily manipulated and takes gold
lettering well. A disadvantage is its tendency to darken with handling.
It works well on books of all sizes and all kinds, whether they are
handled much or not.

Morocco, if tanned so that it will not rot, is more expensive than
pigskin. For the finer books it is better than pigskin as it preserves
better its appearance under much handling.

Cowskin is good for books which are to be much handled and are likely
to be worn out and discarded within five years. Only the best quality
should be used. Dark red is usually preferable to light red or brown.
It costs less than pigskin.

English Imperial Morocco cloth makes a good full binding for books that
are not to receive much wear. It cannot be lettered easily, and if much
handled soon looks dingy at the top and bottom of the back and along
the joint and at the corners.

Dark blue art canvas, the kind in which both warp and woof are dyed
blue, makes a serviceable and inexpensive full binding. It can be
recommended for books which are to be handled but little.

Large volumes like periodicals and society proceedings should have
backs of gray or light green duck, with black letters, and sides of art
canvas or morocco cloth.

Newspapers should also have backs of duck. The sides may be covered
with paper, but art canvas or art vellum is better.

If newspapers are to be consulted often they should be carefully
bound of course. But in a great many libraries it is wise to tie most
newspapers up in flat packages instead of binding them.

For the sides of books, bound with pigskin or morocco backs, which
are to be much handled the Newark Library has found nothing as good
as keratol, elsewhere described. For books which are not to be much
handled, morocco cloth is excellent. On books which are bound with
an eye to their beauty,--curios, rarities, books to be exhibited,
etc.--Newark uses three-fourths morocco with sides of paper or of cloth
of appropriate color.

The joint committee on printing of the House of Representatives,
Washington, D. C., made an investigation in 1907 of several binding
materials. This investigation was made with special reference to
the binding of the publications of the United States government. It
included the subjects of endurance, wear, tensile strength, tendency
to absorb moisture, readiness with which attacked by insects.
Incidentally other qualities were considered.

An outcome of this investigation was the publication by the Bureau of
Standards, Washington, of specifications for bookcloth for binding
depository sets of public documents. The specifications state that
the cloth shall be from first quality staple cotton, uniformly woven
and of the grade known as firsts. The surface shall be smooth and
hard and show no tendency to stick when folded upon itself. Further
specifications cover the strength of the material, its tendency
to absorb moisture, its resistance to mold and insects and other
characteristics.

These specifications may be used by all librarians in selecting cloth
for ordinary library binding. The Bureau of Standards will make tests
according to the specifications for any library, charging a fee for
the work. The cloth which conforms to these specifications is a smooth
cotton fabric similar to that used by the best law book publishers in
this country, and to the duck mentioned above. It is much heavier than
ordinary publisher's book cloth.




CHAPTER V

=Rebinding for Libraries=


Libraries differ as to bindings in their needs and in their
possibilities. Books differ even more. No library can or should exactly
follow any one style in its rebinding work. I add, however, the
following directions for ordinary, much-used 12mo volumes, in the hope
that they may be found suggestive. They should be read in the light
of all the rest of this book, and not taken as final authority at any
point.

Pull apart with great care. Remove all threads and old paste and glue.
Smooth out the backs by beating. Guard the outer and inner leaves of
all signatures that are broken or weak with paper or jaconet.

Loose pictures, if they are to be kept, put in with guards. Frequently
in rebinding the illustrations may be dropped with no loss either to
the reader's pleasure or the cause of art.

See that the leaves are all in and complete.

No. 1. Books sewed regularly, that is, not whipstitched. Guard
the first and last signatures with jaconet. If the title-page or
frontispiece is an insert, paste the guard along the insert and over
the first signature. This saves the labor of guarding the insert and
first signature separately.

Guard with jaconet the inner side of the inside leaf of every signature
that is at all worn or weak; if badly worn guard also the outer side
of the outside leaf. In some cases every leaf should be guarded. But
remember that guards thicken the back.

Make two sets of four-page end-sheets by folding once with the grain
pieces of lithographed lining paper; and two sets of waste papers by
folding once pieces of good book paper, about 60 lb. Guard the outside
of the folds of all of these with jaconet, and place one of each kind
at the front and back of the book, the lithograph one on the outside in
each case.

Use Hayes's standard linen thread of a weight adapted to the book.
The cotton thread used in book sewing machines wears well, but is
not recommended for hand-work. No. 25 is good for books with light
sections, 16 for those with heavy sections, and 20 for those with
medium. Sew the book on four stout but flexible tapes, each about a
quarter of an inch wide. Sew all along throughout.

Leave about three-fourths of an inch of tape projecting each side when
cutting off.

From here on the process is very similar for this kind of binding sewed
in the ordinary way, and for No. 2, whipstitched, which follows.

No. 2. Books which are whipstitched, being in such condition or of such
character that they have to be trimmed at the back, being then simply
piles of loose sheets.

Cut off as little of the backs as possible. Prepare and place end
sheets and waste papers as above described, except here paste the
jaconet guard only along one side, the outer, of the folds of all of
them. This gives firm hold for first overcast stitches.

Glue the back of the book slightly so that it may be divided into
signatures of a few leaves each which will hold together.

Sew on same tapes as for a regularly sewed book.

In overcasting or whipstitching do not take up more than one-eighth of
an inch for the deepest stitches. Make the signatures small and pass
the needle through two of them with each stitch, taking the stitch
diagonally.

Paste the lining papers to the waste sheets, all over, front and back.
Paste ends of tapes on top of lining papers. Trim the book, cutting it
as little as possible.

Glue the back slightly, and, when it is partly dried, round the
book and then back it. In backing do not break the threads or pull
them through the paper. This is especially to be guarded against on
whipstitched books.

After rounding and backing, glue to the back and over onto the sides,
passing beyond the jaconet guards, a strip of medium weight, soft,
bleached muslin.

Measure and cut the boards, which should be of good quality, adapted to
the wear the book is likely to have.

Cut the leather back, of pigskin. Do not pare it save slightly at the
edges. Put a little paste on the boards to make them stay in place, and
set them in place on the book.

Put on the leather, leaving the boards in place, tucking the leather in
at top and bottom,--head and tail.

When the leather is partly dried, the book having been kept under
slight pressure, cover the boards with keratol or appropriate cloth.
Make the corner fold by first turning the cover material in straight
across the corner and then bringing in the folds from right and left.

Paste the end sheets firmly down on the inside of the covers. This
fastens the book securely into its case. Press until thoroughly dry.

Letter in gold with large, rather heavy, black-face letters. Reduce the
lettering to as few words as possible.

No rule can be given as to the glue to be used. Let your binder be sure
that what he uses is good, whether the price he pays be high or low.
He can tell whether it is good or not by testing it. Glue pots should
be cleaned out frequently. Glue should be treated with judgment as to
heat and degree of thickness at which it is used. It is animal matter
that quickly changes its character and loses its strength under wrong
conditions.

The boards to be used in a book should depend, as to quality and
thickness, on the character of the volume they cover. Expensive boards
on a book which will probably soon be too dirty to be kept, are not
essential.

Neither strings nor tapes need to be laced into the boards on ordinary
library work. They hold well if carefully glued down on the inside,
and very well if pasted between two boards or into a split in one.

[Illustration: Plates

The first diagram shows in section a plate pasted on to a leaf of a
book. This method is faulty, because it takes up some of the back
margin of the leaf; if the leaf is pressed back the plate is apt to
split off.

The second diagram shows the method of attaching a plate by means of a
"guard."

From report of the Committee on Leather for Bookbinding. Edited for
Society of Arts. London: Bell & Sons, 1905.]

Some books are best bound with tight backs, some with loose. There
is no invariable rule in regard to this; it depends partly on the
thickness of the book. Very thick volumes should have loose backs,
usually.

It is usually wise to trim books when they are rebound. But this
trimming should of course be as little as possible.

[Illustration: Showing the Method of Lacing in the Slips or Ends of
Bands on a Flexible Bound Book

If depressions are cut in the board as shown, the slips can be left
with an adequate margin of strength without clumsiness.

From report of the Committee on Leather for Bookbinding. Edited for
Society of Arts. London: Bell & Sons, 1905.]

It is possible to whipstitch a book, even one which is printed on
stiff paper, in such a way that it will be almost as flexible and open
almost as easily as if it were sewed on tapes in the regular way. It
is possible, but difficult. Few have done it. Few binderies, if any,
in this country have workers who can and will give to the work of
whipstitching the care and thought necessary to produce a good job.

[Illustration: No. 1]

[Illustration: No. 2

Showing the Advantage of a "French Joint" over an Ordinary Joint

No. 1. A section of an Ordinary Joint with the board open shows that
the creasing of the leather is concentrated on one line.

No. 2. A section of a "French Joint" shows how this creasing is
distributed over a great surface, and so enables sufficient flexibility
to be obtained with much thicker leather than can be used with an
ordinary joint.

From report of the Committee on Leather for Bookbinding. Edited for
Society of Arts. London: Bell & Sons, 1905.]

Some strengthen the top and bottom of the back, the head and tail, by a
piece of cloth or tape passing over the back of the signatures and held
to them by the sewing in a manner difficult to describe.

[Illustration: Anatomy of a Joint

  A Board of cover.

  B B Bleached muslin, pasted over back after rounding and
     backing.

  C C Strings or tapes on which the book is sewn.

  D D End sheets of lithograph paper. The part at the left
     is pasted to the inside of the board and becomes the
     lining paper. B and C being pasted over on to D,
     when D is pasted to A they are carried with it and lie
     under the end sheet or lining paper.

  E E Jaconet or thin muslin guard pasted on D before the
     book is sewn.

  F F Waste papers of good book paper.

  G G Jaconet guard of waste papers. Before the book is
     trimmed F and D are pasted together and become a
     doubled fly leaf.

  H H The first signature of the book.

  J J Jaconet guard of the first signature.

  K K K Paths of threads.

  L Leather back.

  M Cloth or paper side.]

Music should be sewed regularly or all along and the inside and outside
sheets of all signatures should be guarded with jaconet. This guarding
of the inner sheets makes the binding stronger, as the inner pages of
a section always tend to work loose if much handled. The side and top
squares should be about 1/8 of an inch; but the bottom square about 3/8
inch. This large square at the bottom raises the book on the instrument
to allow the easy turning of leaves, as the pages frequently catch when
the squares are the usual size all around. Newark finds half pig with
Keratol sides very durable.

Large maps, drawings, etc., may be mounted on linen, jaconet, nainsook,
ordinary bleached, or unbleached muslin. The material used should
be five or six inches larger all around than the map to be mounted
for convenience in stretching and working. Tack the cloth on a clean
board, table or floor. Put the tacks very close together and tack the
selvage edge first. The surface may be covered with waste paper before
stretching the cloth on it. Apply a thin coat of thin paste all over.
When dry, paste the map and allow it to stand about ten minutes to give
it time to stretch. Lay the map on the muslin and rub it down under a
stout piece of paper. Thorough rubbing down is absolutely necessary
to make every part adhere. Proceed from the center outward, carefully
rubbing out creases and bubbles. Dry thoroughly before taking up.

One person alone cannot mount a very large sheet.

Very small maps in books which have become somewhat worn and creased
can be mounted on Japanese mending tissue. This paper is quite tough
and thin, and wears well.




CHAPTER VI

=Lettering and Numbering the Backs of Books=


Several methods of lettering the backs of books are in use in
libraries. The best is gilding. If this is well done with genuine gold
it will remain bright for many years, and will stand hard wear better
than any other style of marking. On leather this method should always
be followed. Only the best work in gilding is worth the money it costs,
and there is no substitute for gold that deserves mention.

Gilding on cloth by hand is rather difficult. It does not show well
on light-colored cloth, or on some dark colors. On some cloths, also,
gold titles become quite invisible in certain lights, probably because
of a certain combination in them of color and texture. Dark green is
often quite objectionable on this account, and the same is true of some
shades of red, in cloths of a certain texture. This difficulty should
be noted, and only those cloths used on books which are to have gold
titles on which the letters show well, at whatever angle the light may
strike them.

The process of gilding is described in books on binding. It costs
usually about two cents a line.

Black ink is very good for lettering on some kinds of cloth,
particularly on light-colored duck, canvas, buckram, whether cotton
or linen, and art vellum. The ink used should be "bookbinder's title
ink," made for the purpose. The letters should be large and heavy-faced
and not set very closely together. The method of applying the ink is to
pour some of it on a piece of marble and then to apply to the type with
a rubber pad. As the type is cold, considerable pressure is necessary
to make the ink take well. Black lettering costs about the same as
gilding, say, two cents per line.

Letters in gold are sometimes applied to books bound in cloth by
printing them on a very thin piece of leather and then gluing the
latter to the back. This method is also occasionally used on books
in leather. These leather labels can be stamped by machinery in
quantities, as is done for large editions by commercial binders, though
this is not practicable for the ordinary library binder. They usually
look very well when first applied; but it is not very easy to make them
hold permanently.

The better method in almost all cases is to letter directly on the
book, no matter what material it is bound in.

The binder should use brass type letters in most cases; they wear well
and give a clear impression. Ordinary printer's type will do excellent
work for a time. Brass type costs from 10 to 20 cents per letter,
common type from one to five dollars per font, according to size and
number of types. The best style for ordinary use is condensed gothic. A
heavy-faced Roman, like Jensen, is sometimes good, and on larger books
looks very well in capitals and small letters. Use as large letters
as the back of the book will permit. Reduce the number of words in all
titles to the lowest possible number.

Samples of type well adapted to lettering in gold on the backs of books:

[Illustration: Sample 1--Gothic condensed, 18 point.

  CARNEGIE PUBLIC LIBRARY
    Free for the people

Sample 2--Schoeffer, 18 point.

  CARNEGIE PUBLIC LIBRARY
    Free for the people

Sample 3--Lining condensed title, 12 point.

  CARNEGIE PUBLIC LIBRARY
    Free for the people]

Titles can be printed on paper also and the paper then pasted or glued
on. This plan is not at all satisfactory for books which are to have
much use, as the paper soon gets soiled and is very apt to peel off.

Many libraries have bound books in light-colored cloth, usually art
vellum, and then lettered them by hand with india-ink. The result is
not very satisfactory. The time taken in lettering them neatly is
considerable; the letters soon get soiled and illegible, and even if
very well done they look cheap and homemade. At the ordinary cost
of gilding, about two cents per line, hand lettering is almost as
expensive as gilding if the cost of the time spent on it is fairly
estimated. Then, to make them legible, the cloth chosen must be so
light in color that it soon shows the results of handling and becomes
dingy and disreputable. A dark cloth of the best quality and gold
letters pay best.

[Illustration: Type Cabinet]

On books bound in dark cloth or leather, numbers can be written in
white ink. Some librarians find this plan quite satisfactory. The
method is this: The place for the number being located, wash the
varnish away from it with a clean cloth, dampened with a mixture of
ammonia one part and water two parts, and allow to dry. Then write
the letters with a fine camel's hair brush, about No. 2 in size. When
thoroughly dry give the letters a thin coat of shellac. David's white
letterine is one of the best white inks. White ink is difficult to
manage and wears off soon if not very carefully put on.

Labels should always be put at least four inches from the bottom of the
back, the tail, that they may not be soiled or worn off in handling.
They should be marked with india-ink in large, plain figures. On many
books it will pay to have them gilded, as when thus put on they do not
detract from the book's appearance and look well for an indefinite
time. If labels are used, put them on as follows: The place for the
label being located, wash away the varnish from that place a little
with a clean cloth dampened with water and ammonia. If the book is thin
cut the label before it is put on, so that it does not quite reach
the edges of the back. If the book is so thin that there would not be
sufficient room for the book number on a label cut to fit it, place
the label on the upper left corner of the front cover. Press the label
tightly and evenly down until it sticks firmly all over. This is most
important. Use Dennison's round gummed labels. These, being round,
present no corners to be easily ruffed up. They are free from lines
around the border, so their whole surface is available for the book
number. They can be had in several sizes.

Lay out a scheme for marking books, and then make model labels to be
followed in marking fiction, classed books, reference books, juveniles,
magazines, etc., so that the same kinds of combinations of letters and
figures will always be written in the same way.




CHAPTER VII

=Pamphlets=


The subject of the care of pamphlets in a library does not come within
the field of these notes; but it may be proper to say that experience
and observation have led me to the conclusion that many pamphlets are
bound and entered in the catalog which are not worth the labor they
have entailed. How those should be kept that are thought worth keeping
I do not attempt to say. Often those kept are not worth keeping, and
still oftener those bound and catalogued are not worth binding. If
they are bound, the style of binding they should receive, if they are
in fact books in paper covers, is to be decided by the same rules as
is the same question in regard to other books. If they are in fact
pamphlets--a few pages with no cover, and must stand on the shelf and
will be little used, a cheap binding may be made thus: Take off the
cover; fold once a sheet of stout paper to the pamphlet's size; cut
two boards for covers, a little narrower than the pamphlet; paste them
to the paper mentioned about half an inch apart; paste a strip of book
cloth down the back and over the edges of the boards; paste the cover
to the boards, front and back; sew the pamphlet into the case thus
roughly made with stout thread through three or five holes along the
back (this last process is called stabbing); trim. This is simple,
strong and inexpensive.

If the pamphlet consists of one signature only the method just
described can be followed; but the sewing should be through the back,
a saddlestitch, with the knot inside. The binder's knot or stitch is
thus made: Having three holes for the thread, go first down through
the center one, back through one of the end holes, down again through
the other end hole, up through the center, and tie the two ends over
the thread which passes from end hole to end hole. With five holes the
process is similar and easily followed.

A very neat pamphlet binding, for pamphlets too large to be
saddle-stitched, is the following:

Cut two pieces of smooth, hard, "flat" paper the size of the pamphlet;
along one edge of each paste a strip of thin cotton cloth, bleached
muslin, about half an inch wide; lay one piece each side of the
pamphlet, cloth strips at the back, and sew the pamphlet through these
strips, close to the back, with three holes or five as seems advisable.
Make two end-sheets of two leaves each, the size of the pamphlet; guard
each with muslin; paste these to the first sheets, all over, one on
each side of the pamphlet; cut boards and paste them down on the outer
halves of the end-sheets (each end-sheet has now become, one-half the
lining paper for the cover, the other half, half of a double fly leaf);
put on a back of art vellum, leather or other material; paste on the
pamphlet's cover; trim. This binding is very strong, very neat, opens
quite easily and will wear well. The boards can be covered all over
with cloth, and the binding will then wear much longer.

Ballard's clips find favor with many librarians, for both pamphlets
and magazines. They hold things together neatly and securely, and hold
magazines into covers of cloth or leather quite effectively. They are
strips of sheet steel, of several widths, bent into about three-fourths
of a circle. Small steel levers fit into cleverly adjusted holes and
make opening easy.




CHAPTER VIII

=Magazine Binders=


It has long been one of the library traditions that magazines used in
the reading room should be put into stiff and heavy temporary binders
as soon as received, and so arranged, usually on racks holding them
vertically, that they can all be seen at once. It is now permitted
to doubt the wisdom of this proceeding. The binders are expensive;
the best of them soon get a worn and dingy look, even if they hold
together for a long time; the racks with their contents are usually
not ornamental and are often quite the reverse. The space taken by the
racks can ill be spared, especially when the area needed by browsers in
front of them is included. If the number of periodicals taken is quite
large the display space needed for them is quite out of proportion to
the use made of them. Recent back numbers of most journals, as well as
the last numbers, should be made accessible to readers, and for this
there is no provision in the vertical file arrangement. There seems no
better reason for exposing to the casual reader of the reading room the
full fronts of all the journals the library takes than there is for
making a similar display of all the books the library buys.

To the display of all journals on terrace tables most of the
objections just noted are also applicable. A careful consideration of
the relative value of current numbers of periodicals in a library and
of space, time and energy that should be put on their presentation to
the public, will lead one to the conclusion that the best way to handle
them is to lay them in alphabetical order on plainly labeled ordinary
book shelves wide enough to hold the larger ones, set about six inches
apart, that the numbers for the past six months may be kept together.

The thin journals which are most read, like "Puck" or the "Scientific
American," may well be slipped for a week into an inexpensive binder
like the one called "Cleveland" in the list which follows. Magazines
much read, like the "Century" and "McClures," can be so reinforced in
a few minutes, as described below, that they will keep quite neat for
several months.

This method is economical of space; keeps the journals easily in
one alphabetical series; makes six numbers accessible instead of
one; eliminates the question of binders; saves the assistant's time,
relatively to the service given to the public; and asks the public
simply to remember their alphabet and to read the shelves.

Binders that require the punching of holes through the backs of
magazines should be looked on with suspicion; though in spite of its
expense the binder of this type, with flexible metal strips in place
of strings and with polished sides containing actual covers of the
magazine within, has had much use. It wears well, is put on about as
quickly as any, exposes the date and name along the magazine's back,
and looks more attractive than any other binder when perched in rows in
vertical racks.

All other binders may be divided into three kinds: The Clip, the Bar
and the String.

The Clip is based on the Ballard clip idea. The Johnston is a good
example. A spring in the back grips the sides of the magazine and holds
the binder on. It tends to make a magazine less easy to hold open. It
pleases a good many.

The Bar has for its main feature one or more strips of steel, which run
down the back of the magazine and are fastened to the binder by a hinge
at one end and a hook at the other. Of all of this kind the best for
the money is, perhaps, the New Haven.

The String uses a string or elastic band to hold the magazine. In the
one called the Springfield, first used in Los Angeles in 1890, the
string passes through the magazine, between sections, and through three
holes in the back of the binder in a binder's stitch.

The Newark Library has tried many kinds of material for binders. Thin
book cloth soon wears out. Heavy and strong cloth soon gets soiled.
Full leather is very expensive, unless the leather used is light and
poor, and then it soon wears out. Good leather backs outwear sides of
any cloth. A Cleveland binder made for "Harper's Weekly," with heavy
cowskin back and keratol sides, was in constant use for 30 months and
looked well nearly all that time. It costs 70 cents. The few binders
now used in the Newark reading room are made in this style.

Covers of strong paper pasted to the outsides of single copies of
magazines to protect them during reading-room use or for lending, the
Newark Library has not found satisfactory. We reinforce the covers of
single magazines for this purpose as follows and find the method quite
satisfactory:

If the original cover is loose, take it off and paste on again
carefully. Line the cover with thin, white bond paper, pasted on all
over and lapping a half-inch onto the magazine itself. Press for ten
minutes in a copying press. Paste a strip of thin dark-colored book
cloth down the back on the outside. Put under moderate pressure until
dry. Write the name and date of the magazine on the strip of cloth with
white ink.

Sew large magazines like the "Ladies' Home Journal" into covers of
stout paper. A strip of paper an inch and a half wide placed in the
center of the section through which the magazine is sewed keeps the
sewing from tearing the paper.

Single copies of magazines can be bound for lending, at about 15 cents
each, in this manner: Take off covers; trim; remove table of contents
if it faces the cover; paste strip of strong cotton cloth down the
back, and extending about an inch over the sides; staple this on with
at least three staples in the same line with the staples which hold the
magazine together, or sew with stout thread through five holes; cut
covers as for an ordinary binding; paste them to the strip; cover all
over with art vellum; line covers with paper (this lining can be put
on all over as the first step in the process, and pasted to the covers
after they are on, thus forming the end paper); paste the front cover
of the magazine on the front in such a way that the date line down the
back comes on the back of the new cover. This is neat, convenient and
quite durable.

A few of the more popular binders are listed below. The material used
to cover them can be endlessly varied.

1. The New Haven Binder, designed by Mr. W. K. Stetson, Librarian of
the Public Library of New Haven. A solid back of metal. A metal rod
hinged at one end passes through the middle section of the magazine.
The free end of the rod is formed into a hook which, being slipped
under a metal loop attached to the back of the binder, holds the
magazine firmly in place. Costs from 85 cents to $1.15. A simpler
binder, also designed by Mr. Stetson and made on the same principles,
sells at 55 cents.

2. The Johnston Binder, made by William G. Johnston & Co., Pittsburgh,
Pa., has a round steel spring back which grips the magazine. Costs from
75 cents up, according to size.

3. The Boston Binder, made by the Office, Bank and Library Co., 157
Summer St., Boston. A rounded wooden back supports the binding device
which consists of two bars of steel pivoted at one end and fastened at
the other with a pin. Costs from 75 cents to $2.00 according to size
and material used.

4. The Torsion Binder, made by the Barrett Bindery Co., 180-182 Monroe
St., Chicago. Two flat steel wires are hinged to the binder at the top
and fitted with knobs at the free ends. These pass inside the magazine
and a slight pressure on the knobs sends the free ends of the wires
into an inclined slot. Costs from 95 cents to $4.50 according to size
and material used.

5. The Springfield Binder has a strip down the back of a simple cover
or case, with three holes punched therein through which the magazine is
laced in by strings. Shoe strings or tape may be used. Costs from 25
cents up.

6. The Chivers Binder, made by Cedric Chivers, Bath, England, and
Brooklyn, N. Y., is like the Springfield cover, but with a separate
flat brass rod around which the magazine is sewed into the cover.

7. The Weis Binder, made by the Weis Co., Toledo, Ohio, has metal
grooves in the back which hold the magazine.

8. The Buchan Binder, made by Buchan Mfg. Co., Newark, N. J., has a
steel back which consists of a hinge regulated by a screw. One or more
magazines may be kept in the binder. Good for magazines that are poorly
put together.

9. The Roedde Magazine Binder, made by the Flexible Back Looseleaf
Ledger Co., Buffalo, N. Y., varies somewhat from the Torsion and
Boston Binders, but is built on the same principle. Costs from $1.10
to $8.00.

10. Cleveland Binder, so called because much used in the Cleveland
Library. A simple cover or case in the back of which are holes half an
inch from the top and bottom; through these a piece of narrow elastic
is sewed. The magazine, opened at the middle of a section is slipped
under the elastic. Recommended for weekly journals.

11. Klip Binder, made by H. H. Ballard, Pittsfield, Mass. A simple
cover attached to the magazine by a pair of steel clips, put on with
keys. Price of klips, 50 cents per box of 10.

12. The Philadelphia Binder, made by G. D. Emerson, Philadelphia, Pa. A
rod passes through the magazine and springs into hooks at each end of
the back.




CHAPTER IX

=Repairing Books, General Rules=


The universal rule in this matter is, don't. To this there are
exceptions; but many if not most of the books which are repaired are so
injured by the process itself, or by the wear they receive after they
are repaired, that it would have been better for them if they had not
been repaired at all, but sent direct to the binder.

Librarians do not pay sufficient attention to book surgery.

All repairing of books should be done by skilled persons. The question
of whether or not repairs shall be made at all should be decided by
a person who has not only technical skill in repairing; but also
knowledge of the use to which the book in hand is likely to be
subjected. This, because in many cases it will be evident to a person
who knows about the use the books are to have that certain of them
should not be repaired at all, no matter if in quite a dilapidated
condition, with loose covers and loose leaves; but should be neatly
wrapped in good manila paper, labeled plainly on the back and set
again on the shelf. The few times in a year when little-used books are
wanted do not, in many cases, warrant their rebinding. Repairs on them,
no matter how well done, are likely to injure them. Books which are
rarely borrowed, even though they are used occasionally, or are even a
good deal handled because they stand near books which are much used,
should perhaps be mended a little; loose leaves should be tipped in, at
least. But work on them beyond that is often injurious.

The feeling that all books in a library should be neatly bound has
caused much unnecessary expense.

In most libraries of moderate size and in all large ones, there should
be a supervisor of binding and repairs; a person thoroughly familiar
with the whole routine of library work, familiar also with literature,
keeping close watch of the rise and fall in popularity of new books.
Such a person could say, for example, that the library's third copy
of the Valley of Decision and the fourth copy of the Crisis, if ready
for repairing or rebinding, could with good economy be placed on a
reserve shelf, not accessible to the public, there to be held until
the delivery desk assistants find a call for them. That is, she would
know that with two or three copies in good condition of these books in
circulation there would almost always be one in the library. When the
library's stock of such books as those named becomes reduced to one
sound copy she can then tell, from the demand for it, if it is wise to
bind one copy, or all; or if it is wise to do more than mend.

This omniscient person who has charge of binding and repairs, reports
to the head of the library that such and such books are past repairs;
that they will cost 35 to 50 cents apiece to be properly rebound,
and asks, "Will the library ever want them again?" If not, then she
will advise that they be given away and their cards removed from the
catalog. Or, if they must be kept for historical or religious or
superstitious or other reasons she will advise that they be neatly tied
up in paper, labeled, and put back on the shelf.

Knowledge of the art of mending implies not only knowledge of the
process of making a book by machinery and by hand; but also knowledge
of the different kinds of paper, how they wear, if they break easily,
if they will soon grow brittle, and the effect on them of attempts to
hold them with paste or glue.

Along with this knowledge should also go knowledge of the cost of each
individual book, and such knowledge of their use as will enable the
repairer to decide at once whether 10, 20, or 30 cents spent in repairs
will or will not pay.

As long as there are so few assistants who are at all familiar with
paper, type, binding, literary quality, popularity, cost, etc., it is
well to discourage almost all book repairs.

As soon as we admit, as we must, that a good book, costing from one to
two dollars, must be mended carefully if at all, we have opened the
door for a large expense. An assistant can easily spend an hour or two
on a book, repairing its cover, mending a few leaves and putting it in
order. When she gets through she will have put from 30 to 50 cents'
worth of time into it, has probably permanently injured it, and in a
few months or years it will be in worse condition than if she had never
touched it at all. Moreover, the same amount of money put out in cash
instead of time would in many cases have rebound it.

In a measure the remarks just made apply even to popular books, much
used by children or adults. It is easy to spend more money in mending
them than good economy can justify. Mend sparingly; rebind early.

The reason for this warning against mending lies in the anatomy of
the book and the injury it receives from handling after it begins to
break up, and especially after its first breaks have been mended by a
prentice hand.

The weakest point in a book is the joint. In publishers' binding of
today this joint is made by a piece of super, which is glued to the
back of the book and then to the inside of the cover, plus the end
paper which is pasted over it and also onto the cover. This super is
weak. If it is put on with a poor glue that glue soon grows hard and
the joint is further weakened thereby. It breaks or tears easily.
Also, it parts easily from the back to which it is glued and from the
cover. No strings or tapes pass from the book to cover. When the joint
once comes loose from either back or cover, or breaks, it cannot well
be either attached or mended again. It is sometimes possible to take
a broken book out of its case entirely, remove the old and attach
new super, add new end sheets, put it again into the case and get
considerable use from it. But any other kind of mending of the joint is
almost futile and even this is injurious. And the better such mending
seems at first to succeed, the greater the harm it is really doing to
the whole book. For the mending usually consists in pasting a strip of
strong paper or cloth along the joint. This simply conveys the strain
from the joint proper, where it belongs, to the first leaf of the first
signature. This is only paper, usually poor at that. It soon breaks
and lets its other half loose. Very commonly other injuries are worked
at the same time. The book gets loose again, if it was ever really
tightened. The super with hard glue attached rubs about on the backs of
the signatures; several of them are cut through, and the possibility
of a rebinding with proper sewing is either gone forever or can be
regained only after the long labor of mending many signatures.

When the cords or bands are broken in a book in which they are used it
is as useless to attempt to fasten book and cover together as it is
when the super gives way in publishers' binding.

Loose leaves appear earliest in books printed on paper which is so
heavy that it breaks almost as soon as it is folded. If the loose
leaves of such books are tipped in they tend to tear out with them the
ones they are tipped onto. Leaves should rarely be tipped into books
which have never been rebound. In rebound books which are in their last
days and will never be rebound again it is sometimes proper to tip in.

Full-page illustrations which come loose can in most cases be left out
to advantage. To tip them in again hurts the leaves they are fastened
to. They are usually so poor that it is a kindness to the reader to
throw them away.

In the long run a book needing more than very slight repairs will give
better return if so rebound at once that it will hang together until so
dirty that it will have to be thrown away.

Some books, especially some of those printed on cheap, heavy, coated
paper, will never pay to rebind. They should be mended, each according
to its constitution, and when beyond mending thrown away.

Good general rules for mending books are few. The first and most
important of all is: Be sparing with paste or other stickist. Another
is: If a machine-bound book is broken at the joint, the cover beginning
to part from the back, send it straight to the binder.

The best plan is to buy your books as far as possible properly bound
for library use direct from the publishers' sheets. Such books never
need mending or rebinding. Being flexible and easily opened their
leaves are rarely torn; and, for the same reason, getting no hard
pressure from moist or dirty hands in trying to keep them open, their
leaves keep clean for a long time.

Books not thus bound in the first place should be rebound in
first-class manner when they begin to break. Parsimony in rebinding is
a library thief.




CHAPTER X

=Repairing Books, Newark Methods=


Books are sent to the bindery and repair department from the delivery
department, as the head of the latter department may direct; and the
head of the bindery department, or some one under her direction, is
constantly looking over the shelves for books that need attention.

In the repair department, which attends to the repair of books and to
the sending of those needing binding to the bindery, these directions
are followed:

When a book looks dilapidated, note carefully its condition throughout.
Consider these questions in regard to it: Is it worth repairing? Should
it be covered? Should it be rebound? Should it be discarded? No general
rules can be given by which to answer these queries. Each case must be
decided by itself.

=General cleaning.= Look through book; turn out corners of leaves which
have been turned in; mend torn leaves with transparent mending paper,
or Japanese mending tissue; erase dirt and pencil marks.

=Pencil marks.= For removing soil and pencil marks, we have tried the
Ruby, Cerise, and Ideal erasers, Art gum, and ivory soap and water. We
like the Cerise, manufactured by Eberhard Faber, as having more grit
than the Ruby and yet not injurious to the paper.

=Torn leaves.= Ordinary circulating books are best mended with narrow
strips of Japanese tissue and paste. This is cheaper than commercial
gummed paper and is preferable to it also, as the mucilage on the
latter grows dark and brittle in a short time. Dennison's adhesive tape
costs about three cents for a roll of four yards, while one sheet of
Japanese tissue, costing two and a quarter cents, cuts into 46 yards of
strips the width of Dennison's.

Torn leaves in choice books may thus be mended: Match the edges of the
tear carefully and apply a narrow line of paste along them. Lay over
this a piece of Japanese tissue larger than the tear, and rub it down
very lightly. Repeat this on the other side of the leaf and put under
moderate pressure. When dry, pull off all the tissue that will come
away easily.

=Cleaning publishers' bindings.= Often there are a few spots on books
which make them unsightly. It is not advisable to wash a cloth cover,
unless very dirty, as the finish is thereby removed, thus permitting
the book to become soiled again almost with first handling. In case,
however, a publisher's cloth binding has become so soiled as to need
washing, it can be very well cleaned and given a new finish by the
process described below. If the directions are carefully followed books
treated in this way will look almost new and will keep clean almost as
well as they did when they came from the publishers' hands:

Hold the book by the leaves in the left hand, with the covers outside
of fingers and thumb; rub the cover gently with a sponge dipped in
a mixture of vinegar and water, half of each. Continue to rub it
carefully until it is quite clean; but do not press hard enough or rub
persistently enough to take off any of the color. Rub gently, slowly
and carefully, letting the vinegar and water do most of the work. When
thoroughly clean, or as clean as the character of color and cloth will
permit the book in hand to be made, stand it on end to dry. The drying
will take at least a half hour; a good plan, consequently, is to clean
as many books at one time as one can do in about forty-five minutes.
The first one cleaned will then be ready for the next step when the
whole lot has been finished.

In a common drinking glass, place one teaspoonful of egg albumen, to
be had at any book bindery, and two teaspoonfuls of vinegar, add half
a glass of water and let this stand over night. The next day, add two
teaspoonfuls of binders' paste, stir thoroughly, and it is ready for
use. With a sponge give the cleaned books one coat of this mixture and
again stand on end to dry. This mixture will not make the covers as
shiny as does shellac or varnish, but will cover the surface well and
protect it. It will be sticky when first put on.

=Leather decay.= Leather bindings which show signs of decay may be
treated to an application of vaseline or olive oil, or a solution of
paraffin wax in twice its weight of castor oil, slightly warmed. Rub
in well with fingers or cloth. The progress of decay can in some cases
be stopped by this means.

=Labels.= Take off and replace with fresh ones all torn and badly
soiled back labels. To do this, apply to them a mixture of two parts
water and one part ammonia. After they are soaked enough to come off
very easily, take them off with a dull knife. In most cases let the
water remain on the label for several minutes. To scratch off the label
without soaking it first will often injure the book. Labels that have
been varnished are sometimes very difficult to remove and great care
should be exercised with them.

=Replacing labels.= Follow method used in putting them on when book is
new, except that it is not necessary to moisten with ammonia and water
the place on which the label is to go. Use Dennison's round gummed
label, of a size small enough to rest entirely on the back of the book.
Never let a label extend over and around the edge of the back. For
quite small books trim the label. Moisten the gum slightly and press
and work it down carefully until it has set all over. This is very
essential. Mark the book with indelible ink. Cover label with quite
thin white shellac. The shellac should extend a little onto the book
beyond the label all around. Let the first coat dry thoroughly and then
apply a second.

=Labels on the sides of books.= If the cover is durabline or keratol,
first put a coat of shellac on the place where the label is to be
placed. Allow this to dry. Paste and put on the label, rubbing it down
thoroughly. Allow it to dry and give it a coat of shellac. If the cover
is cloth, use ammonia and water instead of shellac before putting on
the label.

=Loose leaves.= If the loose leaves are illustrations in an ordinary
novel, take them out and send them to the picture department. Replace
other pictures with a guard of Japanese mending tissue. This tissue
takes up less space than bond paper and must always be cut with the
grain of the paper or it cannot well be handled. Rub the tissue down,
first laying over it a piece of paper.

=Single leaves can be inserted in three different ways=:

1. Fold half-inch strips of bond paper in the center lengthwise along
the grain. With a small brush apply paste to the outside of this strip.
Attach half of it to the edge of the loose leaf and the other half to
the adjoining leaf, close in by the fold. Cover the strip with paste
evenly, but sparingly and quickly, stretching it as little as possible.
If it does stretch, and it tends to do so as soon as moistened, it will
when dry wrinkle the page to which it is attached. Loose leaves should
be attached in this way only in books which are in good condition.

2. Draw a soft piece of twine over a board which has received a thin
coat of paste; then pull this cord through the back of the book where
the loose leaf is to be inserted. This leaves in the book just enough
paste to hold in the loose leaf. Work the loose leaf carefully back
into its place, close the back and let it dry. This method is not
advised for general use.

3. On the back edge of the loose leaf put a little paste. Lay the leaf
in place and close the book for a second, then open and push leaf in
place with folder. This method is used with whipstitched books.

The first two methods are generally used with books sewed in the
ordinary way on tapes or cords.

=Sewing in loose sections and loose leaves.=

=1. Loose back books.= Thread a darning needle three inches long with
Barbour's linen thread, No. 40, or Hayes's linen thread, No. 20. Open
the book in the middle of the loose section. Near the top and bottom
of the fold will be seen holes made by the binder. Pass the needle
through a hole near the top, and out between the book and its loose
back. Do not pull the thread clear through. Drop the needle and thread
between the back of the book and the loose part of the binding to the
bottom, then run it from the outside into the middle of the loose
section through the hole at the bottom thereof, and tie at the point of
beginning. Insert Japanese guard over thread. This holds the section
in fairly well. Always guard a section before replacing by pasting a
half-inch strip of bond paper, folded in the middle, along the folds.

=2. Tight-back books.= Cut a guard of jaconet or bond paper
three-fourths of an inch wide and as long as the book. Sew the
signature to the middle of this guard and then paste the guard in the
book, attaching half of it to each of the leaves adjoining the loose
section.

=Broken bindings.= Books in publisher's cloth, which are breaking out
of their bindings, are mended in some libraries with considerable
success as follows:

The case is taken off with care. If possible, the lining of the boards
is removed in such a way as to permit of its being put on again. The
super is removed from the margins of the boards and from the back.
Necessary repairs are made to end leaves and stitches are taken in the
book when out of the case, if need be. The back of the book and the end
leaves are then covered with a thin coat of flexible glue. The book is
then again put together. This glues the back of the case directly to
the back of the book, making it a tight back. It is reported that books
thus repaired wear very well. Newark has not had success with this kind
of work.

=Fly leaves and end papers.= To add a new fly leaf. Cut suitable paper
just the length of the leaves of the book but half an inch wider, fold
over the half inch and paste it; attach this half inch to the last fly
leaf in the book, close to the joint.

If a book has two or more fly leaves, very often you can save much time
and still have your work look well by turning the first leaf back and
pasting down the page facing.

If leaves stick out of book after they have been tipped, guarded or
sewed in, trim them off even with the others.

If the end sheet or lining paper of the cover is soiled or injured, cut
a sheet of suitable paper to fit the lining paper exactly and paste
the new sheet down all over, fully covering it.

After the new lining paper is put in, keep the book for a time under
moderate pressure or the cover will curl.

=Loose joints.= If books are loose along the joint they can sometimes
be repaired by pasting along the joint inside as a guard a strip of
thin muslin or bond paper, an inch and a quarter wide. Fold the strip
through the center, paste it and apply it to fly leaf and book cover. A
better material than muslin for this purpose is jaconet, being light in
weight and starched a little. The book should lie open and flat after
mending until it is dry.

This, as has already been noted, is a poor method of mending a broken
joint. By it the strain is passed from the cover through the new joint
to the fly leaf, and the strength of the new joint is only the strength
of the fly leaf itself, which is generally a poor piece of paper. A
better way, in some cases, is to take the book entirely out of its
cover, pull the super from the back, sew on new end sheets and glue a
new piece of super or muslin over the back and extending half an inch
onto the sides. Let this dry thoroughly. Then cover with paste the back
and the end leaves, the latter being the sheets which are now to become
lining papers, and put the book again into its case. This is recasing,
in effect, in the manner in which the book was first put together.

=Loosened back.= A book which is in fairly good condition, with sewing
protected, but loose in the case, can sometimes be strengthened by
applying paste or glue down the inside of the loose back of the cover.
This can be done fairly well with a long handled brush. This changes
the binding from a loose to a tight back.

=To reattach loose covers.= The method here described should be applied
only to books which are little used. Cut a strip of muslin the length
of the book, and about an inch and a half wider than its back. Apply
hot binder's glue to it and put it over the back on the outside. When
this is dry, cover the book with brown wrapping paper as described
under the heading "Covering books," as a book thus mended is quite
unsightly.

When a book is out of the cover, but has its sewing intact and the
super or paper over the sewing firmly in place, it may be wise to give
the back a coat of hot glue and put book again into its cover, thus
making it a tight back.

=Covering books.= Cut brown Rugby wrapping paper into sheets of such a
size that they will extend from 2 to 2-1/2 inches all around beyond the
book when laid open on them. This size will be found to be nearly 13×17
inches for the ordinary 12mo. Lay the closed book on the paper with
back in the center and toward you, making sure that the proper margin
of paper is left all around. Fold the paper over the front edge of top
cover; reverse book, this time with front edge toward you, and fold and
stretch paper tight over the front edge of the cover. Take book by the
back in the left hand. With scissors cut the paper at top and bottom,
with slight inward slant from its outer edges down to the four ends of
the joints. Take out the book, and turn in these center flaps with a
double fold, putting a little paste on them after first turn. Replace
the book in the cover, flush with head and tail. Tuck in folds at the
corners of the front and back lap, making not too great an angle;
crease well. The top and bottom laps should lie over the front and back
laps. Put a touch of paste on laps at corners, but do not put any on
the book itself.

=Re-siding books.= Books in good condition as to their bindings, being
still solid, but having badly worn or badly soiled sides, send to
bindery to have the covering of the boards, not the leather of the
back, taken off and replaced with fresh keratol. This costs about 10
cents per volume. This can also be done in the repair department, and
book cloth can be used instead of keratol.

=Soiled edges.= The edges of soiled books can be somewhat improved by
rubbing them with sand paper.

=To cut fore edges of bound book.= This is never done to a book of
value or to one that can be rebound; but cheap, shabby books with sound
leather backs which hold together well can be freshened by cutting the
fore edges and, if necessary, residing. Sometimes one can cut straight
down through the front edges and the two boards, reside and insert
new end pages. This seems a barbarous process; still, it freshens the
appearance of the book very much and often prolongs its usefulness.

=Maps.= When small folded maps are badly torn line them throughout with
Japanese tissue, jaconet or nainsook.

=To freshen black leather.= Sponge off with ordinary black ink; dry;
rub over with paste; dry; apply a coat of bookbinders' varnish; dry;
rub with vaseline.

=Broken boards.= Books which have one or both of their sides broken,
but are otherwise perfect, can have their boards replaced. Do not do
this to books in publisher's binding, as such books will soon have to
be rebound in any case.

On a book which is hand sewn, with leather back, a broken board can be
replaced thus: Pull off the cloth side, lift up the leather carefully
where it laps over the side, also the muslin on the inside and pull
out the broken board. Put hot glue along both edges of new board to be
inserted, and put in place. Rub down well, and put under pressure, then
reside and insert new end leaf.

=Ink stains.= These if on the leaves can generally be removed with ink
eradicator or javelle water; but if they are on the edges and have
soaked down into the book, nothing can be done but to cut the edges and
have the book rebound. If the stains on the edges have not soaked in
very deep, sandpaper can be used on them with good results.

Ink stains can be removed from Keratol by applying to them household
ammonia of full strength with a small bristle brush, working it over a
little to loosen the ink. Allow this to stand a minute or two and then
rub with soft cloth and wash well with water. This cannot be done with
imperial cloth, as ink sinks into its fiber.

=General stains.= Many brown stains can be removed with a strong
solution of washing soda, or better with javelle water. Wash with clear
water and dry thoroughly after removing the stain or a dark line will
later appear at the edge of the spot which was wet; put in a press with
clean papers between the leaves. Alum and water also give fairly good
results. Water and a little ivory soap will remove some finger marks.
All of these methods have the disadvantage of removing the size or
finish in the paper so that it soils quickly again.

=Grease marks.= For spots made with grease use benzine; while still
moist apply a hot iron, with a blotting paper on each side of leaf.

=Paste.= Paste must not be used if not in a good condition. The
thickness at which it should be used varies with different kinds of
work. Thin paste is quickly taken up and under its application paper
quickly expands. In most cases this stretching or expanding of the
paper is a disadvantage. If it is desirable that the paper be so
applied as not to draw or curl that to which it is applied, it should
be covered quickly with thick paste, then applied at once and not much
rubbed after it is in place.

The dishes in which paste is kept should be thoroughly and often
cleaned; brushes the same. Bits of cloth used in pasting should either
be thrown away or washed after they have been used a short time.




CHAPTER XI

=Repairing Books: Materials and Tools=


In spite of the remarks heretofore made about the injury often done to
books by repairing them, even when the repairs are cleverly made, it is
well for any library, however small, to have a mending table at which
such work on books as seems necessary can be done. The materials for
this work can in part be obtained from a bindery. There one can get
super, pieces of book cloth of several colors, and some of other things
mentioned below and in the list of technical terms. One needs for book
repairs some or all of the following things, according to the amount of
work to be done.

=Brushes.= Buy a small brush, about as large as a lead pencil, and
another half an inch in diameter. Their prices vary with their quality,
from 6 cents up. These will be sufficient for most purposes. Get good
ones; and for paste and glue the kind set in cement, not in glue.
Artists' bristle brushes are good.

=Cloth.= A yard or two of super. This is stiffened a little and pastes
and handles more easily than ordinary muslin. If you are going to put
backs on books you will need also pieces of bookbinder's cloth. These
can be bought at almost any bindery in yard lengths. Get also pieces
of cambric and fine muslin called nainsook, or jaconet, for guarding
signatures and similar work. It costs 15 cents a yard.

=Copying press.= For pressing books. One 10×12 inches will cost about
$3.75.

=Cutting board.= The best cutting board is one of hard wood. A common
bread-board will serve for small work and costs only a few cents.

=Folder.= Flat piece of bone. 15 cents.

=Glue pot.= Get the regular double pot of iron. A No. 2 will cost about
75 cents.

=Ground glue.= Best, 18 cents a pound.

=Gummed paper.= Paper and cloth ready gummed and other useful repair
material can be bought of Gaylord Bros., Emerson Building, Syracuse, N.
Y., and also of Holden Patent Book Cover Co., Springfield, Mass.

=Japanese mending paper.= Handmade Japanese Window or Shoji Paper used
for mending and guarding can be obtained from Japan Paper Co., 34 Union
Sq., N. Y. Price $5.00 per ream of 500 sheets 16×22. This is the best
of all mending papers for repairing torn leaves.

=Knife.= A good knife is what is called a shoemaker's knife, a
long blade, square at the end. 15 cents. Keep the corner square by
occasionally knocking a piece off the end. For a sharpener wrap a piece
of fine emery paper about a square stick and tack it down.

=Mending tissue.= See Japanese mending paper.

=Needles.= Several sizes, especially the regular sewing needles of the
binder.

=Paper.= Different kinds of book paper, to be obtained from any
printer, will be needed for replacing end sheets, also thin bond paper
for guarding leaves. Rope manila of the best quality will also be
found useful. Get also some of the rolls of adhesive paper sold by
The Dennison Manufacturing Company, 11 Dey St., New York (3/4 inches
wide, per dozen spools 40 cents), for mending torn pages. It is very
convenient.

=Paste.= Buy this at a bindery, if you use much. For occasional use
it can be thus made: stir flour in cold water until smooth, add hot
water, let it boil for a few minutes, and add a little salt and alum as
preservatives. Good paste can be bought in jars. Higgins's is the best.
The cost is 25 cents per 8-ounce jar. Almost any stationer carries it,
or it can be ordered of Charles M. Higgins, 168 Eighth St., Brooklyn. A
convenient thing for paste in small quantities is the tube. The several
makes are all about equally good.

Paste made of starch is best for work on fine books, as it is more
transparent and shows less than other paste.

=Ruler.= One with a brass edge is handy, but not essential.

=Scissors.= Slender, 6-inch blades, good quality, 75 cents.

=Sewing bench.= This can be made as follows: Take a board 24 in. long
and 10 in. wide. On the side of it and 14 in. apart nail two uprights,
3/4 in. square and a foot long. Across the top of these nail a stick
3/4 in. square. Tacks can be driven into the board and into the cross
stick above where needed, and cords or tapes stretched between them.
This gives you all the essentials of a sewing bench.

=Thread.= Some of Hayes's best Irish linen thread, smaller size, say
No. 18. Or Barbour's linen, No. 30.




CHAPTER XII

=Covering Books=


Few libraries now cover their books. The reasons for covering them
usually given are, that the paper covers gather dust less easily than
do the publisher's cloth bindings; and that the paper covers can be
renewed when soiled and books can thus be kept at small expense fairly
clean as to their exteriors.

The objections to the paper cover may thus be stated: It takes away
the individuality of the book and thus detracts from its interest; the
cover has a tendency, unless very carefully put on, to strain the back
of the book; borrowers are more careless in handling a covered than an
uncovered book.

The only use the Newark Library has found for book covers is on old
volumes which are very rarely used and yet are too broken or too much
worn and disfigured to look well on the shelf. Frequently old leather
bindings crack along the joint so that the sides separate from the
back. When this occurs a piece of muslin covered with hot glue applied
to the back of the book, extending onto the sides, will hold it
together fairly well, and then a paper cover hides the defacement.

The process of putting on a paper cover is described in the chapter on
Repairing.

The Newark Library has experimented with several materials and at this
date has found that Rugby wrapping paper has given better satisfaction
than any other. It is a tough brown paper, which can be obtained from
Lindenmeyr & Sons, New York. Cost, $3.30 per ream; size, 24×36, 60 lbs.

The arguments for covering books used in schools are somewhat different
from those that may be applied in regard to the same practice for books
in libraries. The Holden Patent Book Cover Company, of Springfield,
Mass., makes an adjustable cover of very stout, water-proof paper. This
cover and others akin to it are used to a great extent in the public
schools.

The same Holden Company publishes a little pamphlet called, "How to
Care for Books and Keep Them in Perfect Repair." This they present to
teachers who make use of their appliances for repairing books. These
appliances include thin transparent paper glued on both sides; the same
glued on one side; polished cloth in several colors glued on one side;
paper in long strips, so folded and glued that they can be conveniently
used to strengthen and repair bindings; self-binders, which are strips
of glued cloth with little tongues cut out and projecting from them,
that may be used to hold cover and book together.

It appears that in schools which purchase materials like those made by
the Holden Company, and instruct their teachers to use them on books
as soon as any of them show the need of repairs, the annual cost of
text-books is reduced. Probably the cost would be still more reduced
were the books mended very little by a skilled person, and were they
properly rebound as soon as they need to be.

Gaylord Brothers, of Syracuse, N. Y., make and sell repair material
similar to that of the Holden Company.

Further light is thrown on this subject by certain answers to questions
recently received from forty superintendents in the United States.
These answers show that in two only of forty cities where text-books
are furnished is any systematic attention given to the care of
text-books. In two cities there is an official curator of books who
looks after the covering, repairing, and rebinding of them.

The custom in public schools seems to be to purchase text-books, to
keep them in use with a minimum of repairs until they are too tattered
and soiled to be thought respectable even by the most careless teacher,
and then throw them away. This practice is probably wasteful and
extravagant; at least it seems to be so in the light of the experience
in libraries in the same matter.




CHAPTER XIII

=Leather: General Notes=


The names given to different kinds of leather come sometimes from the
character of its surface, that is, from the "grain," or roughness
or corrugation it has; sometimes from the animal it once covered;
sometimes from the method of tanning; sometimes from the fact that it
is part of a skin which has been split; sometimes from the place or
country where it is made or where the animal it once covered lived, and
sometimes from a combination of two or more of these.

The subject of the leathers used in bookbinding is a very difficult
one. Tanners, dealers and binders, dictionaries, encyclopædias and
books on tanning disagree with one another as to the proper terms to
use in speaking of different kinds of leather. Imitations are many, and
very successful. In the list below I have tried to follow the usage of
binders; but I am sure no expert would accept it throughout as correct.

With this variety in definition goes a corresponding variety in
character in leather of the same name. Different skins tanned in the
same way, apparently, and called by the same name by dealers and
binders, will wear, some well, some not so well. The only quite
definite assertion which can be made is, that of modern leathers, few
save the best morocco and pigskin will keep their strength for any
length of time in an American library, and morocco and pigskin usually
for not much over 20 years.

As the remarks which follow indicate, English leather makers have
recently procured leathers guaranteed to be dressed on the lines
recommended by the Society of Arts Report. See also the revised report,
and the little volume, with samples, called Leather for Libraries by
Hulme, Parker and others.

Leathers made from the skins of animals of the same kind, the goat
for example, though made by the same process, vary somewhat with the
animals' sex, age when killed, the food on which they lived, the
climate in which they matured, and their manner of life, and, if
females, with the fact that they have or have not had young. Also, the
leather made from the skin of one part of the body differs materially
from that made from the skin of another part.

Moreover, some dyes seem to hasten decay, some to retard it. Red seems
least hurtful, black the most so; though this difference is probably
due more to chemicals used in the preparation of the skin for the dye
than to the dye itself. Brown generally stands well; most other colors,
except red as stated, do not.

With all these, and other, factors to be taken into consideration it
is evident that full knowledge of leather is not given to anyone. In a
general way it may be said that good leather cannot be told by name,
or looks, or feel; but only by trial. Dealers, even, cannot tell the
good from the best.

The sum of all advice is, having found, by your own or others' tests,
that a certain leather is good, use it as long as you can get it. The
British museum sets a good example in this. It has in recent years
bound many thousands of volumes in morocco made by Meredith-Jones &
Sons, Wrexham, Wales, which experience thus far shows to be very good.
We have tried it and in the brief trial we have given it, found it
excellent.

Dr. J. Gordon Parker, Herold's Institute, Drummond Road, Bermondsey,
England, has made an arrangement with the council of the Library
Association of England by which he has become their official examiner
of leather and he will test samples for acids, nature of tannage, etc.,
at reasonable rates.

John Muir & Son, tanners and curriers, Beith, Scotland, offices: 3
Arundel St., Strand, London, W. C., England, prepare pigskin for
bookbinding; so do Edw. & Jas. Richardson, Elswick Leather Works,
Newcastle-on-Tyne, England.

J. Meredith-Jones & Sons, Ltd., Cambrian Leather Works, Wrexham, Wales,
make bookbinders' leathers guaranteed to be dressed on the lines
recommended by the Society of Arts Report, and free from mineral acids.
Specialty: Welsh sheep.

Much has been written on the wearing and lasting qualities of leather.
The best discussion of the subject is the Report of the committee
on leather for bookbinding, made to the Society of Arts, England,
and published in its Journal, July 5, 1901. I allude to this report
frequently, and for convenience speak of it as "Report '01." The
committee who made this report found that the leather made today does
not last as long as that made 75 years ago. They found that the heat
and fumes of gas help to hasten the decay of the leather on books.
These factors are more effective in American superheated libraries
than in English ones. If books bound in leather are much handled they
last longer than if they stand undisturbed on the shelves, because the
oil from the hand helps to keep leather soft, pliable, and alive. The
committee concluded that no leather, with the sole exception of Niger
goat, made by the natives on the river Niger in Africa, and imported
just as it leaves their hands, can be fully recommended as free from
elements which lead to its early decay. Since this report was published
imitations of this leather have been put on the market, and it can no
longer be relied upon. We have found it beautiful in color and texture,
easy to work and wearing admirably on large and much-used books. But
it does not keep clean as well as a good morocco of coarse grain. It
is very expensive, and first-class morocco is probably better where
strong, enduring leather is advisable which is only on books which are
to be much used.

The most important points made in the report of the Society of Arts
committee on leather for bookbinding, referred to above, are the
following:

Books bound during the last 80 or 100 years show far greater evidence
of deterioration than those of an earlier date. Many recent bindings
show evidence of decay after so short a period as ten or even five,
years. Modern leather is certainly far less durable than old leather.

The most prevalent decay is a red decay, and this may be differentiated
into old and new, the old red decay being noticeable up to about 1830,
and the new decay since that date.

Another form of deterioration, more noticeable in the newer books,
renders the grain of the leather liable to peel off when exposed to the
slightest friction. This is the most common form of decay noted in the
most recent leathers.

Decay is caused by both mechanical and chemical influences. Of the
latter some are due to mistakes of the leather manufacturer and the
bookbinder, others to the want of ventilation, and improper heating and
lighting of libraries. In some cases inferior leathers are finished (by
methods in themselves injurious) to imitate a better class of leathers,
and of course where these are used durability cannot be expected. But
in the main the injury for which the manufacturer and bookbinder are
responsible must be attributed rather to ignorance of the effect of the
means employed to give the leather the outward qualities required for
binding, than to the intentional production of an inferior article.

Embossing leather under heavy pressure to imitate a grain has a very
injurious effect.

The shaving of thick skins greatly reduces the strength of the leather
by cutting away the tough fibers of the inner part of the skin.

The use of mineral acids in brightening the color of leather, and in
the process of dyeing, has a serious effect in lessening its resistance
to decay.

Quite modern leather dyed black seems, in nearly all cases, to have
perished, although old black morocco (sixteenth, seventeenth and
eighteenth centuries) in good condition is not uncommon.

In a very large proportion of cases the decay of modern sumac-tanned
leather has been due to the sulphuric acid used in the dye bath, and
retained in the skin.

Tobacco smoke has a darkening and deleterious effect on leather
bindings.

Light, and especially direct sunlight and hot air, possess deleterious
influences which had scarcely been suspected.

Gas fumes are the most injurious of all the influences to which books
are subjected, no doubt because of sulphuric and sulphurous acid they
contain. They are especially injurious to books on the upper shelves of
a high room.

The importance of moderate temperature and thorough ventilation of
libraries cannot be too much insisted on. With proper conditions of
ventilation, temperature, and dryness, books may be preserved without
deterioration, for very long periods, on open shelves.

On the other hand, as a general rule, tightly fitting glass cases
conduce to their preservation.

Leather bindings that have been coated with glair or varnish seem to
keep better than those without.

The bookbinder shares, in no small measure, with the leather
manufacturer and librarian, the blame for the premature decay of
leather bindings.

Books are sewn on too few and too thin cords, and are not firmly laced
into the boards. This renders the attachment of the boards to the book
almost entirely dependent on the strength of the leather.

The use of hollow backs usually throws too much strain on the joints in
opening and shutting the book.

If the headbands are not strong the leather of the back is apt to
become torn.

The leather is often made very wet and stretched a great deal in
covering, with the result that, on drying, it is further strained,
almost to breaking point, by contraction, leaving a very small margin
of strength to meet the accidents of use.

The use of oxalic acid for washing backs of books, or of leather for
bookbinding, is fatal to durability. Vinegar, even in its pure state,
is injurious.

Paste should be used in a fresh condition, otherwise it is liable to
undergo an acid fermentation, and to favor the growth of injurious
moulds and bacteria.

In all contracts and specifications for bookbinding, the use of East
India-tanned goat and sheep, whether retanned or not, should be
absolutely forbidden.

It appears to be the general opinion that leather, and especially
Russia leather, lasts better on books that are in constant use. This is
attributed to the slight amount of grease absorbed by the leather from
the hand, and it is suggested that possibly a suitable dressing may be
discovered which would have a similar effect to that produced by this
grease.

While the leather now used for binding books is less durable than that
employed 50 years and more ago, there ought to be no difficulty in
providing leather at the present time as good as any previously made.

It is possible to test any leather in such a way as to guarantee its
suitability for bookbinding.

A reissue of the report summarized above was published, in cloth, in
1905. It is entered in the list of books at the end of this volume.
In this reissue the arrangement of the original report is somewhat
modified; a paper on leather dyes and dyeing has been added; the report
of the scientific sub-committee has been practically rewritten; many
illustrations have been added, some of them colored; 12 samples of
leather prepared in accordance with the committee's conclusions are
inserted; and the volume is handsomely printed, and bound in cloth.
The reissue, however, does not make necessary any change in the above
summary.




CHAPTER XIV

=Paper and Paper Making=


Much of the paper used in books today is made of wood. Wood is
converted into paper-making material in three ways. In one, it is cut
into convenient lengths, stripped of its bark and finely ground on
grindstones, and bleached. The product is called ground wood pulp.
The paper made from this pulp is hastily and cheaply put together,
has little strength, and soon turns yellow and grows brittle. There
is often added to ground wood before making it into paper, more or
less sulphite or soda pulp, usually the latter, the product of another
process of turning wood into paper-making material.

In the sulphite and soda processes the wood is freed of bark, cut into
small pieces, and reduced to a pulp by being heated with water and
chemicals under pressure in an air-tight steel tank or boiler. Sulphite
and soda pulp, which get their names from chemicals used in reducing
the wood to pulp, have longer and better fiber than ground wood pulp.
In both processes certain means are used to whiten the fiber and free
it from sap, gum, and other things which would prevent it from acting
properly in the paper-making machine, or would tend to make it grow
yellow or spotted. Spruce or basswood are the woods chiefly used, and
they seem to submit themselves to treatment better and to give a longer
fiber than other kinds. The pulp made from rags is often mixed with
sulphite and soda pulp. The rag-pulp fiber improves the quality of the
resulting paper for reasons not easily set forth. Paper made entirely
of wood may be of good quality, especially sulphite papers. The popular
outcry against wood paper is based on the fact that much of it is made
very cheaply and poorly.

The rags used in paper making are nearly all cotton. They are not
all of them rags in the ordinary sense of the term. Many of them are
cuttings from clothing factories and have never been used. New rags do
not act the same way under the treatment which changes them to paper
pulp as do the old ones. The paper made entirely from new cloth differs
somewhat from that made from old rags. The best book papers, however,
contain only stock prepared from old rags.

The process of changing rags into paper is very similar to that of
changing wood into paper. The rags are cleaned, freed from foreign
substances, cut into small pieces, thoroughly washed, bleached, and
then beaten to a pulp, under water, by machines which convert them into
a soft, homogeneous, creamy mass, called technically stuff, and yet
preserve the greatest possible length of fiber. This process of beating
rags into good paper-making material requires care and considerable
time. If the process is hastened unduly the resulting material is not
so good.

Paper is made from other materials besides wood and cotton; but nearly
all of that used in books in this country is made of one or other of
these two materials, or of a combination of the two.

The stuff produced as described, almost milk-like in its consistency,
is pumped from a tank, in which it is kept constantly stirred to
prevent the fiber from settling, onto the paper-making machine. This
machine is an evolution from a simple hand appliance which was used by
paper makers for several centuries. It was a shallow tray with a bottom
made of a network of wires. This was held in the hands, dipped into a
vat containing the paper-making material, and as much of the latter
taken up on the wires as in the judgment of the maker was sufficient
for a sheet of paper. It was then shaken gently, and deftly handled,
until the water, running through the wires, left on the latter, and
spread evenly over them, a layer of fibers. These dried and matted
together in a few seconds sufficiently to enable the maker to turn them
out on a blanket; on this another blanket was spread, and on this was
laid another layer of fibers. The skilful maker of paper by hand (in
a few places in this country the craft is still practiced) can secure
considerable evenness in the layers of fiber or pulp on the wire of his
frame; but the layer is never of quite the same thickness throughout.
Handmade paper can sometimes be distinguished by these variations in
its thickness. Machine-made paper is of nearly uniform thickness. In
the process of taking up from the vat by hand a thin layer of stuff,
the maker wove together the fibers in every direction by skilful
and delicate movements of the frame. A paper-making machine cannot
so thoroughly interweave the fibers. Paper made by hand, therefore,
has a quality which cannot be secured on a machine. This peculiar
texture of handmade paper of the first class delights the connoisseur,
and furnishes a printing surface superior, in some respects, to any
machine-made paper.

The paper-making machine consists primarily of an endless roll of
wire screen, similar to that forming the bottom of the shallow tray
used in making paper by hand. This wire screen, stretched around
rollers, travels almost horizontally away from a broad shelf from
which it receives a stream of stuff pumped onto the latter from the
tank before mentioned. As the pulp pours out onto this wire it settles
over the screen, and is woven together by the latter's oscillating
and forward movement, and by the time it reaches the end of the
screen is sufficiently matted and dry to hold its shape, the water
being removed by suction. It is then picked up by a roller, and goes
through a succession of rolls, varying in size, number, character, heat
and pressure, according to the quality of the paper being made and
the surface desired thereon. In some cases, toward the close of the
process, it is passed through a tank containing a thin mixture of glue
and water, called size, and then is again dried. Coming out as paper at
the end it is cut into lengths and piled, or gathered on a roll.

The wire diaphragm onto which the paper pulp first pours, and during
the passage over which it is worked into a mat, the water meanwhile
being extracted from it, is of varying styles. If perfectly plain the
resulting paper is almost without marks, and is said to be wove. If
made of wires of different sizes properly arranged the paper, as it
lies on it, receives deeper impressions from the larger wires than from
the smaller and the former appear as light lines running through it
when finished. Paper thus marked is called laid, to distinguish it from
the wove. As the paper comes from the wires it passes under the dandy
roll. This roll sometimes has figures or letters raised on its surface.
These impress themselves on the soft paper and produce a greater
transparency where they touch, sometimes reducing the thickness, and
give the finished paper what is called a watermark. It is so called not
because it is made of water or by water, but because it looks as though
it were drawn on the paper with a point dipped in water.

Endless varieties of paper can be made from the same materials. It may
contain more or less rag; may be beaten to a greater or less extent
and with more or less care; may be spread thicker or thinner; may be
rolled on hot rolls, or polished, more or less; may receive more or
less sizing; may be dyed in a vat before it starts for the machine, or
dipped in dye after it is made, or color may be applied to one surface
by machine. The fiber may be carelessly produced, and the chemicals
used in bleaching and cleaning it may be only partially neutralized,
with the result that the paper will soon act as if being eaten with
acid, and will rapidly turn yellow under a bright light.

The ordinary observer can distinguish between very poor and fairly good
paper in books. He cannot distinguish between paper of fairly good
quality and the best.

The paper used in newspapers is nearly all made entirely of ground
wood. Most of it is made as cheaply as possible, and soon grows brittle
and dark in color. This is of little consequence in most cases. For the
ordinary newspaper the paper has served its purpose if it looks well
for twenty-four hours after it is printed and exposed to the light.

Books are generally printed on paper which has not been very highly
polished. Ink is taken from the type more readily by paper of this
kind, especially if the latter be rather soft in texture, so that the
press drives into it the face of the type bearing the ink. Modern
processes of reproducing pictures give plates for printing, many of
which are made up of very fine lines placed very closely together and
having very shallow depressions between them. To print from these
with good results the paper used must have a very smooth, highly
polished surface. The press drives soft paper down into the narrow
places between the fine lines and blurs the impression of the cut.
Newspapers which use process-cuts of the kind mentioned are obliged
to use paper with a smooth surface to get good results. This smooth
surface is generally produced, as already noted, by passing the paper
between hot metal rollers, a process called calendering. In a more
expensive process, called plating, the paper, cut into sheets, is laid
between sheets of zinc until a pile of several inches in thickness is
formed, and this pile is passed several times under rollers exerting
a heavy pressure. This smooths, polishes and hardens the paper. Much
of the paper used for illustrations in books has a surface made by
applying a coating of clay or other material to it and then polishing
it. Quite good results can be obtained with fine line cuts on
calendered or plated paper without the addition of a coating of clay.
The illustrations on coated paper which are found in books are very
commonly printed separately from the book itself, which is on ordinary
uncoated paper, and inserted separately. Generally these inserts are
not carefully fastened in and cause much annoyance by falling out after
the book has been subjected to a little use.

Recently paper makers have succeeded in producing a paper which has a
smooth surface without the high polish usually found on that which is
coated, or highly calendered. The polished surface of these papers,
especially of the coated, is very objectionable to readers, light being
reflected from it in an unpleasant way.

It will be seen from what has been said that it is difficult so to
describe what we may call good book paper that it can be readily
distinguished. Constant study and careful comparisons of the papers one
meets in books will enable one to judge of them with some success. One
who has much to do with books should take note of the paper of which
they are made, and learn to distinguish between poor and good, and the
good and the best, as far as possible. This is especially desirable
for one whose work with books includes their rebinding and repairing.
Coated paper breaks easily, the stiffening added to it by the coat of
clay giving it a tendency to fall apart as soon as it has been folded
in the same place a few times. Soft and fragile paper, such as is found
in many books, will stand very little wear at the joint in the back.
Paper not carefully bleached and freed from the chemicals used in
bleaching, rapidly discolors at the edges where exposed to light. Such
facts as these, and many others, will be found useful when one comes to
have books rebound, or attempts to repair them.

That side of the paper which touched the wires on which it is made is
different from the other. This difference is usually visible to the
trained eye. It is often taken into consideration in fine printing.

As the pulp flows out upon the wires it tends to mat together more
thoroughly along the line of flow than across it. This gives paper a
grain, along which it tears and folds more readily than across it. This
fact also is often taken advantage of in good printing.

All paper expands or stretches when wet. This is to be kept in mind in
mending books. An added strip, pasted on, usually draws and wrinkles,
when it dries, the paper to which it is applied. Hence the rule, in
mending, to use thick paste and apply the pasted sheet or strip to its
place as quickly after pasting as possible.

Mr. Chivers has recently made, 1909, with the help of chemists
and other experts, a very careful examination of the composition,
structure, tensile and folding strength and other qualities of the
paper now used in several thousand popular books. The results of
this examination, when applied to the subjects of book-selection and
book-buying, will be of great value to libraries. The quality of the
paper used in the books on which libraries spend a large per cent.
of their book fund--novels--is the question that should be first
considered in selecting editions. Libraries may hope soon to be able to
select editions much more wisely than heretofore. The investigations
by Mr. Chivers, and those carried on by U. S. Government experts
in Washington, will not only enable libraries to discover the best
editions for purchase, but will also enable them to secure bindings so
carefully adapted to the quality of the paper in each book as to give
that book the longest possible life of usefulness.




CHAPTER XV

=Binding Records=


By binding records are meant the reports of books sent to the bindery,
their return, styles, cost, etc. There are many ways of keeping these.
For the small library great simplicity is desirable and possible. The
large library usually works out a method adapted to its own conditions.

In sending books to a binder it is usually not necessary to keep any
record other than the book card, on which may be written or stamped
the word Binder and the date sent. To this may be added a few words or
a number indicating material and style. The binder himself is usually
content with general instructions for each separate lot, such as,
"These 25 vols. bind in half brown cowskin with keratol sides; special
sewing." Some libraries attach a note to the title-page of each book
saying how it is to be bound and giving the lettering for the back.
This is not often necessary. It is usual to note the latter point on
the title page by underscoring the first letter of each word which is
to appear on the back. In doing this, reduce the lettering as far as
possible by omitting unnecessary words. In most libraries, for example,
the new title for "The Adventures of Huckleberry Finn" can be reduced
to advantage to "Huck Finn."

Special books must be specially marked of course, and books in sets
and series should be lettered in the same style throughout. This can
be assured by sending a sample volume or a rubbing of the back. The
rubbing is got by laying a piece of paper on the back of the volume the
style of which is to be copied and rubbing it hard with a large, soft
pencil or rub-off wax.

As books are returned they should be checked by whatever record was
kept of them. Then their number, sizes and styles should be entered in
a book kept for the purpose. From these items the bill will be checked
when sent in.




CHAPTER XVI

=Binding Records and Notes, Newark=


Rules followed in Newark Library in sending books to bindery.

Remove book slip, having first compared its number with the number on
the book pocket. This book slip is stamped with the word Bindery and
with the date, and then is filed with other similar slips, all being
kept in groups in accordance with the kinds of binding the books are to
receive. The slips for the books sent each month are also put together.

On the title page of the book underline with light pencil marks such
words as are to be gilded on the back. Make the title for the back as
short as it can be made without loss of identity. If the name on the
title page is a pseudonym, write the author's correct name beside it in
small letters.

Most books are sent in groups with a general note of instruction as
to the binding of the whole group. For example, a hundred books may
be sent in one lot with a note saying, "Bind in pigskin in the usual
style."

When special bindings are required, which call for special
instructions, tip slightly in the front of the book, usually on the
title page, a slip of yellow paper 3×5 inches. Bright yellow is chosen
because it is easily distinguished from the white paper of the book,
even at night, and yet writing on it is quite legible. On this slip
write the call number of the book, the special style of binding wanted
and other remarks when needed, such as the following:

Rush. If the book is to be returned in haste.

See sample. When book is one of two or more volumes and a special style
of binding is to be carried out through the whole set.

Do not trim at all. When the book is of some special character and it
is desired to preserve all the paper.

When books come back from the bindery stamp the date of their return on
the lower left corner of the back cover immediately on their receipt.
Add to this date the name of the binder if the library employs more
than one firm.

This date makes it possible to tell how bindings wear, how many years
they last, etc.

Note the style of binding of each book and look for its book slip among
the other slips for books of this style.

For some reasons it would be wise to keep the slips from all books sent
to the bindery in one alphabetical series. In the Newark Library this
proves not to be as convenient as the method described, of keeping it
first by days or months and next by styles of binding.

Examine the lettering and the numbers on the back to see if they are
correct, comparing with the title page. Examine also the binding
throughout.

If all is satisfactory, put pockets and book plates in all the books
which require them.

Mark the pockets. Open each book carefully and thoroughly that the back
may be loosened and made more flexible.

All magazines send with yellow slips containing directions as to style
of binding, etc.




CHAPTER XVII

=Bindery Equipment=


The small library will find it does not pay to have a bindery of its
own. This is a safe general rule to which there are exceptions, of
course. Special conditions, such as remoteness from good binderies,
may make it worth while for a library which spends only about $1,000
a year in binding to put in a small plant and do its own work. Even
then, however, it is usually better to find a binder who will take
the contract from the library at a fixed price per volume, using the
library's room and material. Such a binder can sometimes get additional
work from other libraries or from private individuals. It should be
noted that the amount paid for binding is not quite all that a binder
who works in the library may expect to divert to his own shop; for a
clever and obliging workman will make himself useful in repairing and
in doing many small jobs of cutting, mounting, etc., which will add a
good deal to his income. Still, as I have said, the small library will
usually find that it is not economical to have its own bindery. Were
there in this country plenty of commercial binderies, where first-rate
work is done at fair prices--I do not mean low prices--it would not
pay even the larger libraries to open their own binderies. The large
shop is the only place in which some of the most important economies
are possible, and only the large shop can afford to hire the most
competent foremen and workers. Even the large libraries find it wise to
rent their binderies to competent men who will do binding at contract
prices. Under this arrangement some libraries find it pays to give
up room to a bindery; though, as I have already remarked, they would
not find it economical to do so were there efficient library binding
establishments in the immediate vicinity.

As the large libraries have a good deal of work which the average
commercial binder does not care to take, like map mounting, rare-book
mending, and ordinary book repairs, the ideal condition for them would
be a small bindery with two or three hands, in the building; a contract
for all ordinary binding and rebinding with an outsider, and the
purchase of many new books especially bound direct from the sheets.

The following list includes the machinery, tools and materials needed
in opening a bindery. The full list would equip fairly well a shop
employing one foreman, who is also a finisher; one forwarder; one boy
(helper or apprentice), and three girls for sewing. This shop would
turn out, say, 10,000 books a year, its output depending very largely
on the character of the work.

If the shop is to bind, say, only 2,000 books per year the items marked
S on the list will prove sufficient. These estimates are very general.


=Equipment for Bindery=

    Standing press, large                            $100.00
  S Standing press, small                              30.00
  S Board shears                              $100 to 125.00
  S 2 backers, 17-inch                                 65.00
  S Cutting machine                                   325.00
  S 10-case type cabinet (6-case $8.00)                12.00
  S Finishing press, 21-inch                            2.75
  S Lettering pallet                                    6.00
  S 20 brass-bound boards, 16×24, at $3.25 per board   65.00
    Case for 14 boards                                  4.00
    16 press boards, 16×24                             16.00
    16 press boards, 10×13                              7.20
    14 press boards, 8×12                               5.60
  S 3 sewing benches, at $1.00                          3.00
  S 2 back saws, at $1.00                               2.00
  S 3 bone folders                                       .36
  S 1 glue brush, No. 4                                 1.00
  S 2 paste brushes, No. 7                              2.00
  S 2 backing hammers, at $1.25                         2.50
  S Knives and shears                                   3.00
  S Gas stove                                           1.00
    Iron bench-block, 15×12×2 inches                    7.50
  S Glue kettle                                         1.00
    Compass                                             1.00
  S Gold cushion                                        3.00
  S Gold knife                                           .75
    4 tables, benches, drawers                        100.00
  S Paring knife                                         .50
  S Band nippers                                        2.00
  S Flat polisher                                       2.00
  S Round polisher                                      3.50
  S Creaser                                             1.50
  S Agate burnishers                                    3.75
  S Band rubber                                         1.50
    Rolls and stamps                                   20.00

  S Type, ordinary, 4 fonts at $3.00; brass, 3 fonts at
    $15.00                                           $ 57.00
    Shelving and bookcases                            100.00
                                                    --------
      Total                                         $1083.41

With treble the number of books to be bound, there should be added to
the above list:

  1 large press                                      $100.00
  1 backer                                             65.00
  1 finishing press                                     2.75
  30 brass-bound boards, 16×24, at $3.25 per board     97.50
  5 sewing benches, at $1.00                            5.00
  1 back-saw, at $1.00                                  1.00
  5 bone folders                                         .60
  1 glue brush, No. 4                                   1.00
  3 paste brushes, No. 7                                3.00
  2 backing hammers, at $1.25                           2.50
  Glue kettle                                           1.00
  Compass                                               1.00
  Knives and shears                                     3.00
  Gold knife                                             .75
  Paring knife                                           .50
  Band nippers                                          2.00
  Type                                                 15.00
  Lettering pallet                                      6.00
  Iron bench block                                      7.50
                                                      ------
      Total                                          $315.10




CHAPTER XVIII

=List of Technical Terms, Leathers and Other Binding
   Materials, Tools, Styles of Ornament Used
   in Binding=


The quotations are from the report of committee on leather of the
Society of Arts, England, 1901.

=Aldine or Italian Style.= Ornaments of solid face without any shading
whatever, such as used by Aldus and other early Italian printers.
The ornaments are of Arabic character. A style appropriate for early
printed literature.

=All-along.= When a volume is sewed, and the thread passes from
kettlestitch to kettlestitch, or from end to end in each sheet, it is
said to be sewed all-along.

=American Russia.= See Cowhide.

=Antique.= See Blind-tooled.

=Arabesque Style.= A fanciful mixture of animals, birds, insects, and
of plants, fruits and foliage, involved and twisted.

=Arming press.= See Blocking press.

=Art canvas.= A book cloth, made in several colors by the Holliston
Mills, 67 Fifth Ave., New York; Jos. Bancroft & Sons, Wilmington, Del.
(A. D. Smith, 35 Thomas St., New York, agent); the Interlaken Mills,
111 Duane St., New York, and others.

It is known both as art canvas and buckram. The Newark library, in
experimenting to find a substitute for leather, tried in succession the
green, red, brown and blue. The green proved the poorest, the blue made
by Holliston Mills the best in wearing quality. One reason for the poor
results with all the colors tried, with the exception of the blue, is
that the cloth of these colors is made with a colored thread running
one way and a gray or white thread the other; the colored thread soon
wears off on the edges and corners and the gray thread gives the book
a very dingy appearance. Dark blue has given us the best results. Art
canvas costs 22 cents a square yard by the roll of 40 yards.

=Art vellum.= A book cloth made in several colors and styles of finish
by the firms which make art canvas. It is not suitable for full binding
on books subject to much wear. It costs about 16 cents per square yard.
Most publishers' bindings are in cloth of the art vellum grade.

Our own experience with art canvas and art vellum for full bindings
on books much used seems to have been that of many other libraries.
Popular books in these materials from about a dozen public libraries
all seem to have worn poorly. The joints soon become soft and loose;
the corners fray out and look ragged; the gold of the titles does not
stand out well when first put on and rapidly grows dim.

=Azure' tools.= Used in binding, where the heavy and wide marks,
instead of being a solid mass, are made with horizontal lines.

=Azured style.= Ornamentations outlined in gold and crossed with
horizontal lines in the manner of indicating azure in heraldry.

=Back, tight and loose.= Binding is said to be tight back when the
leather, cloth or other material of the back is pasted or glued to the
back of the book. This style of binding is commonly used in fine work.
Most books, often quite large ones, were formerly bound in this way.

Binding is said to be loose back when the leather, cloth or other
material of the back is fastened to the book only along the joints.
To the question, which is the better binding for library books, no
definite answer can be given.

=Backing.= Bending over the folds at the back of a book to form a ridge
or projection called a joint.

[Illustration: (L) Backing Boards, Metal
  (R) Backing Boards, Wood, Steel Faced]

=Backing boards.= Used for backing or forming the joint. They are made
of very hard wood or faced with iron, and are thicker on the edge
intended to form the groove than upon the edge that goes toward the
fore-edge of the book, so that when placed one each side of the book
and all are placed in the laying press, the whole power of the press
is directed toward the back.

[Illustration: Backing Hammer]

=Backing hammer.= The hammer used for backing and rounding. It has a
broad, flat face similar to a shoemaker's hammer.

=Backing machine.= A machine for backing books. If not carefully
handled it is apt to injure books by crushing and breaking the paper at
the folds. Used on publishers' binding.

=Backing press.= A press having two, vertically mounted, steel plates
brought together by a screw. A book is held in this press with the back
slightly projecting above the plates, and then backed with a hammer.

=Band-driver.= A tool used in forwarding to correct irregularities in
the bands of flexible backs.

=Band nippers.= Pinchers with flat jaws used for straightening bands by
nipping up the leather after it is in place. They should be nickeled to
prevent the iron staining the leather.

=Bands.= The strings, cord or twine on which a book is sewed. They are
usually made of hemp, are loosely twisted, are 2, 3, 4-ply according to
the size of the book, and cost about 35 cents per pound. This twine is
loosely twisted that it may be flexible and less likely to break when
glued and dried, and that it may be easily frayed out at the ends for
pasting down on the inside of the covers.

When the book is sewed flexible the bands appear upon the back. When
the back is so sewn as to let in the twine, the appearance of raised
bands is produced, if at all, by gluing narrow strips of leather across
the back before the volume is covered. A hard, closely twisted cord is
also sometimes used in fine binding.

[Illustration: Backing Press]

=Bastard title.= See Half-title.

=Bead.= A little roll formed by the knots of the headband.

=Beating hammer.= The heavy, short-handled hammer used in beating,
weighing generally about 10 lbs. Books are beaten to make the leaves
lie close to one another.

[Illustration: Beating Hammer]

=Beating stone.= The bed of stone or iron on which books are beaten.

=Beveled boards.= Very heavy boards for sides, chamfered along the
edges.

=Binder.= A temporary cover for periodicals and pamphlets, usually so
arranged that it may be taken off and attached to successive numbers of
a publication.

=Bindery.= A book-binding establishment.

=Blank books.= Applied to a large variety of books which are bound with
blank leaves, or leaves having ruled lines and little or no printing:
account books, memorandum books, ledgers, etc. The binding of such
books is a special trade.

=Bleed.= When a book on being trimmed is so cut that some of the print
is taken off it is said to bleed.

=Blind-tooled.= When tools are impressed upon the leather, without
gold, they are said to be blind or blank, and the book is blind-tooled.
This tooling is sometimes called antique.

=Blocking press.= Another and more general term for the stamping or
arming press; one of the chief implements used in cloth work. Used for
finishing or decorating the sides and back of a cover by a mechanical
process.

=Board papers.= Those parts of the end papers which are pasted onto the
boards.

=Board shears.= Heavy shears, usually fitted to a table, and with a
gauge for cutting boards.

[Illustration: Boards, Brass Bound, in Case]

=Boards.= Are of several kinds, such as pressing, backing, cutting,
burnishing, gilding, etc. The paste-boards used for side covers are
termed boards. The boards used for cutting books "out of boards" are
called steamboat-boards. Tinned boards are used for finished work,
while brass or iron-bound boards are used for pressing cloth-work. See
also In boards.

=Bock morocco.= The name given to a leather made of Persian sheepskin
usually finished in imitation of morocco. It does not wear well and
soon decays.

=Bodkin or stabbing-awl.= A strong point of iron or steel fixed in a
wooden handle to form the holes in boards through which to lace bands.
Used also for tracing lines for cutting fore-edges.

=Bolt.= Folded edge of sheets in an unopened book.

=Books, sizes of.= See folio, quarto, octavo, sixteenmo, thirty-twomo,
etc.

=Bosses.= Brass or other metal ornaments fastened upon the boards of
books.

=Brass-bound boards.= See Boards.

=Broken up.= When plates are folded over a short distance from the
back edge before they are placed in the book, that they may be turned
easily, they are said to be broken up. The same process is sometimes
applied to an entire book.

=Buckram.= Properly a coarse linen cloth, stiffened with glue or gum.
Most buckram, so-called, is made of cotton. See also Linen-finish
buckram and Art canvas.

=Buffing.= The name given to the thin sheet of cowhide taken off in
the operation of buffing or splitting. It is usually of very inferior
quality.

=Buffingette.= See Keratol.

=Burnished.= The effect produced by the application of a burnisher to
edges.

=Burnishers.= Pieces of agate or bloodstone affixed to handles. With
them a gloss is produced on the edges of a book.

=Calf or calfskin.= Leather made of calves' skins. It has a smooth and
uniform surface. It was formerly much used in binding, and is very
beautiful; but that made in recent years lasts only a short time, soon
growing hard and brittle and even falling into dust. Even when new the
surface is easily broken and torn.

"During the latter part of the eighteenth century it became customary
to pare down calf until it was as thin as paper. Since about 1830
little sound calf seems to have been made, as, whether thick or thin,
it appears generally to have perished, turning red and crumbling into
dust."

"Sprinkled or marbled calf is in a specially bad state."

See also Divinity, Kip, Marbled, Sprinkled and Tree calf.

=Calf-lined.= When the inside of a limp cover is lined with calfskin,
this taking the place of that half of the end paper which is usually
on the inside of the cover. This calf lining is thin and soft and is
usually glued to the leather cover only at the latter's outer edges,
thus leaving the cover pliable.

=Cancels.= Leaves containing errors which are to be cut out and
replaced with corrected pages.

=Canvas.= See Duck.

=Caps.= Paper coverings used to protect the edges while the book is
being covered and finished. Also the leather coverings of headbands.
See Head cap.

=Case bindings.= The ordinary cloth binding of commerce. Books in
these bindings are folded and sewn, rounded and backed by machinery.
A machine also makes the cases, covering the two pieces of cardboard
which form the sides with cloth as needed. These cases are separately
printed before being put on the books. The book is then glued and put
into its case by machinery.

=Catchword.= A word placed under the last line on each page of some
old-time books, the word being the same as the first word on the next
page; a direction word.

=Center tools.= Tools cut for ornamentation of center of panels and
sides of book covers.

=Circuit edges.= Bibles and prayer-books are sometimes bound with
projecting covers turned over to protect the leaves; these are called
circuit or divinity edges.

=Clasp.= A hook or catch for fastening the covers of a book together,
usually at the fore edge.

=Clearing out.= Removing the waste paper and paring away superfluous
leather upon the inside, preparatory to pasting down the lining-paper.

=Cloth boards.= Stiff boards covered with cloth.

=Cobden-Sanderson style.= An arrangement of graceful curves or stems,
flowers, buds and leaves, treated conventionally; the background being
often powdered with nebulae of gold stars or dots. The lettering of
title, etc., on back and sides is treated fancifully and often made an
integral part of the design.

=Collating.= Examining the signatures, or sheets, after a volume is
gathered, to ascertain if they be correct and follow in numerical
order. Also, examining a book page by page to see if it is complete.

=Combs.= Instruments with wire teeth used in marbling. The colors being
upon the surface of water, the comb is drawn across a portion in such a
way that a new form is developed.

=Corners.= Leather pieces pasted on the corners of a half-bound or
three-quarter-bound book.

=Cowhide.= The thick, coarse leather made from the skin of a cow.
By binders it is commonly known as "American Russia," or "imitation
Russia." It is much used for binding popular books of fiction. It has a
slight grain or corrugation on the surface, is tough and strong, takes
gilding well, wears well and if of best quality and handled much is
usually quite durable; that is, will last five or six years on popular
fiction.

=Creaser.= The tool used in marking each side of the bands, generally
made of steel.

=Cropped.= When a book has been cut down too much it is said to be
cropped.

=Crushed.= Leather which has been pressed between sheets of metal to
smooth or give a finish to its coarse grain is said to be crushed. The
process is usually applied to morocco or its imitations. See Crushed
levant.

=Crushed levant.= Levant morocco with the grain crushed down until the
surface is smooth and highly polished. In fine binding this is done by
hand after the leather is on the book. Most crushed levant morocco,
however, is surfaced by a machine before it is applied to the book.

=Cut edges.= See Edges cut.

=Cut flush.= Means that the cloth cover, which is usually limp (without
boards), is drawn on the book and the whole cut at once, cover and all,
the edge of the cover being cut flush with the edge of the book. It
is a suitable way of binding only when strength and elegance are not
required.

=Cutter, or Cutting machine.= The machine on which the edges of the
leaves of books are cut or trimmed. Running such a machine is now a
special branch of the binder's trade. Sometimes called a guillotine.

=Cutting boards.= Wedged-shaped boards somewhat like backing-boards,
but with the top edge square; used in cutting the edge of a book and in
edge-gilding.

=Cutting in boards.= Cutting the edges of a book with a plough after
the boards are laced on.

=Cutting press.= When a lying press is turned so that the side with the
runners is uppermost it is called a cutting press.

=Dandy.= A roller affixed to paper-making machines. The wet web of
paper carried on the endless wire of the machine passes under this
roller and is pressed by it. It gives the laid or wove appearance to
the sheet, and when letters, figures, or other devices are worked in
fine wire on its surface it produces the effect known as water-marking.

=Deckle-edge.= The rough untrimmed edge of hand-made paper.
Deckle-edges are poorly imitated by cutting and tearing machine-made
paper, sometimes with the aid of a jet of water.

[Illustration: Oswego Hand Wheel Drive Cutter]

=Dentelle border.= A tooled pointed border with finely dotted or Gascon
ornaments in imitation of lace.

=Derome style.= This style has ornaments of a leafy character, with a
more solid face, though lightly shaded by the graver. The ornaments
are often styled Renaissance, being an entire change from the Gascon.
The Derome is best exemplified in borders, Vandyke in design; it is
simple in construction but rich in effect, and is appropriate for art
publications. Time, eighteenth century.

=Diaper.= A term applied to a small repeating all-over pattern. From
woven material decorated in this way.

=Divinity calf.= A dark brown calf bookbinding decorated with blind
stamping, and without gilding; so called because formerly used in
binding theological books.

=Divinity edges.= See Circuit edges.

=Double.= See Doublure.

=Doublure.= The inside face of the boards, especially applied to them
when lined with leather and decorated. When thus lined a cover is said
to be "double."

=Duck, sometimes called Canvas.= This is made by many firms in a wide
range of colors and qualities. It is in fact a heavy cotton cloth.
Slate-colored duck 28 in. wide, 10 oz. to the yard, costs about 20
cents per yard. This is a firmly woven, smooth material. We have used a
light green. It takes printers' ink for lettering fairly well, though
it soon soils if handled. It is a very desirable binding for heavy
books not much used. All such books should be stiffened by pasting or
gluing cloth on the backs, if loose back, and should be reinforced at
head and tail.

=Dutch metal.= An imitation of gold leaf, sometimes used on cheap
bindings. It soon grows dark or tarnishes.

=Edges cut.= A book or pamphlet cut down sufficiently to make all the
edges quite smooth.

=Edges gilt.= Book edges cut and gilded.

=Edges opened.= A book or pamphlet opened, the folds of the leaves
being cut by hand with a paper knife.

=Edges red.= Book edges cut and colored red.

=Edges rolled.= When the edges of the covers are marked with a roll,
either in gold or blind.

=Edges rounded.= Corners rounded to prevent their becoming dog's-eared.

=Edges trimmed.= A book or pamphlet with the edges cut enough to make
them tidy, but not enough to cut the folds of the leaves.

=Edges untouched.= A book or pamphlet with edges uncut and unopened.

=Edition de luxe.= Applied to large paper editions of books, and to
special editions which are in fact, or are claimed to be, unusually
well and expensively made.

=Embossed.= When a plate is so stamped upon a sheet or cover as to
produce a raised figure or design.

=End leaves or Lining papers.= Are the sheets which are pasted to the
inside of the covers, and are either plain white or colored, according
to the style of binding. Marbled papers are largely used on fine
leather work. Sometimes in fine bindings the end leaves are made of
silk or leather.

=End papers.= The papers placed at each end of the volume and pasted
down upon the boards. Also, the paper placed at each end of the volume,
a portion of which is usually removed when the lining-paper is pasted
down upon the boards.

=English linen or Low buckram.= A linen cloth, highly polished, well
colored, strong, durable, made in England, and costing in this country
about 70 cents per square yard. In De Jonge's list (De Jonge, dealer
in leather, book cloths, etc., 69-73 Duane St., New York) it is called
Low buckram. We have used it for the backs of books, light and heavy.
It promises to stand indefinitely if not much handled. Under handling
it grows soft and flabby like other book cloths, though not rapidly,
and without losing its strength. We have discarded it for the books on
which we first tried it, periodicals subject to much use. It is not
easy to letter in gold by hand, and does not hold gold well under wear.

=Eve style.= A framework of various geometrical-shaped compartments
linked together by interlaced circles; the centers of the compartments
are filled with small floral ornaments and the irregular spaces
surrounding them with circular scrolls and branches of laurel and palm.
An elaborate style of the end of the sixteenth and beginning of the
seventeenth century.

=Extra binding.= A trade term for the best work.

=Fanfare style.= When the compartments on a decorated corner formed by
fillets or curves, or both, are filled with little branches, vines,
etc., the style of decoration is said to be fanfare--from its first
having been used on a book of which this word formed the principal part
of the title.

=Fillet.= A cylindrical tool upon which a line, lines, or figures are
engraved. Used in finishing.

=Finishing.= The department which receives books after they are put
in leather, and ornaments them as required. It includes lettering,
tooling, polishing, etc. Also, the ornaments placed on a book. One who
works at this branch is termed a finisher.

[Illustration: Finishing Presses]

=Finishing press.= A small press with which a book is held firmly with
its back upward and exposed for work.

=Finishing stove.= A small gas heater, similar to a "hot plate," for
heating finishing tools.

=Flexible binding.= When a book is sewn on raised bands or cords and
the thread is passed entirely round each band, and the whole binding
is such as to permit the book to be opened readily.

[Illustration: Finishing Stand]

=Flexible glue.= This is usually made by adding about two
tablespoonfuls of glycerine to half a pound of the glue in a dry state.

This glue used on the backs of books makes the binding somewhat more
flexible. It cannot be recommended for all books in all cases as the
glycerine tends to weaken the glue, at the same time that it prevents
it from becoming very hard.

=Flexible sewing.= When the cord rests on instead of being sunk into
the back and the thread is carried around it; a book thus sewn usually
opens freely.

=Flush cut.= See Cut flush.

=Fly leaves.= The blank leaves at the beginning and end of a book,
between the end papers and the book proper.

=Folder.= A flat piece of bone or ivory used in folding the sheets and
in many other manipulations. Also applied to the person engaged in
folding sheets.

=Folio.= A sheet folded once, consisting of two leaves, or four pages;
the size of the sheet being usually understood as about 19×24 inches,
giving a leaf 19×12 inches. Also, the consecutive page numbers of a
book, pamphlet, etc.

=Fore-edge.= The front edge of the leaves.

=Forwarding.= All processes through which a book passes after sewing,
other than those of ornamentation by means of tools or rolls. Also that
department which takes books after they are sewed and advances them
until they are put in leather ready for the finisher. One who works at
this branch is termed a forwarder.

=French guard.= Made by turning over half an inch or more of the back
edge of a printed sheet or illustration and then folding it around the
next signature.

=French joint.= A joint in which the board is not brought close up to
the back, thus giving more play in opening.

=French morocco.= An inferior quality of levant morocco, having
usually a smaller and less prominent grain.

=Full-bound.= When the sides and back of a book are entirely covered
with one piece of the same material it is said to be full-bound.

=Gascon, Le, style.= The distinguishing feature of this style is the
dotted face of the ornaments instead of the continuous or solid line.
Wherever these dotted ornaments are used the style is called Le Gascon.
Time, the first half of the seventeenth century, immediately following
that of Nicholas and Clovis Eve.

=Gathering.= The process of collecting the several sheets which make a
book and arranging them according to the signatures.

=Gaufre edges.= Impressions made with the finisher's tools on the edges
of the book after gilding.

=Gauge.= The tool used in forwarding to take the correct size of the
volume and to mark it upon the boards for squaring.

=Gilding press.= A press made of two square blocks brought together by
screws, to hold books for gilding.

=Gilt.= Applied to ornamental work on covers and also to edges of a
book; in the latter case, chiefly used for the top.

=Gilt edges.= See Edges gilt.

=Gilt tops.= Books with the top edges cut and gilded. This prevents
their being soiled by the dust that may collect on them.

=Glair.= The white of eggs beaten up and used in finishing and gilding
the edges of the leaves.

=Goffered edges.= See Gaufre edges.

=Gold cushion.= A cushion of leather on which the finisher cuts gold
leaf into pieces.

=Gold knife.= The knife for cutting the gold leaf; long and quite
straight.

=Gold leaf.= Gold beaten into very thin leaves, occasionally used for
printing purposes, but more particularly for the decoration of book
covers.

=Gouge.= A gilding tool cut to impress a curved line or segment of a
circle upon the leather.

=Grain.= The term applied to the outer side of a piece of leather, from
which the hair was removed. This word is also used in describing the
different kinds of surface given to leather in the making, often with
a qualifying adjective, as, seal-grain, like the grain on sealskin;
coarse grain; pebble-grained, that is, grained in an irregular manner,
as though numerous small pebbles of different sizes had been pressed
upon its surface; water grain; smooth grain; brass board grain, usually
put into cowskin, etc.

=Graining.= The process of giving to leather surfaces of different
kinds.

=Grater.= An iron instrument used by the forwarder for rubbing backs
after they are paste-washed.

=Grolier style.= An interlaced framework of geometrical
figures--circles, squares, and diamonds--with scrollwork running
through it, the ornaments of which are of moresque character, generally
azured in whole or in part, sometimes in outline only. Parts of the
design are often studded with gold dots. Time, first half of the
sixteenth century.

=Groove.= That part of the sections which is turned over in backing to
receive the board. Also called the Joint.

=Guards.= Strips of paper inserted in the backs of books to which
plates or pictures or any extra leaves are to be attached. These strips
must always be cut with the grain. They make the back as thick as the
book will be when the plates have been attached to them. Also, the
strips of paper or cloth pasted along the folds of leaves to strengthen
them. Also, the strips pasted to the edges of single leaves, whether
plates or not, folded about the next signature and sewn through with it.

Books with thick, heavy leaves are sometimes guarded or hinged
throughout that they may open freely. A narrow strip is cut from the
back of each leaf. This strip is then again attached to the leaf from
which it was cut by a strip of thin paper or muslin which acts as a
hinge. The leaves are then bound together through and by the strips cut
from them.

=Guides.= The grooves in which the plough moves upon the face of an
old-style cutting-press.

=Guillotine.= A machine with a heavy knife having a perpendicular
action, used for cutting paper. Usually called a Cutter, or Cutting
machine.

=Half-bound.= When the back of a book is covered with leather and the
sides with paper or cloth. Some binders call a book half-bound when it
has leather on the back and small pieces on the corners. Three-quarters
bound means wide leather back and large leather corners.

=Half-title.= The brief title which precedes the main title page,
usually a single line in plain type; the bastard title.

=Hand letters.= Letters fixed in handles; used singly for lettering.

=Head and tail.= The top and bottom of the back of a book.

=Headband.= The silk or cotton ornament worked at the head and tail of
a book to give it a finished look, to strengthen it and to make the
back even with the squares or boards which form the sides. On cheap
binding the headband is cut from a strip of machine-made material and
pasted in merely for ornament.

=Heel-ball.= A preparation of wax used by shoemakers, in the form of a
ball, in burnishing the heels of shoes.

=Head cap.= The fold of leather over the headband.

=Imitation Russia.= See Cowhide.

=Imperial morocco cloth.= A grain-finished linen-thread cloth
manufactured by the Winterbottom Book Cloth Company of England. It is
made in different colors; of these the library has tried but one, the
green. On books which have some, but not constant use, it is a very
good substitute for leather. It takes lettering well, and wears better
than any of the cloths the library has tried. The price is 48 cents per
square yard by the roll, fast color, duty paid. (De Jonge & Co., 69-73
Duane St., New York.)

=In boards.= When a book is cut after the boards are affixed to form
the sides, it is said to be cut in boards. The term is also applied to
a style of binding in which the boards are covered with paper only.

=Inset.= When one sheet is placed inside of another, both being folded.

=Inside margins.= The border made by the turn in of the leather on the
inside of boards.

=Inside tins.= Sheets of tin; so called from being placed inside the
boards when a book is put in the standing-press.

=Jansen style.= Without line or ornament either in blank or gold. It
permits decoration on the inside cover, but demands absolute plainness
on the outside, with the exception of lettering. It is only appropriate
for crushed levant, it being dependent for its beauty on the polished
surface of the leather.

=Javelle water.= To one pound of chloride of lime add four and a half
pints of water, and put in a jar with tight cover. Dissolve 20 oz. of
ordinary washing soda in four and a half pints of boiling water, in a
separate vessel, and immediately pour into the first mixture. When cold
add enough water to make eleven pints in all. Strain through muslin,
settle, and pour off the clear solution. This will remove many stains;
but care must be taken to rinse thoroughly the paper with water after
using it, as it tends to rot paper.

=Joints.= The projections formed in backing to admit the boards. Also
the leather or cloth, with its lining, where it passes from the book
proper to the boards when the volume is covered; that is, the part
of the binding that bends when the boards are opened. See also French
joint.

=Justification.= The process of making the pages of a book lie opposite
one another to insure a straight and equal margin throughout.

=Keratol,= the B B B grade, or Buffingette manufactured by the Keratol
Company, cor. Clifford and Van Buren Sts., Newark, N. J., at 35 cents
per yard. A waterproof cloth made in imitation of leather. It is
excellent for the sides of books which receive much wear, as it does
not show either finger or water marks, and outlasts the ordinary book
cloth. It cannot be recommended for full binding as it is difficult
to letter and wears away quickly at the joints. At first it has a
disagreeable odor, but this wears off. An objectionable feature is that
labels cannot easily be pasted upon it. To overcome this difficulty,
put a thin coat of shellac on the place where the label is to go. The
objectionable point mentioned is overbalanced by the material's good
qualities.

=Kettlestitch.= As the sewer draws the thread out through the hole
near the end of a signature she passes it between the two preceding
signatures and around the thread which connects them, before she passes
it into the hole in the signature she next lays on. This is called the
kettle-stitch, a word said to be a corruption of either catch-up stitch
or chain stitch.

=Keys.= Little metal instruments used to secure the bands to the sewing
bench.

=Kip calf.= Made from the skin of a heifer; much stronger than ordinary
calf.

=Knocking-down iron.= A heavy iron plate on which are placed the sides
of a laced-in book when the lacings of string, tape or vellum, are
pounded down with a hammer so they will not show when the book is
covered.

=Laced in.= When the boards are affixed to the volume by passing the
bands, strings, or tapes on which it is sewn through holes made in the
boards, they are said to be laced in.

=Laid paper.= Having lines water-marked in it, running through it at
equal distances apart, the lines being thin places made by the pressure
of projections on the dandy-roll.

=Laying press.= See Lying press.

=Law sheep.= Law books are usually bound in sheep left wholly
uncolored, hence the term. Many law books are now bound in buckram,
canvas or duck.

=Leatherette.= Cloth or paper made to look like leather. There are many
kinds used in binding, some of which look very well and wear about as
long as poorer kinds of cloth.

=Lettering block.= A piece of wood of about the size and shape of a
large book. Leather labels which are to be lettered in gold are laid on
the rounded edge of this block that the pallet may be pressed on them
more readily.

=Lettering box.= The iron box in which type are screwed up preparatory
to lettering. To the box is attached a handle, the whole forming a
pallet.

=Lettering pallet.= See Pallet.

=Levant morocco.= Originally made in the Levant from the skins of
Angora goats. A superior quality of morocco, having a large and
prominent grain. French levant morocco has long held its place as the
best of all leathers for bookbinding.

=Limp binding.= Binding with a thin and yielding cover. A perfectly
limp leather book can be rolled up easily.

=Linen.= See English linen.

=Linen-finish buckram.= Polished buckram and satin-finish book cloth.
Manufactured by Jos. Bancroft & Sons Co., Rockford, near Wilmington,
Del. (New York agent, Albert D. Smith, 35-37 Thomas St., New York.)
The special features of these cloths, in which it is claimed they
are superior, are uniformity of color, finish and fabric, wearing
qualities, tensile strength, and easy application of decoration, ink or
metal.

=Lining papers.= The colored or marbled paper at each end of a book.
Called also End papers, which see.

=Loose back.= See Back, tight and loose.

=Low buckram.= See English linen.

=Lying press.= The term applied to the under side of the cutting press
when used for backing. Usually called laying press.

=Maioli style.= A style prior to and contemporary with the early
(Italian) examples of the Grolier. Generally composed of a framework of
shields or medallions, with a design of scrollwork flowing through it.
Portions of the design are usually studded with gold dots. Ornaments
are of moresque character.

=Marbled calf.= Calf so treated with acid that it bears some
resemblance to marble.

=Marbler.= A workman who marbles the edges of the leaves.

=Marbling.= A process of decorating sheets of paper and edges of books
with variegated colors in irregular patterns.

=Millboard.= The boards that are attached to the book to form the
covers. Several kinds are in use now; the best is made of old naval
cordage.

=Millboard machine.= See Board cutter.

=Mitred.= When the lines in finishing intersect each other at right
angles and are continued without overrunning each other, they are said
to be mitred.

=Morocco.= Leather made from goatskins, tanned with sumac, originally
made in the Barbary states, but afterwards very largely in the Levant,
and now produced in Europe and America from skins imported from Asia
and Africa. The peculiar qualities of true morocco are great firmness
of texture, with flexibility, and a grained surface, of which there are
many varieties. This surface is produced by a process which consists
largely in rolling and folding, called graining. True morocco is of
extreme hardness, and makes the most durable book bindings; it is used
also for upholstering seats and for similar purposes, and to a certain
extent in shoemaking.

"Early specimens of red morocco, from the sixteenth to the end of the
eighteenth century, were found in good condition, and of all leathers
noticed this seems to be the least affected. In the opinion of the
committee, most of this leather has been tanned with sumac or some
closely allied tanning material. Morocco bindings earlier than 1860
were generally found to be in fairly good condition; but morocco after
that date seems to be much less reliable, and in many cases has become
utterly rotten."--Report '01.

Leather called morocco, sometimes with a qualifying adjective, is now
made in Europe and America. Much of this is very good, even when made,
as it often is, from other skins than those of goats. Even the experts
seem often unable to distinguish the good from the best. None of it is
to be condemned or approved because it is or is not made in the Levant,
or from goatskins.

=Morocco.= The name given to any imitation, often made of sheepskin, of
the genuine morocco.

=Morocco.= For Bock, French, Levant, Persian, Turkey morocco, see the
several words.

=Morocco cloth.= See Imperial morocco cloth.

=Mosaic binding.= A binding of leather decorated with designs made in
whole or in part by inlaying pieces of leather or other material of
different colors. The designs are usually outlined with gold.

=Mottled calf.= A light brown calf bookbinding, made to look mottled by
treatment with acid.

=Niger goatskin.= Brought from Africa by the Royal Niger Company.
A native production. It has a very beautiful color and texture,
with no grain. It has stood all the tests given it without serious
deterioration. It does not keep clean under handling as well as a
good coarse-grained morocco. Especially recommended by the committee
appointed to investigate leather by the Society of Arts, of England.

=Octavo.= A sheet of paper folded into eight leaves, being, when
folded, about 8-1/2 × 5-1/2 inches; usually written 8vo.

=Off-set.= The impression made by print against the opposite page, when
a book has been rolled or beaten before the ink is dried; also called
Set-off.

=Opened edges.= See Edges opened.

=Out of boards.= When a volume is cut before the boards are affixed it
is done "out of boards." Nearly all work is now done out of boards.

=Overcasting.= Sewing the leaves or signatures of a book together over
and over. Usually done only when the book consists of single leaves
or plates; but is quite commonly employed now in rebinding books,
especially on the last two or three signatures front and back. Also
called whip-stitching. Probably 90 per cent. of the books published
today will stand wear better if they are properly overcast than if they
are sewed in the ordinary way.

=Pallet.= Name given to the tool used in gilding upon the bands;
sometimes applied to the steel box, with a handle, in which letters are
fastened when they are pressed upon the back.

=Panel.= The space between bands; also applied to beveled and sunk
sides.

=Paneling.= The sides of books are sometimes ornamented with sunken
panels. Paneled covers are usually made of wood and covered with
leather, though sometimes a paneled effect is produced on cardboards by
heavy pressure.

[Illustration: Lettering Pallet]

=Papering up.= Covering the leaves of a volume to protect them while
the volume is being finished. This is often done in fine binding,
especially after edges have been gilded.

=Paring.= Reducing the edges of the leather by cutting them down to
form a gradual slope. In large binderies now done by a machine.

=Paring knife.= The knife used for paring.

=Pastewash.= A thin dilution of paste in water.

=Payne, Roger, style.= The ornaments of this style are easily
identified, being free and flowing in stem and flower; whereas
before Payne's time they had been stiff and formal. The honeysuckle
is a customary ornament. The impressions of the tools are usually
studded round with gold dots, whether used in borders, corners, or
centerpieces. The style is well suited for early nineteenth century
literature, especially poetry.

=Pebble grained.= See Grain.

=Persian morocco.= A kind of morocco leather much used in bookbinding.
It may be finished by graining in several styles. It is mostly made in
Germany, from the skins of hairy sheep called Persian goats, whence its
name is derived.

"East Indian or 'Persian' tanned sheep and goatskins, called 'Persian
morocco' or 'Persian sheep,' now used largely for cheap bookbinding
purposes, are extremely bad. Books bound in these materials have been
found to show decay in less than 12 months and probably no book bound
in these leathers, exposed on a shelf to sunlight or gas fumes, can be
expected to last more than five or six years."--Report '01.

=Petits Fers.= Small hand tools used in finishing, as distinguished
from the stamps or blocks worked in a press.

=Pieced.= When the space between bands, where lettering or title is
placed, has fastened to it a piece of leather different from the back,
it is said to be pieced or titled.

=Pigskin.= Leather made of pigskin. It is very tough and if constantly
handled wears well.

"Modern pigskin, if genuine, seems to last very well in some colors
and in an undyed condition; but some colored pigskin bindings have
utterly perished. Pigskin is naturally hard and rather stiff leather
and is suitable for large books rather than small, and for books which
are much handled." "If submitted to severe softening processes in
manufacture its durability is very small."--Report '01.

Chivers has used a soft, thin pigskin with great success, here and in
England.

=Plate.= An illustration printed from a plate. Term often incorrectly
applied to illustrations printed from wood-cuts. Also, any full page
illustration printed on paper different from that of the rest of the
book is usually called a "plate."

=Plough.= An instrument used in cutting the edges of books and boards.

=Pointille style.= The dotted style of ornament of Le Gascon.

=Points.= Small holes made in the sheets by the printer which serve as
guides in registering and folding.

[Illustration: Flat Polisher]

=Polisher.= A steel instrument for giving a gloss to leather after
finishing.

=Powder.= See Seme.

=Press.= There are several kinds of presses, viz.: plough and press,
for cutting, and standing, stamping, embossing, gilding, and finishing
presses.

=Press pin.= An iron bar used for turning the screws of presses.

=Pressing boards.= Boards put between books when they are pressed. They
are usually made of carefully seasoned wood, and have a heavy strip
of brass about their edges, which projects a little above the board's
surface. Books are laid on the boards with their backs projecting over
this band enough to bring the latter exactly into the groove of the
joint. Another board is laid on these books in the same position as the
first, and so on. All are then pressed.

=Pressing plates.= Thin plates of metal, japanned or nickeled, used to
give a finish or polish to the leather on a book by placing them next
to the leather and then subjecting book and plates to heavy pressure.

=Publishers' bindings.= See Case bindings.

=Quarto.= When a sheet is folded into four leaves, the size of the
folded piece being about 11 × 8-1/2 inches; usually written, 4to.

=Quire.= Twenty-four sheets. When the sheets of a pamphlet are folded
and set into each other in one section, they are quired.

=Recto.= The right page; verso is the left page.

=Red edges.= See Edges red.

=Register.= When the print on one side of a leaf falls exactly over
that on the other it is said to register. Also, a ribbon placed in a
book as a marker.

=Renaissance ornaments.= See Derome style.

=Roan.= Leather made of sheepskin and not split. See Sheepskin.

=Rolled edges.= See Edges rolled.

=Rolling machine.= A machine introduced to save the labor of beating.
By it the sheets are passed between two revolving cylinders. Used in
publishers' binding.

=Rolls.= Wheels of brass, cut to any pattern, for impressing gold leaf
on leather.

=Roulette border.= A border design produced by a wheel on the
circumference of which is engraved a pattern that reproduces itself as
the wheel is revolved.

[Illustration: Rounding Hammer]

=Rounded edges.= See Edges rounded.

=Rounding.= The process by which the back of a book is made round.

=Rounding hammer.= A heavy, round-faced hammer used in rounding books.

=Roundlet.= A small circle in gold.

=Roxburgh binding.= A binding with a rather narrow leather back,
without bands, simply lettered, paper sides and no leather corners.

=Rubbing or rub-off.= The name usually given to the copy of the
lettering on the back of the book, made by holding thin paper tightly
over the back and rubbing the paper with a heel-ball or a piece of
plumbago.

=Run up.= When a back has a fillet run from top to bottom without being
mitred at each band, it is said to be run up.

=Russia leather.= A fine leather prepared in Russia, and imitated
elsewhere, by very careful willowbark tanning, dyeing with sandalwood,
and soaking in birch oil. It is of a brownish red color, and has a
peculiar and characteristic odor. The genuine is not often used in
binding; it is not as strong as cowhide.

"In nearly all samples of Russia leather a very violent form of red
decay was noticed. In many cases the leather was found to be absolutely
rotten in all parts exposed to light and air, so that on the very
slightest rubbing with a blunt instrument the leather fell into fine
dust."--Report '01.

=Saddle-stitched.= A pamphlet or book of one signature only sewed with
thread or fastened with wire staples along the back is said to be
saddle-stitched.

=Sawing in.= Making grooves in the back of a book with a saw to receive
strings or bands.

=Seal grain.= See Grain.

=Section.= A folded sheet. See Signature.

=Seme, or Semis, or Powder.= Ornamentation in which a device is
repeated at regular intervals.

=Set-off.= See Off-set.

=Setting the head.= Covering the headband neatly with the leather to
form over it a kind of cap.

=Sewer.= The person who sews together on a sewing bench the sheets,
called when folded sections or signatures, to form a book.

[Illustration: Sewing Bench]

=Sewing bench.= A board from one side of which rise two sticks across
which is a bar, which can be moved up and down and fixed in any desired
position. Strings, bands, or tapes are stretched vertically between the
edge of the board and the cross bar; against these the signatures of a
book are successively placed and to them sewed.

=Sheepskin.= The commonest leather used for binding. When unsplit it is
called Roan. When split in two, the upper half is called Skiver, the
under or fleshy half a Flesher. This leather is easy to work, takes
gold lettering easily, and looks fairly well on a book. But it is not
strong, and most kinds dry out and break within three to five years,
even if much handled. The leather made from the skin of the sheep is
not all alike. The remark already made, that a given piece of leather
is not to be condemned for its name, applies to all the other leathers
in this list. The skin from some mountain-bred sheep, for example, if
well tanned, makes a good leather.

"Sheepskin bindings of the early part of the century are many of them
still in good condition. Sheepskin, in a fairly natural state, seems
to keep its flexibility, but it is very easily damaged by friction.
Since about 1860 sheepskin as sheepskin is hardly to be found. We have
instead sheepskins grained in imitation of various other leathers, and
these imitation grained leathers are, generally speaking, in a worse
condition than any others, excepting, perhaps, some of the very thin
calf bindings."--Report '01.

=Shelf-back.= The back of the book, showing the title, bands,
decorations, etc.

=Signature.= The letter or figure under the foot-line of the first page
of each sheet or signature to indicate the order of its arrangement in
the book; often applied to the sheet itself.

=Sixteenmo.= A sheet folded into sixteen leaves, about 4×6 inches when
folded. Usually written 16mo.

=Size.= A preparation of pastewash used in finishing and gilding.

=Sizes of books.= See folio, quarto, octavo, etc.

=Skiver.= The outer hair or grain side of sheepskin which has been
split. It is commonly the thinner of the two parts, as when the inner
is prepared for chamois. It usually looks well, and is easily worked,
but is not strong. Much used for bindings. See Sheepskin.

=Slips.= The ends of the band, twine or tape on which the book is sewn
that project beyond the back after it is sewed.

=Smooth calf.= Plain or undecorated calf.

=Split leather.= Leather split by machine. Two or more pieces or
splits are thus obtained either of which may be used. The inner layer
is usually of inferior quality. Sometimes leather is split simply to
secure uniformity of thickness in the outer parts.

=Sprinkled calf.= Calf so treated with acid that it looks as if it had
been sprinkled with a dye.

=Sprinkled edges.= Cut edges of books sprinkled with color, that the
marks made by handling may be less evident.

=Squares.= The portion of the boards that project beyond the edge of
the leaves of the book.

=Stabbed.= A pamphlet or book of one or more signatures held together
by thread or wire staples driven vertically through near the back edge
is said to be stabbed.

=Stabbing.= The operation of piercing the boards with a bodkin for the
slips to pass through. Also the piercing of pamphlets for stitching.
Also the process of fastening pamphlets together with staples of fine
wire, done on a machine.

=Stamping press.= See Blocking press.

=Stamps.= The brass tools used in finishing to impress figures upon
the leather; they are distinguished as hand stamps and stamps for the
press.

[Illustration: Standing Press of Wood and Iron]

=Standing press.= A large press with screw for pressing many books at
once.

=Start.= When, after cutting, one or more sections of the book come
forward, making the fore edge irregular, they are said to have started.

=Steamboating.= Cutting books out of boards, a number being cut at the
same time.

=Straight edge.= A flat ruler.

=Super.= A thin, loosely woven cotton cloth, glued onto the backs
of books to help to hold the signatures together and, by extending
over to the inside of the cover, to hold book and cover together.
In publishers' binding this is usually all that holds a book in its
case. It is thin and loosely woven that it may be easily glued down
and starched that it may be easily handled. Its place is taken in good
binding by fine muslin or jaconet.

=T. E. G.= Top-edge gilt.

=Tacky.= Sticky; spoken often of glue after it has set, but before it
is quite dry.

=Tail.= See Head and tail.

=Tape.= Cotton tape on which many books are best sewn. It should be
stout but flexible.

=Thread.= The thread with which books are sewn is usually made of
linen, unbleached. It comes in several sizes. If of good quality, say
Hayes's Standard linen, it costs about $1.25 per pound for No. 18
2-cord.

Silk thread is sometimes used in extra binding and on very thick books.

In machine sewing cotton thread is used and wears well.

=Thirty-twomo.= A sheet of paper folded into thirty-two leaves; usually
written 32mo.

=Three-quarters bound.= See Half-bound.

=Tight back.= See Back, tight and loose.

=Title.= The space between the bands upon which the title is lettered.

=Titled.= See Pieced.

=Tools.= Brass stamps used for impressing gold leaf on leather. Applied
particularly to the hand stamps and tools used in finishing.

=Top cover.= The upper or front cover of a book in binding.

=Top edges.= The head or top of a book, in contradistinction to
fore-edge or tail.

=Top gilt.= Used in speaking of a book of which the top edge only is
gilded.

=Top side.= The front side of the cover of a book in binding.

=Tree calf.= A bright brown calf stained by acids in conventional
imitation of the trunk and branches of a tree.

=Trimmed.= The edges of a book are said to be trimmed when the edges of
the larger or projecting leaves only have been cut.

=Trindle.= A strip of thin wood or iron used to take the round out of a
book when it is cut.

=Tub.= The stand which supports the lying press. Originally an actual
tub to catch the shavings.

=Turkey morocco.= Made of goatskins from Turkey. It is very strong,
durable leather; expensive, but worth the money.

=Turning up.= The process of taking the round out of a book when the
edge is cut. All books that are cut in boards have a pair of trindles
thrust between the boards and across the back to assist in this
operation.

=Tying up.= Tying a volume with heavy twine after the leather cover has
been drawn on to make the leather adhere to the sides of the bands;
also to help in setting the head.

=Uncut.= A book is said to be uncut when the edges of the paper have
not been cut with the cutting machine.

=Unopened.= A book is said to be unopened if the bolts of the sheets
have not been cut.

=Vellum.= See Art vellum.

=Verso.= The left page.

=Waste, or Waste leaves.= Part of the end papers and the blank leaves
between the colored end papers and the book proper; should be part of
the same lot of paper with which the book is printed. One of the waste
leaves is often pasted to the loose half of the lining paper or end
sheet, thus forming a doubled fly-leaf.

=Waste papers.= See End papers.

=Waterproof sheets.= Sheets of celluloid or waterproof cardboard
sometimes laid in or between books when pressing.

=Whatman paper.= A high grade quality of English hand-made paper, both
laid and wove, chiefly used for drawing.

=Whipping.= Same as whipstitching or overcasting.

=Whipstitching.= See Overcasting.

=White edges.= Simply cut, without being gilded or colored.

=Whole binding.= When the leather covers the back and sides of a
volume.

=Wire staples.= Fine wire staples used by certain book-sewing machines
in the place of thread for holding the sections to a piece of muslin.
Also the staples used in place of thread in saddle-stitching a pamphlet
of one signature on a machine. Used also in holding a book of several
signatures together, the staple being driven through all the signatures
close to their back edges.

=Witness.= When a book has been trimmed, leaving some of the leaves
still rough, the latter are a witness as to the original size of the
sheet and prove that it has not been cut down.

=Wove paper.= That which does not show water-marked lines running
across it; distinguished from laid paper.




CHAPTER XIX

=Makers and Dealers in Bookbinders' Materials, Tools and Machinery=


Jos. Bancroft & Sons, manufacturers, Rockford, Wilmington, Del. Book
cloths. Albert D. Smith, 35 and 37 Thomas St., New York, New York agent.

John Campbell & Co., 34 Ferry St., New York. Leathers, book cloths,
marble papers, etc.

Cedric Chivers, 911 Atlantic Ave., Brooklyn, N. Y., and Bath, England.
Binder from publishers' sheets, rebinder, art binder.

Crawley Book Machinery Company, Newport, Ky. Bookbinders' machinery.

Louis De Jonge & Co., 71-73 Duane St., New York. Leather, book cloths,
fancy paper, bookbinders' supplies and machinery.

Dennison's Manufacturing Co., 15 John St., New York. Gummed labels and
other office supplies.

Miss Edith Diehl, 131 E. 31st St., New York. Leather and binding
supplies.

Gane Bros., 81 Duane St., New York. Leathers, cloths, boards,
bookbinders' supplies and machinery of every description.

Thos. Garner & Co., 181 William St., and 22 Spruce St., New York.
Manufacturers of leathers and bookbinders' supplies.

Gaylord Bros., 117 Emerson Building, Syracuse, N. Y. Book repair
material of many kinds.

The H. Griffin & Sons Company, 75-77 Duane St., New York. Leathers,
book cloths, marble papers and bookbinders' materials of every
description.

The Hamilton Manufacturing Company, main office and factory, Two
Rivers, Wis.; eastern office and warehouse, Middletown, N. Y.
Bookbinders' furniture and supplies.

C. B. Hewitt & Brothers, 48 Beekman St., New York. Paper, boards and
glue.

The W. O. Hickok Manufacturing Co., Harrisburg, Pa. Bookbinders'
machinery.

Holliston Mills, Norwood, Mass., and 67 Fifth Ave., New York. Book
cloths.

Hoole Machine and Engraving Works, 29 Prospect St., Brooklyn, N. Y.
Manufacturers of bookbinders' tools and machinery.

Interlaken Mills, 111 Duane St., New York. Book cloths.

Japan Paper Co., 34 Union Square, E., New York. Handmade Japanese
window or Shoji paper for repairing leaves, also called Japanese
mending tissue.

Keratol Company, corner South and Van Buren Sts., Newark, N. J.
Manufacturers of imitation leathers.

Latham Machinery Company, 197-201 S. Canal St., Chicago, Ill.
Manufacturers of bookbinders' and printers' machinery.

Lindenmeyr & Sons, 20 Beekman St., New York. Paper.

J. W. O'Bannon Company, 74 Duane St., New York. Dealers in all
bookbinders' supplies.

Oswego Machine Works, Oswego, N. Y. Bookbinders' machinery.

C. & W. Pyle Company, 4th and Van Buren Sts., Wilmington, Del.
Bookbinders' material.

Schulte & Co., 51 N. 7th St., Philadelphia, Pa. Leather and book cloths.

T. W. & C. B. Sheridan, 56 Duane St., New York. Bookbinders' machinery.

J. L. Shoemaker & Co., 15th and S. 6th Sts., Philadelphia, Pa.
Machinery, paper, leather, etc.

Standard Machine Co., Mystic, Conn. Bookbinders' machinery.

Stark & Selig, 458 W. Broadway, New York. Book stamps and embossing
dies.

F. Wesel Manufacturing Company, 10 Spruce St., New York. Bookbinders'
machinery.




CHAPTER XX

=A Few of the Best Books on Bookbinding, Paper and Leather=


Those marked (S) will be found the most useful books for a small
library.

Adam, Paul. Practical bookbinding. Van Nostrand. New York. 1903. $1.25.
This is a translation from the German, the author being the director of
the Düsseldorf Technical School of Artistic and Practical Bookbinding.
It treats mainly of the practical side of binding and describes with
considerable detail the materials used in the work. It is illustrated
mostly with outline cuts which aid the reader or student to understand
the several methods and processes.

Brassington, W. S. History of the art of bookbinding. Stock. London.
1894. $10.00. Interesting illustrations of ancient records before book
making. Notices of printers, collectors, binders and famous books.
Appendix C gives samples and brief descriptions of oriental forms of
binding. Very good general work.

Butler, J. W. The story of paper making. Butler Paper Co. Chicago.
1901. $1.25. An interesting account of paper making from its earliest
known record down to the present time.

(S) Chivers, Cedric. Improvements in the binding of books. Cedric
Chivers. Bath, England. Free. Description of the methods used by
Chivers in his own bindery. The writer has a high reputation, and
probably binds books more satisfactorily for libraries than any binder
in the world today.

(S) Cockerell, Douglas. Bookbinding and the care of books. Appleton.
New York. 1902. $1.25 net. Text-book of workshop practice from
personal experience and critical examination of methods current in
shops. It supplements workshop training and is a help in the selection
of sound bindings. The best single book for the librarian who wishes to
know about the craft of binding. Does not treat the subject of strong
rebinding for the public library.

Cockerell, Douglas. A note on bookbinding ... with extracts from the
special report of the Society of Arts on leather for bookbinding.
London. Issued by W. H. Smith & Son, for their bookbinding department.
1904. Price 1 penny.

Crane, W. J. E. Bookbinding for amateurs. L. Upcott Gill, London, no
date. Price $0.65. This gives a description of the various tools and
appliances required and minute instruction for their use.

Cundall, Joseph, ed. On bookbindings ancient and modern. Bell, London,
1881. Price $12.00. An excellent history of the art from earliest
times. Contains a chronological list or table of famous bookbinders,
with their nationalities, dates of birth and death.

Fletcher, W. Y., F. S. A. Bookbinding in France. Macmillan & Co., New
York, 1894. $0.75. An accurate brief account of the history and growth
of the art in France. Profusely illustrated, with cuts in the text and
with facsimiles in color.

(S) Gane Brothers. Bookbinders' stock. Free. Gane. 81 Duane St., New
York. A trade catalogue, giving cuts of articles as well as prices.

Growoll, A. The profession of bookselling. 2v. Publisher's Weekly. New
York. 1895. $4.00 net. Contains an excellent article on bookbinding
with descriptions of leather and other cover material, cost and other
details. A list of authorities is given and a description of technical
terms.

Hasluck, Paul N., ed. Bookbinding. David McKay, Philadelphia, 1903.
$0.50. A practical text-book with numerous engravings and diagrams.

Horne, Herbert P. The binding of books. Scribner, New York, 1894.
$2.00. Shows how good decoration on bindings can be made only by those
who understand design.

(S) Hulme, Parker and others. Leather for libraries. Published for the
Sound leather committee of the Library Association, England, by the
Library Supply Company. London. 1905. Price $0.40. A summary of the
report of the committee of the Society of Arts, brought down to date,
and with helpful notes added. Includes small samples of leather.

Journal of the Society of Arts. 4 nos. 20 cents each. London. Sept.
11, 18, 25, Oct. 2, 1903. Four lectures delivered by Julius Hübner,
director of the paper making department, at the Municipal School of
Technology, Manchester, England, giving a practical treatise on paper
making. Also issued as "Cantor Lectures" in one pamphlet, same society.
25 cents.

Journal of the Society of Arts. 20 cents. London. July 5, 1901. Report
of a committee on leather for bookbinding. The decay of leather, a
subject which has attracted a great deal of attention and interest
among librarians and collectors. The best thing for librarians ever
published on leather.

Matthews, Brander. Bookbinding, old and new. Macmillan, New York, 1895.
$3.00. Notes of a book-lover, with an account of the Grolier Club of
New York.

Nicholson, James B. Manual of the art of bookbinding. Baird,
Philadelphia, 1856. $1.00. Instructions in the different branches of
forwarding, gilding, finishing and marbling.

(S) Pearce, W. B. Practical bookbinding. Marshall & Co., London, no
date. 25 cents. A text-book designed to give sufficient help to enable
handy persons to bind their own books. Illustrated with photographs and
drawings.

Prideaux, S. T. An historical sketch of bookbinding. Lawrence. London.
1893. $1.50 net. Intended as a help in the first steps. A chronological
table of French and English sovereigns is added with a bibliography
and explanation of technical terms. An appendix treats of ornamentation.

Public Libraries, June, 1904. Binding number.

Public Libraries, June, 1906. Binding number.

Report of the committee on leather for bookbinding. Edited by Cobham
and Wood for the Society of Arts. London. Bell. 1905. $2.80. Contains
some material on dyeing leather not in the original report; has
numerous illustrations, 12 samples of leather, well printed, bound in
cloth.

Society of Arts--Committee on the deterioration of paper. Report ...
with two appendixes: 1, abstracts of paper on German official tests,
1885-96; 2, correspondence. London. 1898. 25 cents.

Zaehnsdorf, J. W. The art of bookbinding. $1.25. Bell. London. 1880.
$1.25. Step by step an imaginary book is bound, as in an "extra shop,"
to show the amateur how to bind his own book, or how to know a good
binding when purchasing. Illustrations of machinery used are given and
practical receipts.

Zahn, Otto. On art binding. S. C. Toof & Co., Memphis, 1904. $1.50.
Illustrated with half-tone pictures of fine bindings by the author.




=Index=


  Acids used in dyeing, Effects of, 76, 95

  Aldine style, 119

  All-along sewing, 119

  American Russia leather, 154

  Antique, 124

  Arabesque style, 119

  Art canvas, 41, 119

  Art vellum, 120

  Azure tools, 120

  Azured style, 121


  Backing, 33, 121

  Backing boards, 121

  Backing hammer, 122

  Backing machine, 122

  Backing press, 122

  Backs, 121

  Backs, loose, repairing, 81

  Backs, material for, 41

  Band driver, 122

  Band nippers, 122

  Bands, 122

  Bead, 123

  Beating hammer, 124

  Beating stone, 124

  Beveled boards, 124

  Bibliography of bookbinding, 165

  Binder, 124

  Binder's workshop in 1771, 4

  Binders for magazines, 61

  Bindery, equipment, 114

  Binding, flexible, 135

  Binding from publishers' sheets, 20

  Binding materials for backs, 41

  Binding materials for sides, 42

  Binding, mosaic, 147

  Binding records, 110

  Bindings, broken, 124

  Bindings, broken, mending, 80

  Bleed, 124

  Blind tooling, 124

  Blocking press, 125

  Board papers, 125

  Board shears, 125

  Boards, 47, 125

  Boards, binding in, 142

  Boards, broken, repairing, 84

  Boards, pressing, 152

  Bock morocco, 126

  Bodkin, 126

  Bolt, 126

  Book covers, machine-made, 26

  Book list on bookbinding, 165

  Bookbinding terms, 119

  Bosses, 126

  Boston binder, 65

  Broken bindings, mending, 80

  Broken boards, replacing, 84

  Brushes, 86

  Buchan binder, 66

  Buckram, 126

  Buckram, Linen finish, 145

  Buffing, 126

  Buffingette, see Keratol, 143

  Bureau of standards, specifications for book cloth, 43

  Burnishers, 127

  Burnishing, 126


  Calf lined, 127

  Calf, marbled, 146

  Calf, sprinkled, 157

  Calf, Tree-, 160

  Calfskin, 127

  Cancels, 127

  Canvas, 132

  Caps, 127

  Case bindings, 128

  Catchword, 128

  Center tools, 128

  Chivers binder, 66

  Circuit edges, 128

  Clasp, 128

  Cleaning books, 74

  Clearing out, 128

  Cleveland binder, 62, 67

  Clip binders, 63

  Cloth, 86

  Cloth boards, 128

  Cloth, English Imperial Morocco, 41, 141

  Cloth, standards, 43

  Cobden-Sanderson style, 128

  Collating, 128

  Combs, 129

  Copying press, 87

  Corners, 129

  Cost of binding, 20

  Covering (repairing), 82

  Covers, loose, reattaching, 82

  Cowhide, 129

  Cowskin, 41

  Creaser, 129

  Cropped binding, 129

  Crushed leather, 129

  Crushed levant, 129

  Cut flush, 130

  Cutter, 130

  Cutting boards, 87, 130

  Cutting machine, 130

  Cutting press, 130


  Dandy, 130

  Dealers in bookbinding materials, 163

  Decay of leather, 76, 95

  Deckle edge, 131

  Dentelle border, 131

  Derome style, 132

  Diaper, 132

  Divinity calf, 132

  Doublure, 132

  Duck, 132

  Dutch metal, 133


  Eau de Javelle, 142

  Edges, Gaufre, 138

  Edges, gilt, 138

  Edges, soiled, cleaning, 83

  Edges, treatments in binding, 133

  Edition de luxe, 133

  Embossed, 133

  End leaves, 133

  End papers, 134

  End papers, renewal, 80

  End sheets, 45

  English linen, 134

  Eve style, 134

  Extra binding, 134


  Fanfare style, 134

  Fillet, 135

  Finishing, 135

  Finishing press, 135

  Finishing stove, 135

  Flexible binding, 135

  Flexible glue, 135

  Flexible sewing, 137

  Fly leaves, 137

  Fly leaves, removal, 80

  Folder, 87, 137

  Folio, 137

  Fore-edge, 137

  Fore-edges, cutting, 83

  Forwarding, 137

  French guard, 137

  French joint, 34, 50, 137

  French morocco, 137

  Full bound, 138


  Gascon style, Le, 138

  Gathering, 138

  Gaufre edges, 138

  Gauge, 138

  Gilding, 53

  Gilding press, 138

  Gilt, 138

  Gilt edges, 138

  Gilt tops, 138

  Glair, 138

  Glue, 47

  Glue, flexible, 135

  Glue pot, 87

  Goatskin, Niger, 147

  Goffered edges, 139

  Gold cushion, 139

  Gold knife, 139

  Gold leaf, 139

  Gouge, 139

  Grain (leather), 139

  Graining, 139

  Grater, 139

  Grease marks, removal, 85

  Grolier style, 139

  Groove, 140

  Ground glue, 87

  Guard, French, 137

  Guards, 140

  Guards for plates, 48

  Guides, 140

  Guillotine, 140

  Gummed paper, 87


  Half-bound, 140

  Half-title, 141

  Hand letters, 141

  Hand-sewing, 45

  Head and tail, 141

  Head cap, 141

  Heel-ball, 141


  Imperial morocco cloth, 141

  Ink stains, removal, 84

  Inset, 142

  Inside margins, 142

  Inside tins, 142

  Italian style, 119


  Jansen style, 142

  Japanese mending paper, 87

  Japanese mending tissue, 52

  Javelle water, 142

  Johnston binder, 65

  Joint, French, 137

  Joints, 142

  Joints, repairing, 81

  Justification, 143


  Keratol, 143

  Kettlestitch, 143

  Keys, 143

  Kip calf, 144

  Klip binder, 67

  Knife, 87

  Knocking-down iron, 144


  Labels, 57

  Labels, renewal, 77

  Laced in, 144

  Laid paper, 144

  Law sheep, 144

  Leather, 93

  Leather, decay, 76, 95

  Leather, grain in, 139

  Leather, Russia, 154

  Leather, treatment with oil, 76

  Leatherette, 144

  Le Gascon style, 138

  Lettering, 47, 53

  Lettering block, 144

  Lettering box, 144

  Lettering pallet, 148

  Lettering by hand, 55

  Lettering in white ink, 56

  Levant morocco, 145

  Library binding, 17 and foll.

  Life histories of library bindings, 22

  Limp binding, 145

  Linen, English, 134

  Linen-finish buckram, 145

  Lining papers, 133, 145

  Loose backs, repairing, 81

  Loose joints, repairing, 81

  Loose leaves, inserting, 78

  Low buckram, 134

  Lying press, 145


  Magazine binders, 61

  Magazines, binding single copies, 64

  Maioli style, 145

  Maps, mounting, 52

  Maps, repairing, 84

  Marbled calf, 146

  Marbler, 146

  Marbling, 146

  Margins, 142

  Marking books, 57

  Mending books, 68

  Mending tissue, 87

  Millboard, 146

  Mitred, 146

  Morocco, 41, 146

  Morocco, French, 137

  Morocco, Levant, 145

  Morocco, Persian, 150

  Morocco, Turkey, 160

  Morocco cloth, 41, 147

  Morocco cloth, Imperial, 141

  Mosaic binding, 147

  Mottled calf, 147

  Mounting, 52

  Music, binding, 50


  Needles, 87

  Newark library, binding records, 112

  Newark library, binding statistics, 22

  Newark library, repairing methods, 74

  New Haven binder, 65

  Newspapers, binding according to use, 42

  Niger goatskin, 147

  Numbering backs, 53


  Octavo, 148

  Off-set, 148

  Opening, ease of, 23

  Out of boards, 148

  Overcasting, 46, 148


  Pallet, 148

  Pamphlets, binding, 58

  Panel, 148

  Paneling, 149

  Paper, 101

  Paper, determining quality, 109

  Paper, mending, 88

  Paper, laid, 144

  Paper, qualities, 106

  Paper covers, 90

  Paper used in books, 106

  Papering up, 149

  Paring, 149

  Paring knife, 149

  Paste, 85, 88

  Pastewash, 150

  Payne, Roger, style, 150

  Pencil marks removed, 74

  Persian morocco, 150

  Petits fers, 150

  Philadelphia binder, 67

  Pieced space, 150

  Pigskin, 41, 151

  Plane, 151

  Plates, broken-up, 126

  Plates, insertion on guards, 48

  Plates, pressing, 152

  Plough, 151

  Pointille style, 151

  Points, 151

  Polishers, 151

  Powder, 154

  Press, 152

  Press pin, 152

  Pressing boards, 152

  Pressing plates, 152

  Publishers' bindings, cleaning, 75

  Publishers' bindings, statistics of wear, 20


  Quarto, 152

  Quire, 152


  Rag paper, 102

  Rebinding, cost of, 20

  Rebinding for wear, 36

  Rebinding, preparation of books for, 44

  Records of binding, 110

  Recto, 152

  Register, 152

  Repairing books, 68

  Repairing joints, 71

  Re-siding books, 83

  Roan, 153

  Roedde magazine binder, 66

  Roger Payne style, 150

  Rolling machine, 153

  Rolls, 153

  Roulette border, 153

  Rounding, 153

  Rounding hammer, 153

  Roundlet, 153

  Roxburgh binding, 153

  Rubbing, 153

  Rugby wrapping paper for covers, 91

  Ruler, 88

  Run up, 154

  Russia leather, 154


  Saddle-stitched, 154

  Sawing in, 154

  Scissors, 88

  Seme, 154

  Setting the head, 154

  Sewer, 155

  Sewing all along, 119

  Sewing by hand, 27

  Sewing in loose sections, 79

  Sewing, flexible, 137

  Sewing bench, 88

  Sheep, Law, 144

  Sheepskin, 155

  Shelf-back, 156

  Sides, material for, 42

  Signature, 156

  Sixteenmo, 156

  Size, 156

  Skiver, 156

  Slips, 157

  Split leather, 157

  Springfield binder, 66

  Sprinkled calf, 157

  Sprinkled edges, 157

  Squares, 157

  Stabbed, 157

  Stabbing, 157

  Stabbing awl, 126

  Stains, removal, 85

  Stamps, 157

  Standing press, 158

  Start, 158

  Steamboating, 159

  Stitching, 154

  Straight edge, 159

  Style, Grolier, 139

  Style, Le Gascon, 138

  Style, Pointille, 151

  Style, Roger Payne, 150

  Style, Roxburgh, 153

  Super, 159


  Tacky, 159

  Tape, 159

  Thirty-two-mo, 159

  Tapes, sewing on, 32

  Terminology of bookbinding, 119

  Thread, 45, 89, 159

  Tins, Inside, 142

  Tipping-in, 71

  Title, 160

  Tools, 160

  Top cover, 160

  Top edges, 160

  Top gilt, 160

  Top side, 160

  Tops, gilt, 138

  Torn leaves, mending, 75

  Torsion binder, 66

  Tree calf, 160

  Trimming, 160

  Trindle, 160

  Tub, 160

  Turkey morocco, 160

  Turning-up, 160

  Tying-up, 161


  Uncut, 161

  Unopened, 161


  Waste leaves, 161

  Waterproof sheets, 161

  Wearing qualities of leather, 95

  Weis binder, 66

  Whatman paper, 161

  Whipping, 161

  Whipstitching, 45

  White edges, 161

  White ink, 56

  Whole binding, 161

  Wire staples, 162

  Witness, 162

  Wood paper, 101

  Wove paper, 162

       *       *       *       *       *

Transcriber's Notes

Minor typographical errors have been corrected. Old-fashioned spelling
has been left unchanged.


* CORRECTIONS TO THE ORIGINAL TEXT

The following misprints and misspellings have been corrected:

  Page 123 - "sawn" changed to "sewn" ("is so sewn as to let")


* OTHER CHANGES AND NOTES

The following changes to the original text have been made for clarity
or consistency:

  Page 50  - The illustration on this page has been split in two and the
             parts labeled "No. 1" and "No. 2", respectively, in order
             to correspond more clearly with the text in the original
             caption.

  Page 83  - "Residing books." changed to "Re-siding books." to agree
             with Index entry.

  Page 109 - "per cent" changed to "per cent." ("a large per cent. of
             their book fund").

  Page 121 - "(L)" and "(R)" added for clarity to the caption of the
             illustration on this page.


The following variations of a word or descriptive term are common in
the original text and have been retained:

  "bookbinding" and "book-binding"
  "handmade" and "hand-made"
  "saddlestitch", "saddle-stitched" and "saddle-stitching"
  "watermark", "water-marked" and "water-marking"
  "waterproof" and "water-proof"
  "whipstitching" and "whip-stitching"





End of the Project Gutenberg EBook of Notes on Bookbinding for Libraries, by 
John Cotton Dana

*** END OF THE PROJECT GUTENBERG EBOOK 47456 ***