1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
3351
3352
3353
3354
3355
3356
3357
3358
3359
3360
3361
3362
3363
3364
3365
3366
3367
3368
3369
3370
3371
3372
3373
3374
3375
3376
3377
3378
3379
3380
3381
3382
3383
3384
3385
3386
3387
3388
3389
3390
3391
3392
3393
3394
3395
3396
3397
3398
3399
3400
3401
3402
3403
3404
3405
3406
3407
3408
3409
3410
3411
3412
3413
3414
3415
3416
3417
3418
3419
3420
3421
3422
3423
3424
3425
3426
3427
3428
3429
3430
3431
3432
3433
3434
3435
3436
3437
3438
3439
3440
3441
3442
3443
3444
3445
3446
3447
3448
3449
3450
3451
3452
3453
3454
3455
3456
3457
3458
3459
3460
3461
3462
3463
3464
3465
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
3480
3481
3482
3483
3484
3485
3486
3487
3488
3489
3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
3505
3506
3507
3508
3509
3510
3511
3512
3513
3514
3515
3516
3517
3518
3519
3520
3521
3522
3523
3524
3525
3526
3527
3528
3529
3530
3531
3532
3533
3534
3535
3536
3537
3538
3539
3540
3541
3542
3543
3544
3545
3546
3547
3548
3549
3550
3551
3552
3553
3554
3555
3556
3557
3558
3559
3560
3561
3562
3563
3564
3565
3566
3567
3568
3569
3570
3571
3572
3573
3574
3575
3576
3577
3578
3579
3580
3581
3582
3583
3584
3585
3586
3587
3588
3589
3590
3591
3592
3593
3594
3595
3596
3597
3598
3599
3600
3601
3602
3603
3604
3605
3606
3607
3608
3609
3610
3611
3612
3613
3614
3615
3616
3617
3618
3619
3620
3621
3622
3623
3624
3625
3626
3627
3628
3629
3630
3631
3632
3633
3634
3635
3636
3637
3638
3639
3640
3641
3642
3643
3644
3645
3646
3647
3648
3649
3650
3651
3652
3653
3654
3655
3656
3657
3658
3659
3660
3661
3662
3663
3664
3665
3666
3667
3668
3669
3670
3671
3672
3673
3674
3675
3676
3677
3678
3679
3680
3681
3682
3683
3684
3685
3686
3687
3688
3689
3690
3691
3692
3693
3694
3695
3696
3697
3698
3699
3700
3701
3702
3703
3704
3705
3706
3707
3708
3709
3710
3711
3712
3713
3714
3715
3716
3717
3718
3719
3720
3721
3722
3723
3724
3725
3726
3727
3728
3729
3730
3731
3732
3733
3734
3735
3736
3737
3738
3739
3740
3741
3742
3743
3744
3745
3746
3747
3748
3749
3750
3751
3752
3753
3754
3755
3756
3757
3758
3759
3760
3761
3762
3763
3764
3765
3766
3767
3768
3769
3770
3771
3772
3773
3774
3775
3776
3777
3778
3779
3780
3781
3782
3783
3784
3785
3786
3787
3788
3789
3790
3791
3792
3793
3794
3795
3796
3797
3798
3799
3800
3801
3802
3803
3804
3805
3806
3807
3808
3809
3810
3811
3812
3813
3814
3815
3816
3817
3818
3819
3820
3821
3822
3823
3824
3825
3826
3827
3828
3829
3830
3831
3832
3833
3834
3835
3836
3837
3838
3839
3840
3841
3842
3843
3844
3845
3846
3847
3848
3849
3850
3851
3852
3853
3854
3855
3856
3857
3858
3859
3860
3861
3862
3863
3864
3865
3866
3867
3868
3869
3870
3871
3872
3873
3874
3875
3876
3877
3878
3879
3880
3881
3882
3883
3884
3885
3886
3887
3888
3889
3890
3891
3892
3893
3894
3895
3896
3897
3898
3899
3900
3901
3902
3903
3904
3905
3906
3907
3908
3909
3910
3911
3912
3913
3914
3915
3916
3917
3918
3919
3920
3921
3922
3923
3924
3925
3926
3927
3928
3929
3930
3931
3932
3933
3934
3935
3936
3937
3938
3939
3940
3941
3942
3943
3944
3945
3946
3947
3948
3949
3950
3951
3952
3953
3954
3955
3956
3957
3958
3959
3960
3961
3962
3963
3964
3965
3966
3967
3968
3969
3970
3971
3972
3973
3974
3975
3976
3977
3978
3979
3980
3981
3982
3983
3984
3985
3986
3987
3988
3989
3990
3991
3992
3993
3994
3995
3996
3997
3998
3999
4000
4001
4002
4003
4004
4005
4006
4007
4008
4009
4010
4011
4012
4013
4014
4015
4016
4017
4018
4019
4020
4021
4022
4023
4024
4025
4026
4027
4028
4029
4030
4031
4032
4033
4034
4035
4036
4037
4038
4039
4040
4041
4042
4043
4044
4045
4046
4047
4048
4049
4050
4051
4052
4053
4054
4055
4056
4057
4058
4059
4060
4061
4062
4063
4064
4065
4066
4067
4068
4069
4070
|
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;charset=UTF-8" />
<meta http-equiv="Content-Style-Type" content="text/css" />
<title>
The Project Gutenberg eBook of The Decoration of Leather, by Georges de Récy.
</title>
<style type="text/css">
body {margin-left: 12%; margin-right: 12%;}
h1,h2,h3 {text-align: center; clear: both; margin: 2.75em 0 1.75em 0;}
p {margin-top: .75em; text-align: justify; margin-bottom: .75em; text-indent: 2em;}
a:focus, a:active { outline:#ffee66 solid 2px; background-color:#ffee66;}
a:focus img, a:active img {outline: #ffee66 solid 2px; }
hr {width: 33%; margin-top: 1.75em; margin-bottom: 1.75em; margin-left: auto;
margin-right: auto; clear: both;}
hr.tb {width: 20%;}
hr.chap {width: 65%; margin-bottom: 5em;}
hr.full {width: 95%;}
img {text-decoration: none;}
table {margin-left: auto; margin-right: auto;}
.blockquot {margin: .75em 10% .75em 10%; text-align: justify;}
.center {text-align: center;}
.smcap {font-variant: small-caps;}
.smcapac {font-size: 0.8em;}
.caption {font-weight: bold;}
.figcenter {margin: 2.75em auto 1.75em auto; text-align: center;}
.figleft {float: left; clear: left; margin-left: 0; margin-bottom: 1em;
margin-top: 1em; margin-right: 1em; padding: 0; text-align: center;}
.figright {float: right; clear: right; margin-left: 1em; margin-bottom: 1em;
margin-top: 1em; margin-right: 0; padding: 0; text-align: center;}
.footnote {margin-left: 10%; margin-right: 10%; margin-bottom: 0.5em;
font-size: 0.9em; text-align: justify;}
.footnote .label {text-decoration: none;}
.fnanchor {vertical-align: super; font-size: 0.8em; text-decoration: none; position: relative;}
.c3 {font-size: 1.17em; margin: 2.75em 1.75em; font-weight: bolder; text-align: center;}
.c4 {font-size: 1.00em; margin: 2.75em 1.75em; font-weight: bolder; text-align: center;}
.c5 {font-size: 0.83em; margin: 2.75em 1.75em; font-weight: bolder; text-align: center;}
.index {text-align: left; list-style-type: none; text-indent: -6em; padding-left: 6em;}
.list {text-indent: -1em; padding-left: 5em;}
.pagenum {position: absolute; left: 88%; font-size: smaller; text-align: right;
color: gray; margin-top: -0.45em; text-indent: 2em;}
.toc1 {padding-top: 1em;}
.toc2 {padding-left: 1.5em; text-indent: -1em;}
.toc3 {}
.loi1 {}
.loi2 {text-align: left; text-indent: -1em; padding-left: 1.5em; }
.loi3 {padding-bottom: 1em;}
.vertspace-4em {margin-top: 4em;}
</style>
</head>
<body>
<div>*** START OF THE PROJECT GUTENBERG EBOOK 40286 ***</div>
<hr class="full" />
<div class="figcenter" style="width: 251px;"><a id="Book_cover"></a>
<img src="images/cover.jpg" width="251" height="400"
alt="Book cover." />
</div>
<hr class="tb" />
<div class="center" style="width: 20em; margin: auto; border: solid 1px; padding: 1em;">
Transcriber’s Note: The original publication has been replicated faithfully except as listed
<a href="#Changes" name="Start" id="Start">here</a>.<br />
<br />
The text conforms to changes in window size.</div>
<!--005.png--><hr class="tb" />
<div class="figcenter" style="width: 515px;"><a id="frontispiece"></a><a id="plate_1"></a>
<img src="images/i_005.jpg" width="515" height="700"
alt="" />
<span class="caption">1. <span class="smcap">Blind-stamped leather binding of the <i>Winchester
Domesday Book</i>. English, 12th Century.</span></span>
</div>
<!--006.png-->
<h1>THE DECORATION<br />
OF LEATHER</h1>
<div class="c3">FROM THE FRENCH OF<br />
GEORGES DE RÉCY<br />
<small>BY</small><br />
<big>MAUDE NATHAN</big></div>
<div class="c4">WITH ILLUSTRATIONS AND EXAMPLES OF<br />
LEATHER DECORATION FROM VARIOUS<br />
SOURCES<br />
<br />
<hr class="tb" />
<br />
<small>LONDON</small><br />
ARCHIBALD CONSTABLE & CO <span class="smcap">Ltd</span><br />
<small>1905</small></div><!--007.png-->
<div class="c5"><span class="smcap">BUTLER & TANNER,<br />
THE SELWOOD PRINTING WORKS,<br />
FROME, AND LONDON.</span></div>
<hr class="chap" />
<!--008.png--><p><span class="pagenum"><a name="Page_5" id="Page_5">5</a></span></p>
<h2>TRANSLATOR’S NOTE</h2>
<p>In a preface which is omitted from this translation, the author claims for
his work a place between the books dealing solely with the history and
development of the art of working in leather and those of which the object
is to impart a knowledge of the technique of its various processes to
amateurs who may be unable or unwilling to undertake a regular course of
instruction. He points out that leather, in its adaptability to many
different kinds of treatment, is a material eminently suited to the
interpretation of the style of decoration known as “modern art.”</p>
<p>In the French edition there are numerous reproductions of examples of
leather decoration and of ornament intended for adaptation to
leather-work. In the following translation these illustrations and also a
short chapter referring to them are omitted, and some examples of
leather-work derived from various English sources are substituted. The
text of the work has been generally somewhat abridged. The fact that there
are many technical and other terms in French that have no exact equivalent
in our own language, has rendered a free translation desirable, but the
meaning of the original text has been carefully preserved.</p>
<!--010.png-->
<hr class="chap" />
<p><span class="pagenum">7</span></p>
<h2>CONTENTS</h2>
<div class="center">
<table border="0" width="400" cellpadding="4" cellspacing="0" summary="">
<tr><td align="left"> </td><td align="right" class="smcapac">PAGE</td></tr>
<tr><td align="center" class="toc1">TRANSLATOR’S NOTE</td><td align="right" class="toc3"><a href="#Page_5">5</a></td></tr>
<tr><td align="center" class="toc1">INTRODUCTION</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">The Decoration of Leather in the Past</span></td><td align="right" class="toc3"><a href="#Page_13">13</a></td></tr>
<tr><td align="center" class="toc1">CHAPTER I</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">Tools and Leather</span></td><td align="right" class="toc3"><a href="#Page_15">15</a></td></tr>
<tr><td align="center" class="toc1">CHAPTER II</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">Methods of Working in Leather</span></td><td align="right" class="toc3"><a href="#Page_19">19</a></td></tr>
<tr><td align="center" class="toc1">CHAPTER III</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">Leather Mosaic</span></td><td align="right" class="toc3"><a href="#Page_42">42</a></td></tr>
<tr><td align="center" class="toc1">CHAPTER IV</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">Dyes, <i>Patines</i> and Gilding</span></td><td align="right" class="toc3"><a href="#Page_64">64</a></td></tr>
<tr><td align="center" class="toc1">CHAPTER V</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">The Choice of Design and Colour</span></td><td align="right" class="toc3"><a href="#Page_76">76</a></td></tr>
<tr><td align="center" class="toc1">APPENDIX</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">Leather Hangings and Furniture</span></td><td align="right" class="toc3"><a href="#Page_80">80</a></td></tr>
<tr><td align="center" class="toc1">NOTE</td></tr>
<tr><td align="left" class="toc2"><span class="smcap">Some Extracts from the Report of the Committee on Leather
for Bookbinding, appointed by the Council of the Society
of Arts, February, 1900</span></td><td align="right" class="toc3"><a href="#Page_90">90</a></td></tr>
<tr><td align="left" class="toc2"><span class="smcap">Index</span></td><td align="right" class="toc3"><a href="#Page_96">96</a></td></tr>
</table></div>
<hr class="chap" />
<!--012.png--><p><span class="pagenum">9</span></p>
<h2>LIST OF ILLUSTRATIONS</h2>
<h3>ILLUSTRATIONS IN THE TEXT</h3>
<div class="center">
<table border="0" width="400" cellpadding="4" cellspacing="0" summary="">
<tr><td align="left" colspan="2"><span class="smcap">Fig.</span></td><td align="left"><span class="smcapac">PAGE</span></td></tr>
<tr><td align="left"><a href="#fig_1">1.</a></td><td align="left" class="toc2">Tracing-point</td><td align="left"><a href="#Page_20">20</a></td></tr>
<tr><td align="left"><a href="#fig_2">2,</a> <a href="#fig_3">3.</a></td><td align="left" class="toc2">Incising knife used downwards like a pencil</td><td align="left"><a href="#Page_21">21</a></td></tr>
<tr><td align="left"><a href="#fig_4">4,</a> <a href="#fig_5">5.</a></td><td align="left" class="toc2">Incising knife used upwards</td><td align="left"><a href="#Page_22">22</a></td></tr>
<tr><td align="left"><a href="#fig_6">6,</a> <a href="#fig_7">7.</a></td><td align="left" class="toc2">Incising knife held like a graver and pushed forward</td><td align="left"><a href="#Page_23">23</a></td></tr>
<tr><td align="left"><a href="#fig_8">8.</a></td><td align="left" class="toc2">Executing a slanting cut when the edge of the leather is to be subsequently turned up</td><td align="left"><a href="#Page_24">24</a></td></tr>
<tr><td align="left"><a href="#fig_9">9.</a></td><td align="left" class="toc2">Opener</td><td align="left"><a href="#Page_25">25</a></td></tr>
<tr><td align="left"><a href="#fig_10">10.</a></td><td align="left" class="toc2">Enlarging the outline with the opener</td><td align="left"><a href="#Page_25">25</a></td></tr>
<tr><td align="left"><a href="#fig_11">11.</a></td><td align="left" class="toc2">Slanting cut</td><td align="left"><a href="#Page_26">26</a></td></tr>
<tr><td align="left"><a href="#fig_11a">11a.</a></td><td align="left" class="toc2">Showing the difficulty of raising the inner edge <i>A</i></td><td align="left"><a href="#Page_26">26</a></td></tr>
<tr><td align="left"><a href="#fig_12">12.</a></td><td align="left" class="toc2">Lowering the outer edge with a modeller</td><td align="left"><a href="#Page_29">29</a></td></tr>
<tr><td align="left"><a href="#fig_13">13.</a></td><td align="left" class="toc2">Ball-shaped steel tool with handle</td><td align="left"><a href="#Page_32">32</a></td></tr>
<tr><td align="left"><a href="#fig_14">14.</a></td><td align="left" class="toc2">Position of hands in embossing leather</td><td align="left"><a href="#Page_32">32</a></td></tr>
<tr><td align="left"><a href="#fig_15">15.</a></td><td align="left" class="toc2">Tool for working reed decoration</td><td align="left"><a href="#Page_34">34</a></td></tr>
<tr><td align="left"><a href="#fig_16">16.</a></td><td align="left" class="toc2">Using a hand punch</td><td align="left"><a href="#Page_36">36</a></td></tr>
<tr><td align="left"><a href="#fig_17">17.</a></td><td align="left" class="toc2">Cutting-out knife</td><td align="left"><a href="#Page_40">40</a></td></tr>
<tr><td align="left"><a href="#fig_18">18.</a></td><td align="left" class="toc2">Paring knife</td><td align="left"><a href="#Page_43">43</a></td></tr>
<tr><td align="left"><a href="#fig_19">19.</a></td><td align="left" class="toc2">Paring knife</td><td align="left"><a href="#Page_43">43</a></td></tr>
<tr><td align="left"><a href="#fig_20">20.</a></td><td align="left" class="toc2">Paring leather</td><td align="left"><a href="#Page_44">44</a></td></tr>
<tr><td align="left"><a href="#fig_21">21.</a></td><td align="left" class="toc2">Cutting-out knife</td><td align="left"><a href="#Page_46">46</a></td></tr>
<tr><td align="left"><a href="#fig_22">22.</a></td><td align="left" class="toc2">Cutting-out knife</td><td align="left"><a href="#Page_46">46</a></td></tr>
<tr><td align="left"><a href="#fig_23">23.</a></td><td align="left" class="toc2">Cutting-out knife</td><td align="left"><a href="#Page_46">46</a></td></tr>
<tr><td align="left"><a href="#fig_24">24.</a></td><td align="left" class="toc2">Cutting out inlay</td><td
align="left"><a href="#Page_48">48</a><!--013.png--><span class="pagenum">10</span></td></tr>
<tr><td align="left"><a href="#fig_25">25.</a></td><td align="left" class="toc2">Using roller to secure adhesion of inlay</td><td align="left"><a href="#Page_51">51</a></td></tr>
<tr><td align="left"><a href="#fig_26">26.</a></td><td align="left" class="toc2">First position of outlining tool</td><td align="left"><a href="#Page_53">53</a></td></tr>
<tr><td align="left"><a href="#fig_27">27.</a></td><td align="left" class="toc2">Second position of outlining tool</td><td align="left"><a href="#Page_53">53</a></td></tr>
<tr><td align="left"><a href="#fig_28">28.</a></td><td align="left" class="toc2">Gouge outliner</td><td align="left"><a href="#Page_56">56</a></td></tr>
<tr><td align="left"><a href="#fig_29">29.</a></td><td align="left" class="toc2">Outlining wheel</td><td align="left"><a href="#Page_56">56</a></td></tr>
<tr><td align="left"><a href="#fig_30">30.</a></td><td align="left" class="toc2">Gouge outliner</td><td align="left"><a href="#Page_56">56</a></td></tr>
<tr><td align="left"><a href="#fig_31">31.</a></td><td align="left" class="toc2">Straight outliner</td><td align="left"><a href="#Page_56">56</a></td></tr>
<tr><td align="left"><a href="#fig_32">32.</a></td><td align="left" class="toc2">Polishing mosaic</td><td align="left"><a href="#Page_57">57</a></td></tr>
<tr><td align="left"><a href="#fig_33">33,</a> <a href="#fig_34">34.</a></td><td align="left" class="toc2">Sticking inlay on morocco ground with tool (Fig. 33) instead of roller, to avoid crushing the grain</td><td align="left"><a href="#Page_60">60</a></td></tr>
</table></div>
<!--014.png--><p><span class="pagenum">11</span></p>
<h3>FULL-PAGE ILLUSTRATIONS</h3>
<div class="center">
<table border="0" width="400" cellpadding="4" cellspacing="1" summary="">
<tr><td align="left" colspan="2" class="smcapac">PLATE</td><td align="right"><i>Page</i></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_1">1.</a></td><td align="left" class="loi2">Blind-stamped leather binding of the <i>Winchester Domesday Book</i>. English, 12th century.</td><td align="left">(<i><a href="#frontispiece">Frontispiece</a></i>)</td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">Society of Antiquaries, London.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_2">2.</a></td><td align="left" class="loi2">Casket covered with stamped leather, <i>cuir bouilli</i>. German, 14th century.</td><td align="right"><a href="#Page_22">22</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_3">3.</a></td><td align="left" class="loi2">Coffret covered with leather, incised, coloured and gilt. French, 14th century.</td><td align="right"><a href="#Page_24">24</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_4">4.</a></td><td align="left" class="loi2">Casket covered with embossed leather, <i>cuir bouilli</i>. French, early 15th century.</td><td align="right"><a href="#Page_28">28</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_5">5.</a></td><td align="left" class="loi2">Case of cut and embossed leather, <i>cuir bouilli</i>. Italian, 15th century.</td><td align="right"><a href="#Page_32">32</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_6">6.</a></td><td align="left" class="loi2">Blind-stamped morocco binding with gilt roundels and coloured cameo design. <i>Celsus.</i> <i>De Medicina.</i> <i>Venice</i>, 1477. Italian, 15th century.</td><td align="right"><a href="#Page_37">37</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">British Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_7">7.</a></td><td align="left" class="loi2">Case of cut and punched leather. German, 15th century.</td><td align="right"><a href="#Page_40">40</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_8">8.</a></td><td align="left" class="loi2">Brown leather binding, cut and engraved, with punched background. <i>German MS. Chronicle of Events.</i> German, 15th century.</td><td align="right"><a href="#Page_44">44</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">Bodleian Library, Oxford.</span><span class="pagenum">12</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_9">9.</a></td><td align="left" class="loi2">Cover of case for a cup in wood covered with leather, <i>cuir bouilli</i>, cut, embossed, painted and gilt. Italian, about 1500.</td><td align="right"><a href="#Page_49">49</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.<!--015.png--></span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_10">10.</a></td><td align="left" class="loi2">Cover of work-box of wood covered with embossed leather, <i>cuir bouilli</i>. German, 16th century.</td><td align="right"><a href="#Page_56">56</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_11">11.</a></td><td align="left" class="loi2">Powder-flask of wood covered with leather, <i>cuir bouilli</i>, cut and embossed. Italian, 16th century.</td><td align="right"><a href="#Page_56">56</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_12">12.</a></td><td align="left" class="loi2">Shield of cut and embossed leather, <i>cuir bouilli</i>. Italian, 16th century.</td><td align="right"><a href="#Page_60">60</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_13">13.</a></td><td align="left" class="loi2">Top of casket covered with brown calf, cut and slightly embossed. By Florence Hornblower. Modern English.</td><td align="right"><a href="#Page_65">65</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_14">14.</a></td><td align="left" class="loi2">Embossed and punched brown calf binding. <i>Rubáiyát of Omar Khayyám.</i> Designed by Mary G. Houston. Modern English.</td><td align="right"><a href="#Page_66">66</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_15">15.</a></td><td align="left" class="loi2">Mirror case of punched black leather, <i>cuir bouilli</i>. Executed by Miss Casella. Modern English.</td><td align="right"><a href="#Page_71">71</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_16">16.</a></td><td align="left" class="loi2">Black morocco binding with applied panels of tooled, cut, painted and gilt calf. <i>Le Roman de Tristan et Iseut.</i> Designed by Robert Engels. Modern French.</td><td align="right"><a href="#Page_74">74</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_17">17.</a></td><td align="left" class="loi2">Binding of stained calf, cut, embossed, tooled and <i>patinated</i>. By Henri Godin. Modern French.</td><td align="right"><a href="#Page_78">78</a></td></tr>
<tr><td> </td><td align="right" class="loi3"><span class="smcap">South Kensington Museum.</span></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_18">18.</a></td><td align="left" class="loi2">Gold-tooled and inlaid morocco binding. <i>The Letters of Princess Lieven.</i> By S. T. Prideaux. Modern English.</td><td align="right"><a href="#Page_82">82</a></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_19">19.</a></td><td align="left" class="loi2">Back and seat of chair in cut, embossed and gilt cowhide with punched background. Executed by Rosalie Vigers from a design by Frederick Vigers. Modern English.</td><td align="right"><a href="#Page_84">84</a></td></tr>
<tr><td align="left" class="loi1"><a href="#plate_20">20.</a></td><td align="left" class="loi2">Embossed calf binding. <i>Book of Common Prayer.</i> Executed by Rosalie Vigers from a design by Frederick Vigers. Modern English.</td><td align="right"><a href="#Page_86">86</a></td></tr>
</table></div>
<hr class="chap" />
<!--016.png--><p><span class="pagenum"><a name="Page_13" id="Page_13">13</a></span></p>
<h2>INTRODUCTION</h2>
<div class="c3">THE DECORATION OF LEATHER IN THE PAST</div>
<p>The following remarks, without attempting a description in detail of the
different phases through which the art of decorating leather has passed
since its origin in primitive times, deal with the treatment of leather
solely from the decorative point of view, the present volume being limited
to the consideration of this aspect of the subject.</p>
<p>In all ages man has sought to develop to their fullest extent the
possibilities of splendour in the materials of his dress, and an important
place in the wardrobes of our early ancestors was filled by skins shorn of
hair, thus lending themselves easily to decoration in many different ways.</p>
<p>The nomadic races, described to us as at first riding their horses
barebacked to the conquest of the West, soon adopted ornamental trappings
more suited to their position as conquerors, as shown by the marvellous
mosaics of piqué leather which from an early date constituted the
foundation of the war-like equipment of the Tartars and Moguls.</p>
<p>In addition to magnificently woven materials and damascened arms, the
Crusaders brought back with them to Europe, leather ornamented with wool,
silk and precious metals. Europe set itself to imitate this art of working
in leather, and found a source of faultless taste and purest models in
Spain, then occupied by the Moors.</p>
<p>For several centuries the art of decorating
leather<!--017.png--><span class="pagenum"><a name="Page_14" id="Page_14">14</a></span>
remained the
speciality of Spain. The word “cordwainer,” derived from Cordova, is a
witness of this monopoly by the Peninsula of everything connected with
leather-work, apart from the modelled and stamped leathers, introduced
into Venice from the East.</p>
<p>Other countries, however, were doing better work than that of imitating
the celebrated manufactures of Cordova. In Germany especially, leather was
discovered to be an ideal material for rendering the mantles and plumed
helmets of heraldry, while the marvels of carved and embossed leather
preserved in the Dijon Museum are a proof of the interest taken in
leather-work by the great decorative school of the court of Burgundy.</p>
<p>In the Middle Ages precious stuffs adorned with enamels, ivory and gold
were discarded as covering for the beautiful manuscripts executed by the
monks, and in their place heraldic subjects in carved and modelled leather
were introduced and lent a new character to books which were no longer the
exclusive property of crowned heads. The invention of printing afforded
the Renaissance movement the means of attaining its full development, and
soon called for a less archaic binding for its incunabula. Leather either
decorated in mosaic or tooled in gold formed a perfect covering for these
marvels of typography, and from the end of the fifteenth century to the
present revival of decorated leather both styles have been much in use.</p>
<p>There are various standard works on this subject, which may be consulted
by those desirous of studying its development further.</p>
<hr class="chap" />
<!--018.png-->
<p><span class="pagenum"><a name="Page_15" id="Page_15">15</a></span></p>
<h2>CHAPTER I</h2>
<div class="c3">TOOLS AND LEATHER</div>
<h3>TOOLS</h3>
<p>The few tools essential in leather-work are illustrated in the text, where
their use is described. They comprise:</p>
<p>1. A Lithographic Stone or a Slab of Marble (preferably the former).</p>
<p>2. A Tracing-point and some 6H Graphite Pencils.</p>
<p>3. An Incising Knife.</p>
<p>4. Modellers of different sizes.</p>
<p>5. An Opener.</p>
<p>Special tools, Punches, Wheels etc., are treated of at greater length in
dealing with the different processes in which they are used.</p>
<h3>CHOICE OF SKINS</h3>
<p>The art of working in leather is now so general that it is not difficult
to obtain skins specially prepared for the purpose. It is an essential
qualification that nothing of a fatty nature be used in their preparation.
The tanning process of the best skins, whether with a glossy surface
artificially obtained by rolling or with a dull surface, should be a very
simple one. Oak and sumach tannins (used especially for morocco leather)
are those which best preserve the suppleness and capillarity of leather.
The susceptibility of its colour to alteration from
exposure<!--019.png--><span class="pagenum"><a name="Page_16" id="Page_16">16</a></span>
to light is
greatly influenced by the materials used in tanning. Oak wood and chestnut
are the tannins least influenced by light. Skins tanned with <i>cassaigre</i>
and mimosa, light at first, become darkened in a marked degree by
exposure.<a name="Anchor-1" id="Anchor-1"></a><a href="#Footnote-1"
class="fnanchor" title="Go to footnote 1.">[1]</a></p>
<div class="footnote">
<p><a name="Footnote-1" id="Footnote-1"></a><a class="label" title="Return to text." href="#Anchor-1">[1]</a> See the observations on the importance of the tanning process
in the preservation of leather, in the Note at the end of this volume.</p></div>
<p>So many varieties of leather are on the market that some guide will be
found useful in selecting the most suitable for the different methods of
decoration. These methods may be classified as follows:</p>
<dl class="list">
<dt>Cut, or engraved leather.</dt>
<dt>Carved leather.</dt>
<dt>Punched or hammered leather.</dt>
<dt>Modelled leather.</dt>
<dt>Modelled leather with punched background.</dt>
<dt>Leather decorated by pyrogravure and pointogravure.</dt>
<dt>Stamped leather.</dt>
<dt>Open-work leather.</dt>
<dt>Leather mosaic.</dt>
</dl>
<p>The leathers which may be used in these various styles of decoration are</p>
<dl class="list">
<dt>Sheep-skin.</dt>
<dt>Cow-hide.</dt>
<dt>Calf.</dt>
<dt>Ox-hide.</dt>
<dt>Morocco.</dt>
<dt>Russia.</dt>
<dt>Pig-skin.</dt>
<dt>Chamois.</dt>
<dt>Vellum.</dt>
</dl>
<p>Sheepskin does not lend itself either to incising or to carving and is
only useful for cheap work; it is very malleable and models easily, but
for that reason lacks the firmness of calf when modelled. It is also not
possible to get such good colour results with sheep-skin as
with<!--020.png--><span class="pagenum"><a name="Page_17" id="Page_17">17</a></span>
calf,
cow-hide, or ox-hide. It can be used for large work, such as
wall-hangings, screens, etc., but is not recommended. Beginners, however,
will find it useful on account of its low price.</p>
<p>Cow and calf are the most suitable leathers for really artistic work.
Cow-hide may be obtained with either a glossy or a dull surface; the dull
skins are sold specially prepared for decorating and give good results,
the smoothness of their surface making them particularly suitable for
modelling and pyrogravure.</p>
<p>Calf varies greatly in thickness and colour. It should be noted that in
carved and modelled work the advantages of great malleability in the
material are more than counterbalanced by the disadvantages; durable
results cannot be obtained with very malleable leather which yields easily
to the tool, and since high relief can be worked without difficulty in
comparatively thick leather by damping it, its use is much to be
preferred.</p>
<p>Ox-hide is frequently as thick as strong cardboard and is the ideal
leather for carving, hammering and pyrogravure. In cut decoration a better
effect can be obtained with this leather than with thinner skins, and
being very firm, it is equally suitable for modelling.</p>
<p>Morocco leather, which is mostly of the kind called “Cape morocco,” is
goat-skin with a grained surface produced by pressing hard seeds upon the
skin while it is still damp from the tanning. For bookbinding and similar
purposes this grain is crushed by pressing hot plates heavily on the
surface. The only way of decorating leather so treated is by an inlay (or
literally <i>onlay</i>) of skins of other colours, and is known as Leather
Mosaic.<a name="Anchor-2" id="Anchor-2"></a><a href="#Footnote-2"
class="fnanchor" title="Go to footnote 2.">[2]</a></p>
<div class="footnote">
<p><a name="Footnote-2" id="Footnote-2"></a><a class="label" title="Return to text." href="#Anchor-2">[2]</a> See the chapter on Leather Mosaic, p. <a href="#Page_42">42</a>.</p></div>
<p>The so-called Russia leather is generally very light and soft and well
adapted to modelling on wax. It should not be cut.</p>
<p>Pig-skin is very firm and was formerly much used
for<!--021.png--><span class="pagenum"><a name="Page_18" id="Page_18">18</a></span>
the fine stamped
bindings of the fifteenth, sixteenth, and seventeenth centuries. It does
not lend itself well to carving, but is very suitable for pyrogravure
because of the contrast between its light tint and the dark brown mark
produced by the hot tool.</p>
<p>Chamois leather, which is not always prepared from the skins of deer or
chamois, is only suitable for flat ornament. It may be decorated by
pyrogravure or with stencilled ornament, or used in its natural colour as
background to an open-work pattern of leather of another colour.</p>
<p>Vellum, a very thin and stiff white skin, can be decorated with brush or
pen-work. It is principally used for bookbinding. Those who wish to paint
on vellum can draw their inspiration from the marvellous miniatures of the
Middle Ages: a description of this style of decoration, however, does not
come within the scope of the present work.</p>
<hr class="chap" />
<!--022.png-->
<p><span class="pagenum"><a name="Page_19" id="Page_19">19</a></span></p>
<h2>CHAPTER II</h2>
<div class="c3">METHODS OF WORKING IN LEATHER</div>
<h3>TRACING THE DESIGN ON THE LEATHER</h3>
<p>In this chapter the different processes which may be used in the
decoration of leather will each be described in turn.</p>
<p>The preliminary operation of tracing the design on the leather is however
common to them all.</p>
<p>The design should in the first instance be drawn on fairly thick
tracing-paper or architect’s linen. This should then be fixed on the
leather in such a way that it does not move during the transfer of the
design, but so that it is possible to lift it to ascertain the progress of
the work. It will be found convenient to fold the edge of the
tracing-paper over the top edge of the leather and fix it with seccotine.</p>
<p>The leather must be wet in order to take the impression of the tracing. A
soft, slightly damp sponge is passed several times evenly over the whole
surface; if only a part of the leather were wetted an aureole would form
round that part and would leave a permanent mark. When the leather has
once been wetted all over there is no further fear of this, and it may
then be damped again in parts when necessary. Practice alone will make it
possible to judge accurately the degree of saturation that each skin
requires to bring it into a fit condition for working on; speaking
generally, the water should have penetrated the leather so that the
pressure of the tool will not bring it back to
the<!--023.png--><span class="pagenum"><a name="Page_20" id="Page_20">20</a></span>
surface. Neglect of
this rule might result in staining the leather.</p>
<div class="figcenter" style="width: 515px;"><a id="fig_1"></a>
<img src="images/i_023.png" width="515" height="44"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 1.—<span class="smcapac">TRACING-POINT</span></span>
</div>
<p>The design is transferred to the leather by means of a metal tracing-point
(Fig. 1). An agate or ebony point, or an exceedingly hard 6H graphite
pencil, may also be used for the purpose. The pencil possesses the
additional advantage that it can be given a very fine point where an extra
thin and sharp outline is required. Doubling the outline by going over it
twice should be avoided. From time to time the tracing-paper or linen
should be raised to see that the design is being well marked on the
leather. The outline should be dark; when it comes light it is a proof
that the leather is too dry and requires damping again.</p>
<h3>INCISING THE LEATHER</h3>
<p>This being the first operation in working thick leather by carving,
engraving and modelling, it will be dealt with before passing to the
different processes peculiar to these methods of decoration. The incising
is done after the design has been traced. There are numerous incising
knives for the purpose which vary in shape and are manipulated in
different ways; no one of them can be specially recommended as notably
superior to the rest, and the artist should choose the one with which he
feels most likely to succeed. The knife illustrated in Fig. 2 is used with
a downward movement and is held—as shown in Fig. 3—very short, so as to
obtain a sufficient purchase over the blade which is guided by the middle
finger. The knife illustrated in Fig. 4 is used upwards. Fig. 5 shows the
manner in which it should be held to produce a vertical cut. It will be
found of great assistance in making a good firm cut to guide the right
hand<!--026.png--><span class="pagenum"><a name="Page_21" id="Page_21">21</a></span>
with the left hand as in Fig. 5. When curved lines are to be cut,
the left hand must be used to turn the leather so as to present it in the
most favourable position for the operation of the blade. The third knife
(Fig. 6) is held like a graver with the handle supported against the palm
of the hand and is pushed forward (Fig. 7). It is useful in cutting curved
lines over a large surface. The depth of the incision should vary
according to the
effect<!--027.png--><span class="pagenum"><a name="Page_22" id="Page_22">22</a></span>
to be produced by the subsequent operation, but
it should never exceed a third of the thickness of the skin.</p>
<div class="figcenter" style="width: 700px;"><a id="plate_2"></a>
<img src="images/i_024.png" width="700" height="311"
alt="" />
<span class="caption">2. <span class="smcap">Casket covered with stamped leather, <i>cuir
bouilli</i>. German, 14th Century.</span></span>
</div>
<div class="figcenter" style="width: 379px;"><a id="fig_2"></a><a id="fig_3"></a>
<img src="images/i_026.png" width="379" height="470"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 2, <span class="smcapac">FIG.</span> 3.—<span class="smcapac">INCISING KNIFE USED DOWNWARDS LIKE A
PENCIL</span></span>
</div>
<p>Thin skins should rarely be cut, and, if they are cut, the incision should
barely penetrate the surface. On ox-hide the depth of the cut may be
considerable without danger of impairing the strength of the leather.</p>
<div class="figcenter" style="width: 373px;"><a id="fig_4"></a><a id="fig_5"></a>
<img src="images/i_027.png" width="373" height="383"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 4, <span class="smcapac">FIG.</span> 5.—<span class="smcapac">INCISING KNIFE USED UPWARDS</span></span>
</div>
<p>When the leather is to be modelled in high relief, the design should be
well separated from the background in the cutting process. The incision
should also be deep when the outline is to be accentuated afterwards with
a<!--028.png--><span class="pagenum"><a name="Page_23" id="Page_23">23</a></span>
tool called an “opener” (Fig. 9) to produce an effect like the leading
in stained glass.</p>
<p>Should it be desired to raise and turn up the edge of the leather to
simulate a leaf, petal, or piece of ribbon detached from the background,
the knife must be held slanting, as in Fig. 8, so as to make an almost
horizontal cut.</p>
<div class="figcenter" style="width: 368px;"><a id="fig_6"></a><a id="fig_7"></a>
<img src="images/i_028.png" width="368" height="370"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 6, <span class="smcapac">FIG.</span> 7.—<span class="smcapac">INCISING KNIFE HELD LIKE A GRAVER
AND PUSHED FORWARD</span></span>
</div>
<p>However thick the leather may be, it is important that two lines should
never be cut quite up to the point of intersection. For example, in
cutting the outline of a leaf, the points of the indentations should be
left uncut to avoid the tendency of the part within the angle to project
and turn back. Sufficient impression can
be<!--029.png--><span class="pagenum"><a name="Page_24" id="Page_24">24</a></span>
obtained with the modelling
tool to give a finished effect to these points.</p>
<div class="figcenter" style="width: 364px;"><a id="fig_8"></a>
<img src="images/i_029.png" width="364" height="507"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 8.—<span class="smcapac">EXECUTING A SLANTING CUT WHEN THE EDGE OF
THE LEATHER IS TO BE SUBSEQUENTLY TURNED UP</span></span>
</div>
<p>The incision must be clean and sharp, and absolutely vertical, except
where it is made slanting for the purpose described above.</p>
<div class="figcenter" style="width: 651px;"><a id="plate_3"></a>
<img src="images/i_030.png" width="651" height="441"
alt="" />
<span class="caption">3. <span class="smcap">Coffret covered with leather, incised, coloured
and gilt. French, 14th Century.</span></span>
</div>
<!--032.png-->
<p><span class="pagenum"><a name="Page_25" id="Page_25">25</a></span></p>
<h3>CUT OR ENGRAVED LEATHER</h3>
<div class="figcenter" style="width: 370px;"><a id="fig_9"></a><a id="fig_10"></a>
<img src="images/i_032.png" width="370" height="510"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 9.—<span class="smcapac">OPENER</span><br /><span class="smcapac">FIG.</span> 10.—<span class="smcapac">ENLARGING THE OUTLINE
WITH THE OPENER</span></span>
</div>
<p>Leather with flat decoration in outline of even thickness is called cut,
or engraved leather. The tool used to enlarge and accentuate the outline
is called an opener. It is like a straight modeller broadened in the
centre and with a blunt point (Fig. 9), or a small blade with the
point<!--033.png--><span class="pagenum"><a name="Page_26" id="Page_26">26</a></span>
cut off square and the angles rounded. When the leather has been well
wetted and the water has thoroughly soaked in, the end of the opener is
inserted in the incision and pushed along it with a very slight and gentle
gliding movement. The broader part of the opener will act as a wedge and
widen the cut evenly. Openers can be had in various sizes to produce lines
of different width. When the design is to be modelled afterwards, an
opener should be used which broadens on the right side only; held slightly
slanting, it will press down the outside edge of the incision which is to
be sunk into the ground. Fig. 10 shows the manner of holding the tool; it
should be worked backwards and forwards to make sure that the edges are
evenly parted. The left hand may help to guide the point to prevent it
from slipping off the line.</p>
<div class="figcenter" style="width: 325px;"><a id="fig_11"></a>
<img src="images/i_033_.png" width="325" height="102"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 11.—<span class="smcapac">SLANTING CUT</span></span>
</div>
<div class="figcenter" style="width: 326px;"><a id="fig_11a"></a>
<img src="images/i_033_2.png" width="326" height="103"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 11a.—<span class="smcapac">SHOWING THE DIFFICULTY OF RAISING THE
INNER EDGE</span> (A)</span>
</div>
<p>To be able to accomplish satisfactorily this operation of opening the
outline, it will be found that the incision must be absolutely vertical.
Supposing it to have been made slanting as in Fig. 11, it will be easy to
sink the outer edge (B) into the ground, but when it comes to raising the
inner edge (A) an excess of material will be encountered which will offer
stubborn resistance to being raised in a direction contrary to that of the
incision (Fig. 11a). The opener should not be moved at too great an angle
in the incision as the point, though blunt, may yet be sharp enough to cut
and spoil the modelling by raising the surface of the leather.</p>
<p>After it has been outlined, the leather may be
further<!--034.png--><span class="pagenum"><a name="Page_27" id="Page_27">27</a></span>
decorated by
variously tinting the parts within the lines, if the style of the design
will admit of such treatment; an effect similar to leather mosaic is thus
produced. (See Chapter III.)</p>
<p>Pyrogravure, or engraving with a hot tool (see p. <a href="#Page_36">36</a>), gives a very
similar effect to that of cut or engraved leather, the only difference in
the appearance of the work thus decorated being due to the slight burr of
the edges and the darkening of the line caused by the hot tool. This
effect of dark colour can, however, be added to cut leather by colouring
the lines with a dye applied with a fine brush. In order to prevent the
colour penetrating and spreading beyond the lines, the latter should be
lightly coated with paste before the dye is applied.</p>
<h3>CARVED LEATHER</h3>
<p>Great expertness is required in carving leather, that is to say, in
producing lines so deep that the design stands out sufficiently from the
background to allow of its being ornamented by independent lines less
deeply worked.</p>
<p>Some leather cases from the Dijon Museum, which were exhibited at the
Petit Palais in Paris in the year 1900, are good examples of carving, and
the manner in which they are finished with touches of gold is very
characteristic. The style and method of production of these examples may
well be imitated. Decoration on ogee-shaped lines is to be avoided, as,
however artistically treated, it is apt to bring to mind the stamped
leather of the so-called “Cathedral Style,” specimens of which filled the
libraries of the romantic period of about 1830.</p>
<p>Besides the tools enumerated above, some artists use the gravers and
gouges employed in chasing metal and wood-carving, but a great deal of
practice is necessary for their proper handling, and they cannot be
recommended to the inexperienced worker.</p>
<!--035.png-->
<p><span class="pagenum"><a name="Page_28" id="Page_28">28</a></span></p>
<p>Pyrogravure is an alternative method of producing strongly accentuated
lines, and by the judicious use of punches an infinite variety of
interesting background effects can be obtained.</p>
<p>Before leaving the subject of carved leather, mention must be made of
<i>cuir bouilli</i>, which was used in conjunction with it during the Middle
Ages, chiefly for sheaths and cases, and is now unfortunately a lost
art.<a name="Anchor-3" id="Anchor-3"></a><a href="#Footnote-3"
class="fnanchor" title="Go to footnote 3.">[3]</a>
Mons. de Saint André de Lignereux, in <i>Le Cuir d’Art français</i>,
tells us that the leather was boiled with gums and resins obtained from
the East, and moulded and cut while still soft from this
treatment.<a name="Anchor-4" id="Anchor-4"></a><a href="#Footnote-4"
class="fnanchor" title="Go to footnote 4.">[4]</a></p>
<div class="footnote">
<p><a name="Footnote-3" id="Footnote-3"></a><a class="label" title="Return to text." href="#Anchor-3">[3]</a> An example of modern English work in leather treated in a
somewhat similar manner is given in Plate 15.</p></div>
<div class="footnote">
<p><a name="Footnote-4" id="Footnote-4"></a><a class="label" title="Return to text." href="#Anchor-4">[4]</a> <i>Le Cuir d’Art français</i>, par Saint André de Lignereux,
Etampes, 1900.</p></div>
<h3>PUNCHES</h3>
<p>Punches are steel or brass tools, having at the point a design cut in
relief or in intàglio, which are impressed on the leather either by the
hand alone or with a hammer The design is thus reproduced on the leather
with the impression contrary to that on the tool. For hand pressure only,
they should be fixed in wooden handles to afford greater grip and power.
They may be used hot; the design will then appear darkened on the leather.</p>
<p>Punches are also employed in tooling with gold leaf, or in burnishing the
impression of their surface on groundwork gilded with shell gold.</p>
<h3>HAMMERED LEATHER</h3>
<p>Leather decorated entirely by means of punches is called hammered leather.
It is used in the style of decoration described later under the name of
modelled leather with punched background, and can also be employed with
great advantage in conjunction with carved leather.</p>
<div class="figcenter" style="width: 674px;"><a id="plate_4"></a>
<img src="images/i_036.png" width="674" height="286"
alt="" />
<span class="caption">4. <span class="smcap">Casket covered with embossed leather, <i>cuir
bouilli</i>. French, early 15th Century.</span></span>
</div>
<h3>MODELLED LEATHER</h3>
<p>Leather may be modelled in two ways; with a
cut<!--038.png--><span class="pagenum"><a name="Page_29" id="Page_29">29</a></span>
outline or with the
traced outline merely accentuated with the tracing-point or opener. In the
former case the leather must be fairly thick, in the latter it may be thin
calf or Russia, which is very soft and delicate.</p>
<div class="figcenter" style="width: 360px;"><a id="fig_12"></a>
<img src="images/i_038.png" width="360" height="499"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 12.—<span class="smcapac">LOWERING THE OUTER EDGE WITH A MODELLER</span></span>
</div>
<p>Leather modelled after being cut should, when finished, have the
appearance, with regard to the relief, of a metal or modelled wax plaque.
The leather takes the
desired<!--039.png--><span class="pagenum"><a name="Page_30" id="Page_30">30</a></span>
shape easily, and should therefore be
delicately handled.</p>
<p>The great charm of modelled leather lies in the softness of its forms, and
care must be taken to avoid irregularly cut outlines which disagreeably
arrest the eye by failing to merge into the ground.</p>
<p>Faulty incisions, or those too deeply cut, are liable to leave a light
line between the modelled subject and the background, due to the cut
having exposed not only the surface, but the inner substance of the
leather. This light line will also have a tendency to appear if the
modelling is not done directly after the opening of the lines, or if they
are too widely opened, or if the opener is too sharp and unduly deepens
the cut. The fault can be remedied by staining the line to match the
surface of the leather.</p>
<h3>MODELLING TOOLS</h3>
<p>The tools used for modelling are not numerous; two or three modellers,
more or less fine and of different curves, (Fig. 12) are sufficient. A
special tool, called <i>Pied de Biche</i> (hind’s foot) in allusion to its
shape, is also useful in depressing the ground at right angles to the
modelling. Modellers may be either of nickelled steel or of brass,
provided that the convex side with which the leather is modelled be
perfectly smooth. It is better not to use ordinary steel which, when the
leather is wet, might cause it to become stained through the rusting of
the tool occasioned by the materials used in tanning. It may also be
mentioned here that when using acids for
<i>patine</i>,<a name="Anchor-5" id="Anchor-5"></a><a href="#Footnote-5"
class="fnanchor" title="Go to footnote 5.">[5]</a>
steel tools should
be kept away from the work. Hydrochloric acid in particular will rust them
so badly in a single night as to make them unusable unless they are
repolished.</p>
<div class="footnote">
<p><a name="Footnote-5" id="Footnote-5"></a><a class="label" title="Return to text." href="#Anchor-5">[5]</a> See note to page <a href="#Page_64">64</a>.</p></div>
<h3>EMBOSSING LEATHER</h3>
<p>When the leather is thick it must be thoroughly wetted on both sides; it
is then taken in the left hand, the
portion<!--040.png--><span class="pagenum"><a name="Page_31" id="Page_31">31</a></span>
to be embossed being between
the forefinger and thumb, which are laid flat on the surface of the
leather, while the other three fingers form the under part of this species
of clamp, and ensure the leather remaining steady (Fig. 14). Steel clamps
are made for fixing the end of the leather to the table, but the system of
holding it in
the<!--041.png--><span class="pagenum"><a name="Page_32" id="Page_32">32</a></span>
hand is preferable, except for very large work, as it
can be more readily moved about.</p>
<div class="figcenter" style="width: 370px;"><a id="fig_13"></a><a id="fig_14"></a>
<img src="images/i_040.png" width="370" height="465"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 13.—<span class="smcapac">BALL-SHAPED STEEL TOOL WITH HANDLE</span><br />
<span class="smcapac">FIG.</span>
14.—<span class="smcapac">POSITION OF HANDS IN EMBOSSING LEATHER</span></span>
</div>
<p>A modeller or a tool consisting of a small steel ball with a handle (Fig.
13) is then worked backwards and forwards with more or less pressure on
the back of the leather until the desired degree of relief is obtained. It
is possible to work very high relief by this method.</p>
<p>Another way of embossing in high relief, which we believe to be here
described for the first time, is as follows: The outline of the design
must first be traced on the flesh side of the leather. This is done by
placing blue transfer paper under the leather, with the blue side
uppermost, while the design is being transferred to the surface of the
leather with the tracing-point in the manner described on p. <a href="#Page_20">20</a>. A chamois
leather bag, about 16 × 12 inches in size, is filled with very fine,
carefully sifted sand, and then sewn up as tightly as possible, so that
the surface is quite taut. The bag is placed on the table, and the leather
face downwards upon it. The steel ball is then rubbed to and fro, on the
flesh side of the leather, at the point to be embossed, and the relief is
produced as the sand yields under the pressure of the tool. The sand gives
enough support to the leather, however, to prevent it stretching too much,
as it would be liable to do if merely extended over a frame.</p>
<p>The next process is to open the incisions. This is not done till after the
leather has been embossed in order not to further impair the strength of
the leather at the outline, already diminished to some extent by cutting.
The object of opening the incision is to facilitate the flattening of the
outer edge so that it merges into the ground and the graduated modelling
of the inner edge to form the softened outline of the ornament in relief.</p>
<div class="figcenter" style="width: 428px;"><a id="plate_5"></a>
<img src="images/i_042.png" width="428" height="477"
alt="" />
<span class="caption">5. <span class="smcap">Case of cut and embossed leather, <i>cuir
bouilli</i>. Italian, 15th Century.</span></span>
</div>
<p>To obtain this soft effect, the modeller is gently passed from left to
right over the angle formed by the inner edge of the incision and the
surface of the modelling.
The<!--044.png--><span class="pagenum"><a name="Page_33" id="Page_33">33</a></span>
tool may be lifted and the leather turned
about to place it in the right position for this movement. The leather is
frequently wetted (but not to such a degree, however, that the water oozes
out of the surface when the modeller is used), and assumes the substance
of wax. Should it show a tendency to rise after it has been depressed, it
must be gone over again with the tool; if the leather is of good quality,
it will keep the modelling permanently when it is once dry.</p>
<p>Care must be taken to avoid making a false impression; the least contact
of the tool with the leather will leave a mark on the damp surface, which
it is not always possible to efface from beneath.</p>
<p>Having dealt with cut and modelled leather, we now turn to modelling
without cutting, the outline of the design being first simply marked out
with the tracing-point, or with the opener held very slanting to avoid
wrinkling the surface of the skin. This process should be adopted in
preference to the preceding one, for comparatively thin skins which would
not bear cutting. The relief may be obtained in the manner described above
by working it up from the back of the leather, or the leather may be laid
surface upwards on a cake of wax and the design brought out in low relief
by depressing the background with the tool. Better results are obtained
with the latter method. The wax is applied under the parts to be modelled,
which must be accurately marked out for this purpose on the under side of
the leather, and thin paper is pasted underneath it to keep it in place
and prevent it sticking to the table; or a very smooth, thin tablet of wax
is placed on stout cardboard under the entire piece of leather; when in
position, the edges of the leather should be turned over and firmly fixed
underneath the cardboard in such a manner as to prevent the wax forcing
itself out under the pressure of the tool. The wax must be prepared with
spirit to expel the grease or contact with it would stain the leather.</p>
<p>After thoroughly wetting the leather, the
outline<!--045.png--><span class="pagenum"><a name="Page_34" id="Page_34">34</a></span>
should be well
accentuated with the opener and the design brought out by lowering the
ground all round it with a fine modeller. The modelling is then done by
working the tool with varying pressure and is held in place by the wax.</p>
<div class="figcenter" style="width: 636px;"><a id="fig_15"></a>
<img src="images/i_045.png" width="636" height="53"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 15.—<span class="smcapac">TOOL FOR WORKING REED DECORATION</span></span>
</div>
<p>Beginners are advised to start by copying a plaster cast, in order to get
a full understanding of the values of relief.</p>
<p>The subject of wax supports brings us to that of padding the relief to
preserve its form, which may be done in many different materials. The
padding may be made of a special wax treated like cement, or of absorbent
cotton-wool soaked in a paste made of flour and water, or of cuttings of
glove skins shredded very
fine<a name="Anchor-6" id="Anchor-6"></a><a href="#Footnote-6"
class="fnanchor" title="Go to footnote 6.">[6]</a>
and mixed dry with talc, flour,
dextrine, etc., forming a liquid paste when water is added which can
easily be run into the hollows of the relief. This paste solidifies
rapidly, and is not affected by damp. Cardboard or cork scraped very fine
and mixed with paste or flour and water will also form a durable padding.
A special padding made with a round cotton cord dipped in flour mixed with
cold water is employed for flower stems and the so-called reed
decoration—a decoration consisting of a round line in relief of uniform
width, which lends itself to many combinations, and is worked with the
tool illustrated in Fig. 15. It may also be used in modelling the relief
by pasting it first on the back of the leather and, when dry, moulding the
leather with a modeller over the projection on the surface caused by its
thickness.</p>
<div class="footnote">
<p><a name="Footnote-6" id="Footnote-6"></a><a class="label" title="Return to text." href="#Anchor-6">[6]</a> <i>Dollage de gants.</i></p></div>
<h3>MODELLED LEATHER WITH PUNCHED BACKGROUND</h3>
<p>When the leather has been cut
before<!--046.png--><span class="pagenum"><a name="Page_35" id="Page_35">35</a></span>
being modelled, the punch completes
the work of the modeller in sinking the outer edge of the incision into
the background. To do this perfectly, the edge of the punch must be placed
very exactly against the outline of the raised design; the handle should
be held slanting slightly to the left in working; extra pressure will thus
fall towards the right on that part which, in spite of having been sunk by
the modeller, will always show a tendency to rise if the punch be used too
flat upon the surface.</p>
<p>A hammer, though useful in working certain punches which depend upon being
deeply impressed to produce a good effect, requires great sureness of hand
when used as described above, to prevent overstepping the limits of the
outline, and punches in wooden handles are much to be preferred for this
work. Too deep an impression is avoided by their use, and, by guiding the
end of the punch with the left hand, it can be placed more surely in the
right position and worked by the steady pressure of the wrist. (Fig. 16.)</p>
<p>The most useful punches are those producing a powdered or a very small
check pattern. With these there is no need for the impressions to be
arranged in any regular order; it is indeed better that they should
slightly overlap so that no part of the ground is left out. The effect of
some punches is dependent on their arrangement in combination; others can
be arranged independently to form a <i>semis</i>—a pattern made up by the
repetition of some given figure at intervals.</p>
<p>Wheels, either plain or having a more or less broad surface engraved with
any kind of pattern (such as a check diaper, pearling or arabesques), are
used for outlining or for continuous patterns, or for producing imitations
of shagreened leather.</p>
<p>An excellent effect can be obtained by varnishing the parts depressed by
the punch to make the colour adhere, and then painting them with <i>gouache</i>
or bronzes.
By<!--047.png--><span class="pagenum"><a name="Page_36" id="Page_36">36</a></span>
rubbing the leather afterwards with a woollen cloth, the
colour or bronze is easily removed from the unvarnished modelling.</p>
<div class="c3">PYROGRAVURE</div>
<div class="figcenter" style="width: 381px;"><a id="fig_16"></a>
<img src="images/i_047.png" width="381" height="452"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 16.—<span class="smcapac">USING A HAND PUNCH</span></span>
</div>
<p>The tools employed in pyrogravure are based on the same principle as the
instrument for thermo-cautery in surgery. The apparatus in most general
use consists of a platinum point mounted in a hollow metal handle
connected by a rubber tube with a pear-shaped
rubber<!--050.png--><span class="pagenum"><a name="Page_37" id="Page_37">37</a></span>
blower. This blower
serves to inject through a tube the carburetted air from a small benzine
reservoir attached to it. The incandescence of the point is maintained by
this constant injection, and the lines are burnt more or less deeply
according to the degree of incandescence, and the pressure applied. The
great difficulty is to keep the line of even thickness throughout. The
points are to be had of different shapes according to the effect desired.
Some are pierced at the end, so that the carburetted air escaping leaves a
mark on the leather similar to that which would be produced by a hot iron
grazing its surface. In this way a brown tint is obtained varying in
darkness in proportion to the proximity of the point to the leather.</p>
<div class="figcenter" style="width: 438px;"><a id="plate_6"></a>
<img src="images/i_048.jpg" width="438" height="640"
alt="" />
<span class="caption">6. <span class="smcap">Blind-stamped Morocco binding with gilt
roundels and coloured cameo design. <i>Celsus.</i> <i>De Medicina.</i> <i>Venice</i>,
1477. Italian, 15th Century.</span></span>
</div>
<p>There are also rather large blowers which are worked automatically by
compressed air, while others have a pedal action like a sewing machine.</p>
<p>It would be difficult to explain the many ways of handling the point so as
to obtain different effects; it should, however, always be held slightly
inclined to the right. It is shaped like an eagle’s beak, so that by using
the point alone, fine lines of more or less depth are obtained, and by
inclining it more to the right the rounded part will burn a larger surface
of the leather. Very deep hollows can be made with the point highly
heated. Pyrogravure is also an efficient way of depressing the ground work
of thick leather when the point is worked with repeated touches over the
surface. With a light hand and an accurate knowledge of the degree of heat
required to produce fine lines, a skilful artist is able to draw with the
point as if it were a pen.</p>
<p>The left hand plays a very important part in the process by controlling
the injection of carburetted air through the blower, and thereby
regulating the heat of the point. When the incandescence is automatically
produced, equal facility in varying the degree of heat according to the
requirements of the work is not possible.</p>
<!--051.png-->
<p><span class="pagenum"><a name="Page_38" id="Page_38">38</a></span></p>
<h3>POINTOGRAVURE</h3>
<p>The following description is borrowed from Mons. E. Aumaître, the inventor
of another process for the decoration of leather to which he has given the
name of pointogravure.</p>
<p>The implements required are two graving-points, one large and one small, a
modeller and a spirit-lamp.</p>
<p>The design having been traced on the leather, the whole of it is wetted
with a sponge as described on page <a href="#Page_19">19</a>. The point is then heated in the
spirit-lamp and passed lightly over the line. It should be held like a
pencil and heated sufficiently to produce a light brown mark on the
leather, and it should run smoothly without sticking. The fine lines are
drawn lightly and the point pressed more heavily for the deeper ones. Deep
hollows can be made by sloping the tool, and using its widest side. The
point being very small, it requires frequent heating to keep it in a
condition to produce satisfactory results. It is not hot enough unless it
runs smoothly on the leather and darkens the impression. On the other
hand, overheating is to be avoided to prevent burning the surface of the
leather. This process skilfully carried out will produce shading,
hatching, and lines of great delicacy, also much softer effects than
pyrogravure. It lends itself equally well to the broad treatment of a
design.</p>
<h3>STAMPED LEATHER</h3>
<p>It is beyond the scope of this work to describe the process of stamping
leather with a steel die and a
balance-press;<a name="Anchor-7" id="Anchor-7"></a><a href="#Footnote-7"
class="fnanchor" title="Go to footnote 7.">[7]</a>
we will therefore explain
a method in which the steel die is replaced by thick cardboard or leather
cut out in open-work, and the balance-press by a small one worked by hand.
The cardboard or leather stencil, laid on damp leather and placed in the
press, will sink in,
causing<!--052.png--><span class="pagenum"><a name="Page_39" id="Page_39">39</a></span>
those parts of the leather which are against
the open parts of the stencil to stand out in relief.</p>
<div class="footnote">
<p><a name="Footnote-7" id="Footnote-7"></a><a class="label" title="Return to text." href="#Anchor-7">[7]</a> <i>Balancier.</i></p></div>
<p>There is another method which has been found particularly satisfactory in
working a deep design on the board of a book-binding. The design is drawn
sharply in outline with a pen upon very white paper. By a photographic
process a metal block is produced from the drawing, on which the outline
appears in relief. This block, mounted on pasteboard or wood, will form a
die with which the design can be hollowed out of the leather by pressure
in a copying-press, and the result subsequently perfected by cutting or
modelling.</p>
<p>Another interesting process consists in etching a design deeply upon a
copper-plate; the lines are then filled in with printing ink, the surplus
removed with the palm of the hand, and the plate wiped over with a soft
rag, preferably of flannel. A piece of leather is then wetted and placed
under the plate and the whole heavily pressed. Since a copying-press is
not sufficiently heavy to produce the relief, a bookbinder’s press should
be used and tightly screwed up. When the leather has taken the impression
sufficiently, the whole is removed from the press, and the copper-plate
carefully raised, avoiding tearing the leather if it should have stuck to
the plate. The design will then stand out in relief, coloured black or red
according to the ink used. The ink must be thick enough not to spread over
the leather under pressure.</p>
<p>There is also a method of stamping leather by means of two plaster casts
prepared with stearine, both bearing the same design, one in relief and
the other hollowed. A thoroughly wetted piece of thin leather is placed
between these two casts and well pressed, the amalgam enabling the plaster
to bear the pressure. The leather should be allowed to dry between the
casts, or, if preferred, the hollow one may be removed.</p>
<p>The same principle can be applied without the
hollow<!--053.png--><span class="pagenum"><a name="Page_40" id="Page_40">40</a></span>
cast, by modelling
the leather with the modelling tool, so that it takes the form of the cast
in relief beneath it. In some cases the plaster is left permanently under
the leather to form the padding.</p>
<div class="figcenter" style="width: 482px;"><a id="fig_17"></a>
<img src="images/i_053.png" width="482" height="61"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 17.—<span class="smcapac">CUTTING-OUT KNIFE</span></span>
</div>
<h3>OPEN-WORK LEATHER</h3>
<p>The leather should be neatly and sharply cut out for open-work decoration,
and placed over a groundwork of leather, stuff or metal: the last material
is well adapted by its contrast of colour to show up the ornament laid
over it. Open-work leather is a good material for hangings, and when
destined for this purpose the design is sewn on the groundwork of leather
or stuff with a sewing-machine, or stuck with gutta-percha. In the latter
case the back of the leather is made quite smooth, and a layer of
gutta-percha is placed on it and made to stick by means of steam produced
by heating a wet pad. Well pressed down with this pad the gutta-percha
will stick to the leather, and also cause it to keep in place on the
groundwork, to which it is made to adhere permanently by passing a hot
iron over the surface. A sheet of white blotting-paper is laid over the
leather to protect it. When the leather is worked in relief, this
proceeding must be reversed, that is to say, the leather is placed face
downwards on a sheet of wadding with the material forming the groundwork
uppermost, and the hot iron is passed over the back of the material. The
relief can easily be worked on the leather before it is cut out.</p>
<p>The cutting out is done on a piece of strong cardboard with the knife
illustrated in Fig. 17.</p>
<div class="figcenter" style="width: 386px;"><a id="plate_7"></a>
<img src="images/i_054.png" width="386" height="685"
alt="" />
<span class="caption">7. <span class="smcap">Case of cut and punched leather. German, 15th
Century.</span></span>
</div>
<p>The borders of open-work leather can be
ornamented<!--056.png--><span class="pagenum"><a name="Page_41" id="Page_41">41</a></span>
by a sort of plaiting
formed by lacing thin strips of soft leather through holes made with a
punch.</p>
<p>A very effective decoration for furniture can be made with open-work
leather over a panel of wood, or a metal background.</p>
<hr class="chap" />
<!--057.png-->
<p><span class="pagenum"><a name="Page_42" id="Page_42">42</a></span></p>
<h2>CHAPTER III</h2>
<div class="c3">LEATHER MOSAIC</div>
<p>Until recently it seemed as if this pleasing art would have to remain the
monopoly of a limited number of professional craftsmen working with
numerous tools, and reckoning a ten years’ apprenticeship necessary to the
attainment of proficiency in their craft. But although there is small
likelihood of amateurs entering the domain of the followers and emulators
of artists such as John Reynes, Florimond Badier, Monnier, Padeloup and
Jubert, Mons. Eugène Aumaître has invented a simpler process of leather
mosaic, for which fewer tools are required and which is within the reach
of artist and amateur alike. The following pages contain the result of the
study of his method, with the addition of some observations based on the
practical experience of the author.</p>
<h3>LEATHER FOR GROUNDWORK</h3>
<p>Any skin may be used for the groundwork of leather mosaic, but morocco,
and especially the kind called Cape morocco, is generally preferred,
because of the grained surface which shows up the inlaid decoration to the
best advantage.</p>
<p>Other skins, however, with either dull or glossy surfaces make good
backgrounds for mosaic decoration, and as they are generally fawn
coloured, they may first be stained to produce shaded groundwork very
attractive in effect.</p>
<!--058.png-->
<p><span class="pagenum"><a name="Page_43" id="Page_43">43</a></span></p>
<p>The old masters of leather mosaic made great use of fawn-coloured calf,
occasionally adding a touch of coloured lacquer to bring out the light
parts of the design.</p>
<h3>PREPARATION OF THE LEATHER FOR THE GROUNDWORK</h3>
<p>The first necessity in working leather mosaic is to have a flat and rigid
surface to work upon; it is indispensable therefore, when the leather is
not in itself sufficiently thick and firm, to stretch it on cardboard.
This rather troublesome preparatory process is best confided to an expert;
we will, however, describe it for the benefit of those preferring to
execute it themselves. A strong, smooth piece of cardboard called
millboard is taken, and the edges rubbed down with glass paper. A thin
coat of paste is applied on one side of the board and allowed to dry.</p>
<div class="figcenter" style="width: 193px;"><a id="fig_18"></a>
<img src="images/i_058.png" width="193" height="197"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 18.—<span class="smcapac">PARING KNIFE</span></span>
</div>
<div class="figcenter" style="width: 272px;"><a id="fig_19"></a>
<img src="images/i_058_2.png" width="272" height="55"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 19.—<span class="smcapac">PARING KNIFE</span></span>
</div>
<p>The edges of the leather must now be thinned so that they will more
readily stick when turned over and pasted under the board, and also to
avoid the unevenness which the normal thickness of the leather would
produce underneath. A paring-knife with a broad, flat, very sharp blade
(Figs. 18 and 19) is used for this purpose; its manipulation is difficult
and requires long practice. The handle is held against the palm of the
hand, and the fingers extending over the blade cause it to penetrate the
leather superficially by a more or less strong pressure, the object being
to take off shavings from the back of the skin, increasing towards the
edge until the edge itself is reduced to the thickness of a cigarette
paper.</p>
<!--059.png-->
<p><span class="pagenum"><a name="Page_44" id="Page_44">44</a></span></p>
<div class="figcenter" style="width: 367px;"><a id="fig_20"></a>
<img src="images/i_059.png" width="367" height="279"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 20.—<span class="smcapac">PARING LEATHER</span></span>
</div>
<p>The leather is placed surface downwards on a lithographic stone or a slab
of marble. It is held stretched with the left hand, the fingers being
extended over it on the face of the stone, and the thumb pressed against
the side leaving the part just in front of the fingers free to be pared
(Fig. 20). It is of the first importance for the success of this operation
that the leather should be kept well stretched. The knife is held almost
horizontally to avoid cutting into the leather at too sharp an angle, and
is worked from left to right towards the edge.</p>
<p>The leather is then fastened to the cardboard by pasting either the whole
of it or only the edges, which are turned underneath. In any case ordinary
paste should be used; seccotine or glue would sink into and harden the
leather, making the subsequent outlining process difficult.</p>
<p>When the piece of leather is so large that it would cause the board to
warp when it dries, some paper should be pasted on the other side of the
board, which will keep it flat by drawing it in the opposite direction.</p>
<div class="figcenter" style="width: 438px;"><a id="plate_8"></a>
<img src="images/i_060.jpg" width="438" height="612"
alt="" />
<span class="caption">8. <span class="smcap">Brown leather binding, cut and engraved, with
punched background. <i>German MS. Chronicle of Events.</i> German, 15th
Century.</span></span>
</div>
<!--062.png-->
<p><span class="pagenum"><a name="Page_45" id="Page_45">45</a></span></p>
<p>The work is then put into the press or under heavy boards. It is important
that this should always be done after paste has been used. When it is too
large to put into a copying-press, it should be laid upon a flat table and
a sheet of nickelled or very smooth zinc placed against the part to be
decorated. The cardboard known as <i>Carton Jacquart</i> may be substituted for
the zinc, but there is a risk that the moisture of the paste penetrating
the leather may cause it to swell, notwithstanding its glaze. The zinc
plate or the board should not be smaller than the leather, for in that
case the pressure would produce a ridge round its edge.</p>
<p>The groundwork is ready to receive the ornament as soon as it is dry. The
different methods of working mosaic will now be explained in turn.</p>
<h3>MONOCHROME MOSAIC ON CALF</h3>
<p>In this style of decoration the leather used for the inlaid design is
white or very light in tone, and may be dyed subsequently to present the
appearance of a mosaic made of variously coloured leathers.</p>
<h3>LEATHER FOR INLAYING</h3>
<p>The skins sold for this purpose are split sheepskins. Their extreme
thinness renders them liable to stretch a great deal, and therefore they
are most difficult to cut out in any desired shape. To obviate this
difficulty, the back of the leather is pasted over, and it is then
stretched on a board and fastened with drawing-pins to prevent it from
shrinking as it dries. But there is another and a better method—that of
mounting the leather on paper.</p>
<h3>MOUNTING THE LEATHER ON PAPER</h3>
<p>Some paste is made of very light and smooth flour, diluted with half the
quantity of water and beaten to a cream. The water is added in small
quantities while the mixture is being stirred. Canson paper, or some other
strong<!--063.png--><span class="pagenum"><a name="Page_46" id="Page_46">46</a></span>
drawing paper, is pasted over the whole surface of the leather, so
that it adheres lightly, and can be removed afterwards without difficulty;
it is then placed under boards and allowed to dry thoroughly.</p>
<h3>TRACING THE DESIGN ON THE PAPER</h3>
<p>The design is traced by means of carbon paper on the paper lining of the
inlay leather. A hard pencil should be used in order to produce very sharp
lines.</p>
<h3>CUTTING OUT THE DESIGN</h3>
<p>Cutting-out knives should possess a keen edge and a small blade, and
should be so shaped that they can be turned freely in any direction. The
knife illustrated in Fig. 21 combines all these qualities. It consists of
a very fine double-edged blade, set loosely into a slit in a hard wood
handle and secured with a few turns of thread; a piece of leather over the
whole (A) keeps the blade in its place. The handle being loose, it is
possible to give any minute movement to the blade, which can also be taken
out for sharpening when necessary. It must be kept as sharp as a razor.
The extreme fineness of this blade facilitates cutting out the delicate
parts of a design, but if handled too vigorously it is apt to get out of
shape. The second tool (Fig. 22) is a stencil-cutter’s knife, and is very
similar to the one described above except in size. It is usually sold
mounted in an ebony slide bound round with copper wire, but can with
advantage be mounted as in Fig. 21, in a split hard-wood handle.</p>
<p>One little known tool deserves mention for its flexibility and lightness.
This is a small scraper shaped like an unslit pen, the blade widening from
the point in two very fine edges like the head of a pike. It is used by
photographers and miniature painters, and is sold by the dozen in small
boxes. When in use it is firmly fixed in a small pen-holder so that it
does not turn when pressed upon (Fig. 23).</p>
<div class="figcenter" style="width: 394px;"><a id="fig_a"></a><a id="fig_21"></a><a id="fig_22"></a><a id="fig_23"></a>
<img src="images/i_064.png" width="394" height="625"
alt="" />
<span class="caption"><span class="smcapac">CUTTING-OUT KNIVES</span>: (A), <span class="smcapac">FIG.</span> 21, <span class="smcapac">FIG.</span> 22, <span class="smcapac">FIG.</span>
23</span>
</div>
<!--065.png-->
<p><span class="pagenum"><a name="Page_48" id="Page_48">48</a></span></p>
<p>The special knife illustrated in Fig. 17 is sometimes recommended, but it
is better adapted to cutting out thick skins for open-work decoration, as
the point of the blade is not sufficiently fine for use on thin leather.</p>
<div class="figcenter" style="width: 370px;"><a id="fig_24"></a>
<img src="images/i_065.png" width="370" height="349"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 24.—<span class="smcapac">CUTTING OUT INLAY</span></span>
</div>
<p>The leather to be cut out is placed on a sheet of the cardboard used in
mounting drawings, which is firm, but at the same time easily penetrated
by the point of the tool. The nature of the board on which the leather is
laid is important, for to ensure a clean cut, the tool, as it pierces the
leather, must not encounter a veined surface such as that of wood, which
might deflect the point. The three middle fingers of the left hand hold
the leather mounted on the paper upon the board, the thumb and little
finger supporting the whole underneath (Fig. 24). The
part<!--068.png--><span class="pagenum"><a name="Page_49" id="Page_49">49</a></span>
which is to be
cut is turned towards the knife by the left hand, the right hand being
held in a fixed position with the knife, slightly inclined to the right,
cutting the leather as it is presented by the other hand. The lines must
be cleanly cut in order that the subsequent operation of outlining may be
successfully accomplished. With every care in cutting out, it may
sometimes be found in detaching the cut portion that a small thread of the
leather remains unsevered. In this case it should be neatly cut through,
and on no account may it be pulled to make it give way, which would result
in spoiling the design by either tearing or stretching the leather. When
cutting out a design on a large scale it is not possible to hold the work
in the manner just described; a part of the design to be cut out is
therefore placed flat on a large sheet of cardboard on a smooth table and
can then be turned about as required under the point of the knife.</p>
<div class="figcenter" style="width: 477px;"><a id="plate_9"></a>
<img src="images/i_066.png" width="477" height="443"
alt="" />
<span class="caption">9. <span class="smcap">Cover of Case for a cup in wood covered with
leather, <i>cuir bouilli</i>, embossed, painted and gilt. Italian, about 1500.</span></span>
</div>
<p>When the inlay is of white or very light leather, it is extremely
difficult to conceal any joins occurring in the middle of lines; care must
therefore be taken that there are as few joins as possible, and that they
are arranged at points where they will easily disappear in lines of the
design going in an opposite direction.</p>
<p>The centre of the design should be cut out first, and then the outer
lines, reserving the more delicate parts, such as flower stems, for the
last.</p>
<h3>PASTING THE INLAY ON THE GROUNDWORK</h3>
<p>When the inlay is of a nature that does not require placing in any very
exact position, as for instance a spray of flowers, it will be sufficient
to lay it on the groundwork and mark the principal points. When it is to
occupy a definite position, forming the framework of a design, for
instance, it is laid upon the groundwork exactly in the right place and
then given a sharp turn in a
copying-press,<!--069.png--><span class="pagenum"><a name="Page_50" id="Page_50">50</a></span>
great care being taken that
it does not get displaced during the operation. Owing to the thickness of
the supporting paper, this will be sufficient to mark the outline of the
design on the groundwork. Some very smooth starch paste is then applied
with a flat brush on the exposed side of the cut out leather, care being
taken that every part, however small, is thoroughly pasted. To facilitate
this and to prevent the leather curling up when pasted, it should first be
fixed to a board with drawing-pins.</p>
<p>The portion of the ground which is to receive the inlay is damped with a
soft sponge; the inlay is then placed in position and pressed down with
the palm of the hand, a modeller being used for the finer parts. If it
should become displaced, the greatest care must be used in correcting it.
With the small pincers used by artificial flower-makers, the minutest
pieces of leather can be taken up and replaced after being repasted, if
necessary.</p>
<h3>SETTING IN THE INLAY</h3>
<p>The next process is that of setting the inlay into the groundwork, so that
no relief remains. This is done with the help of a roller with a long
wooden handle held in both hands and pressed against the shoulder, as
illustrated in Fig. 25. The paper on which the inlay is pasted plays an
important part in this operation; the greater its thickness, the greater
will be the pressure attainable, and the deeper the penetration of the
inlay into the damp background.</p>
<p>At first the roller is worked lightly with one hand only to ensure the
uniform adherence of the inlay, the movements being short, and repeated
several times over the same spot. When afterwards pressing heavily over
the whole surface, a piece of thin, tough paper between the roller and the
work will prevent the inlay from curling up, and the paper may be lifted
from time to time to see that nothing is out of place.</p>
<!--070.png-->
<p><span class="pagenum"><a name="Page_51" id="Page_51">51</a></span></p>
<div class="figcenter" style="width: 381px;"><a id="fig_25"></a>
<img src="images/i_070.png" width="381" height="448"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 25.—<span class="smcapac">USING ROLLER TO SECURE ADHESION OF
INLAY</span></span>
</div>
<p>When the work is not too large, it is easier and more effectual to use a
copying-press instead of a roller for this operation, which is then
carried out in the following manner: A piece of felt is laid in the press,
and over it a sheet of very smooth or nickelled zinc, or, failing this, of
<i>Carton Jacquart</i>. The work is then laid on it and covered with a second
sheet of nickelled zinc and some pasteboards. The press is screwed up as
tightly as possible.</p>
<p>The work must not remain in the press, as if
allowed<!--071.png--><span class="pagenum"><a name="Page_52" id="Page_52">52</a></span>
to dry completely,
the subsequent removal of the paper pasted to the inlay would become
extremely difficult. To effect this removal, the paper is dabbed with a
damp sponge until it is ready to come off. A point of the pincers is
inserted underneath the paper which, if sufficiently soaked, should easily
come away when the tool is slid gently along. The paper, as it becomes
freed, should frequently be cut off with scissors to facilitate the
handling of the tool. The leather, being damp, may possibly become unstuck
and stretched during this process. It must then immediately be repasted
and replaced, and the stretched part reduced to its original size by
gently pushing it together with the modeller. Should it be found
impossible to reduce it thus, the part that is out of shape must be cut
off and joined on again. When the paper has been removed, the whole
surface is carefully washed over, wetting it as little as possible, so as
not to cause the mosaic to become unstuck. The work is then placed in the
press, or under boards, until it is perfectly dry.</p>
<h3>OUTLINING THE MOSAIC</h3>
<p>Outlining is the most delicate process in leather mosaic. When well
carried out it should be impossible to distinguish the line where the
inlay joins the groundwork. The extreme edge of the inlaid leather is
pressed into the groundwork by means of a tool invented by Mons. Aumaître,
producing a fine line the breadth of the edge of the tool selected. This
tool, called an outliner (Fig. 27), has two blunt ends, one rounded and
the other square, and is flat on one side and rounded on the other. The
rounded side of the tool affords extra pressure, and should therefore be
placed on the inner side of the line so that it serves to increase the
depression of the edge of the inlay. It is best to work the outline with
the cold tool first, and then to go over it again with the tool heated.
The
inlay<!--072.png--><span class="pagenum"><a name="Page_53" id="Page_53">53</a></span>
is lightly damped round the edges, and the round end of the
tool is placed half on the inlay and half on the groundwork. The tool is
held first inclined backwards (as in Fig. 26) and then brought with
pressure to a perpendicular position (Fig. 27). This will make a groove
into which the edge of the inlay will disappear. The square end of the
tool is used for straight lines. Great care must be taken in placing the
tool correctly; no portion of the inlay may protrude beyond the flat side
of the tool, as any particle of the edge, however minute, which is not
sunk in the groove would have to be cut off. If the edge of the inlay does
not extend up to the tool, the error is still more troublesome to correct,
more particularly when the leather is of a delicate colour, on account of
the difficulty of matching the exact shade for joining it.</p>
<div class="figcenter" style="width: 337px;"><a id="fig_26"></a>
<img src="images/i_072.png" width="337" height="285"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 26.—<span class="smcapac">FIRST POSITION OF OUTLINING TOOL</span></span>
</div>
<div class="figcenter" style="width: 375px;"><a id="fig_27"></a>
<img src="images/i_073.png" width="375" height="509"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 27.—<span class="smcapac">SECOND POSITION OF OUTLINING TOOL</span></span>
</div>
<p>After this operation the edge of the outlining tool (Fig. 28) is inserted
in the groove thus formed, and worked with a short up and down movement. A
ruler will serve as a guide in working straight lines. The round side of
the tool
is<!--073.png--><span class="pagenum"><a name="Page_54" id="Page_54">54</a></span>
held slightly inclined towards the edge of the inlay. The
wheel illustrated in Fig. 29 may also be used, but requires great sureness
of hand for its successful manipulation. Gouge-shaped outlining tools with
curves of different degrees (Fig. 30) are useful for little curved lines
which are otherwise difficult to work; also the tool represented in Fig.
31, for the lettering on bookbindings, etc., where
the<!--075.png--><span class="pagenum"><a name="Page_56" id="Page_56">56</a></span>
lines require to
be sharply finished. It must, however, rest with the artist to select the
tools he considers most suitable for his work.</p>
<div class="figcenter" style="width: 409px;"><a id="fig_28"></a><a id="fig_29"></a><a id="fig_30"></a><a id="fig_31"></a>
<img src="images/i_074.png" width="409" height="636"
alt="" />
<span class="caption">
<span class="smcapac">FIG.</span> 28.—<span class="smcapac">GOUGE OUTLINER.</span><br />
<span class="smcapac">FIG.</span> 29.—<span class="smcapac">OUTLINING WHEEL.</span><br />
<span class="smcapac">FIG.</span> 30.—<span class="smcapac">GOUGE OUTLINER.</span><br />
<span class="smcapac">FIG.</span> 31.—<span class="smcapac">STRAIGHT OUTLINER.</span>
</span>
</div>
<p>When the outline has been worked with the cold tool, a hot one is used to
go over it again to ensure perfect adhesion, and to give an attractive
brown tint to the lines. The end of the outliner is heated over a
spirit-lamp to a degree at which it can still be comfortably held in the
hand, and used as before. If the tool does not run smoothly, owing to the
elasticity of the edge of the inlaid leather, the latter may be lightly
damped with a brush. It will at first be found difficult to keep the tool
at the right heat. As a groundwork, calf with a smooth surface is more
sensitive to damage from an over-heated tool than split sheepskin. It is
useful to paste some of the inlay leather upon a spare piece of the
leather of the groundwork, with which to test the heat of the tool. If the
tool be too hot, it will burn and penetrate the leather without pressure.
It can be cooled to the desired temperature on a wet sponge.</p>
<p>The next process in leather mosaic is that of colouring, which is dealt
with in Chapter IV. It then only remains to give the finishing touch to
the work by passing a polishing iron (Fig. 32) over the surface, to polish
it and make it perfectly even. The tool is heated by holding the part
which does not come in contact with the leather over the flame of a
spirit-lamp. The polished side should frequently be well rubbed on
flannel, and should any portion of its surface become dull, the polish can
be restored with fine emery paper. The polishing iron, when heated, is
held in the right hand and worked with little stroking movements, bringing
first the end and then, by lowering the handle, the back of its polished
surface in contact with the leather. The various positions of the tool
during this operation closely resemble those of a vessel when it is
pitching.</p>
<!--076.png-->
<div class="figcenter" style="width: 600px;"><a id="plate_10"></a>
<img src="images/i_076.png" width="600" height="467"
alt="" />
<span class="caption">10. <span class="smcap">Cover of work-box of wood covered with
embossed leather, <i>cuir bouilli</i>. German, 16th Century.</span></span>
</div>
<!--078.png-->
<div class="figcenter" style="width: 315px;"><a id="plate_11"></a>
<img src="images/i_078.png" width="315" height="605"
alt="" />
<span class="caption">11. <span class="smcap">Powder-flask of wood covered with leather,
<i>cuir bouilli</i>, cut and embossed. Italian, 16th Century.</span></span>
</div>
<!--080.png-->
<p><span class="pagenum"><a name="Page_57" id="Page_57">57</a></span></p>
<h3>POLYCHROME MOSAIC</h3>
<div class="figcenter" style="width: 365px;"><a id="fig_32"></a>
<img src="images/i_080.png" width="365" height="480"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 32.—<span class="smcapac">POLISHING MOSAIC</span></span>
</div>
<p>This style of decoration consists of different coloured leathers arranged
upon a ground, and is the only one that can properly be called leather
mosaic. The work of marking it out is a lengthy one and demands scrupulous
exactitude. A finished design is first painted in water-colours and marked
with letters which are repeated
on<!--081.png--><span class="pagenum"><a name="Page_58" id="Page_58">58</a></span>
the pieces of coloured leather, so
that the exact place is indicated which they are to occupy in the design.
It is important in this style of mosaic to obtain a very correct tracing
of the design on the groundwork. On a smooth and light ground the
tracing-point lightly worked will be sufficient; when the ground is dark
or has a grained surface, red or white transfer paper should be used. The
most satisfactory method of marking the design is by impressing a stencil
of thick paper, but it cannot be employed with morocco leather for fear of
crushing the grain too much. A thick stencil, however, carefully used
without exerting great pressure, may give a sufficient result without
spoiling the grain.</p>
<p>For polychrome mosaic on a smooth ground with an inlay of split sheepskin
pasted on Canson paper, the method already described for working mosaic of
one colour is the best, but at the same time the directions which are
given below for placing the differently coloured skins side by side in
position should be followed.</p>
<h3>POLYCHROME MOSAIC ON A MOROCCO GROUNDWORK</h3>
<p>Morocco leather for inlaying is thinned with the paring-knife, but it
cannot be reduced to the excessive thinness of split sheepskin. It
possesses, however, the advantage that the extreme edges may be made
thinner in proportion for laying one over the other at the point where
they meet.</p>
<p>After it is pared, the back of the leather is pasted over and it is pinned
out on a board to dry. The different parts of the design to be inlaid are
then traced on the various coloured leathers, and cut out in the manner
already explained. The difficulty of placing the pieces exactly edge to
edge is so great that it is better to allow them to overlap very slightly,
but in order that this should not produce undue thickness at the point
where they join, the substance of the extreme edges must be
further<!--082.png--><span class="pagenum"><a name="Page_59" id="Page_59">59</a></span>
reduced with the paring-knife. A small margin is left for this purpose in
cutting out. Paring the edges to their thinnest possible substance will
give a slightly jagged outline, and the extra piece will thus more easily
merge into the join than if sharply cut. Outlining with the hot tool will
perfect the join.</p>
<h3>PASTING THE INLAY ON A MOROCCO GROUNDWORK</h3>
<p>To avoid crushing the grain of rough morocco, the tool illustrated in Fig.
33 is used instead of the roller to secure the adhesion of the inlay to
the groundwork, in order that the pressure may be applied only upon the
inlay. Damping the groundwork, except where the ornament is placed, should
be avoided. The tool is held pressed down with both hands as in Fig. 34,
and rubbed backwards and forwards. The work is then placed under boards.</p>
<h3>MOSAIC ON MODELLED LEATHER</h3>
<p>The remarks on paring leather for polychrome mosaic apply also to paring
the leather for covering a design in relief. An extra margin is left round
the edges, which are “slashed” with the tool, so that they may better
embrace the form of the modelling, the finer details of which are not
worked until afterwards. The leather is first placed dry in position over
the modelling, and smoothed over with a modeller, so that it takes the
form of the relief. It will then be seen how much should be cut from the
edges, so that it may exactly fit into the outline when it is pasted on.</p>
<h3>INSERTED MOSAIC</h3>
<p>This method of mosaic invented by Mons. Aumaître possesses the advantage
of being very durable, owing to the edges of the inlay being secured
between the two edges of the incision made in the groundwork. The outline
is<!--083.png--><span class="pagenum"><a name="Page_60" id="Page_60">60</a></span>
deeply cut in the groundwork, the incision well opened with the opener
and then filled with paste. The inlay is also pasted and the edges
inserted in the incision. A wheel or a large modeller is used to press
down the edges, and the outline is then gone over with a hot tool.</p>
<div class="figcenter" style="width: 367px;"><a id="fig_33"></a><a id="fig_34"></a>
<img src="images/i_083.png" width="367" height="496"
alt="" />
<span class="caption"><span class="smcapac">FIG.</span> 33, <span class="smcapac">FIG.</span> 34.—<span class="smcapac">STICKING INLAY ON MOROCCO
GROUND WITH TOOL (FIG. 33) INSTEAD OF ROLLER, TO AVOID CRUSHING THE GRAIN</span></span>
</div>
<!--084.png-->
<div class="figcenter" style="width: 512px;"><a id="plate_12"></a>
<img src="images/i_084.png" width="512" height="535"
alt="" />
<span class="caption">12. <span class="smcap">Shield of cut and embossed leather, <i>cuir
bouilli</i>. Italian, 16th Century.</span></span>
</div>
<!--086.png-->
<p><span class="pagenum"><a name="Page_61" id="Page_61">61</a></span></p>
<h3>MOSAIC IN RELIEF</h3>
<p>The term mosaic is perhaps not very correctly applied to this style of
decoration, in which the shape of the design is indented, by pressure, on
the damp surface of the groundwork, and filled in with an inlay of
leathers thick enough to stand out in relief, and be subsequently carved.
A thin kind of
cowhide<a name="Anchor-8" id="Anchor-8"></a><a href="#Footnote-8"
class="fnanchor" title="Go to footnote 8.">[8]</a>
specially prepared for embossed work is used.
The design is traced upon it in the manner described for carved leather,
and a preliminary modelling is executed indicating the outlines and
veinings as strongly as possible. The high reliefs may be embossed and
lightly stuffed. This done, it is placed upon Bristol board, not less than
half the thickness of the leather itself, with a piece of red transfer
paper face downwards in between. The whole is firmly fixed upon a drawing
board so that nothing can get displaced, and the design is cut out with a
stencil-cutter’s knife (Fig. 22). If possible, both leather and Bristol
board should be cut through at the same time, but should the knife not
penetrate the latter sufficiently to cut it through, the outline will have
been marked on it by the transfer paper and it may be cut out separately.
The leather and the board must, however, be absolutely identical in shape
and very sharply cut. With the die thus formed by the Bristol board, the
morocco groundwork is depressed to receive the inlay. It is thoroughly
wetted and the water allowed to sink in. The board is then placed in the
exact position which the leather inlay is to occupy, and covered with a
very thick sheet of blotting-paper to protect the grain of the groundwork
from being crushed too much. The whole is well pressed in the
copying-press until the die has sufficiently entered into the leather. The
leather inlay should then be tried in the hollow thus produced, and
trimmed where necessary if it be too large. After pasting it thoroughly,
taking<!--087.png--><span class="pagenum"><a name="Page_62" id="Page_62">62</a></span>
care not to omit any small points, it is placed in position on the
groundwork and worked into the hollow with a modeller. The work is then
placed under boards to dry; a press would flatten the relief too much.</p>
<div class="footnote">
<p><a name="Footnote-8" id="Footnote-8"></a><a class="label" title="Return to text." href="#Anchor-8">[8]</a> Kip-skins.</p></div>
<p>When the paste is quite dry and the leather well stuck, the carving may be
proceeded with as described in Chapter II.</p>
<p>Very characteristic effects are obtained by colouring leather worked in
this manner.</p>
<h3>INCRUSTED MOSAIC</h3>
<p>The following description of a style of decoration, called by Mons.
Belleville “incrusted
mosaic,”<a name="Anchor-9" id="Anchor-9"></a><a href="#Footnote-9"
class="fnanchor" title="Go to footnote 9.">[9]</a>
is derived from the valuable work of
that author, entitled <i>Le Cuir dans la Décoration Moderne</i>.</p>
<div class="footnote">
<p><a name="Footnote-9" id="Footnote-9"></a><a class="label" title="Return to text." href="#Anchor-9">[9]</a> <i>Mosaïque par Incrustation.</i></p></div>
<p>In incrusted mosaic the design is not cut out and applied on the
background, but the different pieces of coloured leather forming the
design and the leather of the background are placed side by side on the
same plane. When the ornament is simple and the background plain, the
design is traced on the groundwork, carefully cut out, and used as a
pattern for cutting out the piece destined to replace it; when the
ornament is to embrace the whole surface, the following method is
recommended: The design, drawn on paper and coloured, is fixed on a
drawing-board and over it is placed a sheet of transparent paper, or some
thin muslin carefully sized and stretched. An exact tracing of the design
is made on rather stiff paper, which is coloured or numbered to correspond
with the pieces of the different leathers which are to compose the mosaic.
The tracing is then cut out, separated, and the pieces pasted on the
corresponding leather, either with the face on the flesh side of the
leather, or the back on its surface. In the latter case it is very lightly
done, but if pasted on
the<!--088.png--><span class="pagenum"><a name="Page_63" id="Page_63">63</a></span>
flesh side it should be done securely, as it
will remain permanently. When all these pieces are cut out of the leather
they are pasted in their respective places on the design, and the whole
put in the press for about ten hours. If the work has been well executed,
the lines where the pieces of leather come together will be hardly
visible; the next step is to accentuate them and make them regular. This
may be done either with a heated wheel giving a smooth even line, which
may, if desired, be subsequently gilded, or by pyrogravure. Vigour and
character can be imparted to the outline by the use of the latter process,
and the darkened colour of the burnt line is made more brilliant by
polishing it with an agate burnisher. In either case the tool must be
worked accurately with its edge half on each side of the line. The main
advantage of the process of incrusted mosaic is that the grain of the
leather employed is better displayed than in inlaid mosaic. It is only
suitable for work on a large scale.</p>
<hr class="chap" />
<!--089.png-->
<p><span class="pagenum"><a name="Page_64" id="Page_64">64</a></span></p>
<h2>CHAPTER IV</h2>
<div class="c3">DYES,
PATINES<a name="Anchor-10" id="Anchor-10"></a><a href="#Footnote-10"
class="fnanchor" title="Go to footnote 10.">[10]</a>
AND GILDING</div>
<div class="footnote">
<p><a name="Footnote-10" id="Footnote-10"></a><a class="label" title="Return to text." href="#Anchor-10">[10]</a> <i>Patine</i> represents a veneer, or wash of colour, applied on
the surface, or in the hollows of leather, to intensify its tone, or to
give artificial effects, such as those of verdigris, rust, or antiquity.</p></div>
<p>Partly owing to its nature, and partly owing to the tanning process,
leather is susceptible to the action of the dyes used to colour it in
degrees varying according to their composition and penetration. We will
not attempt to enumerate all the dyes that may be employed or to describe
their composition. Excellent results can be obtained with ready made
preparations, and some brief remarks on the subject are all that is
necessary for the purpose of this work.</p>
<p>Practical experience alone is a reliable guide in the selection of dyes,
as, whatever their base may be, they all vary greatly in use. It may be
remarked that there are many aniline dyes which are more durable than
vegetable ones, although there are others which merit their reputation for
instability. The colour of dyed leather cannot be expected to remain
unaffected by constant exposure to direct sunlight, but it should not
alter with ordinary
use.<a name="Anchor-11" id="Anchor-11"></a><a href="#Footnote-11"
class="fnanchor" title="Go to footnote 11.">[11]</a></p>
<div class="footnote">
<p><a name="Footnote-11" id="Footnote-11"></a><a class="label" title="Return to text." href="#Anchor-11">[11]</a> See the remarks on Leather for Bookbinding in the Note at
the end of this volume.</p></div>
<p>It is obvious that, in proportion as the colours sink into the leather,
they will lose in brilliancy, but on the other hand, this very absorption,
which allows colours to
be<!--092.png--><span class="pagenum"><a name="Page_65" id="Page_65">65</a></span>
superposed and appear translucent, gives a
depth rarely obtainable in materials of less capillarity.</p>
<div class="figcenter" style="width: 700px;"><a id="plate_13"></a>
<img src="images/i_090.png" width="700" height="362"
alt="" />
<span class="caption">13. <span class="smcap">Top of Casket covered with brown calf, cut and
slightly embossed. By Florence Hornblower. Modern English.</span></span>
</div>
<p>The following notes are intended merely as a general indication of the
manner of treating the various substances used in colouring leather.</p>
<p>The substance sold by druggists under the name of potassium is very
violent in its action and would burn the leather as well as the brushes
used to apply it. It should only be employed, and that very sparingly, for
such purposes as black lettering. Pearl-ash should be used in preference,
but also with great caution, or it will not only destroy the surface, but
rot the substance of the leather.</p>
<p>Potash is soluble in water to saturation point, that is to say, a given
quantity of water will not dissolve more than a given quantity of potash.</p>
<p>It is very difficult to measure the exact strength to use; that which is
barely sufficient to penetrate and colour a surface artificially made
smooth by rolling, will sink in where the leather has been cut or punched
and immediately darken it considerably. It is a good plan therefore to
experiment on a spare piece of the leather. Potash lye is more easily used
in the right proportion, and may be employed for staining very light
coloured leather.</p>
<p>Soda has the same effect as potash, except that it is a little less
strong; both substances have always been much employed in dyeing skins.
Permanganate of potash is supposed to dye a mouse-grey colour, but it is
most uncertain in its action, as it depends entirely on the porosity of
the leather. Xanthin and catechol browns are pleasing in appearance, but
their effect is less rich than that obtained with potash. They become
improved by hard rubbing with encaustic.</p>
<p>Sulphate of iron has a strong and persistent odour and is also somewhat
injurious. It is useful, however, and produces a colour varying from a
light shade to an
intense<!--093.png--><span class="pagenum"><a name="Page_66" id="Page_66">66</a></span>
violet black. When used over potash, a dead
black is obtained.</p>
<h3>REDS</h3>
<p>Alizarin, the colouring principle of madder, which can also be obtained
from coal-tar, is employed in many colour combinations and gives a fine
durable red. Hydrochloric acid changes it to violet. Carthamine and
cochineal also produce good reds; the latter is turned orange by the
action of hydrochloric acid.</p>
<p>Hydrochloric acid turns ammoniacal cochineal pink, but merely discolours
the red made from archil. Direct extracts of red wood are unaffected by
it.</p>
<p>The colouring matter of logwood, extracted by treating the powder obtained
from an aqueous decoction of the wood with spirit, is sold as hematoxylin.
Metallic salts convert it to a violet black, salts of tin change it to
pink, alkalis to blue, and acids to yellow. Durable pinks are obtained
directly from carthamine, the colouring matter of <i>Carthamus Tinctorius</i>.</p>
<h3>YELLOWS</h3>
<p>The base of most fine yellows is picric acid. The chromates of zinc and
baryta give very permanent yellows, which are particularly useful in
mixing greens.</p>
<p>The vegetable yellows are less durable. They include turmeric, which is
especially fugitive, and quercitron; the former is turned red, and the
latter brown, by the action of hydrochloric acid.</p>
<p>Orange tints are easily obtained by using red over yellow, first allowing
the yellow to dry completely; or they can be bought ready prepared with
alizarin. Mandarine and nasturtium tints can also be bought ready
prepared, or may be made by a mixture of vegetable colour, such as saffron
and arnotto.</p>
<!--094.png-->
<div class="figcenter" style="width: 447px;"><a id="plate_14"></a>
<img src="images/i_094.jpg" width="447" height="642"
alt="" />
<span class="caption">14. <span class="smcap">Embossed and punched brown calf binding.
<i>Rubáiyát of Omar Khayyám.</i> Designed by Mary G. Houston. Modern English.</span></span>
</div>
<!--096.png-->
<p><span class="pagenum"><a name="Page_67" id="Page_67">67</a></span></p>
<h3>BLUES</h3>
<p>Good and durable blues are obtained from indigo and alizarin.</p>
<h3>GREENS</h3>
<p>Greens of every composition are fugitive, especially those sold ready
mixed. Better results are obtained by applying yellow and blue one over
the other than by the direct application of the colour, but when the range
of tints thus afforded is too restricted, recourse must be had to some of
the numerous dyes varying in tint from greenish yellow to deep olive.
Successive applications of sulphate of iron and picric yellow will produce
the latter colour, and a vegetable green, which, however, is not very
durable, is made from buckthorn berries.</p>
<hr class="tb" />
<p>All the dyes which have been just enumerated, which form, however, but a
very small proportion of those in existence, are employed in dyeing
textiles. These materials have first to be treated with mordants such as
tannin, chrome or sumach, in order that they may take the dye, whereas
leather is already prepared to receive it by the tanning process.</p>
<p>Ordinary water-colours based on glycerine or albumen can be used in the
decoration of leather, but are recommended only for colouring small parts
of a design, partly because liquid colour is more easily applied over
large surfaces, and partly because, being less transparent, they do not
lend themselves to the process of rubbing which plays so important a part
in <i>patine</i>. Oil or spirit colours, on the other hand, possess a
transparency which allows of their being used over a ground coloured with
a different medium. When the leather on which they are painted is undyed
it should first receive a coat of paste.</p>
<p>Colours sold under the name of <i>patines grasses</i> will produce a groundwork
of great brilliancy, if well rubbed before they are quite dry.</p>
<!--097.png-->
<p><span class="pagenum"><a name="Page_68" id="Page_68">68</a></span></p>
<p>The use of <i>gouache</i> should be limited to the hollow parts of incised or
punched leather.</p>
<p>Gold and bronzes are also used with good effect.</p>
<h3>DIFFERENT METHODS OF COLOURING LEATHER</h3>
<p>Colours obtained from potash and sulphate of iron—dark green, dull red,
etc.—are much used for groundwork. Potash produces a warm brownish-red,
and tints, varying in colour from a pale to a dark slate grey, are
obtained with sulphate of iron. As already stated, a coating of picric
yellow over the latter will give a dull green.</p>
<p>In colouring large surfaces, it is best to use soft sponges, or small pads
of cotton-wool covered with soft linen. The pads can be held by the edges
of the linen and the sponges may be mounted on handles, but the best
protection for the hands against staining is a pair of very soft rubber
gloves like those used by surgeons.</p>
<p>The leather is first damped all over and the colour then applied in a
succession of even washes. Care must be taken not to unduly darken any
part of the leather by using too much colour, bearing in mind that
different parts of the skin will vary greatly in porosity. In colouring
groundwork with various superposed tints, the actual results are often
entirely different from those one has had reason to expect. So far as is
possible, in order to prevent this from happening, it is advisable not to
mix the colours of different makers on the same piece of work without
knowing their composition, or first experimenting with them on a spare
piece of the leather.</p>
<p>A second colour should never be added until the underneath one is dry, or
a muddy effect will result. If the colour becomes too dark, or if the
second stain predominates unduly instead of merging into the underneath
one, the whole work, fixed firmly on a board, should be dipped in water
and scrubbed with a very soft brush and
some<!--098.png--><span class="pagenum"><a name="Page_69" id="Page_69">69</a></span>
soft soap. It should then be
allowed to dry in the sun. This method of making the colour lighter can
only be used when the ornament is not in relief; it has been found
particularly successful in treating potash and sulphate dyes.</p>
<p>Ox-hide, light or fawn-coloured calf, pigskin and white morocco are
leathers suitable for colouring. They are, however, very absorbent, and
will require an application of paste before staining. This will also be
found indispensable in colouring the white split sheepskins used in
mosaic.</p>
<p>In staining leather for mosaic, several successive applications of colour
will be required, especially in the case of greens which sink in quickly.</p>
<p>In addition to plain dyeing, there are various methods of producing shaded
groundwork, marbling, sprinkling, etc.</p>
<h3>SHADED GROUNDWORK</h3>
<p>For shaded groundwork diluted colour is applied with a sponge or pad
worked over the leather with a circular movement, and the uniform tint
thus obtained is darkened as required by further applications with
stronger colour. In shading a ground from one colour to another, as for
example from dark olive to malachite green, orange red and pale yellow,
the edge of each colour, as it is put on, is covered with a piece of thick
paper, which must be firmly held in place, in order to prevent the colours
mixing where they come together.</p>
<h3>MARBLING</h3>
<p>A sponge with large holes is dipped in potash, sulphate of iron, or some
other deep coloured dye, and lightly applied over the surface of the
leather so that parts of it corresponding to the holes in the sponge are
left untouched; or the first application of colour may be made evenly over
the leather and the marbling worked, as described, in a second
application.<!--099.png--><span class="pagenum"><a name="Page_70" id="Page_70">70</a></span>
Many varieties of pattern can be obtained by moving the
sponge in different ways. Leather may be bought ready marbled by a
gelatine process.</p>
<h3>TREE MARBLING</h3>
<p>The leather is first lightly pasted over, and drops of water, more or less
large, are scattered upon it by jerking the handle of a small couch-grass
whisk full of water against the left wrist held a few inches from the
surface of the leather. A very little colour is then taken in the brush
and jerked in the same manner over the drops of water, with which it will
partially mix and give the effect of roots branching out in all
directions. Variety can be obtained by applying the water with a sponge
instead of the brush, and the colour in large drops over the whole or
certain parts only of the field, or by using dyes of different colours
which give curious effects in combining. After applying the dye, the
surplus moisture is absorbed with blotting-paper.</p>
<p>The leather may be bleached to a light tint by means of an oil-paint brush
dipped in
decolorant<a name="Anchor-12" id="Anchor-12"></a><a href="#Footnote-12"
class="fnanchor" title="Go to footnote 12.">[12]</a>;
the bristles of the brush are pushed back with
the finger and when released jerk the acid in fine drops over the surface.
The leather must be freshly and thoroughly damped so that the outline of
the bleaching shades off into the ground.</p>
<div class="footnote">
<p><a name="Footnote-12" id="Footnote-12"></a><a class="label" title="Return to text." href="#Anchor-12">[12]</a> See page <a href="#Page_71">71</a>.</p></div>
<h3>SPRINKLING</h3>
<p>Sprinkling is done with a rather close iron grating and a long narrow
brush like a plate-brush. The dye is prepared on a flat plate and the
brush dipped in it, the superfluous liquid being removed against the edge
of the plate. The brush is rubbed backwards and forwards on the grating
held horizontally a few inches above the leather over which it scatters a
fine shower of the dye. Should the colour froth on the grating, the brush
must at once be rubbed
upon<!--102.png--><span class="pagenum"><a name="Page_71" id="Page_71">71</a></span>
oiled paper. Sprinkling may also be done with
a vaporiser for fixing drawings, but it is difficult to get a sufficiently
fine shower so that the drops do not merge into each other.</p>
<div class="figcenter" style="width: 416px;"><a id="plate_15"></a>
<img src="images/i_100.png" width="416" height="495"
alt="" />
<span class="caption">15. <span class="smcap">Mirror Case of punched black leather, <i>cuir
bouilli</i>; executed by Miss Casella. Modern English.</span></span>
</div>
<p>The above process is a useful one when parts of the leather are to be
“reserved,” i.e., to remain untouched by the dye. For this purpose a piece
of strong paper is cut to the shape of the part to be reserved and pasted
lightly to the leather during the process of sprinkling, after which it is
damped and removed. Another method is to paint the reserved parts with one
of the two preparations given by Mons. Belleville in <i>Le Cuir dans la
Décoration Moderne</i>, afterwards removing it with benzine or petroleum
spirit:—“Eighty parts of colophony, 4 of yellow wax, 6 of spermaceti, 4
of tallow, 60 of spirit of turpentine and 10 of alcohol.”</p>
<p>Or, “One hundred parts of virgin wax, and the same of castor oil, with 25
of borax and 25 of copal varnish.”</p>
<hr class="tb" />
<p>Instead of reserving the parts of the leather, the dye may be removed
subsequently by means of reagents called decolorants. Sulphuric,
hydrochloric, oxalic, nitric, or muriatic acid diluted with water in the
proportion of one in five, can be used for this purpose, but their effect
should first be tried on a spare piece of the leather, as it will vary
according to the nature of the dye on which they are used. It should be
noticed that, in mixing the acid, the right quantity of water must be
measured out and the acid carefully added drop by drop. If water is poured
into acid it causes an explosion.</p>
<p>The outline is traced rather deeply on the leather, so that it is still
visible after the groundwork has been dyed. When the dye has sunk in, the
decolorant can be easily applied with a paint-brush. On modelled leather
dyed bronze green, a rag or piece of cotton-wool dipped in decolorant and
quickly passed over the relief, will lighten the colour and produce the
effect of bronze with the
exposed<!--103.png--><span class="pagenum"><a name="Page_72" id="Page_72">72</a></span>
parts rubbed lighter by use. Should the
effect of the acid be too strong, the colour may be again deepened by
washing the leather over with a yellowish gold stain, which will only take
effect on the relief, since it will merge into the darker colour of the
rest of the work. The same process may be employed on white calf with a
light olive dye to obtain the effect of old ivory. Even when much diluted,
however, the action of these acids must in the end be injurious to the
leather. They should be used with great care and never undiluted. Where
possible, washing the leather over afterwards with water will, to some
extent, diminish their harmful effect.</p>
<p>Stencilling is another process by which portions of the leather forming
the ornament are reserved from the dye used in colouring the ground. The
design is cut out of a very thin sheet of copper or tin. A large
short-haired
brush<a name="Anchor-13" id="Anchor-13"></a><a href="#Footnote-13"
class="fnanchor" title="Go to footnote 13.">[13]</a>
is used to take the dye from a plate, or pad, and
is then rubbed very lightly over the stencil firmly fixed on the leather.
Only the parts unprotected by the stencil will take the colour. The brush
must not be too full or the dye would have a tendency to run under the
stencil. The most suitable dyes are glycerine inks and marking inks
containing nitrate of silver. A variety of colours may be mixed with
glycerine for this purpose. The ink thus obtained is transferred to a
cloth pad, such as is used by printers, from which the brush will only
take the required quantity.</p>
<div class="footnote">
<p><a name="Footnote-13" id="Footnote-13"></a><a class="label" title="Return to text." href="#Anchor-13">[13]</a> <i>Pompon.</i></p></div>
<p>When the leather is dry a lighter tint, transparent enough to allow the
stencilled design to be visible through it, may be washed over the whole.
Excellent effects of considerable richness can thus be produced. The depth
of colour is further increased by the process of rubbing, which is
necessary to the proper <i>patine</i> of leather. If done with wax, encaustic
or varnish, it is an effective protection for the surface of the leather
against deterioration from
outside<!--104.png--><span class="pagenum"><a name="Page_73" id="Page_73">73</a></span>
causes. With certain soft leathers, if
the colour has not sunk in deeply, rubbing with the finger alone will give
it great brilliancy; with other leathers the rubbing will produce an
effect in proportion to the degree of porosity of the skin. It should
always be done before the colour is dry, but not until it has penetrated
sufficiently into the leather not to return to the surface with the
pressure. The middle finger is used. A certain amount of polish can be
given to the leather by rubbing it only with the finger (moistened with a
little oil to allow it to slide easily), or, for a large surface, with the
side of the hand instead of the finger. When a medium is used, it is
applied with a circular movement by means of flannel or rag; a flannel
brush consisting of a series of little flannel rolls, which can be bought
at a surgical instrument-maker’s, is very useful for a large surface
requiring much rubbing. Pure wax, which must be softened in the hand to
make it spread evenly, encaustic and spirit varnish are all efficacious in
preserving the colour and increasing its transparency.</p>
<p>Another method giving excellent results consists in applying opaque
colour, <i>gouache</i> or bronzes in the hollows of a design and removing the
surplus of the colour by rubbing. In this way an incised design can be
boldly outlined in light on a dark ground, and may afterwards be bleached
within the outlines if desired. After cutting the design on the leather,
the whole surface is washed over with potash or any other dark stain, a
coat of paste is then applied and immediately wiped off, so that some of
it only remains in the hollows. When the paste is dry, some rather liquid
<i>gouache</i> is washed over and run into the lines, any remaining on the
surface being removed by vigorous rubbing with a damp rag. The same
process may be applied to the hollows of punched leather. In using bronzes
or gold in powder, some spirit varnish or specially prepared varnish is
necessary to make them adhere. After applying the varnish, the surface is
wiped over to remove
all<!--105.png--><span class="pagenum"><a name="Page_74" id="Page_74">74</a></span>
except that which is deposited in the
interstices, and when this is sufficiently dry to hold the powder, the
latter is put on with a very soft, short-haired brush and adheres to the
varnish. The surface is then rubbed in the manner already described. All
powder colours do not mix equally well with varnish; green and blue
bronzes often change colour when brought in contact with it. Gold and
silver powder give good results, used either dry or mixed with gum on
shells. Chinese vermilion may also be employed with varnish, but other
colours are more suitable for this purpose when prepared in the form of
<i>gouache</i>.</p>
<h3>GILDING</h3>
<p>Special manipulation is required for gold leaf applied to the decoration
of leather. For gilding over a whole surface, as for instance an aureole
round the head of a saint, the following is the best method. Several
layers of starch paste are painted with a brush over the part of the
leather to be gilded, and followed when dry by a little gelatine paste. A
coating of some special preparation is then applied and allowed to dry to
the right condition to retain the gold leaf, which varies according to the
nature of the preparation; the degree of moisture can be tested with the
finger. Gold leaf is sold in small books and is exceedingly thin. A
flexible knife, like a palette knife, is used to manipulate it, and a
single leaf is laid on a cushion of deerskin stuffed with wadding, and cut
to the required size. It is then placed over the preparation on the
leather and lightly pressed down with a very soft, round, short-haired
brush.</p>
<div class="figcenter" style="width: 433px;"><a id="plate_16"></a>
<img src="images/i_106.png" width="433" height="566"
alt="" />
<span class="caption">16. <span class="smcap">Black Morocco binding with applied panels of
tooled, cut, painted and gilt calf. <i>Le Roman de Tristan et Iseut.</i>
Designed by Robert Engels. Modern French.</span></span>
</div>
<p>For gilding with hot tools a specially prepared powder made of resin or
gum is used. This powder melts with the heat of the tool and causes the
gold leaf to adhere to the leather only where it comes in contact with the
parts of the tool cut in relief. The process is as follows: Some powder is
lightly spread over the part of the leather
to<!--108.png--><span class="pagenum"><a name="Page_75" id="Page_75">75</a></span>
be gilded and a piece of
gold leaf laid over it, the tool is heated sufficiently to melt the powder
without burning the leather and is carefully applied on the right spot,
the surplus gold being afterwards removed with the short brush. The tools
used by bookbinders are slightly convex, so that firm and even pressure of
the whole tool can be exerted by first inclining the handle towards the
gilder, and then raising it while still maintaining the pressure and
inclining it at the opposite angle.</p>
<p>Gold can also be applied with a brush in the form of powder suspended in
liquid gum or spirit varnish. If it does not spread evenly, owing to there
being too much liquid in proportion to the powder, dry powder may be added
where necessary with a short brush when the liquid is almost dry.</p>
<p>Shell gold is applied with a slightly damped brush and, when dry, may be
burnished with an agate or punch; the design of the punch will stand out
in bright gold on a ground of dull gold. The pressure of the wrist is
sufficient to work the punch and a hammer should not be used.</p>
<hr class="tb" />
<p>There is an interesting field for the artist’s enterprise in the discovery
of new processes for the decoration of leather by means of colours and
bronzes. It is not possible within the limits of a single chapter to give
a complete list of the many methods that may be
employed.<a name="Anchor-14" id="Anchor-14"></a><a href="#Footnote-14"
class="fnanchor" title="Go to footnote 14.">[14]</a></p>
<div class="footnote">
<p><a name="Footnote-14" id="Footnote-14"></a><a class="label" title="Return to text." href="#Anchor-14">[14]</a> As a conclusion to this chapter, the French edition quotes
from the <i>Bulletin de la Société de l’Encouragement pour l’Industrie
Nationale</i> some extracts from the <i>Report of the Committee on Leather for
Bookbinding</i>, published by the Society of Arts in London (1901), which
will be found in the Note at the end of this volume.</p></div>
<hr class="chap" />
<!--109.png-->
<p><span class="pagenum"><a name="Page_76" id="Page_76">76</a></span></p>
<h2>CHAPTER V</h2>
<div class="c3">THE CHOICE OF DESIGN AND COLOUR</div>
<p>The present chapter is devoted to some remarks on colour combination and
the composition of ornament, based on the personal experience of the
author.</p>
<p>Three colours, for the groundwork, ornament and high lights respectively,
will, in many cases, be found sufficient for a scheme of decoration. A
multitude of colours, worked in great detail on a relatively small
surface, confuse the eye and hinder it from grasping the effect of the
decoration as a whole. Only special styles of decoration, such as Moorish
geometrical patterns, allow of the use of a great variety of colours. The
circumstance already explained, that in leather decoration dyes may be
used one over the other, enables interesting effects to be produced.</p>
<p>A design of sea, with seaweed and fish, can be effectively rendered
entirely with sulphate of iron of varying strength. A weak solution is
washed evenly over the whole; the waves are then drawn in with a flat
brush dipped in a stronger solution, and the dark outlines afterwards
bleached with acid where they border the first tint. The fish and seaweed
in relief are similarly treated with decolorant, and a light wash of
yellow over the whole completes an effective decoration.</p>
<p>The foliage of the chestnut tree in autumn lends itself exceptionally well
to decorative treatment, both as regards form and colour. The large
variety of greens and yellows are most effective on a ground of brickdust
red.</p>
<!--110.png-->
<p><span class="pagenum"><a name="Page_77" id="Page_77">77</a></span></p>
<p>A groundwork of soft grey, brightened by an underwash of very pale yellow,
is suitable for reserved or bleached designs. Deep carmine constitutes a
rich colour for groundwork, and is produced by using bright red over
potash and deepening the effect by rubbing.</p>
<p>In planning a decoration, the artist has generally some special effect in
his mind which he wishes to reproduce. It is not unusual, however, for the
result to be totally different from what is anticipated, since uncertainty
constitutes one of the charms of the art of colouring leather. These
failures, as they may be considered from one point of view, often produce
interesting effects and sometimes lead to valuable discoveries.</p>
<p>Marbled leather should be decorated with flat ornament only.</p>
<p>Figures in high relief belong properly to the domain of the sculptor and
should be avoided in leather work, much of its individuality lying in the
value of the outline in producing an effect of relief.</p>
<p>Some skilful artists produce in leather not only the relief, but the
turned over edges of petals, etc., and treat twisted ribbons in open-work;
the result, though pleasing, is essentially evanescent, owing to the
extreme fragility of the detached portions of the leather.</p>
<p>Of all the uses to which leather work may be applied, none offer greater
scope to the inspiration of the artist than bookbinding. It has become the
fashion not only to provide a more or less rich covering for a beautiful
edition, but to suggest in its design the nature of the contents of the
volume, should these lend themselves to such treatment. The artist,
however, will do well to practise this principle with due restraint,
avoiding, on the one hand, what may be called anecdotal design, and, on
the other, an over subtle symbolism.</p>
<p>Leather coffers, when well executed, constitute veritable works of art.
They present considerable difficulties
in<!--111.png--><span class="pagenum"><a name="Page_78" id="Page_78">78</a></span>
the mounting of the leather
over the wooden coffer so that the lines of the ornament come exactly in
the right place. It is necessary that the lines forming the framework of
the design should accurately correspond with the dimensions of the coffer
to be covered. A coffer usually consists of a box with a hinged lid; the
measure is taken by laying the leather round the whole; the leather is
then cut, leaving a small surplus at the edges to be pared and folded over
at the sides. The join should be arranged for at the lower border and not
at the intersection of the lid and the box. The leather at this point is
better left to be cut after it has been stuck on the wood in mounting.</p>
<p>When the leather is decorated in mosaic and consists of panels each
enclosed within a patterned border, the probability of its stretching when
it is fixed on the wood, must be taken into consideration; Cape morocco,
however, if fairly thick will hardly stretch perceptibly.</p>
<p>During the process of outlining the design, which is done before mounting
the leather on the wood, it should be stretched to its full extent on a
flat board.</p>
<p>When the decoration is in relief, the padding should be very firm, so as
to counteract the tendency to stretch during the process of mounting.</p>
<p>Generally speaking, designs based on naturalistic flowers do not give the
most satisfactory effects in the decoration of coffers, since the style is
not suited to the restricted size of the panels, even when the design
ignores them and extends beyond. Designs in the modern style, or Gothic
designs in the style of the fifteenth century, or those based on the
Arabic decoration of the best period, are much to be preferred; in the
last two styles punches used with a hammer will greatly assist in lowering
the groundwork, so that the design stands out in relief without the
necessity of stuffing it, as in embossed work. By introducing <i>gouache</i> or
bronzes into the impressions made with the punches, rich effects of colour
can be produced.</p>
<!--112.png-->
<div class="figcenter" style="width: 436px;"><a id="plate_17"></a>
<img src="images/i_112.jpg" width="436" height="654"
alt="" />
<span class="caption">17. <span class="smcap">Binding of stained calf, cut, embossed, tooled
and <i>patinated</i> by Henri Godin. Modern French.</span></span>
</div>
<!--114.png-->
<p><span class="pagenum"><a name="Page_79" id="Page_79">79</a></span></p>
<p>There are numerous other styles appropriate to the decoration of leather
coffers.</p>
<p>In the decoration of large surfaces, such as the panels of wall-hangings,
the artist is cautioned against the abuse of detail, frequently the
stumbling-block of the beginner. He is recommended to exercise a wise
restraint in his composition, and to avail himself of the numerous
resources of the conventional art of the modern school more particularly
in their application to the ornamentation of large surfaces. Technical
efficiency in the use of the tools is essential and must be gained by
practice, but may be said to be second in importance to a thorough
knowledge of decorative design, which can be attained only by the
intelligent study of the best models. The education of the eye is a
considerable factor in the conventional interpretation of natural forms.
The artist cannot do better than to study the ancient Japanese school,
which has found such favour with the initiators of the so-called “Modern
Art,” and which affords the best examples of balance in design in its
rejection of unnecessary detail in the interpretation of natural forms. He
may also find inspiration in the fields of Egyptian and Assyrian art, in
the interlaced patterns of the disciples of St. Dunstan, and in the quaint
renderings of leaves and flowers in the hangings and brocades of the
Middle Ages.</p>
<hr class="chap" />
<!--115.png-->
<p><span class="pagenum"><a name="Page_80" id="Page_80">80</a></span></p>
<h2>APPENDIX</h2>
<div class="c3">LEATHER HANGINGS AND FURNITURE</div>
<p>The origin of the use of decorated leather for hangings and furniture has
been the subject of much controversy. After consulting various books on
the subject, we believe, as already stated, that its introduction into
Spain may be attributed to the Moorish conquerors about the eighth
century. In an Arabian manuscript of the sixth century of the Mohammedan
era, mention is made of the industry as flourishing in the town of
Ghadames in the Sahara. Jehan de Garlande, author of a Latin dictionary
composed in 1080, mentions <i>Cordouans</i> first manufactured at Cordova in
the eleventh century. About the same time, the Monk Theophilus, in his
curious encyclopædia of the arts which unfortunately has not come down to
us in its complete form, gives the following description of the processes
of gilding leather:—</p>
<div class="blockquot">
<p>“For laying on gold or silver, take the clear liquid of white of
egg beaten up without water, paint some with a brush over the
part which is to receive the gold or silver. Damping the end of
the same brush in your mouth, bring it in contact with a corner
of the cut leaf (of gold or silver). Then lifting it with
extreme rapidity, you lay it on the prepared place and spread it
with a dry brush. At this point you must take precautions
against a draught, you must hold your breath, for if you breathe
you will lose the leaf and find difficulty in recovering it.
When in position and dry you may, if you wish, put a second over
it in the same way, and then
a<!--116.png--><span class="pagenum"><a name="Page_81" id="Page_81">81</a></span>
third, if it is wanted, so as to
be able to give a more brilliant polish with a burnisher.</p>
<p>“You can, if you wish, apply the leaf on a ceiling or a wall; in
the same manner, over a lining of tinfoil. If you have neither
gold nor silver, you will use tinfoil, which you will apply
thus....”<a name="Anchor-15" id="Anchor-15"></a><a href="#Footnote-15"
class="fnanchor" title="Go to footnote 15.">[15]</a></p></div>
<div class="footnote">
<p><a name="Footnote-15" id="Footnote-15"></a><a class="label" title="Return to text." href="#Anchor-15">[15]</a> <i>Theophili Presbyteri et Monachi</i>, Libri 3 <i>seu Diversarum
artium schedula</i>. Chapter 24.</p></div>
<p>Until the middle of the seventeenth century, hangings, and even carpets,
of decorated leather formed an important item in those inventories of
princely possessions which are such a reliable and inexhaustible source of
information for the historian of the sumptuary
arts.<a name="Anchor-16" id="Anchor-16"></a><a href="#Footnote-16"
class="fnanchor" title="Go to footnote 16.">[16]</a>
Princes and other
great personages depended largely on decorated leather and tapestries,
when moving from place to place, to supplement the often hastily
improvised decoration of their temporary apartments.</p>
<div class="footnote">
<p><a name="Footnote-16" id="Footnote-16"></a><a class="label" title="Return to text." href="#Anchor-16">[16]</a> <i>Dictionnaire de l’Ameublement et de la Décoration depuis le
13me Siècle jusqu’à nos Jours</i>, by Henry Havard.</p></div>
<p>The enumeration of all the different processes by which the leather was
ornamented would carry us beyond the limits of this appendix, and we will
confine ourselves to tracing in outline the development of the art of
working in leather as applied to hangings and furniture during the last
few centuries.</p>
<p>First in order of time we find skins covered with hair, sewn together for
carpets or hangings; different kinds being placed side by side, either
irregularly, or alternately to form a pattern. We are not, however, here
concerned with anything but leather proper, that is to say, skins with the
hair removed, and this was first decorated by means of a hot tool. The
addition of colour speedily followed. Dark coloured leathers were also
sewn as borders on lighter ones, and polished metal ornaments were added
to brighten the leather groundwork, a fashion borrowed from the method of
joining and strengthening the accoutrements of war.</p>
<!--117.png-->
<p><span class="pagenum"><a name="Page_82" id="Page_82">82</a></span></p>
<p>Little by little, as the custom spread of reproducing the human figure and
animals, attempts were made to carry out whole pictures on panels made of
leather sewn together with the seams hammered flat. But painted leather
was still generally of comparatively small dimensions, and it would seem
that these pictures were designed chiefly for the ornamentation of chests.
The leather was first stretched over wooden panels, several panels being
sometimes placed side by side. A special paste was used, the object of
which was to cause the leather to shrink when dry, so as to make the
panels adhere more closely together. The following description by the Monk
Theophilus of the paste used in his time for this sort of work may
interest the reader:—</p>
<div class="blockquot">
<p>“Panels for altars or doors are made thus:—First join some
boards carefully one by one with the help of the joining tool
used by coopers or joiners. They must be fastened together with
cheese paste made in the following manner:—Some soft cow’s-milk
cheese is cut very thin and washed with hot water in a mortar
with a pestle, changing the water until it comes out clear. The
cheese after being pressed in the hand is put into cold water
until it hardens. It is then well crushed with a piece of wood
on a smooth wooden table. In this condition it is put back into
the mortar to be carefully pounded with the pestle, after having
added water mixed with quicklime till it becomes thick like a
sediment. Panels put together with this paste when dry, stick so
fast that neither damp nor heat can separate them. They must
then be made even with a special tool for this purpose. This
tool, curved and sharp on the inside, has two handles, so that
it may be used with both hands. It is used to level panels,
doors and shields until they are perfectly smooth. They are then
covered with untanned mule-skin or ox-hide, after it has been
wetted and the hairs scraped off. The water is partly squeezed
out, and while still damp it is stuck on with the cheese
paste.”<a name="Anchor-17" id="Anchor-17"></a><a href="#Footnote-17"
class="fnanchor" title="Go to footnote 17.">[17]</a></p></div>
<div class="footnote">
<p><a name="Footnote-17" id="Footnote-17"></a><a class="label" title="Return to text." href="#Anchor-17">[17]</a> <i>Theophili Presbyteri et Monachi</i>, Libri 3 <i>seu Diversarum
artium schedula</i>. Chapter 17.</p></div>
<!--118.png-->
<div class="figcenter" style="width: 438px;"><a id="plate_18"></a>
<img src="images/i_118.png" width="438" height="547"
alt="" />
<span class="caption">18. <span class="smcap">Gold-tooled and inlaid Morocco binding. <i>The
Letters of Princess Lieven.</i> By S. T. Prideaux. Modern English.</span></span>
</div>
<!--120.png-->
<p><span class="pagenum"><a name="Page_83" id="Page_83">83</a></span></p>
<p>In the eleventh century we come to the first employment of gold leaf on
decorated leather, whence is derived the name, “or basané,” which it
afterwards received. The passage describing the process of gilding has
been quoted already (page <a href="#Page_80">80</a>), but each master of the art no doubt
introduced his own modifications.</p>
<p>With the introduction of gold, leather decoration assumed a magnificence
and importance hitherto unknown. The heads of the saints were surrounded
with golden haloes, and the gold and silver embroideries of the sacerdotal
ornaments were carried out in those metals on the leather. A little later
the knights are represented clad in brilliant armour with plumed helmets.
The correct rendering of the heraldic colouring of the coats of arms
figuring on shield and target then necessitated the use of a more extended
range of oil colours, until, little by little, decorated leather grew to
resemble the paintings of Van Orley.</p>
<p>Meanwhile, punches, cut in relief or in intaglio and used with a hammer,
were adopted to break the monotony of the groundwork and throw up the
relief of the ornament, and the fashion also arose of embossing leather
with a modelling tool or by means of stamps, the latter method necessarily
resulting in the substitution of repeating ornament for figures and
landscapes.</p>
<p>Leather manufactured in Spain, Portugal, Flanders, and later in England is
almost always decorated in high relief with touches of gold, the design
being principally flowers, foliage, cupids, pomegranates, etc. Venice
alone remained faithful to flat decoration with hollowed or merely
darkened outline in the cameo-like medallions of classical scenes painted
on groundwork whose design was borrowed from the gorgeous stuffs of the
East.</p>
<p>The fashion imported from Italy in the reign of Francis I of breaking up
surfaces with pilasters, cornices, medallions and ornaments in relief, was
instrumental in
adding<!--121.png--><span class="pagenum"><a name="Page_84" id="Page_84">84</a></span>
importance to small painted designs on leather
rather than to hangings properly so called. Some of these leather
paintings were like pictures and were used not only for wall decoration,
but as hangings for beds and even as bedspreads of state. The custom of
thus decorating beds lasted a long time. Pierre Bénard, an upholsterer by
trade, established in Paris, and author of a collection of songs dedicated
to the “Vertueuse Royne Marguerite,” first wife of Henri IV, refers to the
use of “or basané” in this manner as an evidence of wealth.</p>
<p>Already under Catherine de Médicis, decorated leather had become extremely
popular, and was preferred to all other hangings for the embellishment of
apartments; its popularity lost nothing under the second wife of Henry IV,
in whose native country this style of decoration was also held in great
favour. In the reign of Louis XIII the influence of Anne of Austria
brought Spanish leather again into fashion. From that time also, leather
gilt or stamped in its natural colour and ornamented with copper nails
(probably inspired by the marriage chests with their curious studded
ornament) was found in the mansions of the great and became the principal
material for covering chairs.</p>
<p>The grandiose style of architecture of the time of Louis XIV called for
the decoration of spaces framed in gorgeous pilasters and was favourable
to the application of decorated leather in the style of Bérain. But this
did not long remain popular, and leather was replaced by Gobelin and other
tapestries made in France, whose introduction gave the deathblow to the
manufacture of leather hangings.</p>
<p>From this period till the present day the art of gilding leather has been
on the decline. Of this no further proof is needed than the following
preface written in 1762 by Fougeroux de Boudaroy, who had been
commissioned by the Academy to take over the work of research, previously
conducted by Réaumur, on the subject of leather hangings:<!--122.png-->—</p>
<div class="figcenter" style="width: 451px;"><a id="plate_19"></a>
<img src="images/i_122.png" width="451" height="633"
alt="" />
<span class="caption">19. <span class="smcap">Back and Seat of Chair in cut, embossed and
gilt cowhide with punched background. Executed by Rosalie Vigers from a
design by Frederick Vigers. Modern English.</span></span>
</div>
<!--124.png-->
<p><span class="pagenum"><a name="Page_85" id="Page_85">85</a></span></p>
<div class="blockquot">
<p>“Flanders, Holland and England are reputed to have furnished the
first gilt or silvered leather hangings seen in Paris. Some
attribute their invention to Spain, but without apparent reason,
since to-day there are in France no such hangings of Spanish
manufacture, nor are they much known in that country. The gilt
leather hangings which come to us from Flanders are nearly all
made at Lille, Brussels, Antwerp and Mechlin; those derived from
the last-named place are the most prized of all. Some very fine
ones which we have attempted to imitate are made in Venice;
manufactures were also started at Lyons and met with success.</p>
<p>“It was only about two centuries ago that this trade was
established in Paris. We owe it to some Flemish workmen who
settled in the capital and left successors there. But on account
of the nation’s prejudice in favour of all that comes from
abroad, the hangings from Holland and Flanders were always
preferred to those of our own manufacture, although they did not
surpass the latter in quality or in beauty.</p>
<p>“Though equalling those of Holland and Flanders, it was not
possible to find a sale for our hangings unless they were passed
off as having been made in one or other of those provinces, and
this was frequently done by our manufacturers. It must, however,
be admitted that certain gilt leather hangings from England and
Venice have never been equalled here. We are forced to allow
their superiority in brilliancy, beauty of design and
durability. Perhaps all that our workmen needed to be able to
imitate them perfectly was to feel the assurance of greater
constancy in our tastes, and to witness the cessation of that
affection and preference for everything foreign, which might
lead to the more favourable treatment of the native industry.</p>
<p>“Gilt leather hangings were at one time much sought after. Their
qualities of being, unlike woollen and other materials,
unaffected by damp and insects, of retaining their brilliancy
unimpaired by time, of not attracting dust, and of allowing it
to be easily removed by washing with a sponge, and finally, of
not lending themselves to the multiplication of the insects
which in summer infest the capital and which find in other
tapestries convenient nests for depositing their eggs, were all
advantages, forming so many reasons for their being in demand
and gaining for them a place in the apartments of the
great,<!--125.png--><span class="pagenum"><a name="Page_86" id="Page_86">86</a></span>
of
which they frequently constituted the ornament. But to-day, a
change of taste and the dictates of fashion which outweighs even
the advantages and conveniences of life, have caused them to be
almost forgotten and relegated them to the ante-rooms of a few
county houses where some of the earliest are to be found, nearly
as beautiful as when they were first made in Paris.</p>
<p>“Now that the art is less in vogue, we think it a suitable time
to describe it to the public, thus following the intention of
the Academy of allowing nothing to be lost that may now or
hereafter be useful to the cause of art. We may at any time be
desirous of returning to these older fashions, no longer being
able to vary them, and this may be among those destined to
return to favour. At any rate, it will be agreed that some of
its processes merit description, and might find their
application in other arts and help in bringing them to
perfection.”</p></div>
<div class="figcenter" style="width: 446px;"><a id="plate_20"></a>
<img src="images/i_126.png" width="446" height="670"
alt="" />
<span class="caption">20. <span class="smcap">Embossed calf binding. <i>Book of Common
Prayer.</i> Executed by Rosalie Vigers from a design by Frederick Vigers.
Modern English.</span></span>
</div>
<p>The same author describes minutely and very clearly the various processes
in use at the time for gilding or silvering leather. Instead of
silver-gilt, which is necessarily very costly, he recommends silver leaf
burnished and covered with a varnish, for which he gives the following
recipe, found by him, as he modestly acknowledges, among the papers of
Mons. de Réaumur:—</p>
<div class="blockquot">
<p>“Take four and a half pounds of colophony, the same quantity of
ordinary resin, two and a half pounds of sandarach and two of
aloes; mix these four drugs together, after having broken up
those which are in large pieces, and put them in an earthen pot
on a good charcoal fire. It is better for the fire to be of
charcoal, because it makes but little flame, which would be
dangerous if it should enter the vessel, as the ingredients are
very inflammable. To guard against this accident and others of
which we will speak later on, the vessel must be chosen large
enough not to be more than half-filled by the drugs already
mentioned and the others yet to be added, as will presently be
explained. It is well also for it to widen out at the top, or to
have a rim that will project the flame outwards. These are small
precautions which it is always better to take; some, however,
neglect them,
and<!--128.png--><span class="pagenum"><a name="Page_87" id="Page_87">87</a></span>
make their varnish on a wood fire, and then
double attention must be given to prevent the drugs igniting.</p>
<p>“Melt all these drugs in the pot and stir them with a spatula so
that they mix together and do not stick to the bottom. When they
are well melted, pour in seven pints of linseed oil and mix it
with the drugs, using the spatula. Cook the whole, stirring it
from time to time to prevent as much as possible a kind of
sediment which forms and does not mix with the oil from sticking
to the bottom of the vessel. When the varnish is cooked, pass it
through a cloth or strainer.</p>
<p>“This quantity of varnish should, according to workmen, remain
seven to eight hours on the fire to cook, but this cannot be
regarded as an invariable rule. It will not take so long to cook
on a large fire. A better test used by workmen in manufacturing
varnish is to take a few drops of the liquid with the spatula
and lay it over silver leaf on some leather; or else they take
some of the varnish in a silver spoon and, by trying it with the
finger tip as if it were syrup, find out if it is cooked enough.
If it ropes in cooling, or if the finger has a tendency to stick
when it is gently withdrawn, it is a sign that it is
sufficiently cooked, that is to say that it has arrived at the
consistency of a thickish syrup. The varnish is then brown in
colour, and curiously enough when laid over silver it becomes
transparent and gives the effect of brilliant gold.”</p></div>
<p>While on the subject of gold groundwork made with gold or silver leaf or
tin-foil covered with varnish to imitate the colour of gold, it is curious
to note how far back in the history of art its origin can be traced; after
the Greeks, the Byzantines made use of and, it may also be said, abused
it. This want of moderation in the use of gold is to be met with long
afterwards, for it is mentioned in his book on painting by L. Benedetto
Alberti who died in Rome in
1472.<a name="Anchor-18" id="Anchor-18"></a><a href="#Footnote-18"
class="fnanchor" title="Go to footnote 18.">[18]</a></p>
<div class="footnote">
<p><a name="Footnote-18" id="Footnote-18"></a><a class="label" title="Return to text." href="#Anchor-18">[18]</a> <i>Sunt qui auro immodice utantur, quam aurum putent historiæ
affere majestatem.</i> L. B. Alberti, <i>De Pictura</i>, Book 2, page 25, <i>ad
finem Vitruv. Elzevir. f.</i></p></div>
<p>Van Orley, Raphael’s pupil, when painting his
“Last<!--129.png--><span class="pagenum"><a name="Page_88" id="Page_88">88</a></span>
Judgment” at Antwerp,
had his panel gilt in order to obtain “a beautiful
transparency.”<a name="Anchor-19" id="Anchor-19"></a><a href="#Footnote-19"
class="fnanchor" title="Go to footnote 19.">[19]</a></p>
<div class="footnote">
<p><a name="Footnote-19" id="Footnote-19"></a><a class="label" title="Return to text." href="#Anchor-19">[19]</a> Decamps. <i>Vie des peintres flamands.</i> Paris, 1753, 4 vols.
Vol. 1, page 39.</p></div>
<p>We have quoted above the formula for golden varnish given by Fougeroux de
Boudaroy which he ascribes to Réaumur. It may be found interesting to
compare with it that given by the Monk Theophilus in his <i>Diversarum
Artium Schedula</i>:—</p>
<div class="blockquot">
<p>“Put some linseed oil in a small new pot; add some gum arabic
called <i>fornis</i> pounded very fine; this gum is like very light
incense, but is more brilliant when broken up. Place it on a
charcoal fire and cook it carefully without allowing it to boil,
until it is reduced by one third. Be very careful of flames, for
they are very dangerous, and the preparation is difficult to
extinguish if it once catches fire. Any painting coated with
this varnish becomes brilliant, beautiful and perfectly
lasting....</p>
<p>“Another method. Arrange three or four stones which will stand
the fire without breaking, or bricks may be used instead. On
these place a new pot, pour into it some <i>fornis</i> mentioned
above, called by the Romans “glossa,” otherwise gum arabic. Over
the opening of the pot, put a smaller one having a little hole
at the bottom; fill in with clay so that no space remains
between them. Carefully light a fire underneath the apparatus
until the gum liquefies. You will also have a thin tool with a
handle which will serve to stir the gum and to find out the
exact moment when it becomes perfectly liquid. Have a third pot
on charcoal by you in which there is hot linseed oil; when the
gum is quite liquid, so that a thread of it hangs from the tool
when it is withdrawn, pour in the hot oil, stir with the tool,
and, when in this condition, cook all together without letting
it boil, take out the tool from time to time and spread a little
of the mixture on wood or stone to try its density. With regard
to the proportion, be careful that there are two thirds of oil
to one of gum. When it is cooked according to your judgment,
take it off the fire and, covering it with care, let it cool.</p>
<!--130.png-->
<p><span class="pagenum"><a name="Page_89" id="Page_89">89</a></span></p>
<p>“<i>Of the Method of Colouring Tinfoil to give it the Appearance
of being Gilt, so that it may be used when Gold cannot be had.</i></p>
<p>“Place the pieces (of tinfoil) side by side on the board, fasten
them one by one to the wood with wax, so that they cannot get
displaced, spread over them with the hand a coating of the
varnish described above, and let them dry in the sun. After that
take some sticks of rotten wood cut in April, slit in half and
smoke dried. Peel off the outer bark and the second, which is
the colour of saffron; scrape it into a clean vessel, adding to
it a fifth part of saffron, macerate it well in old wine or ale;
after letting it stand during the night, make it lukewarm the
next morning. When in this condition, dip in the sheets of
tinfoil one by one, frequently taking them out until you find
them assume a golden shade, when you will again fix them on the
wooden board and apply a coat of varnish as before; when dry you
will have sheets of tinfoil that you can use as you wish in your
work....”<a name="Anchor-20" id="Anchor-20"></a><a href="#Footnote-20"
class="fnanchor" title="Go to footnote 20.">[20]</a></p></div>
<div class="footnote">
<p><a name="Footnote-20" id="Footnote-20"></a><a class="label" title="Return to text." href="#Anchor-20">[20]</a> <i>Diversarum artium schedula</i>, Book 1. Chapters 21 and 36.</p></div>
<p>Although it may not be possible for an amateur, incompletely equipped with
the necessary implements, to reproduce the marvellous work of a byegone
age, there are still many methods of decoration for him to attempt which
will be equally attractive in modern surroundings.</p>
<hr class="chap" />
<!--131.png-->
<p><span class="pagenum"><a name="Page_90" id="Page_90">90</a></span></p>
<h2>NOTE</h2>
<div class="c3">SOME EXTRACTS FROM THE REPORT OF THE COMMITTEE ON<br />
LEATHER FOR BOOKBINDING, APPOINTED BY THE COUNCIL<br />
OF THE SOCIETY OF ARTS, FEBRUARY, 1900.</div>
<p>“This Committee met for the first time on May 3, 1900.... Its first step
was to appoint two Sub-Committees from amongst its members. The first of
these was to visit a selected number of libraries, and to ascertain the
comparative durability of the various bookbinding leathers used at
different periods and preserved under different conditions.... The second
... was appointed to deal with the scientific side of the matter, to
ascertain the cause of any deterioration noticed, and, if possible, to
suggest methods for its prevention in the future....</p>
<p>“The first step taken by the (first) Sub-Committee was to visit a number
of libraries, including that of the British Museum, the Bodleian Library,
Oxford, the University Library, Cambridge, the libraries of the Athenæum
Club, of the Patent Office and of the Chemical Society, also the valuable
private library of Mr. Huth....</p>
<p>“As regards the common belief that modern binding leather does decay
prematurely, the Sub-Committee satisfied themselves that books bound
during the last eighty or hundred years showed far greater evidence of
deterioration than those of an earlier date. Many recent bindings showed
evidence of decay after so short a period as ten, or even five years. The
Sub-Committee came to the conclusion that there is ample justification for
the general complaint that modern leather is not so durable as that
formerly used. To fix the date of the commencement of this deterioration
was a difficult matter; but they came to the conclusion that while
leather<!--132.png--><span class="pagenum">91</span>
of all periods showed some signs of decay, the deterioration becomes more
general on books bound after 1830, while some leathers seem to be
generally good until about 1860, after which date nearly all leathers seem
to get worse. The deterioration of calf bindings at the latter end of the
nineteenth century may be attributed as much to the excessive thinness as
to the poor quality of the material.</p>
<p>“With regard to the conditions under which books are kept, ventilation,
lighting, heating, etc., the Committee were satisfied that in libraries
where there was no artificial light used, and where the ventilation was
good, the bindings were generally in a better state than elsewhere. Where
gas is used the bindings are in the worst state noticed, especially on the
higher shelves.... Daylight and still more direct sunlight, has a
disintegrating effect on leather....</p>
<p>“As to the suitability of various leathers, the Sub-Committee came to the
conclusion that of the old leathers (fifteenth and sixteenth century),
white pigskin, probably alum tanned, is the most durable, but its
excessive hardness and want of flexibility renders this leather unsuitable
for most modern work. Old brown calf has lasted fairly well, but loses its
flexibility, and becomes stiff and brittle when exposed to light and air.
Some of the white tawed skins of the fifteenth and sixteenth century,
other than white pigskin, and probably deerskin, have lasted very well.
Some fifteenth and sixteenth century sheepskin bindings have remained soft
and flexible, but the surface is soft and usually much damaged by
friction. Vellum seems to have lasted fairly well, but is easily
influenced by atmospheric changes, and is much affected by light. Early
specimens of red morocco from the sixteenth to the end of the eighteenth
century were found in good condition, and of all the leathers noticed,
this seems to be the least affected by the various conditions to which it
had been subjected. In the opinion of the Committee, most of this leather
has been tanned with sumach or some closely allied tanning material.
Morocco bindings earlier than 1860 were generally found to be in fairly
good condition, but morocco after that date seems to be much less
reliable, and in many cases has become utterly rotten. During the latter
part of the eighteenth century it became customary to pare down calf until
it was as thin as paper. Since about 1830 hardly any really sound calf
seems<!--133.png--><span class="pagenum">92</span>
to have been used, as, whether thick or thin, it appears generally
to have perished. Sheepskin bindings of the early part of the century are
many of them still in good condition. Since about 1860 sheepskin as
sheepskin is hardly to be found. Sheepskins are grained in imitation of
other leathers and these imitation-grained leathers are generally found to
be in a worse condition than any of the other bindings, except, perhaps,
some of the very thin calf skin. Undyed modern pigskin seems to last well,
but some coloured pigskin bindings had entirely perished. Modern leathers
dyed with the aid of sulphuric acid are all to be condemned. In nearly
every case Russia leather was found to have become rotten, at least in
bindings of the last fifty years....</p>
<p>“The work of the second Sub-Committee, which was composed of chemists
specially conversant with the treatment of leather, was directed specially
to the elucidation of the following points; an investigation of the nature
of the decay of leather used for bookbinding; an examination of the causes
which produced this decay; a research into the best methods of preparing
leather for bookbinding; and a consideration of the points required to be
dealt with in the preservation of books....</p>
<p>“The Sub-Committee made a number of tests and analyses of samples of
decayed leather bookbindings, as well as of leathers used for binding. The
Committee found that the most prevalent decay was what they termed a red
decay, and this they think may be differentiated into old and new, the old
red decay being noticeable up to about 1830, and the new decay since that
date. In the old decay the leather becomes hard and brittle, the surface
not being easily abraded by friction. The older form is specially noticed
in calf-bound books, tanned presumably with oak bark. The new form affects
nearly all leathers, and, in extreme cases, seems absolutely to destroy
the fibres. Another form of deterioration, more noticeable in the newer
books, renders the grain of the leather liable to peel off when exposed to
the slightest friction. This is the most common form of decay noted in the
most recent leathers. In nearly all samples of Russia leather, a very
violent form of red decay was noticed. In many cases the leather was found
to be absolutely rotten in all parts exposed to light and air....</p>
<p>“An extensive series of experiments was carried out with
a<!--134.png--><span class="pagenum">93</span>
view of
determining the causes of the decay of bindings. The Sub-Committee find
that this is caused by both mechanical and by chemical influences. Of the
latter some are due to the mistakes of the leather manufacturer and the
bookbinder, others to the want of ventilation, and to improper heating and
lighting of libraries. In some cases inferior leathers are finished (by
methods in themselves injurious) so as to imitate the better class
leathers, and of course, where these are used, durability cannot be
expected. But in the main, the injury for which the manufacturer and the
bookbinder are responsible must be attributed rather to ignorance of the
effect of the means employed to give the leather the outward qualities
required for binding, than to the intentional production of an inferior
article....</p>
<hr class="tb" />
<p>“We are of opinion that no special skin can be condemned in its original
condition, although goat, seal, pig, and calf are probably superior in
strength of texture to sheep. Sheepskins are, however, equally resistant
to chemical agencies, and being naturally soft and flexible, are extremely
suitable for use for purposes where they are not much exposed to
mechanical wear.</p>
<p>“Fresh market skins, dry skins, or wet salted skins are much to be
preferred to those known as ‘drysalted,’ since the crystallization of the
salt which takes place in the drysalting process, tends to weaken the
structural fibre of the pelt. No tainted or putrefied skins, even if only
slightly affected, are suitable for the manufacture of bookbinding
leather, both for the same reason, and because the weakness of grain so
produced leads to uneven dyeing.</p>
<p>“In the soaking of skins we would strongly condemn the use of old putrid
soaks, or the addition of salt to the soaks to assist in the softening, as
both methods weaken the skin. ... Violent mechanical treatment such as
‘stocking’ is injurious....</p>
<p>“The liming should be done in mellow, weak limes. Old limes smelling
strongly of ammonia, and containing large quantities of bacteriological
products, must be avoided....</p>
<p>“Special care should be taken with regard to the beamhouse work after
unhairing and fleshing, as, by excessive or unsound puering and drenching
of the skins, their
whole<!--135.png--><span class="pagenum">94</span>
natural strength is frequently destroyed....
Great damage is frequently caused by the use of foul puers or foul bates,
in which putrefaction has taken place.</p>
<p>“Pure sumach is the tannage we would most strongly recommend for high
class bookbinding....</p>
<p>“The tannage of bookbinding leathers must be a mellow one, and must not be
carried too far, as we have found in many cases the cause of decay in
tanned leather has been the fact that the leather was overloaded with
tannin. Tanning has throughout a hardening effect on the leather fibre,
which, if pushed too far, ends in brittleness and loss of tenacity....</p>
<p>“We must absolutely condemn the use of any but mild vegetable acids in
souring or scouring the leather, or in the dye bath, and as far as
possible would avoid the use of acids and alkalis on tanned leather, both
being equally injurious.</p>
<p>“It has been shown by careful experiment, that even a minute quantity of
sulphuric acid used in the dye bath to liberate the colour, is at once
absorbed by the leather, and that no amount of subsequent washing will
remove it. In a very large proportion of cases, the decay of modern
sumach-tanned leather has been due to the sulphuric acid used in the dye
bath, and retained in the skin....</p>
<p>“We ... advise that the glazing of skins by friction in a damp ‘seasoned’
condition should be avoided.</p>
<p>“The use of nitric acid as a preparation for glazing is absolutely
destructive....</p>
<p>“The use of oxalic acid for washing backs of books, or of leather for
bookbinding, is fatal to their durability....</p>
<p>“The sprinkling of leather with ferrous sulphate (green vitriol), either
for the production of ‘sprinkled’ calf or ‘tree’ calf, must be most
strongly condemned, as the iron combines with and destroys the tan in the
leather, and free sulphuric acid is liberated which is still more
destructive....</p>
<p>“The stretching of leather tightly over books in a wet condition ...
should be strongly condemned....</p>
<p>“It is shown conclusively that the catechol tannins, which include turwar,
quebracho, hemlock and larch barks, and gambier, are unsuitable for
bookbinding leathers where durability is expected, and that sumach yields
a much more permanent leather, while myrobalans occupy an intermediate
place, but nearly approaching sumach. It is
unfortunate<!--136.png--><span class="pagenum"><a name="Page_95" id="Page_95">95</a></span>
that cassia bark,
which is the tanning material employed for East Indian sheep and goat
skins, should have proved so unreliable, since these leathers have been
largely used in bookbinding without suspicion, and are in other respects a
cheap and good article. With regard to sumach leathers themselves, it is
possible that some of the darkening noticed may be due to the presence of
adulterants, such as pistacia leaves, in the sumach used, as it is almost
impracticable to obtain absolutely pure sumach, and the pistacia tannin is
allied to that of the cassia.</p>
<p>“Of all the influences to which books are exposed in libraries, gas
fumes—no doubt because of the sulphuric and sulphurous acid which they
contain—are shown to be the most injurious, but light and especially
direct sunlight and hot air, are shown to possess deleterious influences
which had scarcely been suspected previously, and the importance of
moderate temperature and thorough ventilation of libraries cannot be too
much insisted on.”</p>
<hr class="chap" />
<!--137.png-->
<p><span class="pagenum"><a name="Page_96" id="Page_96">96</a></span></p>
<h2>INDEX</h2>
<dl class="index">
<dt>Absorbent leather: colouring, <a href="#Page_69">69</a></dt>
<dt>Acid</dt>
<dd>: hydrochloric, <a href="#Page_30">30</a>, <a href="#Page_66">66</a>, <a href="#Page_71">71</a></dd>
<dd>: muriatic, <a href="#Page_71">71</a></dd>
<dd>: nitric, <a href="#Page_71">71</a></dd>
<dd>: oxalic, <a href="#Page_71">71</a></dd>
<dd>: picric, <a href="#Page_66">66</a>, <a href="#Page_67">67</a>, <a href="#Page_68">68</a></dd>
<dd>: sulphuric, <a href="#Page_71">71</a></dd>
<dt>Acids, <a href="#Page_66">66</a></dt>
<dd>as decolorants, <a href="#Page_71">71</a></dd>
<dd>: diluting, <a href="#Page_71">71</a></dd>
<dd>: effect of, on steel tools, <a href="#Page_30">30</a></dd>
<dd>: injurious effect of, on leather, <a href="#Page_72">72</a></dd>
<dt>Alberti: L. B., author of <i>De Pictura</i>, <a href="#Page_87">87</a></dt>
<dt>Albumen: colours based on, <a href="#Page_67">67</a></dt>
<dt>Alizarin, <a href="#Page_66">66</a>, <a href="#Page_67">67</a></dt>
<dt>Alkalis, <a href="#Page_66">66</a></dt>
<dt>Aniline dyes: stability of, <a href="#Page_64">64</a></dt>
<dt>Apparatus for pyrogravure, <a href="#Page_36">36</a>-<a href="#Page_37">37</a></dt>
<dt>Archil, <a href="#Page_66">66</a></dt>
<dt>Arnotto, <a href="#Page_66">66</a></dt>
<dt>Aumaître: Mons. E., <a href="#Page_38">38</a>, <a href="#Page_42">42</a>, <a href="#Page_52">52</a>, <a href="#Page_59">59</a></dt>
<dt> </dt>
<dt>Baryta: chromate of, <a href="#Page_66">66</a></dt>
<dt>Bed-furniture: leather, <a href="#Page_84">84</a></dt>
<dt>Belleville: Mons., author of <i>Le cuir dans la Décoration Moderne</i>, <a href="#Page_62">62</a>, <a href="#Page_71">71</a></dt>
<dt>Bénard: Pierre, author, <a href="#Page_84">84</a></dt>
<dt>Bérain: leather decorated in style of, <a href="#Page_84">84</a></dt>
<dt>Blacks, <a href="#Page_66">66</a></dt>
<dt>Blues, <a href="#Page_67">67</a>, <a href="#Page_74">74</a></dt>
<dt>Bookbinding</dt>
<dd>: carved leather, <a href="#Page_14">14</a></dd>
<dd>: choice of design for, <a href="#Page_77">77</a></dd>
<dd>: crushed morocco for, <a href="#Page_17">17</a></dd>
<dd>: first use of leather for, <a href="#Page_14">14</a></dd>
<dd>: gold-tooled leather, <a href="#Page_14">14</a></dd>
<dd>: mosaic leather, <a href="#Page_14">14</a></dd>
<dd>: pigskin in, <a href="#Page_17">17</a>-<a href="#Page_18">18</a></dd>
<dd>: report of Committee on leather for, <a href="#Page_90">90</a>-<a href="#Page_95">95</a></dd>
<dd>: vellum in, <a href="#Page_18">18</a></dd>
<dt>Boudaroy: Fougeroux de</dt>
<dd>: remarks on leather hangings, <a href="#Page_84">84</a>-<a href="#Page_86">86</a></dd>
<dd>: recipe for golden varnish, <a href="#Page_86">86</a>-<a href="#Page_87">87</a></dd>
<dt>Bronzes, <a href="#Page_35">35</a>, <a href="#Page_68">68</a>, <a href="#Page_73">73</a>, <a href="#Page_74">74</a>, <a href="#Page_78">78</a></dt>
<dt>Browns, <a href="#Page_65">65</a></dt>
<dt>Brush</dt>
<dd>: couch-grass, <a href="#Page_70">70</a></dd>
<dd>: flannel, for rubbing leather, <a href="#Page_73">73</a></dd>
<dd>for gold leaf, <a href="#Page_74">74</a></dd>
<dd>for powder colours, <a href="#Page_74">74</a></dd>
<dd>for sprinkling, <a href="#Page_70">70</a></dd>
<dd>for stencilling, <a href="#Page_72">72</a></dd>
<dd>for tree marbling, <a href="#Page_70">70</a></dd>
<dt>Buckthorn berries, <a href="#Page_67">67</a></dt>
<dt>Burgundy: leather decoration in, <a href="#Page_14">14</a></dt>
<dt>Burnishers, <a href="#Page_63">63</a>, <a href="#Page_75">75</a></dt>
<dt> </dt>
<dt>Calf leather, <a href="#Page_16">16</a></dt>
<dd>: characteristics and methods of decorating, <a href="#Page_17">17</a></dd>
<dd>: colouring, <a href="#Page_69">69</a>, <a href="#Page_72">72</a></dd>
<dd>for modelling, <a href="#Page_29">29</a></dd>
<dd>for mosaic, <a href="#Page_43">43</a>, <a href="#Page_56">56</a></dd>
<dd>: monochrome mosaic on,
45<!--138.png--><span class="pagenum">97</span></dd>
<dt>Canson paper, <a href="#Page_45">45</a>, <a href="#Page_58">58</a></dt>
<dt>Cape morocco, <a href="#Page_17">17</a>, <a href="#Page_42">42</a>, <a href="#Page_78">78</a></dt>
<dt>Cardboard</dt>
<dd>for use in cutting out inlay, <a href="#Page_48">48</a></dd>
<dd>padding, <a href="#Page_34">34</a></dd>
<dt>Carpets: leather, <a href="#Page_81">81</a></dt>
<dt>Carthamine, <a href="#Page_66">66</a></dt>
<dt>Carthamus Tinctorius, <a href="#Page_66">66</a></dt>
<dt>Carton Jacquart, <a href="#Page_45">45</a>, <a href="#Page_51">51</a></dt>
<dt>Carved leather, <a href="#Page_16">16</a>, <a href="#Page_27">27</a>-<a href="#Page_28">28</a></dt>
<dd>bookbinding, <a href="#Page_14">14</a></dd>
<dd>: choice of design for, <a href="#Page_27">27</a></dd>
<dd>: gold on, <a href="#Page_27">27</a></dd>
<dd>in Dijon Museum, <a href="#Page_14">14</a>, <a href="#Page_27">27</a></dd>
<dt>Carving</dt>
<dd>: leather for, <a href="#Page_17">17</a></dd>
<dd>mosaic in relief, <a href="#Page_61">61</a>, <a href="#Page_62">62</a></dd>
<dd>: tools for, <a href="#Page_27">27</a></dd>
<dt>Cassaigre tannin, <a href="#Page_16">16</a></dt>
<dt>Catechol, <a href="#Page_65">65</a></dt>
<dt>Cathedral style, <a href="#Page_27">27</a></dt>
<dt>Chairs: leather, <a href="#Page_84">84</a></dt>
<dt>Chamois leather, <a href="#Page_16">16</a></dt>
<dd>: use and methods of decorating, <a href="#Page_18">18</a></dd>
<dt>Chestnut tannin, <a href="#Page_16">16</a></dt>
<dt>Chinese vermilion, <a href="#Page_74">74</a></dt>
<dt>Choice of design and colour, <a href="#Page_76">76</a>-<a href="#Page_79">79</a></dt>
<dt>Choice of skins, <a href="#Page_15">15</a>-<a href="#Page_18">18</a></dt>
<dt>Chromate of baryta, <a href="#Page_66">66</a></dt>
<dt>Chromate of zinc, <a href="#Page_66">66</a></dt>
<dt>Coal-tar, <a href="#Page_66">66</a></dt>
<dt>Cochineal, <a href="#Page_66">66</a></dt>
<dt>Coffers: leather, <a href="#Page_77">77</a>-<a href="#Page_79">79</a>, <a href="#Page_82">82</a></dt>
<dd>: choice of design for, <a href="#Page_78">78</a></dd>
<dd>: mosaic for, <a href="#Page_78">78</a></dd>
<dd>: mounting leather for, <a href="#Page_78">78</a></dd>
<dd>: outlining design for, <a href="#Page_78">78</a></dd>
<dd>: padding relief for, <a href="#Page_78">78</a></dd>
<dd>: punched groundwork for, <a href="#Page_78">78</a></dd>
<dt>Colour</dt>
<dd>: applying, to leather, <a href="#Page_68">68</a>-<a href="#Page_69">69</a></dd>
<dd>: choice of design and, <a href="#Page_76">76</a>-<a href="#Page_79">79</a></dd>
<dd>: combination of, <a href="#Page_76">76</a>-<a href="#Page_77">77</a></dd>
<dd>: for groundwork, <a href="#Page_68">68</a>, <a href="#Page_77">77</a></dd>
<dd>: influence of light on, of leather, <a href="#Page_16">16</a>, <a href="#Page_64">64</a></dd>
<dd>: influence of tanning process on, of leather, <a href="#Page_15">15</a>-<a href="#Page_16">16</a>, <a href="#Page_64">64</a></dd>
<dd>: introduction of, into decoration of leather hangings, <a href="#Page_81">81</a></dd>
<dt>Colouring</dt>
<dd>absorbent leather, <a href="#Page_69">69</a></dd>
<dd>calf leather, <a href="#Page_69">69</a>, <a href="#Page_72">72</a></dd>
<dd>cut leather, <a href="#Page_26">26</a>-<a href="#Page_27">27</a></dd>
<dd>hollows of cut and punched leather, <a href="#Page_27">27</a>, <a href="#Page_35">35</a>, <a href="#Page_65">65</a>, <a href="#Page_68">68</a>, <a href="#Page_73">73</a>-<a href="#Page_74">74</a>, <a href="#Page_78">78</a></dd>
<dd>: leather for, <a href="#Page_69">69</a></dd>
<dd>leather for mosaic, <a href="#Page_42">42</a>, <a href="#Page_69">69</a></dd>
<dd>leather: methods of, <a href="#Page_68">68</a>-<a href="#Page_75">75</a></dd>
<dd>modelled leather, <a href="#Page_71">71</a>-<a href="#Page_72">72</a></dd>
<dd>monochrome mosaic on calf, <a href="#Page_45">45</a></dd>
<dd>morocco leather, <a href="#Page_69">69</a></dd>
<dd>mosaic in relief, <a href="#Page_62">62</a></dd>
<dd>oxhide, <a href="#Page_69">69</a></dd>
<dd>pigskin, <a href="#Page_69">69</a></dd>
<dd>sheepskin, <a href="#Page_16">16</a></dd>
<dd>split sheepskins, <a href="#Page_69">69</a></dd>
<dd>tinfoil to give it the appearance of being gilt, <a href="#Page_89">89</a></dd>
<dt>Colours</dt>
<dd>based on albumen, <a href="#Page_67">67</a></dd>
<dd>based on glycerine, <a href="#Page_67">67</a></dd>
<dd>for leather work, <a href="#Page_64">64</a>-<a href="#Page_68">68</a></dd>
<dd>for stencilling, <a href="#Page_72">72</a></dd>
<dd>: oil, <a href="#Page_67">67</a>, <a href="#Page_83">83</a></dd>
<dd>: powder, used with varnish, <a href="#Page_73">73</a>-<a href="#Page_74">74</a></dd>
<dd>: spirit, <a href="#Page_67">67</a></dd>
<dd>: water, <a href="#Page_67">67</a></dd>
<dt>Composition of ornament, <a href="#Page_77">77</a>-<a href="#Page_79">79</a></dt>
<dt>Copper nails: leather ornamented with, <a href="#Page_84">84</a></dt>
<dt>Copper-plate etching on leather, <a href="#Page_39">39</a></dt>
<dt>Cordouans, <a href="#Page_80">80</a></dt>
<dt>Cordwainer, <a href="#Page_14">14</a></dt>
<dt>Cork padding, <a href="#Page_34">34</a></dt>
<dt>Cotton cord padding, <a href="#Page_34">34</a></dt>
<dt>Couch-grass whisk, <a href="#Page_70">70</a></dt>
<dt>Cowhide, <a href="#Page_16">16</a></dt>
<dd>: characteristics and methods of decorating, <a href="#Page_17">17</a></dd>
<dd>for mosaic in relief, <a href="#Page_61">61</a></dd>
<dt>Cuir bouilli, <a href="#Page_28">28</a></dt>
<dt>Cushion for gold leaf, <a href="#Page_74">74</a></dt>
<dt>Cut leather, <a href="#Page_16">16</a>, <a href="#Page_25">25</a>-<a href="#Page_27">27</a></dt>
<dd>: colouring, <a href="#Page_26">26</a>-<a href="#Page_27">27</a></dd>
<dd>: colouring hollows of, 27 <a href="#Page_68">68</a>, <a href="#Page_73">73</a>-<a
href="#Page_74">74</a><!--139.png--><span class="pagenum">98</span></dd>
<dd>: opening the outline of, <a href="#Page_23">23</a>, <a href="#Page_25">25</a>-<a href="#Page_26">26</a></dd>
<dt>Cutting</dt>
<dd>: leather for, <a href="#Page_17">17</a></dd>
<dd>stamped leather, <a href="#Page_39">39</a></dd>
<dt>Cutting out</dt>
<dd>incrusted mosaic, <a href="#Page_62">62</a>-<a href="#Page_63">63</a></dd>
<dd>inlay: cardboard for use in, <a href="#Page_48">48</a></dd>
<dd>inlay for mosaic, <a href="#Page_46">46</a>-<a href="#Page_49">49</a></dd>
<dd>inlay for mosaic in relief, <a href="#Page_61">61</a></dd>
<dd>inlay for polychrome mosaic, <a href="#Page_58">58</a>-<a href="#Page_59">59</a></dd>
<dd>open-work leather, <a href="#Page_40">40</a></dd>
<dt>Cutting-out knives, <a href="#Page_40">40</a>, <a href="#Page_46">46</a>-<a href="#Page_48">48</a></dt>
<dt> </dt>
<dt>Damping leather, <a href="#Page_19">19</a>-<a href="#Page_20">20</a></dt>
<dt>Decolorants, <a href="#Page_70">70</a>-<a href="#Page_71">71</a>, <a href="#Page_76">76</a></dt>
<dd>on modelled leather, <a href="#Page_71">71</a>-<a href="#Page_72">72</a></dd>
<dd>: tracing design for, <a href="#Page_71">71</a></dd>
<dt>Design</dt>
<dd>based on chestnut tree, <a href="#Page_76">76</a></dd>
<dd>based on sea subjects, <a href="#Page_76">76</a></dd>
<dd>: detached portions of leather in, <a href="#Page_77">77</a></dd>
<dd>: choice of, for bookbinding, <a href="#Page_77">77</a></dd>
<dd>: choice of, for carved leather, <a href="#Page_27">27</a></dd>
<dd>: choice of, for coffers, <a href="#Page_77">77</a></dd>
<dd>: choice of, for large surfaces, <a href="#Page_79">79</a></dd>
<dd>: choice of, for marbled leather, <a href="#Page_77">77</a></dd>
<dd>: choice of, for modelled leather, <a href="#Page_77">77</a></dd>
<dd>in leather hangings and furniture, <a href="#Page_82">82</a>-<a href="#Page_84">84</a></dd>
<dd>: Japanese school of, <a href="#Page_79">79</a></dd>
<dd>: study of, <a href="#Page_79">79</a></dd>
<dt>Design and colour: choice of, <a href="#Page_76">76</a>-<a href="#Page_79">79</a></dt>
<dt>Dijon Museum: examples of carved leather in, <a href="#Page_14">14</a>, <a href="#Page_27">27</a></dt>
<dt>Dollage de gants padding, <a href="#Page_34">34</a></dt>
<dt>Dyes, <a href="#Page_64">64</a>-<a href="#Page_74">74</a></dt>
<dd>: aniline, stability of, <a href="#Page_64">64</a></dd>
<dd>: superposed, <a href="#Page_65">65</a>, <a href="#Page_68">68</a>, <a href="#Page_76">76</a></dd>
<dd>: uncertain effect of, on leather, <a href="#Page_77">77</a></dd>
<dd>: vegetable, stability of, <a href="#Page_64">64</a></dd>
<dt> </dt>
<dt>Embossed leather, <i>see</i> Modelled leather</dt>
<dt>Encaustic: rubbing leather with, <a href="#Page_65">65</a>, <a href="#Page_72">72</a>-<a href="#Page_73">73</a></dt>
<dt>England: manufacture of leather hangings and furniture in, <a href="#Page_83">83</a>, <a href="#Page_85">85</a></dt>
<dt>Engraved leather, <i>see</i> Cut leather</dt>
<dt>Europe: introduction of decorated leather into, <a href="#Page_13">13</a>, <a href="#Page_14">14</a>, <a href="#Page_80">80</a></dt>
<dt> </dt>
<dt>Flanders: manufacture of leather hangings and furniture in, <a href="#Page_83">83</a>, <a href="#Page_85">85</a></dt>
<dt>France</dt>
<dd>: introduction of gilt or silvered leather hangings into, <a href="#Page_85">85</a></dd>
<dd>: manufacture of leather hangings and furniture in, <a href="#Page_85">85</a></dd>
<dd>: popularity of leather hangings and furniture in, <a href="#Page_84">84</a></dd>
<dt> </dt>
<dt>Garlande: Jehan de, author, <a href="#Page_80">80</a></dt>
<dt>Germany: leather decoration in, <a href="#Page_14">14</a></dt>
<dt>Ghadames: leather industry at, <a href="#Page_80">80</a></dt>
<dt>Gilding, <a href="#Page_74">74</a>-<a href="#Page_75">75</a>, <a href="#Page_80">80</a>-<a href="#Page_81">81</a>, <a href="#Page_83">83</a>, <a href="#Page_86">86</a></dt>
<dd>: bookbinders’ tools for, <a href="#Page_75">75</a></dd>
<dd>: decline of art, <a href="#Page_84">84</a>-<a href="#Page_86">86</a></dd>
<dd>outline of incrusted mosaic, <a href="#Page_63">63</a></dd>
<dd>: process described by Theophilus, <a href="#Page_80">80</a>-<a href="#Page_81">81</a></dd>
<dt>Gilt leather chairs, <a href="#Page_84">84</a></dt>
<dt>Gilt or silvered leather hangings and furniture, <a href="#Page_84">84</a>, <a href="#Page_85">85</a>-<a href="#Page_86">86</a></dt>
<dt>Gilt panel for painting on, <a href="#Page_87">87</a>-<a href="#Page_88">88</a></dt>
<dt>Gloves for protecting hands from dyes, <a href="#Page_68">68</a></dt>
<dt>Glycerine</dt>
<dd>: colours based on, <a href="#Page_67">67</a></dd>
<dd>inks, <a href="#Page_72">72</a></dd>
<dt>Gobelin tapestries: leather hangings and furniture replaced by, <a href="#Page_84">84</a></dt>
<dt>Gold, <a href="#Page_68">68</a>, <a href="#Page_83">83</a></dt>
<dd>groundwork: origin of, <a href="#Page_87">87</a></dd>
<dd>leaf, <a href="#Page_28">28</a>, <a href="#Page_74">74</a>-<a href="#Page_75">75</a>,
83<!--140.png--><span class="pagenum">99</span></dd>
<dd>leaf: brush for, <a href="#Page_74">74</a></dd>
<dd>leaf: cushion for, <a href="#Page_74">74</a></dd>
<dd>leaf first employed on leather hangings and furniture, <a href="#Page_83">83</a></dd>
<dd>leaf: knife for, <a href="#Page_74">74</a></dd>
<dd>: liquid, <a href="#Page_75">75</a></dd>
<dd>on carved and embossed leather, <a href="#Page_27">27</a></dd>
<dd>powder, <a href="#Page_73">73</a>, <a href="#Page_74">74</a>, <a href="#Page_75">75</a></dd>
<dd>: punches used on, <a href="#Page_28">28</a>, <a href="#Page_75">75</a></dd>
<dd>: shell, <a href="#Page_28">28</a>, <a href="#Page_74">74</a>, <a href="#Page_75">75</a></dd>
<dd>: want of moderation in the use of, <a href="#Page_87">87</a></dd>
<dt>Golden varnish</dt>
<dd>: recipe for (Boudaroy), <a href="#Page_86">86</a>-<a href="#Page_87">87</a></dd>
<dd>: recipe for (Theophilus), <a href="#Page_88">88</a></dd>
<dt>Gold-tooled leather bookbinding, <a href="#Page_14">14</a></dt>
<dt>Gold-tooling, <a href="#Page_28">28</a>, <a href="#Page_74">74</a>-<a href="#Page_75">75</a></dt>
<dd>: powder for, <a href="#Page_74">74</a></dd>
<dt>Gouache, <a href="#Page_35">35</a>, <a href="#Page_68">68</a>, <a href="#Page_73">73</a>, <a href="#Page_74">74</a>, <a href="#Page_78">78</a></dt>
<dt>Grating: sprinkling, <a href="#Page_70">70</a></dt>
<dt>Greens, <a href="#Page_66">66</a>, <a href="#Page_67">67</a>, <a href="#Page_74">74</a></dt>
<dt>Greys, <a href="#Page_65">65</a></dt>
<dt> </dt>
<dt>Hammered leather, <a href="#Page_16">16</a>, <a href="#Page_28">28</a></dt>
<dt>Hammering: leather for, <a href="#Page_17">17</a></dt>
<dt>Hematoxylin, <a href="#Page_66">66</a></dt>
<dt>Heraldic decoration on leather, <a href="#Page_14">14</a>, <a href="#Page_83">83</a></dt>
<dt>Holland: manufacture of leather hangings in, <a href="#Page_85">85</a></dt>
<dt>Hydrochloric acid, <a href="#Page_30">30</a>, <a href="#Page_66">66</a>, <a href="#Page_71">71</a></dt>
<dt> </dt>
<dt>Incising, <a href="#Page_20">20</a>-<a href="#Page_24">24</a>, <a href="#Page_26">26</a></dt>
<dd>for inserted mosaic, <a href="#Page_60">60</a></dd>
<dd>for modelled leather, <a href="#Page_22">22</a>, <a href="#Page_30">30</a></dd>
<dd>knives, <a href="#Page_15">15</a>, <a href="#Page_20">20</a>-<a href="#Page_24">24</a></dd>
<dd>oxhide, <a href="#Page_22">22</a></dd>
<dd>slanting cut, <a href="#Page_23">23</a>, <a href="#Page_24">24</a></dd>
<dt>Indigo, <a href="#Page_67">67</a></dt>
<dt>Inks</dt>
<dd>containing nitrate of silver, <a href="#Page_72">72</a></dd>
<dd>for stamping leather, <a href="#Page_39">39</a></dd>
<dd>for stencilling, <a href="#Page_72">72</a></dd>
<dd>: glycerine, <a href="#Page_72">72</a></dd>
<dt>Inlaid leather, <i>see</i> Mosaic leather</dt>
<dt> </dt>
<dt>Japanese school of design, <a href="#Page_79">79</a></dt>
<dt> </dt>
<dt>Kip-skins, <a href="#Page_61">61</a></dt>
<dt>Knives</dt>
<dd>: cutting-out, <a href="#Page_40">40</a>, <a href="#Page_46">46</a>-<a href="#Page_48">48</a></dd>
<dd>: gold, <a href="#Page_74">74</a></dd>
<dd>: incising, <a href="#Page_15">15</a>, <a href="#Page_20">20</a>-<a href="#Page_24">24</a></dd>
<dd>: paring, <a href="#Page_43">43</a></dd>
<dd>: stencil-cutter’s, <a href="#Page_46">46</a>, <a href="#Page_61">61</a></dd>
<dt> </dt>
<dt>Leather</dt>
<dd>: absorbent quality of, <a href="#Page_64">64</a>-<a href="#Page_65">65</a></dd>
<dd>bed-furniture, <a href="#Page_84">84</a></dd>
<dd>carpets, <a href="#Page_81">81</a></dd>
<dd>chairs, <a href="#Page_84">84</a></dd>
<dd>coffers, <a href="#Page_77">77</a>-<a href="#Page_79">79</a>, <a href="#Page_82">82</a></dd>
<dd>decoration in Burgundy, <a href="#Page_14">14</a></dd>
<dd>decoration in dress, <a href="#Page_13">13</a></dd>
<dd>decoration in Germany, <a href="#Page_14">14</a></dd>
<dd>decoration in Spain, <a href="#Page_13">13</a>, <a href="#Page_14">14</a>, <a href="#Page_80">80</a></dd>
<dd>decoration in style of Bérain, <a href="#Page_84">84</a></dd>
<dd>decoration in the past, <a href="#Page_13">13</a>-<a href="#Page_14">14</a></dd>
<dd>decoration in war-like equipment, <a href="#Page_13">13</a></dd>
<dd>decoration: introduction into Europe, <a href="#Page_13">13</a>, <a href="#Page_14">14</a>, <a href="#Page_80">80</a></dd>
<dd>: first use of, for bookbinding, <a href="#Page_14">14</a></dd>
<dd>hangings and furniture, <a href="#Page_80">80</a>-<a href="#Page_89">89</a></dd>
<dd>: heraldic decoration on, <a href="#Page_14">14</a>, <a href="#Page_83">83</a></dd>
<dd>industry at Ghadames, <a href="#Page_80">80</a></dd>
<dd>: methods of working in, <a href="#Page_16">16</a>, <a href="#Page_19">19</a>-<a href="#Page_41">41</a></dd>
<dd>: report of Committee on, for bookbinding, <a href="#Page_90">90</a>-<a href="#Page_95">95</a></dd>
<dd>: Spanish, <a href="#Page_84">84</a></dd>
<dd>: varieties of, <a href="#Page_16">16</a></dd>
<dt>Light: influence of, on colour of leather, <a href="#Page_16">16</a>, <a href="#Page_64">64</a></dt>
<dt>Lignereux: Mons. de Saint André de, author of <i>Le Cuir d’Art français</i>, <a href="#Page_28">28</a></dt>
<dt>Lithographic stone, <a href="#Page_15">15</a>, <a href="#Page_44">44</a></dt>
<dt>Logwood, <a href="#Page_66">66</a></dt>
<dt>Lyons: manufacture of gilt or silvered leather hangings at, <a href="#Page_85">85</a></dt>
<dt> </dt>
<dt>Madder, <a href="#Page_66">66</a></dt>
<dt>Marble: slab of, <a href="#Page_15">15</a>, <a href="#Page_44">44</a></dt>
<dt>Marbled leather: choice of design for,
77<!--141.png--><span class="pagenum">100</span></dt>
<dt>Marbling, <a href="#Page_69">69</a>-<a href="#Page_70">70</a></dt>
<dd>: tree, <a href="#Page_70">70</a></dd>
<dt>Metal block for stamping leather, <a href="#Page_39">39</a></dt>
<dt>Metal ornaments on leather hangings, <a href="#Page_81">81</a></dt>
<dt>Metallic salts, <a href="#Page_66">66</a></dt>
<dt>Mimosa tannin, <a href="#Page_16">16</a></dt>
<dt>Modelled leather, <a href="#Page_16">16</a>, <a href="#Page_28">28</a>-<a href="#Page_36">36</a></dt>
<dd>: choice of design for, <a href="#Page_77">77</a></dd>
<dd>: colouring, <a href="#Page_71">71</a>-<a href="#Page_72">72</a></dd>
<dd>: decolorants on, <a href="#Page_71">71</a>-<a href="#Page_72">72</a></dd>
<dd>: incising for, <a href="#Page_22">22</a>, <a href="#Page_30">30</a></dd>
<dd>in hangings and furniture, <a href="#Page_83">83</a></dd>
<dd>: introduction into Venice, <a href="#Page_14">14</a></dd>
<dd>: opening the outline of, <a href="#Page_26">26</a>, <a href="#Page_29">29</a>, <a href="#Page_32">32</a>, <a href="#Page_33">33</a>-<a href="#Page_34">34</a></dd>
<dd>: softening the outline of, <a href="#Page_32">32</a>-<a href="#Page_33">33</a></dd>
<dd>with punched background, <a href="#Page_16">16</a>, <a href="#Page_28">28</a>, <a href="#Page_34">34</a>-<a href="#Page_36">36</a></dd>
<dt>Modellers, <a href="#Page_15">15</a>, <a href="#Page_29">29</a>, <a href="#Page_30">30</a>, <a href="#Page_38">38</a></dt>
<dt>Modelling, <a href="#Page_30">30</a>-<a href="#Page_34">34</a></dt>
<dd>: ball-shaped steel tool for, <a href="#Page_31">31</a>, <a href="#Page_32">32</a></dd>
<dd>: leather for, <a href="#Page_17">17</a>, <a href="#Page_29">29</a>, <a href="#Page_61">61</a></dd>
<dd>leather on plaster cast, <a href="#Page_39">39</a>-<a href="#Page_40">40</a></dd>
<dd>mosaic in relief, <a href="#Page_61">61</a></dd>
<dd>reed decoration, <a href="#Page_34">34</a></dd>
<dd>: sandbag for, <a href="#Page_32">32</a></dd>
<dd>stamped leather, <a href="#Page_39">39</a></dd>
<dd>: tools for, <a href="#Page_29">29</a>-<a href="#Page_32">32</a></dd>
<dd>: tracing design for, <a href="#Page_32">32</a>, <a href="#Page_33">33</a></dd>
<dd>: wax for, <a href="#Page_33">33</a>-<a href="#Page_34">34</a></dd>
<dt>Mordants, <a href="#Page_67">67</a></dt>
<dt>Morocco leather, <a href="#Page_16">16</a></dt>
<dd>: Cape, <a href="#Page_17">17</a>, <a href="#Page_42">42</a>, <a href="#Page_78">78</a></dd>
<dd>: characteristics and methods of decorating, <a href="#Page_17">17</a></dd>
<dd>: colouring, <a href="#Page_69">69</a></dd>
<dd>: crushed, <a href="#Page_17">17</a></dd>
<dd>for mosaic, <a href="#Page_42">42</a>, <a href="#Page_58">58</a>, <a href="#Page_59">59</a></dd>
<dd>: grain of, <a href="#Page_17">17</a></dd>
<dd>groundwork: pasting inlay on, <a href="#Page_59">59</a></dd>
<dd>groundwork: polychrome mosaic on, <a href="#Page_58">58</a>-<a href="#Page_59">59</a></dd>
<dd>groundwork: tool for sticking inlay on, <a href="#Page_59">59</a>, <a href="#Page_60">60</a></dd>
<dd>: paring, for inlay of polychrome mosaic, <a href="#Page_58">58</a>-<a href="#Page_59">59</a></dd>
<dd>: tanning materials used for, <a href="#Page_15">15</a></dd>
<dt>Mosaic, <a href="#Page_16">16</a>, <a href="#Page_42">42</a>-<a href="#Page_63">63</a></dt>
<dd>bookbinding, <a href="#Page_14">14</a></dd>
<dd>: calf leather for, <a href="#Page_43">43</a>, <a href="#Page_56">56</a></dd>
<dd>: colouring leather for, <a href="#Page_42">42</a>, <a href="#Page_69">69</a></dd>
<dd>: cutting out inlay for, <a href="#Page_46">46</a>-<a href="#Page_49">49</a></dd>
<dd>for coffers, <a href="#Page_78">78</a></dd>
<dd>: incrusted, <a href="#Page_62">62</a>-<a href="#Page_63">63</a></dd>
<dd>: incrusted, cutting out, <a href="#Page_62">62</a>-<a href="#Page_63">63</a></dd>
<dd>: incrusted, gilding outline of, <a href="#Page_63">63</a></dd>
<dd>: incrusted, outlining, <a href="#Page_63">63</a></dd>
<dd>: incrusted, tracing design for, <a href="#Page_62">62</a></dd>
<dd>in relief, <a href="#Page_61">61</a>-<a href="#Page_62">62</a></dd>
<dd>in relief: carving, <a href="#Page_61">61</a>, <a href="#Page_62">62</a></dd>
<dd>in relief: colouring, <a href="#Page_62">62</a></dd>
<dd>in relief: cowhide for, <a href="#Page_61">61</a></dd>
<dd>in relief: cutting out inlay for, <a href="#Page_61">61</a></dd>
<dd>in relief: depressing groundwork for inlay of, <a href="#Page_61">61</a></dd>
<dd>in relief: leather for, <a href="#Page_61">61</a></dd>
<dd>in relief: modelling, <a href="#Page_61">61</a></dd>
<dd>in relief: tracing design for, <a href="#Page_61">61</a></dd>
<dd>: inserted, <a href="#Page_59">59</a>-<a href="#Page_60">60</a></dd>
<dd>: inserted, incising leather for, <a href="#Page_60">60</a></dd>
<dd>: inserted, outlining, <a href="#Page_60">60</a></dd>
<dd>: leather for groundwork of, <a href="#Page_17">17</a>, <a href="#Page_42">42</a>-<a href="#Page_43">43</a></dd>
<dd>: leather for inlay of, <a href="#Page_45">45</a></dd>
<dd>: monochrome, on calf, <a href="#Page_45">45</a></dd>
<dd>: morocco leather as groundwork of, <a href="#Page_42">42</a>, <a href="#Page_58">58</a>, <a href="#Page_59">59</a></dd>
<dd>: mounting inlay on paper lining for, <a href="#Page_45">45</a>-<a href="#Page_46">46</a></dd>
<dd>on modelled leather, <a href="#Page_59">59</a></dd>
<dd>on modelled leather: paring leather for, <a href="#Page_59">59</a></dd>
<dd>: outlining, <a href="#Page_52">52</a>-<a href="#Page_56">56</a></dd>
<dd>: pasting inlay on groundwork for, <a href="#Page_49">49</a>-<a href="#Page_50">50</a>, <a href="#Page_59">59</a></dd>
<dd>: paring leather for, <a href="#Page_43">43</a>-<a href="#Page_44">44</a></dd>
<dd>: pincers for, <a href="#Page_50">50</a></dd>
<dd>: polishing, <a href="#Page_56">56</a>, <a href="#Page_57">57</a></dd>
<dd>: polychrome, <a
href="#Page_57">57</a>-59<!--142.png--><span class="pagenum">101</span></dd>
<dd>: polychrome, cutting out inlay for, <a href="#Page_58">58</a>-<a href="#Page_59">59</a></dd>
<dd>: polychrome, morocco leather as inlay for, <a href="#Page_58">58</a></dd>
<dd>: polychrome, on morocco groundwork, <a href="#Page_58">58</a>-<a href="#Page_59">59</a></dd>
<dd>: polychrome, outlining, <a href="#Page_59">59</a></dd>
<dd>: polychrome, paring morocco leather for inlay of, <a href="#Page_58">58</a>-<a href="#Page_59">59</a></dd>
<dd>: polychrome, split sheepskins for, <a href="#Page_58">58</a></dd>
<dd>: polychrome, stencil for marking out, <a href="#Page_58">58</a></dd>
<dd>: polychrome, tracing design for, <a href="#Page_57">57</a>-<a href="#Page_58">58</a></dd>
<dd>: preparation of leather for groundwork of, <a href="#Page_43">43</a>-<a href="#Page_45">45</a></dd>
<dd>: removing paper lining from inlay of, <a href="#Page_52">52</a></dd>
<dd>: roller for, <a href="#Page_50">50</a>, <a href="#Page_51">51</a></dd>
<dd>: setting in the inlay of, <a href="#Page_50">50</a>-<a href="#Page_52">52</a></dd>
<dd>: tracing design for, <a href="#Page_46">46</a></dd>
<dt>Mosaics of piqué leather, <a href="#Page_13">13</a></dt>
<dt>Mosaïque par incrustation, <i>see</i> Incrusted mosaic</dt>
<dt>Muriatic acid, <a href="#Page_71">71</a></dt>
<dt> </dt>
<dt>Nitrate of silver: inks containing, <a href="#Page_72">72</a></dt>
<dt>Nitric acid, <a href="#Page_71">71</a></dt>
<dt> </dt>
<dt>Oak tannin, <a href="#Page_15">15</a>, <a href="#Page_16">16</a></dt>
<dt>Oil colours, <a href="#Page_67">67</a>, <a href="#Page_83">83</a></dt>
<dt>Openers, <a href="#Page_15">15</a>, <a href="#Page_23">23</a>, <a href="#Page_25">25</a>-<a href="#Page_26">26</a></dt>
<dt>Opening the outline</dt>
<dd>of cut leather, <a href="#Page_23">23</a>, <a href="#Page_25">25</a>-<a href="#Page_26">26</a></dd>
<dd>of modelled leather, <a href="#Page_26">26</a>, <a href="#Page_29">29</a>, <a href="#Page_32">32</a>, <a href="#Page_33">33</a>-<a href="#Page_34">34</a></dd>
<dt>Open-work leather, <a href="#Page_16">16</a>, <a href="#Page_18">18</a>, <a href="#Page_40">40</a>, <a href="#Page_41">41</a></dt>
<dd>: cutting out, <a href="#Page_40">40</a></dd>
<dd>: groundwork for, <a href="#Page_18">18</a>, <a href="#Page_40">40</a>, <a href="#Page_41">41</a></dd>
<dd>hangings, <a href="#Page_40">40</a></dd>
<dd>in relief, <a href="#Page_40">40</a></dd>
<dd>: plaited ornament on borders of, <a href="#Page_40">40</a>-<a href="#Page_41">41</a></dd>
<dt>Or basané, <a href="#Page_83">83</a>, <a href="#Page_84">84</a></dt>
<dt>Outliners, <a href="#Page_52">52</a>-<a href="#Page_56">56</a></dt>
<dt>Outlining</dt>
<dd>design for coffers, <a href="#Page_78">78</a></dd>
<dd>incrusted mosaic, <a href="#Page_63">63</a></dd>
<dd>inserted mosaic, <a href="#Page_60">60</a></dd>
<dd>mosaic, <a href="#Page_52">52</a>-<a href="#Page_56">56</a></dd>
<dd>polychrome mosaic, <a href="#Page_59">59</a></dd>
<dt>Outlining-wheels, <a href="#Page_15">15</a>, <a href="#Page_35">35</a>, <a href="#Page_54">54</a>, <a href="#Page_56">56</a>, <a href="#Page_63">63</a></dt>
<dt>Oxalic acid, <a href="#Page_71">71</a></dt>
<dt>Oxhide, <a href="#Page_16">16</a></dt>
<dd>: characteristics and methods of decorating, <a href="#Page_17">17</a></dd>
<dd>: colouring, <a href="#Page_69">69</a></dd>
<dd>: incising, <a href="#Page_22">22</a></dd>
<dt> </dt>
<dt>Padding relief, <a href="#Page_34">34</a>, <a href="#Page_40">40</a></dt>
<dd>for coffers, <a href="#Page_78">78</a></dd>
<dt>Panel: gilt, for painting on, <a href="#Page_87">87</a>-<a href="#Page_88">88</a></dt>
<dt>Paring knives, <a href="#Page_43">43</a></dt>
<dt>Paring leather, <a href="#Page_43">43</a>-<a href="#Page_44">44</a></dt>
<dd>for inlay of polychrome mosaic, <a href="#Page_58">58</a>-<a href="#Page_59">59</a></dd>
<dd>for mosaic on modelled leather, <a href="#Page_59">59</a></dd>
<dt>Paste: recipe for, for mounting leather on wooden panels (Theophilus), <a href="#Page_82">82</a></dt>
<dt>Patine, <a href="#Page_30">30</a>, <a href="#Page_64">64</a>, <a href="#Page_67">67</a>, <a href="#Page_72">72</a></dt>
<dt>Patines grasses, <a href="#Page_67">67</a></dt>
<dt>Pearl-ash, <a href="#Page_65">65</a></dt>
<dt>Pencils: 6H graphite, <a href="#Page_15">15</a>, <a href="#Page_20">20</a></dt>
<dt>Permanganate of potash, <a href="#Page_65">65</a></dt>
<dt>Pictures on leather, <a href="#Page_82">82</a>, <a href="#Page_84">84</a></dt>
<dt>Picric acid, <a href="#Page_66">66</a>, <a href="#Page_67">67</a>, <a href="#Page_68">68</a></dt>
<dt>Pied de biche, <a href="#Page_30">30</a></dt>
<dt>Pigskin, <a href="#Page_16">16</a></dt>
<dd>: characteristics and methods of decorating, <a href="#Page_17">17</a>-<a href="#Page_18">18</a></dd>
<dd>: colouring, <a href="#Page_69">69</a></dd>
<dd>: in bookbinding, <a href="#Page_17">17</a>-<a href="#Page_18">18</a></dd>
<dt>Pincers for mosaic, <a href="#Page_50">50</a></dt>
<dt>Pinks, <a href="#Page_66">66</a></dt>
<dt>Piqué leather: mosaics of, <a href="#Page_13">13</a></dt>
<dt>Plaited ornament on borders of open-work leather, <a href="#Page_40">40</a>-<a href="#Page_41">41</a></dt>
<dt>Plaster cast: modelling leather on, <a href="#Page_39">39</a>-<a href="#Page_40">40</a></dt>
<dt>Plaster casts for stamping leather, <a href="#Page_39">39</a></dt>
<dt>Plaster padding, <a href="#Page_40">40</a></dt>
<dt>Pointogravure, <a href="#Page_16">16</a>, <a href="#Page_38">38</a></dt>
<dd>: tools for,
38<!--143.png--><span class="pagenum">102</span></dd>
<dt>Polishing iron, <a href="#Page_56">56</a>, <a href="#Page_57">57</a></dt>
<dt>Polishing mosaic, <a href="#Page_56">56</a>, <a href="#Page_57">57</a></dt>
<dt>Pompon, <a href="#Page_72">72</a></dt>
<dt>Portugal: manufacture of leather hangings and furniture in, <a href="#Page_83">83</a></dt>
<dt>Potash, <a href="#Page_65">65</a>, <a href="#Page_66">66</a>, <a href="#Page_68">68</a>, <a href="#Page_69">69</a>, <a href="#Page_73">73</a>, <a href="#Page_77">77</a></dt>
<dt>Potash-lye, <a href="#Page_65">65</a></dt>
<dt>Potassium, <a href="#Page_65">65</a></dt>
<dt>Powder colours,</dt>
<dd>: brush for, <a href="#Page_74">74</a></dd>
<dd>used with varnish, <a href="#Page_73">73</a>-<a href="#Page_74">74</a></dd>
<dt>Presses for stamping leather, <a href="#Page_38">38</a>, <a href="#Page_39">39</a></dt>
<dt>Pressing leather after pasting, <a href="#Page_45">45</a></dt>
<dt>Punched backgrounds, <i>see</i> Punched groundwork</dt>
<dt>Punched groundwork, <a href="#Page_16">16</a>, <a href="#Page_28">28</a>, <a href="#Page_34">34</a>-<a href="#Page_36">36</a></dt>
<dd>for coffers, <a href="#Page_78">78</a></dd>
<dd>in leather hangings and furniture, <a href="#Page_83">83</a></dd>
<dd>: modelled leather with, <a href="#Page_16">16</a>, <a href="#Page_28">28</a>, <a href="#Page_34">34</a>-<a href="#Page_36">36</a></dd>
<dt>Punched leather, <a href="#Page_16">16</a>, <a href="#Page_28">28</a></dt>
<dd>: colouring hollows of, <a href="#Page_35">35</a>, <a href="#Page_65">65</a>, <a href="#Page_68">68</a>, <a href="#Page_73">73</a>-<a href="#Page_74">74</a>, <a href="#Page_78">78</a></dd>
<dt>Punches, <a href="#Page_15">15</a>, <a href="#Page_28">28</a>, <a href="#Page_35">35</a>, <a href="#Page_78">78</a>, <a href="#Page_83">83</a></dt>
<dd>: patterns produced with, <a href="#Page_35">35</a></dd>
<dd>used on gold, <a href="#Page_28">28</a>, <a href="#Page_75">75</a></dd>
<dt>Pyrogravure, <a href="#Page_16">16</a>, <a href="#Page_27">27</a>, <a href="#Page_28">28</a>, <a href="#Page_36">36</a>-<a href="#Page_37">37</a></dt>
<dd>: apparatus for, <a href="#Page_36">36</a>-<a href="#Page_37">37</a></dd>
<dd>: leather for, <a href="#Page_17">17</a>, <a href="#Page_18">18</a></dd>
<dd>: outlining incrusted mosaic by, <a href="#Page_63">63</a></dd>
<dt> </dt>
<dt>Quercitron, <a href="#Page_66">66</a></dt>
<dt> </dt>
<dt>Réaumur: Mons. de, <a href="#Page_84">84</a>, <a href="#Page_86">86</a>, <a href="#Page_88">88</a></dt>
<dt>Red wood: extracts of, <a href="#Page_66">66</a></dt>
<dt>Reds, <a href="#Page_66">66</a></dt>
<dt>Reed decoration, <a href="#Page_34">34</a></dt>
<dd>: padding for, <a href="#Page_34">34</a></dd>
<dd>: tool for working, <a href="#Page_34">34</a></dd>
<dt>Reserved ornament, <a href="#Page_71">71</a>-<a href="#Page_72">72</a></dt>
<dd>: colour for groundwork of, <a href="#Page_77">77</a></dd>
<dt>Roller for mosaic, <a href="#Page_50">50</a>, <a href="#Page_51">51</a></dt>
<dt>Rubbing leather, <a href="#Page_36">36</a>, <a href="#Page_65">65</a>, <a href="#Page_67">67</a>, <a href="#Page_72">72</a>-<a href="#Page_74">74</a>, <a href="#Page_77">77</a></dt>
<dd>: flannel brush for, <a href="#Page_73">73</a></dd>
<dd>with encaustic, <a href="#Page_65">65</a>, <a href="#Page_72">72</a>-<a href="#Page_73">73</a></dd>
<dd>with varnish, <a href="#Page_72">72</a>-<a href="#Page_73">73</a></dd>
<dd>with wax, <a href="#Page_72">72</a>-<a href="#Page_73">73</a></dd>
<dt>Russia leather, <a href="#Page_16">16</a></dt>
<dd>: characteristics and methods of decorating, <a href="#Page_17">17</a></dd>
<dd>for modelling, <a href="#Page_29">29</a></dd>
<dt> </dt>
<dt>Saffron, <a href="#Page_66">66</a></dt>
<dt>Salts</dt>
<dd>: metallic, <a href="#Page_66">66</a></dd>
<dd>of tin, <a href="#Page_66">66</a></dd>
<dt>Sandbag for modelling, <a href="#Page_32">32</a></dt>
<dt>Scraper, <a href="#Page_46">46</a></dt>
<dt>Semis, <a href="#Page_35">35</a></dt>
<dt>Setting in the inlay of mosaic, <a href="#Page_50">50</a>-<a href="#Page_52">52</a></dt>
<dt>Shaded groundwork, <a href="#Page_42">42</a>, <a href="#Page_69">69</a></dt>
<dt>Sheepskin, <a href="#Page_16">16</a></dt>
<dd>: characteristics and methods of decorating, <a href="#Page_16">16</a>, <a href="#Page_17">17</a></dd>
<dd>: colouring, <a href="#Page_16">16</a></dd>
<dt>Shell gold, <a href="#Page_28">28</a>, <a href="#Page_74">74</a>, <a href="#Page_75">75</a></dt>
<dt>Shell silver, <a href="#Page_74">74</a></dt>
<dt>Silver</dt>
<dd>leaf, <a href="#Page_86">86</a></dd>
<dd>powder, <a href="#Page_74">74</a></dd>
<dd>: shell, <a href="#Page_74">74</a></dd>
<dd>: use of, on leather, <a href="#Page_83">83</a></dd>
<dt>Skins: choice of, <a href="#Page_15">15</a>-<a href="#Page_18">18</a></dt>
<dt>Soda, <a href="#Page_65">65</a></dt>
<dt>Spain</dt>
<dd>: leather decoration in, <a href="#Page_13">13</a>, <a href="#Page_14">14</a>, <a href="#Page_80">80</a></dd>
<dd>: manufacture of leather hangings and furniture in, <a href="#Page_83">83</a>, <a href="#Page_85">85</a></dd>
<dd>: introduction of leather hangings and furniture into, <a href="#Page_80">80</a></dd>
<dt>Spanish leather, <a href="#Page_84">84</a></dt>
<dt>Spirit colours, <a href="#Page_67">67</a></dt>
<dt>Split sheepskins</dt>
<dd>: colouring, <a href="#Page_69">69</a></dd>
<dd>for inlaying, <a href="#Page_45">45</a>, <a href="#Page_56">56</a></dd>
<dd>for polychrome mosaic, <a href="#Page_58">58</a></dd>
<dt>Sprinkling, <a href="#Page_70">70</a>-<a href="#Page_71">71</a></dt>
<dd>: brush for, <a href="#Page_70">70</a></dd>
<dd>: grating for, <a href="#Page_70">70</a></dd>
<dd>: preparation for reserving ornament during (Belleville), <a
href="#Page_71">71</a><!--144.png--><span class="pagenum">103</span></dd>
<dd>: tracing design for, <a href="#Page_71">71</a></dd>
<dd>: vaporiser for, <a href="#Page_71">71</a></dd>
<dt>Stamped leather, <a href="#Page_16">16</a>, <a href="#Page_38">38</a>-<a href="#Page_40">40</a></dt>
<dd>chairs, <a href="#Page_84">84</a></dd>
<dd>: cutting, <a href="#Page_39">39</a></dd>
<dd>in hangings and furniture, <a href="#Page_83">83</a>, <a href="#Page_84">84</a></dd>
<dd>: introduction into Venice, <a href="#Page_14">14</a></dd>
<dd>: modelling, <a href="#Page_39">39</a></dd>
<dt>Stamping leather, <a href="#Page_38">38</a>-<a href="#Page_40">40</a></dt>
<dd>: inks for, <a href="#Page_39">39</a></dd>
<dd>: presses for, <a href="#Page_38">38</a>, <a href="#Page_39">39</a></dd>
<dd>with copper-plate, <a href="#Page_39">39</a></dd>
<dd>with metal block, <a href="#Page_39">39</a></dd>
<dd>with plaster casts, <a href="#Page_39">39</a></dd>
<dd>with stencil, <a href="#Page_38">38</a></dd>
<dt>Stearine: plaster casts prepared with, <a href="#Page_39">39</a></dt>
<dt>Steel clamps for holding leather, <a href="#Page_31">31</a></dt>
<dt>Stencil-cutter’s knife, <a href="#Page_46">46</a>, <a href="#Page_61">61</a></dt>
<dt>Stencilling, <a href="#Page_72">72</a></dt>
<dd>: brush for, <a href="#Page_72">72</a></dd>
<dd>: inks for, <a href="#Page_72">72</a></dd>
<dd>: leather for, <a href="#Page_18">18</a></dd>
<dt>Stone: lithographic, <a href="#Page_15">15</a>, <a href="#Page_44">44</a></dt>
<dt>Study of design, <a href="#Page_79">79</a></dt>
<dt>Sulphate of iron, <a href="#Page_65">65</a>, <a href="#Page_67">67</a>, <a href="#Page_68">68</a>, <a href="#Page_69">69</a>, <a href="#Page_76">76</a></dt>
<dt>Sulphuric acid, <a href="#Page_71">71</a></dt>
<dt>Sumach tannin, <a href="#Page_15">15</a></dt>
<dt>Superposed dyes, <a href="#Page_65">65</a>, <a href="#Page_68">68</a>, <a href="#Page_76">76</a></dt>
<dt> </dt>
<dt>Tanning materials, <a href="#Page_15">15</a>, <a href="#Page_16">16</a></dt>
<dt>Tanning process, <a href="#Page_15">15</a></dt>
<dd>: influence of, on colour of leather, <a href="#Page_15">15</a>-<a href="#Page_16">16</a>, <a href="#Page_64">64</a></dd>
<dd>: leather prepared to receive dyes by the, <a href="#Page_67">67</a></dd>
<dt>Theophilus, author of <i>Diversarum Artium Schedula</i></dt>
<dd>: process of gilding described by, <a href="#Page_80">80</a>-<a href="#Page_81">81</a></dd>
<dd>: recipe for colouring tinfoil to give it the appearance of being gilt, <a href="#Page_89">89</a></dd>
<dd>: recipe for golden varnish, <a href="#Page_88">88</a></dd>
<dd>: recipe for paste for mounting leather on wooden panels, <a href="#Page_82">82</a></dd>
<dt>Tools, <a href="#Page_16">16</a></dt>
<dd>: bookbinders’, for gilding, <a href="#Page_75">75</a></dd>
<dd>: effect of acids on steel, <a href="#Page_30">30</a></dd>
<dd>for carving, <a href="#Page_27">27</a></dd>
<dd>for modelling, <a href="#Page_29">29</a>-<a href="#Page_32">32</a></dd>
<dd>for pointogravure, <a href="#Page_38">38</a></dd>
<dd>for pyrogravure, <a href="#Page_36">36</a>-<a href="#Page_37">37</a></dd>
<dd>for sticking inlay on morocco groundwork, <a href="#Page_59">59</a>, <a href="#Page_60">60</a></dd>
<dd>for working reed decoration, <a href="#Page_34">34</a></dd>
<dt>Tracing design, <a href="#Page_19">19</a>-<a href="#Page_20">20</a></dt>
<dd>for decolorants, <a href="#Page_71">71</a></dd>
<dd>for incrusted mosaic, <a href="#Page_62">62</a></dd>
<dd>for modelling, <a href="#Page_32">32</a>, <a href="#Page_33">33</a></dd>
<dd>for mosaic, <a href="#Page_46">46</a></dd>
<dd>for mosaic in relief, <a href="#Page_61">61</a></dd>
<dd>for polychrome mosaic, <a href="#Page_57">57</a>-<a href="#Page_58">58</a></dd>
<dd>for sprinkling, <a href="#Page_71">71</a></dd>
<dd>on flesh side of leather, <a href="#Page_32">32</a>, <a href="#Page_33">33</a></dd>
<dt>Tracing-point, <a href="#Page_15">15</a>, <a href="#Page_20">20</a></dt>
<dt>Tree marbling, <a href="#Page_70">70</a></dt>
<dd>: brush for, <a href="#Page_70">70</a></dd>
<dt>Turmeric, <a href="#Page_66">66</a></dt>
<dt> </dt>
<dt>Van Orley, painter, <a href="#Page_83">83</a>, <a href="#Page_87">87</a>-<a href="#Page_88">88</a></dt>
<dt>Vaporiser for sprinkling, <a href="#Page_71">71</a></dt>
<dt>Varnish</dt>
<dd>: recipe for golden (Boudaroy), <a href="#Page_86">86</a>-<a href="#Page_87">87</a></dd>
<dd>: recipe for golden (Theophilus), <a href="#Page_88">88</a></dd>
<dd>: rubbing leather with, <a href="#Page_72">72</a>-<a href="#Page_73">73</a></dd>
<dd>: use of, with powder colours, <a href="#Page_73">73</a>-<a href="#Page_74">74</a></dd>
<dt>Vegetable dyes: stability of, <a href="#Page_64">64</a></dt>
<dt>Vellum, <a href="#Page_16">16</a></dt>
<dd>: characteristics and methods of decorating, <a href="#Page_18">18</a></dd>
<dd>in bookbinding, <a href="#Page_18">18</a></dd>
<dt>Venice</dt>
<dd>: introduction of modelled and stamped leather into, <a href="#Page_14">14</a></dd>
<dd>: manufacture of leather hangings and furniture in, <a href="#Page_83">83</a>, <a href="#Page_85">85</a></dd>
<dt>Vermilion: Chinese, <a href="#Page_74">74</a></dt>
<dt> </dt>
<dt>Water-colours,
67<!--145.png--><span class="pagenum">104</span></dt>
<dt>Wax</dt>
<dd>for modelling, <a href="#Page_33">33</a>-<a href="#Page_34">34</a></dd>
<dd>padding, <a href="#Page_34">34</a></dd>
<dd>: rubbing leather with, <a href="#Page_72">72</a>-<a href="#Page_73">73</a></dd>
<dt>Wheels</dt>
<dd>: outlining, <a href="#Page_15">15</a>, <a href="#Page_35">35</a>, <a href="#Page_54">54</a>, <a href="#Page_56">56</a>, <a href="#Page_63">63</a></dd>
<dd>: patterns produced with, <a href="#Page_35">35</a></dd>
<dt> </dt>
<dt>Xanthin, <a href="#Page_65">65</a></dt>
<dt> </dt>
<dt>Yellows, <a href="#Page_66">66</a></dt>
<dt> </dt>
<dt>Zinc: chromate of, <a href="#Page_66">66</a></dt>
</dl>
<div class="vertspace-4em"></div>
<hr class="tb" />
<div class="center">Butler & Tanner, The Selwood Printing Works, Frome, and London.</div>
<hr class="chap" />
<div class="c3"><a name="Changes" id="Changes"></a>TRANSCRIBER’S AMENDMENTS</div>
<p>Transcriber’s Note: Blank pages have been deleted. Some illustrations have
been moved and the corresponding entries in the lists of illustrations
updated. Three illustrations have been rotated 90°. Footnotes have been
moved to follow the referencing paragraph. The publisher’s inadvertent
omissions of important punctuation have been corrected. Duplicative front
matter has been removed.</p>
<p>The following list indicates any additional changes made. The page number
represents that of the original publication and applies in this etext
except for footnotes and illustrations since they may have been moved.</p>
<p>Key: {<from>}[<to>]:</p>
<pre>
Page Change
- {_To face Page_}[_Page_]
12 painted and gilt calf. <i>Le Roman de Tristan et {Iseul}[Iseut].</i>
56 of wood covered with embossed leather, <i>cuir {bouill}[bouilli]</i>.
83 of repeating ornament for figures and {landscopes}[landscapes].
</pre>
<div style="padding-top: 1em;"><a href="#Start">Start of text.</a></div>
<hr class="full" />
<div>*** END OF THE PROJECT GUTENBERG EBOOK 40286 ***</div>
</body>
</html>
|
