path: root/17935.txt

Project Gutenberg's French Polishing and Enamelling, by Richard Bitmead

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org


Title: French Polishing and Enamelling
       A Practical Work of Instruction

Author: Richard Bitmead

Release Date: March 6, 2006 [EBook #17935]

Language: English

Character set encoding: ASCII

*** START OF THIS PROJECT GUTENBERG EBOOK FRENCH POLISHING AND ENAMELLING ***




Produced by K.D. Thornton and the Online Distributed
Proofreading Team at http://www.pgdp.net





FRENCH POLISHING
AND
ENAMELLING

A Practical Work of Instruction

INCLUDING
NUMEROUS RECIPES FOR MAKING POLISHES,
VARNISHES, GLAZE-LACQUERS, REVIVERS, ETC.

BY RICHARD BITMEAD

AUTHOR OF "THE CABINET-MAKER'S GUIDE," "THE UPHOLSTERER'S GUIDE," ETC.
Fourth Edition

[Illustration: Capio Lumen]

LONDON
CROSBY LOCKWOOD AND SON
7, STATIONERS' HALL COURT, LUDGATE HILL
1910

[_All rights reserved_]


PRINTED BY
WILLIAM CLOWES AND SONS, LIMITED,
LONDON AND BECCLES.




AUTHOR'S PREFACE.


Early in the present century the method generally adopted for polishing
furniture was by rubbing with beeswax and turpentine or with
linseed-oil. That process, however, was never considered to be very
satisfactory, which fact probably led to experiments being made for the
discovery of an improvement. The first intimation of success in this
direction appeared in the _Mechanic's Magazine_ of November 22, 1823,
and ran as follows: "The Parisians have now introduced an entirely new
mode of polishing, which is called _plaque_, and is to wood precisely
what plating is to metal. The wood by some process is made to resemble
marble, and has all the beauty of that article with much of its
solidity. It is even asserted by persons who have made trial of the new
mode that water may be spilled upon it without staining it." Such was
the announcement of an invention which was destined ultimately to become
a new industry.

The following pages commence with a description of the art of French
Polishing in its earliest infancy, care having been taken by the Author,
to the best of his ability, to note all the new processes and
manipulations, as well as to concisely and perspicuously arrange and
describe the various materials employed, not only for French polishing
but for the improving and preparation of furniture woods, a matter of
great importance to the polisher. The arts of Staining and Imitating,
whereby inferior woods are made to resemble the most costly, are also
fully treated, as well as the processes of Enamelling, both in
oil-varnishes and French polish, together with the method of decorating
the same. The condition of the art of polishing in America is dwelt
upon, and various interesting articles written by practical polishers in
the States, which appeared in their trade journal, _The Cabinet-maker_,
have been revised and printed in this work.

A number of valuable recipes, and other instructive matter, useful alike
to the amateur and to the practical workman, are also given.




CONTENTS.


  CHAPTER I.
  _THE IMPROVING AND PREPARATION OF FURNITURE WOODS._          PAGE
  Improving                                                      2
  Matching                                                       3
  Painting                                                       5
  Dyed Polishes                                                  6


  CHAPTER II.
  _STAINS AND IMITATIONS._
  Imitation Mahogany                                             8
  Imitation Rosewood                                             8
  Imitation Walnut                                               9
  Imitation Ebony                                               10
  Imitation Oak                                                 11
  Imitation Satin-wood                                          12
  A Blue Stain                                                  13
  A Green Stain                                                 13
  A Purple Stain                                                13
  A Red Stain                                                   14
  Imitation Purple-wood Stain                                   14
  Chemicals used in Staining                                    15
  Process of Staining                                           16
  Ready-made Wood Stains                                        17


  CHAPTER III.
  _FRENCH POLISHING._
  The Polish Used                                               18
  Rubbers                                                       22
  Position                                                      24
  Filling-in                                                    25
  Applying the Polish                                           26
  Spiriting-off                                                 30
  Prepared Spirits                                              32
  Antique Style                                                 32
  Dull or Egg-shell Polish                                      33
  Polishing in the Lathe                                        34


  CHAPTER IV.
  _CHEAP WORK._
  Glazing                                                       37
  Stencilling                                                   39
  Charcoal Polishing                                            40


  CHAPTER V.
  _RE-POLISHING OLD WORK_                                       42


  CHAPTER VI.
  _SPIRIT VARNISHING._
  Varnishes                                                     46
  Brushes and Pencils                                           47
  Mode of Operation                                             47
  East Indian Varnishes                                         48


  CHAPTER VII.
  _GENERAL INSTRUCTIONS._
  Remarks on Polishing                                          51
  The Polishing Shop                                            52


  CHAPTER VIII.
  _ENAMELLING._
  Materials                                                     57
  Tools                                                         58
  Mode of Operation                                             58
  Polishing                                                     60
  Another Process                                               61
  Decorations                                                   63


  CHAPTER IX.
  _AMERICAN POLISHING PROCESSES._
  Use of Fillers                                                65
  Making Fillers                                                70
    Japan of the Best Quality                                   70
    Fillings for Light Woods                                    70
    Another for Light Woods                                     70
    For Mahogany or Cherry Wood                                 71
    For Oak Wood                                                71
    For Rosewood                                                71
    For Black Walnut (1)                                        71
           "         (2)                                        71
    An Oil Colour for Black Walnut (3)                          72
  Finishing                                                     73
  Black Walnut Finishing                                        75
  Finishing Veneered Panels, etc.                               78
    Light Woods (Dead Finish)                                   79
    Mahogany or Cherry Wood                                     79
    Oak                                                         79
    Rosewood, Coromandel, or Kingwood (a Bright Finish)         79
    Walnut                                                      80
  Finishing Cheap Work                                          81
    With One Coat of Varnish                                    81
    Wax Finishing                                               82
    A Varnish Polish                                            82
    With Copal or Zanzibar Varnish                              83
  Polishing Varnish                                             85
  An American Polish Reviver                                    86


  CHAPTER X.
  _MISCELLANEOUS RECIPES._
  Oil Polish                                                    87
  Wax Polish                                                    87
  Waterproof French Polish                                      88
  Varnish for Musical Instruments                               88
  French Varnish for Cabinet-work                               89
  Mastic Varnish                                                89
  Cabinet-maker's Varnish                                       90
  Amber Varnish                                                 90
  Colourless Varnish with Copal                                 90
  Seedlac Varnish                                               91
  Patent Varnish for Wood or Canvas                             91
  Copal Varnish                                                 91
  Carriage Varnish                                              92
  Transparent Varnish                                           92
  Crystal Varnish for Maps, etc.                                92
  Black Varnish                                                 92
  Black Polish                                                  93
  Varnish for Iron                                              93
  Varnish for Tools                                             93
  To Make Labels Adhere to a Polished Surface                   94
  To Remove French Polish or Varnish from Old Work              94
  Colouring for Carcase Work                                    94
  Cheap but Valuable Stain for the Sap of Black Walnut          95
  Polish (American) for Removing Stains, etc., from Furniture   96
  Walnut Stain to be used on Pine and White-wood                96
  Rosewood Stain                                                97
  Rosewood Stain for Cane Work, etc.                            97
  French Polish Reviver                                         98
  Morocco Leather Reviver                                       98
  Hair-cloth Reviver                                            99
  To Remove Grease Stains from Silks, Damasks, Cloth, etc.      99
  To Remove Ink Stains from White Marble                        99


  CHAPTER XI.
  _MATERIALS USED._
  Alkanet-root                                                 100
  Madder-root                                                  100
  Red-sanders                                                  101
  Logwood                                                      101
  Fustic                                                       102
  Turmeric                                                     102
  Indigo                                                       103
  Persian Berries                                              103
  Nut-galls                                                    103
  Catechu                                                      103
  Thus                                                         104
  Sandarach                                                    104
  Mastic                                                       104
  Benzoin                                                      104
  Copal                                                        105
  Dragon's Blood                                               106
  Shellac                                                      106
  Amber                                                        107
  Pumice-stone                                                 107
  Linseed-oil                                                  108
  Venice Turpentine                                            110
  Oil of Turpentine                                            110
  Methylated Spirits                                           110




FRENCH POLISHING

AND

ENAMELLING.

CHAPTER I.

_THE IMPROVING AND PREPARATION OF
FURNITURE WOODS._


For a French polisher to be considered a good workman he should, in
addition to his ordinary ability to lay on a good polish, possess
considerable knowledge of the various kinds of wood used for furniture,
as well as the most approved method of bringing out to the fullest
extent their natural tones or tints; he should also be able to improve
the inferior kinds of wood, and to stain, bleach, or match any of the
fancy materials to which his art is applied, in a manner that will
produce the greatest perfection. The following information is given to
facilitate a thorough knowledge of the above processes.


=Improving.=--Iron filings added to a decoction of gall-nuts and vinegar
will give to ebony which has been discoloured an intense black, after
brushing over once or twice. Walnut or poor-coloured rosewood can be
improved by boiling half an ounce of walnut-shell extract and the same
quantity of catechu in a quart of soft-water, and applying with a
sponge. Half a pound of walnut husks and a like quantity of oak bark
boiled in half a gallon of water will produce much the same result.
Common mahogany can be improved by rubbing it with powdered red-chalk
(ruddle) and a woollen rag, or by first wiping the surface with liquid
ammonia, and red-oiling afterwards. For a rich mild red colour,
rectified spirits of naphtha, dyed with camwood dust, or an oily
decoction of alkanet-root. Methylated spirits and a small quantity of
dragon's blood will also produce a mild red. Any yellow wood can be
improved by an alcoholic solution of Persian berries, fustic, turmeric,
or gamboge. An aqueous decoction of barberry-root will serve the same
purpose. Birch when preferred a warm tint may be sponged with oil, very
slightly tinted with rose-madder or Venetian red; the greatest care
should be used, or it will be rendered unnatural in appearance by
becoming too red. Maple which is of a dirty-brown colour, or of a cold
grey tint, and mahogany, ash, oak, or any of the light-coloured woods,
can be whitened by the bleaching fluid (see "MATCHING"). Numerous
materials may be improved by the aid of raw linseed-oil mixed with a
little spirits of turpentine. Artificial graining may be given to
various woods by means of a camel-hair pencil and raw oil; two or three
coats should be given, and after standing for some time the ground
should have one coat of oil much diluted with spirits of turpentine, and
then rubbed off.


=Matching.=--Old mahogany furniture which has been repaired may be
easily matched by wiping over the new portions with water in which a
nodule of lime has been dissolved, or by common soda and water. The
darkeners for general use are dyed oils, logwood, aquafortis, sulphate
of iron, and nitrate of silver, with exposure to the sun's rays. For new
furniture in oak, ash, maple, etc., the process of matching requires
care and skill. When it is desirable to render all the parts in a piece
of furniture of one uniform tone or tint, bleach the dark parts with a
solution of oxalic acid dissolved in hot water (about two-pennyworth of
acid to half a pint of water is a powerful solution); when dry, if this
should not be sufficient, apply the white stain (see pp. 11, 12)
delicately toned down, or the light parts may be oiled. For preserving
the intermediate tones, coat them with white polish by means of a
camel-hair pencil. On numerous woods, carbonate of soda and bichromate
of potash are very effective as darkeners, as are also other
preparations of an acid or alkaline nature, but the two given above are
the best.

A good way of preparing these darkeners, says the "French Polisher's
Manual," an excellent little work published in Perth some years since,
is to procure twopennyworth of carbonate of soda in powder, and dissolve
it in half a pint of boiling water; then have ready three bottles, and
label them one, two, three. Into one put half the solution, and into the
other two half a gill each; to number two add an additional gill of
water, and to number three two gills. Then get the same quantity of
bichromate of potash, and prepare it in a like manner; you will then
have six staining fluids for procuring a series of brown and dark tints
suitable for nearly all classes of wood.

The bichromate of potash is useful to darken oak, walnut, beech, or
mahogany, but if applied to ash it renders it of a greenish cast. If a
sappy piece of walnut should be used either in the solid or veneer,
darken it to match the ground colour, and then fill in the dark markings
with a feather and the black stain (see pp. 10, 11). The carbonate
solutions are generally used for dark surfaces, such as rosewood
represents, and a still darker shade can be given to any one by oiling
over after the stain is dry. The better way of using these chemical
stains is to pour out into a saucer as much as will serve the purpose,
and to apply it quickly with a sponge rubbed rapidly and evenly over the
surface, and rubbed off dry immediately with old rags. Dark and light
portions, between which the contrast is slight, may be made to match by
varnishing the former and darkening the latter with oil, which should
remain on it sufficiently long; by this means the different portions may
frequently be made to match without having recourse to bleaching or
staining.


=Painting.=--The next process is painting. It frequently happens in
cabinet work that a faulty place is not discovered until after the work
is cleaned off; the skill of the polisher is then required to paint it
to match the other. A box containing the following colours in powder
will be found of great utility, and when required for use they should be
mixed with French polish and applied with a brush. The pigments most
suitable are: drop black, raw sienna, raw and burnt umber, Vandyke
brown, French Naples yellow (bear in mind that this is a very opaque
pigment), cadmium yellow, madder carmine (these are expensive), flake
white, and light or Venetian red; before mixing, the colours should be
finely pounded. The above method of painting, however, has this
objection for the best class of furniture, that the effects of time will
darken the body of the piece of furniture, whilst the painted portion
will remain very nearly its original colour. In first-class work,
therefore, stained polishes or varnishes should be applied instead of
these pigments.


=Dyed Polishes.=--The methods of dyeing polish or
varnish are as follows: for a red, put a little alkanet-root or camwood
dust into a bottle containing polish or varnish; for a bright yellow, a
small piece of aloes; for a yellow, ground turmeric or gamboge; for a
brown, carbonate of soda and a very small quantity of dragon's blood;
and for a black, a few logwood chips, gall-nuts, and copperas, or by the
addition of gas-black.

The aniline dyes (black excepted) are very valuable for dyeing polishes,
the most useful being Turkey-red, sultan red, purple, and brown. A small
portion is put into the polish, which soon dissolves it, and no
straining is required. The cheapest way to purchase these dyes is by the
ounce or half-ounce. The penny packets sold by chemists are too
expensive, although a little goes a long way.




CHAPTER II.

_STAINS AND IMITATIONS._


In consequence of the high price demanded for furniture made of the
costly woods, the art of the chemist has been called into requisition to
produce upon the inferior woods an analogous effect at a trifling
expense. The materials employed in the artificial colouring of wood are
both mineral and vegetable; the mineral is the most permanent, and when
caused by chemical decomposition within the pores it acts as a
preservative agent in a greater or less degree. The vegetable colouring
matters do not penetrate so easily, probably on account of the affinity
of the woody fibre for the colouring matter, whereby the whole of the
latter is taken up by the parts of the wood with which it first comes
into contact. Different intermediate shades, in great variety, may be
obtained by combinations of colouring matters, according to the tint
desired, and the ideas of the stainer. The processes technically known
as "grounding and ingraining" are partly chemical and partly mechanical,
and are designed to teach the various modes of operation whereby the
above effects can be produced. We will commence with


=Imitation Mahogany.=--Half a pound of madder-root, and two ounces of
logwood chips boiled in a gallon of water. Brush over while hot; when
dry, go over it with a solution of pearlash, a drachm to a pint. Beech
or birch, brushed with aquafortis in sweeping regular strokes, and
immediately dried in front of a good fire, form very good imitations of
old wood. Venetian red mixed with raw linseed-oil also forms a good
stain.

The following is a method in common use by French cabinet-makers. The
white wood is first brushed over with a diluted solution of nitrous
acid; next, with a solution made of methylated spirits one gill,
carbonate of soda three-quarters of an ounce, and dragon's blood a
quarter of an ounce; and a little red tint is added to the varnish or
polish used afterwards. Black American walnut can be made to imitate
mahogany by brushing it over with a weak solution of nitric acid.


=Imitation Rosewood.=--Boil half a pound of logwood chips in three pints
of water until the decoction is a very dark red; then add an ounce of
salt of tartar. Give the work three coats boiling hot; then with a
graining tool or a feather fill in the dark markings with the black
stain. A stain of a very bright shade can be made with methylated
spirits half a gallon, camwood three-quarters of a pound, red-sanders
a quarter of a pound, extract of logwood half a pound, aquafortis one
ounce. When dissolved, it is ready for use. This makes a very bright
ground. It should be applied in three coats over the whole surface, and
when dry it is glass-papered down with fine paper to a smooth surface,
and is then ready for graining. The fibril veins are produced by passing
a graining tool with a slight vibratory motion, so as to effect the
natural-looking streaks, using the black stain. A coat of the bichromate
of potash solution referred to on page 4 will make wildly-figured
mahogany have the appearance of rosewood.


=Imitation Walnut.=--A mixture of two parts of brown umber and one part
of sulphuric acid, with spirits of wine or methylated spirits added
until it is sufficiently fluid, will serve for white wood. Showy
elm-wood, after being delicately darkened with the bichromate solution
No. 1, page 4, will pass for walnut; it is usually applied on the cheap
loo-table pillars, which are made of elm-wood. Equal portions of the
bichromate and carbonate solutions (see page 4), used upon American
pine, will have a very good effect.

Another method for imitating walnut is as follows: One part (by weight)
of walnut-shell extract is dissolved in six parts of soft-water, and
slowly heated to boiling until the solution is complete. The surface to
be stained is cleaned and dried, and the solution applied once or twice;
when half-dry, the whole is gone over again with one part of chromate of
potash boiled in five parts of water. It is then dried, rubbed down, and
polished in the ordinary way.

The extract of walnut-shells and chromate of potash are procurable at
any large druggist's establishment. A dark-brown is the result of the
action of copper salts on the yellow prussiate of potash; the sulphate
of copper in soft woods gives a pretty reddish-brown colour, in streaks
and shades, and becomes very rich after polishing or varnishing.
Different solutions penetrate with different degrees of facility. In
applying, for instance, acetate of copper and prussiate of potash to
larch, the sap-wood is coloured most when the acetate is introduced
first; but when the prussiate is first introduced, the heart-wood is the
most deeply coloured. Pyrolignite of iron causes a dark-grey colour in
beech, from the action and tannin in the wood on the oxide of iron;
while in larch it merely darkens the natural colour. Most of the tints,
especially those caused by the prussiates of iron and copper, are
improved by the exposure to light, and the richest colours are produced
when the process is carried out rapidly.


=Imitation Ebony.=--Take half a gallon of strong vinegar, one pound of
extract of logwood, a quarter of a pound of copperas, two ounces of
China blue, and one ounce of nut-gall. Put these into an iron pot, and
boil them over a slow fire till they are well dissolved. When cool, the
mixture is ready for use. Add a gill of iron filings steeped in vinegar.
The above makes a perfect jet black, equal to the best black ebony. A
very good black is obtained by a solution of sulphate of copper and
nitric acid; when dry, the work should have a coat of strong logwood
stain.


=Imitation Oak.=--To imitate old oak, the process known as "fumigating"
is the best. This is produced by two ounces of American potash and two
ounces of pearlash mixed together in a vessel containing one quart of
hot water.

Another method is by dissolving a lump of bichromate of potash in warm
water; the tint can be varied by adding more water. This is best done
out of doors in a good light. Very often in sending for bichromate of
potash a mistake is made, and chromate of potash is procured instead;
this is of a yellow colour, and will not answer the purpose. The
bichromate of potash is the most powerful, and is of a red colour. A
solution of asphaltum in spirits of turpentine is frequently used to
darken new oak which is intended for painter's varnish, or a coating
of boiled oil.

Another method of imitating new oak upon any of the inferior
light-coloured woods is to give the surface a coat of Stephens's
satin-wood stain, and to draw a soft graining-comb gently over it, and
when the streaky appearance is thus produced a camel-hair pencil should
be taken and the veins formed with white stain. This is made by
digesting three-quarters of an ounce of flake white (subnitrate of
bismuth), and about an ounce of isinglass in two gills of boiling water;
it can be made thinner by adding more water, or can be slightly tinted
if desired.

Proficients in staining and imitating can make American ash so like oak
that experienced judges are frequently deceived, the vein and shade of
the spurious wood looking nearly as natural as the genuine. After the
veining is done, it should be coated with white hard varnish, made
rather thin by adding more spirits, after which the ground can be
delicately darkened if required.


=Imitation Satin-wood.=--Take methylated spirits one quart, ground
turmeric three ounces, powdered gamboge one and a-half ounces. This
mixture should be steeped to its full strength, and then strained
through fine muslin, when it will be ready for use. Apply with a sponge,
and give two coats; when dry, glass-paper down with fine old paper. This
makes a good imitation for inside work. By the addition of a little
dragon's blood an orange tint can be produced. A yellow colour can also
be given to wood by boiling hot solutions of turmeric, Persian berries,
fustic, etc. but the colour is very fugitive. A more permanent colour
results from nitric acid, and last of all by the successive introduction
of acetate of lead and chromate of potash. Sulphate of iron also stains
wood of a yellowish colour when used as a preservative agent, so much
so, that the use of corrosive sublimate is recommended for this purpose
when it is desirable to preserve the light colour.


=A Blue Stain.=--This dye can be obtained by dissolving East Indian
indigo in arsenious acid, which will give a dark blue. A lighter blue
can be obtained by hot solutions of indigo, of sulphate of copper, and
by the successive introduction of pyrolignite of iron and prussiate of
potash.


=A Green Stain.=--Dissolve one ounce of Roman vitriol in a quart of
boiling water, to which is added one ounce of pearlash; the mixture
should then be forcibly agitated, and a small quantity of pulverised
yellow arsenic stirred in. A green is also the result of successive
formations in the pores of the wood of a blue and a yellow as above
indicated, and by a hot solution of acetate of copper in water. A
yellowish green may be obtained by the action of copper salts on the red
prussiate of potash.


=A Purple Stain.=--Boil one pound of logwood chips in three quarts of
water, until the full strength is obtained; then add four ounces of
pearlash and two ounces of powdered indigo. When these ingredients are
thoroughly dissolved, it is ready for use, either hot or cold. A purple
is also obtained by a boiling hot solution of logwood and Brazil-wood,
one pound of the former and one quarter of a pound of the latter to a
gallon of water.


=A Red Stain.=--Methylated spirits one quart, Brazil-wood three ounces,
dragon's blood half an ounce, cochineal half an ounce, saffron one
ounce. Steep the whole to its full strength, and strain. A red can also
be produced by macerating red-sanders in rectified spirits of naphtha.
An orange-red colour may be obtained by the successive action of
bichloride of mercury and iodide of potash, madder, and ammoniacal
solutions of carmine.


=Imitation Purple-wood Stain.=--Grind a piece of green copperas on
coarse glass-paper, and mix with polish coloured with red-sanders. This
makes a capital purple stain, and is used by French cabinet-makers.

These dyestuffs may be much improved by the addition of a mordant
applied after they are dry; this will greatly assist in modifying and
fixing the tints and shades which the dyes impart. The best thing for
the purpose, in the writer's opinion, is clear ox-gall, which, besides
being useful as a mordant, will destroy all unctuous matter.


=Chemicals used in Staining.=--It may perhaps be useful here to give the
common or popular names of the chemicals employed in the operations of
staining and imitating, as few polishers know them by the scientific
names used by chemists:--

Nitric acid is but another phrase for aquafortis.
Sulphuric acid, for oil of vitriol.
Ammonia, for spirits of hartshorn.
Sulphate of magnesia, for Epsom salts.
Nitrate of potass, for sal prunelle.
Chlorine, for aqua regia.
Sulphate of copper, for blue vitriol.
Subborate of soda, for borax.
Superoxalate of potass, for salts of sorrel.
Hydrochlorate of ammonia, for sal ammoniac.
Subnitrate of bismuth, for flake white.
Acetic acid, for vinegar.
Acetate of lead, for sugar of lead.
Sulphate of lime, for gypsum.
Carbonate of potass, for pearlash.
Bitartrate of potass, for cream of tartar.
Nitrate of silver, for lunar caustic.
Supercarbonate of iron, for plumbago.
Cyanide of iron, for Prussian blue.
Subacetate of copper, for common verdigris.
Susquecarbonate of ammonia, for sal volatile.
Alcohol, for pure spirit.
Sulphate of iron, for green copperas.
Sulphate of zinc, for white copperas.


=Process of Staining.=--The natural qualities of woods are very
variable; so also are the textures of the different sorts usually used
for staining. It will be readily perceived that there is no fixed
principle upon which certain peculiar tints or shades can be produced
with any degree of certainty. In order to arrive at the best results,
the stainer is recommended to observe the following rules:--

All dry stuffs are best reduced to powder, when it is possible, before
macerating or dissolving them.

All liquids should be strained or filtered before use.

The requisite ingredients should always be tested before a free use is
made of them, as the effect produced by a coat of stain cannot be
accurately ascertained until it is thoroughly dry.

Amateurs in staining had far better coat twice or thrice with a weak
stain than apply a strong one; for if too dark a tint is first obtained
it is often irremediable. Flat surfaces will take stain more evenly if a
small portion of linseed-oil is first wiped over, well rubbed off, and
allowed to dry, then lightly papered down with fine glass-paper. End-way
wood which is of a spongy nature should first have a coat of thin
varnish, and when dry well glass-papered off. For applying stain a flat
hog-hair tool is the best; and for a softener-down a badger-hair tool is
used. For mahogany shades and tints a mottler will be found of service,
as will also a soft piece of Turkey sponge. For oak, the usual steel
graining-comb is employed for the streaking, and for veining badger
sash-tools and sable pencils.


=Ready-made Wood Stains.=--There are numerous stains suitable for common
work in the market obtainable at a small cost by residents in London,
but it is cheaper for those who reside in country towns to make their
own, if only a small quantity is required. The principal makers of wood
stains are H. C. Stephens, of 191, Aldersgate-street, E.C., and Jackson,
213, Union-street, Southwark, S.E. These makers prepare stains in a
liquid state, and also in powders for oak, walnut, mahogany, satin-wood,
ebony, and rosewood. The powders are sold in packages at 8s. per lb. or
1s. for two ounces, and are soluble in boiling water. Judson, of 77,
Southwark-street, S.E., makes a mahogany powder in sixpenny packets, and
any reliable oilman will sell a good black stain at 8d. per quart, or a
superior black stain at 1s. 2d. per quart. Fox, of 109, Bethnal
Green-road, also prepares stains in a liquid state.




CHAPTER III.

_FRENCH POLISHING._


=The Polish Used.=--The oil or wax polish was used for all kinds of
furniture before the introduction of French polish, the invention of
which, as its name implies, is due to French cabinet-makers. It was
first introduced into England about seventy years since; some time
elapsed, however, before it was brought to a high state of perfection.
At first apprentices or porters were entrusted with the polishing, they
having been usually called upon to do the wax polishing; but in course
of time it was found that its successful adoption implied the possession
of considerable skill, and it came to be regarded as an art of no little
importance--so much so, that the early polishers who had perfected
themselves used to work in a shop with closed doors, lest the secret of
their success should be discovered. From that time polishing became a
separate branch of the cabinet business.

The following original recipe as first invented has been extracted from
a French work, the _Dictionnaire Technologique_, not, however, for its
usefulness (it having gone into disuse many years ago), but as a matter
of curiosity:--

  "_French Polish._"

  Gum sandarach                        14 ounces 2 drachms
  Gum mastic in drops                   7   "    2    "
  Shellac (the yellower the better)    14   "    2    "
  Alcohol of 0.8295 specific gravity    3 quarts and 1 pint.

"Pound the resinous gums, and effect their solution by continued
agitation, without the aid of heat; if the woods are porous, add seven
ounces one drachm of Venice turpentine. If an equal weight of ground
glass be added, the solution is more quickly made, and is also otherwise
benefited by it. Before using, the wood should be made to imbibe a
little linseed-oil, the excess of which should be removed by an old
flannel."

Notwithstanding the improvement made upon the old processes by this new
method, it was by no means considered to be perfect, for the polish was
found to impart its brown tinge to the light-coloured woods, especially
in marqueterie work, and to deteriorate their appearance. It will be
readily seen that it was a great desideratum among polishers to render
shellac colourless, as, with the exception of its dark-brown hue, it
possesses all the properties essential to a good polish or spirit
varnish in a higher degree than any of the other resins.

In 1827 the Society of Arts came forward with its valuable aid and
offered a premium of a gold medal, or thirty guineas, "for a polish or
varnish made from shell or seed-lac, equally hard, and as fit for use in
the arts as that at present prepared from the above substance, but
deprived of its colouring matter." After numerous experiments, this
long-felt want was perfectly attained by Dr. Hare, who was awarded the
premium. His method was as follows: "Dissolve in an iron kettle one part
of pearlash in about eight parts of water; add one part of shell or
seed-lac, and heat the whole to ebullition. When the lac is dissolved,
cool the solution, and impregnate it with chlorine till the lac is all
precipitated. The precipitate is white, but its colour deepens by
washing and consolidation; dissolved in alcohol, lac, bleached by the
process above mentioned, yields a polish or varnish which is as free
from colour as any copal varnish." At the present time shellac is
bleached by filtration over animal charcoal.

Numerous experiments were afterwards made in the manufacture of
polishes; several chemists devoted their attention to its manufacture,
and an improved polish was soon produced which was used for a number of
years. The following are its proportions:--

  Shellac                 14 ounces.
  Sandarach                3/4 ounce.
  White resin              3/4   "
  Benzoin                  3/4   "
  Gum thus                 3/4   "
  O.P. finishing spirit    1/2 a gallon.

The "filling-in" processes also began to be used, which effected a
considerable saving in the quantity of polish usually required, and in
consequence of the expensiveness of spirits of wine rectified spirits of
naphtha was used as a substitute for the making of polishes, etc.; but
it was discovered that its continued use soon affected the eyesight of
the workmen, and it had to be abandoned, the methylic alcohol, pyroxylic
spirit, or wood spirit, as it has been differently called, taking its
place. This was first discovered by Mr. Philip Taylor in 1812, and is
obtained by distilling wood. Messrs. Dumas & Peligot, after analysing
it, determined that it contained 37.5 per cent. of carbon, 12.5 per
cent. of hydrogen, and 50 per cent. of oxygen. When pure, it remains
clear in the atmosphere; but for the sake of economy it is often
employed in the manufacture of other compounds called methylated. This
spirit began to be much used in the manufacture of polishes and
varnishes in the year 1848, and has continued to be much used ever
since.

The wonderful improvements which have been effected in polishes since
their first introduction obviously prove that they have now arrived at a
very high point of perfection, and polishing is now justly acknowledged,
both by skilled artisans and connoisseurs, to be an important decorative
art. French polish or varnish at the present time can easily be obtained
at most chemists or oil shops, or direct from the manufacturers, amongst
whom may be mentioned Mr. W. Urquhart, 327, Edgware-road, W.; Messrs.
Turner & Sons, 7 to 9, Broad-street, Bloomsbury, W.C.; Messrs. William
Fox & Son, Bethnal Green-road, E.; Mr. G. Purdom, 49, Commercial-road,
E.

The London prices are: Best French polish, 5s. 6d. per gallon; best
white polish, 9s. per gallon; brown or white hard varnish, 8s. per
gallon; patent glaze, 10s. per gallon; methylated spirits, 3s. 3d. per
gallon. For those who prefer to make their own, the following will be
found an excellent recipe:--

  12 ounces of orange shellac.
   1 ounce of benzoin.
   1 ounce of sandarach.
   1/2 gallon of methylated spirits.

Pound the gums well before mixing with the spirit, as this will hasten
their dissolution. White polish for white wood and marqueterie work
should be made with bleached shellac instead of the above. In making
polishes or varnishes, the mixture will frequently require shaking until
dissolved.


=Rubbers.=--In commencing to polish, the materials required are old
flannel for the rubbers and clean old linen or cotton rags for the
coverings, the softer the better; some polishers, however, prefer white
wadding for rubbers instead of flannel. Rubbers for large surfaces are
usually made of soft old flannel, firmly and compactly put together
somewhat in the form of a ball, and the more they possess softness and
compactness, and are large and solid, the more quickly and
satisfactorily will they polish extensive surfaces. Small pliable
rubbers are usually employed for chairs or light frame-work. Perhaps for
a beginner a rubber made of old flannel may be best, as it takes some
little practice to obtain the necessary lightness of hand.

The rubber for "spiriting-off" should be made up from a piece of old
flannel or woollen cloth, and covered with a piece of close rag,
doubled. Carefully fold the rag and screw it round at the back to make
it as firm as possible, and sprinkle some spirit on the face of it just
as it is covered; then give it two or three good smacks with the palm of
the hand, and begin by laying on as lightly as possible for the first
few strokes and gradually increase the pressure as the rubber gets dry;
then take off the first fold of the cover and work it perfectly dry.

The rubber should present to the wood you are about to work on a
smooth-rounded or convex surface. Have beside you linseed-oil in one
receptacle, and some French polish in another. Apply one drop of polish
and one drop of oil, and polish with a circular movement--traversing
steadily the _whole_ surface to be polished, and from time to time, as
may be necessary (when the rubber gets sticky and harsh, indicating that
the inside needs replenishing with more polish), open and apply more of
it, and again draw over the linen cover, holding it tightly to form the
convex face proper to do the work. After replenishing, the rubber will
probably need a little more oil to help it to work smoothly. Having thus
worked on one coat of polish evenly over all the wood until it has got
what may best be described as a _full look_, set it aside for two or
three hours to sink in and become hard, and when completely dry, lightly
paper off with glass-paper (very finest), afterwards dusting the surface
to remove any trace of powder, and lay on a second coat of polish in the
same method. Then allow twenty-four hours to dry. Another light papering
may possibly be needed--dust off as before recommended and let the wood
have a _third_ coat of polish.

For this third coat a fresh rubber should be made, the inside being
sparingly supplied with spirits of wine instead of polish. Put a double
fold of linen over it, touch it with one drop of oil, and go very
lightly and speedily over the whole work.

In spiriting-off--the object of which is to remove any trace of smudge
that may blur the surface unless removed thus by spirit--you should go
gently to work, using a very light hand, or you may take the polish off
as well, amateurs more especially.


=Position.=--All work should be placed in an easy and accessible
position while it is being polished, so that the eye may readily
perceive the effect of the rubber; this will greatly help to relieve the
difficulties attending the polishing of a fine piece of furniture. It
should also be kept quite firm, so that it cannot possibly move about.
The most suitable benches for polishers are the ordinary cabinet-makers'
benches, with the tops covered with thick, soft cloths; these cloths
should not be fastened down, it being an advantage to be able to remove
them when required. When a piece of work too large to be placed upon the
bench is in hand, pads will be found useful to rest it upon. These can
be made by covering pieces of wood about two feet in length by three
inches in width with cloth several times doubled, the work being placed
so that a good light falls upon it. All thin panelling should be tacked
down upon a board by the edges while polishing.


=Filling-in.=--The first process the wood usually undergoes is
"filling-in." This consists in rubbing into the pores of the wood
Russian tallow and plaster of Paris, which have been previously heated
and mixed together so as to form a thick paste. For rosewood, or to
darken mahogany, a little rose-pink should be added. After well rubbing
in, the surface should be cleared from all the surplus paste with the
end of the scraper, and then rubbed off with shavings or old rags, and
made quite clean. For birch or oak, some use whiting or soft putty
moistened with linseed-oil for the filling; this preparation prevents in
a great measure the rising of the grain. For white delicate woods, such
as sycamore, maple, or satin-wood, plaster of Paris, mixed with
methylated spirit, is used. When polishing pine, a coat of Young's
patent size (2d. per lb.) is used instead of the above mixtures, and
when dry is rubbed down with fine glass-paper.

Some workmen, who regard their modes of filling-in as important secrets,
do their work surprisingly quick by the methods here given. The various
processes are soon acquired by a little practice, and contribute greatly
to the speedy advancement of a smooth and imporous ground, which is the
most important point to observe in polishing.


=Applying the Polish.=--In commencing to use the polish some are
provided with a small earthenware dish, into which the polish is poured
for wetting the rubbers; while others make a slit in the cork of the
polish bottle, and so let it drip on to the rubber; whichever method is
adopted, the rubber should not be saturated, but receive just enough to
make a smear. Every time after wetting the rubber and putting on the
cover it should be pressed upon the palm of the hand, or if a small
rubber it can be tested between the thumb and finger. This is an
important operation, for by it the polisher can easily tell the exact
state of moisture, and at the same time, by the pressure being applied,
the moisture is equalised. The tip of the finger should then be just
dipped into the linseed-oil, and applied to the face of it; if the
rubber should be rather sappy, the greatest care must be used or a
coarse streaky roughness will be produced; extreme lightness of hand is
required until the rubber is nearly dry. (It would be a serious error to
bear heavily on the rubber while the surface is moist; to do so, and to
use too much oil on the rubber, are the causes of many failures in
polishing.)

In commencing to work, pass the rubber a few times gently and lightly
over the surface in the direction of the grain; then rub across the
grain in a series of circular movements, all one way, in full and free
sweeping strokes, until the rubber is dry. Continue this operation until
the pores are filled in, and the surface assumes a satisfactory
appearance. It should then be left for about twelve hours; the polish
will be well into the wood by that time. The polish should then be
carefully rubbed down with No. glass-paper; this will remove the atomic
roughness usually caused by the rising of the grain during the sinking
period. In flat-surface work a paper cork can be used, and the rubbing
lightly and regularly done in a careful manner, so as to avoid rubbing
through the outer skin, especially at the edges and corners, or the work
will be irremediably defaced.

The woods which possess a rising grain are well known to polishers;
these are the light-coloured woods with a coarse grain, viz., ash,
birch, and oak. This rising of the grain can in a great measure be
prevented by passing a damp sponge over the work before commencing the
polishing, allowing it to dry, and papering it. After the rubbing or
smoothing-down process is finished, the work should be well dusted; the
polishing can then recommence. The above operation must be again
repeated with a rotary motion and gradually increased pressure as the
rubber gets dry, and finished by lighter rubbings the way of the grain;
this will remove any slight marks that may be occasioned by the circular
movements of the rubber.

Working too long on any one part is to be avoided, nor should the rubber
be allowed to stick even for an instant, or it will pull the coating of
polish off to the bare wood. The rubber should be covered with a clean
part of the rag as soon as a shiny appearance becomes apparent upon it,
or at each time of damping, and less oil should be used towards the end
of the operation, so as to gradually clear it all off from the surface.
Rubber marks can be removed by rubbing in a direction the reverse of the
marks with a half-dry rubber and increased pressure. When the work has
received a sufficient body, in finishing the drying of the last rubber,
ply it briskly the way of the grain to produce a clean dry surface for
the spiriting-off.

The following is the method usually employed on fine carved or turned
work when finished in the best style. In the first place it is embodied
with polish, using a small rubber for the operation, after which it
should have one coat of shellac (two parts by weight of shellac to one
of spirits) applied with a brush, and when dry it should be carefully
smoothed down with flour paper, the utmost caution being observed in
dealing with the sharp edges, or the carving will be spoiled. Then it is
embodied with polish again, and one coat of glaze applied with the
greatest care. A few hours should be allowed to harden, and then
finished off with a rubber slightly damped with thin polish. This is an
expensive method, but it will pay in appearance for all the time
bestowed.

For the best class of cabinet and pianoforte work in amboyna or
burr-walnut it is advisable not to use linseed-oil on the sole of the
rubber when polishing, but the best hog's lard; the reason for this is
that these veneers being so extremely thin and porous the oil will
quickly penetrate through to the groundwork, softening the glue, and
causing the veneers to rise in a number of small blisters. Of course,
this is not always the case, but the use of lard instead of oil will be
found a good preventative. Lard is also used on the above class of work
when it is desirable to preserve the colour of the wood in its natural
state.

The following method is employed for the best work: Immediately on
receiving the job from the cabinet-maker, a good coating of thin, clean
glue should be applied with a sponge or brush; this is allowed to dry,
and thoroughly harden; it is then cleaned off, using the scraper and
glass-paper, cutting it down to the wood. The bodying-in with white
polish is the next process, the usual sinking period being allowed; it
is again cleaned off, but the scraper this time should not quite reach
the wood. Then embody again, and treat in a like manner. In getting up
the permanent body, commence with a slight embodying; let this stand,
and when the sinking period is over rub it down with a felt rubber and
powdered pumice-stone; continue this several times, till the surface
presents a satisfactory appearance, and the job is ready for the
spiriting process. By this means the wood will retain its natural
colour, and a beautiful transparent polish will result, and remain for a
number of years. This also is an expensive process, but the result
cannot be obtained in any other way.


=Spiriting-off.=--Most polishers affirm that if an interval of at least
a couple of hours elapse between the final embodying and the
spiriting-off the brilliancy of the polish will be improved, and remain
harder and more durable. The spirit is applied in exactly the same way
as the polish, and the same rubber can be used, but it should be covered
with more than one fold of the soft linen rag; care should be taken not
to make it very wet, or the gum on the surface of the work will be
redissolved, and a dulness instead of a brilliancy will result. If the
spirit should be very strong, the rubber should be breathed upon before
using, and a little more oil taken up; some, however, prefer to mix a
little polish with the spirit, while others prefer the spirit to be
weakened by exposure to the air for a few hours; experience alone must
be the teacher in this particular; but if the spirit should not "bite,"
as it is termed, all will be well. The last rubber should be worked a
little longer than usual, and a trifle quicker, so as to remove the
slight greasy moisture on the surface.

The finishing touch is given to the work by a soft rag loosely rolled up
and just a few drops of spirit dropped upon it, applied quickly the way
of the grain. This will remove every defect, and leave it clear and
brilliant. If, in a short time after finishing, the polish becomes dull
or rough, it will be owing to too much oil being absorbed in the process
and working through the surface, combined with dust. It should be
cleaned off first with a soft cloth, damped with a little warm water,
and the whole repaired, as at first, with equal parts of polish and
spirits mixed together, using the least possible damp of oil to make it
finish clear; there is no danger of its happening again. In all cases
the work must be rubbed till quite dry, and when nearly so the pressure
may be increased.

The rubber for spiriting-off should be made up from a piece of old
flannel, and be covered with a piece of old rag. This is preferable to
very thin rag, and will give a better finish.


=Prepared Spirits.=--This preparation is useful for finishing, as it
adds to the lustre and durability, as well as removes every defect of
other polishes, and it gives the surface a most brilliant appearance.

It is made of half a pint of the very best rectified spirits of wine,
two drachms of shellac, and two drachms of gum benzoin. Put these
ingredients in a bottle and keep in a warm place till the gum is all
dissolved, shaking it frequently; when cold add two teaspoonfuls of the
best clear white poppy oil; shake them well together, and it is fit for
use.


=Antique Style.=--For mediaeval or old English furniture a dull polish is
generally preferred to a French polish, because it has a gloss rather
than a brilliant polish, which materially assists in showing up
mouldings or carvings to the best advantage; it is also more in
character with the work of the Middle Ages. Another advantage is the
facility of obtaining a new polish (after being once done) should the
first one get tarnished, as the finishing process can be performed
without difficulty by any one, and a new polish obtained each time.

On receiving a job which is required to be done in this style, it should
be "filled-in" in the usual manner, and afterwards bodied with white
polish to a good extent; it is then left for a sinking period (say
twelve hours). The work is then carefully rubbed down with powdered
pumice-stone and a felt-covered block or rubber, and after well dusting
it is ready for finishing. The preparation used for this process is
mainly composed of bees'-wax and turpentine (see Wax Polish, page 87),
well rubbed in with a piece of felt or a woollen rag, and finished off
by rubbing briskly with a very soft cloth or an old handkerchief to
produce a gloss.


=Dull or Egg-shell Polish.=--This is another style of finishing for
mediaeval work; the process is very simple. In commencing a job to be
finished in this style, the process of "filling-in" and "embodying" are
first gone through, then a sinking period is allowed, after which it is
embodied again, till the work is ready for finishing. All the parts
should be carefully examined to see if there is a good coating of polish
upon them. This is important, for if the work should be only thinly
coated it is liable to be spoiled by rubbing through in the last
process. After allowing a few hours for the surface to harden, a pounce
bag of powdered pumice-stone should be applied to the work, and a
felt-covered rubber used, rubbing down in the direction of the grain
until the work is of the desired dulness.

For the cheaper kind of work done in this style, the first process, of
course, is the filling-in; then a rubber of wadding is taken and used
without a cover, made rather sappy with polish and a few drops of oil
added; and after bodying-in with this sufficiently, the work should be
stood aside for twelve hours, then rubbed down with some fine worn
glass-paper. The embodying is then again commenced, a proper rubber and
cover being used; and when sufficient is put on, and while the surface
is still soft, the pounce above mentioned should be applied, and rubbed
down with a piece of wadding slightly moistened with linseed-oil until
the desired dulness appears. This is becoming the fashionable finish for
black walnut work.


=Polishing in the Lathe.=--The lathe is of more use to a polisher than a
great many persons outside the trade would imagine. By its aid turned
work can be finished in a most superior style, and in less time than by
hand. The articles usually done by the lathe are wood musical
instruments, such as clarionets, flutes, etc.; also cornice-poles, ends,
and mahogany rings, the latter being first placed in a hollow chuck and
the insides done, after which they are finished upon the outside on a
conical chuck. For table-legs, chair-legs, and all the turnery used in
the cabinet-work, it will be found of great advantage to finish the
turned parts before the work is put together.

Most of the best houses in the trade finish their work in this way,
where all the work is polished out entirely with the rubber. In the
first place, the filling-in is done. The band is thrown off the pulley
and the work rubbed in; at the same time the pulley is turned round by
the left hand. When this is done, the band is replaced and the work
cleaned off with rags or shavings, the lathe to be driven with speed to
get a clean surface. When applying the polish the lathe should revolve
with a very slow motion.

The rubbers best adapted for turned work are made of white wadding, as
the hollows and other intricacies can be completely finished out with a
soft rubber. The work should first receive a coating of thick shellac,
two parts by weight of shellac to one of methylated spirits, and applied
with a brush or a soft sponge; after a couple of hours this is nicely
smoothed with fine paper, and the "bodying-in" completed with the soft
rubber and thin polish. There are numerous hard woods which do not
require filling-in, amongst which may be mentioned boxwood, cocus,
ebony, etc.; these may be rapidly polished in the lathe, on account of
their texture, with the white polish. In spiriting-off a very soft piece
of chamois leather (if it is hard and creased it will scratch) should be
damped with methylated spirits, then wrung so that the spirit may be
equally diffused; the lathe should then be driven at a rapid speed, and
the leather held softly to the work. In a few minutes, if a dark wood, a
brilliant surface will be produced.




CHAPTER IV.

_CHEAP WORK._


=Glazing.=--Glaze is known to the trade under several names, such as
slake, finish, and telegraph; it is used only for cheap work, when
economy of time is a consideration, and is made as follows: mastic, 1
oz.; benzoin, 5 ozs.; methylated spirit, 5 gills. A superior article can
be obtained from G. Purdom, 49, Commercial Road, Whitechapel, E., who is
the manufacturer of a "patent glaze."

First give the work a rubber or two of polish after the "filling-in"; it
is important to dry the last rubber thoroughly, so that no unctuousness
remains upon the surface before applying the glaze, otherwise it will be
of no effect. The way to apply it is as follows: Prepare a rubber as for
polishing and make it moderately wet, and take only one steady wipe the
way of the grain, never going over the same surface twice while wet; and
when dry, if one coat is found not to be enough, apply a second in the
same manner. For mouldings or the backs and sides of chair-work, this is
generally considered to be sufficient. Some polishers will persist in
using glaze to a large extent, even on the best-paid work; but it is not
recommended, as the surface will not retain its brilliancy for a
lengthened period, particularly in hot weather. Nothing is so good for
the best class of work as polishing entirely with French polish.

The way of treating small flat surfaces such as the frames of tables,
looking-glasses, builders' work, etc., is to first fill in, and give one
or two rubbers of polish, drying the last rubber thoroughly; then glaze,
and after a period of two or three hours finish with a rubber slightly
wetted with thin polish. It is a bad plan to put glaze on newly-spirited
work, or to re-apply it on old bodies.

The following is another method for cheap work: A coating of clear size
is first given in a warm state (this can be obtained at most oil-shops),
and when dry is rubbed down with fine glass-paper, after which a coating
of varnish is applied with a sponge or a broad camel-hair brush, giving
long sweeping strokes. The tool should be plied with some degree of
speed, as spirit varnishes have not the slow setting properties which
distinguish those of oil, and care should be taken not to go over the
same part twice. When this is thoroughly hard it is nicely smoothed with
fine paper, a few rubberfuls of polish is given, and it is then ready
for spiriting-off.

Another plan is frequently adopted for cheap work: Make a thin paste
with plaster of Paris, suitably tinted and watered, and well rub in
across the grain with a piece of felt or old coarse canvas till the
pores are all full; any superfluity should be instantly wiped off from
the surface before it has time to set. The succeeding processes are
papering and oiling. In applying the polish, which should be done
immediately after oiling, the rubber should be made rather sappy with
thin polish, and worked without oil. During the embodying a pounce-bag
containing plaster of Paris is sparingly used; this application tends to
fill the pores and also to harden the body of polish on the exterior,
but too much should not be used, or it will impart a semi-opaque
appearance to the work. This first body is allowed sufficient time to
harden; it is then rubbed down lightly with flour paper or old worn No.
1, and then embodied with thicker polish or a mixture of polish and
varnish, and the smallest quantity of oil applied to the rubber. When a
sufficient body of polish is given to the work, the surface is rubbed
very carefully with a lump of moist putty plied in the longitudinal
direction of the grain; this will bring up a gloss, and very little
spiriting will be required.


=Stencilling.=--An imitation of marqueterie on light-coloured woods can
be obtained by the following method: Cut a stencil pattern in stout
cartridge paper (this is best done upon a piece of glass with the point
of a sharp penknife), and place it on the centre of a panel or wherever
required, and have ready some gas-black mixed with thin polish; apply
this with a camel-hair pencil over the cut-out pattern, and when it is
removed finish the lines and touch up with a finer tool. The work should
be first bodied-in, and when the pattern is dry rubbed down with a piece
of hair-cloth (the smooth side down) on a cork rubber to a smooth
surface, after which the polishing can be proceeded with until finished.
Upon oak this will have the appearance of inlaid work.


=Charcoal Polishing.=--A method known as "charcoal polishing" is now
much used for producing the beautiful dead-black colour which seems to
have the density of ebony. Its invention is due to French
cabinet-makers. The woods used by them are particularly well adapted for
staining black or any other colour, limetree, beech, cherry, pear, soft
mahogany, or any wood of a close and compact grain being the woods
usually selected.

The first process is to give the work a coating of camphor dissolved in
water and made rather strong; this will soon soak into the wood, and
immediately afterwards another coat composed of sulphate of iron-water
with a few nut-galls added. These solutions in blending penetrate the
wood and give it an indelible tinge, and also prevent insects from
attacking it. After these coats are dry, rub the surface with a hard
brush (an old scrubbing-brush will do) the way of the grain, after which
rub the flat parts with natural stick charcoal, and the carved or
indented portions with powdered charcoal; the softest portion of the
charcoal only should be used, because if a single hard grain should be
applied it would seriously damage the surface. The workman should have
ready at the same time a preparation of linseed-oil and essence of
turpentine (linseed-oil one gill, and essence of turpentine one
teaspoonful), a portion of which should be freely taken up with a piece
of soft flannel and well rubbed into the work. These rubbings with the
preparation and charcoal several times will give the article of
furniture a beautiful dead-black colour and polish. This method of
polishing is applied to the black-and-gold furniture, cabinets, etc., in
imitation of ebony.

Another good black polish is obtained by gas-black being applied to the
rubber after wetting with French polish, the cover being then put on and
worked in the usual manner.

These black polishes should not be applied if there are coloured woods
in the piece of furniture. Should the work be already dyed black, or in
black veneers, it is best to use white polish, which will greatly help
to preserve the transparent density of the dye.




CHAPTER V.

_RE-POLISHING OLD WORK._


If the piece of furniture requiring to be re-polished should be in bad
condition, it is best to clean off thoroughly, using the liquid ammonia
(see page 94), or by the scraper and glass-paper. The indentations may
be erased by dipping into hot water a piece of thick brown paper three
or four times doubled and applying it to the part; the point of a
red-hot poker should be immediately placed upon the wet paper, which
will cause the water to boil into the wood and swell up the bruise; the
thickness of the paper prevents the wood from being scorched by the hot
poker. After the moisture is evaporated, the paper should be again
wetted if required. If only shallow dents, scratches, and broken parts
of the polish present themselves, carefully coat them two or three times
with a thick solution of shellac, and when the last coating becomes hard
carefully paper down with a piece of old glass-paper and a cork rubber.

If the surface should be in good condition, it is necessary only to
remove the viscid rust; this is done by friction with a felt-covered
rubber and pure spirits of turpentine; by this means the polish remains
unsullied. If the surface should not be in very good condition, a
flannel should be used smeared with a paste of bathbrick-dust and water,
or a paste made of the finest emery flour and spirits of turpentine.
After cleansing, and before the polish is applied, it is a good plan to
just moisten the surface with raw linseed-oil; this will cause the old
body to unite with the new one.

In order to carry out the process of re-polishing with facility, it is
necessary to disunite all the various parts, such as panels, carvings,
etc., before commencing the operation. The polish is applied in the
usual manner, and when a good body is laid on the work should be set
aside for twelve hours, after which it can be finished. It should be
particularly observed that in polishing no job should be finished
immediately after the rubbing-down process; a sinking period should
always be allowed. If the work should be immediately finished, the
consequences are that in a few hours all the marks and scratches of the
paper, etc., will be discernible, and the polished surface will present
a very imperfect appearance, although looking perfect when first
finished.

Holes and crevices may be well filled up with a cement made in the
following manner: In a large iron spoon place a lump of beeswax about
the size of a walnut, a pinch of the pigments mentioned on page 5,
according to the colour required, a piece of common rosin the size of a
nut, and a piece of tallow as large as a pea; melt, and it is ready for
use. Some add a little shellac, but much will make it very brittle. A
similar substance to the above can be bought at the French warehouses.




CHAPTER VI.

_SPIRIT VARNISHING._


Most polishers are agreed that to obtain a good surface with varnish it
is necessary to give the work, where it is possible to do so, a
rubberful of polish first, and to thoroughly dry the rubber; but in most
carved work the surface is not accessible, and the brush must be used.
Sometimes the carving is extremely coarse, and with an open porous
grain, in which case it is best to oil it first and then to fine-paper
it down; by this process a thin paste is formed by the attrition, which
materially assists in filling up the pores. Before commencing to use the
varnish have ready an earthenware dish or box,--one of the tins used for
the preserved meats or fish will answer the purpose,--with two holes
drilled so that a piece of wire can be fastened diametrically across the
top; this is called a "regulator," and when the brush is passed once or
twice over this it prevents an unnecessary quantity of varnish being
transferred to the work.


=Varnishes.=--The ingredients for making
varnish are very similar to those for making polish, but the proportions
are somewhat different. Furniture varnish consists of two kinds, viz.:
the brown-hard and the white-hard; the former is used for dark woods,
such as mahogany, walnut, rosewood, etc.; whilst the latter is used for
the light-coloured woods, in conjunction with the white polish. A few
years since the brown-hard varnish was made from these ingredients:

   1 gallon of methylated spirit,
  40 ozs. of shellac,
   4 ozs. of rosin,
   5 ozs. of benzoin,
   2 ozs. of sandarach,
   2 ozs. of white rosin.

The brown-hard varnish which is used at the present time is made
differently, and produces a better result; it is made from the
following:

   1 gallon of methylated spirit,
  32 ozs. of shellac,
   8 ozs. of rosin,
   8 ozs. of benzoin.

The white-hard or transparent varnish for white wood is made with

   1 gallon of methylated spirit,
  32 ozs. of bleached shellac,
  24 ozs. of gum sandarach.

In making either polishes or varnishes, all the gums should be first
pounded and reduced to powder before mixing with the spirit, and when
mixed they should be occasionally well shaken or stirred, so as to
hasten their dissolution.


=Brushes and Pencils.=--The brushes used for varnishing are either flat,
in tin, or round, tied firmly to the handle, and made of camel's-hair;
but the small white bristle-tools and red-sable pencils will frequently
be found of service in coating delicate carving, or turned work. Varnish
brushes can be obtained from a quarter of an inch to four inches and
upwards in width; the most useful brush, however, for general use is
about an inch wide. It is important that brushes should be cleaned in
spirits immediately after use, for if laid by in varnish they lose their
elasticity and are soon spoiled; but if this preservative principle is
ever neglected, the hardened brush should be soaked in methylated
spirit, and if wanted for immediate use the spirit will soften the
varnish quicker if made luke-warm. The spirit should be gently pressed
out by the finger and thumb. All varnish brushes when not in use should
be hung up, or kept in such a position that they do not rest upon their
hairy ends, either in a box or tin free from dust.


=Mode of Operation.=--It is usual in varnishing to give the work three
coats, and always allow each coat to dry thoroughly before applying the
next. It should be noted that spirit varnishes begin to dry immediately
they are laid on; therefore, on no account should they be touched with
the brush again whilst wet, or when dry they will present a rough
surface. Always ply the brush quickly, and never go over a second time.
When giving the first or second coats it is unimportant how they are
applied, whether across the grain or with the grain, but the finishing
coat should always be with the grain. If the varnish should appear
frothy when laid on, it is of no consequence, as it will dry smooth if
equally and evenly applied before a good fire or in a warm atmosphere.

Coloured varnishes can be made in exactly the same manner as coloured
polishes (see page 6). The beautiful glossy black varnishes so admired
on Indian cabinet-work, specimens of which can be seen at the Indian
Museum, are very difficult to obtain in England, but a description of
them may be interesting.


=East Indian Varnishes.=--The Sylhet varnish is composed of two parts of
the juice of the bhela (the tree which bears the marking nuts of India),
and one part of the juice of the jowar. The articles varnished with it
at Sylhet are of the most beautiful glossy black; and it seems equally
fitted for varnishing iron, leather, paper, wood, or stone. It has a
sort of whitish-grey colour when first taken out of the bottle, but in a
few minutes it becomes perfectly black by exposure to the air. In the
temperature of this country it is too thick to be laid on alone; but it
may be rendered more fluid by heat. In this case, however, it is clammy,
and seems to dry very slowly. When diluted with spirits of turpentine,
it dries more quickly; but still with less rapidity than is desirable.

The _tsitsi_, or Rangoon varnish, is less known than the Sylhet varnish.
It is probably made from the juice of the bhela alone. It appears to
have the same general properties as the Sylhet varnish, but dries more
rapidly. The varnish from the _kheeso_, or varnish-tree, may be the same
as the Rangoon varnish, but is at present considered to be very
different. The kheeso grows particularly in Kubboo, a valley on the
banks of the Ningtee, between Munnipore and the Burman empire. It
attains to such a large size, that it affords planks upwards of three
feet in breadth, and in appearance and grain is very like mahogany. A
similar tree is found in great abundance and perfection at Martaban.

A poisonous vapour exhales from several of the Indian varnishes,
especially from that of Sylhet, and is apt to produce over the whole
skin inflammations, swellings, itchings, and pustules, as if the body
had been stung by a number of wasps. Its effects, however, go off in a
few hours. As a preventative the persons who collect the varnish, before
going to work, smear their faces and hands with greasy matter to prevent
the varnish poison coming into contact with their skin.




CHAPTER VII.

_GENERAL INSTRUCTIONS._


=Remarks on Polishing.=--Amateurs at French polishing will be more
successful on a large surface than a small one.

When polishing, the rubber-cloth should be changed occasionally, or the
brightness will not remain when finished.

A most efficacious improver of many kinds of woods is raw linseed-oil
mixed with a little rectified spirits of turpentine.

French polish can be tinted a light-red with alkanet-root, and a
dark-red with dragon's blood.

A good Turkey sponge is capable of spreading either stain or varnish
more smoothly than a camel's-hair brush on a flat surface.

The sub-nitrate of bismuth mentioned on p. 12 is beginning to supersede
oxalic acid for bleaching processes.

Thin panels for doors should be securely tacked down to a level board,
and polished with a large round flannel rubber having a very flat sole.
Fret-work panels should have all the edges entirely finished with
varnish before they undergo the above operation. To get a good polish
upon a full-fret panel is considered by polishers to be the most
difficult part in the work, on account of the extreme delicacy and
frangibility of the work and the great carefulness required.

Soft spongy wood may be satiated by rubbing a sponge well filled with
polish across the grain until it becomes dry.

In polishing a very large surface, such as a Loo-table top or a wardrobe
end, it is best to do only half at a time, or if a large top a quarter
only.

The approved method of treating dining-table tops is to well body-in
with French polish, after which thoroughly glass-paper down with fine
paper, and then use the oil polish (see page 87).

Immediately after using a rubber, it should be kept in an air-tight tin
canister, where it will always remain fresh and fit for use.


=The Polishing Shop.=--A few words as to the polishing shop may be
acceptable to those who possess ample room and desire the best results.

First in order is the location and arrangement of the finishing rooms.
Preference is to be given to the upper rooms of a building for several
reasons, among which may be named the securing of better light, greater
freedom from dust, and superior ventilation.

A good light in this, as in many other arts, is a very important matter,
and by a good light we mean all the light that can be obtained without
the glare of the direct rays of the sun. Light from side windows is
preferable to that from skylights for three reasons: (1) Skylights are
very liable to leakage; (2) they are frequently, for greater or less
periods, covered with snow in winter; (3) the rays of the sun
transmitted by them in summer are frequently so powerful as to blister
shellac or varnish.

Good ventilation is at all times of importance, and especially so in
summer, both as tending to dry the varnish or shellac more evenly and
rapidly, and as contributing to the comfort of the workmen. The latter
consideration is of importance even as a matter of economy, as men in a
room the atmosphere of which is pleasant and wholesome will feel better
and accomplish more than they could do in the close and forbidding
apartments in which they sometimes work.

Any suggestion in reference to freedom from dust, as a matter to be
considered in locating rooms for this business, would seem to be
entirely superfluous, as it is clear that there is hardly any
department of mechanical work which is so susceptible to injury from
dust as the finishing of furniture, including varnishing and polishing.

Finishing rooms may be arranged in three departments. The first should
include the room devoted to sand-papering and filling. These processes,
much more than any other part of furniture polishing, produce dirt and
dust, and it is plain that the room devoted to them should be so far
isolated from the varnishing room as not to introduce into it these
injurious elements.

Another room should be appropriated to the bodying-in, smoothing and
rubbing-down processes. The third room is for spiriting and varnishing,
or the application of the final coats of varnish, which is the most
important of all the processes in finishing. It requires a very light
and clean room, and a greater degree of heat than a general workroom. It
should, as nearly as possible, be uniform, and kept up to _summer heat_;
in no case ought the temperature to fall below fifty nor rise higher
than eighty-five degrees Fahrenheit while the varnishing process is
going on. Varnishing performed under these circumstances will be more
thorough in result, have a brighter appearance and better polish, than
if the drying is slow and under irregular temperature. For drying work,
the best kind of heat is that from a stove or furnace.

Steam heat is not so good for two reasons: (1), it is too moist and
soft, causing the work to sweat rather than to dry hard, and (2), the
temperature of a room heated by steam is liable to considerable
variation, and especially to becoming lower in the night. This _fire
heat_ is as necessary for the varnishing room in damp and cloudy weather
in summer as it is in winter. At all seasons, and by night as well as by
day, the heat should be as dry as possible, and kept uniformly up to
summer heat, by whatever means this result is secured. Varnished work,
after receiving the last coat, should be allowed to remain one day in
the varnishing room. It may then be removed into the general workroom.

A remark may be proper here, viz., that there is sometimes a failure to
secure the best and most permanent results from not allowing sufficient
time for and between the several processes. An order is perhaps to be
filled, or for some other reason the goods are "rushed through" at the
cost of thoroughness and excellence of finish.

The following suggestion is made by way of caution in reference to the
disposal of oily rags and waste made in the various processes of
finishing. These articles are regarded as very dangerous, and are
frequently the cause of much controversy between insurance companies and
parties who are insured. The best way to dispose of this waste is to put
it into the stove and burn it as fast as it is produced. If this rule
is strictly adhered to there will be no danger of fire from this source.
All liquid stock should be kept in close cans or barrels, and as far
from the fire as possible.




CHAPTER VIII.

_ENAMELLING._


The process of enamelling in oil varnishes as applied to furniture must
be understood as a smooth, glossy surface of various colours produced by
bodies of paint and varnish skilfully rubbed down, and prepared in a
peculiar way so as to produce a surface equal to French polish. Ornament
can be added by gilding, etc., after the polished surface is finished.

We will begin with the white or light-tinted enamel. The same process
must be pursued for any colour, the only difference being in the
selection of the materials for the tint required to be produced.

It should be observed that enamelling requires the exercise of the
greatest care, and will not bear hurrying. Each coat must be allowed
sufficient time for the hardening, and the rubbing down must be
patiently and gently done; heavy pressure will completely spoil the
work.


=Materials.=--The materials used for the purpose above named are: white
lead ground in turpentine and the best white lead in oil; a clear,
quick, and hard-drying varnish, such as the best copal, or the varnishes
for enamel manufactured by Mr. W. Urquhart, 327, Edgware Road, W.; or
white coburg and white enamel varnish, ground and lump pumice-stone, or
putty-powder, great care being taken in the selection of the
pumice-stone, as the slightest particle of grit will spoil the surface;
and rotten-stone, used either with water or oil.


=Tools.=--The tools required are several flat wooden blocks, of various
sizes and forms, suitable for inserting into corners and for
mouldings--these must be covered with felt on the side you intend to
use, the felt best adapted for the purpose being the white felt, from a
quarter to half an inch in thickness, which can be obtained of Messrs.
Thomas Wallis & Co., Holborn Circus, or at the woollen warehouses; two
or three bosses (made similar to polish rubbers) of cotton-wool, and
covered with silk (an old silk handkerchief makes capital coverings);
wash or chamois leather, and a good sponge.


=Mode of Operation.=--If the wood is soft and porous it is best to
commence with a coating of size and whiting applied in a warm state,
which is allowed to dry; it is then rubbed down with glass-paper, and
two coats of common paint given, mixed in the usual way and of the same
colour as you intend to finish with. In practice this is found to be
best; after these two coats are thoroughly dry, mix the white-lead
ground in turps, with only a sufficient quantity of varnish to bind it,
thinning to a proper consistency with turps. It is as well to add a
little of the ordinary white-lead ground in oil, as it helps to prevent
cracking. Give the work four or five coats of this, and allow each coat
to dry thoroughly. When it is hard and ready for rubbing down, commence
with a soft piece of pumice-stone and water, and rub just sufficient to
take off the roughness. Now use the felt-covered rubbers and ground
pumice-stone, and cut it down, working in a circular manner. The
greatest care is required to obtain a level surface free from scratches.

After the work is well rubbed down, if it should appear to be
insufficiently filled up, or if scratched, give it two more coats, laid
on very smoothly, and rub down as before. If properly done, it will be
perfectly smooth and free from scratches. Wash it well down, and be
careful to clean off all the loose pumice-stone. Then mix flake-white
from the tube with either of the above-named varnishes, till it is of
the consistency of cream. Give one coat of this, and when dry give it
another, adding more varnish. Let this dry hard, the time taken for
which will of course depend upon the drying qualities of the varnish;
some will polish in eight or nine days, but it is much the best to let
it stand as long as you possibly can, as the harder it is, the brighter
and more enduring will be the polish. When sufficiently hard, use the
felt, and very finely-ground pumice-stone and water; with this cut down
till it is perfectly smooth; then let it stand for a couple of days, to
harden the surface.


=Polishing.=--In commencing to bring up a polish, first take
rotten-stone, either in oil or water; use this with the felt rubber for
a little while, then put some upon the surface of the silk-covered boss,
and commence to rub very gently in circular strokes; continue this till
there is a fine equal surface all over. The polish will begin to appear
as you proceed, but it will be of a dull sort. Clean off: if the
rotten-stone is in oil, clean off with dry flour; if in water, wash off
with sponge and leather, taking care that you wash it perfectly clean
and do not scratch.

You will now, after having washed your hands, use a clean damp chamois
leather, holding it in the left hand, and using the right to polish
with, keeping it clean by frequently drawing it over the damp leather.
With the ball of the right hand press gently upon the work, and draw
your hand sharply, forward or towards you; this will produce a bright
polish, and every time you bring your hand forward a sharp shrill sound
will be heard similar to rubbing on glass. Continue this till the whole
surface is one bright even polish. It will be some time before you will
be able to do this perfectly, especially if the skin is dry or hard, as
it is then liable to scratch the work. A smooth, soft skin will produce
the best polish.

For the interior of houses, the "Albarine" enamel manufactured by the
Yorkshire Varnish Company, of Ripon, is recommended. This article
combines in itself a perfectly hard solid enamel of the purest possible
colour; and for all interior decorations, where purity of colour and
brilliancy of finish are desired, it is universally admitted to be the
most perfect article of the kind hitherto introduced to the trade. It is
applied in the same manner as ordinary varnish.

_Another Process._--The preceding section describes the process of
enamelling by oil varnishes, and the directions referring to the
polishing will be found of value for the "polishing up" on painted
imitations of woods or marbles. There is another process whereby an
enamel can be produced upon furniture at a much cheaper rate than the
preceding, and one too, perhaps, in which a polisher may feel more "at
home." The work should first have a coating of size and whiting (well
strained); this will act as a pore-filler. When dry, rub down with fine
paper, after which use the felt-covered rubber and powdered
pumice-stone, to remove all the scratches caused by the glass-paper and
to obtain a smooth and good surface. Then proceed to make a solution for
the enamel: first procure two ounces of common isinglass from the
druggist's, and thoroughly dissolve it in about a pint of boiling water;
when dissolved, stir in two ounces and a-half of subnitrate of
bismuth--this will be found to be about the right quantity for most
woods, but it can be varied to suit the requirements. With this give the
work one coat, boiling hot; apply it with a soft piece of Turkey sponge,
or a broad camel's-hair brush, and when dry cut down with powdered
pumice-stone; if a second coat is required, serve in precisely the same
manner. Then proceed to polish in the ordinary way with white polish.
After wetting the rubber, sprinkle a small quantity of the subnitrate of
bismuth upon it; then put on the cover, and work in the usual manner;
continue this till a sufficient body is obtained, and after allowing a
sufficient time for the sinking and hardening it can be spirited off.

Enamelled furniture has had, comparatively speaking, rather a dull sale,
but there is no class of furniture more susceptible of being made to
please the fancy of the many than this. It can be made in any tint that
may be required by the application of Judson's dyes, and the exercise of
a little skill in the decoration will produce very pleasing effects.


=Decorations.=--The decorations are usually ornaments drawn in gold. A
cut-out stencil pattern is generally used, and the surface brushed over
with a camel's-hair pencil and japanner's gold size, which can be
obtained at the artist's colourman's, or, if preferred, can be made by
boiling 4 ozs. of linseed-oil with 1 oz. of gum anime and a little
vermilion. When the size is tacky, or nearly dry, gold powder or gold
leaf is applied. The gold is gently pressed down with a piece of
wadding, and when dry the surplus can be removed with a round
camel's-hair tool. In all cases where gold has been fixed by this
process it will bear washing without coming off, which is a great
advantage.




CHAPTER IX.

_AMERICAN POLISHING PROCESSES_


The method of polishing furniture practised by the American
manufacturers differs considerably from the French polishing processes
adopted by manufacturers in most European countries. This difference,
however, is mostly compulsory, and is attributable to the climate. The
intense heat of summer and the extreme cold of winter will soon render a
French polish useless, and as a consequence numerous experiments have
been tried to obtain a polish for furniture that will resist heat or
cold. The writer has extracted from two American cabinet-trade journals,
_The Cabinet-maker_ and _The Trade Bureau_, descriptions of the various
processes now used in the States, which descriptions were evidently
contributed by practical workmen. The following pages are not, strictly
speaking, a mere reprint from the above-named journals, the articles
having been carefully revised and re-written after having been
practically tested; attention to them is, therefore, strongly
recommended.

In these processes the work is first filled in with a "putty filler,"
and after the surface has been thoroughly cleaned it is ready for
shellac or varnish. Second, a coating of shellac is next applied with a
brush or a soft piece of Turkey sponge. This mixture is composed of two
parts (by weight) of shellac to one of methylated spirits, but what is
called "thin shellac" is composed of one part shellac to two of spirits.
After the coating is laid on and allowed to dry, which it does very
soon, it is rubbed carefully with fine flour glass-paper, or powdered
pumice-stone--about four coats are usually given, each one rubbed down
as directed. Third, when the surface has received a sufficient body, get
a felt-covered rubber and apply rotten-stone and sweet oil in the same
manner as you would clean brass; with this give the work a good rubbing,
so as to produce a polish. Fourth, clean off with a rag and sweet oil,
and rub dry; then take a soft rag with a few drops of spirit upon it,
and vapour up to a fine polish. With these few preliminary remarks, the
following will be easily understood.


=Use Of Fillers.=--The cost of a putty filler consists chiefly in the
time consumed in applying it. In the matter of walnut-filling much
expense is saved in the processes of coating and rubbing if the pores of
the wood be filled to the surface with a substance that will not shrink,
and will harden quickly. The time occupied in spreading and cleaning a
thin or fatty mixture of filler, or a stiff and brittle putty made fresh
every day, is about the same, and while the thin mixture will be subject
to a great shrinkage, the putty filler will hold its own. It will thus
be seen that a proper regard to the materials used in making fillers,
and the consistency and freshness of the same, form an important element
in the economy of filling.

A principal cause of poor filling is the use of thin material. By some a
putty-knife is used, and the filling rubbed into the surfaces of
mouldings with tow, while others use only the tow for all surfaces,
mostly, however, in cases of dry filling. In the use of the wet filler,
either with a knife or with tow, workmen are prone to spread it too thin
because it requires less effort, but experience shows that the greatest
care should always be taken to spread the putty stiff and thick,
notwithstanding the complaints of workmen. In fact, this class of work
does not bring into play so much muscle as to warrant complaints on
account of it. Nor can there be any reasonable excuse for taking a
longer time to spread a stiff filler than a thin filler.

Good results are not always obtained by the use of thick fillers,
because the putty is spread too soon after the application of the first
coat of oil, which liquid should be quite thin, and reduced either with
benzine or turpentine, so that when the putty is forced into the pores
the oil already in them will have the effect of thinning it. As an
illustration of the idea meant here to be conveyed, we will suppose a
quantity of thick mud or peat dumped into a cavity containing water, and
a similar quantity of the same material dumped into another cavity
having no water; the one fills the bottom of the cavity solid, while the
other becomes partly liquid at the bottom, and must of necessity shrink
before it assumes the solidity of the former. Hence it appears that work
to be filled should be oiled and allowed to stand some time before
receiving the filler, or until the oil has been absorbed into the pores.

The preparatory coating should not be mixed so as to dry too quickly,
nor allowed to stand too long before introducing the putty, for in this
case the putty when forced along by the knife will not slip so easily as
it should.

The cost of rubbing and sand-papering in the finishing process is very
much lessened if the cleaning be thorough, and if all the corners and
mouldings be scraped out, so that pieces of putty do not remain to work
up into the first coat of shellac, or whatever finish may be used as a
substitute for shellac.

Another important feature in hard filling is to let the work be well
dried before applying the first coat of finish. One day is not
sufficient for the proper drying of putty fillers, and if in consequence
of insufficient drying a part of the filling washes out, it is so much
labour lost. As a safeguard against washing out, these fillers should be
mixed with as much dryer or japan as the case warrants, for it
frequently occurs that work must be finished, or go into finish, the day
following the filling, whether it be dry or not.

By observing the main facts here alluded to, good filling may always be
obtained, and at a cost not exceeding that of poor work.

For the light woods, including ash, chestnut, and oak, the filling is
similar to that used in walnut, except the colouring material, which, of
course, must be slight, or just enough to prevent the whiting and
plaster from showing white in the pores. This colouring may consist of
raw sienna, burnt sienna, or a trifle raw, or umber; one of these
ingredients separate, or all three combined, mixed so as to please the
fancy and suit the prevailing style. The colouring may be used with a
dry filling, although a wet filling is more likely to give a smooth
finish and greater satisfaction, and the colour of the filler can be
seen better in the putty than in the dry powder.

Upon cheap work a filler should be used that requires the least amount
of labour in its application. For this purpose liquid fillers, like
japan, are suitable. If, however, a fine finish on fine goods is
required, the putty compositions of various mixtures are the more
appropriate. The secret of the process of filling consists in the
mixing of the compounds and the method of using them. A liquid filler
or a japan simply spread over the work in one or two coats can hardly be
called filling, yet this will serve the purpose very well for cheap
furniture.

Thick compositions or putty fillers are composed of whiting and plaster,
or similar powders having little or no colour. This material is mixed
with oil, japan, and benzine, with a sufficient quantity of colouring
matter to please the fancy. The value of these fillers is in proportion
to their brittleness or "shortness," as it is termed, and, to give them
this quality, plaster is used and as much benzine or turpentine as the
mixture will bear without being too stiff or too hard to clean off.
Sometimes a little dissolved shellac is used to produce "shortness."
This desirable feature of a filler is best effected by mixing a small
quantity of the material at a time. Many workmen mistakenly mix large
batches at a time with a view of securing uniformity of colour, and this
is one cause why such fillers work tough and produce a poor surface. An
oil mixture soon becomes fatty and tough, and must be reduced in
consistency when used, as it is apt when old to "drag" and leave the
pores only partly filled. These fillers should be mixed fresh every day,
and allowed to stiffen and solidify in the wood rather than out of it.

The surface of a pore is the largest part of it, and it is desirable to
fill it to a level as nearly as possible. This is done by using the
filler thick or stiff.


=Making Fillers.=--In making "fillers," a quantity of the japan which is
used in the ingredients can be made at one time, and used from as
occasion may require. It is made in the following manner:

_Japan of the Best Quality._--Put 3/4 lb. gum shellac into 1 gall.
linseed-oil; take 1/2 lb. each of litharge, burnt umber, and red-lead,
also 6 oz. sugar of lead. Boil in the mixture of shellac and oil until
all are dissolved; this will require about four hours. Remove from the
fire, and stir in 1 gall. of spirits of turpentine, and the work is
finished.

_Fillings for Light Woods._--Take 5 lb. of whiting, 3 lb. calcined
plaster (plaster of Paris), 1/2 gall. of raw linseed-oil, 1 qt. of
spirits of turpentine, 1 qt. of brown japan, and a little French yellow
to tinge the white. Mix well, and apply with a brush; rub it well with
excelsior or tow, and clean off with rags. This thoroughly fills the
pores of the wood and preserves its natural colour.

_Another for Light Woods._--Take 10 lb. of whiting, 5 lb. of calcined
plaster, 1 lb. of corn starch, 3 oz. calcined magnesia, 1 gall. of raw
linseed-oil, 1/2 gall. spirits of turpentine, 1 qt. of brown japan, 2
oz. French yellow. Mix well, and apply with brush; rub in well with
excelsior or tow, and clean off with rags.

_For Mahogany or Cherry Wood._--Take 5 lb. of whiting, 2 lb. of calcined
plaster, 11/2 oz. dry burnt sienna, 1 oz. Venetian red, 1 qt. of boiled
linseed-oil, 1 pt. of spirits of turpentine, and 1 pt. of brown japan.
Mix well, apply with brush, and rub well in with excelsior or tow. Clean
off with rags dry.

_For Oak Wood._--Take 5 lb. of whiting, 2 lb. calcined plaster, 1 oz.
dry burnt sienna, 1/2 oz. of dry French yellow, 1 qt. raw linseed-oil, 1
pt. benzine spirits, and 1/2 pt. white shellac. Mix well, apply with
brush, rub in with excelsior or tow, and clean off with rags.

_For Rosewood._--Take 6 lb. of fine whiting, 2 lb. of calcined plaster,
1 lb. of rose-pink, 2 oz. of Venetian red, 1/2 lb. of Vandyke brown, 1/2
lb. of Brandon red, 1 gall. of boiled linseed-oil, 1/2 gall. of spirits
of turpentine, 1 qt. of black japan. Mix well together, apply with
brush, rub well in with tow, and clean off with rags.

_For Black Walnut_ (1).--For medium and cheap work. Take 10 lb. of
whiting, 3 lb. dry burnt umber, 4 lb. of Vandyke brown, 3 lb. of
calcined plaster, 1/2 lb. of Venetian red, 1 gall. of boiled
linseed-oil, 1/2 gall. of spirits of turpentine, 1 qt. of black japan.
Mix well and apply with brush; rub well with excelsior or tow, and clean
off with rags.

_For Black Walnut_ (2).--An improved filling, producing a fine
imitation of wax finish, may be effected by taking 5 lb. of whiting,
with 1 lb. of calcined plaster, 6 oz. of calcined magnesia, 1 oz. of dry
burnt umber, 1 oz. of French yellow to tinge the white. Add 1 qt. of raw
linseed-oil, 1 qt. of benzine spirits, 1/2 pt. of very thin white
shellac. Mix well, and apply with a brush; rub well in, and clean off
with rags.

_An Oil-Colour for Black Walnut_ (3), to be used only on first-class and
custom work.--Take 3 lb. of burnt umber ground in oil, 1 lb. of burnt
sienna ground in oil, 1 qt. of spirits of turpentine, 1 pt. of brown
japan. Mix well and apply with a brush. Sand-paper well; clean off with
tow and rags. This gives a beautiful chocolate colour to the wood.

Numerous compositions are in the market for filling the pores of wood,
and in this connection particular attention has been given to walnut,
for the reason that this wood is used in large quantities in the
furniture industry, and is nearly, if not quite, as porous as any other
of the woods used.

A variety of walnut fillings have been recommended to the trade in order
to meet the demand consequent upon the different grades of finish and
the method of obtaining the finish, so that it would be difficult to
pronounce as to the superiority of any one filling for general purposes.
In treating this subject, attention should be given to the necessities
for the use of filling, so that each one may determine for himself the
kind of composition best adapted for the work in hand, and the best
method of applying it.


=Finishing.=--Having described the methods of making and applying the
"fillings," we will now describe the mode of finishing, and begin with
the "dead-oil finish." We can remember when a satisfactory oil-finish
was produced either with a good quality of japan or a fair quality of
spirits. These materials are recommended to be used by inexperienced
workmen and those not familiar with the mixing of the various grades of
japan and varnish with oil, turpentine, benzine, etc. This method of
oil-finish, too, is scarcely inferior to the shellac or spirit-varnish
method, and it is cheaper. When the best finish is desired, a sufficient
number of coats to fill the pores of wood to a level are required, and
then the whole surface should be subjected to the rubbing process. The
use of these fillers provides an oil-finish in a simplified form for
those who are not aware of the difference between hard and soft gum
compositions as a base for rubbing. In fact, the rubbing process
constitutes a fine oil-finish, and requires a hard gum, whether it be of
japan, varnish, or shellac.

The use of varnish or its substitute as a filler and finish is more
frequent than the use of shellac, and for cheap work it is equally good.
The surface produced by a hard gum composition must be smooth and dead,
or but slightly glossed, so as to admit of the pores being filled full
or to a level. It may be added that a coat or any number of coats of the
composition referred to above is substantially a filling, and the
quality of finish depends upon the number of coats, together with the
amount of rubbing applied.

Thus far we have simply called attention to the best quality of
oil-finish and the manner of producing it. Possibly three-fourths of all
wood-finishing, particularly walnut-finishing, is several degrees below
the best quality. In fact, oil-finish may imply only one coat of any
composition that will dry, while two coats may be regarded as fair, and
three coats a very good quality of finish. For the class of finish not
rubbed down with pumice-stone and water, oil-varnish would be out of
place on account of its gloss; hence shellac, being in composition
similar to japan, is the better material, because of its dull appearance
or lack of gloss as compared with shellac.

In addition to the liquid fillers already mentioned, there is a putty or
powder filling used for cross-grained woods, or such woods as have a
deep pore. This filling is forced into the wood previous to the
application of the other finishing compounds, with the use of which it
in no way interferes. On the contrary, it economises the use of the
liquid fillers, and, while constituting a part of an oil-finish, is also
a finish wholly independent of the other methods mentioned--that is to
say, the same results can be obtained by the use of either one, although
the putty or powder filling is attended with greater expense both as to
time and material. The hard filling is generally used on walnut, ash,
and all coarse-grained woods.

With regard to oil-finishes, viz., spirit-varnish or oil-varnish,
shellac is thought by many to be the best for fine work; but others
think differently. We may say of shellac that it will finish up into any
degree of polish, and while it will not retain a French polish long in
this climate, it will replenish easier and cheaper than any other
finish, and continue to improve under each application. For a common
finish, however, oil preparation is as good as shellac, and even for a
fine finish it is only second to shellac, if made of a hard gum. On
common finish, too, the oil will wear better than shellac in stock or on
storage, so far as preserving its freshness is concerned.

The cost of oil-finish is governed chiefly by the amount of labour
expended on it. A suite of walnut furniture can be well rubbed with
sand-paper in two hours, or even less; while two weeks could be
profitably employed in rubbing another suite with pumice and water.


=Black Walnut Finishing.=--The fashionable finish for black walnut work,
particularly chamber sets, is what is known to the trade as the
"dead-oil finish." It is admired, perhaps, because it has a gloss,
rather than a shine of the varnish stamp. There is no more labour
required upon it than upon a bright finish, but the process of
manipulation is different, and harder to the fingers.

It should be premised that the walnut work of the day bears upon its
surface, to a greater or less extent, raised panels covered with French
burl veneer. And upon this fact largely depends the beauty of the
production. And the endeavour is to so finish the article that there
shall be a contrast between the panel and the groundwork on which it is
placed. In other words, the former should be of a light colour, while
the latter is of a darker shade. In that view the palest shellac should
be used on the panels, and darker pieces, liver coloured, etc., on the
body of the work. The darker grades of shellac are the cheaper, and will
answer for the bulk of the work, but the clearest only for the panels.

In commencing to finish a job direct from the cabinet-maker's hand,
rough and innocent of sand-paper, first cover the panels with a coat of
shellac to prevent the oil in the filling from colouring them dark.
Next, cover the body of the work with a wood filling composed of whiting
and plaster of Paris, mixed with japan, benzine, and raw linseed-oil, or
the lubricating oil made from petroleum; the whole covered with umber,
to which, in the rare cases when a reddish shade is wanted, Venetian
red is also added. This filling is then rubbed off with cloths, and by
this process tends to close up the grain of the wood and produce an even
surface. More or less time should be allowed after each of the several
steps in the finishing process for the work to dry and harden, though
much less is required in working with shellac than with varnishes
composed of turpentine, oil, and gums. But the time that should be
allowed is often lessened by the desire to get the work through as soon
as possible, so that no standard can be set up as to the number of hours
required between each of the several processes. It would be well if
twelve hours intervened, but if work to which ten days could well be
devoted must be hurried through in three, obviously the processes must
follow each other in a corresponding haste.

A coating of shellac is then given the whole work, light on the panels
and dark on the body work, and when it has dried and hardened, which it
does very soon, it may be rubbed down. This process of "rubbing down"
should be done evenly and carefully, so as not to rub through the
shellac at any point, and be done with the finer grades of sand-paper
for the cheaper class of work, particularly at first, but at a later
period of the process, and for the better class of articles in all
cases, hair-cloth should be used, the material for the "rubbing down"
being pumice-stone moistened with raw linseed-oil for the best work, and
the lubricating oil, before mentioned, for cheaper work, or the covered
parts of the better grades. This rubbing down involves labour, wear of
fingers and finger-nails, and is carried on with an ordinary bit of
hair-cloth, the smooth surface next the wood, and not made in any
particular shape, but as a wad, ball, or otherwise. In the corners and
crevices where the hair-cloth will not enter it will be necessary to use
sand-paper of the finest grades, and worn pieces only.

Three coats of shellac are put on, followed each time by this
rubbing-down process, each one giving the work a smoother feeling and a
more perfect appearance. Afterwards, to complete the whole, a coating of
japan thinned with benzine is applied, which gives to the work a clean
appearance and the dead glossy finish.

There is this objection to the above style of finish, that the japan
catches all the dust which touches it, and holds it permanently, so that
many of the best workmen will not have work finished in this way for
their own private houses, preferring the brighter look given by shellac
and varnish without rubbing down the last coat, believing that the work
can be kept much cleaner.


=Finishing Veneered Panels, etc.=--The large oval panels of desks, etc.,
covered with French veneer, are generally taken out and finished by
themselves. The process is similar to that above given, with successive
coats of shellac and varnish, and the oil and pumice-stone rubbing down;
but the final part of this latter process is a rubbing down with
rotten-stone; then the merest trifle of sweet-oil is applied all over
the surface and wiped off. (See Rosewood, etc., farther on.)

_For Light Woods (Dead Finish)._--Apply two or three coats of white
shellac; rub down with pumice and raw linseed-oil, and clean off well
with rags; use varnish-polish on the panels.

_Another._--Finish as in the previous recipe. For a flowing coat of
varnish-finish apply one flowing coat of light amber varnish. If a
varnish-polish is desired, apply three coats of Zanzibar polishing
varnish. Rub down and polish, and the result will be a splendid finish.

_Mahogany or Cherry Wood._--For shellac _dead finish_ apply two coats of
yellow shellac. Rub down with pumice and raw linseed-oil. If a
varnish-finish is desired, apply a flowing coat of light amber varnish
or shellac thus rubbed. The panels should receive two coats of Zanzibar
polishing varnish.

_Oak._--For a _dead finish_ give three coats of shellac, two-thirds of
white and one-third of yellow, mixed. Rub down with pumice and raw
linseed-oil. For a cheap varnish-finish give one flowing coat of light
amber varnish in the shellac, rubbed as directed. Varnish-polish the
panels.

_Rosewood, Coromandel, or Kingwood (a Bright Finish)._--Apply two thin
coats of shellac, sand-papering each coat; then apply three or four
coats of Zanzibar polishing varnish, laying it on thin, and giving it
sufficient time to dry thoroughly. When it is perfectly hard, rub down
with pumice and water. Polish with rotten-stone to a fine lustre, clean
up with sweet-oil, and vapour up the oil with a damp alcohol rag. The
result is a splendid mirror-like polish. This is the method employed in
polishing pianofortes in America.

_Walnut._--For a cheap finish, apply one coat of yellow shellac. When
dry, sand-paper down. Apply with brush; rub in well; clean off with
rags. This gives a very fair finish.

For a medium _dead finish_ apply two or three coats of yellow shellac.
When dry, rub down with pumice and raw linseed-oil; clean up well;
varnish-polish the panels.

For _finish._ Before using the above filling, give the work one coat of
white shellac. When dry, sand-paper down, and apply the above filling.
Give two coats of white shellac; rub down with pumice and raw
linseed-oil; clean up well with brown japan and spirits of turpentine,
mixed. Wipe off. This is a good imitation of wax-finish; it is
waterproof, and will not spot as wax-finish does. The panels are to be
varnished-polished. This is to be used with the improved filling No. 2.

For _finish._ Apply three coats of yellow shellac; rub down with pumice
and raw linseed-oil; clean off well. Varnish-polish the panels. Use this
with the oil colour No. 3.


=Finishing Cheap Work.=--_With One Coat of Varnish._--Give the work a
coat of boiled linseed-oil; immediately sprinkle dry whiting upon it,
and rub it well in with tow all over the surface. The whiting absorbs
the oil and completely fills the pores of the wood. For black walnut add
a little dry burnt umber. For mahogany or cherry add a little Venetian
red, according to the colour of the wood. The application can be made to
turned work while in motion in the lathe. Clean off well with rags. The
work can then be finished with a single coat of varnish, and for cheap
work makes a very good finish.

For varnishing large surfaces, a two-inch oval varnish brush is to be
used first to lay out the varnish, and then a two-inch flat badger
flowing-brush for a softener. The latter lays down moats and bubbles
left by the large brush. A perfectly smooth glass-like surface is thus
obtained. When not in use, these tools should be put into a pot
containing raw linseed-oil and spirits of turpentine. This keeps them in
a better working condition than if they are kept in varnish, making them
clean and soft. Standing in varnish they congeal and become hard as the
spirit evaporates from the varnish. For shellacing a large surface use a
two-inch bristle brush; for small work, such as carvings and mouldings,
use a one-and-a-half inch flat brush. These brushes when not in use
should be taken from the various pots and deposited in an earthen pot
sufficiently large to hold all the shellac brushes used in the shop. Put
in enough of raw linseed-oil and thin shellac to cover the bristles of
the brushes. Kept in this manner, they will remain clean and elastic,
and will wear much longer.

_Wax Finishing._--Take 1/2 gall. of turpentine, 11/2 lb. yellow
beeswax, 1 lb. white beeswax, 1/2 lb. white rosin. Pulverise the rosin,
and shave the wax into fine shavings. Put the whole into the turpentine,
and dissolve it cold. If dissolved by a fire-heat, the vitality of the
wax is destroyed. When it is thoroughly dissolved, mix well and apply
with a stiff brush. Rub well in, and clean off with rags. When dry, it
is ready for shellac or varnish as may be desired.

_A Varnish Polish._--Take 10 oz. gum shellac, 1 oz. gum sandarach, 1
drachm Venice turpentine, 1 gall. alcohol. Put the mixture into a jug
for a day or two, shaking occasionally. When dissolved it is ready for
use. Apply a few coats. Polish by rubbing smooth.

For the commonest kind of work in black walnut a very cheap polish can
be made in the following manner: Take 1 gall. of turpentine, 2 lb.
pulverised asphaltum, 1 qt. boiled linseed-oil, 2 oz. Venetian red. Put
the mixture in a warm place and shake occasionally. When it is
dissolved, strain and apply to the wood with a stiff brush. Rub well
with cloth when dry. Then take 1 pt. of thin shellac, 1/2 pt. boiled
linseed-oil. Shake it well before using. Apply with cloth, rubbing
briskly, and you will have a fine polish.

_With Copal or Zanzibar Varnish._--As a substitute for filling, the wood
may receive one coat of native coal-oil, thinned with benzine-spirits;
then apply one coat of shellac, and follow with varnish, as desired. The
time is not far distant when manufacturers must and will use varnish for
the finishing of all kinds of furniture on account of the high price of
shellac. Furniture finished in the last-named method may be rubbed with
either water or oil. Water has a tendency to harden varnish, while oil
softens it. If water is used there will be a saving of oil and rags. In
the other case shellac, when rubbed with oil, should be cleaned with
japan. This removes the greasy and cloudy appearance which is left after
the rubbing with oil, and the work will have a clean, dry, and brighter
appearance than otherwise.

We suggest another idea for finishing black walnut for a cheap or a
medium class of work. In the first place, fill the pores of the wood,
and apply one thin coat of shellac to hold the filling in the pores of
the wood. Let this stand one day; sand-paper down with fine paper, then
with a brush apply a coat of coach japan. Rub well, and clean off with
rags. Let this stand one day to dry, then, with some sand-paper that has
been used before, take off the moats from the japan. Go over the whole
surface with a soft rag saturated with japan; wipe and clean off
carefully, and the job is finished. This, though a cheap finish, is a
good one for this class of work.

We give one more method of finishing black walnut, that is, with boiled
linseed-oil only, and there is no other way of obtaining a genuine
oil-finish. Sand-paper the wood down smoothly; apply a coat of boiled
linseed-oil over the whole surface; sand-paper well, and clean up dry
with rags; let it stand one day to dry, then apply one more coat of oil;
rub well in with rags, but do not use sand-paper on this coat. Apply
three, four, or more coats in the same way. When the work has received
the last coat of oil and is dry, sand-paper down with old paper. Then
clean up with the best coach japan with rags, and let the work stand one
day to dry. The panels are to be varnish-polished the same as other
wood. The work is then finished, and ready for the warerooms.

This method takes a longer time than finishing with either varnish or
shellac; but the cost is less both for materials and for labour, the
workman being able to go over a greater surface in the same time. The
work will stand longer, and the method gives a rich and close finish,
bringing out the figure and rich colour of the wood better than in any
other method of finishing. It does not cost so much as shellac finish;
it only requires a little more time for drying between the coats of oil.
In finishing in varnish or shellac, to get the body or surface for
polishing three or four coats are frequently applied, which is liable to
produce a dull cloudy appearance. For this reason, and having in view
the high and increasing price of stock, it seems to us that this really
superior method of finishing in oil must take the place of shellac and
varnish-finish in good work.


=Polishing Varnish.=--This is certainly a tedious process, and
considered by many a matter of difficulty. The following is the mode of
procedure: Put two ounces of powdered tripoli into an earthen pot or
basin, with water sufficient to cover it; then, with a piece of fine
flannel four times doubled, laid over a piece of cork rubber, proceed to
polish your varnish, always wetting it well with the tripoli and water.
You will know when the process is complete by wiping a part of the work
with a sponge and observing whether there is a fair and even gloss.
Clean off with a bit of mutton suet and fine flour. Be careful not to
rub the work too hard, or longer than is necessary to make the face
perfectly smooth and even. Some workmen polish with rotten-stone, others
with putty-powder, and others with common whiting and water; but
tripoli, we think, will be found to answer best.


=An American Polish Reviver.=--Take of olive-oil 1 lb., of rectified oil
of amber 1 lb., spirits of turpentine 1 lb., oil of lavender 1 oz.,
tincture of alkanet-root 1/2 oz. Saturate a piece of cotton batting with
this polish, and apply it to the wood; then, with soft and dry cotton
rags, rub well and wipe off dry. This will make old furniture in private
dwellings, or that which has been shop-worn in warerooms, look as well
as when first finished. The articles should be put into a jar or jug,
well mixed, and afterwards kept tightly corked.

This is a valuable recipe, and is not known, the writer believes,
outside of his practice.




CHAPTER X.

_MISCELLANEOUS RECIPES._


=Oil Polish.=--One quart of cold-drawn linseed-oil to be simmered (not
boiled) for ten minutes, and strained through flannel; then add
one-eighth part of spirits of turpentine: to be applied daily with soft
linen rags, and rubbed off lightly; each time the oil is applied the
surface should be previously washed with cold water, so as to remove any
dirt or dust. This method of polishing is particularly useful for
dining-table tops; it will in about six weeks produce a polish so
durable as to resist boiling water or hot dishes, and be like a mirror
for brilliancy.


=Wax Polish.=--Eight ounces of beeswax, 2 oz. of resin, and 1/2 oz. of
Venetian turpentine, to be melted over a slow fire; the mass, when quite
melted, is poured into a sufficiently large stone-ware pot, and while it
is still warm 6 oz. of rectified turpentine are stirred in. After the
lapse of twenty-four hours the mass will have assumed the consistency
of soft butter, and is ready for use. A small portion of the polish is
taken up with a woollen rag and rubbed over the surface of the work--at
first gently, then more strongly. When the polish is uniformly laid on,
the surface is once more rubbed lightly and quickly with a fresh clean
rag to produce a gloss.


=Waterproof French Polish.=--Take 2 oz. gum benjamin, 1/2 oz. gum
sandarach, 1/2 oz. gum anime, 11/2 oz. gum benzoin, and 1 pt. alcohol.
Mix in a closely-stoppered bottle, and put in a warm place till the gums
are well dissolved. Then strain off, and add 1/4 gill of poppy-oil.
Shake well together, and it is ready for use.


=A Varnish for Musical Instruments.=--Take one gallon of alcohol, 1 lb.
gum sandarach, 1/2 lb. gum mastic, 2 lbs. best white resin, 3 lbs. gum
benzoin; cut the gums cold. When they are thoroughly dissolved, strain
the mixture through fine muslin, and bottle for use; keep the bottle
tightly corked. This is a beautiful varnish for violins and other
musical instruments of wood, and for fancy articles, such as those of
inlaid work. It is also well adapted for panel-work, and all kinds of
cabinet furniture. There is required only one flowing coat, and it
produces a very fine mirror-like surface. Apply this varnish with a
flat camel's-hair or sable brush. In an hour after application the
surface is perfectly dry.


=French Varnish for Cabinet-work.=--Take of shellac 11/2 oz. gum mastic
and gum sandarach, of each 1/2 oz., spirit of wine by weight 20 oz. The
gums to be first dissolved in the spirit, and lastly the shellac. This
may be best effected by means of the water-bath. Place a loosely-corked
bottle containing the mixture in a vessel of warm water of a temperature
below the boiling point, and let it remain until the gums are dissolved.
Should evaporation take place, an equal quantity to the spirit of wine
so lost must be replaced till the mixture settles, then pour off the
clear liquid for use, leaving the impurities behind; but do not filter
it. Greater hardness may be given to the varnish by increasing the
quantity of shellac, which may be done to the amount of one-twelfth of
the lac to eleven-twelfths of spirit. But in this latter proportion the
varnish loses its transparency in some degree, and must be laid on in
very small quantities at a time.


=Mastic Varnish.=--Mastic should be dissolved in oil of turpentine, in
close glass vessels, by means of a gentle heat. This varnish is
extensively used in transparencies, etc.


=Cabinet-maker's Varnish.=--Take 5 lbs. very pale gum shellac, 7 oz. gum
mastic, 1 gallon alcohol. Dissolve in a cold atmosphere with frequent
stirring.


=Amber Varnish.=--This is a most difficult varnish to make. It is
usually prepared by roasting the amber and adding hot linseed-oil, after
which turpentine can be mixed if required. But for a small quantity,
dissolve the broken amber, without heat, in the smallest possible
quantity of chloroform or pure benzine. Heat the linseed-oil, remove it
from the fire, and pour in the amber solution, stirring all the time.
Then add the turpentine. If not quite clear, heat again, using the
utmost caution.


=Colourless Varnish with Copal.=--To prepare this varnish the copal must
be picked; each piece is broken, and a drop of rosemary-oil poured on
it. Those pieces which, on contact with the oil, become soft are the
ones used. The pieces being selected, they are ground and passed through
a sieve, being reduced to a fine powder. It is then placed in a glass,
and a corresponding volume of rosemary-oil poured over it; the mixture
is then stirred for a few minutes until it is transformed into a thick
liquor. It is then left to rest for two hours, when a few drops of
rectified alcohol are added, and intimately mixed. Repeat the operation
until the varnish is of a sufficient consistency; leave the rest for a
few days, and decant the clear. This varnish can be applied to wood and
metals (_Journal of Applied Chemistry_).


=Seedlac Varnish.=--Wash 3 oz. of seedlac in several waters; dry it and
powder it coarsely. Dissolve it in one pint of rectified spirits of
wine; submit it to gentle heat, shaking it as often as convenient, until
it appears dissolved. Pour off the clear part, and strain the remainder.


=Patent Varnish for Wood or Canvas.=--Take 1 gallon spirits of
turpentine, 21/4 lbs. asphaltum. Put them into an iron kettle on a
stove, and dissolve the gum by heat. When it is dissolved and a little
cool, add 1 pint copal varnish and 1 pint boiled linseed-oil. When
entirely cool it is ready for use. For a perfect black add a little
lamp-black.


=Copal Varnish.=--Dissolve the copal, broken in pieces, in linseed-oil,
by digestion, the heat being almost sufficient to boil the oil. The oil
should be made drying by the addition of quick-lime. This makes a
beautiful transparent varnish. It should be diluted with oil of
turpentine; a very small quantity of copal, in proportion to the oil,
will be found sufficient.


=Carriage Varnish.=--Take 19 oz. gum sandarach, 91/2 oz. orange
shellac, 121/2 oz. white resin, 18 oz. turpentine, 5 pints alcohol.
Dissolve and strain. Use for the internal parts of carriages and similar
purposes. This varnish dries in ten minutes.


=Transparent Varnish.=--Take 1 gallon alcohol, 2 lbs. gum sandarach, 1/2
lb. gum mastic. Place them in a tin can. Cork tight and shake
frequently, placing the can in a warm place. When dissolved it is ready
for use.


=Crystal Varnish for Maps, etc.=--Mix together 1 oz. Canada balsam and 2
oz. spirits of turpentine. Before applying this varnish to a drawing or
a painting in water-colours the paper should be placed on a stretcher,
sized with a thin solution of isinglass in water, and dried. Apply the
varnish with a soft camel's-hair brush.


=A Black Varnish.=--Mix a small quantity of gas-black with the brown
hard varnish previously mentioned. The black can be obtained by boiling
a pot over a gas-burner, so that it almost touches the burner, when a
fine jet-black will form at the bottom, which remove and mix with the
varnish, and apply with a brush.


=A Black Polish= can be made in the same way: after wetting the rubber,
just touch it with the black. Place the linen cover over, touch it with
oil, and it is ready for work.


=Varnish for Iron.=--Take 2 lbs. pulverised gum asphaltum, 1/4 lb. gum
benzoin, 1 gallon spirits of turpentine. To make this varnish quickly,
keep in a warm place, and shake often till it is dissolved. Shade to
suit with finely-ground ivory-black. Apply with a brush. This varnish
should be used on iron-work exposed to the weather. It is also well
adapted for inside work, such as iron furniture, where a handsome polish
is desired.


=Varnish for Tools.=--Take 2 oz. tallow, 1 oz. resin; melt together, and
strain while hot to remove the specks which are in the resin. Apply a
slight coat on the tools with a brush, and it will keep off the rust for
any length of time.


=To Make Labels Adhere to a Polished Surface.=--Brush the back of a
label over with thin varnish or polish, and press down with a soft rag;
this must be done quickly, as the polish soon becomes dry. This is the
way labels are put on pianofortes, and also the paper imitation of fancy
woods on polished pine-work.


=How to Remove French Polish or Varnish from Old Work.=--Cleaning off
old work for re-polishing or varnishing is usually found difficult, and
to occupy much time if only the scraper and glass-paper be used. It can
be easily accomplished in a very short time by washing the surface with
liquid ammonia, applied with a piece of rag; the polish will peel off
like a skin, and leave the wood quite bare. In carvings or turned work,
after applying the ammonia, use a hard brush to remove the varnish.
Unadulterated spirits of wine used in a tepid state will answer the same
purpose.


=Colouring for Carcase Work.=--In the best class of cabinet-work all the
inside work--such as carcase backs, shelves, etc.--is made of good
materials, such as wainscot, soft mahogany, Havannah cedar, or American
walnut; but for second-class work, pine or white deal is used instead,
and coloured.

The colouring matter used should match with the exterior wood. For
mahogany take 1/2 lb. of ground yellow ochre to a quart of water, and
add about a tablespoonful of Venetian red--a very small quantity of
red in proportion to the yellow is sufficient for mahogany--and a piece
of glue about the size of a walnut; the whole to be well stirred and
boiled. Brush over while hot, and immediately rub off with soft shavings
or a sponge. For the antique hues of old wainscot mix equal parts of
burnt umber and brown ochre. For new oak, bird's-eye maple, birch,
satin-wood, or any similar light yellowish woods, whiting or white-lead,
tinted with orange chrome, or by yellow ochre and a little size. For
walnut, brown umber, glue size, and water; or by burnt umber very
moderately modified with yellow ochre. For rosewood, Venetian red tinted
with lamp-black. For ebony, ivory-black; but for the common ebonised
work lamp-black is generally used.

When the colouring is dry, it should be rubbed down with a piece of worn
fine glass-paper, and polished with beeswax rubbed on a very hard
brush--a worn-out scrubbing-brush is as good as anything--or it can be
well rubbed with Dutch rush. In polishing always rub the way of the
grain. The cheap work seldom gets more than a coat of colour rubbed off
with shavings.


=Cheap but Valuable Stain for the Sap of Black Walnut.=--Take 1 gallon
of strong vinegar, 1 lb. dry burnt umber, 1/2 lb. fine rose-pink, 1/2
lb. dry burnt Vandyke brown. Put them into a jug and mix them well; let
the mixture stand one day, and it will then be ready for use. Apply this
stain to the sap with a piece of fine sponge; it will dry in half an
hour. The whole piece is then ready for the filling process. When
completed, the stained part cannot be detected even by those who have
performed the work. This recipe is of value, as by it wood of poor
quality and mostly of sap can be used with good effect.


=Polish for Removing Stains, etc., from Furniture (American).=--Take 1/2
pint alcohol, 1/4 oz. pulverised resin, 1/4 oz. gum shellac, 1/2 pint boiled
linseed-oil. Shake the mixture well, and apply it with a sponge, brush,
or cotton flannel, rubbing well after the application.


=Walnut Stain to be used on Pine and White-wood.=--Take 1 gallon of very
thin sized shellac; add 1 lb. of dry burnt umber, 1 lb. of dry burnt
sienna, and 1/4 lb. of lamp-black. Put these articles into a jug, and
shake frequently until they are mixed. Apply one coat with a brush. When
the work is dry, sand-paper down with fine paper, and apply one coat of
shellac or cheap varnish. It will then be a good imitation of solid
walnut, and will be adapted for the back-boards of mirror-frames, for
the backside and inside of case-work, and for similar work.


=Rosewood Stain.=--Take 1 lb. of logwood chips, 1/2 lb. of red-sanders,
1/2 gallon of water. Boil over a fire until the full strength is
obtained. Apply the mixture, while hot, to the wood with a brush. Use
one or two coats to obtain a strong red colour. Then take 1 gallon of
spirits of turpentine and 2 lb. of asphaltum. Dissolve in an iron kettle
on a stove, stirring constantly. Apply with a brush over the red stain,
to imitate rosewood. To make a perfect black, add a little lamp-black.
The addition of a small quantity of varnish with the turpentine will
improve it. This stain applied to birchwood gives as good an imitation
of rosewood as on black walnut, the shade on the birch being a little
brighter.


=Rosewood Stain for Cane Work, etc.=--Take 1 gallon alcohol, 1 lb.
red-sanders, 1 lb. dragon's blood, 1 lb. extract logwood, 1/2 lb. gum
shellac. Put the mixture into a jug, and steep well till it obtains its
full strength. Then strain, and it will be ready for use. Apply with
brush, giving one, two, or more coats, according to the depth of colour
desired. Then give one or more coats of varnish. This stain is suitable
for use on cane, willow, or reed work, and produces a good imitation of
rosewood.


=French Polish Reviver.=--This recipe will be found a valuable one. If
the work is sweated and dirty, make it tolerably wet, and let it stand a
few minutes; then rub off and polish with a soft rag. It is important
that the ingredients should be mixed in a bottle in the order as given:
Vinegar, 1 gill; methylated spirit, 1 gill; linseed-oil, 1/2 pint;
butter of antimony (poison), 1 oz. Raw linseed-oil, moderately thinned
with turpentine or spirits of wine, will also make a good reviver. Old
furniture, or furniture that has been warehoused for a long time, should
be washed with soda and warm water previous to applying the reviver.


=Morocco Leather Reviver.=--The coverings of chairs or sofas in morocco,
roan, or skiver can be much improved by this reviver. If old and greasy,
wash with sour milk first. The reviver should be applied with a piece of
wadding, and wiped one way only, as in glazing. The colour can be
matched by adding red-sanders. Methylated spirit, 1/2 pint; gum benzoin,
2 oz.; shellac, 1/2 oz. Mix, and shake up occasionally until dissolved.


=Hair-cloth Reviver.=--Mix equal parts of marrow-oil (neats-foot),
ox-gall. and ivory-black, to be well rubbed with a cloth. This
composition forms a valuable renovator for old hair-cloth.


=To Remove Grease Stains from Silks, Damasks, Cloth, etc.=--Pour over
the stain a small quantity of benzoline spirit, and it will soon
disappear without leaving the least mark behind. The most delicate
colours can be so treated without fear of injury. For paint stains
chloroform is very efficacious.


=To Remove Ink Stains from White Marble.=--Make a little chloride of
lime into a paste with water, and rub it into the stains, and let it
remain a few hours; then wash off with soap and water.




CHAPTER XI.

_MATERIALS USED._


=Alkanet-root= (botanical name, _Anchusa tinctoria_).--This plant is a
native of the Levant, but it is much cultivated in the south of France
and in Germany. The root is the only part used by French polishers to
obtain a rich quiet red; the colouring is chiefly contained in the bark
or outer covering, and is easily obtained by soaking the root in spirits
or linseed-oil. The plant itself is a small herbaceous perennial, and
grows to about a foot in height, with lance-shaped leaves and purple
flowers, and with a long woody root with a deep red bark.


=Madder-root= (_Rubia tinctoria_).--This plant is indigenous to the
Levant; but it is much cultivated in Southern Europe, and also in India.
Its uses are for dyeing and staining; it can be procured in a powdered
state, and imparts its red colour when soaked in water or spirits. This
is a creeping plant with a slender stem; almost quadrangular, the
leaves grow four in a bunch; flowers small, fruit yellow, berry double,
one being abortive. The roots are dug up when the plant has attained the
age of two or three years; they are of a long cylindrical shape, about
the thickness of a quill, and of a red-brownish colour, and when
powdered are a bright Turkish-red. Extracts of madder are mostly
obtained by treating the root with boiling water, collecting the
precipitates which separate on cooling, mixing them with gum or starch,
and adding acetate of alumina or iron. This is in fact a mixture of
colouring matter and a mordant.


=Red-sanders= (_Pterocarpus santalinus_).--The tree from which this wood
is obtained is a lofty one, and is to be found in many parts of India,
especially about Madras. It yields a dye of a bright garnet-red colour,
and is used by French polishers for dyeing polishes, varnishes,
revivers, etc.


=Logwood= (_Haematoxylon campeachianum_).--This is a moderate-sized tree
with a very contorted trunk and branches, which are beset with sharp
thorns, and blooms with a yellow flower. It is a native of Central
America and the West Indies. This valuable dye-wood is imported in logs;
the heart-wood is the most valuable, which is cut up into chips or
ground to powder for the use of dyers by large powerful mills
constructed especially for the purpose. Logwood, when boiled in water,
easily imparts its red colour. If a few drops of acetic acid (vinegar)
is added, a bright red is produced; and when a little alum is added for
a mordant, it forms red ink. If an alkali, such as soda or potash, is
used instead of an acid, the colour changes to a dark blue or purple,
and with a little management every shade of these colours can be
obtained. Logwood put into polish or varnish also imparts its red
colour.


=Fustic= (_Maclura tinctoria_).--This tree is a native of the West
Indies, and imparts a yellow dye. Great quantities are used for dyeing
linens, etc. The fustic is a large and handsome evergreen, and is
imported in long sticks.


=Turmeric= (_Curcuma longa_).--Turmeric is a stemless plant, with
palmated tuberous roots and smooth lance-shaped leaves. It is imported
from the East Indies and China. The root is the part which affords the
yellow powder for dyeing. It is also a condiment, and is largely used in
Indian curry-powder. Paper stained with turmeric is used by chemists as
a test for alkalies, and it is also used in making Dutch, pink, and
gold-coloured varnishes.


=Indigo= (_Indigofera tinctoria_).--Indigo is a shrub which grows from
two to three feet in height, and is cut down just as it begins to
flower. It is cultivated in almost all the countries situated in the
tropics. The dye substance is prepared from the stems and leaves, and is
largely used in calico-printing.


=Persian Berries= (_Rhamnus infectorius_).--These berries are the
produce of a shrub of a species of buckthorn common in Persia, whence
they derive their name; but large quantities are also imported into
England from Turkey and the south of France. The berries are gathered in
an unripe state, and furnish a yellow dye.


=Nut-galls.=--These are found upon the young twigs of the Turkish dwarf
oak (_Quercus infectoria_), and are produced by the puncture of an
insect called Cynips. The supply is principally from Turkey and Aleppo.
Nut-galls contain a large quantity of tannin and gallic acid, and are
extensively used in dyeing.


=Catechu.=--This is obtained from the East Indies, and is the extract of
the _Acacia catechu_, a thorny tree. The wood is cut up into chips
similar to logwood, and after boiling and evaporation the liquor
assumes the consistency of tar; but when cold it hardens, and is formed
into small squares. It is extensively used by tanners in place of oak
bark.


=Thus.=--Thus is the resin which exudes from the spruce-fir, and is used
by some polishers in the making of polishes and varnishes.


=Sandarach= is the produce of the _Thuya articulata_ of Barbary. It
occurs in small pale yellow scales, slightly acid, and is soluble in
alcohol; it is used in both polishes and varnishes.


=Mastic= exudes from the mastic-tree (_Pistacia lentiscus_), and is
principally obtained from Chios, in the Grecian Archipelago. It runs
freely when an incision is made in the body of the tree, but not
otherwise. It occurs in the form of nearly colourless and transparent
tears of a faint smell, and is soluble in alcohol as well as oil of
turpentine, forming a rapidly-drying but alterable varnish, which
becomes brittle and dark-coloured by age.


=Benzoin.=--This is the produce of the American tree _Laurus benzoin_,
and also of the _Styrax benzoin_ of Sumatra, which is called "gum
benjamin"; it is used in polishes and varnishes, and as a cosmetic, and
is also burnt as incense in Catholic churches.


=Copal= is one of the most valuable of gums, and is furnished by many
countries in the districts of Africa explored by Mr. H. M. Stanley, the
discoverer of Livingstone. Copal is found in a fossil state in very
large quantities. The natives collect the gum by searching in the sandy
soil, mostly in the hilly districts, the country being almost barren,
with no large tree except the Adansonia, and occasionally a few thorny
bushes.

The gum is dug out of the earth by the copal gatherers at various
depths, from two or three to ten or more feet, in a manner resembling
gold-digging; and great excitement appears when a good amount is
discovered. The gum is found in various shapes and sizes, resembling a
hen's egg, a flat cake, a child's head, etc. There are three kinds,
yellow, red, and whitish; and the first furnishes the best varnish and
fetches the highest price from the dealers. Many of the natives assert
that the copal still grows on different trees, and that it acquires its
excellent qualities as a resin by dropping off and sinking several feet
into the soil, whereby it is cleansed, and obtains, after a lapse of
many years, its hardness, inflammability, and transparency.


=Dragon's Blood= is the juice of certain tropical plants of a red
colour, especially of the tree _Pterocarpus draco_. After the juice is
extracted, it is reduced to a powder by evaporation. It is used for
darkening mahogany, colouring varnishes or polishes, etc., and for
staining marble. Chemists also use it in preparing tinctures and tooth
powders.


=Shellac=--or, more properly, _gum-lac_--is a resinous substance
obtained from the Bihar-tree, and also from the _Ficus Indica_, or
Banyan-tree. It exudes when the branches are pierced by an insect called
the _Coccus ficus_. The twigs encrusted with the resin in its natural
state is called Stick-lac. When the resin is broken off the twigs,
powdered, and rubbed with water, a good deal of the red colouring matter
is dissolved, and the granular resin left is called seed-lac; and when
melted, strained, and spread into thin plates it is called shellac, and
is prepared in various ways and known by the names of button, garnet,
liver, orange, ruby, thread, etc., and is used for many purposes in the
arts. Shellac forms the principal ingredient for polishes and spirit
varnishes. Red sealing-wax is composed of shellac, Venice turpentine,
and vermilion red; for the black sealing-wax ivory-black is used instead
of the vermilion. Shellac is soluble in alcohol, and in many acids and
alkalies. Lac-dye is the red colour from the stick-lac dissolved by
water and evaporated to dryness. The dye, however, is principally from
the shrivelled-up body of the insect of the Stick-lac.

Shellac is produced in the largest quantity and the best quality in
Bengal, Assam, and Burmah. The chief seat of manufacture is Calcutta,
where the native manufacturers are accused of adulterating it with resin
to a considerable extent. The best customers are Great Britain and the
United States, though the demand in the Italian markets appears to be on
the increase.


=Amber= is a yellow, semi-transparent, fossil resin; hard but brittle,
and easily cut with a knife; tasteless, and without smell, except when
pounded or heated, and then it emits a fragrant odour. It has
considerable lustre; becomes highly electric by friction; and will burn
with a yellow flame. It is found in nodules of various sizes in alluvial
soils, or on the seashore in many places, particularly on the shores of
the Baltic. Amber is much employed for ornamental purposes, and is also
used in the manufacture of amber-varnish. It will not dissolve in
alcohol, but yields to the concentrated action of sulphuric acid, which
will dissolve all resins except caramba wax.


=Pumice-stone.=--This well-known light and spongy volcanic substance is
extensively quarried in the small islands that lie off the coast of
Sicily. Its porosity and smooth-cutting properties render it of great
value to painters and polishers for levelling down first coatings.
Ground pumice-stone is the best for cutting down bodies of polish or
varnish that are more advanced towards completion. The best way to get a
surface to a piece of lump pumice-stone is to rub it down on a flat York
stone, or, better still, an old tile that has been well baked.
Pumice-stone should not be allowed to stand in water; it causes the
grain to contract and to harden, thereby deteriorating its cutting
properties.


=Linseed-oil.=--This valuable oil is obtained by pressure from the seed
of the flax plant (_Linum usitatissimum_). Linseed contains on an
average about 33 per cent. of oil, though the amount varies materially,
the percentage obtained fluctuating considerably, not being alike on any
two successive days. This is partly due to the varying richness of the
seed, and partly to the manner in which it is manipulated in extracting
the oil, it being a very easy matter to lose a considerable percentage
of the oil by a lack of skill in any of the processes, though they all
seem so simple.

The first thing done with the seed from which the oil is to be extracted
is to pass it through a screen, to cleanse it from foreign substances.
The seed is received in bags containing from three to four bushels, and
pockets containing one-sixth of that amount. Having been screened it is
passed through a mill, whose large iron-rollers, three in number, grind
it to a coarse meal. Thence it is carried to what are known as the
"mullers," which are two large stones, about eight feet in diameter and
eighteen inches thick, weighing six tons each, standing on their edges,
and rolling around on a stone bed. About five bushels of the meal are
placed in the mullers, and about eight quarts of hot water are added.
The meal is afterwards carried by machinery to the heaters, iron pans
holding about a bushel each. These are heated to an even temperature by
steam, and are partly filled with the meal, which for seven minutes is
submitted to the heat, being carefully stirred in order that all parts
may become evenly heated. At the end of that time the meal is placed in
bags, which in turn are placed in hydraulic presses, iron plates being
placed between the bags. Pressure is applied for about eight minutes,
until, as is supposed, all the oil is pressed out, leaving a hard cake,
known to the trade as oil-cake, or linseed-cake.

The product of these various processes is known as "raw" oil, a
considerable portion of which is sold without further labour being
expended upon it. There is, however, a demand for "boiled" oil, for
certain purposes where greater drying properties are needed. To supply
this want oil is placed in large kettles, holding from five hundred to
one thousand gallons, where it is heated to a temperature of about 500
degrees, being stirred continually. This process, when large kettles are
used, requires nearly the entire day. While the boiling process is going
on, oxide of manganese is added, which helps to give the boiled oil
better drying properties. A considerable portion of the oil is bleached,
for the use of manufacturers of white paints.


=Venice Turpentine.=--This is obtained from the larch, and is said to be
contained in peculiar sacs in the upper part of the stem, and to be
obtained by puncturing them. It is a ropy liquid, colourless or brownish
green, having a somewhat unpleasant odour and bitter taste.


=Oil of Turpentine= is the most plentiful and useful of oils. It is
obtained in America from a species of pine very plentiful in the
Carolinas, Georgia, and Alabama, known as the long-leaved pine (_pinus
Australis_), and found only where the original forest has not been
removed.


=Methylated Spirits.=--The methylated spirit of commerce usually
consists of the ordinary mixed grain, or "plain" spirit, as produced by
the large distillers in London and elsewhere, with which are blended,
by simply mixing in various proportions, one part vegetable naphtha and
three parts spirits of wine. The mixing takes place in presence of a
revenue officer, and the spirits so "methylated" are allowed to be used
duty free. The revenue authorities consider the admixture of naphtha,
having so pungent and disagreeable a smell, a sufficient security
against its sale and consumption as a beverage. No process has yet been
discovered of getting rid of this odour. It is illegal for druggists to
use it in the preparation of medicinal tinctures, unless they are for
external use.


PRINTED BY WILLIAM CLOWES AND SONS, LIMITED, LONDON AND BECCLES.




CROSBY LOCKWOOD & SON'S

LIST OF WORKS

ON

TRADES AND MANUFACTURES, THE INDUSTRIAL ARTS, CHEMICAL MANUFACTURES,
COUNTING HOUSE WORK, ETC.


A Complete Catalogue of NEW and STANDARD BOOKS relating to CIVIL,
MECHANICAL, MARINE and ELECTRICAL ENGINEERING; MINING, METALLURGY, and
COLLIERY WORKING; ARCHITECTURE and BUILDING; AGRICULTURE and ESTATE
MANAGEMENT, etc. Post Free on Application.

7, STATIONERS' HALL COURT, LONDON, E.C.,
AND
121a, VICTORIA STREET, WESTMINSTER, S.W.

1910.




LIST OF WORKS

ON

TRADES and MANUFACTURES, THE INDUSTRIAL ARTS, Etc.


=ACETYLENE, LIGHTING BY.= Generators, Burners, and Electric Furnaces. By
WILLIAM E. GIBBS, M.E. With 66 Illustrations. Crown 8vo, cloth =7/6=

=AIR GAS LIGHTING SYSTEMS.= See PETROL GAS.

=ALCOHOL (INDUSTRIAL): ITS MANUFACTURE AND USES.= A Practical Treatise
based on Dr. Max Maercker's "Introduction to Distillation," as revised
by Drs. DELBRUCK and LANGE. By J. K. BRACHVOGEL. 500 pages, 105
engravings _Net_ =16/6=

THE INDUSTRIAL VALUE OF TAX-FREE ALCOHOL AND WHAT IT MEANS TO
AGRICULTURAL INTERESTS--SUMMARY OF THE PROCESSES IN SPIRIT
MANUFACTURE--STARCH, HOW FORMED, ITS CHARACTERISTICS, AND THE CHANGES
IT UNDERGOES--ENZYMES OR FERMENTS--PRODUCTS OF FERMENTATION--STARCHY
AND SACCHARIFEROUS RAW MATERIALS--PREPARATION OF THE MALT--STEAMING
THE RAW MATERIAL--THE MASHING PROCESS--FERMENTING THE MASH--PREPARATION
OF ARTIFICIAL YEAST IN THE DISTILLERY--FERMENTATION IN
PRACTICE--DISTILLATION AND RECTIFICATION--ARRANGEMENT OF THE
DISTILLERY--THE SPENT WASH--DENATURING OF ALCOHOL--ALCOHOL FOR THE
PRODUCTION OF POWER, HEATING AND ILLUMINATION--STATISTICS.

=ALKALI TRADE MANUAL.= Including the Manufacture of Sulphuric Acid,
Sulphate of Soda, and Bleaching Powder. By JOHN LOMAS, Alkali
Manufacturer. With 232 Illustrations. Super-royal 8vo, cloth. =L1 10s.=

=BLOWPIPE IN CHEMISTRY, MINERALOGY, Etc.= Containing all known Methods
of Anhydrous Analysis, many Working Examples, and Instructions for
Making Apparatus. By Lieut.-Colonel W. A. Ross, R.A., F.G.S. Second
Edition. Crown 8vo, cloth =5/0=

=BOOT AND SHOE MAKING=, including Measurement, Last-fitting,
Cutting-out, Closing and Making, with a Description of the most Approved
Machinery employed. By J. B. LENO. Crown 8vo, cloth =2/0=

=BRASS FOUNDER'S MANUAL.= Modelling, Pattern Making, Moulding, Turning,
&c. By W. GRAHAM. Crown 8vo, cloth =2/0=

=BREAD & BISCUIT BAKER'S & SUGAR-BOILER'S ASSISTANT.= Including a large
variety of Modern Recipes. By ROBERT WELLS. Fifth Edition.
Crown 8vo, cloth 1/0

     "A large number of wrinkles for the ordinary cook, as well as the
     baker."--_Saturday Review._

=BREAKFAST DISHES. For every Morning of Three Months.= By Miss
ALLEN (Mrs. A. MACAIRE). Author of "Savouries and Sweets," &c.
Twenty-third Edition. F'cap 8vo. Sewed   1/0
     Or, quarter bound, fancy boards     1/6

=BREWERS, HANDY BOOK FOR.= Being a Practical Guide to the Art of Brewing
and Malting. Embracing the Conclusions of Modern Research which bear
upon the Practice of Brewing. By H. E. WRIGHT, M.A. Third
Edition. Thoroughly Revised and Enlarged. Large Crown 8vo, 578 pp.,
cloth _Net_ =12/6=

BARLEY, MALTING AND MALT--WATER FOR BREWING--HOPS AND SUGARS--THE
BREWING ROOM--CHEMISTRY AS APPLIED TO BREWING--THE LABORATORY--MASHING,
SPARGING, AND BOILING--FERMENTS IN GENERAL--FERMENTATION WITH COMMERCIAL
YEAST--CULTURE FROM A SINGLE CELL WITH YEASTS--TREATMENT OF BEER--THE
BREWERY AND PLANTS.

     "We have great pleasure in recommending this handy Book."--_The
     Brewers' Guardian._

=CALCULATOR, NUMBER, WEIGHT AND FRACTIONAL.= Containing upwards of
250,000 Separate Calculations, showing at a Glance the Value at 422
Different Rates, ranging from 1/128th of a Penny to 20s. each, or per
cwt., and L20 per ton, of any number of articles consecutively, from 1
to 470. Any number of cwts., qrs., and lbs., from 1 cwt. to 470 cwts.
Any number of tons, cwts., qrs., and lbs., from 1 to 1,000 tons. By
WILLIAM CHADWICK, Public Accountant. Fourth Edition, Revised
and Improved. 8vo, strongly bound =18/0=

     "It is as easy of reference for any answer or any number of answers
     as a dictionary. For making up accounts or estimates the book must
     prove invaluable to all who have any considerable quantity of
     calculations involving price and measure in any combination to
     do."--_Engineer._

     "The most perfect work of the kind yet prepared."--_Glasgow
     Herald._

=CEMENTS, PASTES, GLUES, AND GUMS.= A Guide to the Manufacture and
Application of Agglutinants for Workshop, Laboratory, or Office Use.
With 900 Recipes and Formulae. By H. C. STANDAGE, Crown 8vo,
cloth =2/0=

     "As a revelation of what are considered trade secrets, this book
     will arouse an amount of curiosity among the large number of
     industries it touches."--_Daily Chronicle._

=CHEMISTRY FOR ARMY AND MATRICULATION CANDIDATES.= By GEOFFREY
MARTIN, B.SC., Ph.D. Crown 8vo, cloth. With numerous Illustrations
_Net_ =2/0=

PREPARATION AND USE OF APPARATUS--PREPARATION AND PROPERTIES OF
CERTAIN GASES AND LIQUIDS--SIMPLE QUANTITATIVE EXPERIMENTS--ANALYTICAL
OPERATIONS--SOLUBILITY--WATER CRYSTALLISATION--NEUTRALISATION OF ACIDS
BY BASES, AND PREPARATION OF SIMPLE SALTS--VOLUMETRIC ANALYSIS--CHEMICAL
EQUIVALENTS--OBSERVATION OF REACTION--MELTING AND BOILING
POINTS--SYMBOLS AND ATOMIC WEIGHTS OF THE ELEMENTS--WEIGHTS AND
MEASURES--HINTS ON REGULATING WORK IN PRACTICAL CHEMISTRY CLASSES.

=CLOCKS, WATCHES, & BELLS for PUBLIC PURPOSES.= By EDMUND BECKETT,
LORD GRIMTHORPE, LL.D., K.C., F.R.A.S. Eighth Edition, with new
List of Great Bells and an Appendix on Weathercocks. Crown 8vo, cloth
4/6; cloth boards, =5/6=

     "The only modern treatise on clock-making."--_Horological Journal._

=COACH-BUILDING.= A Practical Treatise, Historical and Descriptive. By
J. W. BURGESS. Crown 8vo, cloth =2/6=

=COKE--MODERN COKING PRACTICE.= Including the Analysis of Materials and
Products. A handbook for those engaged or interested in Coke Manufacture
with recovery of By-Products. By T. H. BYROM, F.I.C., F.C.S.,
Mem. Soc. of Chem. Industry, Chief Chemist to the Wigan Coal and Iron
Company. For fifteen years Lecturer at the Wigan Technical College.
Author of "The Physics and Chemistry of Mining"; and J. E.
CHRISTOPHER, Mem. Soc. of Chem. Industry, Sub-manager of the
Semet Solvay Coking Plant of the Wigan Coal and Iron Company. Lecturer
on Coke Manufacture at the Wigan Technical College. 168 pages, with
numerous illustrations. Demy 8vo, cloth. [_Just Published Net_] =8/6=

     "The authors have succeeded in treating the subject in a clear and
     compact way, giving an easily comprehensible review of the
     different processes."--_Mining Journal._

     "The book will be eagerly read, and the authors may be assured that
     their labour will be appreciated. We anticipate that the book will
     be a success; at any rate it possesses the necessary
     merit."--_Science and Art of Mining._

=COMMERCIAL CORRESPONDENT, FOREIGN.= Being Aids to Commercial
Correspondence in Five Languages--English, French, German, Italian, and
Spanish. By CONRAD E. BAKER. Third Edition, Carefully Revised
Throughout. Crown 8vo, cloth 4/6

     "Whoever wishes to correspond in all the languages mentioned by Mr.
     Baker cannot do better than study this work, the materials of which
     are excellent and conveniently arranged. They consist not of entire
     specimen letters, but--what are far more useful--short passages,
     sentences, or phrases expressing the same general idea in various
     forms."--_Athenaeum._

=CONFECTIONER, MODERN FLOUR.= Containing a large Collection of Recipes
for Cheap Cakes, Biscuits, &c. With remarks on the Ingredients Used in
their Manufacture. By R. WELLS =1/0=

=CONFECTIONERY, ORNAMENTAL.= A Guide for Bakers, Confectioners and
Pastrycooks; including a variety of Modern Recipes, and Remarks on
Decorative and Coloured Work. With 129 Original Designs. By ROBERT
WELLS. Crown 8vo, cloth =5/0=

     "A valuable work, practical, and should be in the hands of every
     baker and confectioner. The illustrative designs are worth treble
     the amount charged for the work."--_Bakers' Times._

=COTTON MANUFACTURE.= A Manual of Practical Instruction of the Processes
of Opening, Carding, Combing, Drawing, Doubling and Spinning, Methods of
Dyeing, &c. For the Use of Operatives, Overlookers, and Manufacturers.
By J. LISTER. 8vo, cloth =7/6=

=DANGEROUS GOODS.= Their Sources and Properties, Modes of Storage and
Transport. With Notes and Comments on Accidents arising therefrom. For
the Use of Government and Railway Officials, Steamship Owners, &c. By H.
J. PHILLIPS. Crown 8vo, cloth =9/0=

=DENTISTRY (MECHANICAL).= A Practical Treatise on the Construction of
the Various Kinds of Artificial Dentures. By C. HUNTER. Crown
8vo, cloth =3/0

=DISCOUNT GUIDE.= Comprising several Series of Tables for the Use of
Merchants, Manufacturers, Ironmongers, and Others, by which may be
ascertained the Exact Profit arising from any mode of using Discounts,
either in the Purchase or Sale of Goods, and the method of either
Altering a Rate of Discount, or Advancing a Price, so as to produce,
by one operation, a sum that will realise any required Profit after
allowing one or more Discounts: to which are added Tables of Profit or
Advance from 11/4 to 90 per cent., Tables of Discount from 11/4 to 983/4 per
cent., and Tables of Commission, &c., from 1/8 to 10 per cent. By HENRY
HARBEN, Accountant. New Edition, Corrected. Demy 8vo, half-bound =L1
5s.=

     "A book such as this can only be appreciated by business men, to
     whom the saving of time means saving of money. The work must prove
     of great value to merchants, manufacturers, and general
     traders."--_British Trade Journal._

=DRYING MACHINERY AND PRACTICE.= A Handbook on the Theory and Practice
of Drying and Desiccating, with Classified Description of Installations,
Machinery, and Apparatus, including also a Glossary of Technical Terms
and Bibliography. By THOMAS G. MARLOW, Grinding, Drying, and
Separating Machinery Specialist. Medium 8vo. About 250 pages, with 150
Illustrations [_In the Press, price about_] =12/6= _net._

=ELECTRICITY IN FACTORIES AND WORKSHOPS: ITS COST AND CONVENIENCE.=
A Handbook for Power Producers and Power Users. By A. P. HASLAM,
M.I.E.E. 328 pages, with numerous illustrations. Large crown, 8vo,
cloth _Net_ =7/6=

=ELECTRO-METALLURGY.= A Practical Treatise. By ALEXANDER WATT.
Tenth Edition, enlarged and revised. Including the most Recent
Processes. Crown 8vo, cloth =3/6=

=ELECTRO-PLATING.= A Practical Handbook on the Deposition of Copper,
Silver, Nickel, Gold, Aluminium, Brass, Platinum, &c., &c. By J. W.
URQUHART, C.E. Fifth Edition, Revised. Crown 8vo, cloth =5/0=

=ELECTRO-PLATING & ELECTRO-REFINING OF METALS= Being a new edition of
ALEXANDER WATT'S "ELECTRO-DEPOSITION." Revised and Rewritten by A.
PHILIP, B.Sc., Principal Assistant to the Admiralty Chemist. Crown 8vo,
cloth _Net_ =12/6=

PART I. ELECTRO-PLATING--PRELIMINARY CONSIDERATIONS--PRIMARY AND
SECONDARY BATTERIES--THERMOPILES--DYNAMOS--COST OF ELECTRICAL
INSTALLATIONS OF SMALL OUTPUT FOR ELECTRO-PLATING--HISTORICAL REVIEW OF
ELECTRO DEPOSITION--ELECTRO DEPOSITION OF COPPER--DEPOSITION OF GOLD BY
SIMPLE IMMERSION--ELECTRO DEPOSITION OF GOLD--VARIOUS GILDING
OPERATIONS--MERCURY GILDING--ELECTRO DEPOSITION OF SILVER--IMITATION
ANTIQUE SILVER--ELECTRO DEPOSITION OF NICKEL, TIN, IRON AND ZINC,
VARIOUS METALS AND ALLOYS--RECOVERY OF GOLD AND SILVER FROM
WASH SOLUTIONS--MECHANICAL OPERATIONS CONNECTED WITH ELECTRO
DEPOSITION--MATERIALS USED IN ELECTRO DEPOSITION. PART II. ELECTRO
METALLURGY--ELECTRO METALLURGY OF COPPER--COST OF ELECTROLYTIC COPPER
REFINING--CURRENT DENSITY AS A FACTOR IN PROFITS--SOME IMPORTANT DETAILS
IN ELECTROLYTIC COPPER REFINERIES--ELECTROLYTIC GOLD AND SILVER BULLION
REFINING--ELECTROLYTIC TREATMENT OF TIN--ELECTROLYTIC REFINING OF
LEAD--ELECTROLYTIC PRODUCTION OF ALUMINIUM AND ELECTROLYTIC REFINING OF
NICKEL--ELECTRO GALVANISING.

     "Eminently a book for the practical worker in
     electro-deposition."--_Engineer._

=ELECTRO-TYPING.= The Reproduction and Multiplication of Printing
Surfaces and Works of Art by the Electro-Deposition of Metals. By J. W.
URQUHART, C.E. Crown 8vo, cloth =5/0=

=ENGINEERING CHEMISTRY.= A Practical Treatise for the Use of Analytical
Chemists, Engineers, Iron Masters, Iron Founders, Students and others.
Comprising Methods of Analysis and Valuation of the Principal Materials
used in Engineering Work, with numerous Analyses, Examples and
Suggestions. By H. PHILLIPS. Third Edition, Revised. Crown 8vo,
420 pp., with Illustrations, cloth _Net_ =10/6=

=EXPLOSIVES, MODERN, A HANDBOOK ON.= A Practical Treatise on the
Manufacture and Use of Dynamite, Gun-Cotton, Nitro-Glycerine and other
Explosive Compounds, including Collodion-Cotton. With Chapters on
Explosives in Practical Application. By M. EISSLER, M.E. Second Edition,
Enlarged. Crown 8vo, cloth =12/6=

     "A veritable mine of information on the subject of explosives
     employed for military, mining, and blasting purposes."--_Army and
     Navy Gazette._

=EXPLOSIVES: NITRO-EXPLOSIVES.= The Properties, Manufacture, and
Analysis of Nitrated Substances, including the Fulminates, Smokeless
Powders, and Celluloid. By P. G. SANFORD, F.I.C., F.C.S.,
Public Analyst to the Borough of Penzance. Second Edition, enlarged.
With Illustrations. Demy 8vo, cloth _Net_ =10/6=

NITRO-GLYCERINE--NITRO-CELLULOSE, ETC.--DYNAMITE--NITRO-BENZOL,
ROBURITE, BELLITE, PICRIC ACID, ETC.--THE FULMINATES--SMOKELESS POWDERS
IN GENERAL--ANALYSIS OF EXPLOSIVES--FIRING POINT, HEAT TESTS,
DETERMINATION OF RELATIVE STRENGTH, ETC.

     "One of the very few text-books in which can be found just what is
     wanted. Mr. Sanford goes steadily through the whole list of
     explosives commonly used, he names any given explosive, and tells
     of what it is composed and how it is manufactured. The book is
     excellent."--_Engineer._

=FACTORY ACCOUNTS: THEIR PRINCIPLES AND PRACTICE.= A Handbook for
Accountants and Manufacturers, with Appendices on the Nomenclature of
Machine Details, the Income Tax Acts, the Rating of Factories, Fire and
Boiler Insurance, the Factory and Workshop Acts, etc., including a
Glossary of Terms and a large number of Specimen Rulings. By EMILE
GARCKE and J. M. FELLS. Fifth Edition, Revised and
Enlarged. Demy 8vo, cloth =7/6=

     "A very interesting description of the requirements of Factory
     Accounts.... The principle of assimilating the Factory Accounts to
     the general commercial books is one which we thoroughly agree
     with."--_Accountants' Journal._

=FLOUR MANUFACTURE.= A Treatise on Milling Science and Practice. By
FRIEDRICH KICK, Imperial Regierungsrath, Professor of
Mechanical Technology in the Imperial German Polytechnic Institute,
Prague. Translated from the Second Enlarged and Revised Edition. By H.
H. P. POWLES, A.M.Inst.C.E. 400 pp., with 28 Folding Plates,
and 167 Woodcuts. Royal 8vo, cloth =L1 5s.=

     "This invaluable work is the standard authority on the science of
     milling."--_The Miller._

=FRENCH POLISHING AND ENAMELLING.= Including numerous Recipes for making
Polishes, Varnishes, Glaze, Lacquers, Revivers, &c. By R. BITMEAD. Crown
8vo, cloth =1/6=

=GAS ENGINEER'S POCKET-BOOK.= Comprising Tables, Notes and Memoranda
relating to the Manufacture, Distribution and Use of Coal Gas and the
Construction of Gas Works. By H. O'CONNOR, A.M.Inst.C.E. Third
Edition. Revised. Crown 8vo, leather. _Net_ =10/6=

GENERAL CONSTRUCTING MEMORANDA--GENERAL MATHEMATICAL
TABLES--UNLOADING MATERIALS AND STORAGE--RETORT
HOUSE--CONDENSERS--BOILERS, ENGINES, PUMPS, AND EXHAUSTERS--SCRUBBERS
AND WASHERS--PURIFIERS--GASHOLDER TANKS--GASHOLDERS--WORKSHOP
NOTES--MANUFACTURING--STORING MATERIALS--RETORT HOUSE
(WORKING)--CONDENSING GAS--EXHAUSTERS, ETC.--WASHING AND
SCRUBBING--PURIFICATION--GASHOLDERS (CARE OF)--DISTRIBUTING
GAS--TESTING--ENRICHING PROCESSES--PRODUCT WORKS--SUPPLEMENTARY.

     "The book contains a vast amount of information."--_Gas World._

=GAS ENGINEERING.= See PRODUCER GAS PRACTICE AND INDUSTRIAL GAS
ENGINEERING. =GAS FITTING.= A Practical Handbook. By JOHN BLACK. Revised
Edition. With 130 Illustrations. Crown 8vo, cloth =2/6=

=GAS LIGHTING.= See ACETYLENE.

=GAS LIGHTING FOR COUNTRY HOUSES.= See PETROL AIR GAS.

=GAS MANUFACTURE, CHEMISTRY OF.= A Practical Manual for the use of Gas
Engineers, Gas Managers and Students. By HAROLD M. ROYLE, Chief
Chemical Assistant at the Beckton Gas Works. Demy 8vo, cloth, 340 pages,
with numerous Illustrations and Coloured Plate. _Net_ =12/6=

PREPARATION OF STANDARD SOLUTIONS--ANALYSIS OF COALS--DESCRIPTION OF
VARIOUS TYPES OF FURNACES--PRODUCTS OF CARBONISATION AT VARIOUS
TEMPERATURES--ANALYSIS OF CRUDE GAS--ANALYSIS OF LIME--ANALYSIS OF
AMMONIACAL LIQUOR--ANALYTICAL VALUATION OF OXIDE OF IRON--ESTIMATION
OF NAPHTHALIN--ANALYSIS OF FIRE-BRICKS AND FIRE-CLAY--ART OF
PHOTOMETRY--CARBURETTED WATER GAS--APPENDIX CONTAINING STATUTORY AND
OFFICIAL REGULATIONS FOR TESTING GAS. VALUABLE EXCERPTS FROM VARIOUS
IMPORTANT PAPERS ON GAS CHEMISTRY, USEFUL TABLES, MEMORANDA, etc.

=GAS WORKS.= Their Construction and Arrangement, and the Manufacture and
Distribution of Coal Gas. By S. HUGHES, C.E. Ninth Edition.
Revised by H. O'CONNOR, A.M.Inst.C.E. Crown 8vo =6/0=

=GOLD WORKING. JEWELLER'S ASSISTANT= for Masters and Workmen, Compiled
from the Experience of Thirty Years' Workshop Practice. By G. E.
GEE. Crown 8vo =7/6=

=GOLDSMITH'S HANDBOOK.= Alloying, Melting, Reducing, Colouring,
Collecting, and Refining. Manipulation, Recovery of Waste, Chemical and
Physical Properties; Solders, Enamels, and other useful Rules and
Recipes, &c. By G. E. GEE, Sixth Edition. Crown 8vo, cloth =3/0=

=GOLDSMITH'S AND SILVERSMITH'S COMPLETE HANDBOOK.= By G. E.
GEE. Crown 8vo, half bound =7/0=

=HALL-MARKING OF JEWELLERY.= Comprising an account of all the different
Assay Towns of the United Kingdom, with the Stamps at present employed;
also the Laws relating to the Standards and Hall-marks at the various
Assay Offices. By G. E. GEE. Crown 8vo =3/0=

=HANDYBOOKS FOR HANDICRAFTS.= By PAUL N. HASLUCK. See page 16.

=HOROLOGY, MODERN, IN THEORY AND PRACTICE.= Translated from the French
of CLAUDIUS SAUNIER, ex-Director of the School of Horology at
Macon, by JULIEN TRIPPLIN, F.R.A.S., Besancon Watch
Manufacturer, and EDWARD RIGG, M.A., Assayer in the Royal Mint.
With Seventy-eight Woodcuts and Twenty-two Coloured Copper Plates.
Second Edition. Super-royal 8vo, =L2 2s.= cloth; half-calf =L2 10s.=

    "There is no horological work in the English language at all to
     be compared to this production of M. Saunier's for clearness and
     completeness. It is alike good as a guide for the student and as a
     reference for the experienced horologist and skilled
     workman."--_Horological Journal._

=ILLUMINATING AND MISSAL PAINTING ON PAPER AND VELLUM.= A Practical
Treatise on Manuscript Work, Testimonials, and Herald Painting, with
Chapters on Lettering and Writing, and on Mediaeval Burnished Gold. With
two Coloured Plates. By PHILIP WHITHARD (First-class Diploma
for Illumination and Herald Painting, Printing Trades Exhibition, 1906).
156 pages. Crown 8vo, cloth _Net_ =4/0=

=INTEREST CALCULATOR.= Containing Tables at 1, 11/2, 2, 21/2, 3, 31/2, 33/4, 4,
41/2, 43/4 and 5 per cent. By A. M. CAMPBELL, Author of "The Concise
Calendar." Crown 8vo, cloth _Net_ =2/6=

=IRON AND METAL TRADES' COMPANION.= For Expeditiously ascertaining the
Value of any Goods bought or sold by Weight, from 1_s._ per cwt. to
112_s._ per cwt., and from one farthing per pound to one shilling per
pound. By THOMAS DOWNIE. Strongly bound in leather, 396 pp. =9/0=

     "A most useful set of tables. Nothing like them before
      existed."--_Building News._

=IRON-PLATE WEIGHT TABLES.= For Iron Shipbuilders, Engineers and Iron
Merchants. Containing the Calculated Weights of upwards of 150,000
different sizes of Iron Plates, from 1 ft. by 6 ins. by 1/4 in. to 10
ft. by 5 ft. by 1 in. Worked out on the basis of 40 lbs. to the square
foot of iron of 1 in. in thickness. By H. BURLINSON and W. H.
SIMPSON. 4to, half bound =L1 5s.=

=LABOUR CONTRACTS.= A Popular Handbook on the Law of Contracts or Works
and Services. By DAVID GIBBONS. Fourth Edition, with Appendix
of Statutes by T. F. UTTLEY; Solicitor. F'cap. 8vo, cloth =3/6=

=LAUNDRY MANAGEMENT.= A Handbook for use in Private and Public
Laundries. Cr. 8vo, cloth =2/0=

=LAW FOR MANUFACTURERS, EMPLOYERS AND OTHERS, ETC.= See "EVERY MAN'S
OWN LAWYER." A Handy-book of the Principles of Law and Equity. By a
BARRISTER. Forty-seventh (1910) Edition, including the
Legislation of 1909. 830 pp. Large crown 8vo, cloth [_Just Published._]
_Net_ =6/8=

SUMMARY OF CONTENTS: LANDLORD AND TENANT--VENDORS AND
PURCHASERS--CONTRACTS AND AGREEMENTS--CONVEYANCES AND
MORTGAGES--JOINT-STOCK COMPANIES--PARTNERSHIP--SHIPPING LAW--DEALINGS
WITH MONEY--SURETISHIP--CHEQUES, BILLS AND NOTES--BILLS OF
SALE--BANKRUPTCY--MASTERS, SERVANTS AND WORKMEN--INSURANCE: LIFE,
ACCIDENT, ETC.--COPYRIGHT, PATENTS. TRADE MARKS--HUSBAND AND WIFE,
DIVORCE--INFANCY, CUSTODY OF CHILDREN--TRUSTEES AND EXECUTORS--TAXES AND
DEATH DUTIES--CLERGYMEN, DOCTORS, AND LAWYERS--PARLIAMENTARY
ELECTIONS--LOCAL GOVERNMENT--LIBEL AND SLANDER--NUISANCES--CRIMINAL
LAW--GAME LAWS, GAMING, INNKEEPERS--FORMS OF WILLS, AGREEMENTS, NOTICES,
ETC.

     "A useful and concise epitome of the law."--_Law Magazine._

     "A complete digest of the most useful facts which constitute
      English law."--_Globe._

     "A dictionary of legal facts well put together. The book is a very
      useful one."--_Spectator._

=LEATHER MANUFACTURE.= A Practical Handbook of Tanning, Currying, and
Chrome Leather Dressing. By A. WATT. Fifth Edition, Revised and
Enlarged. 8vo, cloth _Net_ =12/6=

CHEMICAL THEORY OF THE TANNING PROCESS--THE SKIN--HIDES AND
SKINS--TANNIN OR TANNIC ACID--GALLIC ACID--GALLIC FERMENTATION--TANNING
MATERIALS--ESTIMATION OF TANNIN--PRELIMINARY OPERATIONS--DEPILATION OR
UNHAIRING SKINS AND HIDES--DELIMING OR BATING--TANNING BUTTS FOR SOLE
LEATHER--TANNING PROCESSES--TANNING BY PRESSURE--QUICK TANNING--HARNESS
LEATHER TANNING--AMERICAN TANNING--HEMLOCK TANNING--TANNING BY
ELECTRICITY--CHEMICAL TANNING--MISCELLANEOUS PROCESSES--COST OF AMERICAN
TANNING--MANUFACTURE OF LIGHT LEATHERS--DYEING LEATHER--MANUFACTURE OF
WHITE LEATHER--CHROME LEATHER MANUFACTURE--BOX CALF MANUFACTURE--CHAMOIS
OR OIL LEATHER MANUFACTURE--CURRYING--MACHINERY EMPLOYED IN LEATHER
MANUFACTURE--EMBOSSING LEATHER--FELLMONGERING--PARCHMENT, VELLUM, AND
SHAGREEN--GUT DRESSING--GLUE BOILING--UTILISATION OF TANNER'S
WASTE.

     "A sound, comprehensive treatise on tanning and its
      accessories."--_Chemical Review._

LEATHER MANUFACTURE. PRACTICAL TANNING:= A Handbook of Modern Processes,
Receipts and Suggestions for the Treatment of Hides, Skins, and Pelts of
every description, including various Patents relating to Tanning, with
specifications. By LOUIS A. FLEMMING, American Tanner. Second Edition,
in great part re-written, thoroughly revised, and much enlarged.
Illustrated by six full-page Plates. Medium 8vo, cloth, 630 pages [_Just
published._] _Net_ =28/0=

=MAGNETOS FOR AUTOMOBILISTS, HOW MADE AND HOW USED.= A Handbook of
Practical Instruction in the Manufacture and Adaptation of the Magneto
to the needs of the Motorist. By S. R. BOTTONE, late of the Collegio del
Carmine, Turin, Author of "The Dynamo," "Ignition Devices," &c. Second
Edition, enlarged. With 52 Illustrations. Crown 8vo, cloth Net =2/0=

=MARBLE AND MARBLE WORKING.= A Handbook for Architects, Sculptors,
Marble Quarry Owners and Workers, and all engaged in the Building and
Decorative Industries. Containing numerous Illustrations and thirteen
Coloured Plates. By W. G. RENWICK, Author of "The Marble Industry," "The
Working of Marble for Decorative Purposes," etc. 240 pages. Medium 8vo,
cloth =15/0=

THE CHEMISTRY OF MARBLE--ITS GEOLOGICAL FORMATION--A SHORT
CLASSIFICATION OF MARBLES--ANTIQUITY OF THE MARBLE INDUSTRY--ANCIENT
QUARRIES AND METHODS OF WORKING--MODERN QUARRIES AND QUARRYING
METHODS--MACHINERY USED IN QUARRYING--EUROPEAN AND AMERICAN SYSTEMS
COMPARED--MARBLE AS BUILDING MATERIAL--USES OF MARBLE OTHER THAN FOR
BUILDING PURPOSES-SOURCES OF PRODUCTION: ITALIAN, FRENCH, BELGIAN, AND
GREEK MARBLES, ETC.--MARBLES OF THE UNITED KINGDOM AND BRITISH
COLONIES--CONTINENTAL MARBLE WORKING--MARBLE WORKING MACHINERY--MARBLE
WORKING IN THE UNITED STATES--AMERICAN MACHINERY DESCRIBED AND
COMPARED--MARBLE WORKING: A BRITISH INDUSTRY--MARBLE SUBSTITUTES AND
IMITATIONS--PRACTICAL POINTS FOR THE CONSIDERATION OF ARCHITECTS--HINTS
ON THE SELECTION OF MARBLE--LIST OF MARBLES IN ORDINARY USE, WITH
DESCRIPTIVE NOTES AND INSTANCES OF THEIR APPLICATION.

=MENSURATION AND GAUGING. A POCKET-BOOK= containing Tables, Rules, and
Memoranda for Revenue Officers, Brewers, Spirit Merchants, &c. By J. B.
MANT. Second Edition. 18mo, leather. =4/0=

     "Should be in the hands of every practical brewer."--_Brewers'
     Journal._

=METRIC TABLES, A SERIES OF.= In which the British Standard Measures and
Weights are compared with those of the Metric System at present in Use
on the Continent. By C. H. DOWLING, C.E. 8vo, cloth =10/6=

     "Mr. Dowling's tables are well put together as a ready-reckoner for
     the conversion of one system into the other."--_Athenaeum._

=METROLOGY, MODERN.= A Manual of the Metrical Units and Systems of the
present Century. With an Appendix containing a proposed English System.
By LOWIS d'A. JACKSON, A.M.Inst.C.E., Author of "Aid to Survey
Practice," etc. Large crown 8vo, cloth =12/6=

     "We recommend the work to all interested in the practical reform of
     our weights and measures."--_Nature._

=MOTOR CAR, THE.= A Practical Manual for the use of Students and Motor
Car Owners, with notes on the Internal Combustion Engine and its fuel.
By ROBERT W. A. BREWER, A.M.Inst.C.E., M.I.M.E., M.I.A.E. 250 pages.
With numerous illustrations. Demy 8vo, cloth _Net_ =5/0=

=MOTOR CAR CATECHISM.= Containing about 320 Questions and Answers
Explaining the Construction and Working of a Modern Motor Car. For the
Use of Owners, Drivers, and Students. By JOHN HENRY KNIGHT.
Second Edition, revised and enlarged, with an additional chapter on
Motor Cycles. Crown 8vo, with Illustrations _Net_ =1/6=

THE PETROL ENGINE--TRANSMISSION AND THE CHASSIS--TYRES--DUTIES OF A
CAR DRIVER--MOTOR CYCLES--LAWS AND REGULATIONS.

=MOTOR CARS FOR COMMON ROADS.= By A. J. WALLIS-TAYLER,
A.M.Inst.C.E. 212 pp., with 76 Illustrations. Crown 8vo. =4/6=

=MOTOR VEHICLES FOR BUSINESS PURPOSES.= A Practical Handbook for those
interested in the Transport of Passengers and Goods. By A. J.
WALLIS-TAYLER, A.M.Inst.C.E. With 134 Illustrations. Demy 8vo, cloth
_Net_ =9/0=

RESISTANCE TO TRACTION ON COMMON ROADS--POWER REQUIRED FOR MOTOR
VEHICLES--LIGHT PASSENGER VEHICLES--HEAVY PASSENGER VEHICLES--LIGHT
GOODS VANS--HEAVY FREIGHT VEHICLES--SELF-PROPELLED VEHICLES FOR
MUNICIPAL PURPOSES--MISCELLANEOUS TYPES OF MOTOR VEHICLES--COST OF
RUNNING AND MAINTENANCE.

=OILS AND ALLIED SUBSTANCES. AN ANALYSIS.= By A. C. WRIGHT,
M.A.Oxon., B.Sc.Lond., formerly Assistant Lecturer in Chemistry at the
Yorkshire College, Leeds, and Lecturer in Chemistry at the Hull
Technical School. Demy 8vo, cloth _Net_ =9/0=

THE OCCURRENCE AND COMPOSITION OF OILS, FATS AND WAXES--THE
PHYSICAL PROPERTIES OF OILS, FATS, AND WAXES, AND THEIR
DETERMINATION--THE CHEMICAL PROPERTIES OF OILS, FATS, AND WAXES
FROM THE ANALYTICAL STANDPOINT--DETECTION AND DETERMINATION OF
NON-FATTY CONSTITUENTS--METHODS FOR ESTIMATING THE CONSTITUENTS
OF OILS AND FATS--DESCRIPTION AND PROPERTIES OF THE MORE IMPORTANT
OILS, FATS, AND WAXES, WITH THE METHODS FOR THEIR
INVESTIGATION--EXAMINATION OF CERTAIN COMMERCIAL PRODUCTS.

=ORGAN BUILDING (PRACTICAL).= By W. E. DICKSON, M.A., Precentor
of Ely Cathedral. Second Edition, Crown 8vo =2/6=

=PAINTS, MIXED. THEIR CHEMISTRY AND TECHNOLOGY.= By MAXIMILIAN
TOCH. With 60 Photomicrographic Plates and other Illustrations
_Net_ =12/6=

THE PIGMENTS--YELLOW, BLUE, AND GREEN PIGMENTS--THE INERT FILLERS
AND EXTENDERS--PAINT VEHICLES--SPECIAL PAINTS--ANALYTICAL--APPENDIX.

=PAINTING FOR THE IMITATION OF WOODS AND MARBLES.= As Taught and
Practised by A. R. VAN DER BURG and P. VAN DER BURG, Directors of the
Rotterdam Painting Institution. Royal folio, cloth, 181/2 by 121/2 in.
Illustrated with 24 full-size Coloured Plates; also 12 Plain Plates,
comprising 154 Figures. Fifth Edition _Net_ =25/0=

=PAINTING, GRAINING, MARBLING, AND SIGN WRITING.= With a Course of
Elementary Drawing and a Collection of Useful Receipts. By E. A.
DAVIDSON. Ninth Edition. Coloured Plates. Crown 8vo, cloth,
=5/0=; cloth boards, =6/0=

=PAPER-MAKING.= A Practical Manual for Paper Makers and Owners and
Managers of Paper-Mills. With Tables, Calculations, etc. By G.
CLAPPERTON, Paper-Maker. With Illustrations of Fibres from
Micro-Photographs. Second edition, revised and enlarged. Crown 8vo,
cloth _Net_ =5/0=

CHEMICAL AND PHYSICAL CHARACTERISTICS OF VARIOUS FIBRES--CUTTING AND
BOILING OF RAGS--JUTE BOILING AND BLEACHING--WET PICKING--WASHING,
BREAKING, AND BLEACHING--ELECTROLYTIC BLEACHING--ANTICHLOR--CELLULOSE
FROM WOOD--MECHANICAL WOOD PULP--ESPARTO AND STRAW--BEATING--
LOADING--STARCHING--COLOURING MATTER--RESIN, SIZE, AND SIZING--THE
FOURDRINIER MACHINE AND ITS MANAGEMENT--ANIMAL SIZING--DRYING--GLAZING
AND BURNISHING--CUTTING, FINISHING--MICROSCOPICAL EXAMINATION OF
PAPER--TESTS FOR INGREDIENTS OF PAPER--RECOVERY OF SODA--TESTING
OF CHEMICALS--TESTING WATER FOR IMPURITIES.

     "The author caters for the requirements of responsible mill hands,
     apprentices, etc., whilst his manual will be found of great service
     to students of technology, as well as to veteran paper-makers and
     mill-owners. The illustrations form an excellent feature."--_The
     World's Paper Trade._

=PAPER-MAKING.= A Practical Handbook of the Manufacture of Paper from
Rags, Esparto, Straw, and other Fibrous Materials. Including the
Manufacture of Pulp from Wood Fibre, with a Description of the Machinery
and Appliances used. To which are added Details of Processes for
Recovering Soda from Waste Liquors. By A. WATT. With Illustrations.
Crown 8vo =7/6=

=PAPER MAKING, CHAPTERS ON.= A Series of Volumes dealing in a practical
manner with all the leading questions in connection with the Chemistry
of Paper-Making and the Manufacture of Paper. By CLAYTON BEADLE,
Lecturer on Paper-Making before the Society of Arts, 1898 and 1902, and
at the Battersea Polytechnic Institute, 1902, etc., etc. Each volume is
published separately, at the price of =5/0= _net_ per vol.

     Volume I, comprises a Series of Lectures delivered on behalf of the
     Battersea Polytechnic Institute in 1902. Crown 8vo. 151 pp. _Net_
     5/0

     Volume II. comprises Answers to Questions on Paper-Making Set by
     the Examiners to the City and Guilds of London Institute,
     1901-1903. Crown 8vo, 182 pp. _Net_ =5/0=

     Volume III. comprises a short practical Treatise in which Boiling,
     Bleaching, Loading, Colouring, and similar Questions are discussed.
     Crown 8vo, 142 pp. _Net_ =5/0=

CONTENTS:--"BRASS" AND "STEEL" BEATER BARS--THE SIZE AND SPEED OF
BEATER ROLLS--THE FADING OF PRUSSIAN BLUE PAPERS--THE EFFECT OF LOWERING
THE BREAST ROLL--THE EFFECT OF "LOADING" ON THE TRANSPARENCY OF
PAPER--"TERRA ALBA" AS A LOADING FOR PAPER--THE USE OF ALUM IN TUB
SIZING--THE INFLUENCE OF TEMPERATURE ON BLEACHING--THE USE OF REFINING
ENGINES--AGITATION AS AN AUXILIARY TO BLEACHING--THE HEATING OF "STUFF"
FOR THE PAPER MACHINE--THE COMPARATIVE RESULTS OF QUADRUPLE AND OPEN
EFFECT EVAPORATION--HOW TO PREVENT ELECTRIFICATION OF PAPER ON THE
MACHINE--TRANSPARENCY OF PAPERS--THE "LIFE" OF MACHINE WIRES--EDGE
RUNNERS.

     Volume IV. contains discussions upon Water Supplies and the
     Management of the Paper Machine and its influence upon the
     Qualities of Papers. Crown 8vo, 164 pp. _Net_ =5/0=

CONTENTS:--THE BULKING OF PAPERS--SPECIAL QUALITIES OF "ART"
PAPERS--THE "AGEING" AND STORAGE OF PAPERS--THE USE OF LIME IN
BOILING--CONTROLLING THE MARK OF THE "DANDY"--"MACHINE" AND "HAND" CUT
RAGS--FROTH ON PAPER MACHINE--SCUM SPOTS IN PAPER--CONSUMPTION OF WATER
IN THE MANUFACTURE OF PAPER--THE MANAGEMENT OF SUCTION-BOXES--THE
SHRINKAGE OF PAPER ON THE MACHINE--PAPER THAT DOES NOT SHRINK OR
EXPAND--THE PRODUCTION OF NON-STRETCHABLE PAPER--THE CONNECTION
BETWEEN "STRETCH" AND "EXPANSION" OF PAPERS--"STRETCH" AND "BREAKING
STRAIN"--PAPER TESTING MACHINES.

     Volume V. concerning THE THEORY AND PRACTICE OF BEATING. Crown 8vo.
     With photomicrographs and other Illustrations. _Net_ =5/0=

CONTENTS:--EARLY BEATING APPLIANCES--THE HOLLANDER--THE ECONOMY OF
BEATING--DIFFICULTIES OF ARRIVING AT DEFINITE RESULTS--BEHAVIOUR OF
DIFFERENT FIBRES--"REFINING"--POWER CONSUMPTION--A COMPARISON OF TWO
DIFFERENT KINDS OF BEATERS--POWER CONSUMED IN THE "BREAKING," "BEATING,"
AND "REFINING" OF DIFFERENT MATERIALS--DEALING WITH THE "CIRCULATION"
AND "AGITATION" IN A HOLLANDER--COMPARISONS OF LARGE AND MEDIUM-SIZED
HOLLANDERS WHEN BEATING "HARD" AND "SOFT" STOCK--TRIALS TO DETERMINE THE
RELATIVE MERITS OF STONE AND METAL BEATER-BARS--TRIALS WITH BREAKERS,
REED BEATERS, AND KINGSLAND REFINERS--A SYSTEM OF BEATING COMBINED WITH
A SYSTEM FOR CONTINUOUS BLEACHING--BEATERS AND REFINERS--POWER CONSUMED
IN GRINDING WOOD-PULP--THE REDUCTION IN LENGTH OF FIBRES AT DIFFERENT
STAGES OF BEATING--METHOD FOR DETERMINING THE "WETNESS" OF BEATEN
STUFF--THE POSITION OF BEATERS IN OLD AND MODERN PAPER-MILLS--APPENDIX.

=PARA RUBBER. ITS CULTIVATION & PREPARATION.= By W. H. JOHNSON, F.L.S.,
Ex-Director of Agriculture, Gold Coast Colony, West Africa, Director of
Agriculture, Mozambique Company, East Africa, Commissioned by Government
in 1902 to visit Ceylon to Study the Methods employed there in the
Cultivation and Preparation of Para Rubber and other Agricultural
Staples for Market, with a view to Introduce them into West Africa.
Second Edition, rewritten and greatly enlarged, with numerous
illustrations. Demy 8vo, cloth _Net_ =7/6=

THE WORLD'S PRODUCTION AND CONSUMPTION OF RUBBER--THE PARA RUBBER
TREE AT HOME AND ABROAD--PROPAGATION--PLANTING AND CULTIVATING--SOILS
AND MANURES--PESTS--LATEX--COLLECTING THE LATEX--RUBBER MANUFACTURE--THE
ANTISEPTICISATION OF RUBBER--DRYING AND PACKING RUBBER FOR EXPORT--YIELD
OF PARA RUBBER FROM CULTIVATED TREES--ESTABLISHMENT AND MAINTENANCE OF A
PARA RUBBER PLANTATION--COMMERCIAL VALUE OF THE OIL IN HEVEA SEEDS.

=PASTRYCOOK AND CONFECTIONER'S GUIDE.= For Hotels, Restaurants, and the
Trade in general, adapted also for Family Use. By R. WELLS,
Author of "The Bread and Biscuit Baker" =1/0=

=PETROL AIR GAS.= A Practical Handbook on the Installation and Working
of Air Gas Lighting Systems for Country Houses. By HENRY
O'CONNOR, F.R.S.E., A.M. Inst. C.E., &c., author of "The Gas
Engineer's Pocket Book." 80 pages with illustrations. Crown 8vo, cloth
_Net_ =1/6=

DESCRIPTION OF PREVIOUS PLANTS AND SYSTEMS FOR COUNTRY-HOUSE
LIGHTING, DIFFICULTIES WITH, OBJECTIONS AND PRICES--HISTORY OF PETROL
GAS, COMPARATIVE COSTS--PETROL, ITS NATURE, DANGERS, AND STORING, NOTES
ON THE LAW REGARDING SAME--BURNERS, DESCRIPTION OF SAME, PIPING,
MANTLES--GENERAL PRINCIPLES OF PARTS OF PLANTS--MOTIVE POWER
METERS--WEIGHT-DRIVEN PLANTS--ROOT'S BLOWERS--HOT-AIR ENGINES--PELTON
WATER-WHEELS--DESCRIPTIONS OF VARIOUS PLANTS--EXTRACT FROM AN ACT FOR
THE SAFE-KEEPING OF PETROLEUM AND OTHER SUBSTANCES OF A LIKE
NATURE--APPENDIX--USEFUL NOTES.

=PETROLEUM. THE OIL FIELDS OF RUSSIA AND THE RUSSIAN PETROLEUM
INDUSTRY.= A Practical Handbook on the Exploration, Exploitation, and
Management of Russian Oil Properties, the Origin of Petroleum in Russia,
the Theory and Practice of Liquid Fuel. By A. B. THOMPSON, A.M.I.M.E.,
F.G.S. 415 pp., with numerous Illustrations and Photographic Plates.
Second Edition Revised. Super-royal 8vo, cloth _Net_ =21/0=

=PETROLEUM MINING AND OIL-FIELD DEVELOPMENT.= A Guide to the Exploration
of Petroleum Lands, and a Study of the Engineering Problems connected
with the Winning of Petroleum. Including Statistical Data of important
Oil Fields. Notes on the Origin and Distribution of Petroleum, and a
description of the Methods of Utilizing Oil and Gas Fuels. By A.
BEEBY THOMPSON, A.M.I.Mech.E., F.G.S. Author of "The Oil Fields
of Russia." 384 pages, 114 illustrations, including 22 full-page plates.
Demy 8vo, cloth. [_Just Published._] _Net_ =15/0=

     "It is an admirable text-book by a competent authority on an
     interesting subject."--_Mining Magazine._

     "The present effort is likely to receive a warm welcome in
     engineering circles, and it can be cordially commended for perusal.
     It will doubtless have that large sale to which its merits entitle
     it."--_Mining World._

     "The general aspects of the Petroleum Industry are fully and ably
     laid out."--_Engineer._

=PIGMENTS, ARTISTS' MANUAL OF.= Showing their Composition, Conditions of
Permanency, Non-Permanency, and Adulterations, etc., with Tests of
Purity. By H. C. STANDAGE. Third Edition. Crown 8vo, cloth =2/6=

=PORTLAND CEMENT, THE MODERN MANUFACTURE OF.= By PERCY C. H. WEST,
Chemical Engineer and Consulting Chemist. In Three Volumes. Vol. I.,
dealing with "Machinery and Kilns." About 200 pages, Medium 8vo. With
numerous Illustrations. [_Nearly ready, price about_] =10/6=

=PRODUCER GAS PRACTICE (AMERICAN) AND INDUSTRIAL GAS ENGINEERING.= By
NISBET LATTA, M.Amer.Soc.M.E., M.Amer.Gas Inst. 558 pages, with
247 illustrations. Demy 4to, cloth [_Just Published._] _Net_ =25/-=

PRODUCER OPERATION--CLEANING THE GAS--WORKS DETAILS--PRODUCER
TYPES--MOVING GASES--SOLID FUELS--PHYSICAL PROPERTIES OF GASES--CHEMICAL
PROPERTIES OF GASES--GAS ANALYSIS--GAS POWER--GAS ENGINES--INDUSTRIAL
GAS APPLICATIONS--FURNACES AND KILNS--BURNING LIME AND
CEMENT--PRE-HEATING AIR--DOHERTY COMBUSTION ECONOMISER--COMBUSTION IN
FURNACES--HEAT: TEMPERATURE, RADIATION AND CONDUCTION--HEAT
MEASUREMENTS: PYROMETRY AND CALORIMETRY--PIPES, FLUES, AND
CHIMNEYS--MATERIALS: FIRE CLAY, MASONRY, WEIGHTS AND ROPE--USEFUL
TABLES--OIL FUEL PRODUCER GAS.

=RECIPES, FORMULAS AND PROCESSES, TWENTIETH CENTURY BOOK OF.= Edited by
GARDNER D. Hiscox, M.E. Nearly 10,000 Scientific, Chemical, Technical,
and Household Recipes, Formulas and Processes for Use in the Laboratory
and the Office, the Workshop and the Home. Medium 8vo, 800 pp., cloth.
_Net_ =12/6=

SELECTED LIST OF CONTENTS:--ABSINTHE--ACID PROOFING--ADHESIVES--
ALCOHOL--ALKALI--ALLOYS--ALUMINIUM--AMMONIA--ANILINE--ANTIDOTES FOR
POISON--ANCHOVY PREPARATIONS--ANTISEPTICS--ANTIQUES--BAKING POWDERS--
AROMETERS--BEVERAGES--BLEACHING--BRASS--BRICK--CARBOLIC ACIDS--CASTING--
CELLULOID--CHEESE--CERAMICS--CIGARS--COFFEE--CONDIMENTS--COPPER--
COSMETICS--COTTON--DIAMOND TESTS--DONARITE--DYES--ELECTRO PLATING--
EMBALMING--ENAMELLING--ENGRAVING--ESSENCES--EXPLOSIVES--FERTILISERS--
FILTERS--FOOD ADULTERANTS--GELATINE--GLASS--GOLD--GUMS--HARNESS
DRESSINGS--HORN--INKS--INSECTICIDES--IRON--IVORY--JEWELLERS' FORMULAS--
LACQUERS--LAUNDRY PREPARATIONS--LEATHER--LINOLEUM--LUBRICANTS--
MATCHES--METALS--MUSIC BOXES--OILS--PAINTS--PAPER--PERFUMES--PETROLEUM--
PHOTOGRAPHY--PLASTER--PLATING--POLISHES--PORCELAIN--POULTRY--PUTTY--RAT
POISONS--REFRIGERATION--ROPES--RUBBER--RUST PREVENTIVES--SALT--SCREWS--
SILK--SILVER--SOAPS--SOLDERS--SPIRIT--SPONGES--STEEL--STONE--
THERMOMETERS--TIN--VALVES--VARNISHES--VETERINARY FORMULAS--WATCHMAKERS'
FORMULAS--WATERPROOFING--WAX--WEIGHTS AND MEASURES--WHITEWASH--
WOOD--YEAST.

=RUBBER HAND STAMPS.= And the Manipulation of Rubber. A Practical
Treatise on the Manufacture of Indiarubber Hand Stamps, Small Articles
of Indiarubber, The Hektograph, Special Inks, Cements, and Allied
Subjects. By T. O'CONOR SLOANE A.M., Ph.D. With numerous
Illustrations. Square 8vo, cloth =5/0=

=SAVOURIES AND SWEETS.= Suitable for Luncheons and Dinners. By Miss M.
L. Allen (Mrs. A. Macaire), Author of "Breakfast Dishes," etc.
Thirty-first Edition. F'cap 8vo, sewed =1/0= Or, quarter bound, fancy
boards =1/6=

=SHEET METAL-WORKER'S GUIDE.= A Practical Handbook for Tinsmiths,
Coppersmiths, Zincworkers, &c., with 46 Diagrams and Working Patterns.
By W. J. E. CRANE. Crown 8vo, Cloth =1/6=

=SHEET METAL-WORKER'S INSTRUCTOR.= Comprising Geometrical Problems and
Practical Rules for Describing the Various Patterns Required by Zinc,
Sheet-Iron, Copper, and Tin-Plate Workers. By R. H. WARN. Third
Edition. Revised and Further Enlarged by J. G. HORNER,
A.M.I.M.E. Crown 8vo, 280 pp., with 465 Illustrations, cloth =7/6=

=SILVERSMITH'S HANDBOOK.= Alloying and Working of Silver, Refining and
Melting, Solders, Imitation Alloys, Manipulation, Prevention of Waste,
Improving and Finishing the Surface of the Work, etc. By GEORGE E.
GEE. Fourth Edition Revised, Crown 8vo, cloth =3/0=

=SOAP-MAKING.= A Practical Handbook of the Manufacture of Hard and Soft
Soaps, Toilet Soaps, etc. With a Chapter on the Recovery of Glycerine
from Waste Leys. By ALEXANDER WATT. Seventh Edition, including
an Appendix on Modern Candlemaking. Crown 8vo, cloth =7/6=

     "The work will prove very useful, not merely to the technological
     student, but to the soap boiler who wishes to understand the theory
     of his art."--_Chemical News._

=SOAPS, CANDLES, and GLYCERINE.= A Practical Manual of Modern Method
of Utilisation of Fats and Oils in the Manufacture of Soap and Candles,
and of the recovery of Glycerine. By L. L. LAMBORN, Massachusetts
Institute of Technology, M.Am.C.S. Medium 8vo, cloth. Fully Illustrated.
706 pages _Net_ =30/0=

THE SOAP INDUSTRY--RAW MATERIALS--BLEACHING AND PURIFICATION OF
SOAP-STOCK--THE CHEMICAL CHARACTERISTICS OF SOAP-STOCK AND THEIR
BEHAVIOUR TOWARDS SAPONIFYING AGENTS--MECHANICAL EQUIVALENT OF THE SOAP
FACTORY--COLD PROCESS AND SEMI-BOILED SOAP--GRAINED SOAP--SETTLED ROSIN
SOAP--MILLED SOAP-BASE--FLOATING SOAP--SHAVING SOAP--MEDICATED
SOAP--ESSENTIAL OILS AND SOAP PERFUMERY--MILLED SOAP--CANDLES--
GLYCERINE--EXAMINATION OF RAW MATERIALS AND FACTORY PRODUCTS.

=SOLUBILITIES OF INORGANIC AND ORGANIC SUBSTANCES.= A Hand-book of the
most Reliable Quantitative Solubility Determinations. Recalculated and
Compiled by ATHERTON SEIDELL, Ph.D., Chemist, Hygienic Laboratory, U. S.
Public Health Service, Washington, D C. Medium 8vo, cloth, 377 pages
_Net_ =12/6=

=TEA MACHINERY AND TEA FACTORIES.= Describing the Mechanical Appliances
required in the Cultivation and Preparation of Tea for the Market. By A.
J. WALLIS-TAYLER, A.M.Inst.C.E. Medium 8vo, 468 pp. With 218
Illustrations _Net_ =25/0=

     "The subject of tea machinery is now one of the first interest to a
     large class of people, to whom we strongly commend the
     volume."--_Chamber of Commerce Journal._

=WAGES TABLES.= At 54, 52, 50, and 48 Hours per Week. Showing the
Amounts of Wages from one quarter of an hour to sixty-four hours, in
each case at Rates of Wages advancing by One Shilling from 4s. to
55s. per week. By THOS. CARBUTT, Accountant. Square crown, 8vo,
half-bound =6/0=

=WATCH REPAIRING, CLEANING, AND ADJUSTING.= A Practical Handbook dealing
with the Materials and Tools Used, and the Methods of Repairing,
Cleaning, Altering, and Adjusting all kinds of English and Foreign
Watches, Repeaters, Chronographs, and Marine Chronometers. By F. J.
GARRARD, Springer and Adjuster of Marine Chronometers and Deck Watches
for the Admiralty. Second Edition. Revised. With over 200 Illustrations.
Crown 8vo, cloth _Net_ =4/6=

=WATCHES AND OTHER TIMEKEEPERS, HISTORY OF.= By J. F. KENDAL,
M.B.H. Inst. =1/6= boards; or cloth =2/6=

=WATCHMAKER'S HANDBOOK.= Intended as a Workshop Companion for those
engaged in Watchmaking and the Allied Mechanical Arts. Translated from
the French of CLAUDIUS SAUNIER, and enlarged by JULIEN TRIPPLIN,
F.R.A.S., and EDWARD RIGG, M.A., Assayer in the Royal Mint. Fourth
Edition. Cr. 8vo, cloth =9/0=

     "Each part is truly a treatise in itself. The arrangement is good
     and the language is clear and concise. It is an admirable guide for
     the young watchmaker."--_Engineering._

=WEIGHT CALCULATOR.= Being a Series of Tables upon a New and
Comprehensive Plan, exhibiting at one Reference the Exact Value of any
Weight from 1 lb. to 15 tons, at 300 Progressive Rates, from 1d. to
168s. per cwt., and containing 186,000 Direct Answers, which, with their
Combinations, consisting of a single addition (mostly to be performed at
sight), will afford an aggregate of 10,266,000 Answers; the whole being
calculated and designed to ensure correctness and promote despatch. By
HENRY HARBEN, Accountant. Sixth edition, carefully corrected.
Royal 8vo, strongly half bound =L1 5s.=

     "A practical and useful work of reference for men of business
     generally."--_Ironmonger._

     "Of priceless value to business men."--_Sheffield Independent._

=WOOD ENGRAVING.= A Practical and Easy Introduction to the Study of the
Art. By W. N. BROWN. Crown 8vo, cloth. =1/6=




HANDYBOOKS FOR HANDICRAFTS.

BY PAUL N. HASLUCK.

Author of "Lathe Work," etc. Crown 8vo, 144 pp., price 1s. each.


[symbol: right pointing hand]_These_ HANDYBOOKS _have been written to
supply information for_ WORKMEN STUDENTS, _and_ AMATEURS _in the several
Handicrafts, on the actual_ PRACTICE _of the_ WORKSHOP, _and are
intended to convey in plain language_ TECHNICAL KNOWLEDGE _of the
several_ CRAFTS. _In describing the processes employed, and the
manipulation of material, workshop terms are used; workshop practice is
fully explained; and the text is freely illustrated with drawings of
modern tools, appliances, and processes._

=METAL TURNER'S HANDYBOOK.= A Practical Manual for Workers at the
Foot-Lathe. With 100 Illustrations =1/0=

     "The book displays thorough knowledge of the subject."--_Scotsman._

=WOOD TURNER'S HANDYBOOK.= A Practical Manual for Workers at the Lathe.
With 100 Illustrations =1/0=

     "We recommend the book to young turners and amateurs."--_Mechanical
     World._

=WATCH JOBBER'S HANDYBOOK.= A Practical Manual of Cleaning, Repairing,
and Adjusting. With 100 Illustrations =1/0=

     "All connected with the trade should acquire and study this
     work."--_Clerkenwell Chronicle._

=PATTERN MAKER'S HANDYBOOK.= A Practical Manual on the Construction of
Patterns. With 100 Illustrations =1/0=

     "A most valuable, if not indispensable, manual for the
     pattern-maker."--_Knowledge._

=MECHANIC'S WORKSHOP HANDYBOOK.= A Practical Manual on Mechanical
Manipulation, embracing Information on various Handicraft Processes.
With Useful Notes and Miscellaneous Memoranda. Comprising about 200
Subjects =1/0=

     "Should be found in every workshop, and in all technical
     Schools."--_Saturday Review._

=MODEL ENGINEER'S HANDYBOOK.= A Practical Manual on the Construction of
Model Steam Engines. With upwards of 100 Illustrations =1/0=

     "Mr. Hasluck has produced a very good little book."--_Builder._

=CLOCK JOBBER'S HANDYBOOK.= A Practical Manual on Cleaning, Repairing,
and Adjusting. With 100 Illustrations =1/0=

     "It is of inestimable service to those commencing the
     trade."--_Coventry Standard._

=CABINET WORKER'S HANDYBOOK.= A Practical Manual on the Tools,
Materials, Appliances, and Processes employed in Cabinet Work. With
upwards of 100 Illustrations =1/0=

     "Amongst the most practical guides for beginners in
     cabinet-work."--_Saturday Review._

=WOODWORKER'S HANDYBOOK.= Embracing information on the Tools,
Materials, Appliances and Processes Employed in Woodworking. With 104
Illustrations =1/0=

     "Written by a man who knows, not only how work ought to be done,
     but how to do it, and how to convey his knowledge to
     others."--_Engineering._

     "Mr. Hasluck writes admirably, and gives complete
     instructions."--_Engineer._

     "Mr. Hasluck combines the experience of a practical teacher with
     the manipulative skill and scientific knowledge of processes of the
     trained mechanician, and the manuals are marvels of what can be
     produced at a popular price."--_Schoolmaster._

     "Helpful to workmen of all ages and degrees of experience."--_Daily
     Chronicle._

BRADBURY, AGNEW, & CO. LD., LONDON AND TONBRIDGE. (391.25.5.10.)




_WEALE'S SCIENTIFIC & TECHNICAL SERIES._


MATHEMATICS, ARITHMETIC, &c.

Geometry, Descriptive. J. F. HEATHER                         2/-
Practical Plane Geometry. J. F. HEATHER                      2/-
Analytical Geometry. J. HANN & J. R. YOUNG                   2/-
Geometry. Part I. (Euclid, Bks. I.--III.) H. LAW             1/6
          Part II. (Euclid, Books IV., V., VI., XI.,
                   XII.). H. LAW                             1/6
Geometry, in 1 vol. (Euclid's Elements)                      2/6
Plane Trigonometry. J. HANN                                  1/6
Spherical Trigonometry. J. HANN                              1/-
       The above 2 vols., bound together                     2/6
Differential Calculus. W. S. B. WOOLHOUSE                    1/6
Integral Calculus. H. COX                                    1/6
Algebra. J. HADDON                                           2/-
Key to ditto                                                 1/6
Book-keeping. J. HADDON                                      1/6
Arithmetic. J. R. YOUNG                                      1/6
Key to ditto                                                 1/6
Equational Arithmetic. W. HIPSLEY                            1/6
Arithmetic. J. HADDON                                        1/6
Mathematical Instruments. HEATHER & WALMISLEY                2/-
Drawing & Measuring Instruments. J. F. HEATHER               1/6
Optical Instruments, J. F. HEATHER                           1/6
Surveying & Astronomical Instruments. J. F. HEATHER          1/6
      The above 3 vols., bound together                      4/6
Mensuration and Measuring. T. BAKER                          1/6
Slide Rule, & How to Use it. C. HOARE                        2/6
Measures, Weights, & Moneys. W. S. B. WOOLHOUSE              2/6
Logarithms, Treatise on, with Tables. H. LAW                 3/-
Compound Interest and Annuities. F. THOMAN                   4/-
Compendious Calculator. D. O'GORMAN                          2/6
Mathematics. F. CAMPIN                                       3/-
Astronomy. R. MAIN & W. T. LYNN                              2/-
Statics and Dynamics. T. BAKER                               1/6
Superficial Measurement. J. HAWKINGS                         3/6


BUILDING & ARCHITECTURE.

Building Estates. F. MAITLAND                                2/-
Science of Building. E. W. TARN                              3/6
Building, Art of. E. DOBSON and J. P. ALLEN                  2/-
Book on Building. Sir E. BECKETT                             4/6
Dwelling Houses, Erection of. S. H. BROOKS                   2/6
Cottage Building. C. B. ALLEN                                2/-
Acoustics of Public Buildings. Prof. T. R. SMITH.            1/6
Practical Bricklaying. A. HAMMOND                            1/6
Practical Brick Cutting & Setting. A. HAMMOND                1/6
Brickwork. F. WALKER                                         1/6
Brick and Tile Making. E. DOBSON                             3/-
Practical Brick & Tile Book. DOBSON & HAMMOND                6/-
Carpentry and Joinery. T. TREDGOLD & E. W. TARN              3/6
      Atlas of 35 plates to the above                        6/-
Handrailing, and Staircasing. G. COLLINGS                    2/6
Circular Work in Carpentry. G. COLLINGS                      2/6
Roof Carpentry. G. COLLINGS                                  2/-
Construction of Roofs. E. W. TARN                            1/6
Joints used by Builders. J. W. CHRISTY                       3/-
Shoring. G. H. BLAGROVE                                      1/6
Timber Importer's & Builder's Guide. R. E. GRANDY            2/-
Plumbing. W. P. BUCHAN                                       3/6
Ventilation of Buildings. W. P. BUCHAN                       3/6
Practical Plasterer. W. KEMP                                 2/-
House-Painting. E. A. DAVIDSON                               5/-
Elementary Decoration. J. W. FACEY                           2/-
Practical House Decoration. J. W. FACEY                      2/6
Gas-Fitting. J. BLACK                                        2/6
Portland Cement for Users. H. FAIJA & D. B. BUTLER           3/-
Limes, Cements, & Mortars. G. R. BURNELL                     1/6
Masonry and Stone Cutting. E. DOBSON                         2/6
Arches, Piers, and Buttresses. W. BLAND                      1/6
Quantities and Measurements. A. C. BEATON                    1/6
Complete Measurer. R. HORTON                                 4/-
Superficial Measurement. J. HAWKINGS                         3/6
Light, for use of Architects. E. W. TARN                     1/6
Hints to Young Architects. WIGHTWICK & GUILLAUME             3/6
Dictionary of Architectural Terms. J. WEALE                  5/-
Architecture, Orders. W. H. LEEDS                            1/6
Architecture, Styles. T. T. BURY                             2/-
       The above 2 vols., bound together                     3/6
Architecture, Design. E. L. GARBETT                          2/6
       The above 3 vols., bound together                     6/-
Architectural Modelling. T. A. RICHARDSON                    1/6
Vitruvius' Architecture. J. GWILT                            5/-
Grecian Architecture. Lord ABERDEEN                          1/-
       The above 2 vols., bound together                     6/-


FINE ARTS.

Dictionary of Painters. P. DARYL                             2/6
Painting, Fine Art. T. J. GULLICK & J. TIMBS                 5/-
Grammar of Colouring. G. FIELD & E. A. DAVIDSON              3/-
Perspective. G. PYNE                                         2/-
Glass Staining & Painting on Glass                           2/6
Music. C. C. SPENCER                                         2/6
Pianoforte Instruction. C. C. SPENCER                        1/6


INDUSTRIAL & USEFUL ARTS.

Cements, Pastes, Glues & Gums. H. C. STANDAGE                2/-
Clocks, Watches and Bells. Lord GRIMTHORPE                   4/6
Goldsmith's Handbook. G. E. GEE                              3/-
Silversmith's Handbook. G. E. GEE                            3/-
Goldsmith's & Silversmith's Handbook. G. E. GEE              7/-
Hall-Marking of Jewelry. G. E. GEE                           2/-
Cabinet Maker's Guide. R. BITMEAD                            2/6
Practical Organ Building. W. E. DICKSON                      2/6
Coach Building. J. W. BURGESS                                2/6
Brass Founder's Manual. W. GRAHAM                            2/-
French Polishing and Enamelling. R. BITMEAD                  1/6
House Decoration. J. W. FACEY                                5/-
Letter-Painting Made Easy. J. G. BADENOCH                    1/6
Boot and Shoemaking. J. B. LENO                              2/-
Mechanical Dentistry. C. HUNTER                              3/-
Wood Engraving. W. N. BROWN                                  1/6
Laundry Management                                           2/-


CROSBY LOCKWOOD & SON, 7, Stationers' Hall Court, E.C.


[Transcriber's note: the following advertisements were moved from
the front of the book.]

_WEALE'S SCIENTIFIC & TECHNICAL SERIES._


CIVIL ENGINEERING & SURVEYING.

Civil Engineering. H. LAW & D. K. CLARK                      6/6
Pioneer Engineering. E. DOBSON                               4/6
Iron Bridges of Moderate Span. H. W. PENDRED                 2/-
Iron and Steel Bridges & Viaducts. F. CAMPIN                 3/6
Constructional Steel & Ironwork. F. CAMPIN                   3/6
Tubular & Girder Bridges. G. D. DEMPSEY                      2/-
Materials and Construction. F. CAMPIN                        3/-
Sanitary Work. C. SLAGG                                      3/-
Roads & Streets. LAW, CLARK, & WALLIS-TAYLER                 6/-
Construction of Gasworks. S. HUGHES & H. O'CONNOR            6/-
Well-Sinking. J. G. SWINDELL & G. R. BURNELL                 2/-
Drainage. G. D. DEMPSEY & D. K. CLARK                        4/6
Blasting and Quarrying. J. BURGOYNE                          1/6
Foundations and Concrete Work. E. DOBSON                     1/6
Pneumatics. C. TOMLINSON                                     1/6
Surveying. T. BAKER & F. E. DIXON                            2/-


MECHANICAL ENGINEERING, &c.

Engineering Drawing. J. MAXTON                               3/6
Fuels, Analysis and Valuation. H. J. PHILLIPS                2/-
Fuel. C. W. WILLIAMS & D. K. CLARK                           3/6
Boilermaker's Assistant. J. COURTNEY                         2/-
Boilermaker's Ready Reckoner. J. COURTNEY                    4/-
Boilermaker's Ready Reckoner and Assistant                   7/-
Steam Boilers. R. ARMSTRONG                                  1/6
Steam and Machinery Management. M. P. BALE                   2/6
Steam and the Steam Engine. D. K. CLARK                      3/6
Steam Engine, Theory of. T. BAKER                            1/6
Steam Engine. Dr. LARDNER                                    1/6
Locomotive Engines. G. D. DEMPSEY & D. K. CLARK              3/-
Locomotive Engine Driving. M. REYNOLDS                       3/6
Stationary Engine Driving. M. REYNOLDS                       3/6
Model Locomotive Engineer. M. REYNOLDS                       3/6
Modern Workshop Practice. J. G. WINTON                       3/6
Mechanical Engineering. F. CAMPIN                            2/6
Details of Machinery. F. CAMPIN                              3/-
Elementary Marine Engineering. J. S. BREWER                  1/6
Power of Water. J. GLYNN                                     2/-
Mechanism and Machines. T. BAKER & J. NASMYTH                2/6
Mechanics. C. TOMLINSON                                      1/6
Cranes and Machinery. J. GLYNN                               1/6
Smithy and Forge. W. J. E. CRANE                             2/6
Sheet-Metal Worker's Guide. W. J. E. CRANE                   1/6
Elementary Electric Lighting. A. A. C. SWINTON               1/6


MINING & METALLURGY.

Mining Calculations. T. A. O'DONAHUE                         3/6
Mineralogy. A. RAMSAY                                        3/6
Coal Mining. Sir W. W. SMYTH & T. F. BROWN                   3/6
Metallurgy of Iron. H. BAUERMAN                              5/-
Mineral Surveyor's Guide. W. LINTERN                         3/6
Slate and Slate Quarrying. D. C. DAVIES                      3/-
Mining and Quarrying. J. H. COLLINS                          1/6
Subterraneous Surveying. T. FENWICK & T. BAKER               2/6
Mining Tools. W. MORGANS                                     2/6
Plates to ditto. 4to                                         4/6
Physical Geology. PORTLOCK & TATE                            2/-
Historical Geology. R. TATE                                  2/6
    The above 2 vols., bound together.                       4/6
Electro-Metallurgy. A. WATT                                  3/6


NAVIGATION, SHIPBUILDING, &c.

Navigation. J. GREENWOOD & W. H. ROSSER                      2/6
Practical Navigation. GREENWOOD, ROSSER & LAW                7/-
Navigation and Nautical Astronomy. J. R. YOUNG               2/6
Mathematical & Nautical Tables. LAW & YOUNG                  4/-
Masting and Rigging. R. KIPPING                              2/-
Sails and Sailmaking. R. KIPPING                             2/6
Marine Engines. R. MURRAY & G. CARLISLE                      4/6
Naval Architecture. J. PEAKE                                 3/6
Ships, Construction of. H. A. SOMMERFELDT                    1/6
Plates to ditto. 4to                                         7/6
Ships and Boats. W. BLAND                                    1/6


=AGRICULTURE & GARDENING.=

Fertilisers & Feeding Stuffs. DR. B. DYER             _net_  1/-
Draining and Embanking. PROF. J. SCOTT                       1/6
Irrigation and Water Supply. PROF. J. SCOTT                  1/6
Farm Roads, Fences, and Gates. PROF. J. SCOTT                1/6
Farm Buildings. PROF. J. SCOTT                               2/-
Barn Implements and Machines. PROF. J. SCOTT                 2/-
Field Implements and Machines. PROF. J. SCOTT                2/-
Agricultural Surveying. PROF. J. SCOTT                       1/6
    The above 7 vols., bound together                       12/-
Farm Management. R. S. BURN                                  2/6
Landed Estates Management. R. S. BURN                        2/6
Farming--Soils, Manures, and Crops. R. S. BURN               2/-
Farming--Outlines--Farming Economy. R. S. BURN               3/-
Farming--Cattle, Sheep, and Horses. R. S. BURN               2/6
Farming--Dairy, Pigs, and Poultry. R. S. BURN                2/-
Farming--Sewage & Irrigation. R. S. BURN                     2/6
    The above 5 vols., bound together                       12/-
Book-keeping for Farmers. J. M. WOODMAN                      2/6
Ready Reckoner for Land. A. ARMAN                            2/-
Miller's & Farmer's Ready Reckoner                           2/-
Hay and Straw Measurer. J. STEELE                            2/-
Meat Production. J. EWART                                    2/6
The Sheep. W. C. SPOONER                                     3/6
Multum-in-Parvo Gardening. S. WOOD                           1/-
Forcing Garden. S. WOOD                                      3/6
Market and Kitchen Gardening. C. W. SHAW                     3/-
Kitchen Gardening. G. M. F. GLENNY                           1/6
Cottage Gardening. E. HOBDAY                                 1/6
Garden Receipts. C. W. QUIN                                  1/6
Potatoes: How to Grow. J. PINK                               2/-
Culture of Fruit Trees. M. DU BREUIL                         3/6
Tree Planter & Plant Propagator. S. WOOD                     2/-
Tree Pruner. S. WOOD                                         1/6
Tree Planter, Propagator, & Pruner. S. WOOD                  3/6
Grafting and Budding. C. BALTET                              2/6
Bees for Pleasure & Profit. G. G. SAMSON              _net_  1/-

CROSBY LOCKWOOD & SON, 7, Stationers' Hall Court, E.C.


Transcriber's notes:
page
 14.  add period after "the above processes"
 29.  varnsh corrected to varnish
 31.  from corrected
 32.  closing quote added after Polish
 44.  polish aud spirits changed to and
 93.  added parens close after "finish
 95.  earthern corrected to earthen
 97.  boiled-linseed oil corrected to boiled linseed-oil
104.  period after coarsely
114.  campeachiaum corrected to campeachianum
130.  published net added right bracket
131.  net added right bracket
131.  OF METALS added period
134.  added right bracket ]
135.  Material [added right bracket] Uses of
137.  "Refining"--Power Consumption added dashes
138.  added ] in 3 places






End of Project Gutenberg's French Polishing and Enamelling, by Richard Bitmead

*** END OF THIS PROJECT GUTENBERG EBOOK FRENCH POLISHING AND ENAMELLING ***

***** This file should be named 17935.txt or 17935.zip *****
This and all associated files of various formats will be found in:
        http://www.gutenberg.org/1/7/9/3/17935/

Produced by K.D. Thornton and the Online Distributed
Proofreading Team at http://www.pgdp.net


Updated editions will replace the previous one--the old editions
will be renamed.

Creating the works from public domain print editions means that no
one owns a United States copyright in these works, so the Foundation
(and you!) can copy and distribute it in the United States without
permission and without paying copyright royalties.  Special rules,
set forth in the General Terms of Use part of this license, apply to
copying and distributing Project Gutenberg-tm electronic works to
protect the PROJECT GUTENBERG-tm concept and trademark.  Project
Gutenberg is a registered trademark, and may not be used if you
charge for the eBooks, unless you receive specific permission.  If you
do not charge anything for copies of this eBook, complying with the
rules is very easy.  You may use this eBook for nearly any purpose
such as creation of derivative works, reports, performances and
research.  They may be modified and printed and given away--you may do
practically ANYTHING with public domain eBooks.  Redistribution is
subject to the trademark license, especially commercial
redistribution.



*** START: FULL LICENSE ***

THE FULL PROJECT GUTENBERG LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg-tm mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase "Project
Gutenberg"), you agree to comply with all the terms of the Full Project
Gutenberg-tm License (available with this file or online at
http://gutenberg.org/license).


Section 1.  General Terms of Use and Redistributing Project Gutenberg-tm
electronic works

1.A.  By reading or using any part of this Project Gutenberg-tm
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement.  If you do not agree to abide by all
the terms of this agreement, you must cease using and return or destroy
all copies of Project Gutenberg-tm electronic works in your possession.
If you paid a fee for obtaining a copy of or access to a Project
Gutenberg-tm electronic work and you do not agree to be bound by the
terms of this agreement, you may obtain a refund from the person or
entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B.  "Project Gutenberg" is a registered trademark.  It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement.  There are a few
things that you can do with most Project Gutenberg-tm electronic works
even without complying with the full terms of this agreement.  See
paragraph 1.C below.  There are a lot of things you can do with Project
Gutenberg-tm electronic works if you follow the terms of this agreement
and help preserve free future access to Project Gutenberg-tm electronic
works.  See paragraph 1.E below.

1.C.  The Project Gutenberg Literary Archive Foundation ("the Foundation"
or PGLAF), owns a compilation copyright in the collection of Project
Gutenberg-tm electronic works.  Nearly all the individual works in the
collection are in the public domain in the United States.  If an
individual work is in the public domain in the United States and you are
located in the United States, we do not claim a right to prevent you from
copying, distributing, performing, displaying or creating derivative
works based on the work as long as all references to Project Gutenberg
are removed.  Of course, we hope that you will support the Project
Gutenberg-tm mission of promoting free access to electronic works by
freely sharing Project Gutenberg-tm works in compliance with the terms of
this agreement for keeping the Project Gutenberg-tm name associated with
the work.  You can easily comply with the terms of this agreement by
keeping this work in the same format with its attached full Project
Gutenberg-tm License when you share it without charge with others.

1.D.  The copyright laws of the place where you are located also govern
what you can do with this work.  Copyright laws in most countries are in
a constant state of change.  If you are outside the United States, check
the laws of your country in addition to the terms of this agreement
before downloading, copying, displaying, performing, distributing or
creating derivative works based on this work or any other Project
Gutenberg-tm work.  The Foundation makes no representations concerning
the copyright status of any work in any country outside the United
States.

1.E.  Unless you have removed all references to Project Gutenberg:

1.E.1.  The following sentence, with active links to, or other immediate
access to, the full Project Gutenberg-tm License must appear prominently
whenever any copy of a Project Gutenberg-tm work (any work on which the
phrase "Project Gutenberg" appears, or with which the phrase "Project
Gutenberg" is associated) is accessed, displayed, performed, viewed,
copied or distributed:

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org

1.E.2.  If an individual Project Gutenberg-tm electronic work is derived
from the public domain (does not contain a notice indicating that it is
posted with permission of the copyright holder), the work can be copied
and distributed to anyone in the United States without paying any fees
or charges.  If you are redistributing or providing access to a work
with the phrase "Project Gutenberg" associated with or appearing on the
work, you must comply either with the requirements of paragraphs 1.E.1
through 1.E.7 or obtain permission for the use of the work and the
Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or
1.E.9.

1.E.3.  If an individual Project Gutenberg-tm electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any additional
terms imposed by the copyright holder.  Additional terms will be linked
to the Project Gutenberg-tm License for all works posted with the
permission of the copyright holder found at the beginning of this work.

1.E.4.  Do not unlink or detach or remove the full Project Gutenberg-tm
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg-tm.

1.E.5.  Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg-tm License.

1.E.6.  You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including any
word processing or hypertext form.  However, if you provide access to or
distribute copies of a Project Gutenberg-tm work in a format other than
"Plain Vanilla ASCII" or other format used in the official version
posted on the official Project Gutenberg-tm web site (www.gutenberg.org),
you must, at no additional cost, fee or expense to the user, provide a
copy, a means of exporting a copy, or a means of obtaining a copy upon
request, of the work in its original "Plain Vanilla ASCII" or other
form.  Any alternate format must include the full Project Gutenberg-tm
License as specified in paragraph 1.E.1.

1.E.7.  Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg-tm works
unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8.  You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg-tm electronic works provided
that

- You pay a royalty fee of 20% of the gross profits you derive from
     the use of Project Gutenberg-tm works calculated using the method
     you already use to calculate your applicable taxes.  The fee is
     owed to the owner of the Project Gutenberg-tm trademark, but he
     has agreed to donate royalties under this paragraph to the
     Project Gutenberg Literary Archive Foundation.  Royalty payments
     must be paid within 60 days following each date on which you
     prepare (or are legally required to prepare) your periodic tax
     returns.  Royalty payments should be clearly marked as such and
     sent to the Project Gutenberg Literary Archive Foundation at the
     address specified in Section 4, "Information about donations to
     the Project Gutenberg Literary Archive Foundation."

- You provide a full refund of any money paid by a user who notifies
     you in writing (or by e-mail) within 30 days of receipt that s/he
     does not agree to the terms of the full Project Gutenberg-tm
     License.  You must require such a user to return or
     destroy all copies of the works possessed in a physical medium
     and discontinue all use of and all access to other copies of
     Project Gutenberg-tm works.

- You provide, in accordance with paragraph 1.F.3, a full refund of any
     money paid for a work or a replacement copy, if a defect in the
     electronic work is discovered and reported to you within 90 days
     of receipt of the work.

- You comply with all other terms of this agreement for free
     distribution of Project Gutenberg-tm works.

1.E.9.  If you wish to charge a fee or distribute a Project Gutenberg-tm
electronic work or group of works on different terms than are set
forth in this agreement, you must obtain permission in writing from
both the Project Gutenberg Literary Archive Foundation and Michael
Hart, the owner of the Project Gutenberg-tm trademark.  Contact the
Foundation as set forth in Section 3 below.

1.F.

1.F.1.  Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
public domain works in creating the Project Gutenberg-tm
collection.  Despite these efforts, Project Gutenberg-tm electronic
works, and the medium on which they may be stored, may contain
"Defects," such as, but not limited to, incomplete, inaccurate or
corrupt data, transcription errors, a copyright or other intellectual
property infringement, a defective or damaged disk or other medium, a
computer virus, or computer codes that damage or cannot be read by
your equipment.

1.F.2.  LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right
of Replacement or Refund" described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg-tm trademark, and any other party distributing a Project
Gutenberg-tm electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees.  YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH F3.  YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.

1.F.3.  LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from.  If you
received the work on a physical medium, you must return the medium with
your written explanation.  The person or entity that provided you with
the defective work may elect to provide a replacement copy in lieu of a
refund.  If you received the work electronically, the person or entity
providing it to you may choose to give you a second opportunity to
receive the work electronically in lieu of a refund.  If the second copy
is also defective, you may demand a refund in writing without further
opportunities to fix the problem.

1.F.4.  Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you 'AS-IS', WITH NO OTHER
WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR ANY PURPOSE.

1.F.5.  Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of damages.
If any disclaimer or limitation set forth in this agreement violates the
law of the state applicable to this agreement, the agreement shall be
interpreted to make the maximum disclaimer or limitation permitted by
the applicable state law.  The invalidity or unenforceability of any
provision of this agreement shall not void the remaining provisions.

1.F.6.  INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg-tm electronic works in accordance
with this agreement, and any volunteers associated with the production,
promotion and distribution of Project Gutenberg-tm electronic works,
harmless from all liability, costs and expenses, including legal fees,
that arise directly or indirectly from any of the following which you do
or cause to occur: (a) distribution of this or any Project Gutenberg-tm
work, (b) alteration, modification, or additions or deletions to any
Project Gutenberg-tm work, and (c) any Defect you cause.


Section  2.  Information about the Mission of Project Gutenberg-tm

Project Gutenberg-tm is synonymous with the free distribution of
electronic works in formats readable by the widest variety of computers
including obsolete, old, middle-aged and new computers.  It exists
because of the efforts of hundreds of volunteers and donations from
people in all walks of life.

Volunteers and financial support to provide volunteers with the
assistance they need, is critical to reaching Project Gutenberg-tm's
goals and ensuring that the Project Gutenberg-tm collection will
remain freely available for generations to come.  In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg-tm and future generations.
To learn more about the Project Gutenberg Literary Archive Foundation
and how your efforts and donations can help, see Sections 3 and 4
and the Foundation web page at http://www.pglaf.org.


Section 3.  Information about the Project Gutenberg Literary Archive
Foundation

The Project Gutenberg Literary Archive Foundation is a non profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service.  The Foundation's EIN or federal tax identification
number is 64-6221541.  Its 501(c)(3) letter is posted at
http://pglaf.org/fundraising.  Contributions to the Project Gutenberg
Literary Archive Foundation are tax deductible to the full extent
permitted by U.S. federal laws and your state's laws.

The Foundation's principal office is located at 4557 Melan Dr. S.
Fairbanks, AK, 99712., but its volunteers and employees are scattered
throughout numerous locations.  Its business office is located at
809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email
business@pglaf.org.  Email contact links and up to date contact
information can be found at the Foundation's web site and official
page at http://pglaf.org

For additional contact information:
     Dr. Gregory B. Newby
     Chief Executive and Director
     gbnewby@pglaf.org

Section 4.  Information about Donations to the Project Gutenberg
Literary Archive Foundation

Project Gutenberg-tm depends upon and cannot survive without wide
spread public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine readable form accessible by the widest
array of equipment including outdated equipment.  Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.

The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States.  Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements.  We do not solicit donations in locations
where we have not received written confirmation of compliance.  To
SEND DONATIONS or determine the status of compliance for any
particular state visit http://pglaf.org

While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.

International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States.  U.S. laws alone swamp our small staff.

Please check the Project Gutenberg Web pages for current donation
methods and addresses.  Donations are accepted in a number of other
ways including checks, online payments and credit card
donations.  To donate, please visit: http://pglaf.org/donate


Section 5.  General Information About Project Gutenberg-tm electronic
works.

Professor Michael S. Hart is the originator of the Project Gutenberg-tm
concept of a library of electronic works that could be freely shared
with anyone.  For thirty years, he produced and distributed Project
Gutenberg-tm eBooks with only a loose network of volunteer support.

Project Gutenberg-tm eBooks are often created from several printed
editions, all of which are confirmed as Public Domain in the U.S.
unless a copyright notice is included.  Thus, we do not necessarily
keep eBooks in compliance with any particular paper edition.

Most people start at our Web site which has the main PG search facility:

     http://www.gutenberg.org

This Web site includes information about Project Gutenberg-tm,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.

*** END: FULL LICENSE ***